/* * Support for CompuLab EM-x270 platform * * Copyright (C) 2007 CompuLab, Ltd. * Author: Mike Rapoport * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "generic.h" /* GPIO IRQ usage */ #define EM_X270_MMC_PD (105) #define EM_X270_ETHIRQ IRQ_GPIO(41) #define EM_X270_MMC_IRQ IRQ_GPIO(13) static struct resource em_x270_dm9k_resource[] = { [0] = { .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 3, .flags = IORESOURCE_MEM, }, [1] = { .start = PXA_CS2_PHYS + 8, .end = PXA_CS2_PHYS + 8 + 0x3f, .flags = IORESOURCE_MEM, }, [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, .flags = IORESOURCE_IRQ, } }; /* for the moment we limit ourselves to 32bit IO until some * better IO routines can be written and tested */ static struct dm9000_plat_data em_x270_dm9k_platdata = { .flags = DM9000_PLATF_32BITONLY, }; /* Ethernet device */ static struct platform_device em_x270_dm9k = { .name = "dm9000", .id = 0, .num_resources = ARRAY_SIZE(em_x270_dm9k_resource), .resource = em_x270_dm9k_resource, .dev = { .platform_data = &em_x270_dm9k_platdata, } }; /* audio device */ static struct platform_device em_x270_audio = { .name = "pxa2xx-ac97", .id = -1, }; /* WM9712 touchscreen controller. Hopefully the driver will make it to * the mainstream sometime */ static struct platform_device em_x270_ts = { .name = "wm97xx-ts", .id = -1, }; /* RTC */ static struct resource em_x270_v3020_resource[] = { [0] = { .start = PXA_CS4_PHYS, .end = PXA_CS4_PHYS + 3, .flags = IORESOURCE_MEM, }, }; static struct v3020_platform_data em_x270_v3020_platdata = { .leftshift = 0, }; static struct platform_device em_x270_rtc = { .name = "v3020", .num_resources = ARRAY_SIZE(em_x270_v3020_resource), .resource = em_x270_v3020_resource, .id = -1, .dev = { .platform_data = &em_x270_v3020_platdata, } }; /* NAND flash */ #define GPIO_NAND_CS (11) #define GPIO_NAND_RB (56) static inline void nand_cs_on(void) { GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); } static void nand_cs_off(void) { dsb(); GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS); } /* hardware specific access to control-lines */ static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat, unsigned int ctrl) { struct nand_chip *this = mtd->priv; unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; dsb(); if (ctrl & NAND_CTRL_CHANGE) { if (ctrl & NAND_ALE) nandaddr |= (1 << 3); else nandaddr &= ~(1 << 3); if (ctrl & NAND_CLE) nandaddr |= (1 << 2); else nandaddr &= ~(1 << 2); if (ctrl & NAND_NCE) nand_cs_on(); else nand_cs_off(); } dsb(); this->IO_ADDR_W = (void __iomem *)nandaddr; if (dat != NAND_CMD_NONE) writel(dat, this->IO_ADDR_W); dsb(); } /* read device ready pin */ static int em_x270_nand_device_ready(struct mtd_info *mtd) { dsb(); return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB); } static struct mtd_partition em_x270_partition_info[] = { [0] = { .name = "em_x270-0", .offset = 0, .size = SZ_4M, }, [1] = { .name = "em_x270-1", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL }, }; static const char *em_x270_part_probes[] = { "cmdlinepart", NULL }; struct platform_nand_data em_x270_nand_platdata = { .chip = { .nr_chips = 1, .chip_offset = 0, .nr_partitions = ARRAY_SIZE(em_x270_partition_info), .partitions = em_x270_partition_info, .chip_delay = 20, .part_probe_types = em_x270_part_probes, }, .ctrl = { .hwcontrol = 0, .dev_ready = em_x270_nand_device_ready, .select_chip = 0, .cmd_ctrl = em_x270_nand_cmd_ctl, }, }; static struct resource em_x270_nand_resource[] = { [0] = { .start = PXA_CS1_PHYS, .end = PXA_CS1_PHYS + 12, .flags = IORESOURCE_MEM, }, }; static struct platform_device em_x270_nand = { .name = "gen_nand", .num_resources = ARRAY_SIZE(em_x270_nand_resource), .resource = em_x270_nand_resource, .id = -1, .dev = { .platform_data = &em_x270_nand_platdata, } }; /* platform devices */ static struct platform_device *platform_devices[] __initdata = { &em_x270_dm9k, &em_x270_audio, &em_x270_ts, &em_x270_rtc, &em_x270_nand, }; /* PXA27x OHCI controller setup */ static int em_x270_ohci_init(struct device *dev) { /* Set the Power Control Polarity Low */ UHCHR = (UHCHR | UHCHR_PCPL) & ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE); /* enable port 2 transiever */ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE; return 0; } static struct pxaohci_platform_data em_x270_ohci_platform_data = { .port_mode = PMM_PERPORT_MODE, .init = em_x270_ohci_init, }; static int em_x270_mci_init(struct device *dev, irq_handler_t em_x270_detect_int, void *data) { int err; /* setup GPIO for PXA27x MMC controller */ pxa_gpio_mode(GPIO32_MMCCLK_MD); pxa_gpio_mode(GPIO112_MMCCMD_MD); pxa_gpio_mode(GPIO92_MMCDAT0_MD); pxa_gpio_mode(GPIO109_MMCDAT1_MD); pxa_gpio_mode(GPIO110_MMCDAT2_MD); pxa_gpio_mode(GPIO111_MMCDAT3_MD); /* EM-X270 uses GPIO13 as SD power enable */ pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT); err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "MMC card detect", data); if (err) { printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n", __FUNCTION__, err); return err; } return 0; } static void em_x270_mci_setpower(struct device *dev, unsigned int vdd) { /* FIXME: current hardware implementation does not allow to enable/disable MMC power. This will be fixed in next HW releases, and we'll need to add implmentation here. */ return; } static void em_x270_mci_exit(struct device *dev, void *data) { free_irq(EM_X270_MMC_IRQ, data); } static struct pxamci_platform_data em_x270_mci_platform_data = { .ocr_mask = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31, .init = em_x270_mci_init, .setpower = em_x270_mci_setpower, .exit = em_x270_mci_exit, }; /* LCD 480x640 */ static struct pxafb_mode_info em_x270_lcd_mode = { .pixclock = 50000, .bpp = 16, .xres = 480, .yres = 640, .hsync_len = 8, .vsync_len = 2, .left_margin = 8, .upper_margin = 0, .right_margin = 24, .lower_margin = 4, .cmap_greyscale = 0, }; static struct pxafb_mach_info em_x270_lcd = { .modes = &em_x270_lcd_mode, .num_modes = 1, .cmap_inverse = 0, .cmap_static = 0, .lccr0 = LCCR0_PAS, .lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff), }; static void __init em_x270_init(void) { /* setup LCD */ set_pxa_fb_info(&em_x270_lcd); /* register EM-X270 platform devices */ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); /* set MCI and OHCI platform parameters */ pxa_set_mci_info(&em_x270_mci_platform_data); pxa_set_ohci_info(&em_x270_ohci_platform_data); /* setup STUART GPIOs */ pxa_gpio_mode(GPIO46_STRXD_MD); pxa_gpio_mode(GPIO47_STTXD_MD); /* setup BTUART GPIOs */ pxa_gpio_mode(GPIO42_BTRXD_MD); pxa_gpio_mode(GPIO43_BTTXD_MD); pxa_gpio_mode(GPIO44_BTCTS_MD); pxa_gpio_mode(GPIO45_BTRTS_MD); /* Setup interrupt for dm9000 */ set_irq_type(EM_X270_ETHIRQ, IRQT_RISING); } MACHINE_START(EM_X270, "Compulab EM-x270") .boot_params = 0xa0000100, .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END