/* * arch/arm/mach-pxa/include/mach/pxa-regs.h * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __PXA_REGS_H #define __PXA_REGS_H /* * PXA Chip selects */ #define PXA_CS0_PHYS 0x00000000 #define PXA_CS1_PHYS 0x04000000 #define PXA_CS2_PHYS 0x08000000 #define PXA_CS3_PHYS 0x0C000000 #define PXA_CS4_PHYS 0x10000000 #define PXA_CS5_PHYS 0x14000000 /* * Personal Computer Memory Card International Association (PCMCIA) sockets */ #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ (0x20000000 + (Nb)*PCMCIASp) #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ (_PCMCIA (Nb) + 2*PCMCIAPrtSp) #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ (_PCMCIA (Nb) + 3*PCMCIAPrtSp) #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ /* * DMA Controller */ #define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ #define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ #define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ #define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ #define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ #define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ #define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ #define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ #define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ #define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ #define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ #define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ #define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ #define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ #define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ #define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ #define DCSR(x) __REG2(0x40000000, (x) << 2) #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ #ifdef CONFIG_PXA27x #define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ #define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ #define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ #define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ #define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ #define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ #define DCSR_EORINTR (1 << 9) /* The end of Receive */ #endif #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ #define DALGN __REG(0x400000a0) /* DMA Alignment Register */ #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ #define DRCMR(n) (*(((n) < 64) ? \ &__REG2(0x40000100, ((n) & 0x3f) << 2) : \ &__REG2(0x40001100, ((n) & 0x3f) << 2))) #define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ #define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ #define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ #define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ #define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ #define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ #define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ #define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ #define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ #define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ #define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ #define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ #define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ #define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ #define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ #define DRCMR15 __REG(0x4000013c) /* Request to Channel Map Register for SSP2 receive Request */ #define DRCMR16 __REG(0x40000140) /* Request to Channel Map Register for SSP2 transmit Request */ #define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ #define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ #define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ #define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ #define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ #define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ #define DRCMR23 __REG(0x4000015c) /* Reserved */ #define DRCMR24 __REG(0x40000160) /* Reserved */ #define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ #define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ #define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ #define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ #define DRCMR29 __REG(0x40000174) /* Reserved */ #define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ #define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ #define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ #define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ #define DRCMR34 __REG(0x40000188) /* Reserved */ #define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ #define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ #define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ #define DRCMR39 __REG(0x4000019C) /* Reserved */ #define DRCMR66 __REG(0x40001108) /* Request to Channel Map Register for SSP3 receive Request */ #define DRCMR67 __REG(0x4000110C) /* Request to Channel Map Register for SSP3 transmit Request */ #define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ #define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ #define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ #define DRCMRRXSADR DRCMR2 #define DRCMRTXSADR DRCMR3 #define DRCMRRXBTRBR DRCMR4 #define DRCMRTXBTTHR DRCMR5 #define DRCMRRXFFRBR DRCMR6 #define DRCMRTXFFTHR DRCMR7 #define DRCMRRXMCDR DRCMR8 #define DRCMRRXMODR DRCMR9 #define DRCMRTXMODR DRCMR10 #define DRCMRRXPCDR DRCMR11 #define DRCMRTXPCDR DRCMR12 #define DRCMRRXSSDR DRCMR13 #define DRCMRTXSSDR DRCMR14 #define DRCMRRXSS2DR DRCMR15 #define DRCMRTXSS2DR DRCMR16 #define DRCMRRXICDR DRCMR17 #define DRCMRTXICDR DRCMR18 #define DRCMRRXSTRBR DRCMR19 #define DRCMRTXSTTHR DRCMR20 #define DRCMRRXMMC DRCMR21 #define DRCMRTXMMC DRCMR22 #define DRCMRRXSS3DR DRCMR66 #define DRCMRTXSS3DR DRCMR67 #define DRCMRUDC(x) DRCMR((x) + 24) #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ #define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ #define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ #define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ #define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ #define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ #define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ #define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ #define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ #define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ #define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ #define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ #define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ #define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ #define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ #define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ #define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ #define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ #define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ #define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ #define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ #define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ #define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ #define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ #define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ #define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ #define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ #define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ #define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ #define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ #define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ #define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ #define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ #define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ #define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ #define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ #define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ #define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ #define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ #define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ #define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ #define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ #define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ #define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ #define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ #define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ #define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ #define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ #define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ #define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ #define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ #define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ #define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ #define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ #define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ #define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ #define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ #define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ #define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ #define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ #define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ #define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ #define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ #define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ #define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ #define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ #define DDADR(x) __REG2(0x40000200, (x) << 4) #define DSADR(x) __REG2(0x40000204, (x) << 4) #define DTADR(x) __REG2(0x40000208, (x) << 4) #define DCMD(x) __REG2(0x4000020c, (x) << 4) #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ #define DDADR_STOP (1 << 0) /* Stop (read / write) */ #define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ #define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ #define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ #define DCMD_BURST16 (2 << 16) /* 16 byte burst */ #define DCMD_BURST32 (3 << 16) /* 32 byte burst */ #define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ #define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ #define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ /* * UARTs */ /* Full Function UART (FFUART) */ #define FFUART FFRBR #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ #define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ #define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ #define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ #define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ #define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ #define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ #define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ #define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ #define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ #define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ #define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ /* Bluetooth UART (BTUART) */ #define BTUART BTRBR #define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ #define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ #define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ #define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ #define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ #define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ #define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ #define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ #define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ #define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ #define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ #define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ /* Standard UART (STUART) */ #define STUART STRBR #define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ #define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ #define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ #define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ #define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ #define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ #define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ #define STLSR __REG(0x40700014) /* Line Status Register (read only) */ #define STMSR __REG(0x40700018) /* Reserved */ #define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ #define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ /* Hardware UART (HWUART) */ #define HWUART HWRBR #define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ #define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ #define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ #define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ #define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ #define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ #define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ #define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ #define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ #define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ #define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ #define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ #define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ #define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ #define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ #define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ #define IER_DMAE (1 << 7) /* DMA Requests Enable */ #define IER_UUE (1 << 6) /* UART Unit Enable */ #define IER_NRZE (1 << 5) /* NRZ coding Enable */ #define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ #define IER_MIE (1 << 3) /* Modem Interrupt Enable */ #define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ #define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ #define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ #define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ #define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ #define IIR_TOD (1 << 3) /* Time Out Detected */ #define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ #define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ #define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ #define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ #define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ #define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ #define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ #define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ #define FCR_ITL_1 (0) #define FCR_ITL_8 (FCR_ITL1) #define FCR_ITL_16 (FCR_ITL2) #define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) #define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ #define LCR_SB (1 << 6) /* Set Break */ #define LCR_STKYP (1 << 5) /* Sticky Parity */ #define LCR_EPS (1 << 4) /* Even Parity Select */ #define LCR_PEN (1 << 3) /* Parity Enable */ #define LCR_STB (1 << 2) /* Stop Bit */ #define LCR_WLS1 (1 << 1) /* Word Length Select */ #define LCR_WLS0 (1 << 0) /* Word Length Select */ #define LSR_FIFOE (1 << 7) /* FIFO Error Status */ #define LSR_TEMT (1 << 6) /* Transmitter Empty */ #define LSR_TDRQ (1 << 5) /* Transmit Data Request */ #define LSR_BI (1 << 4) /* Break Interrupt */ #define LSR_FE (1 << 3) /* Framing Error */ #define LSR_PE (1 << 2) /* Parity Error */ #define LSR_OE (1 << 1) /* Overrun Error */ #define LSR_DR (1 << 0) /* Data Ready */ #define MCR_LOOP (1 << 4) #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ #define MCR_RTS (1 << 1) /* Request to Send */ #define MCR_DTR (1 << 0) /* Data Terminal Ready */ #define MSR_DCD (1 << 7) /* Data Carrier Detect */ #define MSR_RI (1 << 6) /* Ring Indicator */ #define MSR_DSR (1 << 5) /* Data Set Ready */ #define MSR_CTS (1 << 4) /* Clear To Send */ #define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ #define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ #define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ #define MSR_DCTS (1 << 0) /* Delta Clear To Send */ /* * IrSR (Infrared Selection Register) */ #define STISR_RXPL (1 << 4) /* Receive Data Polarity */ #define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ #define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ #define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ #define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ /* * I2C registers */ #define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ #define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ #define ICR __REG(0x40301690) /* I2C Control Register - ICR */ #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ #define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ #define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ #define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ #define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ #define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */ #define ICR_START (1 << 0) /* start bit */ #define ICR_STOP (1 << 1) /* stop bit */ #define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ #define ICR_TB (1 << 3) /* transfer byte bit */ #define ICR_MA (1 << 4) /* master abort */ #define ICR_SCLE (1 << 5) /* master clock enable */ #define ICR_IUE (1 << 6) /* unit enable */ #define ICR_GCD (1 << 7) /* general call disable */ #define ICR_ITEIE (1 << 8) /* enable tx interrupts */ #define ICR_IRFIE (1 << 9) /* enable rx interrupts */ #define ICR_BEIE (1 << 10) /* enable bus error ints */ #define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ #define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ #define ICR_SADIE (1 << 13) /* slave address detected int enable */ #define ICR_UR (1 << 14) /* unit reset */ #define ISR_RWM (1 << 0) /* read/write mode */ #define ISR_ACKNAK (1 << 1) /* ack/nak status */ #define ISR_UB (1 << 2) /* unit busy */ #define ISR_IBB (1 << 3) /* bus busy */ #define ISR_SSD (1 << 4) /* slave stop detected */ #define ISR_ALD (1 << 5) /* arbitration loss detected */ #define ISR_ITE (1 << 6) /* tx buffer empty */ #define ISR_IRF (1 << 7) /* rx buffer full */ #define ISR_GCAD (1 << 8) /* general call address detected */ #define ISR_SAD (1 << 9) /* slave address detected */ #define ISR_BED (1 << 10) /* bus error no ACK/NAK */ /* * Serial Audio Controller */ #define SACR0 __REG(0x40400000) /* Global Control Register */ #define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */ #define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ #define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */ #define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */ #define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */ #define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */ #define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */ #define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */ #define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */ #define SACR0_EFWR (1 << 4) /* Enable EFWR Function */ #define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */ #define SACR0_BCKD (1 << 2) /* Bit Clock Direction */ #define SACR0_ENB (1 << 0) /* Enable I2S Link */ #define SACR1_ENLBF (1 << 5) /* Enable Loopback */ #define SACR1_DRPL (1 << 4) /* Disable Replaying Function */ #define SACR1_DREC (1 << 3) /* Disable Recording Function */ #define SACR1_AMSL (1 << 0) /* Specify Alternate Mode */ #define SASR0_I2SOFF (1 << 7) /* Controller Status */ #define SASR0_ROR (1 << 6) /* Rx FIFO Overrun */ #define SASR0_TUR (1 << 5) /* Tx FIFO Underrun */ #define SASR0_RFS (1 << 4) /* Rx FIFO Service Request */ #define SASR0_TFS (1 << 3) /* Tx FIFO Service Request */ #define SASR0_BSY (1 << 2) /* I2S Busy */ #define SASR0_RNE (1 << 1) /* Rx FIFO Not Empty */ #define SASR0_TNF (1 << 0) /* Tx FIFO Not Empty */ #define SAICR_ROR (1 << 6) /* Clear Rx FIFO Overrun Interrupt */ #define SAICR_TUR (1 << 5) /* Clear Tx FIFO Underrun Interrupt */ #define SAIMR_ROR (1 << 6) /* Enable Rx FIFO Overrun Condition Interrupt */ #define SAIMR_TUR (1 << 5) /* Enable Tx FIFO Underrun Condition Interrupt */ #define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */ #define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */ /* * AC97 Controller registers */ #define POCR __REG(0x40500000) /* PCM Out Control Register */ #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ #define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ #define PICR __REG(0x40500004) /* PCM In Control Register */ #define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ #define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ #define MCCR __REG(0x40500008) /* Mic In Control Register */ #define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ #define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ #define GCR __REG(0x4050000C) /* Global Control Register */ #ifdef CONFIG_PXA3xx #define GCR_CLKBPB (1 << 31) /* Internal clock enable */ #endif #define GCR_nDMAEN (1 << 24) /* non DMA Enable */ #define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ #define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ #define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ #define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ #define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ #define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ #define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ #define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ #define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ #define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ #define POSR __REG(0x40500010) /* PCM Out Status Register */ #define POSR_FIFOE (1 << 4) /* FIFO error */ #define POSR_FSR (1 << 2) /* FIFO Service Request */ #define PISR __REG(0x40500014) /* PCM In Status Register */ #define PISR_FIFOE (1 << 4) /* FIFO error */ #define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ #define PISR_FSR (1 << 2) /* FIFO Service Request */ #define MCSR __REG(0x40500018) /* Mic In Status Register */ #define MCSR_FIFOE (1 << 4) /* FIFO error */ #define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ #define MCSR_FSR (1 << 2) /* FIFO Service Request */ #define GSR __REG(0x4050001C) /* Global Status Register */ #define GSR_CDONE (1 << 19) /* Command Done */ #define GSR_SDONE (1 << 18) /* Status Done */ #define GSR_RDCS (1 << 15) /* Read Completion Status */ #define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ #define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ #define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ #define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ #define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ #define GSR_SCR (1 << 9) /* Secondary Codec Ready */ #define GSR_PCR (1 << 8) /* Primary Codec Ready */ #define GSR_MCINT (1 << 7) /* Mic In Interrupt */ #define GSR_POINT (1 << 6) /* PCM Out Interrupt */ #define GSR_PIINT (1 << 5) /* PCM In Interrupt */ #define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ #define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ #define GSR_MIINT (1 << 1) /* Modem In Interrupt */ #define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ #define CAR __REG(0x40500020) /* CODEC Access Register */ #define CAR_CAIP (1 << 0) /* Codec Access In Progress */ #define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ #define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ #define MOCR __REG(0x40500100) /* Modem Out Control Register */ #define MOCR_FEIE (1 << 3) /* FIFO Error */ #define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ #define MICR __REG(0x40500108) /* Modem In Control Register */ #define MICR_FEIE (1 << 3) /* FIFO Error */ #define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ #define MOSR __REG(0x40500110) /* Modem Out Status Register */ #define MOSR_FIFOE (1 << 4) /* FIFO error */ #define MOSR_FSR (1 << 2) /* FIFO Service Request */ #define MISR __REG(0x40500118) /* Modem In Status Register */ #define MISR_FIFOE (1 << 4) /* FIFO error */ #define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ #define MISR_FSR (1 << 2) /* FIFO Service Request */ #define MODR __REG(0x40500140) /* Modem FIFO Data Register */ #define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ #define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ /* * Fast Infrared Communication Port */ #define FICP __REG(0x40800000) /* Start of FICP area */ #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ #define ICDR __REG(0x4080000c) /* ICP Data Register */ #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ #define ICCR0_AME (1 << 7) /* Address match enable */ #define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */ #define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */ #define ICCR0_RXE (1 << 4) /* Receive enable */ #define ICCR0_TXE (1 << 3) /* Transmit enable */ #define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */ #define ICCR0_LBM (1 << 1) /* Loopback mode */ #define ICCR0_ITR (1 << 0) /* IrDA transmission */ #define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */ #define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */ #define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */ #define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */ #define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */ #define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */ #ifdef CONFIG_PXA27x #define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */ #endif #define ICSR0_FRE (1 << 5) /* Framing error */ #define ICSR0_RFS (1 << 4) /* Receive FIFO service request */ #define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */ #define ICSR0_RAB (1 << 2) /* Receiver abort */ #define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */ #define ICSR0_EIF (1 << 0) /* End/Error in FIFO */ #define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */ #define ICSR1_CRE (1 << 5) /* CRC error */ #define ICSR1_EOF (1 << 4) /* End of frame */ #define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */ #define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */ #define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */ #define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */ /* * Real Time Clock */ #define RCNR __REG(0x40900000) /* RTC Count Register */ #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ #define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ #define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */ #define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ #define RTSR_AL (1 << 0) /* RTC alarm detected */ /* * OS Timer & Match Registers */ #define OSMR0 __REG(0x40A00000) /* */ #define OSMR1 __REG(0x40A00004) /* */ #define OSMR2 __REG(0x40A00008) /* */ #define OSMR3 __REG(0x40A0000C) /* */ #define OSMR4 __REG(0x40A00080) /* */ #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ #define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ #define OMCR4 __REG(0x40A000C0) /* */ #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ #define OSSR_M2 (1 << 2) /* Match status channel 2 */ #define OSSR_M1 (1 << 1) /* Match status channel 1 */ #define OSSR_M0 (1 << 0) /* Match status channel 0 */ #define OWER_WME (1 << 0) /* Watchdog Match Enable */ #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ /* * Pulse Width Modulator */ #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ #define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ /* * Interrupt Controller */ #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ /* * General Purpose I/O */ #define GPIO0_BASE ((void __iomem *)io_p2v(0x40E00000)) #define GPIO1_BASE ((void __iomem *)io_p2v(0x40E00004)) #define GPIO2_BASE ((void __iomem *)io_p2v(0x40E00008)) #define GPIO3_BASE ((void __iomem *)io_p2v(0x40E00100)) #define GPLR_OFFSET 0x00 #define GPDR_OFFSET 0x0C #define GPSR_OFFSET 0x18 #define GPCR_OFFSET 0x24 #define GRER_OFFSET 0x30 #define GFER_OFFSET 0x3C #define GEDR_OFFSET 0x48 #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ #define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ #define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ #define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ #define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ #define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ #define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ #define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ #define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ #define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ #define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ #define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ #define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ #define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ #define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ #define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ #define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ #define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */ #define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ #define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ #define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ #define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ #define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ #define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ #define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ #define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ #define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ /* More handy macros. The argument is a literal GPIO number. */ #define GPIO_bit(x) (1 << ((x) & 0x1f)) #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) /* Interrupt Controller */ #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) #define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) #define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) #define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) #define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) #define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) #define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) #define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) #define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) #define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) #define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) #define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) #else #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) #define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) #define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) #define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) #endif /* * Power Manager - see pxa2xx-regs.h */ /* * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h */ /* * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h */ /* * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h */ #ifdef CONFIG_PXA27x /* Camera Interface */ #define CICR0 __REG(0x50000000) #define CICR1 __REG(0x50000004) #define CICR2 __REG(0x50000008) #define CICR3 __REG(0x5000000C) #define CICR4 __REG(0x50000010) #define CISR __REG(0x50000014) #define CIFR __REG(0x50000018) #define CITOR __REG(0x5000001C) #define CIBR0 __REG(0x50000028) #define CIBR1 __REG(0x50000030) #define CIBR2 __REG(0x50000038) #define CICR0_DMAEN (1 << 31) /* DMA request enable */ #define CICR0_PAR_EN (1 << 30) /* Parity enable */ #define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */ #define CICR0_ENB (1 << 28) /* Camera interface enable */ #define CICR0_DIS (1 << 27) /* Camera interface disable */ #define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */ #define CICR0_TOM (1 << 9) /* Time-out mask */ #define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */ #define CICR0_FEM (1 << 7) /* FIFO-empty mask */ #define CICR0_EOLM (1 << 6) /* End-of-line mask */ #define CICR0_PERRM (1 << 5) /* Parity-error mask */ #define CICR0_QDM (1 << 4) /* Quick-disable mask */ #define CICR0_CDM (1 << 3) /* Disable-done mask */ #define CICR0_SOFM (1 << 2) /* Start-of-frame mask */ #define CICR0_EOFM (1 << 1) /* End-of-frame mask */ #define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ #define CICR1_TBIT (1 << 31) /* Transparency bit */ #define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ #define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ #define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ #define CICR1_RGB_F (1 << 11) /* RGB format */ #define CICR1_YCBCR_F (1 << 10) /* YCbCr format */ #define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */ #define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */ #define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */ #define CICR1_DW (0x7 << 0) /* Data width mask */ #define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock wait count mask */ #define CICR2_ELW (0xff << 16) /* End-of-line pixel clock wait count mask */ #define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */ #define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock wait count mask */ #define CICR2_FSW (0x7 << 0) /* Frame stabilization wait count mask */ #define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock wait count mask */ #define CICR3_EFW (0xff << 16) /* End-of-frame line clock wait count mask */ #define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */ #define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock wait count mask */ #define CICR3_LPF (0x7ff << 0) /* Lines per frame mask */ #define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */ #define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */ #define CICR4_PCP (1 << 22) /* Pixel clock polarity */ #define CICR4_HSP (1 << 21) /* Horizontal sync polarity */ #define CICR4_VSP (1 << 20) /* Vertical sync polarity */ #define CICR4_MCLK_EN (1 << 19) /* MCLK enable */ #define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */ #define CICR4_DIV (0xff << 0) /* Clock divisor mask */ #define CISR_FTO (1 << 15) /* FIFO time-out */ #define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */ #define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */ #define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */ #define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */ #define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */ #define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */ #define CISR_EOL (1 << 8) /* End of line */ #define CISR_PAR_ERR (1 << 7) /* Parity error */ #define CISR_CQD (1 << 6) /* Camera interface quick disable */ #define CISR_CDD (1 << 5) /* Camera interface disable done */ #define CISR_SOF (1 << 4) /* Start of frame */ #define CISR_EOF (1 << 3) /* End of frame */ #define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */ #define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */ #define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */ #define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */ #define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */ #define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */ #define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */ #define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */ #define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */ #define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */ #define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */ #define SRAM_SIZE 0x40000 /* 4x64K */ #define SRAM_MEM_PHYS 0x5C000000 #define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */ #define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */ #define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */ #define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */ #define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */ #define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */ #define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */ #define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */ #define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */ #define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */ #define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */ #define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */ #define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */ #define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */ #define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */ #define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */ #define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */ #define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */ #define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */ #define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */ #define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */ #define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */ #define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */ #define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */ #define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */ #define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */ #define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */ #define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */ #define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */ #define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */ #define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */ #define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */ #define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */ #define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */ #define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */ #endif #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) /* * UHC: USB Host Controller (OHCI-like) register definitions */ #define UHC_BASE_PHYS (0x4C000000) #define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */ #define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */ #define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */ #define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */ #define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */ #define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */ #define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */ #define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */ #define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */ #define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */ #define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */ #define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */ #define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */ #define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */ #define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */ #define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */ #define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */ #define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */ #define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */ #define UHCRHDA_NOCP (1 << 12) /* No over current protection */ #define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */ #define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */ #define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */ #define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */ #define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */ #define UHCSTAT __REG(0x4C000060) /* UHC Status Register */ #define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */ #define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/ #define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/ #define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */ #define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */ #define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */ #define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */ #define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */ #define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */ #define UHCHR __REG(0x4C000064) /* UHC Reset Register */ #define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */ #define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */ #define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */ #define UHCHR_PCPL (1 << 7) /* Power control polarity low */ #define UHCHR_PSPL (1 << 6) /* Power sense polarity low */ #define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */ #define UHCHR_UIT (1 << 4) /* USB Interrupt Test */ #define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */ #define UHCHR_CGR (1 << 2) /* Clock Generation Reset */ #define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */ #define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */ #define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/ #define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */ #define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */ #define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */ #define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */ #define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort Interrupt Enable*/ #define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */ #define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */ #define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */ #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ /* PWRMODE register M field values */ #define PWRMODE_IDLE 0x1 #define PWRMODE_STANDBY 0x2 #define PWRMODE_SLEEP 0x3 #define PWRMODE_DEEPSLEEP 0x7 #endif