/* * OMAP clock: data structure definitions, function prototypes, shared macros * * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation * Written by Tuukka Tikkanen * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __ARCH_ARM_OMAP_CLOCK_H #define __ARCH_ARM_OMAP_CLOCK_H #include struct module; struct clk; struct clockdomain; struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); void (*find_idlest)(struct clk *, void __iomem **, u8 *, u8 *); void (*find_companion)(struct clk *, void __iomem **, u8 *); }; #ifdef CONFIG_ARCH_OMAP2PLUS struct clksel_rate { u32 val; u8 div; u8 flags; }; struct clksel { struct clk *parent; const struct clksel_rate *rates; }; /** * struct dpll_data - DPLL registers and integration data * @mult_div1_reg: register containing the DPLL M and N bitfields * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg * @clk_bypass: struct clk pointer to the clock's bypass clock input * @clk_ref: struct clk pointer to the clock's reference clock input * @control_reg: register containing the DPLL mode bitfield * @enable_mask: mask of the DPLL mode bitfield in @control_reg * @rate_tolerance: maximum variance allowed from target rate (in Hz) * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() * @max_multiplier: maximum valid non-bypass multiplier value (actual) * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() * @min_divider: minimum valid non-bypass divider value (actual) * @max_divider: maximum valid non-bypass divider value (actual) * @modes: possible values of @enable_mask * @autoidle_reg: register containing the DPLL autoidle mode bitfield * @idlest_reg: register containing the DPLL idle status bitfield * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs * @flags: DPLL type/features (see below) * * Possible values for @flags: * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) * NO_DCO_SEL: don't program DCO (only for some J-type DPLLs) * @freqsel_mask is only used on the OMAP34xx family and AM35xx. * * XXX Some DPLLs have multiple bypass inputs, so it's not technically * correct to only have one @clk_bypass pointer. * * XXX @rate_tolerance should probably be deprecated - currently there * don't seem to be any usecases for DPLL rounding that is not exact. * * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, * @last_rounded_n) should be separated from the runtime-fixed fields * and placed into a differenct structure, so that the runtime-fixed data * can be placed into read-only space. */ struct dpll_data { void __iomem *mult_div1_reg; u32 mult_mask; u32 div1_mask; struct clk *clk_bypass; struct clk *clk_ref; void __iomem *control_reg; u32 enable_mask; unsigned int rate_tolerance; unsigned long last_rounded_rate; u16 last_rounded_m; u16 max_multiplier; u8 last_rounded_n; u8 min_divider; u8 max_divider; u8 modes; #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; void __iomem *idlest_reg; u32 autoidle_mask; u32 freqsel_mask; u32 idlest_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; u8 flags; # endif }; #endif struct clk { struct list_head node; const struct clkops *ops; const char *name; struct clk *parent; struct list_head children; struct list_head sibling; /* node for children */ unsigned long rate; void __iomem *enable_reg; unsigned long (*recalc)(struct clk *); int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); __u8 enable_bit; __s8 usecount; u8 fixed_div; u8 flags; #ifdef CONFIG_ARCH_OMAP2PLUS void __iomem *clksel_reg; u32 clksel_mask; const struct clksel *clksel; struct dpll_data *dpll_data; const char *clkdm_name; struct clockdomain *clkdm; #else __u8 rate_offset; __u8 src_offset; #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) struct dentry *dent; /* For visible tree hierarchy */ #endif }; struct cpufreq_frequency_table; struct clk_functions { int (*clk_enable)(struct clk *clk); void (*clk_disable)(struct clk *clk); long (*clk_round_rate)(struct clk *clk, unsigned long rate); int (*clk_set_rate)(struct clk *clk, unsigned long rate); int (*clk_set_parent)(struct clk *clk, struct clk *parent); void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); #ifdef CONFIG_CPU_FREQ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); #endif }; extern int mpurate; extern int clk_init(struct clk_functions *custom_clocks); extern void clk_preinit(struct clk *clk); extern int clk_register(struct clk *clk); extern void clk_reparent(struct clk *child, struct clk *parent); extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); extern void recalculate_root_clocks(void); extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); unsigned long omap_fixed_divisor_recalc(struct clk *clk); #ifdef CONFIG_CPU_FREQ extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); #endif extern struct clk *omap_clk_get_by_name(const char *name); extern const struct clkops clkops_null; extern struct clk dummy_ck; /* Clock flags */ #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ #define CLOCK_IDLE_CONTROL (1 << 1) #define CLOCK_NO_IDLE_PARENT (1 << 2) #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ /* Clksel_rate flags */ #define RATE_IN_242X (1 << 0) #define RATE_IN_243X (1 << 1) #define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ #define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ #define RATE_IN_36XX (1 << 4) #define RATE_IN_4430 (1 << 5) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) #endif