if (BF52x)

source "arch/blackfin/mach-bf527/boards/Kconfig"

menu "BF527 Specific Configuration"

comment "Alternative Multiplexing Scheme"

choice
	prompt "SPORT0"
	default BF527_SPORT0_PORTG
	help
	  Select PORT used for SPORT0. See Hardware Reference Manual

config BF527_SPORT0_PORTF
	bool "PORT F"
	help
	  PORT F

config BF527_SPORT0_PORTG
	bool "PORT G"
	help
	  PORT G
endchoice

choice
	prompt "SPORT0 TSCLK Location"
	depends on BF527_SPORT0_PORTG
	default BF527_SPORT0_TSCLK_PG10
	help
	  Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual

config BF527_SPORT0_TSCLK_PG10
	bool "PORT PG10"
	help
	  PORT PG10

config BF527_SPORT0_TSCLK_PG14
	bool "PORT PG14"
	help
	  PORT PG14
endchoice

choice
	prompt "UART1"
	default BF527_UART1_PORTF
	help
	  Select PORT used for UART1. See Hardware Reference Manual

config BF527_UART1_PORTF
	bool "PORT F"
	help
	  PORT F

config BF527_UART1_PORTG
	bool "PORT G"
	help
	  PORT G
endchoice

choice
	prompt "NAND (NFC) Data"
	default BF527_NAND_D_PORTH
	help
	  Select PORT used for NAND Data Bus. See Hardware Reference Manual

config BF527_NAND_D_PORTF
	bool "PORT F"
	help
	  PORT F

config BF527_NAND_D_PORTH
	bool "PORT H"
	help
	  PORT H
endchoice

comment "Interrupt Priority Assignment"
menu "Priority"

config IRQ_PLL_WAKEUP
	int "IRQ_PLL_WAKEUP"
	default 7
config IRQ_DMA0_ERROR
	int "IRQ_DMA0_ERROR"
	default 7
config IRQ_DMAR0_BLK
	int "IRQ_DMAR0_BLK"
	default 7
config IRQ_DMAR1_BLK
	int "IRQ_DMAR1_BLK"
	default 7
config IRQ_DMAR0_OVR
	int "IRQ_DMAR0_OVR"
	default 7
config IRQ_DMAR1_OVR
	int "IRQ_DMAR1_OVR"
	default 7
config IRQ_PPI_ERROR
	int "IRQ_PPI_ERROR"
	default 7
config IRQ_MAC_ERROR
	int "IRQ_MAC_ERROR"
	default 7
config IRQ_SPORT0_ERROR
	int "IRQ_SPORT0_ERROR"
	default 7
config IRQ_SPORT1_ERROR
	int "IRQ_SPORT1_ERROR"
	default 7
config IRQ_UART0_ERROR
	int "IRQ_UART0_ERROR"
	default 7
config IRQ_UART1_ERROR
	int "IRQ_UART1_ERROR"
	default 7
config IRQ_RTC
	int "IRQ_RTC"
	default 8
config IRQ_PPI
	int "IRQ_PPI"
	default 8
config IRQ_SPORT0_RX
	int "IRQ_SPORT0_RX"
	default 9
config IRQ_SPORT0_TX
	int "IRQ_SPORT0_TX"
	default 9
config IRQ_SPORT1_RX
	int "IRQ_SPORT1_RX"
	default 9
config IRQ_SPORT1_TX
	int "IRQ_SPORT1_TX"
	default 9
config IRQ_TWI
	int "IRQ_TWI"
	default 10
config IRQ_SPI
	int "IRQ_SPI"
	default 10
config IRQ_UART0_RX
	int "IRQ_UART0_RX"
	default 10
config IRQ_UART0_TX
	int "IRQ_UART0_TX"
	default 10
config IRQ_UART1_RX
	int "IRQ_UART1_RX"
	default 10
config IRQ_UART1_TX
	int "IRQ_UART1_TX"
	default 10
config IRQ_OPTSEC
	int "IRQ_OPTSEC"
	default 11
config IRQ_CNT
	int "IRQ_CNT"
	default 11
config IRQ_MAC_RX
	int "IRQ_MAC_RX"
	default 11
config IRQ_PORTH_INTA
	int "IRQ_PORTH_INTA"
	default 11
config IRQ_MAC_TX
	int "IRQ_MAC_TX/NFC"
	default 11
config IRQ_PORTH_INTB
	int "IRQ_PORTH_INTB"
	default 11
config IRQ_TMR0
	int "IRQ_TMR0"
	default 12
config IRQ_TMR1
	int "IRQ_TMR1"
	default 12
config IRQ_TMR2
	int "IRQ_TMR2"
	default 12
config IRQ_TMR3
	int "IRQ_TMR3"
	default 12
config IRQ_TMR4
	int "IRQ_TMR4"
	default 12
config IRQ_TMR5
	int "IRQ_TMR5"
	default 12
config IRQ_TMR6
	int "IRQ_TMR6"
	default 12
config IRQ_TMR7
	int "IRQ_TMR7"
	default 12
config IRQ_PORTG_INTA
	int "IRQ_PORTG_INTA"
	default 12
config IRQ_PORTG_INTB
	int "IRQ_PORTG_INTB"
	default 12
config IRQ_MEM_DMA0
	int "IRQ_MEM_DMA0"
	default 13
config IRQ_MEM_DMA1
	int "IRQ_MEM_DMA1"
	default 13
config IRQ_WATCH
	int "IRQ_WATCH"
	default 13
config IRQ_PORTF_INTA
	int "IRQ_PORTF_INTA"
	default 13
config IRQ_PORTF_INTB
	int "IRQ_PORTF_INTB"
	default 13
config IRQ_SPI_ERROR
	int "IRQ_SPI_ERROR"
	default 7
config IRQ_NFC_ERROR
	int "IRQ_NFC_ERROR"
	default 7
config IRQ_HDMA_ERROR
	int "IRQ_HDMA_ERROR"
	default 7
config IRQ_HDMA
	int "IRQ_HDMA"
	default 7
config IRQ_USB_EINT
	int "IRQ_USB_EINT"
	default 10
config IRQ_USB_INT0
	int "IRQ_USB_INT0"
	default 10
config IRQ_USB_INT1
	int "IRQ_USB_INT1"
	default 10
config IRQ_USB_INT2
	int "IRQ_USB_INT2"
	default 10
config IRQ_USB_DMA
	int "IRQ_USB_DMA"
	default 10

	help
	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
	  This applies to all the above.  It is not recommended to assign the
	  highest priority number 7 to UART or any other device.

endmenu

endmenu

endif