/* * File: arch/blackfin/mach-common/interrupt.S * Based on: * Author: D. Jeff Dionne * Kenneth Albanowski * * Created: ? * Description: Interrupt Entries * * Modified: * Copyright 2004-2006 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see the file COPYING, or write * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include .extern _ret_from_exception #ifdef CONFIG_I_ENTRY_L1 .section .l1.text #else .text #endif .align 4 /* just in case */ /* Common interrupt entry code. First we do CLI, then push * RETI, to keep interrupts disabled, but to allow this state to be changed * by local_bh_enable. * R0 contains the interrupt number, while R1 may contain the value of IPEND, * or garbage if IPEND won't be needed by the ISR. */ __common_int_entry: [--sp] = fp; [--sp] = usp; [--sp] = i0; [--sp] = i1; [--sp] = i2; [--sp] = i3; [--sp] = m0; [--sp] = m1; [--sp] = m2; [--sp] = m3; [--sp] = l0; [--sp] = l1; [--sp] = l2; [--sp] = l3; [--sp] = b0; [--sp] = b1; [--sp] = b2; [--sp] = b3; [--sp] = a0.x; [--sp] = a0.w; [--sp] = a1.x; [--sp] = a1.w; [--sp] = LC0; [--sp] = LC1; [--sp] = LT0; [--sp] = LT1; [--sp] = LB0; [--sp] = LB1; [--sp] = ASTAT; [--sp] = r0; /* Skip reserved */ [--sp] = RETS; r2 = RETI; [--sp] = r2; [--sp] = RETX; [--sp] = RETN; [--sp] = RETE; [--sp] = SEQSTAT; [--sp] = r1; /* IPEND - R1 may or may not be set up before jumping here. */ /* Switch to other method of keeping interrupts disabled. */ #ifdef CONFIG_DEBUG_HWERR r1 = 0x3f; sti r1; #else cli r1; #endif [--sp] = RETI; /* orig_pc */ /* Clear all L registers. */ r1 = 0 (x); l0 = r1; l1 = r1; l2 = r1; l3 = r1; #ifdef CONFIG_FRAME_POINTER fp = 0; #endif ANOMALY_283_315_WORKAROUND(p5, r7) r1 = sp; SP += -12; #ifdef CONFIG_IPIPE call ___ipipe_grab_irq SP += 12; cc = r0 == 0; if cc jump .Lcommon_restore_context; #else /* CONFIG_IPIPE */ call _do_irq; SP += 12; #endif /* CONFIG_IPIPE */ call _return_from_int; .Lcommon_restore_context: RESTORE_CONTEXT rti; /* interrupt routine for ivhw - 5 */ ENTRY(_evt_ivhw) /* In case a single action kicks off multiple memory transactions, (like * a cache line fetch, - this can cause multiple hardware errors, let's * catch them all. First - make sure all the actions are complete, and * the core sees the hardware errors. */ SSYNC; SSYNC; SAVE_ALL_SYS #ifdef CONFIG_FRAME_POINTER fp = 0; #endif ANOMALY_283_315_WORKAROUND(p5, r7) /* Handle all stacked hardware errors * To make sure we don't hang forever, only do it 10 times */ R0 = 0; R2 = 10; 1: P0.L = LO(ILAT); P0.H = HI(ILAT); R1 = [P0]; CC = BITTST(R1, EVT_IVHW_P); IF ! CC JUMP 2f; /* OK a hardware error is pending - clear it */ R1 = EVT_IVHW_P; [P0] = R1; R0 += 1; CC = R1 == R2; if CC JUMP 2f; JUMP 1b; 2: # We are going to dump something out, so make sure we print IPEND properly p2.l = lo(IPEND); p2.h = hi(IPEND); r0 = [p2]; [sp + PT_IPEND] = r0; /* set the EXCAUSE to HWERR for trap_c */ r0 = [sp + PT_SEQSTAT]; R1.L = LO(VEC_HWERR); R1.H = HI(VEC_HWERR); R0 = R0 | R1; [sp + PT_SEQSTAT] = R0; r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ SP += -12; call _trap_c; SP += 12; #ifdef EBIU_ERRMST /* make sure EBIU_ERRMST is clear */ p0.l = LO(EBIU_ERRMST); p0.h = HI(EBIU_ERRMST); r0.l = (CORE_ERROR | CORE_MERROR); w[p0] = r0.l; #endif call _ret_from_exception; .Lcommon_restore_all_sys: RESTORE_ALL_SYS rti; ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi */ ENTRY(_evt_nmi) .weak _evt_nmi rtn; ENDPROC(_evt_nmi) /* interrupt routine for core timer - 6 */ ENTRY(_evt_timer) TIMER_INTERRUPT_ENTRY(EVT_IVTMR_P) /* interrupt routine for evt7 - 7 */ ENTRY(_evt_evt7) INTERRUPT_ENTRY(EVT_IVG7_P) ENTRY(_evt_evt8) INTERRUPT_ENTRY(EVT_IVG8_P) ENTRY(_evt_evt9) INTERRUPT_ENTRY(EVT_IVG9_P) ENTRY(_evt_evt10) INTERRUPT_ENTRY(EVT_IVG10_P) ENTRY(_evt_evt11) INTERRUPT_ENTRY(EVT_IVG11_P) ENTRY(_evt_evt12) INTERRUPT_ENTRY(EVT_IVG12_P) ENTRY(_evt_evt13) INTERRUPT_ENTRY(EVT_IVG13_P) /* interrupt routine for system_call - 15 */ ENTRY(_evt_system_call) SAVE_CONTEXT_SYSCALL #ifdef CONFIG_FRAME_POINTER fp = 0; #endif call _system_call; jump .Lcommon_restore_context; ENDPROC(_evt_system_call) #ifdef CONFIG_IPIPE /* * __ipipe_call_irqtail: lowers the current priority level to EVT15 * before running a user-defined routine, then raises the priority * level to EVT14 to prepare the caller for a normal interrupt * return through RTI. * * We currently use this facility in two occasions: * * - to branch to __ipipe_irq_tail_hook as requested by a high * priority domain after the pipeline delivered an interrupt, * e.g. such as Xenomai, in order to start its rescheduling * procedure, since we may not switch tasks when IRQ levels are * nested on the Blackfin, so we have to fake an interrupt return * so that we may reschedule immediately. * * - to branch to sync_root_irqs, in order to play any interrupt * pending for the root domain (i.e. the Linux kernel). This lowers * the core priority level enough so that Linux IRQ handlers may * never delay interrupts handled by high priority domains; we defer * those handlers until this point instead. This is a substitute * to using a threaded interrupt model for the Linux kernel. * * r0: address of user-defined routine * context: caller must have preempted EVT15, hw interrupts must be off. */ ENTRY(___ipipe_call_irqtail) p0 = r0; r0.l = 1f; r0.h = 1f; reti = r0; rti; 1: [--sp] = rets; [--sp] = ( r7:4, p5:3 ); sp += -12; call (p0); sp += 12; ( r7:4, p5:3 ) = [sp++]; rets = [sp++]; #ifdef CONFIG_DEBUG_HWERR /* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */ r0 = (EVT_IVG14 | EVT_IVHW | \ EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); #else /* Only enable irq14 interrupt, until we transition to _evt_evt14 */ r0 = (EVT_IVG14 | \ EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU); #endif sti r0; raise 14; /* Branches to _evt_evt14 */ 2: jump 2b; /* Likely paranoid. */ ENDPROC(___ipipe_call_irqtail) #endif /* CONFIG_IPIPE */