/* * Architecture-specific signal handling support. * * Copyright (C) 1999-2004 Hewlett-Packard Co * David Mosberger-Tang * * Derived from i386 and Alpha versions. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "sigframe.h" #define DEBUG_SIG 0 #define STACK_ALIGN 16 /* minimal alignment for stack pointer */ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) #if _NSIG_WORDS > 1 # define PUT_SIGSET(k,u) __copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t)) # define GET_SIGSET(k,u) __copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t)) #else # define PUT_SIGSET(k,u) __put_user((k)->sig[0], &(u)->sig[0]) # define GET_SIGSET(k,u) __get_user((k)->sig[0], &(u)->sig[0]) #endif long ia64_rt_sigsuspend (sigset_t __user *uset, size_t sigsetsize, struct sigscratch *scr) { sigset_t oldset, set; /* XXX: Don't preclude handling different sized sigset_t's. */ if (sigsetsize != sizeof(sigset_t)) return -EINVAL; if (!access_ok(VERIFY_READ, uset, sigsetsize)) return -EFAULT; if (GET_SIGSET(&set, uset)) return -EFAULT; sigdelsetmask(&set, ~_BLOCKABLE); spin_lock_irq(¤t->sighand->siglock); { oldset = current->blocked; current->blocked = set; recalc_sigpending(); } spin_unlock_irq(¤t->sighand->siglock); /* * The return below usually returns to the signal handler. We need to * pre-set the correct error code here to ensure that the right values * get saved in sigcontext by ia64_do_signal. */ scr->pt.r8 = EINTR; scr->pt.r10 = -1; while (1) { current->state = TASK_INTERRUPTIBLE; schedule(); if (ia64_do_signal(&oldset, scr, 1)) return -EINTR; } } asmlinkage long sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2, long arg3, long arg4, long arg5, long arg6, long arg7, struct pt_regs regs) { return do_sigaltstack(uss, uoss, regs.r12); } static long restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr) { unsigned long ip, flags, nat, um, cfm; long err; /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; /* restore scratch that always needs gets updated during signal delivery: */ err = __get_user(flags, &sc->sc_flags); err |= __get_user(nat, &sc->sc_nat); err |= __get_user(ip, &sc->sc_ip); /* instruction pointer */ err |= __get_user(cfm, &sc->sc_cfm); err |= __get_user(um, &sc->sc_um); /* user mask */ err |= __get_user(scr->pt.ar_rsc, &sc->sc_ar_rsc); err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat); err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs); err |= __get_user(scr->pt.pr, &sc->sc_pr); /* predicates */ err |= __get_user(scr->pt.b0, &sc->sc_br[0]); /* b0 (rp) */ err |= __get_user(scr->pt.b6, &sc->sc_br[6]); /* b6 */ err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8); /* r1 */ err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8); /* r8-r11 */ err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8); /* r12-r13 */ err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8); /* r15 */ scr->pt.cr_ifs = cfm | (1UL << 63); /* establish new instruction pointer: */ scr->pt.cr_iip = ip & ~0x3UL; ia64_psr(&scr->pt)->ri = ip & 0x3; scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM); scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat); if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) { /* Restore most scratch-state only when not in syscall. */ err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */ err |= __get_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */ err |= __get_user(scr->pt.r14, &sc->sc_gr[14]); /* r14 */ err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */ err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8); /* r2-r3 */ err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8); /* r16-r31 */ } if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) { struct ia64_psr *psr = ia64_psr(&scr->pt); __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16); psr->mfh = 0; /* drop signal handler's fph contents... */ if (psr->dfh) ia64_drop_fpu(current); else { /* We already own the local fph, otherwise psr->dfh wouldn't be 0. */ __ia64_load_fpu(current->thread.fph); ia64_set_local_fpu_owner(current); } } return err; } int copy_siginfo_to_user (siginfo_t __user *to, siginfo_t *from) { if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t))) return -EFAULT; if (from->si_code < 0) { if (__copy_to_user(to, from, sizeof(siginfo_t))) return -EFAULT; return 0; } else { int err; /* * If you change siginfo_t structure, please be sure this code is fixed * accordingly. It should never copy any pad contained in the structure * to avoid security leaks, but must copy the generic 3 ints plus the * relevant union member. */ err = __put_user(from->si_signo, &to->si_signo); err |= __put_user(from->si_errno, &to->si_errno); err |= __put_user((short)from->si_code, &to->si_code); switch (from->si_code >> 16) { case __SI_FAULT >> 16: err |= __put_user(from->si_flags, &to->si_flags); err |= __put_user(from->si_isr, &to->si_isr); case __SI_POLL >> 16: err |= __put_user(from->si_addr, &to->si_addr); err |= __put_user(from->si_imm, &to->si_imm); break; case __SI_TIMER >> 16: err |= __put_user(from->si_tid, &to->si_tid); err |= __put_user(from->si_overrun, &to->si_overrun); err |= __put_user(from->si_ptr, &to->si_ptr); break; case __SI_RT >> 16: /* Not generated by the kernel as of now. */ case __SI_MESGQ >> 16: err |= __put_user(from->si_uid, &to->si_uid); err |= __put_user(from->si_pid, &to->si_pid); err |= __put_user(from->si_ptr, &to->si_ptr); break; case __SI_CHLD >> 16: err |= __put_user(from->si_utime, &to->si_utime); err |= __put_user(from->si_stime, &to->si_stime); err |= __put_user(from->si_status, &to->si_status); default: err |= __put_user(from->si_uid, &to->si_uid); err |= __put_user(from->si_pid, &to->si_pid); break; } return err; } } long ia64_rt_sigreturn (struct sigscratch *scr) { extern char ia64_strace_leave_kernel, ia64_leave_kernel; struct sigcontext __user *sc; struct siginfo si; sigset_t set; long retval; sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc; /* * When we return to the previously executing context, r8 and r10 have already * been setup the way we want them. Indeed, if the signal wasn't delivered while * in a system call, we must not touch r8 or r10 as otherwise user-level state * could be corrupted. */ retval = (long) &ia64_leave_kernel; if (test_thread_flag(TIF_SYSCALL_TRACE) || test_thread_flag(TIF_SYSCALL_AUDIT)) /* * strace expects to be notified after sigreturn returns even though the * context to which we return may not be in the middle of a syscall. * Thus, the return-value that strace displays for sigreturn is * meaningless. */ retval = (long) &ia64_strace_leave_kernel; if (!access_ok(VERIFY_READ, sc, sizeof(*sc))) goto give_sigsegv; if (GET_SIGSET(&set, &sc->sc_mask)) goto give_sigsegv; sigdelsetmask(&set, ~_BLOCKABLE); spin_lock_irq(¤t->sighand->siglock); { current->blocked = set; recalc_sigpending(); } spin_unlock_irq(¤t->sighand->siglock); if (restore_sigcontext(sc, scr)) goto give_sigsegv; #if DEBUG_SIG printk("SIG return (%s:%d): sp=%lx ip=%lx\n", current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip); #endif /* * It is more difficult to avoid calling this function than to * call it and ignore errors. */ do_sigaltstack(&sc->sc_stack, NULL, scr->pt.r12); return retval; give_sigsegv: si.si_signo = SIGSEGV; si.si_errno = 0; si.si_code = SI_KERNEL; si.si_pid = current->pid; si.si_uid = current->uid; si.si_addr = sc; force_sig_info(SIGSEGV, &si, current); return retval; } /* * This does just the minimum required setup of sigcontext. * Specifically, it only installs data that is either not knowable at * the user-level or that gets modified before execution in the * trampoline starts. Everything else is done at the user-level. */ static long setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr) { unsigned long flags = 0, ifs, cfm, nat; long err; ifs = scr->pt.cr_ifs; if (on_sig_stack((unsigned long) sc)) flags |= IA64_SC_FLAG_ONSTACK; if ((ifs & (1UL << 63)) == 0) /* if cr_ifs doesn't have the valid bit set, we got here through a syscall */ flags |= IA64_SC_FLAG_IN_SYSCALL; cfm = ifs & ((1UL << 38) - 1); ia64_flush_fph(current); if ((current->thread.flags & IA64_THREAD_FPH_VALID)) { flags |= IA64_SC_FLAG_FPH_VALID; __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16); } nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat); err = __put_user(flags, &sc->sc_flags); err |= __put_user(nat, &sc->sc_nat); err |= PUT_SIGSET(mask, &sc->sc_mask); err |= __put_user(cfm, &sc->sc_cfm); err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um); err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc); err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat); /* ar.unat */ err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr); /* ar.fpsr */ err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs); err |= __put_user(scr->pt.pr, &sc->sc_pr); /* predicates */ err |= __put_user(scr->pt.b0, &sc->sc_br[0]); /* b0 (rp) */ err |= __put_user(scr->pt.b6, &sc->sc_br[6]); /* b6 */ err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8); /* r1 */ err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8); /* r8-r11 */ err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8); /* r12-r13 */ err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8); /* r15 */ err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip); if (flags & IA64_SC_FLAG_IN_SYSCALL) { /* Clear scratch registers if the signal interrupted a system call. */ err |= __put_user(0, &sc->sc_ar_ccv); /* ar.ccv */ err |= __put_user(0, &sc->sc_br[7]); /* b7 */ err |= __put_user(0, &sc->sc_gr[14]); /* r14 */ err |= __clear_user(&sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */ err |= __clear_user(&sc->sc_gr[2], 2*8); /* r2-r3 */ err |= __clear_user(&sc->sc_gr[16], 16*8); /* r16-r31 */ } else { /* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */ err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv); /* ar.ccv */ err |= __put_user(scr->pt.b7, &sc->sc_br[7]); /* b7 */ err |= __put_user(scr->pt.r14, &sc->sc_gr[14]); /* r14 */ err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */ err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8); /* r2-r3 */ err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8); /* r16-r31 */ } return err; } /* * Check whether the register-backing store is already on the signal stack. */ static inline int rbs_on_sig_stack (unsigned long bsp) { return (bsp - current->sas_ss_sp < current->sas_ss_size); } static long force_sigsegv_info (int sig, void __user *addr) { unsigned long flags; struct siginfo si; if (sig == SIGSEGV) { /* * Acquiring siglock around the sa_handler-update is almost * certainly overkill, but this isn't a * performance-critical path and I'd rather play it safe * here than having to debug a nasty race if and when * something changes in kernel/signal.c that would make it * no longer safe to modify sa_handler without holding the * lock. */ spin_lock_irqsave(¤t->sighand->siglock, flags); current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL; spin_unlock_irqrestore(¤t->sighand->siglock, flags); } si.si_signo = SIGSEGV; si.si_errno = 0; si.si_code = SI_KERNEL; si.si_pid = current->pid; si.si_uid = current->uid; si.si_addr = addr; force_sig_info(SIGSEGV, &si, current); return 0; } static long setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct sigscratch *scr) { extern char __kernel_sigtramp[]; unsigned long tramp_addr, new_rbs = 0; struct sigframe __user *frame; long err; frame = (void __user *) scr->pt.r12; tramp_addr = (unsigned long) __kernel_sigtramp; if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags((unsigned long) frame) == 0) { frame = (void __user *) ((current->sas_ss_sp + current->sas_ss_size) & ~(STACK_ALIGN - 1)); /* * We need to check for the register stack being on the signal stack * separately, because it's switched separately (memory stack is switched * in the kernel, register stack is switched in the signal trampoline). */ if (!rbs_on_sig_stack(scr->pt.ar_bspstore)) new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1); } frame = (void __user *) frame - ((sizeof(*frame) + STACK_ALIGN - 1) & ~(STACK_ALIGN - 1)); if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return force_sigsegv_info(sig, frame); err = __put_user(sig, &frame->arg0); err |= __put_user(&frame->info, &frame->arg1); err |= __put_user(&frame->sc, &frame->arg2); err |= __put_user(new_rbs, &frame->sc.sc_rbs_base); err |= __put_user(0, &frame->sc.sc_loadrs); /* initialize to zero */ err |= __put_user(ka->sa.sa_handler, &frame->handler); err |= copy_siginfo_to_user(&frame->info, info); err |= __put_user(current->sas_ss_sp, &frame->sc.sc_stack.ss_sp); err |= __put_user(current->sas_ss_size, &frame->sc.sc_stack.ss_size); err |= __put_user(sas_ss_flags(scr->pt.r12), &frame->sc.sc_stack.ss_flags); err |= setup_sigcontext(&frame->sc, set, scr); if (unlikely(err)) return force_sigsegv_info(sig, frame); scr->pt.r12 = (unsigned long) frame - 16; /* new stack pointer */ scr->pt.ar_fpsr = FPSR_DEFAULT; /* reset fpsr for signal handler */ scr->pt.cr_iip = tramp_addr; ia64_psr(&scr->pt)->ri = 0; /* start executing in first slot */ ia64_psr(&scr->pt)->be = 0; /* force little-endian byte-order */ /* * Force the interruption function mask to zero. This has no effect when a * system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is * ignored), but it has the desirable effect of making it possible to deliver a * signal with an incomplete register frame (which happens when a mandatory RSE * load faults). Furthermore, it has no negative effect on the getting the user's * dirty partition preserved, because that's governed by scr->pt.loadrs. */ scr->pt.cr_ifs = (1UL << 63); /* * Note: this affects only the NaT bits of the scratch regs (the ones saved in * pt_regs), which is exactly what we want. */ scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */ #if DEBUG_SIG printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n", current->comm, current->pid, sig, scr->pt.r12, frame->sc.sc_ip, frame->handler); #endif return 1; } static long handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct sigscratch *scr) { if (IS_IA32_PROCESS(&scr->pt)) { /* send signal to IA-32 process */ if (!ia32_setup_frame1(sig, ka, info, oldset, &scr->pt)) return 0; } else /* send signal to IA-64 process */ if (!setup_frame(sig, ka, info, oldset, scr)) return 0; if (!(ka->sa.sa_flags & SA_NODEFER)) { spin_lock_irq(¤t->sighand->siglock); { sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); sigaddset(¤t->blocked, sig); recalc_sigpending(); } spin_unlock_irq(¤t->sighand->siglock); } return 1; } /* * Note that `init' is a special process: it doesn't get signals it doesn't want to * handle. Thus you cannot kill init even with a SIGKILL even by mistake. */ long ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall) { struct k_sigaction ka; siginfo_t info; long restart = in_syscall; long errno = scr->pt.r8; # define ERR_CODE(c) (IS_IA32_PROCESS(&scr->pt) ? -(c) : (c)) /* * In the ia64_leave_kernel code path, we want the common case to go fast, which * is why we may in certain cases get here from kernel mode. Just return without * doing anything if so. */ if (!user_mode(&scr->pt)) return 0; if (!oldset) oldset = ¤t->blocked; /* * This only loops in the rare cases of handle_signal() failing, in which case we * need to push through a forced SIGSEGV. */ while (1) { int signr = get_signal_to_deliver(&info, &ka, &scr->pt, NULL); /* * get_signal_to_deliver() may have run a debugger (via notify_parent()) * and the debugger may have modified the state (e.g., to arrange for an * inferior call), thus it's important to check for restarting _after_ * get_signal_to_deliver(). */ if (IS_IA32_PROCESS(&scr->pt)) { if (in_syscall) { if (errno >= 0) restart = 0; else errno = -errno; } } else if ((long) scr->pt.r10 != -1) /* * A system calls has to be restarted only if one of the error codes * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned. If r10 * isn't -1 then r8 doesn't hold an error code and we don't need to * restart the syscall, so we can clear the "restart" flag here. */ restart = 0; if (signr <= 0) break; if (unlikely(restart)) { switch (errno) { case ERESTART_RESTARTBLOCK: case ERESTARTNOHAND: scr->pt.r8 = ERR_CODE(EINTR); /* note: scr->pt.r10 is already -1 */ break; case ERESTARTSYS: if ((ka.sa.sa_flags & SA_RESTART) == 0) { scr->pt.r8 = ERR_CODE(EINTR); /* note: scr->pt.r10 is already -1 */ break; } case ERESTARTNOINTR: if (IS_IA32_PROCESS(&scr->pt)) { scr->pt.r8 = scr->pt.r1; scr->pt.cr_iip -= 2; } else ia64_decrement_ip(&scr->pt); restart = 0; /* don't restart twice if handle_signal() fails... */ } } /* * Whee! Actually deliver the signal. If the delivery failed, we need to * continue to iterate in this loop so we can deliver the SIGSEGV... */ if (handle_signal(signr, &ka, &info, oldset, scr)) return 1; } /* Did we come from a system call? */ if (restart) { /* Restart the system call - no handlers present */ if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR || errno == ERESTART_RESTARTBLOCK) { if (IS_IA32_PROCESS(&scr->pt)) { scr->pt.r8 = scr->pt.r1; scr->pt.cr_iip -= 2; if (errno == ERESTART_RESTARTBLOCK) scr->pt.r8 = 0; /* x86 version of __NR_restart_syscall */ } else { /* * Note: the syscall number is in r15 which is saved in * pt_regs so all we need to do here is adjust ip so that * the "break" instruction gets re-executed. */ ia64_decrement_ip(&scr->pt); if (errno == ERESTART_RESTARTBLOCK) scr->pt.r15 = __NR_restart_syscall; } } } return 0; } /* Set a delayed signal that was detected in MCA/INIT/NMI/PMI context where it * could not be delivered. It is important that the target process is not * allowed to do any more work in user space. Possible cases for the target * process: * * - It is sleeping and will wake up soon. Store the data in the current task, * the signal will be sent when the current task returns from the next * interrupt. * * - It is running in user context. Store the data in the current task, the * signal will be sent when the current task returns from the next interrupt. * * - It is running in kernel context on this or another cpu and will return to * user context. Store the data in the target task, the signal will be sent * to itself when the target task returns to user space. * * - It is running in kernel context on this cpu and will sleep before * returning to user context. Because this is also the current task, the * signal will not get delivered and the task could sleep indefinitely. * Store the data in the idle task for this cpu, the signal will be sent * after the idle task processes its next interrupt. * * To cover all cases, store the data in the target task, the current task and * the idle task on this cpu. Whatever happens, the signal will be delivered * to the target task before it can do any useful user space work. Multiple * deliveries have no unwanted side effects. * * Note: This code is executed in MCA/INIT/NMI/PMI context, with interrupts * disabled. It must not take any locks nor use kernel structures or services * that require locks. */ /* To ensure that we get the right pid, check its start time. To avoid extra * include files in thread_info.h, convert the task start_time to unsigned long, * giving us a cycle time of > 580 years. */ static inline unsigned long start_time_ul(const struct task_struct *t) { return t->start_time.tv_sec * NSEC_PER_SEC + t->start_time.tv_nsec; } void set_sigdelayed(pid_t pid, int signo, int code, void __user *addr) { struct task_struct *t; unsigned long start_time = 0; int i; for (i = 1; i <= 3; ++i) { switch (i) { case 1: t = find_task_by_pid(pid); if (t) start_time = start_time_ul(t); break; case 2: t = current; break; default: t = idle_task(smp_processor_id()); break; } if (!t) return; t->thread_info->sigdelayed.signo = signo; t->thread_info->sigdelayed.code = code; t->thread_info->sigdelayed.addr = addr; t->thread_info->sigdelayed.start_time = start_time; t->thread_info->sigdelayed.pid = pid; wmb(); set_tsk_thread_flag(t, TIF_SIGDELAYED); } } /* Called from entry.S when it detects TIF_SIGDELAYED, a delayed signal that * was detected in MCA/INIT/NMI/PMI context where it could not be delivered. */ void do_sigdelayed(void) { struct siginfo siginfo; pid_t pid; struct task_struct *t; clear_thread_flag(TIF_SIGDELAYED); memset(&siginfo, 0, sizeof(siginfo)); siginfo.si_signo = current_thread_info()->sigdelayed.signo; siginfo.si_code = current_thread_info()->sigdelayed.code; siginfo.si_addr = current_thread_info()->sigdelayed.addr; pid = current_thread_info()->sigdelayed.pid; t = find_task_by_pid(pid); if (!t) return; if (current_thread_info()->sigdelayed.start_time != start_time_ul(t)) return; force_sig_info(siginfo.si_signo, &siginfo, t); }