/* * * BRIEF MODULE DESCRIPTION * Include file for Alchemy Semiconductor's Au1k CPU. * * Copyright 2000-2001, 2006-2008 MontaVista Software Inc. * Author: MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * some definitions add by takuzo@sm.sony.co.jp and sato@sm.sony.co.jp */ #ifndef _AU1000_H_ #define _AU1000_H_ #ifndef _LANGUAGE_ASSEMBLY #include #include #include #include /* cpu pipeline flush */ void static inline au_sync(void) { __asm__ volatile ("sync"); } void static inline au_sync_udelay(int us) { __asm__ volatile ("sync"); udelay(us); } void static inline au_sync_delay(int ms) { __asm__ volatile ("sync"); mdelay(ms); } void static inline au_writeb(u8 val, unsigned long reg) { *(volatile u8 *)reg = val; } void static inline au_writew(u16 val, unsigned long reg) { *(volatile u16 *)reg = val; } void static inline au_writel(u32 val, unsigned long reg) { *(volatile u32 *)reg = val; } static inline u8 au_readb(unsigned long reg) { return *(volatile u8 *)reg; } static inline u16 au_readw(unsigned long reg) { return *(volatile u16 *)reg; } static inline u32 au_readl(unsigned long reg) { return *(volatile u32 *)reg; } /* Early Au1000 have a write-only SYS_CPUPLL register. */ static inline int au1xxx_cpu_has_pll_wo(void) { switch (read_c0_prid()) { case 0x00030100: /* Au1000 DA */ case 0x00030201: /* Au1000 HA */ case 0x00030202: /* Au1000 HB */ return 1; } return 0; } /* does CPU need CONFIG[OD] set to fix tons of errata? */ static inline int au1xxx_cpu_needs_config_od(void) { /* * c0_config.od (bit 19) was write only (and read as 0) on the * early revisions of Alchemy SOCs. It disables the bus trans- * action overlapping and needs to be set to fix various errata. */ switch (read_c0_prid()) { case 0x00030100: /* Au1000 DA */ case 0x00030201: /* Au1000 HA */ case 0x00030202: /* Au1000 HB */ case 0x01030200: /* Au1500 AB */ /* * Au1100/Au1200 errata actually keep silence about this bit, * so we set it just in case for those revisions that require * it to be set according to the (now gone) cpu_table. */ case 0x02030200: /* Au1100 AB */ case 0x02030201: /* Au1100 BA */ case 0x02030202: /* Au1100 BC */ case 0x04030201: /* Au1200 AC */ return 1; } return 0; } #define ALCHEMY_CPU_UNKNOWN -1 #define ALCHEMY_CPU_AU1000 0 #define ALCHEMY_CPU_AU1500 1 #define ALCHEMY_CPU_AU1100 2 #define ALCHEMY_CPU_AU1550 3 #define ALCHEMY_CPU_AU1200 4 #define ALCHEMY_CPU_AU1300 5 static inline int alchemy_get_cputype(void) { switch (read_c0_prid() & 0xffff0000) { case 0x00030000: return ALCHEMY_CPU_AU1000; break; case 0x01030000: return ALCHEMY_CPU_AU1500; break; case 0x02030000: return ALCHEMY_CPU_AU1100; break; case 0x03030000: return ALCHEMY_CPU_AU1550; break; case 0x04030000: case 0x05030000: return ALCHEMY_CPU_AU1200; break; case 0x800c0000: return ALCHEMY_CPU_AU1300; break; } return ALCHEMY_CPU_UNKNOWN; } /* return number of uarts on a given cputype */ static inline int alchemy_get_uarts(int type) { switch (type) { case ALCHEMY_CPU_AU1000: case ALCHEMY_CPU_AU1300: return 4; case ALCHEMY_CPU_AU1500: case ALCHEMY_CPU_AU1200: return 2; case ALCHEMY_CPU_AU1100: case ALCHEMY_CPU_AU1550: return 3; } return 0; } /* enable an UART block if it isn't already */ static inline void alchemy_uart_enable(u32 uart_phys) { void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); /* reset, enable clock, deassert reset */ if ((__raw_readl(addr + 0x100) & 3) != 3) { __raw_writel(0, addr + 0x100); wmb(); __raw_writel(1, addr + 0x100); wmb(); } __raw_writel(3, addr + 0x100); wmb(); } static inline void alchemy_uart_disable(u32 uart_phys) { void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */ wmb(); } static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) { void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); int timeout, i; /* check LSR TX_EMPTY bit */ timeout = 0xffffff; do { if (__raw_readl(base + 0x1c) & 0x20) break; /* slow down */ for (i = 10000; i; i--) asm volatile ("nop"); } while (--timeout); __raw_writel(c, base + 0x04); /* tx */ wmb(); } /* return number of ethernet MACs on a given cputype */ static inline int alchemy_get_macs(int type) { switch (type) { case ALCHEMY_CPU_AU1000: case ALCHEMY_CPU_AU1500: case ALCHEMY_CPU_AU1550: return 2; case ALCHEMY_CPU_AU1100: return 1; } return 0; } /* arch/mips/au1000/common/clocks.c */ extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); extern unsigned long get_au1x00_uart_baud_base(void); extern unsigned long au1xxx_calc_clock(void); /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */ void alchemy_sleep_au1000(void); void alchemy_sleep_au1550(void); void alchemy_sleep_au1300(void); void au_sleep(void); /* USB: drivers/usb/host/alchemy-common.c */ enum alchemy_usb_block { ALCHEMY_USB_OHCI0, ALCHEMY_USB_UDC0, ALCHEMY_USB_EHCI0, ALCHEMY_USB_OTG0, ALCHEMY_USB_OHCI1, }; int alchemy_usb_control(int block, int enable); /* PCI controller platform data */ struct alchemy_pci_platdata { int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin); int (*board_pci_idsel)(unsigned int devsel, int assert); /* bits to set/clear in PCI_CONFIG register */ unsigned long pci_cfg_set; unsigned long pci_cfg_clr; }; /* Multifunction pins: Each of these pins can either be assigned to the * GPIO controller or a on-chip peripheral. * Call "au1300_pinfunc_to_dev()" or "au1300_pinfunc_to_gpio()" to * assign one of these to either the GPIO controller or the device. */ enum au1300_multifunc_pins { /* wake-from-str pins 0-3 */ AU1300_PIN_WAKE0 = 0, AU1300_PIN_WAKE1, AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, /* external clock sources for PSCs: 4-5 */ AU1300_PIN_EXTCLK0, AU1300_PIN_EXTCLK1, /* 8bit MMC interface on SD0: 6-9 */ AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, AU1300_PIN_SD0DAT7, /* aux clk input for freqgen 3: 10 */ AU1300_PIN_FG3AUX, /* UART1 pins: 11-18 */ AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, AU1300_PIN_U1RX, AU1300_PIN_U1TX, /* UART0 pins: 19-24 */ AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, /* UART2: 25-26 */ AU1300_PIN_U2RX, AU1300_PIN_U2TX, /* UART3: 27-28 */ AU1300_PIN_U3RX, AU1300_PIN_U3TX, /* LCD controller PWMs, ext pixclock: 29-31 */ AU1300_PIN_LCDPWM0, AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, /* SD1 interface: 32-37 */ AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, /* SD2 interface: 38-43 */ AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, /* PSC0/1 clocks: 44-45 */ AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, /* PSCs: 46-49/50-53/54-57/58-61 */ AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, AU1300_PIN_PSC0D1, AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, AU1300_PIN_PSC1D1, AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_PSC2D0, AU1300_PIN_PSC2D1, AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, AU1300_PIN_PSC3D1, /* PCMCIA interface: 62-70 */ AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, /* camera interface H/V sync inputs: 71-72 */ AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, /* PSC2/3 clocks: 73-74 */ AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, }; /* GPIC (Au1300) pin management: arch/mips/alchemy/common/gpioint.c */ extern void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio); extern void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio); extern void au1300_set_irq_priority(unsigned int irq, int p); extern void au1300_set_dbdma_gpio(int dchan, unsigned int gpio); /* Au1300 allows to disconnect certain blocks from internal power supply */ enum au1300_vss_block { AU1300_VSS_MPE = 0, AU1300_VSS_BSA, AU1300_VSS_GPE, AU1300_VSS_MGP, }; extern void au1300_vss_block_control(int block, int enable); /* SOC Interrupt numbers */ /* Au1000-style (IC0/1): 2 controllers with 32 sources each */ #define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) #define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) #define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) #define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) #define AU1000_MAX_INTR AU1000_INTC1_INT_LAST /* Au1300-style (GPIC): 1 controller with up to 128 sources */ #define ALCHEMY_GPIC_INT_BASE (MIPS_CPU_IRQ_BASE + 8) #define ALCHEMY_GPIC_INT_NUM 128 #define ALCHEMY_GPIC_INT_LAST (ALCHEMY_GPIC_INT_BASE + ALCHEMY_GPIC_INT_NUM - 1) enum soc_au1000_ints { AU1000_FIRST_INT = AU1000_INTC0_INT_BASE, AU1000_UART0_INT = AU1000_FIRST_INT, AU1000_UART1_INT, AU1000_UART2_INT, AU1000_UART3_INT, AU1000_SSI0_INT, AU1000_SSI1_INT, AU1000_DMA_INT_BASE, AU1000_TOY_INT = AU1000_FIRST_INT + 14, AU1000_TOY_MATCH0_INT, AU1000_TOY_MATCH1_INT, AU1000_TOY_MATCH2_INT, AU1000_RTC_INT, AU1000_RTC_MATCH0_INT, AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, AU1000_IRDA_TX_INT, AU1000_IRDA_RX_INT, AU1000_USB_DEV_REQ_INT, AU1000_USB_DEV_SUS_INT, AU1000_USB_HOST_INT, AU1000_ACSYNC_INT, AU1000_MAC0_DMA_INT, AU1000_MAC1_DMA_INT, AU1000_I2S_UO_INT, AU1000_AC97C_INT, AU1000_GPIO0_INT, AU1000_GPIO1_INT, AU1000_GPIO2_INT, AU1000_GPIO3_INT, AU1000_GPIO4_INT, AU1000_GPIO5_INT, AU1000_GPIO6_INT, AU1000_GPIO7_INT, AU1000_GPIO8_INT, AU1000_GPIO9_INT, AU1000_GPIO10_INT, AU1000_GPIO11_INT, AU1000_GPIO12_INT, AU1000_GPIO13_INT, AU1000_GPIO14_INT, AU1000_GPIO15_INT, AU1000_GPIO16_INT, AU1000_GPIO17_INT, AU1000_GPIO18_INT, AU1000_GPIO19_INT, AU1000_GPIO20_INT, AU1000_GPIO21_INT, AU1000_GPIO22_INT, AU1000_GPIO23_INT, AU1000_GPIO24_INT, AU1000_GPIO25_INT, AU1000_GPIO26_INT, AU1000_GPIO27_INT, AU1000_GPIO28_INT, AU1000_GPIO29_INT, AU1000_GPIO30_INT, AU1000_GPIO31_INT, }; enum soc_au1100_ints { AU1100_FIRST_INT = AU1000_INTC0_INT_BASE, AU1100_UART0_INT = AU1100_FIRST_INT, AU1100_UART1_INT, AU1100_SD_INT, AU1100_UART3_INT, AU1100_SSI0_INT, AU1100_SSI1_INT, AU1100_DMA_INT_BASE, AU1100_TOY_INT = AU1100_FIRST_INT + 14, AU1100_TOY_MATCH0_INT, AU1100_TOY_MATCH1_INT, AU1100_TOY_MATCH2_INT, AU1100_RTC_INT, AU1100_RTC_MATCH0_INT, AU1100_RTC_MATCH1_INT, AU1100_RTC_MATCH2_INT, AU1100_IRDA_TX_INT, AU1100_IRDA_RX_INT, AU1100_USB_DEV_REQ_INT, AU1100_USB_DEV_SUS_INT, AU1100_USB_HOST_INT, AU1100_ACSYNC_INT, AU1100_MAC0_DMA_INT, AU1100_GPIO208_215_INT, AU1100_LCD_INT, AU1100_AC97C_INT, AU1100_GPIO0_INT, AU1100_GPIO1_INT, AU1100_GPIO2_INT, AU1100_GPIO3_INT, AU1100_GPIO4_INT, AU1100_GPIO5_INT, AU1100_GPIO6_INT, AU1100_GPIO7_INT, AU1100_GPIO8_INT, AU1100_GPIO9_INT, AU1100_GPIO10_INT, AU1100_GPIO11_INT, AU1100_GPIO12_INT, AU1100_GPIO13_INT, AU1100_GPIO14_INT, AU1100_GPIO15_INT, AU1100_GPIO16_INT, AU1100_GPIO17_INT, AU1100_GPIO18_INT, AU1100_GPIO19_INT, AU1100_GPIO20_INT, AU1100_GPIO21_INT, AU1100_GPIO22_INT, AU1100_GPIO23_INT, AU1100_GPIO24_INT, AU1100_GPIO25_INT, AU1100_GPIO26_INT, AU1100_GPIO27_INT, AU1100_GPIO28_INT, AU1100_GPIO29_INT, AU1100_GPIO30_INT, AU1100_GPIO31_INT, }; enum soc_au1500_ints { AU1500_FIRST_INT = AU1000_INTC0_INT_BASE, AU1500_UART0_INT = AU1500_FIRST_INT, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_UART3_INT, AU1500_PCI_INTC, AU1500_PCI_INTD, AU1500_DMA_INT_BASE, AU1500_TOY_INT = AU1500_FIRST_INT + 14, AU1500_TOY_MATCH0_INT, AU1500_TOY_MATCH1_INT, AU1500_TOY_MATCH2_INT, AU1500_RTC_INT, AU1500_RTC_MATCH0_INT, AU1500_RTC_MATCH1_INT, AU1500_RTC_MATCH2_INT, AU1500_PCI_ERR_INT, AU1500_RESERVED_INT, AU1500_USB_DEV_REQ_INT, AU1500_USB_DEV_SUS_INT, AU1500_USB_HOST_INT, AU1500_ACSYNC_INT, AU1500_MAC0_DMA_INT, AU1500_MAC1_DMA_INT, AU1500_AC97C_INT = AU1500_FIRST_INT + 31, AU1500_GPIO0_INT, AU1500_GPIO1_INT, AU1500_GPIO2_INT, AU1500_GPIO3_INT, AU1500_GPIO4_INT, AU1500_GPIO5_INT, AU1500_GPIO6_INT, AU1500_GPIO7_INT, AU1500_GPIO8_INT, AU1500_GPIO9_INT, AU1500_GPIO10_INT, AU1500_GPIO11_INT, AU1500_GPIO12_INT, AU1500_GPIO13_INT, AU1500_GPIO14_INT, AU1500_GPIO15_INT, AU1500_GPIO200_INT, AU1500_GPIO201_INT, AU1500_GPIO202_INT, AU1500_GPIO203_INT, AU1500_GPIO20_INT, AU1500_GPIO204_INT, AU1500_GPIO205_INT, AU1500_GPIO23_INT, AU1500_GPIO24_INT, AU1500_GPIO25_INT, AU1500_GPIO26_INT, AU1500_GPIO27_INT, AU1500_GPIO28_INT, AU1500_GPIO206_INT, AU1500_GPIO207_INT, AU1500_GPIO208_215_INT, }; enum soc_au1550_ints { AU1550_FIRST_INT = AU1000_INTC0_INT_BASE, AU1550_UART0_INT = AU1550_FIRST_INT, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_DDMA_INT, AU1550_CRYPTO_INT, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_RST_INT, AU1550_UART1_INT, AU1550_UART3_INT, AU1550_PSC0_INT, AU1550_PSC1_INT, AU1550_PSC2_INT, AU1550_PSC3_INT, AU1550_TOY_INT, AU1550_TOY_MATCH0_INT, AU1550_TOY_MATCH1_INT, AU1550_TOY_MATCH2_INT, AU1550_RTC_INT, AU1550_RTC_MATCH0_INT, AU1550_RTC_MATCH1_INT, AU1550_RTC_MATCH2_INT, AU1550_NAND_INT = AU1550_FIRST_INT + 23, AU1550_USB_DEV_REQ_INT, AU1550_USB_DEV_SUS_INT, AU1550_USB_HOST_INT, AU1550_MAC0_DMA_INT, AU1550_MAC1_DMA_INT, AU1550_GPIO0_INT = AU1550_FIRST_INT + 32, AU1550_GPIO1_INT, AU1550_GPIO2_INT, AU1550_GPIO3_INT, AU1550_GPIO4_INT, AU1550_GPIO5_INT, AU1550_GPIO6_INT, AU1550_GPIO7_INT, AU1550_GPIO8_INT, AU1550_GPIO9_INT, AU1550_GPIO10_INT, AU1550_GPIO11_INT, AU1550_GPIO12_INT, AU1550_GPIO13_INT, AU1550_GPIO14_INT, AU1550_GPIO15_INT, AU1550_GPIO200_INT, AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ AU1550_GPIO16_INT, AU1550_GPIO17_INT, AU1550_GPIO20_INT, AU1550_GPIO21_INT, AU1550_GPIO22_INT, AU1550_GPIO23_INT, AU1550_GPIO24_INT, AU1550_GPIO25_INT, AU1550_GPIO26_INT, AU1550_GPIO27_INT, AU1550_GPIO28_INT, AU1550_GPIO206_INT, AU1550_GPIO207_INT, AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ }; enum soc_au1200_ints { AU1200_FIRST_INT = AU1000_INTC0_INT_BASE, AU1200_UART0_INT = AU1200_FIRST_INT, AU1200_SWT_INT, AU1200_SD_INT, AU1200_DDMA_INT, AU1200_MAE_BE_INT, AU1200_GPIO200_INT, AU1200_GPIO201_INT, AU1200_GPIO202_INT, AU1200_UART1_INT, AU1200_MAE_FE_INT, AU1200_PSC0_INT, AU1200_PSC1_INT, AU1200_AES_INT, AU1200_CAMERA_INT, AU1200_TOY_INT, AU1200_TOY_MATCH0_INT, AU1200_TOY_MATCH1_INT, AU1200_TOY_MATCH2_INT, AU1200_RTC_INT, AU1200_RTC_MATCH0_INT, AU1200_RTC_MATCH1_INT, AU1200_RTC_MATCH2_INT, AU1200_GPIO203_INT, AU1200_NAND_INT, AU1200_GPIO204_INT, AU1200_GPIO205_INT, AU1200_GPIO206_INT, AU1200_GPIO207_INT, AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ AU1200_USB_INT, AU1200_LCD_INT, AU1200_MAE_BOTH_INT, AU1200_GPIO0_INT, AU1200_GPIO1_INT, AU1200_GPIO2_INT, AU1200_GPIO3_INT, AU1200_GPIO4_INT, AU1200_GPIO5_INT, AU1200_GPIO6_INT, AU1200_GPIO7_INT, AU1200_GPIO8_INT, AU1200_GPIO9_INT, AU1200_GPIO10_INT, AU1200_GPIO11_INT, AU1200_GPIO12_INT, AU1200_GPIO13_INT, AU1200_GPIO14_INT, AU1200_GPIO15_INT, AU1200_GPIO16_INT, AU1200_GPIO17_INT, AU1200_GPIO18_INT, AU1200_GPIO19_INT, AU1200_GPIO20_INT, AU1200_GPIO21_INT, AU1200_GPIO22_INT, AU1200_GPIO23_INT, AU1200_GPIO24_INT, AU1200_GPIO25_INT, AU1200_GPIO26_INT, AU1200_GPIO27_INT, AU1200_GPIO28_INT, AU1200_GPIO29_INT, AU1200_GPIO30_INT, AU1200_GPIO31_INT, }; #endif /* !defined (_LANGUAGE_ASSEMBLY) */ /* Au1300 peripheral interrupt numbers */ #define AU1300_FIRST_INT (ALCHEMY_GPIC_INT_BASE) #define AU1300_UART1_INT (AU1300_FIRST_INT + 17) #define AU1300_UART2_INT (AU1300_FIRST_INT + 25) #define AU1300_UART3_INT (AU1300_FIRST_INT + 27) #define AU1300_SD1_INT (AU1300_FIRST_INT + 32) #define AU1300_SD2_INT (AU1300_FIRST_INT + 38) #define AU1300_PSC0_INT (AU1300_FIRST_INT + 48) #define AU1300_PSC1_INT (AU1300_FIRST_INT + 52) #define AU1300_PSC2_INT (AU1300_FIRST_INT + 56) #define AU1300_PSC3_INT (AU1300_FIRST_INT + 60) #define AU1300_NAND_INT (AU1300_FIRST_INT + 62) #define AU1300_DDMA_INT (AU1300_FIRST_INT + 75) #define AU1300_MMU_INT (AU1300_FIRST_INT + 76) #define AU1300_MPU_INT (AU1300_FIRST_INT + 77) #define AU1300_GPU_INT (AU1300_FIRST_INT + 78) #define AU1300_UDMA_INT (AU1300_FIRST_INT + 79) #define AU1300_TOY_INT (AU1300_FIRST_INT + 80) #define AU1300_TOY_MATCH0_INT (AU1300_FIRST_INT + 81) #define AU1300_TOY_MATCH1_INT (AU1300_FIRST_INT + 82) #define AU1300_TOY_MATCH2_INT (AU1300_FIRST_INT + 83) #define AU1300_RTC_INT (AU1300_FIRST_INT + 84) #define AU1300_RTC_MATCH0_INT (AU1300_FIRST_INT + 85) #define AU1300_RTC_MATCH1_INT (AU1300_FIRST_INT + 86) #define AU1300_RTC_MATCH2_INT (AU1300_FIRST_INT + 87) #define AU1300_UART0_INT (AU1300_FIRST_INT + 88) #define AU1300_SD0_INT (AU1300_FIRST_INT + 89) #define AU1300_USB_INT (AU1300_FIRST_INT + 90) #define AU1300_LCD_INT (AU1300_FIRST_INT + 91) #define AU1300_BSA_INT (AU1300_FIRST_INT + 92) #define AU1300_MPE_INT (AU1300_FIRST_INT + 93) #define AU1300_ITE_INT (AU1300_FIRST_INT + 94) #define AU1300_AES_INT (AU1300_FIRST_INT + 95) #define AU1300_CIM_INT (AU1300_FIRST_INT + 96) /**********************************************************************/ /* * Physical base addresses for integrated peripherals * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 5..au1300 */ #define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ #define AU1300_ROM_PHYS_ADDR 0x10000000 /* 5 */ #define AU1300_OTP_PHYS_ADDR 0x10002000 /* 5 */ #define AU1300_VSS_PHYS_ADDR 0x10003000 /* 5 */ #define AU1300_UART0_PHYS_ADDR 0x10100000 /* 5 */ #define AU1300_UART1_PHYS_ADDR 0x10101000 /* 5 */ #define AU1300_UART2_PHYS_ADDR 0x10102000 /* 5 */ #define AU1300_UART3_PHYS_ADDR 0x10103000 /* 5 */ #define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */ #define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */ #define AU1300_GPIC_PHYS_ADDR 0x10200000 /* 5 */ #define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */ #define AU1200_AES_PHYS_ADDR 0x10300000 /* 45 */ #define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ #define AU1300_GPU_PHYS_ADDR 0x10500000 /* 5 */ #define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ #define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ #define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ #define AU1100_SD0_PHYS_ADDR 0x10600000 /* 245 */ #define AU1300_SD1_PHYS_ADDR 0x10601000 /* 5 */ #define AU1300_SD2_PHYS_ADDR 0x10602000 /* 5 */ #define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ #define AU1300_SYS_PHYS_ADDR 0x10900000 /* 5 */ #define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */ #define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */ #define AU1300_PSC0_PHYS_ADDR 0x10A00000 /* 5 */ #define AU1300_PSC1_PHYS_ADDR 0x10A01000 /* 5 */ #define AU1300_PSC2_PHYS_ADDR 0x10A02000 /* 5 */ #define AU1300_PSC3_PHYS_ADDR 0x10A03000 /* 5 */ #define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ #define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ #define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ #define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ #define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ #define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */ #define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ #define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ #define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ #define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */ #define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */ #define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ #define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ #define AU1000_SYS_PHYS_ADDR 0x11900000 /* 012345 */ #define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */ #define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */ #define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */ #define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */ #define AU1300_UDMA_PHYS_ADDR 0x14001800 /* 5 */ #define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ #define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 345 */ #define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 345 */ #define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ #define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ #define AU1200_CIM_PHYS_ADDR 0x14004000 /* 45 */ #define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */ #define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */ #define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */ #define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */ #define AU1300_MAEITE_PHYS_ADDR 0x14010000 /* 5 */ #define AU1300_MAEMPE_PHYS_ADDR 0x14014000 /* 5 */ #define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */ #define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */ #define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */ #define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */ #define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */ #define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */ #define AU1300_USB_EHCI_PHYS_ADDR 0x14020000 /* 5 */ #define AU1300_USB_OHCI0_PHYS_ADDR 0x14020400 /* 5 */ #define AU1300_USB_OHCI1_PHYS_ADDR 0x14020800 /* 5 */ #define AU1300_USB_CTL_PHYS_ADDR 0x14021000 /* 5 */ #define AU1300_USB_OTG_PHYS_ADDR 0x14022000 /* 5 */ #define AU1300_MAEBSA_PHYS_ADDR 0x14030000 /* 5 */ #define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */ #define AU1200_LCD_PHYS_ADDR 0x15000000 /* 45 */ #define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */ #define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */ #define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */ #define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */ #define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 012345 */ #define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 012345 */ #define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 012345 */ /**********************************************************************/ /* * Au1300 GPIO+INT controller (GPIC) register offsets and bits * Registers are 128bits (0x10 bytes), divided into 4 "banks". */ #define AU1300_GPIC_PINVAL 0x0000 #define AU1300_GPIC_PINVALCLR 0x0010 #define AU1300_GPIC_IPEND 0x0020 #define AU1300_GPIC_PRIENC 0x0030 #define AU1300_GPIC_IEN 0x0040 /* int_mask in manual */ #define AU1300_GPIC_IDIS 0x0050 /* int_maskclr in manual */ #define AU1300_GPIC_DMASEL 0x0060 #define AU1300_GPIC_DEVSEL 0x0080 #define AU1300_GPIC_DEVCLR 0x0090 #define AU1300_GPIC_RSTVAL 0x00a0 /* pin configuration space. one 32bit register for up to 128 IRQs */ #define AU1300_GPIC_PINCFG 0x1000 #define GPIC_GPIO_TO_BIT(gpio) \ (1 << ((gpio) & 0x1f)) #define GPIC_GPIO_BANKOFF(gpio) \ (((gpio) >> 5) * 4) /* Pin Control bits: who owns the pin, what does it do */ #define GPIC_CFG_PC_GPIN 0 #define GPIC_CFG_PC_DEV 1 #define GPIC_CFG_PC_GPOLOW 2 #define GPIC_CFG_PC_GPOHIGH 3 #define GPIC_CFG_PC_MASK 3 /* assign pin to MIPS IRQ line */ #define GPIC_CFG_IL_SET(x) (((x) & 3) << 2) #define GPIC_CFG_IL_MASK (3 << 2) /* pin interrupt type setup */ #define GPIC_CFG_IC_OFF (0 << 4) #define GPIC_CFG_IC_LEVEL_LOW (1 << 4) #define GPIC_CFG_IC_LEVEL_HIGH (2 << 4) #define GPIC_CFG_IC_EDGE_FALL (5 << 4) #define GPIC_CFG_IC_EDGE_RISE (6 << 4) #define GPIC_CFG_IC_EDGE_BOTH (7 << 4) #define GPIC_CFG_IC_MASK (7 << 4) /* allow interrupt to wake cpu from 'wait' */ #define GPIC_CFG_IDLEWAKE (1 << 7) /***********************************************************************/ /* Au1000 SDRAM memory controller register offsets */ #define AU1000_MEM_SDMODE0 0x0000 #define AU1000_MEM_SDMODE1 0x0004 #define AU1000_MEM_SDMODE2 0x0008 #define AU1000_MEM_SDADDR0 0x000C #define AU1000_MEM_SDADDR1 0x0010 #define AU1000_MEM_SDADDR2 0x0014 #define AU1000_MEM_SDREFCFG 0x0018 #define AU1000_MEM_SDPRECMD 0x001C #define AU1000_MEM_SDAUTOREF 0x0020 #define AU1000_MEM_SDWRMD0 0x0024 #define AU1000_MEM_SDWRMD1 0x0028 #define AU1000_MEM_SDWRMD2 0x002C #define AU1000_MEM_SDSLEEP 0x0030 #define AU1000_MEM_SDSMCKE 0x0034 /* MEM_SDMODE register content definitions */ #define MEM_SDMODE_F (1 << 22) #define MEM_SDMODE_SR (1 << 21) #define MEM_SDMODE_BS (1 << 20) #define MEM_SDMODE_RS (3 << 18) #define MEM_SDMODE_CS (7 << 15) #define MEM_SDMODE_TRAS (15 << 11) #define MEM_SDMODE_TMRD (3 << 9) #define MEM_SDMODE_TWR (3 << 7) #define MEM_SDMODE_TRP (3 << 5) #define MEM_SDMODE_TRCD (3 << 3) #define MEM_SDMODE_TCL (7 << 0) #define MEM_SDMODE_BS_2Bank (0 << 20) #define MEM_SDMODE_BS_4Bank (1 << 20) #define MEM_SDMODE_RS_11Row (0 << 18) #define MEM_SDMODE_RS_12Row (1 << 18) #define MEM_SDMODE_RS_13Row (2 << 18) #define MEM_SDMODE_RS_N(N) ((N) << 18) #define MEM_SDMODE_CS_7Col (0 << 15) #define MEM_SDMODE_CS_8Col (1 << 15) #define MEM_SDMODE_CS_9Col (2 << 15) #define MEM_SDMODE_CS_10Col (3 << 15) #define MEM_SDMODE_CS_11Col (4 << 15) #define MEM_SDMODE_CS_N(N) ((N) << 15) #define MEM_SDMODE_TRAS_N(N) ((N) << 11) #define MEM_SDMODE_TMRD_N(N) ((N) << 9) #define MEM_SDMODE_TWR_N(N) ((N) << 7) #define MEM_SDMODE_TRP_N(N) ((N) << 5) #define MEM_SDMODE_TRCD_N(N) ((N) << 3) #define MEM_SDMODE_TCL_N(N) ((N) << 0) /* MEM_SDADDR register contents definitions */ #define MEM_SDADDR_E (1 << 20) #define MEM_SDADDR_CSBA (0x03FF << 10) #define MEM_SDADDR_CSMASK (0x03FF << 0) #define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12) #define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22) /* MEM_SDREFCFG register content definitions */ #define MEM_SDREFCFG_TRC (15 << 28) #define MEM_SDREFCFG_TRPM (3 << 26) #define MEM_SDREFCFG_E (1 << 25) #define MEM_SDREFCFG_RE (0x1ffffff << 0) #define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC) #define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM) #define MEM_SDREFCFG_REF_N(N) (N) /* Au1550 SDRAM Register Offsets */ #define AU1550_MEM_SDMODE0 0x0800 #define AU1550_MEM_SDMODE1 0x0808 #define AU1550_MEM_SDMODE2 0x0810 #define AU1550_MEM_SDADDR0 0x0820 #define AU1550_MEM_SDADDR1 0x0828 #define AU1550_MEM_SDADDR2 0x0830 #define AU1550_MEM_SDCONFIGA 0x0840 #define AU1550_MEM_SDCONFIGB 0x0848 #define AU1550_MEM_SDSTAT 0x0850 #define AU1550_MEM_SDERRADDR 0x0858 #define AU1550_MEM_SDSTRIDE0 0x0860 #define AU1550_MEM_SDSTRIDE1 0x0868 #define AU1550_MEM_SDSTRIDE2 0x0870 #define AU1550_MEM_SDWRMD0 0x0880 #define AU1550_MEM_SDWRMD1 0x0888 #define AU1550_MEM_SDWRMD2 0x0890 #define AU1550_MEM_SDPRECMD 0x08C0 #define AU1550_MEM_SDAUTOREF 0x08C8 #define AU1550_MEM_SDSREF 0x08D0 #define AU1550_MEM_SDSLEEP MEM_SDSREF /* Static Bus Controller */ #define MEM_STCFG0 0xB4001000 #define MEM_STTIME0 0xB4001004 #define MEM_STADDR0 0xB4001008 #define MEM_STCFG1 0xB4001010 #define MEM_STTIME1 0xB4001014 #define MEM_STADDR1 0xB4001018 #define MEM_STCFG2 0xB4001020 #define MEM_STTIME2 0xB4001024 #define MEM_STADDR2 0xB4001028 #define MEM_STCFG3 0xB4001030 #define MEM_STTIME3 0xB4001034 #define MEM_STADDR3 0xB4001038 #define MEM_STNDCTL 0xB4001100 #define MEM_STSTAT 0xB4001104 #define MEM_STNAND_CMD 0x0 #define MEM_STNAND_ADDR 0x4 #define MEM_STNAND_DATA 0x20 /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) # define SYS_CNTRL_E1S (1 << 23) # define SYS_CNTRL_T1S (1 << 20) # define SYS_CNTRL_M21 (1 << 19) # define SYS_CNTRL_M11 (1 << 18) # define SYS_CNTRL_M01 (1 << 17) # define SYS_CNTRL_C1S (1 << 16) # define SYS_CNTRL_BP (1 << 14) # define SYS_CNTRL_EN1 (1 << 13) # define SYS_CNTRL_BT1 (1 << 12) # define SYS_CNTRL_EN0 (1 << 11) # define SYS_CNTRL_BT0 (1 << 10) # define SYS_CNTRL_E0 (1 << 8) # define SYS_CNTRL_E0S (1 << 7) # define SYS_CNTRL_32S (1 << 5) # define SYS_CNTRL_T0S (1 << 4) # define SYS_CNTRL_M20 (1 << 3) # define SYS_CNTRL_M10 (1 << 2) # define SYS_CNTRL_M00 (1 << 1) # define SYS_CNTRL_C0S (1 << 0) /* Programmable Counter 0 Registers */ #define SYS_TOYTRIM (SYS_BASE + 0) #define SYS_TOYWRITE (SYS_BASE + 4) #define SYS_TOYMATCH0 (SYS_BASE + 8) #define SYS_TOYMATCH1 (SYS_BASE + 0xC) #define SYS_TOYMATCH2 (SYS_BASE + 0x10) #define SYS_TOYREAD (SYS_BASE + 0x40) /* Programmable Counter 1 Registers */ #define SYS_RTCTRIM (SYS_BASE + 0x44) #define SYS_RTCWRITE (SYS_BASE + 0x48) #define SYS_RTCMATCH0 (SYS_BASE + 0x4C) #define SYS_RTCMATCH1 (SYS_BASE + 0x50) #define SYS_RTCMATCH2 (SYS_BASE + 0x54) #define SYS_RTCREAD (SYS_BASE + 0x58) /* I2S Controller */ #define I2S_DATA 0xB1000000 # define I2S_DATA_MASK 0xffffff #define I2S_CONFIG 0xB1000004 # define I2S_CONFIG_XU (1 << 25) # define I2S_CONFIG_XO (1 << 24) # define I2S_CONFIG_RU (1 << 23) # define I2S_CONFIG_RO (1 << 22) # define I2S_CONFIG_TR (1 << 21) # define I2S_CONFIG_TE (1 << 20) # define I2S_CONFIG_TF (1 << 19) # define I2S_CONFIG_RR (1 << 18) # define I2S_CONFIG_RE (1 << 17) # define I2S_CONFIG_RF (1 << 16) # define I2S_CONFIG_PD (1 << 11) # define I2S_CONFIG_LB (1 << 10) # define I2S_CONFIG_IC (1 << 9) # define I2S_CONFIG_FM_BIT 7 # define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT) # define I2S_CONFIG_TN (1 << 6) # define I2S_CONFIG_RN (1 << 5) # define I2S_CONFIG_SZ_BIT 0 # define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT) #define I2S_CONTROL 0xB1000008 # define I2S_CONTROL_D (1 << 1) # define I2S_CONTROL_CE (1 << 0) /* Ethernet Controllers */ /* 4 byte offsets from AU1000_ETH_BASE */ #define MAC_CONTROL 0x0 # define MAC_RX_ENABLE (1 << 2) # define MAC_TX_ENABLE (1 << 3) # define MAC_DEF_CHECK (1 << 5) # define MAC_SET_BL(X) (((X) & 0x3) << 6) # define MAC_AUTO_PAD (1 << 8) # define MAC_DISABLE_RETRY (1 << 10) # define MAC_DISABLE_BCAST (1 << 11) # define MAC_LATE_COL (1 << 12) # define MAC_HASH_MODE (1 << 13) # define MAC_HASH_ONLY (1 << 15) # define MAC_PASS_ALL (1 << 16) # define MAC_INVERSE_FILTER (1 << 17) # define MAC_PROMISCUOUS (1 << 18) # define MAC_PASS_ALL_MULTI (1 << 19) # define MAC_FULL_DUPLEX (1 << 20) # define MAC_NORMAL_MODE 0 # define MAC_INT_LOOPBACK (1 << 21) # define MAC_EXT_LOOPBACK (1 << 22) # define MAC_DISABLE_RX_OWN (1 << 23) # define MAC_BIG_ENDIAN (1 << 30) # define MAC_RX_ALL (1 << 31) #define MAC_ADDRESS_HIGH 0x4 #define MAC_ADDRESS_LOW 0x8 #define MAC_MCAST_HIGH 0xC #define MAC_MCAST_LOW 0x10 #define MAC_MII_CNTRL 0x14 # define MAC_MII_BUSY (1 << 0) # define MAC_MII_READ 0 # define MAC_MII_WRITE (1 << 1) # define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6) # define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11) #define MAC_MII_DATA 0x18 #define MAC_FLOW_CNTRL 0x1C # define MAC_FLOW_CNTRL_BUSY (1 << 0) # define MAC_FLOW_CNTRL_ENABLE (1 << 1) # define MAC_PASS_CONTROL (1 << 2) # define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16) #define MAC_VLAN1_TAG 0x20 #define MAC_VLAN2_TAG 0x24 /* Ethernet Controller Enable */ # define MAC_EN_CLOCK_ENABLE (1 << 0) # define MAC_EN_RESET0 (1 << 1) # define MAC_EN_TOSS (0 << 2) # define MAC_EN_CACHEABLE (1 << 3) # define MAC_EN_RESET1 (1 << 4) # define MAC_EN_RESET2 (1 << 5) # define MAC_DMA_RESET (1 << 6) /* Ethernet Controller DMA Channels */ #define MAC0_TX_DMA_ADDR 0xB4004000 #define MAC1_TX_DMA_ADDR 0xB4004200 /* offsets from MAC_TX_RING_ADDR address */ #define MAC_TX_BUFF0_STATUS 0x0 # define TX_FRAME_ABORTED (1 << 0) # define TX_JAB_TIMEOUT (1 << 1) # define TX_NO_CARRIER (1 << 2) # define TX_LOSS_CARRIER (1 << 3) # define TX_EXC_DEF (1 << 4) # define TX_LATE_COLL_ABORT (1 << 5) # define TX_EXC_COLL (1 << 6) # define TX_UNDERRUN (1 << 7) # define TX_DEFERRED (1 << 8) # define TX_LATE_COLL (1 << 9) # define TX_COLL_CNT_MASK (0xF << 10) # define TX_PKT_RETRY (1 << 31) #define MAC_TX_BUFF0_ADDR 0x4 # define TX_DMA_ENABLE (1 << 0) # define TX_T_DONE (1 << 1) # define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) #define MAC_TX_BUFF0_LEN 0x8 #define MAC_TX_BUFF1_STATUS 0x10 #define MAC_TX_BUFF1_ADDR 0x14 #define MAC_TX_BUFF1_LEN 0x18 #define MAC_TX_BUFF2_STATUS 0x20 #define MAC_TX_BUFF2_ADDR 0x24 #define MAC_TX_BUFF2_LEN 0x28 #define MAC_TX_BUFF3_STATUS 0x30 #define MAC_TX_BUFF3_ADDR 0x34 #define MAC_TX_BUFF3_LEN 0x38 #define MAC0_RX_DMA_ADDR 0xB4004100 #define MAC1_RX_DMA_ADDR 0xB4004300 /* offsets from MAC_RX_RING_ADDR */ #define MAC_RX_BUFF0_STATUS 0x0 # define RX_FRAME_LEN_MASK 0x3fff # define RX_WDOG_TIMER (1 << 14) # define RX_RUNT (1 << 15) # define RX_OVERLEN (1 << 16) # define RX_COLL (1 << 17) # define RX_ETHER (1 << 18) # define RX_MII_ERROR (1 << 19) # define RX_DRIBBLING (1 << 20) # define RX_CRC_ERROR (1 << 21) # define RX_VLAN1 (1 << 22) # define RX_VLAN2 (1 << 23) # define RX_LEN_ERROR (1 << 24) # define RX_CNTRL_FRAME (1 << 25) # define RX_U_CNTRL_FRAME (1 << 26) # define RX_MCAST_FRAME (1 << 27) # define RX_BCAST_FRAME (1 << 28) # define RX_FILTER_FAIL (1 << 29) # define RX_PACKET_FILTER (1 << 30) # define RX_MISSED_FRAME (1 << 31) # define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME) #define MAC_RX_BUFF0_ADDR 0x4 # define RX_DMA_ENABLE (1 << 0) # define RX_T_DONE (1 << 1) # define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3) # define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0) #define MAC_RX_BUFF1_STATUS 0x10 #define MAC_RX_BUFF1_ADDR 0x14 #define MAC_RX_BUFF2_STATUS 0x20 #define MAC_RX_BUFF2_ADDR 0x24 #define MAC_RX_BUFF3_STATUS 0x30 #define MAC_RX_BUFF3_ADDR 0x34 #define UART_RX 0 /* Receive buffer */ #define UART_TX 4 /* Transmit buffer */ #define UART_IER 8 /* Interrupt Enable Register */ #define UART_IIR 0xC /* Interrupt ID Register */ #define UART_FCR 0x10 /* FIFO Control Register */ #define UART_LCR 0x14 /* Line Control Register */ #define UART_MCR 0x18 /* Modem Control Register */ #define UART_LSR 0x1C /* Line Status Register */ #define UART_MSR 0x20 /* Modem Status Register */ #define UART_CLK 0x28 /* Baud Rate Clock Divider */ #define UART_MOD_CNTRL 0x100 /* Module Control */ /* SSIO */ #define SSI0_STATUS 0xB1600000 # define SSI_STATUS_BF (1 << 4) # define SSI_STATUS_OF (1 << 3) # define SSI_STATUS_UF (1 << 2) # define SSI_STATUS_D (1 << 1) # define SSI_STATUS_B (1 << 0) #define SSI0_INT 0xB1600004 # define SSI_INT_OI (1 << 3) # define SSI_INT_UI (1 << 2) # define SSI_INT_DI (1 << 1) #define SSI0_INT_ENABLE 0xB1600008 # define SSI_INTE_OIE (1 << 3) # define SSI_INTE_UIE (1 << 2) # define SSI_INTE_DIE (1 << 1) #define SSI0_CONFIG 0xB1600020 # define SSI_CONFIG_AO (1 << 24) # define SSI_CONFIG_DO (1 << 23) # define SSI_CONFIG_ALEN_BIT 20 # define SSI_CONFIG_ALEN_MASK (0x7 << 20) # define SSI_CONFIG_DLEN_BIT 16 # define SSI_CONFIG_DLEN_MASK (0x7 << 16) # define SSI_CONFIG_DD (1 << 11) # define SSI_CONFIG_AD (1 << 10) # define SSI_CONFIG_BM_BIT 8 # define SSI_CONFIG_BM_MASK (0x3 << 8) # define SSI_CONFIG_CE (1 << 7) # define SSI_CONFIG_DP (1 << 6) # define SSI_CONFIG_DL (1 << 5) # define SSI_CONFIG_EP (1 << 4) #define SSI0_ADATA 0xB1600024 # define SSI_AD_D (1 << 24) # define SSI_AD_ADDR_BIT 16 # define SSI_AD_ADDR_MASK (0xff << 16) # define SSI_AD_DATA_BIT 0 # define SSI_AD_DATA_MASK (0xfff << 0) #define SSI0_CLKDIV 0xB1600028 #define SSI0_CONTROL 0xB1600100 # define SSI_CONTROL_CD (1 << 1) # define SSI_CONTROL_E (1 << 0) /* SSI1 */ #define SSI1_STATUS 0xB1680000 #define SSI1_INT 0xB1680004 #define SSI1_INT_ENABLE 0xB1680008 #define SSI1_CONFIG 0xB1680020 #define SSI1_ADATA 0xB1680024 #define SSI1_CLKDIV 0xB1680028 #define SSI1_ENABLE 0xB1680100 /* * Register content definitions */ #define SSI_STATUS_BF (1 << 4) #define SSI_STATUS_OF (1 << 3) #define SSI_STATUS_UF (1 << 2) #define SSI_STATUS_D (1 << 1) #define SSI_STATUS_B (1 << 0) /* SSI_INT */ #define SSI_INT_OI (1 << 3) #define SSI_INT_UI (1 << 2) #define SSI_INT_DI (1 << 1) /* SSI_INTEN */ #define SSI_INTEN_OIE (1 << 3) #define SSI_INTEN_UIE (1 << 2) #define SSI_INTEN_DIE (1 << 1) #define SSI_CONFIG_AO (1 << 24) #define SSI_CONFIG_DO (1 << 23) #define SSI_CONFIG_ALEN (7 << 20) #define SSI_CONFIG_DLEN (15 << 16) #define SSI_CONFIG_DD (1 << 11) #define SSI_CONFIG_AD (1 << 10) #define SSI_CONFIG_BM (3 << 8) #define SSI_CONFIG_CE (1 << 7) #define SSI_CONFIG_DP (1 << 6) #define SSI_CONFIG_DL (1 << 5) #define SSI_CONFIG_EP (1 << 4) #define SSI_CONFIG_ALEN_N(N) ((N-1) << 20) #define SSI_CONFIG_DLEN_N(N) ((N-1) << 16) #define SSI_CONFIG_BM_HI (0 << 8) #define SSI_CONFIG_BM_LO (1 << 8) #define SSI_CONFIG_BM_CY (2 << 8) #define SSI_ADATA_D (1 << 24) #define SSI_ADATA_ADDR (0xFF << 16) #define SSI_ADATA_DATA 0x0FFF #define SSI_ADATA_ADDR_N(N) (N << 16) #define SSI_ENABLE_CD (1 << 1) #define SSI_ENABLE_E (1 << 0) /* * The IrDA peripheral has an IRFIRSEL pin, but on the DB/PB boards it's not * used to select FIR/SIR mode on the transceiver but as a GPIO. Instead a * CPLD has to be told about the mode. */ #define AU1000_IRDA_PHY_MODE_OFF 0 #define AU1000_IRDA_PHY_MODE_SIR 1 #define AU1000_IRDA_PHY_MODE_FIR 2 struct au1k_irda_platform_data { void(*set_phy_mode)(int mode); }; /* GPIO */ #define SYS_PINFUNC 0xB190002C # define SYS_PF_USB (1 << 15) /* 2nd USB device/host */ # define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */ # define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */ # define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */ # define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */ # define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */ # define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */ # define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */ # define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */ # define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */ # define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */ # define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */ # define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */ # define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */ # define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */ # define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */ /* Au1100 only */ # define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */ # define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */ # define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */ # define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */ /* Au1550 only. Redefines lots of pins */ # define SYS_PF_PSC2_MASK (7 << 17) # define SYS_PF_PSC2_AC97 0 # define SYS_PF_PSC2_SPI 0 # define SYS_PF_PSC2_I2S (1 << 17) # define SYS_PF_PSC2_SMBUS (3 << 17) # define SYS_PF_PSC2_GPIO (7 << 17) # define SYS_PF_PSC3_MASK (7 << 20) # define SYS_PF_PSC3_AC97 0 # define SYS_PF_PSC3_SPI 0 # define SYS_PF_PSC3_I2S (1 << 20) # define SYS_PF_PSC3_SMBUS (3 << 20) # define SYS_PF_PSC3_GPIO (7 << 20) # define SYS_PF_PSC1_S1 (1 << 1) # define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) /* Au1200 only */ #define SYS_PINFUNC_DMA (1 << 31) #define SYS_PINFUNC_S0A (1 << 30) #define SYS_PINFUNC_S1A (1 << 29) #define SYS_PINFUNC_LP0 (1 << 28) #define SYS_PINFUNC_LP1 (1 << 27) #define SYS_PINFUNC_LD16 (1 << 26) #define SYS_PINFUNC_LD8 (1 << 25) #define SYS_PINFUNC_LD1 (1 << 24) #define SYS_PINFUNC_LD0 (1 << 23) #define SYS_PINFUNC_P1A (3 << 21) #define SYS_PINFUNC_P1B (1 << 20) #define SYS_PINFUNC_FS3 (1 << 19) #define SYS_PINFUNC_P0A (3 << 17) #define SYS_PINFUNC_CS (1 << 16) #define SYS_PINFUNC_CIM (1 << 15) #define SYS_PINFUNC_P1C (1 << 14) #define SYS_PINFUNC_U1T (1 << 12) #define SYS_PINFUNC_U1R (1 << 11) #define SYS_PINFUNC_EX1 (1 << 10) #define SYS_PINFUNC_EX0 (1 << 9) #define SYS_PINFUNC_U0R (1 << 8) #define SYS_PINFUNC_MC (1 << 7) #define SYS_PINFUNC_S0B (1 << 6) #define SYS_PINFUNC_S0C (1 << 5) #define SYS_PINFUNC_P0B (1 << 4) #define SYS_PINFUNC_U0T (1 << 3) #define SYS_PINFUNC_S1B (1 << 2) /* Power Management */ #define SYS_SCRATCH0 0xB1900018 #define SYS_SCRATCH1 0xB190001C #define SYS_WAKEMSK 0xB1900034 #define SYS_ENDIAN 0xB1900038 #define SYS_POWERCTRL 0xB190003C #define SYS_WAKESRC 0xB190005C #define SYS_SLPPWR 0xB1900078 #define SYS_SLEEP 0xB190007C #define SYS_WAKEMSK_D2 (1 << 9) #define SYS_WAKEMSK_M2 (1 << 8) #define SYS_WAKEMSK_GPIO(x) (1 << (x)) /* Clock Controller */ #define SYS_FREQCTRL0 0xB1900020 # define SYS_FC_FRDIV2_BIT 22 # define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT) # define SYS_FC_FE2 (1 << 21) # define SYS_FC_FS2 (1 << 20) # define SYS_FC_FRDIV1_BIT 12 # define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT) # define SYS_FC_FE1 (1 << 11) # define SYS_FC_FS1 (1 << 10) # define SYS_FC_FRDIV0_BIT 2 # define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT) # define SYS_FC_FE0 (1 << 1) # define SYS_FC_FS0 (1 << 0) #define SYS_FREQCTRL1 0xB1900024 # define SYS_FC_FRDIV5_BIT 22 # define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT) # define SYS_FC_FE5 (1 << 21) # define SYS_FC_FS5 (1 << 20) # define SYS_FC_FRDIV4_BIT 12 # define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT) # define SYS_FC_FE4 (1 << 11) # define SYS_FC_FS4 (1 << 10) # define SYS_FC_FRDIV3_BIT 2 # define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT) # define SYS_FC_FE3 (1 << 1) # define SYS_FC_FS3 (1 << 0) #define SYS_CLKSRC 0xB1900028 # define SYS_CS_ME1_BIT 27 # define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT) # define SYS_CS_DE1 (1 << 26) # define SYS_CS_CE1 (1 << 25) # define SYS_CS_ME0_BIT 22 # define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT) # define SYS_CS_DE0 (1 << 21) # define SYS_CS_CE0 (1 << 20) # define SYS_CS_MI2_BIT 17 # define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT) # define SYS_CS_DI2 (1 << 16) # define SYS_CS_CI2 (1 << 15) # define SYS_CS_ML_BIT 7 # define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT) # define SYS_CS_DL (1 << 6) # define SYS_CS_CL (1 << 5) # define SYS_CS_MUH_BIT 12 # define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT) # define SYS_CS_DUH (1 << 11) # define SYS_CS_CUH (1 << 10) # define SYS_CS_MUD_BIT 7 # define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT) # define SYS_CS_DUD (1 << 6) # define SYS_CS_CUD (1 << 5) # define SYS_CS_MIR_BIT 2 # define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT) # define SYS_CS_DIR (1 << 1) # define SYS_CS_CIR (1 << 0) # define SYS_CS_MUX_AUX 0x1 # define SYS_CS_MUX_FQ0 0x2 # define SYS_CS_MUX_FQ1 0x3 # define SYS_CS_MUX_FQ2 0x4 # define SYS_CS_MUX_FQ3 0x5 # define SYS_CS_MUX_FQ4 0x6 # define SYS_CS_MUX_FQ5 0x7 #define SYS_CPUPLL 0xB1900060 #define SYS_AUXPLL 0xB1900064 /* AC97 Controller */ #define AC97C_CONFIG 0xB0000000 # define AC97C_RECV_SLOTS_BIT 13 # define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT) # define AC97C_XMIT_SLOTS_BIT 3 # define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT) # define AC97C_SG (1 << 2) # define AC97C_SYNC (1 << 1) # define AC97C_RESET (1 << 0) #define AC97C_STATUS 0xB0000004 # define AC97C_XU (1 << 11) # define AC97C_XO (1 << 10) # define AC97C_RU (1 << 9) # define AC97C_RO (1 << 8) # define AC97C_READY (1 << 7) # define AC97C_CP (1 << 6) # define AC97C_TR (1 << 5) # define AC97C_TE (1 << 4) # define AC97C_TF (1 << 3) # define AC97C_RR (1 << 2) # define AC97C_RE (1 << 1) # define AC97C_RF (1 << 0) #define AC97C_DATA 0xB0000008 #define AC97C_CMD 0xB000000C # define AC97C_WD_BIT 16 # define AC97C_READ (1 << 7) # define AC97C_INDEX_MASK 0x7f #define AC97C_CNTRL 0xB0000010 # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) /* The PCI chip selects are outside the 32bit space, and since we can't * just program the 36bit addresses into BARs, we have to take a chunk * out of the 32bit space and reserve it for PCI. When these addresses * are ioremap()ed, they'll be fixed up to the real 36bit address before * being passed to the real ioremap function. */ #define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4) #define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF) /* for PCI IO it's simpler because we get to do the ioremap ourselves and then * adjust the device's resources. */ #define ALCHEMY_PCI_IOWIN_START 0x00001000 #define ALCHEMY_PCI_IOWIN_END 0x0000FFFF #ifdef CONFIG_PCI #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL #else /* Don't allow any legacy ports probing */ #define IOPORT_RESOURCE_START 0x10000000 #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xfffffffffULL #endif /* PCI controller block register offsets */ #define PCI_REG_CMEM 0x0000 #define PCI_REG_CONFIG 0x0004 #define PCI_REG_B2BMASK_CCH 0x0008 #define PCI_REG_B2BBASE0_VID 0x000C #define PCI_REG_B2BBASE1_SID 0x0010 #define PCI_REG_MWMASK_DEV 0x0014 #define PCI_REG_MWBASE_REV_CCL 0x0018 #define PCI_REG_ERR_ADDR 0x001C #define PCI_REG_SPEC_INTACK 0x0020 #define PCI_REG_ID 0x0100 #define PCI_REG_STATCMD 0x0104 #define PCI_REG_CLASSREV 0x0108 #define PCI_REG_PARAM 0x010C #define PCI_REG_MBAR 0x0110 #define PCI_REG_TIMEOUT 0x0140 /* PCI controller block register bits */ #define PCI_CMEM_E (1 << 28) /* enable cacheable memory */ #define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14) #define PCI_CMEM_CMMASK(x) ((x) & 0x3fff) #define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */ #define PCI_CONFIG_ET (1 << 26) /* error in target mode */ #define PCI_CONFIG_EF (1 << 25) /* fatal error */ #define PCI_CONFIG_EP (1 << 24) /* parity error */ #define PCI_CONFIG_EM (1 << 23) /* multiple errors */ #define PCI_CONFIG_BM (1 << 22) /* bad master error */ #define PCI_CONFIG_PD (1 << 20) /* PCI Disable */ #define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */ #define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */ #define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */ #define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */ #define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */ #define PCI_CONFIG_IMM (1 << 11) /* int on master abort */ #define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */ #define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */ #define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */ #define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */ #define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */ #define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */ #define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */ #define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */ #define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */ #define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */ #define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */ #define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */ #define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */ #define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16) #define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */ #define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16) #define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff) #define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16) #define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff) #define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16) #define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff) #define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16) #define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8) #define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff) #define PCI_ID_DID(x) (((x) & 0xffff) << 16) #define PCI_ID_VID(x) ((x) & 0xffff) #define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16) #define PCI_STATCMD_CMD(x) ((x) & 0xffff) #define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8) #define PCI_CLASSREV_REV(x) ((x) & 0xff) #define PCI_PARAM_BIST(x) (((x) & 0xff) << 24) #define PCI_PARAM_HT(x) (((x) & 0xff) << 16) #define PCI_PARAM_LT(x) (((x) & 0xff) << 8) #define PCI_PARAM_CLS(x) ((x) & 0xff) #define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */ #define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */ #endif