/* * PowerPC version * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP * Copyright (C) 1996 Cort Dougan * Adapted for Power Macintosh by Paul Mackerras. * Low-level exception handlers and MMU support * rewritten by Paul Mackerras. * Copyright (C) 1996 Paul Mackerras. * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). * * This file contains the system call entry code, context switch * code, and exception/interrupt return code for PowerPC. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include /* * System calls. */ .section ".toc","aw" .SYS_CALL_TABLE: .tc .sys_call_table[TC],.sys_call_table /* This value is used to mark exception frames on the stack. */ exception_marker: .tc ID_72656773_68657265[TC],0x7265677368657265 .section ".text" .align 7 #undef SHOW_SYSCALLS .globl system_call_common system_call_common: andi. r10,r12,MSR_PR mr r10,r1 addi r1,r1,-INT_FRAME_SIZE beq- 1f ld r1,PACAKSAVE(r13) 1: std r10,0(r1) crclr so std r11,_NIP(r1) std r12,_MSR(r1) std r0,GPR0(r1) std r10,GPR1(r1) ACCOUNT_CPU_USER_ENTRY(r10, r11) std r2,GPR2(r1) std r3,GPR3(r1) std r4,GPR4(r1) std r5,GPR5(r1) std r6,GPR6(r1) std r7,GPR7(r1) std r8,GPR8(r1) li r11,0 std r11,GPR9(r1) std r11,GPR10(r1) std r11,GPR11(r1) std r11,GPR12(r1) std r9,GPR13(r1) mfcr r9 mflr r10 li r11,0xc01 std r9,_CCR(r1) std r10,_LINK(r1) std r11,_TRAP(r1) mfxer r9 mfctr r10 std r9,_XER(r1) std r10,_CTR(r1) std r3,ORIG_GPR3(r1) ld r2,PACATOC(r13) addi r9,r1,STACK_FRAME_OVERHEAD ld r11,exception_marker@toc(r2) std r11,-16(r9) /* "regshere" marker */ li r10,1 stb r10,PACASOFTIRQEN(r13) stb r10,PACAHARDIRQEN(r13) std r10,SOFTE(r1) #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION /* Hack for handling interrupts when soft-enabling on iSeries */ cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ andi. r10,r12,MSR_PR /* from kernel */ crand 4*cr0+eq,4*cr1+eq,4*cr0+eq bne 2f b hardware_interrupt_entry 2: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif mfmsr r11 ori r11,r11,MSR_EE mtmsrd r11,1 #ifdef SHOW_SYSCALLS bl .do_show_syscall REST_GPR(0,r1) REST_4GPRS(3,r1) REST_2GPRS(7,r1) addi r9,r1,STACK_FRAME_OVERHEAD #endif clrrdi r11,r1,THREAD_SHIFT ld r10,TI_FLAGS(r11) andi. r11,r10,_TIF_SYSCALL_T_OR_A bne- syscall_dotrace syscall_dotrace_cont: cmpldi 0,r0,NR_syscalls bge- syscall_enosys system_call: /* label this so stack traces look sane */ /* * Need to vector to 32 Bit or default sys_call_table here, * based on caller's run-mode / personality. */ ld r11,.SYS_CALL_TABLE@toc(2) andi. r10,r10,_TIF_32BIT beq 15f addi r11,r11,8 /* use 32-bit syscall entries */ clrldi r3,r3,32 clrldi r4,r4,32 clrldi r5,r5,32 clrldi r6,r6,32 clrldi r7,r7,32 clrldi r8,r8,32 15: slwi r0,r0,4 ldx r10,r11,r0 /* Fetch system call handler [ptr] */ mtctr r10 bctrl /* Call handler */ syscall_exit: std r3,RESULT(r1) #ifdef SHOW_SYSCALLS bl .do_show_syscall_exit ld r3,RESULT(r1) #endif clrrdi r12,r1,THREAD_SHIFT /* disable interrupts so current_thread_info()->flags can't change, and so that we don't get interrupted after loading SRR0/1. */ ld r8,_MSR(r1) andi. r10,r8,MSR_RI beq- unrecov_restore mfmsr r10 rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 ld r9,TI_FLAGS(r12) li r11,-_LAST_ERRNO andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) bne- syscall_exit_work cmpld r3,r11 ld r5,_CCR(r1) bge- syscall_error syscall_error_cont: ld r7,_NIP(r1) stdcx. r0,0,r1 /* to clear the reservation */ andi. r6,r8,MSR_PR ld r4,_LINK(r1) /* * Clear RI before restoring r13. If we are returning to * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ li r12,MSR_RI andc r11,r10,r12 mtmsrd r11,1 /* clear MSR.RI */ beq- 1f ACCOUNT_CPU_USER_EXIT(r11, r12) ld r13,GPR13(r1) /* only restore r13 if returning to usermode */ 1: ld r2,GPR2(r1) ld r1,GPR1(r1) mtlr r4 mtcr r5 mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r8 rfid b . /* prevent speculative execution */ syscall_error: oris r5,r5,0x1000 /* Set SO bit in CR */ neg r3,r3 std r5,_CCR(r1) b syscall_error_cont /* Traced system call support */ syscall_dotrace: bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl .do_syscall_trace_enter ld r0,GPR0(r1) /* Restore original registers */ ld r3,GPR3(r1) ld r4,GPR4(r1) ld r5,GPR5(r1) ld r6,GPR6(r1) ld r7,GPR7(r1) ld r8,GPR8(r1) addi r9,r1,STACK_FRAME_OVERHEAD clrrdi r10,r1,THREAD_SHIFT ld r10,TI_FLAGS(r10) b syscall_dotrace_cont syscall_enosys: li r3,-ENOSYS b syscall_exit syscall_exit_work: /* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr. If TIF_NOERROR is set, just save r3 as it is. */ andi. r0,r9,_TIF_RESTOREALL beq+ 0f REST_NVGPRS(r1) b 2f 0: cmpld r3,r11 /* r10 is -LAST_ERRNO */ blt+ 1f andi. r0,r9,_TIF_NOERROR bne- 1f ld r5,_CCR(r1) neg r3,r3 oris r5,r5,0x1000 /* Set SO bit in CR */ std r5,_CCR(r1) 1: std r3,GPR3(r1) 2: andi. r0,r9,(_TIF_PERSYSCALL_MASK) beq 4f /* Clear per-syscall TIF flags if any are set. */ li r11,_TIF_PERSYSCALL_MASK addi r12,r12,TI_FLAGS 3: ldarx r10,0,r12 andc r10,r10,r11 stdcx. r10,0,r12 bne- 3b subi r12,r12,TI_FLAGS 4: /* Anything else left to do? */ andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) beq .ret_from_except_lite /* Re-enable interrupts */ mfmsr r10 ori r10,r10,MSR_EE mtmsrd r10,1 bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl .do_syscall_trace_leave b .ret_from_except /* Save non-volatile GPRs, if not already saved. */ _GLOBAL(save_nvgprs) ld r11,_TRAP(r1) andi. r0,r11,1 beqlr- SAVE_NVGPRS(r1) clrrdi r0,r11,1 std r0,_TRAP(r1) blr /* * The sigsuspend and rt_sigsuspend system calls can call do_signal * and thus put the process into the stopped state where we might * want to examine its user state with ptrace. Therefore we need * to save all the nonvolatile registers (r14 - r31) before calling * the C code. Similarly, fork, vfork and clone need the full * register state on the stack so that it can be copied to the child. */ _GLOBAL(ppc_fork) bl .save_nvgprs bl .sys_fork b syscall_exit _GLOBAL(ppc_vfork) bl .save_nvgprs bl .sys_vfork b syscall_exit _GLOBAL(ppc_clone) bl .save_nvgprs bl .sys_clone b syscall_exit _GLOBAL(ppc32_swapcontext) bl .save_nvgprs bl .compat_sys_swapcontext b syscall_exit _GLOBAL(ppc64_swapcontext) bl .save_nvgprs bl .sys_swapcontext b syscall_exit _GLOBAL(ret_from_fork) bl .schedule_tail REST_NVGPRS(r1) li r3,0 b syscall_exit /* * This routine switches between two different tasks. The process * state of one is saved on its kernel stack. Then the state * of the other is restored from its kernel stack. The memory * management hardware is updated to the second process's state. * Finally, we can return to the second process, via ret_from_except. * On entry, r3 points to the THREAD for the current task, r4 * points to the THREAD for the new task. * * Note: there are two ways to get to the "going out" portion * of this code; either by coming in via the entry (_switch) * or via "fork" which must set up an environment equivalent * to the "_switch" path. If you change this you'll have to change * the fork code also. * * The code which creates the new task context is in 'copy_thread' * in arch/powerpc/kernel/process.c */ .align 7 _GLOBAL(_switch) mflr r0 std r0,16(r1) stdu r1,-SWITCH_FRAME_SIZE(r1) /* r3-r13 are caller saved -- Cort */ SAVE_8GPRS(14, r1) SAVE_10GPRS(22, r1) mflr r20 /* Return to switch caller */ mfmsr r22 li r0, MSR_FP #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION oris r0,r0,MSR_VEC@h /* Disable altivec */ mfspr r24,SPRN_VRSAVE /* save vrsave register value */ std r24,THREAD_VRSAVE(r3) END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ and. r0,r0,r22 beq+ 1f andc r22,r22,r0 mtmsrd r22 isync 1: std r20,_NIP(r1) mfcr r23 std r23,_CCR(r1) std r1,KSP(r3) /* Set old stack pointer */ #ifdef CONFIG_SMP /* We need a sync somewhere here to make sure that if the * previous task gets rescheduled on another CPU, it sees all * stores it has performed on this one. */ sync #endif /* CONFIG_SMP */ addi r6,r4,-THREAD /* Convert THREAD to 'current' */ std r6,PACACURRENT(r13) /* Set new 'current' */ ld r8,KSP(r4) /* new stack pointer */ BEGIN_FTR_SECTION b 2f END_FTR_SECTION_IFCLR(CPU_FTR_SLB) BEGIN_FTR_SECTION clrrdi r6,r8,28 /* get its ESID */ clrrdi r9,r1,28 /* get current sp ESID */ END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT) BEGIN_FTR_SECTION clrrdi r6,r8,40 /* get its 1T ESID */ clrrdi r9,r1,40 /* get current sp 1T ESID */ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) clrldi. r0,r6,2 /* is new ESID c00000000? */ cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ cror eq,4*cr1+eq,eq beq 2f /* if yes, don't slbie it */ /* Bolt in the new stack SLB entry */ ld r7,KSP_VSID(r4) /* Get new stack's VSID */ oris r0,r6,(SLB_ESID_V)@h ori r0,r0,(SLB_NUM_BOLTED-1)@l BEGIN_FTR_SECTION li r9,MMU_SEGSIZE_1T /* insert B field */ oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0 END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) /* Update the last bolted SLB. No write barriers are needed * here, provided we only update the current CPU's SLB shadow * buffer. */ ld r9,PACA_SLBSHADOWPTR(r13) li r12,0 std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */ std r7,SLBSHADOW_STACKVSID(r9) /* Save VSID */ std r0,SLBSHADOW_STACKESID(r9) /* Save ESID */ /* No need to check for CPU_FTR_NO_SLBIE_B here, since when * we have 1TB segments, the only CPUs known to have the errata * only support less than 1TB of system memory and we'll never * actually hit this code path. */ slbie r6 slbie r6 /* Workaround POWER5 < DD2.1 issue */ slbmte r7,r0 isync 2: clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE because we don't need to leave the 288-byte ABI gap at the top of the kernel stack. */ addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) ld r6,_CCR(r1) mtcrf 0xFF,r6 #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION ld r0,THREAD_VRSAVE(r4) mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ /* r3-r13 are destroyed -- Cort */ REST_8GPRS(14, r1) REST_10GPRS(22, r1) /* convert old thread to its task_struct for return value */ addi r3,r3,-THREAD ld r7,_NIP(r1) /* Return to _switch caller in new task */ mtlr r7 addi r1,r1,SWITCH_FRAME_SIZE blr .align 7 _GLOBAL(ret_from_except) ld r11,_TRAP(r1) andi. r0,r11,1 bne .ret_from_except_lite REST_NVGPRS(r1) _GLOBAL(ret_from_except_lite) /* * Disable interrupts so that current_thread_info()->flags * can't change between when we test it and when we return * from the interrupt. */ mfmsr r10 /* Get current interrupt state */ rldicl r9,r10,48,1 /* clear MSR_EE */ rotldi r9,r9,16 mtmsrd r9,1 /* Update machine state */ #ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ li r0,_TIF_NEED_RESCHED /* bits to check */ ld r3,_MSR(r1) ld r4,TI_FLAGS(r9) /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ bne do_work #else /* !CONFIG_PREEMPT */ ld r3,_MSR(r1) /* Returning to user mode? */ andi. r3,r3,MSR_PR beq restore /* if not, just restore regs and return */ /* Check current_thread_info()->flags */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_USER_WORK_MASK bne do_work #endif restore: ld r5,SOFTE(r1) #ifdef CONFIG_PPC_ISERIES BEGIN_FW_FTR_SECTION cmpdi 0,r5,0 beq 4f /* Check for pending interrupts (iSeries) */ ld r3,PACALPPACAPTR(r13) ld r3,LPPACAANYINT(r3) cmpdi r3,0 beq+ 4f /* skip do_IRQ if no interrupts */ li r3,0 stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ ori r10,r10,MSR_EE mtmsrd r10 /* hard-enable again */ addi r3,r1,STACK_FRAME_OVERHEAD bl .do_IRQ b .ret_from_except_lite /* loop back and handle more */ 4: END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) #endif stb r5,PACASOFTIRQEN(r13) /* extract EE bit and use it to restore paca->hard_enabled */ ld r3,_MSR(r1) rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ stb r4,PACAHARDIRQEN(r13) ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 mtlr r0 ld r4,_XER(r1) mtspr SPRN_XER,r4 REST_8GPRS(5, r1) andi. r0,r3,MSR_RI beq- unrecov_restore stdcx. r0,0,r1 /* to clear the reservation */ /* * Clear RI before restoring r13. If we are returning to * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ mfmsr r4 andc r4,r4,r0 /* r0 contains MSR_RI here */ mtmsrd r4,1 /* * r13 is our per cpu area, only restore it if we are returning to * userspace */ andi. r0,r3,MSR_PR beq 1f ACCOUNT_CPU_USER_EXIT(r2, r4) REST_GPR(13, r1) 1: mtspr SPRN_SRR1,r3 ld r2,_CCR(r1) mtcrf 0xFF,r2 ld r2,_NIP(r1) mtspr SPRN_SRR0,r2 ld r0,GPR0(r1) ld r2,GPR2(r1) ld r3,GPR3(r1) ld r4,GPR4(r1) ld r1,GPR1(r1) rfid b . /* prevent speculative execution */ do_work: #ifdef CONFIG_PREEMPT andi. r0,r3,MSR_PR /* Returning to user mode? */ bne user_work /* Check that preempt_count() == 0 and interrupts are enabled */ lwz r8,TI_PREEMPT(r9) cmpwi cr1,r8,0 ld r0,SOFTE(r1) cmpdi r0,0 crandc eq,cr1*4+eq,eq bne restore /* here we are preempting the current task */ 1: li r0,1 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) ori r10,r10,MSR_EE mtmsrd r10,1 /* reenable interrupts */ bl .preempt_schedule mfmsr r10 clrrdi r9,r1,THREAD_SHIFT rldicl r10,r10,48,1 /* disable interrupts again */ rotldi r10,r10,16 mtmsrd r10,1 ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b b restore user_work: #endif /* Enable interrupts */ ori r10,r10,MSR_EE mtmsrd r10,1 andi. r0,r4,_TIF_NEED_RESCHED beq 1f bl .schedule b .ret_from_except_lite 1: bl .save_nvgprs li r3,0 addi r4,r1,STACK_FRAME_OVERHEAD bl .do_signal b .ret_from_except unrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD bl .unrecoverable_exception b unrecov_restore #ifdef CONFIG_PPC_RTAS /* * On CHRP, the Run-Time Abstraction Services (RTAS) have to be * called with the MMU off. * * In addition, we need to be in 32b mode, at least for now. * * Note: r3 is an input parameter to rtas, so don't trash it... */ _GLOBAL(enter_rtas) mflr r0 std r0,16(r1) stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */ /* Because RTAS is running in 32b mode, it clobbers the high order half * of all registers that it saves. We therefore save those registers * RTAS might touch to the stack. (r0, r3-r13 are caller saved) */ SAVE_GPR(2, r1) /* Save the TOC */ SAVE_GPR(13, r1) /* Save paca */ SAVE_8GPRS(14, r1) /* Save the non-volatiles */ SAVE_10GPRS(22, r1) /* ditto */ mfcr r4 std r4,_CCR(r1) mfctr r5 std r5,_CTR(r1) mfspr r6,SPRN_XER std r6,_XER(r1) mfdar r7 std r7,_DAR(r1) mfdsisr r8 std r8,_DSISR(r1) mfsrr0 r9 std r9,_SRR0(r1) mfsrr1 r10 std r10,_SRR1(r1) /* Temporary workaround to clear CR until RTAS can be modified to * ignore all bits. */ li r0,0 mtcr r0 #ifdef CONFIG_BUG /* There is no way it is acceptable to get here with interrupts enabled, * check it with the asm equivalent of WARN_ON */ lbz r0,PACASOFTIRQEN(r13) 1: tdnei r0,0 EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING #endif /* Hard-disable interrupts */ mfmsr r6 rldicl r7,r6,48,1 rotldi r7,r7,16 mtmsrd r7,1 /* Unfortunately, the stack pointer and the MSR are also clobbered, * so they are saved in the PACA which allows us to restore * our original state after RTAS returns. */ std r1,PACAR1(r13) std r6,PACASAVEDMSR(r13) /* Setup our real return addr */ LOAD_REG_ADDR(r4,.rtas_return_loc) clrldi r4,r4,2 /* convert to realmode address */ mtlr r4 li r0,0 ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI andc r0,r6,r0 li r9,1 rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP andc r6,r0,r9 ori r6,r6,MSR_RI sync /* disable interrupts so SRR0/1 */ mtmsrd r0 /* don't get trashed */ LOAD_REG_ADDR(r4, rtas) ld r5,RTASENTRY(r4) /* get the rtas->entry value */ ld r4,RTASBASE(r4) /* get the rtas->base value */ mtspr SPRN_SRR0,r5 mtspr SPRN_SRR1,r6 rfid b . /* prevent speculative execution */ _STATIC(rtas_return_loc) /* relocation is off at this point */ mfspr r4,SPRN_SPRG3 /* Get PACA */ clrldi r4,r4,2 /* convert to realmode address */ mfmsr r6 li r0,MSR_RI andc r6,r6,r0 sync mtmsrd r6 ld r1,PACAR1(r4) /* Restore our SP */ LOAD_REG_IMMEDIATE(r3,.rtas_restore_regs) ld r4,PACASAVEDMSR(r4) /* Restore our MSR */ mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 rfid b . /* prevent speculative execution */ _STATIC(rtas_restore_regs) /* relocation is on at this point */ REST_GPR(2, r1) /* Restore the TOC */ REST_GPR(13, r1) /* Restore paca */ REST_8GPRS(14, r1) /* Restore the non-volatiles */ REST_10GPRS(22, r1) /* ditto */ mfspr r13,SPRN_SPRG3 ld r4,_CCR(r1) mtcr r4 ld r5,_CTR(r1) mtctr r5 ld r6,_XER(r1) mtspr SPRN_XER,r6 ld r7,_DAR(r1) mtdar r7 ld r8,_DSISR(r1) mtdsisr r8 ld r9,_SRR0(r1) mtsrr0 r9 ld r10,_SRR1(r1) mtsrr1 r10 addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */ ld r0,16(r1) /* get return address */ mtlr r0 blr /* return to caller */ #endif /* CONFIG_PPC_RTAS */ _GLOBAL(enter_prom) mflr r0 std r0,16(r1) stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ /* Because PROM is running in 32b mode, it clobbers the high order half * of all registers that it saves. We therefore save those registers * PROM might touch to the stack. (r0, r3-r13 are caller saved) */ SAVE_8GPRS(2, r1) SAVE_GPR(13, r1) SAVE_8GPRS(14, r1) SAVE_10GPRS(22, r1) mfcr r4 std r4,_CCR(r1) mfctr r5 std r5,_CTR(r1) mfspr r6,SPRN_XER std r6,_XER(r1) mfdar r7 std r7,_DAR(r1) mfdsisr r8 std r8,_DSISR(r1) mfsrr0 r9 std r9,_SRR0(r1) mfsrr1 r10 std r10,_SRR1(r1) mfmsr r11 std r11,_MSR(r1) /* Get the PROM entrypoint */ ld r0,GPR4(r1) mtlr r0 /* Switch MSR to 32 bits mode */ mfmsr r11 li r12,1 rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) andc r11,r11,r12 li r12,1 rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) andc r11,r11,r12 mtmsrd r11 isync /* Restore arguments & enter PROM here... */ ld r3,GPR3(r1) blrl /* Just make sure that r1 top 32 bits didn't get * corrupt by OF */ rldicl r1,r1,0,32 /* Restore the MSR (back to 64 bits) */ ld r0,_MSR(r1) mtmsrd r0 isync /* Restore other registers */ REST_GPR(2, r1) REST_GPR(13, r1) REST_8GPRS(14, r1) REST_10GPRS(22, r1) ld r4,_CCR(r1) mtcr r4 ld r5,_CTR(r1) mtctr r5 ld r6,_XER(r1) mtspr SPRN_XER,r6 ld r7,_DAR(r1) mtdar r7 ld r8,_DSISR(r1) mtdsisr r8 ld r9,_SRR0(r1) mtsrr0 r9 ld r10,_SRR1(r1) mtsrr1 r10 addi r1,r1,PROM_FRAME_SIZE ld r0,16(r1) mtlr r0 blr