// SPDX-License-Identifier: GPL-2.0-or-later /* * mpc7448_hpc2.c * * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com * Author: Xianghua Xiao * x.xiao@freescale.com * Maintainer: Roy Zang * Add Flat Device Tree support fot mpc7448hpc2 board * * Copyright 2004-2006 Freescale Semiconductor, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #undef DEBUG #ifdef DEBUG #define DBG(fmt...) do { printk(fmt); } while(0) #else #define DBG(fmt...) do { } while(0) #endif #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000 int mpc7448_hpc2_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } static void __init mpc7448_hpc2_setup_arch(void) { struct device_node *np; if (ppc_md.progress) ppc_md.progress("mpc7448_hpc2_setup_arch():set_bridge", 0); tsi108_csr_vir_base = get_vir_csrbase(); /* setup PCI host bridge */ #ifdef CONFIG_PCI for_each_compatible_node(np, "pci", "tsi108-pci") tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0); ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device; if (ppc_md.progress) ppc_md.progress("tsi108: resources set", 0x100); #endif printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n"); printk(KERN_INFO "Jointly ported by Freescale and Tundra Semiconductor\n"); printk(KERN_INFO "Enabling L2 cache then enabling the HID0 prefetch engine.\n"); } /* * Interrupt setup and service. Interrupts on the mpc7448_hpc2 come * from the four external INT pins, PCI interrupts are routed via * PCI interrupt control registers, it generates internal IRQ23 * * Interrupt routing on the Taiga Board: * TSI108:PB_INT[0] -> CPU0:INT# * TSI108:PB_INT[1] -> CPU0:MCP# * TSI108:PB_INT[2] -> N/C * TSI108:PB_INT[3] -> N/C */ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; #ifdef CONFIG_PCI unsigned int cascade_pci_irq; struct device_node *tsi_pci; struct device_node *cascade_node = NULL; #endif mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, 24, 0, "Tsi108_PIC"); BUG_ON(mpic == NULL); mpic_assign_isu(mpic, 0, mpic->paddr + 0x100); mpic_init(mpic); #ifdef CONFIG_PCI tsi_pci = of_find_node_by_type(NULL, "pci"); if (tsi_pci == NULL) { printk("%s: No tsi108 pci node found !\n", __func__); return; } cascade_node = of_find_node_by_type(NULL, "pic-router"); if (cascade_node == NULL) { printk("%s: No tsi108 pci cascade node found !\n", __func__); return; } cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq); tsi108_pci_int_init(cascade_node); irq_set_handler_data(cascade_pci_irq, mpic); irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade); #endif /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) { seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); } static void __noreturn mpc7448_hpc2_restart(char *cmd) { local_irq_disable(); /* Set exception prefix high - to the firmware */ _nmask_and_or_msr(0, MSR_IP); for (;;) ; /* Spin until reset happens */ } /* * Called very early, device-tree isn't unflattened */ static int __init mpc7448_hpc2_probe(void) { if (!of_machine_is_compatible("mpc74xx")) return 0; return 1; } static int mpc7448_machine_check_exception(struct pt_regs *regs) { const struct exception_table_entry *entry; /* Are we prepared to handle this fault */ if ((entry = search_exception_tables(regs->nip)) != NULL) { tsi108_clear_pci_cfg_error(); regs->msr |= MSR_RI; regs->nip = extable_fixup(entry); return 1; } return 0; } define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, .setup_arch = mpc7448_hpc2_setup_arch, .init_IRQ = mpc7448_hpc2_init_IRQ, .show_cpuinfo = mpc7448_hpc2_show_cpuinfo, .get_irq = mpic_get_irq, .restart = mpc7448_hpc2_restart, .calibrate_decr = generic_calibrate_decr, .machine_check_exception= mpc7448_machine_check_exception, .progress = udbg_progress, };