/* * Board and PCI setup routines for IBM Spruce * * Author: MontaVista Software * * 2000-2004 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "spruce.h" static inline int spruce_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { static char pci_irq_table[][4] = /* * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {23, 24, 25, 26}, /* IDSEL 1 - PCI slot 3 */ {24, 25, 26, 23}, /* IDSEL 2 - PCI slot 2 */ {25, 26, 23, 24}, /* IDSEL 3 - PCI slot 1 */ {26, 23, 24, 25}, /* IDSEL 4 - PCI slot 0 */ }; const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } static void __init spruce_setup_hose(void) { struct pci_controller *hose; /* Setup hose */ hose = pcibios_alloc_controller(); if (!hose) return; hose->first_busno = 0; hose->last_busno = 0xff; pci_init_resource(&hose->io_resource, SPRUCE_PCI_LOWER_IO, SPRUCE_PCI_UPPER_IO, IORESOURCE_IO, "PCI host bridge"); pci_init_resource(&hose->mem_resources[0], SPRUCE_PCI_LOWER_MEM, SPRUCE_PCI_UPPER_MEM, IORESOURCE_MEM, "PCI host bridge"); hose->io_space.start = SPRUCE_PCI_LOWER_IO; hose->io_space.end = SPRUCE_PCI_UPPER_IO; hose->mem_space.start = SPRUCE_PCI_LOWER_MEM; hose->mem_space.end = SPRUCE_PCI_UPPER_MEM; hose->io_base_virt = (void *)SPRUCE_ISA_IO_BASE; setup_indirect_pci(hose, SPRUCE_PCI_CONFIG_ADDR, SPRUCE_PCI_CONFIG_DATA); hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); ppc_md.pci_swizzle = common_swizzle; ppc_md.pci_map_irq = spruce_map_irq; } /* * CPC700 PIC interrupt programming table * * First entry is the sensitivity (level/edge), second is the polarity. */ unsigned int cpc700_irq_assigns[32][2] = { { 1, 1 }, /* IRQ 0: ECC Correctable Error - rising edge */ { 1, 1 }, /* IRQ 1: PCI Write Mem Range - rising edge */ { 0, 1 }, /* IRQ 2: PCI Write Command Reg - active high */ { 0, 1 }, /* IRQ 3: UART 0 - active high */ { 0, 1 }, /* IRQ 4: UART 1 - active high */ { 0, 1 }, /* IRQ 5: ICC 0 - active high */ { 0, 1 }, /* IRQ 6: ICC 1 - active high */ { 0, 1 }, /* IRQ 7: GPT Compare 0 - active high */ { 0, 1 }, /* IRQ 8: GPT Compare 1 - active high */ { 0, 1 }, /* IRQ 9: GPT Compare 2 - active high */ { 0, 1 }, /* IRQ 10: GPT Compare 3 - active high */ { 0, 1 }, /* IRQ 11: GPT Compare 4 - active high */ { 0, 1 }, /* IRQ 12: GPT Capture 0 - active high */ { 0, 1 }, /* IRQ 13: GPT Capture 1 - active high */ { 0, 1 }, /* IRQ 14: GPT Capture 2 - active high */ { 0, 1 }, /* IRQ 15: GPT Capture 3 - active high */ { 0, 1 }, /* IRQ 16: GPT Capture 4 - active high */ { 0, 0 }, /* IRQ 17: Reserved */ { 0, 0 }, /* IRQ 18: Reserved */ { 0, 0 }, /* IRQ 19: Reserved */ { 0, 1 }, /* IRQ 20: FPGA EXT_IRQ0 - active high */ { 1, 1 }, /* IRQ 21: Mouse - rising edge */ { 1, 1 }, /* IRQ 22: Keyboard - rising edge */ { 0, 0 }, /* IRQ 23: PCI Slot 3 - active low */ { 0, 0 }, /* IRQ 24: PCI Slot 2 - active low */ { 0, 0 }, /* IRQ 25: PCI Slot 1 - active low */ { 0, 0 }, /* IRQ 26: PCI Slot 0 - active low */ }; static void __init spruce_calibrate_decr(void) { int freq, divisor = 4; /* determine processor bus speed */ freq = SPRUCE_BUS_SPEED; tb_ticks_per_jiffy = freq / HZ / divisor; tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000); } static int spruce_show_cpuinfo(struct seq_file *m) { seq_printf(m, "vendor\t\t: IBM\n"); seq_printf(m, "machine\t\t: Spruce\n"); return 0; } static void __init spruce_early_serial_map(void) { u32 uart_clk; struct uart_port serial_req; if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A))) uart_clk = SPRUCE_BAUD_33M * 16; else uart_clk = SPRUCE_BAUD_30M * 16; /* Setup serial port access */ memset(&serial_req, 0, sizeof(serial_req)); serial_req.uartclk = uart_clk; serial_req.irq = UART0_INT; serial_req.flags = UPF_BOOT_AUTOCONF; serial_req.iotype = UPIO_MEM; serial_req.membase = (u_char *)UART0_IO_BASE; serial_req.regshift = 0; #if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG) gen550_init(0, &serial_req); #endif #ifdef CONFIG_SERIAL_8250 if (early_serial_setup(&serial_req) != 0) printk("Early serial init of port 0 failed\n"); #endif /* Assume early_serial_setup() doesn't modify serial_req */ serial_req.line = 1; serial_req.irq = UART1_INT; serial_req.membase = (u_char *)UART1_IO_BASE; #if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG) gen550_init(1, &serial_req); #endif #ifdef CONFIG_SERIAL_8250 if (early_serial_setup(&serial_req) != 0) printk("Early serial init of port 1 failed\n"); #endif } TODC_ALLOC(); static void __init spruce_setup_arch(void) { /* Setup TODC access */ TODC_INIT(TODC_TYPE_DS1643, 0, 0, SPRUCE_RTC_BASE_ADDR, 8); /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000 / HZ; /* Setup PCI host bridge */ spruce_setup_hose(); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else #endif #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else ROOT_DEV = Root_SDA1; #endif /* Identify the system */ printk(KERN_INFO "System Identification: IBM Spruce\n"); printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); } static void spruce_restart(char *cmd) { local_irq_disable(); /* SRR0 has system reset vector, SRR1 has default MSR value */ /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ __asm__ __volatile__ ("\n\ lis 3,0xfff0 \n\ ori 3,3,0x0100 \n\ mtspr 26,3 \n\ li 3,0 \n\ mtspr 27,3 \n\ rfi \n\ "); for(;;); } static void spruce_power_off(void) { for(;;); } static void spruce_halt(void) { spruce_restart(NULL); } static void __init spruce_map_io(void) { io_block_mapping(SPRUCE_PCI_IO_BASE, SPRUCE_PCI_PHY_IO_BASE, 0x08000000, _PAGE_IO); } /* * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1. */ static __inline__ void spruce_set_bat(void) { mb(); mtspr(SPRN_DBAT1U, 0xf8000ffe); mtspr(SPRN_DBAT1L, 0xf800002a); mb(); } void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { parse_bootinfo(find_bootinfo()); /* Map in board regs, etc. */ spruce_set_bat(); isa_io_base = SPRUCE_ISA_IO_BASE; pci_dram_offset = SPRUCE_PCI_SYS_MEM_BASE; ppc_md.setup_arch = spruce_setup_arch; ppc_md.show_cpuinfo = spruce_show_cpuinfo; ppc_md.init_IRQ = cpc700_init_IRQ; ppc_md.get_irq = cpc700_get_irq; ppc_md.setup_io_mappings = spruce_map_io; ppc_md.restart = spruce_restart; ppc_md.power_off = spruce_power_off; ppc_md.halt = spruce_halt; ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.calibrate_decr = spruce_calibrate_decr; ppc_md.nvram_read_val = todc_direct_read_val; ppc_md.nvram_write_val = todc_direct_write_val; spruce_early_serial_map(); #ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_TEXT_DEBUG */ #ifdef CONFIG_KGDB ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; #endif }