/* * AHCI SATA platform library * * Copyright 2004-2005 Red Hat, Inc. * Jeff Garzik * Copyright 2010 MontaVista Software, LLC. * Anton Vorontsov * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "ahci.h" static void ahci_host_stop(struct ata_host *host); struct ata_port_operations ahci_platform_ops = { .inherits = &ahci_ops, .host_stop = ahci_host_stop, }; EXPORT_SYMBOL_GPL(ahci_platform_ops); static struct scsi_host_template ahci_platform_sht = { AHCI_SHT("ahci_platform"), }; /** * ahci_platform_enable_clks - Enable platform clocks * @hpriv: host private area to store config values * * This function enables all the clks found in hpriv->clks, starting at * index 0. If any clk fails to enable it disables all the clks already * enabled in reverse order, and then returns an error. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_enable_clks(struct ahci_host_priv *hpriv) { int c, rc; for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) { rc = clk_prepare_enable(hpriv->clks[c]); if (rc) goto disable_unprepare_clk; } return 0; disable_unprepare_clk: while (--c >= 0) clk_disable_unprepare(hpriv->clks[c]); return rc; } EXPORT_SYMBOL_GPL(ahci_platform_enable_clks); /** * ahci_platform_disable_clks - Disable platform clocks * @hpriv: host private area to store config values * * This function disables all the clks found in hpriv->clks, in reverse * order of ahci_platform_enable_clks (starting at the end of the array). */ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv) { int c; for (c = AHCI_MAX_CLKS - 1; c >= 0; c--) if (hpriv->clks[c]) clk_disable_unprepare(hpriv->clks[c]); } EXPORT_SYMBOL_GPL(ahci_platform_disable_clks); /** * ahci_platform_enable_resources - Enable platform resources * @hpriv: host private area to store config values * * This function enables all ahci_platform managed resources in the * following order: * 1) Regulator * 2) Clocks (through ahci_platform_enable_clks) * 3) Phy * * If resource enabling fails at any point the previous enabled resources * are disabled in reverse order. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv) { int rc; if (hpriv->target_pwr) { rc = regulator_enable(hpriv->target_pwr); if (rc) return rc; } rc = ahci_platform_enable_clks(hpriv); if (rc) goto disable_regulator; if (hpriv->phy) { rc = phy_init(hpriv->phy); if (rc) goto disable_clks; rc = phy_power_on(hpriv->phy); if (rc) { phy_exit(hpriv->phy); goto disable_clks; } } return 0; disable_clks: ahci_platform_disable_clks(hpriv); disable_regulator: if (hpriv->target_pwr) regulator_disable(hpriv->target_pwr); return rc; } EXPORT_SYMBOL_GPL(ahci_platform_enable_resources); /** * ahci_platform_disable_resources - Disable platform resources * @hpriv: host private area to store config values * * This function disables all ahci_platform managed resources in the * following order: * 1) Phy * 2) Clocks (through ahci_platform_disable_clks) * 3) Regulator */ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv) { if (hpriv->phy) { phy_power_off(hpriv->phy); phy_exit(hpriv->phy); } ahci_platform_disable_clks(hpriv); if (hpriv->target_pwr) regulator_disable(hpriv->target_pwr); } EXPORT_SYMBOL_GPL(ahci_platform_disable_resources); static void ahci_platform_put_resources(struct device *dev, void *res) { struct ahci_host_priv *hpriv = res; int c; if (hpriv->got_runtime_pm) { pm_runtime_put_sync(dev); pm_runtime_disable(dev); } for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) clk_put(hpriv->clks[c]); } /** * ahci_platform_get_resources - Get platform resources * @pdev: platform device to get resources for * * This function allocates an ahci_host_priv struct, and gets the following * resources, storing a reference to them inside the returned struct: * * 1) mmio registers (IORESOURCE_MEM 0, mandatory) * 2) regulator for controlling the targets power (optional) * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node, * or for non devicetree enabled platforms a single clock * 4) phy (optional) * * RETURNS: * The allocated ahci_host_priv on success, otherwise an ERR_PTR value */ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct clk *clk; int i, rc = -ENOMEM; if (!devres_open_group(dev, NULL, GFP_KERNEL)) return ERR_PTR(-ENOMEM); hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) goto err_out; devres_add(dev, hpriv); hpriv->mmio = devm_ioremap_resource(dev, platform_get_resource(pdev, IORESOURCE_MEM, 0)); if (IS_ERR(hpriv->mmio)) { dev_err(dev, "no mmio space\n"); rc = PTR_ERR(hpriv->mmio); goto err_out; } hpriv->target_pwr = devm_regulator_get_optional(dev, "target"); if (IS_ERR(hpriv->target_pwr)) { rc = PTR_ERR(hpriv->target_pwr); if (rc == -EPROBE_DEFER) goto err_out; hpriv->target_pwr = NULL; } for (i = 0; i < AHCI_MAX_CLKS; i++) { /* * For now we must use clk_get(dev, NULL) for the first clock, * because some platforms (da850, spear13xx) are not yet * converted to use devicetree for clocks. For new platforms * this is equivalent to of_clk_get(dev->of_node, 0). */ if (i == 0) clk = clk_get(dev, NULL); else clk = of_clk_get(dev->of_node, i); if (IS_ERR(clk)) { rc = PTR_ERR(clk); if (rc == -EPROBE_DEFER) goto err_out; break; } hpriv->clks[i] = clk; } hpriv->phy = devm_phy_get(dev, "sata-phy"); if (IS_ERR(hpriv->phy)) { rc = PTR_ERR(hpriv->phy); switch (rc) { case -ENODEV: case -ENOSYS: /* continue normally */ hpriv->phy = NULL; break; case -EPROBE_DEFER: goto err_out; default: dev_err(dev, "couldn't get sata-phy\n"); goto err_out; } } pm_runtime_enable(dev); pm_runtime_get_sync(dev); hpriv->got_runtime_pm = true; devres_remove_group(dev, NULL); return hpriv; err_out: devres_release_group(dev, NULL); return ERR_PTR(rc); } EXPORT_SYMBOL_GPL(ahci_platform_get_resources); /** * ahci_platform_init_host - Bring up an ahci-platform host * @pdev: platform device pointer for the host * @hpriv: ahci-host private data for the host * @pi_template: template for the ata_port_info to use * @force_port_map: param passed to ahci_save_initial_config * @mask_port_map: param passed to ahci_save_initial_config * * This function does all the usual steps needed to bring up an * ahci-platform host, note any necessary resources (ie clks, phy, etc.) * must be initialized / enabled before calling this. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_init_host(struct platform_device *pdev, struct ahci_host_priv *hpriv, const struct ata_port_info *pi_template, unsigned int force_port_map, unsigned int mask_port_map) { struct device *dev = &pdev->dev; struct ata_port_info pi = *pi_template; const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; int i, irq, n_ports, rc; irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(dev, "no irq\n"); return -EINVAL; } /* prepare host */ hpriv->flags |= (unsigned long)pi.private_data; ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map); if (hpriv->cap & HOST_CAP_NCQ) pi.flags |= ATA_FLAG_NCQ; if (hpriv->cap & HOST_CAP_PMP) pi.flags |= ATA_FLAG_PMP; ahci_set_em_messages(hpriv, &pi); /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at * both CAP.NP and port_map. */ n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); host = ata_host_alloc_pinfo(dev, ppi, n_ports); if (!host) return -ENOMEM; host->private_data = hpriv; if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else dev_info(dev, "SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; ata_port_desc(ap, "mmio %pR", platform_get_resource(pdev, IORESOURCE_MEM, 0)); ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80); /* set enclosure management message type */ if (ap->flags & ATA_FLAG_EM) ap->em_message_type = hpriv->em_msg_type; /* disabled/not-implemented port */ if (!(hpriv->port_map & (1 << i))) ap->ops = &ata_dummy_port_ops; } rc = ahci_reset_controller(host); if (rc) return rc; ahci_init_controller(host); ahci_print_info(host, "platform"); return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED, &ahci_platform_sht); } EXPORT_SYMBOL_GPL(ahci_platform_init_host); static void ahci_host_stop(struct ata_host *host) { struct device *dev = host->dev; struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ahci_host_priv *hpriv = host->private_data; if (pdata && pdata->exit) pdata->exit(dev); ahci_platform_disable_resources(hpriv); } #ifdef CONFIG_PM_SLEEP /** * ahci_platform_suspend_host - Suspend an ahci-platform host * @dev: device pointer for the host * * This function does all the usual steps needed to suspend an * ahci-platform host, note any necessary resources (ie clks, phy, etc.) * must be disabled after calling this. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_suspend_host(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->mmio; u32 ctl; if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { dev_err(dev, "firmware update required for suspend/resume\n"); return -EIO; } /* * AHCI spec rev1.1 section 8.3.3: * Software must disable interrupts prior to requesting a * transition of the HBA to D3 state. */ ctl = readl(mmio + HOST_CTL); ctl &= ~HOST_IRQ_EN; writel(ctl, mmio + HOST_CTL); readl(mmio + HOST_CTL); /* flush */ return ata_host_suspend(host, PMSG_SUSPEND); } EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); /** * ahci_platform_resume_host - Resume an ahci-platform host * @dev: device pointer for the host * * This function does all the usual steps needed to resume an ahci-platform * host, note any necessary resources (ie clks, phy, etc.) must be * initialized / enabled before calling this. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_resume_host(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); int rc; if (dev->power.power_state.event == PM_EVENT_SUSPEND) { rc = ahci_reset_controller(host); if (rc) return rc; ahci_init_controller(host); } ata_host_resume(host); return 0; } EXPORT_SYMBOL_GPL(ahci_platform_resume_host); /** * ahci_platform_suspend - Suspend an ahci-platform device * @dev: the platform device to suspend * * This function suspends the host associated with the device, followed by * disabling all the resources of the device. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_suspend(struct device *dev) { struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; int rc; rc = ahci_platform_suspend_host(dev); if (rc) return rc; if (pdata && pdata->suspend) { rc = pdata->suspend(dev); if (rc) goto resume_host; } ahci_platform_disable_resources(hpriv); return 0; resume_host: ahci_platform_resume_host(dev); return rc; } EXPORT_SYMBOL_GPL(ahci_platform_suspend); /** * ahci_platform_resume - Resume an ahci-platform device * @dev: the platform device to resume * * This function enables all the resources of the device followed by * resuming the host associated with the device. * * RETURNS: * 0 on success otherwise a negative error code */ int ahci_platform_resume(struct device *dev) { struct ahci_platform_data *pdata = dev_get_platdata(dev); struct ata_host *host = dev_get_drvdata(dev); struct ahci_host_priv *hpriv = host->private_data; int rc; rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; if (pdata && pdata->resume) { rc = pdata->resume(dev); if (rc) goto disable_resources; } rc = ahci_platform_resume_host(dev); if (rc) goto disable_resources; /* We resumed so update PM runtime state */ pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); return 0; disable_resources: ahci_platform_disable_resources(hpriv); return rc; } EXPORT_SYMBOL_GPL(ahci_platform_resume); #endif MODULE_DESCRIPTION("AHCI SATA platform library"); MODULE_AUTHOR("Anton Vorontsov "); MODULE_LICENSE("GPL");