// SPDX-License-Identifier: GPL-2.0 /* * drivers/base/dd.c - The core device/driver interactions. * * This file contains the (sometimes tricky) code that controls the * interactions between devices and drivers, which primarily includes * driver binding and unbinding. * * All of this code used to exist in drivers/base/bus.c, but was * relocated to here in the name of compartmentalization (since it wasn't * strictly code just for the 'struct bus_type'. * * Copyright (c) 2002-5 Patrick Mochel * Copyright (c) 2002-3 Open Source Development Labs * Copyright (c) 2007-2009 Greg Kroah-Hartman * Copyright (c) 2007-2009 Novell Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "base.h" #include "power/power.h" /* * Deferred Probe infrastructure. * * Sometimes driver probe order matters, but the kernel doesn't always have * dependency information which means some drivers will get probed before a * resource it depends on is available. For example, an SDHCI driver may * first need a GPIO line from an i2c GPIO controller before it can be * initialized. If a required resource is not available yet, a driver can * request probing to be deferred by returning -EPROBE_DEFER from its probe hook * * Deferred probe maintains two lists of devices, a pending list and an active * list. A driver returning -EPROBE_DEFER causes the device to be added to the * pending list. A successful driver probe will trigger moving all devices * from the pending to the active list so that the workqueue will eventually * retry them. * * The deferred_probe_mutex must be held any time the deferred_probe_*_list * of the (struct device*)->p->deferred_probe pointers are manipulated */ static DEFINE_MUTEX(deferred_probe_mutex); static LIST_HEAD(deferred_probe_pending_list); static LIST_HEAD(deferred_probe_active_list); static atomic_t deferred_trigger_count = ATOMIC_INIT(0); static bool initcalls_done; /* Save the async probe drivers' name from kernel cmdline */ #define ASYNC_DRV_NAMES_MAX_LEN 256 static char async_probe_drv_names[ASYNC_DRV_NAMES_MAX_LEN]; static bool async_probe_default; /* * In some cases, like suspend to RAM or hibernation, It might be reasonable * to prohibit probing of devices as it could be unsafe. * Once defer_all_probes is true all drivers probes will be forcibly deferred. */ static bool defer_all_probes; static void __device_set_deferred_probe_reason(const struct device *dev, char *reason) { kfree(dev->p->deferred_probe_reason); dev->p->deferred_probe_reason = reason; } /* * deferred_probe_work_func() - Retry probing devices in the active list. */ static void deferred_probe_work_func(struct work_struct *work) { struct device *dev; struct device_private *private; /* * This block processes every device in the deferred 'active' list. * Each device is removed from the active list and passed to * bus_probe_device() to re-attempt the probe. The loop continues * until every device in the active list is removed and retried. * * Note: Once the device is removed from the list and the mutex is * released, it is possible for the device get freed by another thread * and cause a illegal pointer dereference. This code uses * get/put_device() to ensure the device structure cannot disappear * from under our feet. */ mutex_lock(&deferred_probe_mutex); while (!list_empty(&deferred_probe_active_list)) { private = list_first_entry(&deferred_probe_active_list, typeof(*dev->p), deferred_probe); dev = private->device; list_del_init(&private->deferred_probe); get_device(dev); __device_set_deferred_probe_reason(dev, NULL); /* * Drop the mutex while probing each device; the probe path may * manipulate the deferred list */ mutex_unlock(&deferred_probe_mutex); /* * Force the device to the end of the dpm_list since * the PM code assumes that the order we add things to * the list is a good order for suspend but deferred * probe makes that very unsafe. */ device_pm_move_to_tail(dev); dev_dbg(dev, "Retrying from deferred list\n"); bus_probe_device(dev); mutex_lock(&deferred_probe_mutex); put_device(dev); } mutex_unlock(&deferred_probe_mutex); } static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func); void driver_deferred_probe_add(struct device *dev) { if (!dev->can_match) return; mutex_lock(&deferred_probe_mutex); if (list_empty(&dev->p->deferred_probe)) { dev_dbg(dev, "Added to deferred list\n"); list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list); } mutex_unlock(&deferred_probe_mutex); } void driver_deferred_probe_del(struct device *dev) { mutex_lock(&deferred_probe_mutex); if (!list_empty(&dev->p->deferred_probe)) { dev_dbg(dev, "Removed from deferred list\n"); list_del_init(&dev->p->deferred_probe); __device_set_deferred_probe_reason(dev, NULL); } mutex_unlock(&deferred_probe_mutex); } static bool driver_deferred_probe_enable; /** * driver_deferred_probe_trigger() - Kick off re-probing deferred devices * * This functions moves all devices from the pending list to the active * list and schedules the deferred probe workqueue to process them. It * should be called anytime a driver is successfully bound to a device. * * Note, there is a race condition in multi-threaded probe. In the case where * more than one device is probing at the same time, it is possible for one * probe to complete successfully while another is about to defer. If the second * depends on the first, then it will get put on the pending list after the * trigger event has already occurred and will be stuck there. * * The atomic 'deferred_trigger_count' is used to determine if a successful * trigger has occurred in the midst of probing a driver. If the trigger count * changes in the midst of a probe, then deferred processing should be triggered * again. */ void driver_deferred_probe_trigger(void) { if (!driver_deferred_probe_enable) return; /* * A successful probe means that all the devices in the pending list * should be triggered to be reprobed. Move all the deferred devices * into the active list so they can be retried by the workqueue */ mutex_lock(&deferred_probe_mutex); atomic_inc(&deferred_trigger_count); list_splice_tail_init(&deferred_probe_pending_list, &deferred_probe_active_list); mutex_unlock(&deferred_probe_mutex); /* * Kick the re-probe thread. It may already be scheduled, but it is * safe to kick it again. */ queue_work(system_unbound_wq, &deferred_probe_work); } /** * device_block_probing() - Block/defer device's probes * * It will disable probing of devices and defer their probes instead. */ void device_block_probing(void) { defer_all_probes = true; /* sync with probes to avoid races. */ wait_for_device_probe(); } /** * device_unblock_probing() - Unblock/enable device's probes * * It will restore normal behavior and trigger re-probing of deferred * devices. */ void device_unblock_probing(void) { defer_all_probes = false; driver_deferred_probe_trigger(); } /** * device_set_deferred_probe_reason() - Set defer probe reason message for device * @dev: the pointer to the struct device * @vaf: the pointer to va_format structure with message */ void device_set_deferred_probe_reason(const struct device *dev, struct va_format *vaf) { const char *drv = dev_driver_string(dev); char *reason; mutex_lock(&deferred_probe_mutex); reason = kasprintf(GFP_KERNEL, "%s: %pV", drv, vaf); __device_set_deferred_probe_reason(dev, reason); mutex_unlock(&deferred_probe_mutex); } /* * deferred_devs_show() - Show the devices in the deferred probe pending list. */ static int deferred_devs_show(struct seq_file *s, void *data) { struct device_private *curr; mutex_lock(&deferred_probe_mutex); list_for_each_entry(curr, &deferred_probe_pending_list, deferred_probe) seq_printf(s, "%s\t%s", dev_name(curr->device), curr->device->p->deferred_probe_reason ?: "\n"); mutex_unlock(&deferred_probe_mutex); return 0; } DEFINE_SHOW_ATTRIBUTE(deferred_devs); #ifdef CONFIG_MODULES int driver_deferred_probe_timeout = 10; #else int driver_deferred_probe_timeout; #endif EXPORT_SYMBOL_GPL(driver_deferred_probe_timeout); static int __init deferred_probe_timeout_setup(char *str) { int timeout; if (!kstrtoint(str, 10, &timeout)) driver_deferred_probe_timeout = timeout; return 1; } __setup("deferred_probe_timeout=", deferred_probe_timeout_setup); /** * driver_deferred_probe_check_state() - Check deferred probe state * @dev: device to check * * Return: * * -ENODEV if initcalls have completed and modules are disabled. * * -ETIMEDOUT if the deferred probe timeout was set and has expired * and modules are enabled. * * -EPROBE_DEFER in other cases. * * Drivers or subsystems can opt-in to calling this function instead of directly * returning -EPROBE_DEFER. */ int driver_deferred_probe_check_state(struct device *dev) { if (!IS_ENABLED(CONFIG_MODULES) && initcalls_done) { dev_warn(dev, "ignoring dependency for device, assuming no driver\n"); return -ENODEV; } if (!driver_deferred_probe_timeout && initcalls_done) { dev_warn(dev, "deferred probe timeout, ignoring dependency\n"); return -ETIMEDOUT; } return -EPROBE_DEFER; } EXPORT_SYMBOL_GPL(driver_deferred_probe_check_state); static void deferred_probe_timeout_work_func(struct work_struct *work) { struct device_private *p; fw_devlink_drivers_done(); driver_deferred_probe_timeout = 0; driver_deferred_probe_trigger(); flush_work(&deferred_probe_work); mutex_lock(&deferred_probe_mutex); list_for_each_entry(p, &deferred_probe_pending_list, deferred_probe) dev_info(p->device, "deferred probe pending\n"); mutex_unlock(&deferred_probe_mutex); } static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func); void deferred_probe_extend_timeout(void) { /* * If the work hasn't been queued yet or if the work expired, don't * start a new one. */ if (cancel_delayed_work(&deferred_probe_timeout_work)) { schedule_delayed_work(&deferred_probe_timeout_work, driver_deferred_probe_timeout * HZ); pr_debug("Extended deferred probe timeout by %d secs\n", driver_deferred_probe_timeout); } } /** * deferred_probe_initcall() - Enable probing of deferred devices * * We don't want to get in the way when the bulk of drivers are getting probed. * Instead, this initcall makes sure that deferred probing is delayed until * late_initcall time. */ static int deferred_probe_initcall(void) { debugfs_create_file("devices_deferred", 0444, NULL, NULL, &deferred_devs_fops); driver_deferred_probe_enable = true; driver_deferred_probe_trigger(); /* Sort as many dependencies as possible before exiting initcalls */ flush_work(&deferred_probe_work); initcalls_done = true; if (!IS_ENABLED(CONFIG_MODULES)) fw_devlink_drivers_done(); /* * Trigger deferred probe again, this time we won't defer anything * that is optional */ driver_deferred_probe_trigger(); flush_work(&deferred_probe_work); if (driver_deferred_probe_timeout > 0) { schedule_delayed_work(&deferred_probe_timeout_work, driver_deferred_probe_timeout * HZ); } return 0; } late_initcall(deferred_probe_initcall); static void __exit deferred_probe_exit(void) { debugfs_remove_recursive(debugfs_lookup("devices_deferred", NULL)); } __exitcall(deferred_probe_exit); /** * device_is_bound() - Check if device is bound to a driver * @dev: device to check * * Returns true if passed device has already finished probing successfully * against a driver. * * This function must be called with the device lock held. */ bool device_is_bound(struct device *dev) { return dev->p && klist_node_attached(&dev->p->knode_driver); } static void driver_bound(struct device *dev) { if (device_is_bound(dev)) { pr_warn("%s: device %s already bound\n", __func__, kobject_name(&dev->kobj)); return; } pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name, __func__, dev_name(dev)); klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices); device_links_driver_bound(dev); device_pm_check_callbacks(dev); /* * Make sure the device is no longer in one of the deferred lists and * kick off retrying all pending devices */ driver_deferred_probe_del(dev); driver_deferred_probe_trigger(); if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_BOUND_DRIVER, dev); kobject_uevent(&dev->kobj, KOBJ_BIND); } static ssize_t coredump_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { device_lock(dev); dev->driver->coredump(dev); device_unlock(dev); return count; } static DEVICE_ATTR_WO(coredump); static int driver_sysfs_add(struct device *dev) { int ret; if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_BIND_DRIVER, dev); ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj, kobject_name(&dev->kobj)); if (ret) goto fail; ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj, "driver"); if (ret) goto rm_dev; if (!IS_ENABLED(CONFIG_DEV_COREDUMP) || !dev->driver->coredump) return 0; ret = device_create_file(dev, &dev_attr_coredump); if (!ret) return 0; sysfs_remove_link(&dev->kobj, "driver"); rm_dev: sysfs_remove_link(&dev->driver->p->kobj, kobject_name(&dev->kobj)); fail: return ret; } static void driver_sysfs_remove(struct device *dev) { struct device_driver *drv = dev->driver; if (drv) { if (drv->coredump) device_remove_file(dev, &dev_attr_coredump); sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj)); sysfs_remove_link(&dev->kobj, "driver"); } } /** * device_bind_driver - bind a driver to one device. * @dev: device. * * Allow manual attachment of a driver to a device. * Caller must have already set @dev->driver. * * Note that this does not modify the bus reference count. * Please verify that is accounted for before calling this. * (It is ok to call with no other effort from a driver's probe() method.) * * This function must be called with the device lock held. * * Callers should prefer to use device_driver_attach() instead. */ int device_bind_driver(struct device *dev) { int ret; ret = driver_sysfs_add(dev); if (!ret) { device_links_force_bind(dev); driver_bound(dev); } else if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_DRIVER_NOT_BOUND, dev); return ret; } EXPORT_SYMBOL_GPL(device_bind_driver); static atomic_t probe_count = ATOMIC_INIT(0); static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue); static ssize_t state_synced_show(struct device *dev, struct device_attribute *attr, char *buf) { bool val; device_lock(dev); val = dev->state_synced; device_unlock(dev); return sysfs_emit(buf, "%u\n", val); } static DEVICE_ATTR_RO(state_synced); static void device_unbind_cleanup(struct device *dev) { devres_release_all(dev); arch_teardown_dma_ops(dev); kfree(dev->dma_range_map); dev->dma_range_map = NULL; dev->driver = NULL; dev_set_drvdata(dev, NULL); if (dev->pm_domain && dev->pm_domain->dismiss) dev->pm_domain->dismiss(dev); pm_runtime_reinit(dev); dev_pm_set_driver_flags(dev, 0); } static void device_remove(struct device *dev) { device_remove_file(dev, &dev_attr_state_synced); device_remove_groups(dev, dev->driver->dev_groups); if (dev->bus && dev->bus->remove) dev->bus->remove(dev); else if (dev->driver->remove) dev->driver->remove(dev); } static int call_driver_probe(struct device *dev, struct device_driver *drv) { int ret = 0; if (dev->bus->probe) ret = dev->bus->probe(dev); else if (drv->probe) ret = drv->probe(dev); switch (ret) { case 0: break; case -EPROBE_DEFER: /* Driver requested deferred probing */ dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name); break; case -ENODEV: case -ENXIO: pr_debug("%s: probe of %s rejects match %d\n", drv->name, dev_name(dev), ret); break; default: /* driver matched but the probe failed */ pr_warn("%s: probe of %s failed with error %d\n", drv->name, dev_name(dev), ret); break; } return ret; } static int really_probe(struct device *dev, struct device_driver *drv) { bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) && !drv->suppress_bind_attrs; int ret, link_ret; if (defer_all_probes) { /* * Value of defer_all_probes can be set only by * device_block_probing() which, in turn, will call * wait_for_device_probe() right after that to avoid any races. */ dev_dbg(dev, "Driver %s force probe deferral\n", drv->name); return -EPROBE_DEFER; } link_ret = device_links_check_suppliers(dev); if (link_ret == -EPROBE_DEFER) return link_ret; pr_debug("bus: '%s': %s: probing driver %s with device %s\n", drv->bus->name, __func__, drv->name, dev_name(dev)); if (!list_empty(&dev->devres_head)) { dev_crit(dev, "Resources present before probing\n"); ret = -EBUSY; goto done; } re_probe: dev->driver = drv; /* If using pinctrl, bind pins now before probing */ ret = pinctrl_bind_pins(dev); if (ret) goto pinctrl_bind_failed; if (dev->bus->dma_configure) { ret = dev->bus->dma_configure(dev); if (ret) goto pinctrl_bind_failed; } ret = driver_sysfs_add(dev); if (ret) { pr_err("%s: driver_sysfs_add(%s) failed\n", __func__, dev_name(dev)); goto sysfs_failed; } if (dev->pm_domain && dev->pm_domain->activate) { ret = dev->pm_domain->activate(dev); if (ret) goto probe_failed; } ret = call_driver_probe(dev, drv); if (ret) { /* * If fw_devlink_best_effort is active (denoted by -EAGAIN), the * device might actually probe properly once some of its missing * suppliers have probed. So, treat this as if the driver * returned -EPROBE_DEFER. */ if (link_ret == -EAGAIN) ret = -EPROBE_DEFER; /* * Return probe errors as positive values so that the callers * can distinguish them from other errors. */ ret = -ret; goto probe_failed; } ret = device_add_groups(dev, drv->dev_groups); if (ret) { dev_err(dev, "device_add_groups() failed\n"); goto dev_groups_failed; } if (dev_has_sync_state(dev)) { ret = device_create_file(dev, &dev_attr_state_synced); if (ret) { dev_err(dev, "state_synced sysfs add failed\n"); goto dev_sysfs_state_synced_failed; } } if (test_remove) { test_remove = false; device_remove(dev); driver_sysfs_remove(dev); device_unbind_cleanup(dev); goto re_probe; } pinctrl_init_done(dev); if (dev->pm_domain && dev->pm_domain->sync) dev->pm_domain->sync(dev); driver_bound(dev); pr_debug("bus: '%s': %s: bound device %s to driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); goto done; dev_sysfs_state_synced_failed: dev_groups_failed: device_remove(dev); probe_failed: driver_sysfs_remove(dev); sysfs_failed: if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_DRIVER_NOT_BOUND, dev); if (dev->bus && dev->bus->dma_cleanup) dev->bus->dma_cleanup(dev); pinctrl_bind_failed: device_links_no_driver(dev); device_unbind_cleanup(dev); done: return ret; } /* * For initcall_debug, show the driver probe time. */ static int really_probe_debug(struct device *dev, struct device_driver *drv) { ktime_t calltime, rettime; int ret; calltime = ktime_get(); ret = really_probe(dev, drv); rettime = ktime_get(); pr_debug("probe of %s returned %d after %lld usecs\n", dev_name(dev), ret, ktime_us_delta(rettime, calltime)); return ret; } /** * driver_probe_done * Determine if the probe sequence is finished or not. * * Should somehow figure out how to use a semaphore, not an atomic variable... */ int driver_probe_done(void) { int local_probe_count = atomic_read(&probe_count); pr_debug("%s: probe_count = %d\n", __func__, local_probe_count); if (local_probe_count) return -EBUSY; return 0; } /** * wait_for_device_probe * Wait for device probing to be completed. */ void wait_for_device_probe(void) { /* wait for the deferred probe workqueue to finish */ flush_work(&deferred_probe_work); /* wait for the known devices to complete their probing */ wait_event(probe_waitqueue, atomic_read(&probe_count) == 0); async_synchronize_full(); } EXPORT_SYMBOL_GPL(wait_for_device_probe); static int __driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (dev->p->dead || !device_is_registered(dev)) return -ENODEV; if (dev->driver) return -EBUSY; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); return ret; } /** * driver_probe_device - attempt to bind device & driver together * @drv: driver to bind a device to * @dev: device to try to bind to the driver * * This function returns -ENODEV if the device is not registered, -EBUSY if it * already has a driver, 0 if the device is bound successfully and a positive * (inverted) error code for failures from the ->probe method. * * This function must be called with @dev lock held. When called for a * USB interface, @dev->parent lock must be held as well. * * If the device has a parent, runtime-resume the parent before driver probing. */ static int driver_probe_device(struct device_driver *drv, struct device *dev) { int trigger_count = atomic_read(&deferred_trigger_count); int ret; atomic_inc(&probe_count); ret = __driver_probe_device(drv, dev); if (ret == -EPROBE_DEFER || ret == EPROBE_DEFER) { driver_deferred_probe_add(dev); /* * Did a trigger occur while probing? Need to re-trigger if yes */ if (trigger_count != atomic_read(&deferred_trigger_count) && !defer_all_probes) driver_deferred_probe_trigger(); } atomic_dec(&probe_count); wake_up_all(&probe_waitqueue); return ret; } static inline bool cmdline_requested_async_probing(const char *drv_name) { bool async_drv; async_drv = parse_option_str(async_probe_drv_names, drv_name); return (async_probe_default != async_drv); } /* The option format is "driver_async_probe=drv_name1,drv_name2,..." */ static int __init save_async_options(char *buf) { if (strlen(buf) >= ASYNC_DRV_NAMES_MAX_LEN) pr_warn("Too long list of driver names for 'driver_async_probe'!\n"); strscpy(async_probe_drv_names, buf, ASYNC_DRV_NAMES_MAX_LEN); async_probe_default = parse_option_str(async_probe_drv_names, "*"); return 1; } __setup("driver_async_probe=", save_async_options); bool driver_allows_async_probing(struct device_driver *drv) { switch (drv->probe_type) { case PROBE_PREFER_ASYNCHRONOUS: return true; case PROBE_FORCE_SYNCHRONOUS: return false; default: if (cmdline_requested_async_probing(drv->name)) return true; if (module_requested_async_probing(drv->owner)) return true; return false; } } struct device_attach_data { struct device *dev; /* * Indicates whether we are considering asynchronous probing or * not. Only initial binding after device or driver registration * (including deferral processing) may be done asynchronously, the * rest is always synchronous, as we expect it is being done by * request from userspace. */ bool check_async; /* * Indicates if we are binding synchronous or asynchronous drivers. * When asynchronous probing is enabled we'll execute 2 passes * over drivers: first pass doing synchronous probing and second * doing asynchronous probing (if synchronous did not succeed - * most likely because there was no driver requiring synchronous * probing - and we found asynchronous driver during first pass). * The 2 passes are done because we can't shoot asynchronous * probe for given device and driver from bus_for_each_drv() since * driver pointer is not guaranteed to stay valid once * bus_for_each_drv() iterates to the next driver on the bus. */ bool want_async; /* * We'll set have_async to 'true' if, while scanning for matching * driver, we'll encounter one that requests asynchronous probing. */ bool have_async; }; static int __device_attach_driver(struct device_driver *drv, void *_data) { struct device_attach_data *data = _data; struct device *dev = data->dev; bool async_allowed; int ret; ret = driver_match_device(drv, dev); if (ret == 0) { /* no match */ return 0; } else if (ret == -EPROBE_DEFER) { dev_dbg(dev, "Device match requests probe deferral\n"); dev->can_match = true; driver_deferred_probe_add(dev); /* * Device can't match with a driver right now, so don't attempt * to match or bind with other drivers on the bus. */ return ret; } else if (ret < 0) { dev_dbg(dev, "Bus failed to match device: %d\n", ret); return ret; } /* ret > 0 means positive match */ async_allowed = driver_allows_async_probing(drv); if (async_allowed) data->have_async = true; if (data->check_async && async_allowed != data->want_async) return 0; /* * Ignore errors returned by ->probe so that the next driver can try * its luck. */ ret = driver_probe_device(drv, dev); if (ret < 0) return ret; return ret == 0; } static void __device_attach_async_helper(void *_dev, async_cookie_t cookie) { struct device *dev = _dev; struct device_attach_data data = { .dev = dev, .check_async = true, .want_async = true, }; device_lock(dev); /* * Check if device has already been removed or claimed. This may * happen with driver loading, device discovery/registration, * and deferred probe processing happens all at once with * multiple threads. */ if (dev->p->dead || dev->driver) goto out_unlock; if (dev->parent) pm_runtime_get_sync(dev->parent); bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver); dev_dbg(dev, "async probe completed\n"); pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); out_unlock: device_unlock(dev); put_device(dev); } static int __device_attach(struct device *dev, bool allow_async) { int ret = 0; bool async = false; device_lock(dev); if (dev->p->dead) { goto out_unlock; } else if (dev->driver) { if (device_is_bound(dev)) { ret = 1; goto out_unlock; } ret = device_bind_driver(dev); if (ret == 0) ret = 1; else { dev->driver = NULL; ret = 0; } } else { struct device_attach_data data = { .dev = dev, .check_async = allow_async, .want_async = false, }; if (dev->parent) pm_runtime_get_sync(dev->parent); ret = bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver); if (!ret && allow_async && data.have_async) { /* * If we could not find appropriate driver * synchronously and we are allowed to do * async probes and there are drivers that * want to probe asynchronously, we'll * try them. */ dev_dbg(dev, "scheduling asynchronous probe\n"); get_device(dev); async = true; } else { pm_request_idle(dev); } if (dev->parent) pm_runtime_put(dev->parent); } out_unlock: device_unlock(dev); if (async) async_schedule_dev(__device_attach_async_helper, dev); return ret; } /** * device_attach - try to attach device to a driver. * @dev: device. * * Walk the list of drivers that the bus has and call * driver_probe_device() for each pair. If a compatible * pair is found, break out and return. * * Returns 1 if the device was bound to a driver; * 0 if no matching driver was found; * -ENODEV if the device is not registered. * * When called for a USB interface, @dev->parent lock must be held. */ int device_attach(struct device *dev) { return __device_attach(dev, false); } EXPORT_SYMBOL_GPL(device_attach); void device_initial_probe(struct device *dev) { __device_attach(dev, true); } /* * __device_driver_lock - acquire locks needed to manipulate dev->drv * @dev: Device we will update driver info for * @parent: Parent device. Needed if the bus requires parent lock * * This function will take the required locks for manipulating dev->drv. * Normally this will just be the @dev lock, but when called for a USB * interface, @parent lock will be held as well. */ static void __device_driver_lock(struct device *dev, struct device *parent) { if (parent && dev->bus->need_parent_lock) device_lock(parent); device_lock(dev); } /* * __device_driver_unlock - release locks needed to manipulate dev->drv * @dev: Device we will update driver info for * @parent: Parent device. Needed if the bus requires parent lock * * This function will release the required locks for manipulating dev->drv. * Normally this will just be the @dev lock, but when called for a * USB interface, @parent lock will be released as well. */ static void __device_driver_unlock(struct device *dev, struct device *parent) { device_unlock(dev); if (parent && dev->bus->need_parent_lock) device_unlock(parent); } /** * device_driver_attach - attach a specific driver to a specific device * @drv: Driver to attach * @dev: Device to attach it to * * Manually attach driver to a device. Will acquire both @dev lock and * @dev->parent lock if needed. Returns 0 on success, -ERR on failure. */ int device_driver_attach(struct device_driver *drv, struct device *dev) { int ret; __device_driver_lock(dev, dev->parent); ret = __driver_probe_device(drv, dev); __device_driver_unlock(dev, dev->parent); /* also return probe errors as normal negative errnos */ if (ret > 0) ret = -ret; if (ret == -EPROBE_DEFER) return -EAGAIN; return ret; } EXPORT_SYMBOL_GPL(device_driver_attach); static void __driver_attach_async_helper(void *_dev, async_cookie_t cookie) { struct device *dev = _dev; struct device_driver *drv; int ret; __device_driver_lock(dev, dev->parent); drv = dev->p->async_driver; dev->p->async_driver = NULL; ret = driver_probe_device(drv, dev); __device_driver_unlock(dev, dev->parent); dev_dbg(dev, "driver %s async attach completed: %d\n", drv->name, ret); put_device(dev); } static int __driver_attach(struct device *dev, void *data) { struct device_driver *drv = data; bool async = false; int ret; /* * Lock device and try to bind to it. We drop the error * here and always return 0, because we need to keep trying * to bind to devices and some drivers will return an error * simply if it didn't support the device. * * driver_probe_device() will spit a warning if there * is an error. */ ret = driver_match_device(drv, dev); if (ret == 0) { /* no match */ return 0; } else if (ret == -EPROBE_DEFER) { dev_dbg(dev, "Device match requests probe deferral\n"); dev->can_match = true; driver_deferred_probe_add(dev); /* * Driver could not match with device, but may match with * another device on the bus. */ return 0; } else if (ret < 0) { dev_dbg(dev, "Bus failed to match device: %d\n", ret); return ret; } /* ret > 0 means positive match */ if (driver_allows_async_probing(drv)) { /* * Instead of probing the device synchronously we will * probe it asynchronously to allow for more parallelism. * * We only take the device lock here in order to guarantee * that the dev->driver and async_driver fields are protected */ dev_dbg(dev, "probing driver %s asynchronously\n", drv->name); device_lock(dev); if (!dev->driver && !dev->p->async_driver) { get_device(dev); dev->p->async_driver = drv; async = true; } device_unlock(dev); if (async) async_schedule_dev(__driver_attach_async_helper, dev); return 0; } __device_driver_lock(dev, dev->parent); driver_probe_device(drv, dev); __device_driver_unlock(dev, dev->parent); return 0; } /** * driver_attach - try to bind driver to devices. * @drv: driver. * * Walk the list of devices that the bus has on it and try to * match the driver with each one. If driver_probe_device() * returns 0 and the @dev->driver is set, we've found a * compatible pair. */ int driver_attach(struct device_driver *drv) { return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach); } EXPORT_SYMBOL_GPL(driver_attach); /* * __device_release_driver() must be called with @dev lock held. * When called for a USB interface, @dev->parent lock must be held as well. */ static void __device_release_driver(struct device *dev, struct device *parent) { struct device_driver *drv; drv = dev->driver; if (drv) { pm_runtime_get_sync(dev); while (device_links_busy(dev)) { __device_driver_unlock(dev, parent); device_links_unbind_consumers(dev); __device_driver_lock(dev, parent); /* * A concurrent invocation of the same function might * have released the driver successfully while this one * was waiting, so check for that. */ if (dev->driver != drv) { pm_runtime_put(dev); return; } } driver_sysfs_remove(dev); if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_UNBIND_DRIVER, dev); pm_runtime_put_sync(dev); device_remove(dev); if (dev->bus && dev->bus->dma_cleanup) dev->bus->dma_cleanup(dev); device_links_driver_cleanup(dev); device_unbind_cleanup(dev); klist_remove(&dev->p->knode_driver); device_pm_check_callbacks(dev); if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, BUS_NOTIFY_UNBOUND_DRIVER, dev); kobject_uevent(&dev->kobj, KOBJ_UNBIND); } } void device_release_driver_internal(struct device *dev, struct device_driver *drv, struct device *parent) { __device_driver_lock(dev, parent); if (!drv || drv == dev->driver) __device_release_driver(dev, parent); __device_driver_unlock(dev, parent); } /** * device_release_driver - manually detach device from driver. * @dev: device. * * Manually detach device from driver. * When called for a USB interface, @dev->parent lock must be held. * * If this function is to be called with @dev->parent lock held, ensure that * the device's consumers are unbound in advance or that their locks can be * acquired under the @dev->parent lock. */ void device_release_driver(struct device *dev) { /* * If anyone calls device_release_driver() recursively from * within their ->remove callback for the same device, they * will deadlock right here. */ device_release_driver_internal(dev, NULL, NULL); } EXPORT_SYMBOL_GPL(device_release_driver); /** * device_driver_detach - detach driver from a specific device * @dev: device to detach driver from * * Detach driver from device. Will acquire both @dev lock and @dev->parent * lock if needed. */ void device_driver_detach(struct device *dev) { device_release_driver_internal(dev, NULL, dev->parent); } /** * driver_detach - detach driver from all devices it controls. * @drv: driver. */ void driver_detach(struct device_driver *drv) { struct device_private *dev_prv; struct device *dev; if (driver_allows_async_probing(drv)) async_synchronize_full(); for (;;) { spin_lock(&drv->p->klist_devices.k_lock); if (list_empty(&drv->p->klist_devices.k_list)) { spin_unlock(&drv->p->klist_devices.k_lock); break; } dev_prv = list_last_entry(&drv->p->klist_devices.k_list, struct device_private, knode_driver.n_node); dev = dev_prv->device; get_device(dev); spin_unlock(&drv->p->klist_devices.k_lock); device_release_driver_internal(dev, drv, dev->parent); put_device(dev); } }