// SPDX-License-Identifier: GPL-2.0-or-later /* * * Bluetooth HCI UART driver for Broadcom devices * * Copyright (C) 2015 Intel Corporation */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "btbcm.h" #include "hci_uart.h" #define BCM_NULL_PKT 0x00 #define BCM_NULL_SIZE 0 #define BCM_LM_DIAG_PKT 0x07 #define BCM_LM_DIAG_SIZE 63 #define BCM_TYPE49_PKT 0x31 #define BCM_TYPE49_SIZE 0 #define BCM_TYPE52_PKT 0x34 #define BCM_TYPE52_SIZE 0 #define BCM_AUTOSUSPEND_DELAY 5000 /* default autosleep delay */ #define BCM_NUM_SUPPLIES 2 /** * struct bcm_device - device driver resources * @serdev_hu: HCI UART controller struct * @list: bcm_device_list node * @dev: physical UART slave * @name: device name logged by bt_dev_*() functions * @device_wakeup: BT_WAKE pin, * assert = Bluetooth device must wake up or remain awake, * deassert = Bluetooth device may sleep when sleep criteria are met * @shutdown: BT_REG_ON pin, * power up or power down Bluetooth device internal regulators * @set_device_wakeup: callback to toggle BT_WAKE pin * either by accessing @device_wakeup or by calling @btlp * @set_shutdown: callback to toggle BT_REG_ON pin * either by accessing @shutdown or by calling @btpu/@btpd * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power") * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up") * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down") * @txco_clk: external reference frequency clock used by Bluetooth device * @lpo_clk: external LPO clock used by Bluetooth device * @supplies: VBAT and VDDIO supplies used by Bluetooth device * @res_enabled: whether clocks and supplies are prepared and enabled * @init_speed: default baudrate of Bluetooth device; * the host UART is initially set to this baudrate so that * it can configure the Bluetooth device for @oper_speed * @oper_speed: preferred baudrate of Bluetooth device; * set to 0 if @init_speed is already the preferred baudrate * @irq: interrupt triggered by HOST_WAKE_BT pin * @irq_active_low: whether @irq is active low * @hu: pointer to HCI UART controller struct, * used to disable flow control during runtime suspend and system sleep * @is_suspended: whether flow control is currently disabled */ struct bcm_device { /* Must be the first member, hci_serdev.c expects this. */ struct hci_uart serdev_hu; struct list_head list; struct device *dev; const char *name; struct gpio_desc *device_wakeup; struct gpio_desc *shutdown; int (*set_device_wakeup)(struct bcm_device *, bool); int (*set_shutdown)(struct bcm_device *, bool); #ifdef CONFIG_ACPI acpi_handle btlp, btpu, btpd; int gpio_count; int gpio_int_idx; #endif struct clk *txco_clk; struct clk *lpo_clk; struct regulator_bulk_data supplies[BCM_NUM_SUPPLIES]; bool res_enabled; u32 init_speed; u32 oper_speed; int irq; bool irq_active_low; #ifdef CONFIG_PM struct hci_uart *hu; bool is_suspended; #endif }; /* generic bcm uart resources */ struct bcm_data { struct sk_buff *rx_skb; struct sk_buff_head txq; struct bcm_device *dev; }; /* List of BCM BT UART devices */ static DEFINE_MUTEX(bcm_device_lock); static LIST_HEAD(bcm_device_list); static int irq_polarity = -1; module_param(irq_polarity, int, 0444); MODULE_PARM_DESC(irq_polarity, "IRQ polarity 0: active-high 1: active-low"); static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed) { if (hu->serdev) serdev_device_set_baudrate(hu->serdev, speed); else hci_uart_set_baudrate(hu, speed); } static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed) { struct hci_dev *hdev = hu->hdev; struct sk_buff *skb; struct bcm_update_uart_baud_rate param; if (speed > 3000000) { struct bcm_write_uart_clock_setting clock; clock.type = BCM_UART_CLOCK_48MHZ; bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type); /* This Broadcom specific command changes the UART's controller * clock for baud rate > 3000000. */ skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { int err = PTR_ERR(skb); bt_dev_err(hdev, "BCM: failed to write clock (%d)", err); return err; } kfree_skb(skb); } bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed); param.zero = cpu_to_le16(0); param.baud_rate = cpu_to_le32(speed); /* This Broadcom specific command changes the UART's controller baud * rate. */ skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), ¶m, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { int err = PTR_ERR(skb); bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)", err); return err; } kfree_skb(skb); return 0; } /* bcm_device_exists should be protected by bcm_device_lock */ static bool bcm_device_exists(struct bcm_device *device) { struct list_head *p; #ifdef CONFIG_PM /* Devices using serdev always exist */ if (device && device->hu && device->hu->serdev) return true; #endif list_for_each(p, &bcm_device_list) { struct bcm_device *dev = list_entry(p, struct bcm_device, list); if (device == dev) return true; } return false; } static int bcm_gpio_set_power(struct bcm_device *dev, bool powered) { int err; if (powered && !dev->res_enabled) { /* Intel Macs use bcm_apple_get_resources() and don't * have regulator supplies configured. */ if (dev->supplies[0].supply) { err = regulator_bulk_enable(BCM_NUM_SUPPLIES, dev->supplies); if (err) return err; } /* LPO clock needs to be 32.768 kHz */ err = clk_set_rate(dev->lpo_clk, 32768); if (err) { dev_err(dev->dev, "Could not set LPO clock rate\n"); goto err_regulator_disable; } err = clk_prepare_enable(dev->lpo_clk); if (err) goto err_regulator_disable; err = clk_prepare_enable(dev->txco_clk); if (err) goto err_lpo_clk_disable; } err = dev->set_shutdown(dev, powered); if (err) goto err_txco_clk_disable; err = dev->set_device_wakeup(dev, powered); if (err) goto err_revert_shutdown; if (!powered && dev->res_enabled) { clk_disable_unprepare(dev->txco_clk); clk_disable_unprepare(dev->lpo_clk); /* Intel Macs use bcm_apple_get_resources() and don't * have regulator supplies configured. */ if (dev->supplies[0].supply) regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies); } /* wait for device to power on and come out of reset */ usleep_range(100000, 120000); dev->res_enabled = powered; return 0; err_revert_shutdown: dev->set_shutdown(dev, !powered); err_txco_clk_disable: if (powered && !dev->res_enabled) clk_disable_unprepare(dev->txco_clk); err_lpo_clk_disable: if (powered && !dev->res_enabled) clk_disable_unprepare(dev->lpo_clk); err_regulator_disable: if (powered && !dev->res_enabled) regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies); return err; } #ifdef CONFIG_PM static irqreturn_t bcm_host_wake(int irq, void *data) { struct bcm_device *bdev = data; bt_dev_dbg(bdev, "Host wake IRQ"); pm_runtime_get(bdev->dev); pm_runtime_mark_last_busy(bdev->dev); pm_runtime_put_autosuspend(bdev->dev); return IRQ_HANDLED; } static int bcm_request_irq(struct bcm_data *bcm) { struct bcm_device *bdev = bcm->dev; int err; mutex_lock(&bcm_device_lock); if (!bcm_device_exists(bdev)) { err = -ENODEV; goto unlock; } if (bdev->irq <= 0) { err = -EOPNOTSUPP; goto unlock; } err = devm_request_irq(bdev->dev, bdev->irq, bcm_host_wake, bdev->irq_active_low ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING, "host_wake", bdev); if (err) { bdev->irq = err; goto unlock; } device_init_wakeup(bdev->dev, true); pm_runtime_set_autosuspend_delay(bdev->dev, BCM_AUTOSUSPEND_DELAY); pm_runtime_use_autosuspend(bdev->dev); pm_runtime_set_active(bdev->dev); pm_runtime_enable(bdev->dev); unlock: mutex_unlock(&bcm_device_lock); return err; } static const struct bcm_set_sleep_mode default_sleep_params = { .sleep_mode = 1, /* 0=Disabled, 1=UART, 2=Reserved, 3=USB */ .idle_host = 2, /* idle threshold HOST, in 300ms */ .idle_dev = 2, /* idle threshold device, in 300ms */ .bt_wake_active = 1, /* BT_WAKE active mode: 1 = high, 0 = low */ .host_wake_active = 0, /* HOST_WAKE active mode: 1 = high, 0 = low */ .allow_host_sleep = 1, /* Allow host sleep in SCO flag */ .combine_modes = 1, /* Combine sleep and LPM flag */ .tristate_control = 0, /* Allow tri-state control of UART tx flag */ /* Irrelevant USB flags */ .usb_auto_sleep = 0, .usb_resume_timeout = 0, .break_to_host = 0, .pulsed_host_wake = 1, }; static int bcm_setup_sleep(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; struct sk_buff *skb; struct bcm_set_sleep_mode sleep_params = default_sleep_params; sleep_params.host_wake_active = !bcm->dev->irq_active_low; skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params), &sleep_params, HCI_INIT_TIMEOUT); if (IS_ERR(skb)) { int err = PTR_ERR(skb); bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err); return err; } kfree_skb(skb); bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded"); return 0; } #else static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; } static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; } #endif static int bcm_set_diag(struct hci_dev *hdev, bool enable) { struct hci_uart *hu = hci_get_drvdata(hdev); struct bcm_data *bcm = hu->priv; struct sk_buff *skb; if (!test_bit(HCI_RUNNING, &hdev->flags)) return -ENETDOWN; skb = bt_skb_alloc(3, GFP_KERNEL); if (!skb) return -ENOMEM; skb_put_u8(skb, BCM_LM_DIAG_PKT); skb_put_u8(skb, 0xf0); skb_put_u8(skb, enable); skb_queue_tail(&bcm->txq, skb); hci_uart_tx_wakeup(hu); return 0; } static int bcm_open(struct hci_uart *hu) { struct bcm_data *bcm; struct list_head *p; int err; bt_dev_dbg(hu->hdev, "hu %p", hu); if (!hci_uart_has_flow_control(hu)) return -EOPNOTSUPP; bcm = kzalloc(sizeof(*bcm), GFP_KERNEL); if (!bcm) return -ENOMEM; skb_queue_head_init(&bcm->txq); hu->priv = bcm; mutex_lock(&bcm_device_lock); if (hu->serdev) { bcm->dev = serdev_device_get_drvdata(hu->serdev); goto out; } if (!hu->tty->dev) goto out; list_for_each(p, &bcm_device_list) { struct bcm_device *dev = list_entry(p, struct bcm_device, list); /* Retrieve saved bcm_device based on parent of the * platform device (saved during device probe) and * parent of tty device used by hci_uart */ if (hu->tty->dev->parent == dev->dev->parent) { bcm->dev = dev; #ifdef CONFIG_PM dev->hu = hu; #endif break; } } out: if (bcm->dev) { hci_uart_set_flow_control(hu, true); hu->init_speed = bcm->dev->init_speed; hu->oper_speed = bcm->dev->oper_speed; err = bcm_gpio_set_power(bcm->dev, true); hci_uart_set_flow_control(hu, false); if (err) goto err_unset_hu; } mutex_unlock(&bcm_device_lock); return 0; err_unset_hu: #ifdef CONFIG_PM if (!hu->serdev) bcm->dev->hu = NULL; #endif mutex_unlock(&bcm_device_lock); hu->priv = NULL; kfree(bcm); return err; } static int bcm_close(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; struct bcm_device *bdev = NULL; int err; bt_dev_dbg(hu->hdev, "hu %p", hu); /* Protect bcm->dev against removal of the device or driver */ mutex_lock(&bcm_device_lock); if (hu->serdev) { bdev = serdev_device_get_drvdata(hu->serdev); } else if (bcm_device_exists(bcm->dev)) { bdev = bcm->dev; #ifdef CONFIG_PM bdev->hu = NULL; #endif } if (bdev) { if (IS_ENABLED(CONFIG_PM) && bdev->irq > 0) { devm_free_irq(bdev->dev, bdev->irq, bdev); device_init_wakeup(bdev->dev, false); pm_runtime_disable(bdev->dev); } err = bcm_gpio_set_power(bdev, false); if (err) bt_dev_err(hu->hdev, "Failed to power down"); else pm_runtime_set_suspended(bdev->dev); } mutex_unlock(&bcm_device_lock); skb_queue_purge(&bcm->txq); kfree_skb(bcm->rx_skb); kfree(bcm); hu->priv = NULL; return 0; } static int bcm_flush(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; bt_dev_dbg(hu->hdev, "hu %p", hu); skb_queue_purge(&bcm->txq); return 0; } static int bcm_setup(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; char fw_name[64]; const struct firmware *fw; unsigned int speed; int err; bt_dev_dbg(hu->hdev, "hu %p", hu); hu->hdev->set_diag = bcm_set_diag; hu->hdev->set_bdaddr = btbcm_set_bdaddr; err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name), false); if (err) return err; err = request_firmware(&fw, fw_name, &hu->hdev->dev); if (err < 0) { bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name); return 0; } err = btbcm_patchram(hu->hdev, fw); if (err) { bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err); goto finalize; } /* Init speed if any */ if (hu->init_speed) speed = hu->init_speed; else if (hu->proto->init_speed) speed = hu->proto->init_speed; else speed = 0; if (speed) host_set_baudrate(hu, speed); /* Operational speed if any */ if (hu->oper_speed) speed = hu->oper_speed; else if (hu->proto->oper_speed) speed = hu->proto->oper_speed; else speed = 0; if (speed) { err = bcm_set_baudrate(hu, speed); if (!err) host_set_baudrate(hu, speed); } finalize: release_firmware(fw); err = btbcm_finalize(hu->hdev); if (err) return err; if (!bcm_request_irq(bcm)) err = bcm_setup_sleep(hu); return err; } #define BCM_RECV_LM_DIAG \ .type = BCM_LM_DIAG_PKT, \ .hlen = BCM_LM_DIAG_SIZE, \ .loff = 0, \ .lsize = 0, \ .maxlen = BCM_LM_DIAG_SIZE #define BCM_RECV_NULL \ .type = BCM_NULL_PKT, \ .hlen = BCM_NULL_SIZE, \ .loff = 0, \ .lsize = 0, \ .maxlen = BCM_NULL_SIZE #define BCM_RECV_TYPE49 \ .type = BCM_TYPE49_PKT, \ .hlen = BCM_TYPE49_SIZE, \ .loff = 0, \ .lsize = 0, \ .maxlen = BCM_TYPE49_SIZE #define BCM_RECV_TYPE52 \ .type = BCM_TYPE52_PKT, \ .hlen = BCM_TYPE52_SIZE, \ .loff = 0, \ .lsize = 0, \ .maxlen = BCM_TYPE52_SIZE static const struct h4_recv_pkt bcm_recv_pkts[] = { { H4_RECV_ACL, .recv = hci_recv_frame }, { H4_RECV_SCO, .recv = hci_recv_frame }, { H4_RECV_EVENT, .recv = hci_recv_frame }, { BCM_RECV_LM_DIAG, .recv = hci_recv_diag }, { BCM_RECV_NULL, .recv = hci_recv_diag }, { BCM_RECV_TYPE49, .recv = hci_recv_diag }, { BCM_RECV_TYPE52, .recv = hci_recv_diag }, }; static int bcm_recv(struct hci_uart *hu, const void *data, int count) { struct bcm_data *bcm = hu->priv; if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) return -EUNATCH; bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count, bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts)); if (IS_ERR(bcm->rx_skb)) { int err = PTR_ERR(bcm->rx_skb); bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); bcm->rx_skb = NULL; return err; } else if (!bcm->rx_skb) { /* Delay auto-suspend when receiving completed packet */ mutex_lock(&bcm_device_lock); if (bcm->dev && bcm_device_exists(bcm->dev)) { pm_runtime_get(bcm->dev->dev); pm_runtime_mark_last_busy(bcm->dev->dev); pm_runtime_put_autosuspend(bcm->dev->dev); } mutex_unlock(&bcm_device_lock); } return count; } static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb) { struct bcm_data *bcm = hu->priv; bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb); /* Prepend skb with frame type */ memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); skb_queue_tail(&bcm->txq, skb); return 0; } static struct sk_buff *bcm_dequeue(struct hci_uart *hu) { struct bcm_data *bcm = hu->priv; struct sk_buff *skb = NULL; struct bcm_device *bdev = NULL; mutex_lock(&bcm_device_lock); if (bcm_device_exists(bcm->dev)) { bdev = bcm->dev; pm_runtime_get_sync(bdev->dev); /* Shall be resumed here */ } skb = skb_dequeue(&bcm->txq); if (bdev) { pm_runtime_mark_last_busy(bdev->dev); pm_runtime_put_autosuspend(bdev->dev); } mutex_unlock(&bcm_device_lock); return skb; } #ifdef CONFIG_PM static int bcm_suspend_device(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); int err; bt_dev_dbg(bdev, ""); if (!bdev->is_suspended && bdev->hu) { hci_uart_set_flow_control(bdev->hu, true); /* Once this returns, driver suspends BT via GPIO */ bdev->is_suspended = true; } /* Suspend the device */ err = bdev->set_device_wakeup(bdev, false); if (err) { if (bdev->is_suspended && bdev->hu) { bdev->is_suspended = false; hci_uart_set_flow_control(bdev->hu, false); } return -EBUSY; } bt_dev_dbg(bdev, "suspend, delaying 15 ms"); msleep(15); return 0; } static int bcm_resume_device(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); int err; bt_dev_dbg(bdev, ""); err = bdev->set_device_wakeup(bdev, true); if (err) { dev_err(dev, "Failed to power up\n"); return err; } bt_dev_dbg(bdev, "resume, delaying 15 ms"); msleep(15); /* When this executes, the device has woken up already */ if (bdev->is_suspended && bdev->hu) { bdev->is_suspended = false; hci_uart_set_flow_control(bdev->hu, false); } return 0; } #endif #ifdef CONFIG_PM_SLEEP /* suspend callback */ static int bcm_suspend(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); int error; bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended); /* * When used with a device instantiated as platform_device, bcm_suspend * can be called at any time as long as the platform device is bound, * so it should use bcm_device_lock to protect access to hci_uart * and device_wake-up GPIO. */ mutex_lock(&bcm_device_lock); if (!bdev->hu) goto unlock; if (pm_runtime_active(dev)) bcm_suspend_device(dev); if (device_may_wakeup(dev) && bdev->irq > 0) { error = enable_irq_wake(bdev->irq); if (!error) bt_dev_dbg(bdev, "BCM irq: enabled"); } unlock: mutex_unlock(&bcm_device_lock); return 0; } /* resume callback */ static int bcm_resume(struct device *dev) { struct bcm_device *bdev = dev_get_drvdata(dev); int err = 0; bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended); /* * When used with a device instantiated as platform_device, bcm_resume * can be called at any time as long as platform device is bound, * so it should use bcm_device_lock to protect access to hci_uart * and device_wake-up GPIO. */ mutex_lock(&bcm_device_lock); if (!bdev->hu) goto unlock; if (device_may_wakeup(dev) && bdev->irq > 0) { disable_irq_wake(bdev->irq); bt_dev_dbg(bdev, "BCM irq: disabled"); } err = bcm_resume_device(dev); unlock: mutex_unlock(&bcm_device_lock); if (!err) { pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); } return 0; } #endif /* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */ static const struct dmi_system_id bcm_broken_irq_dmi_table[] = { { .ident = "Meegopad T08", .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by OEM."), DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"), DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"), }, }, { } }; #ifdef CONFIG_ACPI static const struct acpi_gpio_params first_gpio = { 0, 0, false }; static const struct acpi_gpio_params second_gpio = { 1, 0, false }; static const struct acpi_gpio_params third_gpio = { 2, 0, false }; static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = { { "device-wakeup-gpios", &first_gpio, 1 }, { "shutdown-gpios", &second_gpio, 1 }, { "host-wakeup-gpios", &third_gpio, 1 }, { }, }; static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = { { "host-wakeup-gpios", &first_gpio, 1 }, { "device-wakeup-gpios", &second_gpio, 1 }, { "shutdown-gpios", &third_gpio, 1 }, { }, }; static int bcm_resource(struct acpi_resource *ares, void *data) { struct bcm_device *dev = data; struct acpi_resource_extended_irq *irq; struct acpi_resource_gpio *gpio; struct acpi_resource_uart_serialbus *sb; switch (ares->type) { case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: irq = &ares->data.extended_irq; if (irq->polarity != ACPI_ACTIVE_LOW) dev_info(dev->dev, "ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low\n"); dev->irq_active_low = true; break; case ACPI_RESOURCE_TYPE_GPIO: gpio = &ares->data.gpio; if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) { dev->gpio_int_idx = dev->gpio_count; dev->irq_active_low = gpio->polarity == ACPI_ACTIVE_LOW; } dev->gpio_count++; break; case ACPI_RESOURCE_TYPE_SERIAL_BUS: sb = &ares->data.uart_serial_bus; if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) { dev->init_speed = sb->default_baud_rate; dev->oper_speed = 4000000; } break; default: break; } return 0; } static int bcm_apple_set_device_wakeup(struct bcm_device *dev, bool awake) { if (ACPI_FAILURE(acpi_execute_simple_method(dev->btlp, NULL, !awake))) return -EIO; return 0; } static int bcm_apple_set_shutdown(struct bcm_device *dev, bool powered) { if (ACPI_FAILURE(acpi_evaluate_object(powered ? dev->btpu : dev->btpd, NULL, NULL, NULL))) return -EIO; return 0; } static int bcm_apple_get_resources(struct bcm_device *dev) { struct acpi_device *adev = ACPI_COMPANION(dev->dev); const union acpi_object *obj; if (!adev || ACPI_FAILURE(acpi_get_handle(adev->handle, "BTLP", &dev->btlp)) || ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPU", &dev->btpu)) || ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPD", &dev->btpd))) return -ENODEV; if (!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, &obj) && obj->buffer.length == 8) dev->init_speed = *(u64 *)obj->buffer.pointer; dev->set_device_wakeup = bcm_apple_set_device_wakeup; dev->set_shutdown = bcm_apple_set_shutdown; return 0; } #else static inline int bcm_apple_get_resources(struct bcm_device *dev) { return -EOPNOTSUPP; } #endif /* CONFIG_ACPI */ static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake) { gpiod_set_value_cansleep(dev->device_wakeup, awake); return 0; } static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered) { gpiod_set_value_cansleep(dev->shutdown, powered); return 0; } /* Try a bunch of names for TXCO */ static struct clk *bcm_get_txco(struct device *dev) { struct clk *clk; /* New explicit name */ clk = devm_clk_get(dev, "txco"); if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER) return clk; /* Deprecated name */ clk = devm_clk_get(dev, "extclk"); if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER) return clk; /* Original code used no name at all */ return devm_clk_get(dev, NULL); } static int bcm_get_resources(struct bcm_device *dev) { const struct dmi_system_id *dmi_id; int err; dev->name = dev_name(dev->dev); if (x86_apple_machine && !bcm_apple_get_resources(dev)) return 0; dev->txco_clk = bcm_get_txco(dev->dev); /* Handle deferred probing */ if (dev->txco_clk == ERR_PTR(-EPROBE_DEFER)) return PTR_ERR(dev->txco_clk); /* Ignore all other errors as before */ if (IS_ERR(dev->txco_clk)) dev->txco_clk = NULL; dev->lpo_clk = devm_clk_get(dev->dev, "lpo"); if (dev->lpo_clk == ERR_PTR(-EPROBE_DEFER)) return PTR_ERR(dev->lpo_clk); if (IS_ERR(dev->lpo_clk)) dev->lpo_clk = NULL; /* Check if we accidentally fetched the lpo clock twice */ if (dev->lpo_clk && clk_is_match(dev->lpo_clk, dev->txco_clk)) { devm_clk_put(dev->dev, dev->txco_clk); dev->txco_clk = NULL; } dev->device_wakeup = devm_gpiod_get_optional(dev->dev, "device-wakeup", GPIOD_OUT_LOW); if (IS_ERR(dev->device_wakeup)) return PTR_ERR(dev->device_wakeup); dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown", GPIOD_OUT_LOW); if (IS_ERR(dev->shutdown)) return PTR_ERR(dev->shutdown); dev->set_device_wakeup = bcm_gpio_set_device_wakeup; dev->set_shutdown = bcm_gpio_set_shutdown; dev->supplies[0].supply = "vbat"; dev->supplies[1].supply = "vddio"; err = devm_regulator_bulk_get(dev->dev, BCM_NUM_SUPPLIES, dev->supplies); if (err) return err; /* IRQ can be declared in ACPI table as Interrupt or GpioInt */ if (dev->irq <= 0) { struct gpio_desc *gpio; gpio = devm_gpiod_get_optional(dev->dev, "host-wakeup", GPIOD_IN); if (IS_ERR(gpio)) return PTR_ERR(gpio); dev->irq = gpiod_to_irq(gpio); } dmi_id = dmi_first_match(bcm_broken_irq_dmi_table); if (dmi_id) { dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n", dmi_id->ident); dev->irq = 0; } dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq); return 0; } #ifdef CONFIG_ACPI static int bcm_acpi_probe(struct bcm_device *dev) { LIST_HEAD(resources); const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios; struct resource_entry *entry; int ret; /* Retrieve UART ACPI info */ dev->gpio_int_idx = -1; ret = acpi_dev_get_resources(ACPI_COMPANION(dev->dev), &resources, bcm_resource, dev); if (ret < 0) return ret; resource_list_for_each_entry(entry, &resources) { if (resource_type(entry->res) == IORESOURCE_IRQ) { dev->irq = entry->res->start; break; } } acpi_dev_free_resource_list(&resources); /* If the DSDT uses an Interrupt resource for the IRQ, then there are * only 2 GPIO resources, we use the irq-last mapping for this, since * we already have an irq the 3th / last mapping will not be used. */ if (dev->irq) gpio_mapping = acpi_bcm_int_last_gpios; else if (dev->gpio_int_idx == 0) gpio_mapping = acpi_bcm_int_first_gpios; else if (dev->gpio_int_idx == 2) gpio_mapping = acpi_bcm_int_last_gpios; else dev_warn(dev->dev, "Unexpected ACPI gpio_int_idx: %d\n", dev->gpio_int_idx); /* Warn if our expectations are not met. */ if (dev->gpio_count != (dev->irq ? 2 : 3)) dev_warn(dev->dev, "Unexpected number of ACPI GPIOs: %d\n", dev->gpio_count); ret = devm_acpi_dev_add_driver_gpios(dev->dev, gpio_mapping); if (ret) return ret; if (irq_polarity != -1) { dev->irq_active_low = irq_polarity; dev_warn(dev->dev, "Overwriting IRQ polarity to active %s by module-param\n", dev->irq_active_low ? "low" : "high"); } return 0; } #else static int bcm_acpi_probe(struct bcm_device *dev) { return -EINVAL; } #endif /* CONFIG_ACPI */ static int bcm_of_probe(struct bcm_device *bdev) { device_property_read_u32(bdev->dev, "max-speed", &bdev->oper_speed); return 0; } static int bcm_probe(struct platform_device *pdev) { struct bcm_device *dev; int ret; dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); if (!dev) return -ENOMEM; dev->dev = &pdev->dev; dev->irq = platform_get_irq(pdev, 0); if (has_acpi_companion(&pdev->dev)) { ret = bcm_acpi_probe(dev); if (ret) return ret; } ret = bcm_get_resources(dev); if (ret) return ret; platform_set_drvdata(pdev, dev); dev_info(&pdev->dev, "%s device registered.\n", dev->name); /* Place this instance on the device list */ mutex_lock(&bcm_device_lock); list_add_tail(&dev->list, &bcm_device_list); mutex_unlock(&bcm_device_lock); ret = bcm_gpio_set_power(dev, false); if (ret) dev_err(&pdev->dev, "Failed to power down\n"); return 0; } static int bcm_remove(struct platform_device *pdev) { struct bcm_device *dev = platform_get_drvdata(pdev); mutex_lock(&bcm_device_lock); list_del(&dev->list); mutex_unlock(&bcm_device_lock); dev_info(&pdev->dev, "%s device unregistered.\n", dev->name); return 0; } static const struct hci_uart_proto bcm_proto = { .id = HCI_UART_BCM, .name = "Broadcom", .manufacturer = 15, .init_speed = 115200, .open = bcm_open, .close = bcm_close, .flush = bcm_flush, .setup = bcm_setup, .set_baudrate = bcm_set_baudrate, .recv = bcm_recv, .enqueue = bcm_enqueue, .dequeue = bcm_dequeue, }; #ifdef CONFIG_ACPI static const struct acpi_device_id bcm_acpi_match[] = { { "BCM2E00" }, { "BCM2E01" }, { "BCM2E02" }, { "BCM2E03" }, { "BCM2E04" }, { "BCM2E05" }, { "BCM2E06" }, { "BCM2E07" }, { "BCM2E08" }, { "BCM2E09" }, { "BCM2E0A" }, { "BCM2E0B" }, { "BCM2E0C" }, { "BCM2E0D" }, { "BCM2E0E" }, { "BCM2E0F" }, { "BCM2E10" }, { "BCM2E11" }, { "BCM2E12" }, { "BCM2E13" }, { "BCM2E14" }, { "BCM2E15" }, { "BCM2E16" }, { "BCM2E17" }, { "BCM2E18" }, { "BCM2E19" }, { "BCM2E1A" }, { "BCM2E1B" }, { "BCM2E1C" }, { "BCM2E1D" }, { "BCM2E1F" }, { "BCM2E20" }, { "BCM2E21" }, { "BCM2E22" }, { "BCM2E23" }, { "BCM2E24" }, { "BCM2E25" }, { "BCM2E26" }, { "BCM2E27" }, { "BCM2E28" }, { "BCM2E29" }, { "BCM2E2A" }, { "BCM2E2B" }, { "BCM2E2C" }, { "BCM2E2D" }, { "BCM2E2E" }, { "BCM2E2F" }, { "BCM2E30" }, { "BCM2E31" }, { "BCM2E32" }, { "BCM2E33" }, { "BCM2E34" }, { "BCM2E35" }, { "BCM2E36" }, { "BCM2E37" }, { "BCM2E38" }, { "BCM2E39" }, { "BCM2E3A" }, { "BCM2E3B" }, { "BCM2E3C" }, { "BCM2E3D" }, { "BCM2E3E" }, { "BCM2E3F" }, { "BCM2E40" }, { "BCM2E41" }, { "BCM2E42" }, { "BCM2E43" }, { "BCM2E44" }, { "BCM2E45" }, { "BCM2E46" }, { "BCM2E47" }, { "BCM2E48" }, { "BCM2E49" }, { "BCM2E4A" }, { "BCM2E4B" }, { "BCM2E4C" }, { "BCM2E4D" }, { "BCM2E4E" }, { "BCM2E4F" }, { "BCM2E50" }, { "BCM2E51" }, { "BCM2E52" }, { "BCM2E53" }, { "BCM2E54" }, { "BCM2E55" }, { "BCM2E56" }, { "BCM2E57" }, { "BCM2E58" }, { "BCM2E59" }, { "BCM2E5A" }, { "BCM2E5B" }, { "BCM2E5C" }, { "BCM2E5D" }, { "BCM2E5E" }, { "BCM2E5F" }, { "BCM2E60" }, { "BCM2E61" }, { "BCM2E62" }, { "BCM2E63" }, { "BCM2E64" }, { "BCM2E65" }, { "BCM2E66" }, { "BCM2E67" }, { "BCM2E68" }, { "BCM2E69" }, { "BCM2E6B" }, { "BCM2E6D" }, { "BCM2E6E" }, { "BCM2E6F" }, { "BCM2E70" }, { "BCM2E71" }, { "BCM2E72" }, { "BCM2E73" }, { "BCM2E74" }, { "BCM2E75" }, { "BCM2E76" }, { "BCM2E77" }, { "BCM2E78" }, { "BCM2E79" }, { "BCM2E7A" }, { "BCM2E7B" }, { "BCM2E7C" }, { "BCM2E7D" }, { "BCM2E7E" }, { "BCM2E7F" }, { "BCM2E80" }, { "BCM2E81" }, { "BCM2E82" }, { "BCM2E83" }, { "BCM2E84" }, { "BCM2E85" }, { "BCM2E86" }, { "BCM2E87" }, { "BCM2E88" }, { "BCM2E89" }, { "BCM2E8A" }, { "BCM2E8B" }, { "BCM2E8C" }, { "BCM2E8D" }, { "BCM2E8E" }, { "BCM2E90" }, { "BCM2E92" }, { "BCM2E93" }, { "BCM2E94" }, { "BCM2E95" }, { "BCM2E96" }, { "BCM2E97" }, { "BCM2E98" }, { "BCM2E99" }, { "BCM2E9A" }, { "BCM2E9B" }, { "BCM2E9C" }, { "BCM2E9D" }, { "BCM2EA0" }, { "BCM2EA1" }, { "BCM2EA2" }, { "BCM2EA3" }, { "BCM2EA4" }, { "BCM2EA5" }, { "BCM2EA6" }, { "BCM2EA7" }, { "BCM2EA8" }, { "BCM2EA9" }, { "BCM2EAA" }, { "BCM2EAB" }, { "BCM2EAC" }, { }, }; MODULE_DEVICE_TABLE(acpi, bcm_acpi_match); #endif /* suspend and resume callbacks */ static const struct dev_pm_ops bcm_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume) SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL) }; static struct platform_driver bcm_driver = { .probe = bcm_probe, .remove = bcm_remove, .driver = { .name = "hci_bcm", .acpi_match_table = ACPI_PTR(bcm_acpi_match), .pm = &bcm_pm_ops, }, }; static int bcm_serdev_probe(struct serdev_device *serdev) { struct bcm_device *bcmdev; int err; bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL); if (!bcmdev) return -ENOMEM; bcmdev->dev = &serdev->dev; #ifdef CONFIG_PM bcmdev->hu = &bcmdev->serdev_hu; #endif bcmdev->serdev_hu.serdev = serdev; serdev_device_set_drvdata(serdev, bcmdev); if (has_acpi_companion(&serdev->dev)) err = bcm_acpi_probe(bcmdev); else err = bcm_of_probe(bcmdev); if (err) return err; err = bcm_get_resources(bcmdev); if (err) return err; if (!bcmdev->shutdown) { dev_warn(&serdev->dev, "No reset resource, using default baud rate\n"); bcmdev->oper_speed = bcmdev->init_speed; } err = bcm_gpio_set_power(bcmdev, false); if (err) dev_err(&serdev->dev, "Failed to power down\n"); return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto); } static void bcm_serdev_remove(struct serdev_device *serdev) { struct bcm_device *bcmdev = serdev_device_get_drvdata(serdev); hci_uart_unregister_device(&bcmdev->serdev_hu); } #ifdef CONFIG_OF static const struct of_device_id bcm_bluetooth_of_match[] = { { .compatible = "brcm,bcm20702a1" }, { .compatible = "brcm,bcm4345c5" }, { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, { .compatible = "brcm,bcm43540-bt" }, { .compatible = "brcm,bcm4335a0" }, { }, }; MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match); #endif static struct serdev_device_driver bcm_serdev_driver = { .probe = bcm_serdev_probe, .remove = bcm_serdev_remove, .driver = { .name = "hci_uart_bcm", .of_match_table = of_match_ptr(bcm_bluetooth_of_match), .acpi_match_table = ACPI_PTR(bcm_acpi_match), .pm = &bcm_pm_ops, }, }; int __init bcm_init(void) { /* For now, we need to keep both platform device * driver (ACPI generated) and serdev driver (DT). */ platform_driver_register(&bcm_driver); serdev_device_driver_register(&bcm_serdev_driver); return hci_uart_register_proto(&bcm_proto); } int __exit bcm_deinit(void) { platform_driver_unregister(&bcm_driver); serdev_device_driver_unregister(&bcm_serdev_driver); return hci_uart_unregister_proto(&bcm_proto); }