/* generic HDLC line discipline for Linux * * Written by Paul Fulghum paulkf@microgate.com * for Microgate Corporation * * Microgate and SyncLink are registered trademarks of Microgate Corporation * * Adapted from ppp.c, written by Michael Callahan , * Al Longyear , * Paul Mackerras * * Original release 01/11/99 * * This code is released under the GNU General Public License (GPL) * * This module implements the tty line discipline N_HDLC for use with * tty device drivers that support bit-synchronous HDLC communications. * * All HDLC data is frame oriented which means: * * 1. tty write calls represent one complete transmit frame of data * The device driver should accept the complete frame or none of * the frame (busy) in the write method. Each write call should have * a byte count in the range of 2-65535 bytes (2 is min HDLC frame * with 1 addr byte and 1 ctrl byte). The max byte count of 65535 * should include any crc bytes required. For example, when using * CCITT CRC32, 4 crc bytes are required, so the maximum size frame * the application may transmit is limited to 65531 bytes. For CCITT * CRC16, the maximum application frame size would be 65533. * * * 2. receive callbacks from the device driver represents * one received frame. The device driver should bypass * the tty flip buffer and call the line discipline receive * callback directly to avoid fragmenting or concatenating * multiple frames into a single receive callback. * * The HDLC line discipline queues the receive frames in separate * buffers so complete receive frames can be returned by the * tty read calls. * * 3. tty read calls returns an entire frame of data or nothing. * * 4. all send and receive data is considered raw. No processing * or translation is performed by the line discipline, regardless * of the tty flags * * 5. When line discipline is queried for the amount of receive * data available (FIOC), 0 is returned if no data available, * otherwise the count of the next available frame is returned. * (instead of the sum of all received frame counts). * * These conventions allow the standard tty programming interface * to be used for synchronous HDLC applications when used with * this line discipline (or another line discipline that is frame * oriented such as N_PPP). * * The SyncLink driver (synclink.c) implements both asynchronous * (using standard line discipline N_TTY) and synchronous HDLC * (using N_HDLC) communications, with the latter using the above * conventions. * * This implementation is very basic and does not maintain * any statistics. The main point is to enforce the raw data * and frame orientation of HDLC communications. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. */ #define HDLC_MAGIC 0x239e #include #include #include #include #include #include #include #include #undef VERSION #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch)) #include #include #include #include #include #include #include #include /* used in new tty drivers */ #include /* used in new tty drivers */ #include #include #include #include #include /* * Buffers for individual HDLC frames */ #define MAX_HDLC_FRAME_SIZE 65535 #define DEFAULT_RX_BUF_COUNT 10 #define MAX_RX_BUF_COUNT 60 #define DEFAULT_TX_BUF_COUNT 3 struct n_hdlc_buf { struct n_hdlc_buf *link; int count; char buf[1]; }; #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe) struct n_hdlc_buf_list { struct n_hdlc_buf *head; struct n_hdlc_buf *tail; int count; spinlock_t spinlock; }; /** * struct n_hdlc - per device instance data structure * @magic - magic value for structure * @flags - miscellaneous control flags * @tty - ptr to TTY structure * @backup_tty - TTY to use if tty gets closed * @tbusy - reentrancy flag for tx wakeup code * @woke_up - FIXME: describe this field * @tbuf - currently transmitting tx buffer * @tx_buf_list - list of pending transmit frame buffers * @rx_buf_list - list of received frame buffers * @tx_free_buf_list - list unused transmit frame buffers * @rx_free_buf_list - list unused received frame buffers */ struct n_hdlc { int magic; __u32 flags; struct tty_struct *tty; struct tty_struct *backup_tty; int tbusy; int woke_up; struct n_hdlc_buf *tbuf; struct n_hdlc_buf_list tx_buf_list; struct n_hdlc_buf_list rx_buf_list; struct n_hdlc_buf_list tx_free_buf_list; struct n_hdlc_buf_list rx_free_buf_list; }; /* * HDLC buffer list manipulation functions */ static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list); static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, struct n_hdlc_buf *buf); static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list); /* Local functions */ static struct n_hdlc *n_hdlc_alloc (void); /* debug level can be set by insmod for debugging purposes */ #define DEBUG_LEVEL_INFO 1 static int debuglevel; /* max frame size for memory allocations */ static int maxframe = 4096; /* TTY callbacks */ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, __u8 __user *buf, size_t nr); static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *buf, size_t nr); static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait); static int n_hdlc_tty_open(struct tty_struct *tty); static void n_hdlc_tty_close(struct tty_struct *tty); static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp, char *fp, int count); static void n_hdlc_tty_wakeup(struct tty_struct *tty); #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f))) #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data)) #define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty) static void flush_rx_queue(struct tty_struct *tty) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); struct n_hdlc_buf *buf; while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list))) n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf); } static void flush_tx_queue(struct tty_struct *tty) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); struct n_hdlc_buf *buf; unsigned long flags; while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list))) n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf); spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); if (n_hdlc->tbuf) { n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf); n_hdlc->tbuf = NULL; } spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); } static struct tty_ldisc_ops n_hdlc_ldisc = { .owner = THIS_MODULE, .magic = TTY_LDISC_MAGIC, .name = "hdlc", .open = n_hdlc_tty_open, .close = n_hdlc_tty_close, .read = n_hdlc_tty_read, .write = n_hdlc_tty_write, .ioctl = n_hdlc_tty_ioctl, .poll = n_hdlc_tty_poll, .receive_buf = n_hdlc_tty_receive, .write_wakeup = n_hdlc_tty_wakeup, .flush_buffer = flush_rx_queue, }; /** * n_hdlc_release - release an n_hdlc per device line discipline info structure * @n_hdlc - per device line discipline info structure */ static void n_hdlc_release(struct n_hdlc *n_hdlc) { struct tty_struct *tty = n_hdlc2tty (n_hdlc); struct n_hdlc_buf *buf; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__); /* Ensure that the n_hdlcd process is not hanging on select()/poll() */ wake_up_interruptible (&tty->read_wait); wake_up_interruptible (&tty->write_wait); if (tty->disc_data == n_hdlc) tty->disc_data = NULL; /* Break the tty->n_hdlc link */ /* Release transmit and receive buffers */ for(;;) { buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); if (buf) { kfree(buf); } else break; } for(;;) { buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list); if (buf) { kfree(buf); } else break; } for(;;) { buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); if (buf) { kfree(buf); } else break; } for(;;) { buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); if (buf) { kfree(buf); } else break; } kfree(n_hdlc->tbuf); kfree(n_hdlc); } /* end of n_hdlc_release() */ /** * n_hdlc_tty_close - line discipline close * @tty - pointer to tty info structure * * Called when the line discipline is changed to something * else, the tty is closed, or the tty detects a hangup. */ static void n_hdlc_tty_close(struct tty_struct *tty) { struct n_hdlc *n_hdlc = tty2n_hdlc (tty); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__); if (n_hdlc != NULL) { if (n_hdlc->magic != HDLC_MAGIC) { printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n"); return; } #if defined(TTY_NO_WRITE_SPLIT) clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags); #endif tty->disc_data = NULL; if (tty == n_hdlc->backup_tty) n_hdlc->backup_tty = NULL; if (tty != n_hdlc->tty) return; if (n_hdlc->backup_tty) { n_hdlc->tty = n_hdlc->backup_tty; } else { n_hdlc_release (n_hdlc); } } if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__); } /* end of n_hdlc_tty_close() */ /** * n_hdlc_tty_open - called when line discipline changed to n_hdlc * @tty - pointer to tty info structure * * Returns 0 if success, otherwise error code */ static int n_hdlc_tty_open (struct tty_struct *tty) { struct n_hdlc *n_hdlc = tty2n_hdlc (tty); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n", __FILE__,__LINE__, tty->name); /* There should not be an existing table for this slot. */ if (n_hdlc) { printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" ); return -EEXIST; } n_hdlc = n_hdlc_alloc(); if (!n_hdlc) { printk (KERN_ERR "n_hdlc_alloc failed\n"); return -ENFILE; } tty->disc_data = n_hdlc; n_hdlc->tty = tty; tty->receive_room = 65536; #if defined(TTY_NO_WRITE_SPLIT) /* change tty_io write() to not split large writes into 8K chunks */ set_bit(TTY_NO_WRITE_SPLIT,&tty->flags); #endif /* flush receive data from driver */ tty_driver_flush_buffer(tty); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__); return 0; } /* end of n_tty_hdlc_open() */ /** * n_hdlc_send_frames - send frames on pending send buffer list * @n_hdlc - pointer to ldisc instance data * @tty - pointer to tty instance data * * Send frames on pending send buffer list until the driver does not accept a * frame (busy) this function is called after adding a frame to the send buffer * list and by the tty wakeup callback. */ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) { register int actual; unsigned long flags; struct n_hdlc_buf *tbuf; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__); check_again: spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); if (n_hdlc->tbusy) { n_hdlc->woke_up = 1; spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); return; } n_hdlc->tbusy = 1; n_hdlc->woke_up = 0; spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); /* get current transmit buffer or get new transmit */ /* buffer from list of pending transmit buffers */ tbuf = n_hdlc->tbuf; if (!tbuf) tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); while (tbuf) { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)sending frame %p, count=%d\n", __FILE__,__LINE__,tbuf,tbuf->count); /* Send the next block of data to device */ tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); actual = tty->ops->write(tty, tbuf->buf, tbuf->count); /* rollback was possible and has been done */ if (actual == -ERESTARTSYS) { n_hdlc->tbuf = tbuf; break; } /* if transmit error, throw frame away by */ /* pretending it was accepted by driver */ if (actual < 0) actual = tbuf->count; if (actual == tbuf->count) { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)frame %p completed\n", __FILE__,__LINE__,tbuf); /* free current transmit buffer */ n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf); /* this tx buffer is done */ n_hdlc->tbuf = NULL; /* wait up sleeping writers */ wake_up_interruptible(&tty->write_wait); /* get next pending transmit buffer */ tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list); } else { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)frame %p pending\n", __FILE__,__LINE__,tbuf); /* buffer not accepted by driver */ /* set this buffer as pending buffer */ n_hdlc->tbuf = tbuf; break; } } if (!tbuf) tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); /* Clear the re-entry flag */ spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); n_hdlc->tbusy = 0; spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags); if (n_hdlc->woke_up) goto check_again; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__); } /* end of n_hdlc_send_frames() */ /** * n_hdlc_tty_wakeup - Callback for transmit wakeup * @tty - pointer to associated tty instance data * * Called when low level device driver can accept more send data. */ static void n_hdlc_tty_wakeup(struct tty_struct *tty) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__); if (!n_hdlc) return; if (tty != n_hdlc->tty) { tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); return; } n_hdlc_send_frames (n_hdlc, tty); } /* end of n_hdlc_tty_wakeup() */ /** * n_hdlc_tty_receive - Called by tty driver when receive data is available * @tty - pointer to tty instance data * @data - pointer to received data * @flags - pointer to flags for data * @count - count of received data in bytes * * Called by tty low level driver when receive data is available. Data is * interpreted as one HDLC frame. */ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count) { register struct n_hdlc *n_hdlc = tty2n_hdlc (tty); register struct n_hdlc_buf *buf; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_receive() called count=%d\n", __FILE__,__LINE__, count); /* This can happen if stuff comes in on the backup tty */ if (!n_hdlc || tty != n_hdlc->tty) return; /* verify line is using HDLC discipline */ if (n_hdlc->magic != HDLC_MAGIC) { printk("%s(%d) line not using HDLC discipline\n", __FILE__,__LINE__); return; } if ( count>maxframe ) { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d) rx count>maxframesize, data discarded\n", __FILE__,__LINE__); return; } /* get a free HDLC buffer */ buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list); if (!buf) { /* no buffers in free list, attempt to allocate another rx buffer */ /* unless the maximum count has been reached */ if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT) buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC); } if (!buf) { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d) no more rx buffers, data discarded\n", __FILE__,__LINE__); return; } /* copy received data to HDLC buffer */ memcpy(buf->buf,data,count); buf->count=count; /* add HDLC buffer to list of received frames */ n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf); /* wake up any blocked reads and perform async signalling */ wake_up_interruptible (&tty->read_wait); if (n_hdlc->tty->fasync != NULL) kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN); } /* end of n_hdlc_tty_receive() */ /** * n_hdlc_tty_read - Called to retrieve one frame of data (if available) * @tty - pointer to tty instance data * @file - pointer to open file object * @buf - pointer to returned data buffer * @nr - size of returned data buffer * * Returns the number of bytes returned or error code. */ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file, __u8 __user *buf, size_t nr) { struct n_hdlc *n_hdlc = tty2n_hdlc(tty); int ret; struct n_hdlc_buf *rbuf; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__); /* Validate the pointers */ if (!n_hdlc) return -EIO; /* verify user access to buffer */ if (!access_ok(VERIFY_WRITE, buf, nr)) { printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user " "buffer\n", __FILE__, __LINE__); return -EFAULT; } tty_lock(); for (;;) { if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) { tty_unlock(); return -EIO; } n_hdlc = tty2n_hdlc (tty); if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || tty != n_hdlc->tty) { tty_unlock(); return 0; } rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list); if (rbuf) break; /* no data */ if (file->f_flags & O_NONBLOCK) { tty_unlock(); return -EAGAIN; } interruptible_sleep_on (&tty->read_wait); if (signal_pending(current)) { tty_unlock(); return -EINTR; } } if (rbuf->count > nr) /* frame too large for caller's buffer (discard frame) */ ret = -EOVERFLOW; else { /* Copy the data to the caller's buffer */ if (copy_to_user(buf, rbuf->buf, rbuf->count)) ret = -EFAULT; else ret = rbuf->count; } /* return HDLC buffer to free list unless the free list */ /* count has exceeded the default value, in which case the */ /* buffer is freed back to the OS to conserve memory */ if (n_hdlc->rx_free_buf_list.count > DEFAULT_RX_BUF_COUNT) kfree(rbuf); else n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,rbuf); tty_unlock(); return ret; } /* end of n_hdlc_tty_read() */ /** * n_hdlc_tty_write - write a single frame of data to device * @tty - pointer to associated tty device instance data * @file - pointer to file object data * @data - pointer to transmit data (one frame) * @count - size of transmit frame in bytes * * Returns the number of bytes written (or error code). */ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count) { struct n_hdlc *n_hdlc = tty2n_hdlc (tty); int error = 0; DECLARE_WAITQUEUE(wait, current); struct n_hdlc_buf *tbuf; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n", __FILE__,__LINE__,count); /* Verify pointers */ if (!n_hdlc) return -EIO; if (n_hdlc->magic != HDLC_MAGIC) return -EIO; /* verify frame size */ if (count > maxframe ) { if (debuglevel & DEBUG_LEVEL_INFO) printk (KERN_WARNING "n_hdlc_tty_write: truncating user packet " "from %lu to %d\n", (unsigned long) count, maxframe ); count = maxframe; } tty_lock(); add_wait_queue(&tty->write_wait, &wait); set_current_state(TASK_INTERRUPTIBLE); /* Allocate transmit buffer */ /* sleep until transmit buffer available */ while (!(tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list))) { if (file->f_flags & O_NONBLOCK) { error = -EAGAIN; break; } schedule(); n_hdlc = tty2n_hdlc (tty); if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC || tty != n_hdlc->tty) { printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc); error = -EIO; break; } if (signal_pending(current)) { error = -EINTR; break; } } set_current_state(TASK_RUNNING); remove_wait_queue(&tty->write_wait, &wait); if (!error) { /* Retrieve the user's buffer */ memcpy(tbuf->buf, data, count); /* Send the data */ tbuf->count = error = count; n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf); n_hdlc_send_frames(n_hdlc,tty); } tty_unlock(); return error; } /* end of n_hdlc_tty_write() */ /** * n_hdlc_tty_ioctl - process IOCTL system call for the tty device. * @tty - pointer to tty instance data * @file - pointer to open file object for device * @cmd - IOCTL command code * @arg - argument for IOCTL call (cmd dependent) * * Returns command dependent result. */ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct n_hdlc *n_hdlc = tty2n_hdlc (tty); int error = 0; int count; unsigned long flags; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_ioctl() called %d\n", __FILE__,__LINE__,cmd); /* Verify the status of the device */ if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC) return -EBADF; switch (cmd) { case FIONREAD: /* report count of read data available */ /* in next available frame (if any) */ spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags); if (n_hdlc->rx_buf_list.head) count = n_hdlc->rx_buf_list.head->count; else count = 0; spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags); error = put_user(count, (int __user *)arg); break; case TIOCOUTQ: /* get the pending tx byte count in the driver */ count = tty_chars_in_buffer(tty); /* add size of next output frame in queue */ spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags); if (n_hdlc->tx_buf_list.head) count += n_hdlc->tx_buf_list.head->count; spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags); error = put_user(count, (int __user *)arg); break; case TCFLSH: switch (arg) { case TCIOFLUSH: case TCOFLUSH: flush_tx_queue(tty); } /* fall through to default */ default: error = n_tty_ioctl_helper(tty, file, cmd, arg); break; } return error; } /* end of n_hdlc_tty_ioctl() */ /** * n_hdlc_tty_poll - TTY callback for poll system call * @tty - pointer to tty instance data * @filp - pointer to open file object for device * @poll_table - wait queue for operations * * Determine which operations (read/write) will not block and return info * to caller. * Returns a bit mask containing info on which ops will not block. */ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait) { struct n_hdlc *n_hdlc = tty2n_hdlc (tty); unsigned int mask = 0; if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__); if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) { /* queue current process into any wait queue that */ /* may awaken in the future (read and write) */ poll_wait(filp, &tty->read_wait, wait); poll_wait(filp, &tty->write_wait, wait); /* set bits for operations that won't block */ if (n_hdlc->rx_buf_list.head) mask |= POLLIN | POLLRDNORM; /* readable */ if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) mask |= POLLHUP; if (tty_hung_up_p(filp)) mask |= POLLHUP; if (!tty_is_writelocked(tty) && n_hdlc->tx_free_buf_list.head) mask |= POLLOUT | POLLWRNORM; /* writable */ } return mask; } /* end of n_hdlc_tty_poll() */ /** * n_hdlc_alloc - allocate an n_hdlc instance data structure * * Returns a pointer to newly created structure if success, otherwise %NULL */ static struct n_hdlc *n_hdlc_alloc(void) { struct n_hdlc_buf *buf; int i; struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL); if (!n_hdlc) return NULL; memset(n_hdlc, 0, sizeof(*n_hdlc)); n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list); n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list); n_hdlc_buf_list_init(&n_hdlc->rx_buf_list); n_hdlc_buf_list_init(&n_hdlc->tx_buf_list); /* allocate free rx buffer list */ for(i=0;irx_free_buf_list,buf); else if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i); } /* allocate free tx buffer list */ for(i=0;itx_free_buf_list,buf); else if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i); } /* Initialize the control block */ n_hdlc->magic = HDLC_MAGIC; n_hdlc->flags = 0; return n_hdlc; } /* end of n_hdlc_alloc() */ /** * n_hdlc_buf_list_init - initialize specified HDLC buffer list * @list - pointer to buffer list */ static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list) { memset(list, 0, sizeof(*list)); spin_lock_init(&list->spinlock); } /* end of n_hdlc_buf_list_init() */ /** * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list * @list - pointer to buffer list * @buf - pointer to buffer */ static void n_hdlc_buf_put(struct n_hdlc_buf_list *list, struct n_hdlc_buf *buf) { unsigned long flags; spin_lock_irqsave(&list->spinlock,flags); buf->link=NULL; if (list->tail) list->tail->link = buf; else list->head = buf; list->tail = buf; (list->count)++; spin_unlock_irqrestore(&list->spinlock,flags); } /* end of n_hdlc_buf_put() */ /** * n_hdlc_buf_get - remove and return an HDLC buffer from list * @list - pointer to HDLC buffer list * * Remove and return an HDLC buffer from the head of the specified HDLC buffer * list. * Returns a pointer to HDLC buffer if available, otherwise %NULL. */ static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list) { unsigned long flags; struct n_hdlc_buf *buf; spin_lock_irqsave(&list->spinlock,flags); buf = list->head; if (buf) { list->head = buf->link; (list->count)--; } if (!list->head) list->tail = NULL; spin_unlock_irqrestore(&list->spinlock,flags); return buf; } /* end of n_hdlc_buf_get() */ static char hdlc_banner[] __initdata = KERN_INFO "HDLC line discipline maxframe=%u\n"; static char hdlc_register_ok[] __initdata = KERN_INFO "N_HDLC line discipline registered.\n"; static char hdlc_register_fail[] __initdata = KERN_ERR "error registering line discipline: %d\n"; static char hdlc_init_fail[] __initdata = KERN_INFO "N_HDLC: init failure %d\n"; static int __init n_hdlc_init(void) { int status; /* range check maxframe arg */ if (maxframe < 4096) maxframe = 4096; else if (maxframe > 65535) maxframe = 65535; printk(hdlc_banner, maxframe); status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc); if (!status) printk(hdlc_register_ok); else printk(hdlc_register_fail, status); if (status) printk(hdlc_init_fail, status); return status; } /* end of init_module() */ static char hdlc_unregister_ok[] __exitdata = KERN_INFO "N_HDLC: line discipline unregistered\n"; static char hdlc_unregister_fail[] __exitdata = KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n"; static void __exit n_hdlc_exit(void) { /* Release tty registration of line discipline */ int status = tty_unregister_ldisc(N_HDLC); if (status) printk(hdlc_unregister_fail, status); else printk(hdlc_unregister_ok); } module_init(n_hdlc_init); module_exit(n_hdlc_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com"); module_param(debuglevel, int, 0); module_param(maxframe, int, 0); MODULE_ALIAS_LDISC(N_HDLC);