// SPDX-License-Identifier: GPL-2.0-only /** * timer-ti-32k.c - OMAP2 32k Timer Support * * Copyright (C) 2009 Nokia Corporation * * Update to use new clocksource/clockevent layers * Author: Kevin Hilman, MontaVista Software, Inc. * Copyright (C) 2007 MontaVista Software, Inc. * * Original driver: * Copyright (C) 2005 Nokia Corporation * Author: Paul Mundt * Juha Yrjölä * OMAP Dual-mode timer framework support by Timo Teras * * Some parts based off of TI's 24xx code: * * Copyright (C) 2004-2009 Texas Instruments, Inc. * * Roughly modelled after the OMAP1 MPU timer code. * Added OMAP4 support - Santosh Shilimkar * * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com */ #include #include #include #include #include #include #include /* * 32KHz clocksource ... always available, on pretty most chips except * OMAP 730 and 1510. Other timers could be used as clocksources, with * higher resolution in free-running counter modes (e.g. 12 MHz xtal), * but systems won't necessarily want to spend resources that way. */ #define OMAP2_32KSYNCNT_REV_OFF 0x0 #define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) #define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 #define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 struct ti_32k { void __iomem *base; void __iomem *counter; struct clocksource cs; }; static inline struct ti_32k *to_ti_32k(struct clocksource *cs) { return container_of(cs, struct ti_32k, cs); } static u64 notrace ti_32k_read_cycles(struct clocksource *cs) { struct ti_32k *ti = to_ti_32k(cs); return (u64)readl_relaxed(ti->counter); } static struct ti_32k ti_32k_timer = { .cs = { .name = "32k_counter", .rating = 250, .read = ti_32k_read_cycles, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }, }; static u64 notrace omap_32k_read_sched_clock(void) { return ti_32k_read_cycles(&ti_32k_timer.cs); } static void __init ti_32k_timer_enable_clock(struct device_node *np, const char *name) { struct clk *clock; int error; clock = of_clk_get_by_name(np->parent, name); if (IS_ERR(clock)) { /* Only some SoCs have a separate interface clock */ if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3)) return; pr_warn("%s: could not get clock %s %li\n", __func__, name, PTR_ERR(clock)); return; } error = clk_prepare_enable(clock); if (error) { pr_warn("%s: could not enable %s: %i\n", __func__, name, error); return; } } static void __init ti_32k_timer_module_init(struct device_node *np, void __iomem *base) { void __iomem *sysc = base + 4; if (!of_device_is_compatible(np->parent, "ti,sysc")) return; ti_32k_timer_enable_clock(np, "fck"); ti_32k_timer_enable_clock(np, "ick"); /* * Force idle module as wkup domain is active with MPU. * No need to tag the module disabled for ti-sysc probe. */ writel_relaxed(0, sysc); } static int __init ti_32k_timer_init(struct device_node *np) { int ret; ti_32k_timer.base = of_iomap(np, 0); if (!ti_32k_timer.base) { pr_err("Can't ioremap 32k timer base\n"); return -ENXIO; } if (!of_machine_is_compatible("ti,am43")) ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; ti_32k_timer.counter = ti_32k_timer.base; ti_32k_timer_module_init(np, ti_32k_timer.base); /* * 32k sync Counter IP register offsets vary between the highlander * version and the legacy ones. * * The 'SCHEME' bits(30-31) of the revision register is used to identify * the version. */ if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) & OMAP2_32KSYNCNT_REV_SCHEME) ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH; else ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW; pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); ret = clocksource_register_hz(&ti_32k_timer.cs, 32768); if (ret) { pr_err("32k_counter: can't register clocksource\n"); return ret; } sched_clock_register(omap_32k_read_sched_clock, 32, 32768); return 0; } TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k", ti_32k_timer_init);