/* * Intel D82875P Memory Controller kernel module * (C) 2003 Linux Networx (http://lnxi.com) * This file may be distributed under the terms of the * GNU General Public License. * * Written by Thayne Harbaugh * Contributors: * Wang Zhenyu at intel.com * * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ * * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com */ #include #include #include #include #include #include #include "edac_mc.h" #ifndef PCI_DEVICE_ID_INTEL_82875_0 #define PCI_DEVICE_ID_INTEL_82875_0 0x2578 #endif /* PCI_DEVICE_ID_INTEL_82875_0 */ #ifndef PCI_DEVICE_ID_INTEL_82875_6 #define PCI_DEVICE_ID_INTEL_82875_6 0x257e #endif /* PCI_DEVICE_ID_INTEL_82875_6 */ /* four csrows in dual channel, eight in single channel */ #define I82875P_NR_CSROWS(nr_chans) (8/(nr_chans)) /* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */ #define I82875P_EAP 0x58 /* Error Address Pointer (32b) * * 31:12 block address * 11:0 reserved */ #define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b) * * 7:0 DRAM ECC Syndrome */ #define I82875P_DES 0x5d /* DRAM Error Status (8b) * * 7:1 reserved * 0 Error channel 0/1 */ #define I82875P_ERRSTS 0xc8 /* Error Status Register (16b) * * 15:10 reserved * 9 non-DRAM lock error (ndlock) * 8 Sftwr Generated SMI * 7 ECC UE * 6 reserved * 5 MCH detects unimplemented cycle * 4 AGP access outside GA * 3 Invalid AGP access * 2 Invalid GA translation table * 1 Unsupported AGP command * 0 ECC CE */ #define I82875P_ERRCMD 0xca /* Error Command (16b) * * 15:10 reserved * 9 SERR on non-DRAM lock * 8 SERR on ECC UE * 7 SERR on ECC CE * 6 target abort on high exception * 5 detect unimplemented cyc * 4 AGP access outside of GA * 3 SERR on invalid AGP access * 2 invalid translation table * 1 SERR on unsupported AGP command * 0 reserved */ /* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */ #define I82875P_PCICMD6 0x04 /* PCI Command Register (16b) * * 15:10 reserved * 9 fast back-to-back - ro 0 * 8 SERR enable - ro 0 * 7 addr/data stepping - ro 0 * 6 parity err enable - ro 0 * 5 VGA palette snoop - ro 0 * 4 mem wr & invalidate - ro 0 * 3 special cycle - ro 0 * 2 bus master - ro 0 * 1 mem access dev6 - 0(dis),1(en) * 0 IO access dev3 - 0(dis),1(en) */ #define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b) * * 31:12 mem base addr [31:12] * 11:4 address mask - ro 0 * 3 prefetchable - ro 0(non),1(pre) * 2:1 mem type - ro 0 * 0 mem space - ro 0 */ /* Intel 82875p MMIO register space - device 0 function 0 - MMR space */ #define I82875P_DRB_SHIFT 26 /* 64MiB grain */ #define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8) * * 7 reserved * 6:0 64MiB row boundary addr */ #define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8) * * 7 reserved * 6:4 row attr row 1 * 3 reserved * 2:0 row attr row 0 * * 000 = 4KiB * 001 = 8KiB * 010 = 16KiB * 011 = 32KiB */ #define I82875P_DRC 0x68 /* DRAM Controller Mode (32b) * * 31:30 reserved * 29 init complete * 28:23 reserved * 22:21 nr chan 00=1,01=2 * 20 reserved * 19:18 Data Integ Mode 00=none,01=ecc * 17:11 reserved * 10:8 refresh mode * 7 reserved * 6:4 mode select * 3:2 reserved * 1:0 DRAM type 01=DDR */ enum i82875p_chips { I82875P = 0, }; struct i82875p_pvt { struct pci_dev *ovrfl_pdev; void *ovrfl_window; }; struct i82875p_dev_info { const char *ctl_name; }; struct i82875p_error_info { u16 errsts; u32 eap; u8 des; u8 derrsyn; u16 errsts2; }; static const struct i82875p_dev_info i82875p_devs[] = { [I82875P] = { .ctl_name = "i82875p"}, }; static struct pci_dev *mci_pdev = NULL; /* init dev: in case that AGP code has already registered driver */ static int i82875p_registered = 1; static void i82875p_get_error_info (struct mem_ctl_info *mci, struct i82875p_error_info *info) { /* * This is a mess because there is no atomic way to read all the * registers at once and the registers can transition from CE being * overwritten by UE. */ pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts); pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap); pci_read_config_byte(mci->pdev, I82875P_DES, &info->des); pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn); pci_read_config_word(mci->pdev, I82875P_ERRSTS, &info->errsts2); pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081); /* * If the error is the same then we can for both reads then * the first set of reads is valid. If there is a change then * there is a CE no info and the second set of reads is valid * and should be UE info. */ if (!(info->errsts2 & 0x0081)) return; if ((info->errsts ^ info->errsts2) & 0x0081) { pci_read_config_dword(mci->pdev, I82875P_EAP, &info->eap); pci_read_config_byte(mci->pdev, I82875P_DES, &info->des); pci_read_config_byte(mci->pdev, I82875P_DERRSYN, &info->derrsyn); } } static int i82875p_process_error_info (struct mem_ctl_info *mci, struct i82875p_error_info *info, int handle_errors) { int row, multi_chan; multi_chan = mci->csrows[0].nr_channels - 1; if (!(info->errsts2 & 0x0081)) return 0; if (!handle_errors) return 1; if ((info->errsts ^ info->errsts2) & 0x0081) { edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); info->errsts = info->errsts2; } info->eap >>= PAGE_SHIFT; row = edac_mc_find_csrow_by_page(mci, info->eap); if (info->errsts & 0x0080) edac_mc_handle_ue(mci, info->eap, 0, row, "i82875p UE"); else edac_mc_handle_ce(mci, info->eap, 0, info->derrsyn, row, multi_chan ? (info->des & 0x1) : 0, "i82875p CE"); return 1; } static void i82875p_check(struct mem_ctl_info *mci) { struct i82875p_error_info info; debugf1("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__); i82875p_get_error_info(mci, &info); i82875p_process_error_info(mci, &info, 1); } #ifdef CONFIG_PROC_FS extern int pci_proc_attach_device(struct pci_dev *); #endif static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) { int rc = -ENODEV; int index; struct mem_ctl_info *mci = NULL; struct i82875p_pvt *pvt = NULL; unsigned long last_cumul_size; struct pci_dev *ovrfl_pdev; void __iomem *ovrfl_window = NULL; u32 drc; u32 drc_chan; /* Number of channels 0=1chan,1=2chan */ u32 nr_chans; u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ debugf0("MC: " __FILE__ ": %s()\n", __func__); ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); if (!ovrfl_pdev) { /* * Intel tells BIOS developers to hide device 6 which * configures the overflow device access containing * the DRBs - this is where we expose device 6. * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm */ pci_write_bits8(pdev, 0xf4, 0x2, 0x2); ovrfl_pdev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); if (!ovrfl_pdev) goto fail; } #ifdef CONFIG_PROC_FS if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) { printk(KERN_ERR "MC: " __FILE__ ": %s(): Failed to attach overflow device\n", __func__); goto fail; } #endif /* CONFIG_PROC_FS */ if (pci_enable_device(ovrfl_pdev)) { printk(KERN_ERR "MC: " __FILE__ ": %s(): Failed to enable overflow device\n", __func__); goto fail; } if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) { #ifdef CORRECT_BIOS goto fail; #endif } /* cache is irrelevant for PCI bus reads/writes */ ovrfl_window = ioremap_nocache(pci_resource_start(ovrfl_pdev, 0), pci_resource_len(ovrfl_pdev, 0)); if (!ovrfl_window) { printk(KERN_ERR "MC: " __FILE__ ": %s(): Failed to ioremap bar6\n", __func__); goto fail; } /* need to find out the number of channels */ drc = readl(ovrfl_window + I82875P_DRC); drc_chan = ((drc >> 21) & 0x1); nr_chans = drc_chan + 1; drc_ddim = (drc >> 18) & 0x1; mci = edac_mc_alloc(sizeof(*pvt), I82875P_NR_CSROWS(nr_chans), nr_chans); if (!mci) { rc = -ENOMEM; goto fail; } debugf3("MC: " __FILE__ ": %s(): init mci\n", __func__); mci->pdev = pdev; mci->mtype_cap = MEM_FLAG_DDR; mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; mci->edac_cap = EDAC_FLAG_UNKNOWN; /* adjust FLAGS */ mci->mod_name = BS_MOD_STR; mci->mod_ver = "$Revision: 1.5.2.11 $"; mci->ctl_name = i82875p_devs[dev_idx].ctl_name; mci->edac_check = i82875p_check; mci->ctl_page_to_phys = NULL; debugf3("MC: " __FILE__ ": %s(): init pvt\n", __func__); pvt = (struct i82875p_pvt *) mci->pvt_info; pvt->ovrfl_pdev = ovrfl_pdev; pvt->ovrfl_window = ovrfl_window; /* * The dram row boundary (DRB) reg values are boundary address * for each DRAM row with a granularity of 32 or 64MB (single/dual * channel operation). DRB regs are cumulative; therefore DRB7 will * contain the total memory contained in all eight rows. */ for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { u8 value; u32 cumul_size; struct csrow_info *csrow = &mci->csrows[index]; value = readb(ovrfl_window + I82875P_DRB + index); cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT); debugf3("MC: " __FILE__ ": %s(): (%d) cumul_size 0x%x\n", __func__, index, cumul_size); if (cumul_size == last_cumul_size) continue; /* not populated */ csrow->first_page = last_cumul_size; csrow->last_page = cumul_size - 1; csrow->nr_pages = cumul_size - last_cumul_size; last_cumul_size = cumul_size; csrow->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ csrow->mtype = MEM_DDR; csrow->dtype = DEV_UNKNOWN; csrow->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE; } /* clear counters */ pci_write_bits16(mci->pdev, I82875P_ERRSTS, 0x0081, 0x0081); if (edac_mc_add_mc(mci)) { debugf3("MC: " __FILE__ ": %s(): failed edac_mc_add_mc()\n", __func__); goto fail; } /* get this far and it's successful */ debugf3("MC: " __FILE__ ": %s(): success\n", __func__); return 0; fail: if (mci) edac_mc_free(mci); if (ovrfl_window) iounmap(ovrfl_window); if (ovrfl_pdev) { pci_release_regions(ovrfl_pdev); pci_disable_device(ovrfl_pdev); } /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ return rc; } /* returns count (>= 0), or negative on error */ static int __devinit i82875p_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int rc; debugf0("MC: " __FILE__ ": %s()\n", __func__); printk(KERN_INFO "i82875p init one\n"); if(pci_enable_device(pdev) < 0) return -EIO; rc = i82875p_probe1(pdev, ent->driver_data); if (mci_pdev == NULL) mci_pdev = pci_dev_get(pdev); return rc; } static void __devexit i82875p_remove_one(struct pci_dev *pdev) { struct mem_ctl_info *mci; struct i82875p_pvt *pvt = NULL; debugf0(__FILE__ ": %s()\n", __func__); if ((mci = edac_mc_find_mci_by_pdev(pdev)) == NULL) return; pvt = (struct i82875p_pvt *) mci->pvt_info; if (pvt->ovrfl_window) iounmap(pvt->ovrfl_window); if (pvt->ovrfl_pdev) { #ifdef CORRECT_BIOS pci_release_regions(pvt->ovrfl_pdev); #endif /*CORRECT_BIOS */ pci_disable_device(pvt->ovrfl_pdev); pci_dev_put(pvt->ovrfl_pdev); } if (edac_mc_del_mc(mci)) return; edac_mc_free(mci); } static const struct pci_device_id i82875p_pci_tbl[] __devinitdata = { {PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, I82875P}, {0,} /* 0 terminated list. */ }; MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl); static struct pci_driver i82875p_driver = { .name = BS_MOD_STR, .probe = i82875p_init_one, .remove = __devexit_p(i82875p_remove_one), .id_table = i82875p_pci_tbl, }; static int __init i82875p_init(void) { int pci_rc; debugf3("MC: " __FILE__ ": %s()\n", __func__); pci_rc = pci_register_driver(&i82875p_driver); if (pci_rc < 0) return pci_rc; if (mci_pdev == NULL) { i82875p_registered = 0; mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_0, NULL); if (!mci_pdev) { debugf0("875p pci_get_device fail\n"); return -ENODEV; } pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl); if (pci_rc < 0) { debugf0("875p init fail\n"); pci_dev_put(mci_pdev); return -ENODEV; } } return 0; } static void __exit i82875p_exit(void) { debugf3("MC: " __FILE__ ": %s()\n", __func__); pci_unregister_driver(&i82875p_driver); if (!i82875p_registered) { i82875p_remove_one(mci_pdev); pci_dev_put(mci_pdev); } } module_init(i82875p_init); module_exit(i82875p_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers");