/* * Copyright © 2006-2007 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt */ #include #include #include #include #include #include #include #include "intel_drv.h" #include #include "i915_drv.h" /* Here's the desired hotplug mode */ #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 | \ ADPA_CRT_HOTPLUG_WARMUP_10MS | \ ADPA_CRT_HOTPLUG_SAMPLE_4S | \ ADPA_CRT_HOTPLUG_VOLTAGE_50 | \ ADPA_CRT_HOTPLUG_VOLREF_325MV | \ ADPA_CRT_HOTPLUG_ENABLE) struct intel_crt { struct intel_encoder base; /* DPMS state is stored in the connector, which we need in the * encoder's enable/disable callbacks */ struct intel_connector *connector; bool force_hotplug_required; i915_reg_t adpa_reg; }; static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder) { return container_of(encoder, struct intel_crt, base); } static struct intel_crt *intel_attached_crt(struct drm_connector *connector) { return intel_encoder_to_crt(intel_attached_encoder(connector)); } bool intel_crt_port_enabled(struct drm_i915_private *dev_priv, i915_reg_t adpa_reg, enum pipe *pipe) { u32 val; val = I915_READ(adpa_reg); /* asserts want to know the pipe even if the port is disabled */ if (HAS_PCH_CPT(dev_priv)) *pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT; else *pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT; return val & ADPA_DAC_ENABLE; } static bool intel_crt_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_crt *crt = intel_encoder_to_crt(encoder); bool ret; if (!intel_display_power_get_if_enabled(dev_priv, encoder->power_domain)) return false; ret = intel_crt_port_enabled(dev_priv, crt->adpa_reg, pipe); intel_display_power_put(dev_priv, encoder->power_domain); return ret; } static unsigned int intel_crt_get_flags(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_crt *crt = intel_encoder_to_crt(encoder); u32 tmp, flags = 0; tmp = I915_READ(crt->adpa_reg); if (tmp & ADPA_HSYNC_ACTIVE_HIGH) flags |= DRM_MODE_FLAG_PHSYNC; else flags |= DRM_MODE_FLAG_NHSYNC; if (tmp & ADPA_VSYNC_ACTIVE_HIGH) flags |= DRM_MODE_FLAG_PVSYNC; else flags |= DRM_MODE_FLAG_NVSYNC; return flags; } static void intel_crt_get_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG); pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder); pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock; } static void hsw_crt_get_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); intel_ddi_get_config(encoder, pipe_config); pipe_config->base.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC); pipe_config->base.adjusted_mode.flags |= intel_crt_get_flags(encoder); pipe_config->base.adjusted_mode.crtc_clock = lpt_get_iclkip(dev_priv); } /* Note: The caller is required to filter out dpms modes not supported by the * platform. */ static void intel_crt_set_dpms(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, int mode) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_crt *crt = intel_encoder_to_crt(encoder); struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode; u32 adpa; if (INTEL_GEN(dev_priv) >= 5) adpa = ADPA_HOTPLUG_BITS; else adpa = 0; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) adpa |= ADPA_HSYNC_ACTIVE_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) adpa |= ADPA_VSYNC_ACTIVE_HIGH; /* For CPT allow 3 pipe config, for others just use A or B */ if (HAS_PCH_LPT(dev_priv)) ; /* Those bits don't exist here */ else if (HAS_PCH_CPT(dev_priv)) adpa |= ADPA_PIPE_SEL_CPT(crtc->pipe); else adpa |= ADPA_PIPE_SEL(crtc->pipe); if (!HAS_PCH_SPLIT(dev_priv)) I915_WRITE(BCLRPAT(crtc->pipe), 0); switch (mode) { case DRM_MODE_DPMS_ON: adpa |= ADPA_DAC_ENABLE; break; case DRM_MODE_DPMS_STANDBY: adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE; break; case DRM_MODE_DPMS_SUSPEND: adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE; break; case DRM_MODE_DPMS_OFF: adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE; break; } I915_WRITE(crt->adpa_reg, adpa); } static void intel_disable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF); } static void pch_disable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { } static void pch_post_disable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { intel_disable_crt(encoder, old_crtc_state, old_conn_state); } static void hsw_disable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); WARN_ON(!old_crtc_state->has_pch_encoder); intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); } static void hsw_post_disable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *old_crtc_state, const struct drm_connector_state *old_conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); intel_ddi_disable_pipe_clock(old_crtc_state); pch_post_disable_crt(encoder, old_crtc_state, old_conn_state); lpt_disable_pch_transcoder(dev_priv); lpt_disable_iclkip(dev_priv); intel_ddi_fdi_post_disable(encoder, old_crtc_state, old_conn_state); WARN_ON(!old_crtc_state->has_pch_encoder); intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); } static void hsw_pre_pll_enable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); WARN_ON(!crtc_state->has_pch_encoder); intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); } static void hsw_pre_enable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); enum pipe pipe = crtc->pipe; WARN_ON(!crtc_state->has_pch_encoder); intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false); dev_priv->display.fdi_link_train(crtc, crtc_state); intel_ddi_enable_pipe_clock(crtc_state); } static void hsw_enable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); enum pipe pipe = crtc->pipe; WARN_ON(!crtc_state->has_pch_encoder); intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON); intel_wait_for_vblank(dev_priv, pipe); intel_wait_for_vblank(dev_priv, pipe); intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true); intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); } static void intel_enable_crt(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state) { intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON); } static enum drm_mode_status intel_crt_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = to_i915(dev); int max_dotclk = dev_priv->max_dotclk_freq; int max_clock; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) return MODE_NO_DBLESCAN; if (mode->clock < 25000) return MODE_CLOCK_LOW; if (HAS_PCH_LPT(dev_priv)) max_clock = 180000; else if (IS_VALLEYVIEW(dev_priv)) /* * 270 MHz due to current DPLL limits, * DAC limit supposedly 355 MHz. */ max_clock = 270000; else if (IS_GEN_RANGE(dev_priv, 3, 4)) max_clock = 400000; else max_clock = 350000; if (mode->clock > max_clock) return MODE_CLOCK_HIGH; if (mode->clock > max_dotclk) return MODE_CLOCK_HIGH; /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */ if (HAS_PCH_LPT(dev_priv) && (ironlake_get_lanes_required(mode->clock, 270000, 24) > 2)) return MODE_CLOCK_HIGH; /* HSW/BDW FDI limited to 4k */ if (mode->hdisplay > 4096) return MODE_H_ILLEGAL; return MODE_OK; } static bool intel_crt_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) return false; pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; return true; } static bool pch_crt_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) return false; pipe_config->has_pch_encoder = true; pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; return true; } static bool hsw_crt_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) return false; /* HSW/BDW FDI limited to 4k */ if (adjusted_mode->crtc_hdisplay > 4096 || adjusted_mode->crtc_hblank_start > 4096) return false; pipe_config->has_pch_encoder = true; pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB; /* LPT FDI RX only supports 8bpc. */ if (HAS_PCH_LPT(dev_priv)) { if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) { DRM_DEBUG_KMS("LPT only supports 24bpp\n"); return false; } pipe_config->pipe_bpp = 24; } /* FDI must always be 2.7 GHz */ pipe_config->port_clock = 135000 * 2; return true; } static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct intel_crt *crt = intel_attached_crt(connector); struct drm_i915_private *dev_priv = to_i915(dev); u32 adpa; bool ret; /* The first time through, trigger an explicit detection cycle */ if (crt->force_hotplug_required) { bool turn_off_dac = HAS_PCH_SPLIT(dev_priv); u32 save_adpa; crt->force_hotplug_required = 0; save_adpa = adpa = I915_READ(crt->adpa_reg); DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa); adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; if (turn_off_dac) adpa &= ~ADPA_DAC_ENABLE; I915_WRITE(crt->adpa_reg, adpa); if (intel_wait_for_register(dev_priv, crt->adpa_reg, ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 0, 1000)) DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER"); if (turn_off_dac) { I915_WRITE(crt->adpa_reg, save_adpa); POSTING_READ(crt->adpa_reg); } } /* Check the status to see if both blue and green are on now */ adpa = I915_READ(crt->adpa_reg); if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) ret = true; else ret = false; DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret); return ret; } static bool valleyview_crt_detect_hotplug(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct intel_crt *crt = intel_attached_crt(connector); struct drm_i915_private *dev_priv = to_i915(dev); bool reenable_hpd; u32 adpa; bool ret; u32 save_adpa; /* * Doing a force trigger causes a hpd interrupt to get sent, which can * get us stuck in a loop if we're polling: * - We enable power wells and reset the ADPA * - output_poll_exec does force probe on VGA, triggering a hpd * - HPD handler waits for poll to unlock dev->mode_config.mutex * - output_poll_exec shuts off the ADPA, unlocks * dev->mode_config.mutex * - HPD handler runs, resets ADPA and brings us back to the start * * Just disable HPD interrupts here to prevent this */ reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin); save_adpa = adpa = I915_READ(crt->adpa_reg); DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa); adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER; I915_WRITE(crt->adpa_reg, adpa); if (intel_wait_for_register(dev_priv, crt->adpa_reg, ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 0, 1000)) { DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER"); I915_WRITE(crt->adpa_reg, save_adpa); } /* Check the status to see if both blue and green are on now */ adpa = I915_READ(crt->adpa_reg); if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0) ret = true; else ret = false; DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret); if (reenable_hpd) intel_hpd_enable(dev_priv, crt->base.hpd_pin); return ret; } static bool intel_crt_detect_hotplug(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = to_i915(dev); u32 stat; bool ret = false; int i, tries = 0; if (HAS_PCH_SPLIT(dev_priv)) return intel_ironlake_crt_detect_hotplug(connector); if (IS_VALLEYVIEW(dev_priv)) return valleyview_crt_detect_hotplug(connector); /* * On 4 series desktop, CRT detect sequence need to be done twice * to get a reliable result. */ if (IS_G45(dev_priv)) tries = 2; else tries = 1; for (i = 0; i < tries ; i++) { /* turn on the FORCE_DETECT */ i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, CRT_HOTPLUG_FORCE_DETECT); /* wait for FORCE_DETECT to go off */ if (intel_wait_for_register(dev_priv, PORT_HOTPLUG_EN, CRT_HOTPLUG_FORCE_DETECT, 0, 1000)) DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off"); } stat = I915_READ(PORT_HOTPLUG_STAT); if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE) ret = true; /* clear the interrupt we just generated, if any */ I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS); i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0); return ret; } static struct edid *intel_crt_get_edid(struct drm_connector *connector, struct i2c_adapter *i2c) { struct edid *edid; edid = drm_get_edid(connector, i2c); if (!edid && !intel_gmbus_is_forced_bit(i2c)) { DRM_DEBUG_KMS("CRT GMBUS EDID read failed, retry using GPIO bit-banging\n"); intel_gmbus_force_bit(i2c, true); edid = drm_get_edid(connector, i2c); intel_gmbus_force_bit(i2c, false); } return edid; } /* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */ static int intel_crt_ddc_get_modes(struct drm_connector *connector, struct i2c_adapter *adapter) { struct edid *edid; int ret; edid = intel_crt_get_edid(connector, adapter); if (!edid) return 0; ret = intel_connector_update_modes(connector, edid); kfree(edid); return ret; } static bool intel_crt_detect_ddc(struct drm_connector *connector) { struct intel_crt *crt = intel_attached_crt(connector); struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev); struct edid *edid; struct i2c_adapter *i2c; bool ret = false; BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG); i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin); edid = intel_crt_get_edid(connector, i2c); if (edid) { bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL; /* * This may be a DVI-I connector with a shared DDC * link between analog and digital outputs, so we * have to check the EDID input spec of the attached device. */ if (!is_digital) { DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n"); ret = true; } else { DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n"); } } else { DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n"); } kfree(edid); return ret; } static enum drm_connector_status intel_crt_load_detect(struct intel_crt *crt, uint32_t pipe) { struct drm_device *dev = crt->base.base.dev; struct drm_i915_private *dev_priv = to_i915(dev); uint32_t save_bclrpat; uint32_t save_vtotal; uint32_t vtotal, vactive; uint32_t vsample; uint32_t vblank, vblank_start, vblank_end; uint32_t dsl; i915_reg_t bclrpat_reg, vtotal_reg, vblank_reg, vsync_reg, pipeconf_reg, pipe_dsl_reg; uint8_t st00; enum drm_connector_status status; DRM_DEBUG_KMS("starting load-detect on CRT\n"); bclrpat_reg = BCLRPAT(pipe); vtotal_reg = VTOTAL(pipe); vblank_reg = VBLANK(pipe); vsync_reg = VSYNC(pipe); pipeconf_reg = PIPECONF(pipe); pipe_dsl_reg = PIPEDSL(pipe); save_bclrpat = I915_READ(bclrpat_reg); save_vtotal = I915_READ(vtotal_reg); vblank = I915_READ(vblank_reg); vtotal = ((save_vtotal >> 16) & 0xfff) + 1; vactive = (save_vtotal & 0x7ff) + 1; vblank_start = (vblank & 0xfff) + 1; vblank_end = ((vblank >> 16) & 0xfff) + 1; /* Set the border color to purple. */ I915_WRITE(bclrpat_reg, 0x500050); if (!IS_GEN(dev_priv, 2)) { uint32_t pipeconf = I915_READ(pipeconf_reg); I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER); POSTING_READ(pipeconf_reg); /* Wait for next Vblank to substitue * border color for Color info */ intel_wait_for_vblank(dev_priv, pipe); st00 = I915_READ8(_VGA_MSR_WRITE); status = ((st00 & (1 << 4)) != 0) ? connector_status_connected : connector_status_disconnected; I915_WRITE(pipeconf_reg, pipeconf); } else { bool restore_vblank = false; int count, detect; /* * If there isn't any border, add some. * Yes, this will flicker */ if (vblank_start <= vactive && vblank_end >= vtotal) { uint32_t vsync = I915_READ(vsync_reg); uint32_t vsync_start = (vsync & 0xffff) + 1; vblank_start = vsync_start; I915_WRITE(vblank_reg, (vblank_start - 1) | ((vblank_end - 1) << 16)); restore_vblank = true; } /* sample in the vertical border, selecting the larger one */ if (vblank_start - vactive >= vtotal - vblank_end) vsample = (vblank_start + vactive) >> 1; else vsample = (vtotal + vblank_end) >> 1; /* * Wait for the border to be displayed */ while (I915_READ(pipe_dsl_reg) >= vactive) ; while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample) ; /* * Watch ST00 for an entire scanline */ detect = 0; count = 0; do { count++; /* Read the ST00 VGA status register */ st00 = I915_READ8(_VGA_MSR_WRITE); if (st00 & (1 << 4)) detect++; } while ((I915_READ(pipe_dsl_reg) == dsl)); /* restore vblank if necessary */ if (restore_vblank) I915_WRITE(vblank_reg, vblank); /* * If more than 3/4 of the scanline detected a monitor, * then it is assumed to be present. This works even on i830, * where there isn't any way to force the border color across * the screen */ status = detect * 4 > count * 3 ? connector_status_connected : connector_status_disconnected; } /* Restore previous settings */ I915_WRITE(bclrpat_reg, save_bclrpat); return status; } static int intel_spurious_crt_detect_dmi_callback(const struct dmi_system_id *id) { DRM_DEBUG_DRIVER("Skipping CRT detection for %s\n", id->ident); return 1; } static const struct dmi_system_id intel_spurious_crt_detect[] = { { .callback = intel_spurious_crt_detect_dmi_callback, .ident = "ACER ZGB", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ACER"), DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), }, }, { .callback = intel_spurious_crt_detect_dmi_callback, .ident = "Intel DZ77BH-55K", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), DMI_MATCH(DMI_BOARD_NAME, "DZ77BH-55K"), }, }, { } }; static int intel_crt_detect(struct drm_connector *connector, struct drm_modeset_acquire_ctx *ctx, bool force) { struct drm_i915_private *dev_priv = to_i915(connector->dev); struct intel_crt *crt = intel_attached_crt(connector); struct intel_encoder *intel_encoder = &crt->base; int status, ret; struct intel_load_detect_pipe tmp; DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n", connector->base.id, connector->name, force); if (i915_modparams.load_detect_test) { intel_display_power_get(dev_priv, intel_encoder->power_domain); goto load_detect; } /* Skip machines without VGA that falsely report hotplug events */ if (dmi_check_system(intel_spurious_crt_detect)) return connector_status_disconnected; intel_display_power_get(dev_priv, intel_encoder->power_domain); if (I915_HAS_HOTPLUG(dev_priv)) { /* We can not rely on the HPD pin always being correctly wired * up, for example many KVM do not pass it through, and so * only trust an assertion that the monitor is connected. */ if (intel_crt_detect_hotplug(connector)) { DRM_DEBUG_KMS("CRT detected via hotplug\n"); status = connector_status_connected; goto out; } else DRM_DEBUG_KMS("CRT not detected via hotplug\n"); } if (intel_crt_detect_ddc(connector)) { status = connector_status_connected; goto out; } /* Load detection is broken on HPD capable machines. Whoever wants a * broken monitor (without edid) to work behind a broken kvm (that fails * to have the right resistors for HP detection) needs to fix this up. * For now just bail out. */ if (I915_HAS_HOTPLUG(dev_priv)) { status = connector_status_disconnected; goto out; } load_detect: if (!force) { status = connector->status; goto out; } /* for pre-945g platforms use load detect */ ret = intel_get_load_detect_pipe(connector, NULL, &tmp, ctx); if (ret > 0) { if (intel_crt_detect_ddc(connector)) status = connector_status_connected; else if (INTEL_GEN(dev_priv) < 4) status = intel_crt_load_detect(crt, to_intel_crtc(connector->state->crtc)->pipe); else if (i915_modparams.load_detect_test) status = connector_status_disconnected; else status = connector_status_unknown; intel_release_load_detect_pipe(connector, &tmp, ctx); } else if (ret == 0) { status = connector_status_unknown; } else { status = ret; } out: intel_display_power_put(dev_priv, intel_encoder->power_domain); return status; } static int intel_crt_get_modes(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = to_i915(dev); struct intel_crt *crt = intel_attached_crt(connector); struct intel_encoder *intel_encoder = &crt->base; int ret; struct i2c_adapter *i2c; intel_display_power_get(dev_priv, intel_encoder->power_domain); i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin); ret = intel_crt_ddc_get_modes(connector, i2c); if (ret || !IS_G4X(dev_priv)) goto out; /* Try to probe digital port for output in DVI-I -> VGA mode. */ i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB); ret = intel_crt_ddc_get_modes(connector, i2c); out: intel_display_power_put(dev_priv, intel_encoder->power_domain); return ret; } void intel_crt_reset(struct drm_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->dev); struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder)); if (INTEL_GEN(dev_priv) >= 5) { u32 adpa; adpa = I915_READ(crt->adpa_reg); adpa &= ~ADPA_CRT_HOTPLUG_MASK; adpa |= ADPA_HOTPLUG_BITS; I915_WRITE(crt->adpa_reg, adpa); POSTING_READ(crt->adpa_reg); DRM_DEBUG_KMS("crt adpa set to 0x%x\n", adpa); crt->force_hotplug_required = 1; } } /* * Routines for controlling stuff on the analog port */ static const struct drm_connector_funcs intel_crt_connector_funcs = { .fill_modes = drm_helper_probe_single_connector_modes, .late_register = intel_connector_register, .early_unregister = intel_connector_unregister, .destroy = intel_connector_destroy, .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, }; static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = { .detect_ctx = intel_crt_detect, .mode_valid = intel_crt_mode_valid, .get_modes = intel_crt_get_modes, }; static const struct drm_encoder_funcs intel_crt_enc_funcs = { .reset = intel_crt_reset, .destroy = intel_encoder_destroy, }; void intel_crt_init(struct drm_i915_private *dev_priv) { struct drm_connector *connector; struct intel_crt *crt; struct intel_connector *intel_connector; i915_reg_t adpa_reg; u32 adpa; if (HAS_PCH_SPLIT(dev_priv)) adpa_reg = PCH_ADPA; else if (IS_VALLEYVIEW(dev_priv)) adpa_reg = VLV_ADPA; else adpa_reg = ADPA; adpa = I915_READ(adpa_reg); if ((adpa & ADPA_DAC_ENABLE) == 0) { /* * On some machines (some IVB at least) CRT can be * fused off, but there's no known fuse bit to * indicate that. On these machine the ADPA register * works normally, except the DAC enable bit won't * take. So the only way to tell is attempt to enable * it and see what happens. */ I915_WRITE(adpa_reg, adpa | ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE); if ((I915_READ(adpa_reg) & ADPA_DAC_ENABLE) == 0) return; I915_WRITE(adpa_reg, adpa); } crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); if (!crt) return; intel_connector = intel_connector_alloc(); if (!intel_connector) { kfree(crt); return; } connector = &intel_connector->base; crt->connector = intel_connector; drm_connector_init(&dev_priv->drm, &intel_connector->base, &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); drm_encoder_init(&dev_priv->drm, &crt->base.base, &intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC, "CRT"); intel_connector_attach_encoder(intel_connector, &crt->base); crt->base.type = INTEL_OUTPUT_ANALOG; crt->base.cloneable = (1 << INTEL_OUTPUT_DVO) | (1 << INTEL_OUTPUT_HDMI); if (IS_I830(dev_priv)) crt->base.crtc_mask = (1 << 0); else crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); if (IS_GEN(dev_priv, 2)) connector->interlace_allowed = 0; else connector->interlace_allowed = 1; connector->doublescan_allowed = 0; crt->adpa_reg = adpa_reg; crt->base.power_domain = POWER_DOMAIN_PORT_CRT; if (I915_HAS_HOTPLUG(dev_priv) && !dmi_check_system(intel_spurious_crt_detect)) { crt->base.hpd_pin = HPD_CRT; crt->base.hotplug = intel_encoder_hotplug; } if (HAS_DDI(dev_priv)) { crt->base.port = PORT_E; crt->base.get_config = hsw_crt_get_config; crt->base.get_hw_state = intel_ddi_get_hw_state; crt->base.compute_config = hsw_crt_compute_config; crt->base.pre_pll_enable = hsw_pre_pll_enable_crt; crt->base.pre_enable = hsw_pre_enable_crt; crt->base.enable = hsw_enable_crt; crt->base.disable = hsw_disable_crt; crt->base.post_disable = hsw_post_disable_crt; } else { if (HAS_PCH_SPLIT(dev_priv)) { crt->base.compute_config = pch_crt_compute_config; crt->base.disable = pch_disable_crt; crt->base.post_disable = pch_post_disable_crt; } else { crt->base.compute_config = intel_crt_compute_config; crt->base.disable = intel_disable_crt; } crt->base.port = PORT_NONE; crt->base.get_config = intel_crt_get_config; crt->base.get_hw_state = intel_crt_get_hw_state; crt->base.enable = intel_enable_crt; } intel_connector->get_hw_state = intel_connector_get_hw_state; drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); if (!I915_HAS_HOTPLUG(dev_priv)) intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT; /* * Configure the automatic hotplug detection stuff */ crt->force_hotplug_required = 0; /* * TODO: find a proper way to discover whether we need to set the the * polarity and link reversal bits or not, instead of relying on the * BIOS. */ if (HAS_PCH_LPT(dev_priv)) { u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT | FDI_RX_LINK_REVERSAL_OVERRIDE; dev_priv->fdi_rx_config = I915_READ(FDI_RX_CTL(PIPE_A)) & fdi_config; } intel_crt_reset(&crt->base.base); }