/* * adt7410.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring * This driver handles the ADT7410 and compatible digital temperature sensors. * Hartmut Knaack 2012-07-22 * based on lm75.c by Frodo Looijaard * and adt7410.c from iio-staging by Sonic Zhang * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include /* * ADT7410 registers definition */ #define ADT7410_TEMPERATURE 0 #define ADT7410_STATUS 2 #define ADT7410_CONFIG 3 #define ADT7410_T_ALARM_HIGH 4 #define ADT7410_T_ALARM_LOW 6 #define ADT7410_T_CRIT 8 #define ADT7410_T_HYST 0xA /* * ADT7410 status */ #define ADT7410_STAT_T_LOW (1 << 4) #define ADT7410_STAT_T_HIGH (1 << 5) #define ADT7410_STAT_T_CRIT (1 << 6) #define ADT7410_STAT_NOT_RDY (1 << 7) /* * ADT7410 config */ #define ADT7410_FAULT_QUEUE_MASK (1 << 0 | 1 << 1) #define ADT7410_CT_POLARITY (1 << 2) #define ADT7410_INT_POLARITY (1 << 3) #define ADT7410_EVENT_MODE (1 << 4) #define ADT7410_MODE_MASK (1 << 5 | 1 << 6) #define ADT7410_FULL (0 << 5 | 0 << 6) #define ADT7410_PD (1 << 5 | 1 << 6) #define ADT7410_RESOLUTION (1 << 7) /* * ADT7410 masks */ #define ADT7410_T13_VALUE_MASK 0xFFF8 #define ADT7410_T_HYST_MASK 0xF /* straight from the datasheet */ #define ADT7410_TEMP_MIN (-55000) #define ADT7410_TEMP_MAX 150000 enum adt7410_type { /* keep sorted in alphabetical order */ adt7410, }; static const u8 ADT7410_REG_TEMP[4] = { ADT7410_TEMPERATURE, /* input */ ADT7410_T_ALARM_HIGH, /* high */ ADT7410_T_ALARM_LOW, /* low */ ADT7410_T_CRIT, /* critical */ }; /* Each client has this additional data */ struct adt7410_data { struct device *hwmon_dev; struct mutex update_lock; u8 config; u8 oldconfig; bool valid; /* true if registers valid */ unsigned long last_updated; /* In jiffies */ s16 temp[4]; /* Register values, 0 = input 1 = high 2 = low 3 = critical */ u8 hyst; /* hysteresis offset */ }; /* * adt7410 register access by I2C */ static int adt7410_temp_ready(struct i2c_client *client) { int i, status; for (i = 0; i < 6; i++) { status = i2c_smbus_read_byte_data(client, ADT7410_STATUS); if (status < 0) return status; if (!(status & ADT7410_STAT_NOT_RDY)) return 0; msleep(60); } return -ETIMEDOUT; } static struct adt7410_data *adt7410_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct adt7410_data *data = i2c_get_clientdata(client); struct adt7410_data *ret = data; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { int i, status; dev_dbg(&client->dev, "Starting update\n"); status = adt7410_temp_ready(client); /* check for new value */ if (unlikely(status)) { ret = ERR_PTR(status); goto abort; } for (i = 0; i < ARRAY_SIZE(data->temp); i++) { status = i2c_smbus_read_word_swapped(client, ADT7410_REG_TEMP[i]); if (unlikely(status < 0)) { dev_dbg(dev, "Failed to read value: reg %d, error %d\n", ADT7410_REG_TEMP[i], status); ret = ERR_PTR(status); goto abort; } data->temp[i] = status; } status = i2c_smbus_read_byte_data(client, ADT7410_T_HYST); if (unlikely(status < 0)) { dev_dbg(dev, "Failed to read value: reg %d, error %d\n", ADT7410_T_HYST, status); ret = ERR_PTR(status); goto abort; } data->hyst = status; data->last_updated = jiffies; data->valid = true; } abort: mutex_unlock(&data->update_lock); return ret; } static s16 ADT7410_TEMP_TO_REG(long temp) { return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX) * 128, 1000); } static int ADT7410_REG_TO_TEMP(struct adt7410_data *data, s16 reg) { /* in 13 bit mode, bits 0-2 are status flags - mask them out */ if (!(data->config & ADT7410_RESOLUTION)) reg &= ADT7410_T13_VALUE_MASK; /* * temperature is stored in twos complement format, in steps of * 1/128°C */ return DIV_ROUND_CLOSEST(reg * 1000, 128); } /*-----------------------------------------------------------------------*/ /* sysfs attributes for hwmon */ static ssize_t adt7410_show_temp(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct adt7410_data *data = adt7410_update_device(dev); if (IS_ERR(data)) return PTR_ERR(data); return sprintf(buf, "%d\n", ADT7410_REG_TO_TEMP(data, data->temp[attr->index])); } static ssize_t adt7410_set_temp(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct i2c_client *client = to_i2c_client(dev); struct adt7410_data *data = i2c_get_clientdata(client); int nr = attr->index; long temp; int ret; ret = kstrtol(buf, 10, &temp); if (ret) return ret; mutex_lock(&data->update_lock); data->temp[nr] = ADT7410_TEMP_TO_REG(temp); ret = i2c_smbus_write_word_swapped(client, ADT7410_REG_TEMP[nr], data->temp[nr]); if (ret) count = ret; mutex_unlock(&data->update_lock); return count; } static ssize_t adt7410_show_t_hyst(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct adt7410_data *data; int nr = attr->index; int hyst; data = adt7410_update_device(dev); if (IS_ERR(data)) return PTR_ERR(data); hyst = (data->hyst & ADT7410_T_HYST_MASK) * 1000; /* * hysteresis is stored as a 4 bit offset in the device, convert it * to an absolute value */ if (nr == 2) /* min has positive offset, others have negative */ hyst = -hyst; return sprintf(buf, "%d\n", ADT7410_REG_TO_TEMP(data, data->temp[nr]) - hyst); } static ssize_t adt7410_set_t_hyst(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct adt7410_data *data = i2c_get_clientdata(client); int limit, ret; long hyst; ret = kstrtol(buf, 10, &hyst); if (ret) return ret; /* convert absolute hysteresis value to a 4 bit delta value */ limit = ADT7410_REG_TO_TEMP(data, data->temp[1]); hyst = clamp_val(hyst, ADT7410_TEMP_MIN, ADT7410_TEMP_MAX); data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000), 0, ADT7410_T_HYST_MASK); ret = i2c_smbus_write_byte_data(client, ADT7410_T_HYST, data->hyst); if (ret) return ret; return count; } static ssize_t adt7410_show_alarm(struct device *dev, struct device_attribute *da, char *buf) { struct i2c_client *client = to_i2c_client(dev); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int ret; ret = i2c_smbus_read_byte_data(client, ADT7410_STATUS); if (ret < 0) return ret; return sprintf(buf, "%d\n", !!(ret & attr->index)); } static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7410_show_temp, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, adt7410_show_temp, adt7410_set_temp, 1); static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, adt7410_show_temp, adt7410_set_temp, 2); static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, adt7410_show_temp, adt7410_set_temp, 3); static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, adt7410_show_t_hyst, adt7410_set_t_hyst, 1); static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO, adt7410_show_t_hyst, NULL, 2); static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, adt7410_show_t_hyst, NULL, 3); static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7410_show_alarm, NULL, ADT7410_STAT_T_LOW); static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7410_show_alarm, NULL, ADT7410_STAT_T_HIGH); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7410_show_alarm, NULL, ADT7410_STAT_T_CRIT); static struct attribute *adt7410_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, &sensor_dev_attr_temp1_min_hyst.dev_attr.attr, &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, NULL }; static const struct attribute_group adt7410_group = { .attrs = adt7410_attributes, }; /*-----------------------------------------------------------------------*/ /* device probe and removal */ static int adt7410_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct adt7410_data *data; int ret; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; data = devm_kzalloc(&client->dev, sizeof(struct adt7410_data), GFP_KERNEL); if (!data) return -ENOMEM; i2c_set_clientdata(client, data); mutex_init(&data->update_lock); /* configure as specified */ ret = i2c_smbus_read_byte_data(client, ADT7410_CONFIG); if (ret < 0) { dev_dbg(&client->dev, "Can't read config? %d\n", ret); return ret; } data->oldconfig = ret; /* * Set to 16 bit resolution, continous conversion and comparator mode. */ ret &= ~ADT7410_MODE_MASK; data->config = ret | ADT7410_FULL | ADT7410_RESOLUTION | ADT7410_EVENT_MODE; if (data->config != data->oldconfig) { ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->config); if (ret) return ret; } dev_dbg(&client->dev, "Config %02x\n", data->config); /* Register sysfs hooks */ ret = sysfs_create_group(&client->dev.kobj, &adt7410_group); if (ret) goto exit_restore; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { ret = PTR_ERR(data->hwmon_dev); goto exit_remove; } dev_info(&client->dev, "sensor '%s'\n", client->name); return 0; exit_remove: sysfs_remove_group(&client->dev.kobj, &adt7410_group); exit_restore: i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->oldconfig); return ret; } static int adt7410_remove(struct i2c_client *client) { struct adt7410_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adt7410_group); if (data->oldconfig != data->config) i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->oldconfig); return 0; } static const struct i2c_device_id adt7410_ids[] = { { "adt7410", adt7410, }, { "adt7420", adt7410, }, { /* LIST END */ } }; MODULE_DEVICE_TABLE(i2c, adt7410_ids); #ifdef CONFIG_PM_SLEEP static int adt7410_suspend(struct device *dev) { int ret; struct i2c_client *client = to_i2c_client(dev); struct adt7410_data *data = i2c_get_clientdata(client); ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->config | ADT7410_PD); return ret; } static int adt7410_resume(struct device *dev) { int ret; struct i2c_client *client = to_i2c_client(dev); struct adt7410_data *data = i2c_get_clientdata(client); ret = i2c_smbus_write_byte_data(client, ADT7410_CONFIG, data->config); return ret; } static SIMPLE_DEV_PM_OPS(adt7410_dev_pm_ops, adt7410_suspend, adt7410_resume); #define ADT7410_DEV_PM_OPS (&adt7410_dev_pm_ops) #else #define ADT7410_DEV_PM_OPS NULL #endif /* CONFIG_PM */ static struct i2c_driver adt7410_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "adt7410", .pm = ADT7410_DEV_PM_OPS, }, .probe = adt7410_probe, .remove = adt7410_remove, .id_table = adt7410_ids, .address_list = I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b), }; module_i2c_driver(adt7410_driver); MODULE_AUTHOR("Hartmut Knaack"); MODULE_DESCRIPTION("ADT7410/ADT7420 driver"); MODULE_LICENSE("GPL");