/* asb100.c - Part of lm_sensors, Linux kernel modules for hardware monitoring Copyright (C) 2004 Mark M. Hoffman (derived from w83781d.c) Copyright (C) 1998 - 2003 Frodo Looijaard , Philip Edelbrock , and Mark Studebaker This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* This driver supports the hardware sensor chips: Asus ASB100 and ASB100-A "BACH". ASB100-A supports pwm1, while plain ASB100 does not. There is no known way for the driver to tell which one is there. Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA asb100 7 3 1 4 0x31 0x0694 yes no */ #include #include #include #include #include #include #include #include #include #include "lm75.h" /* HISTORY: 2003-12-29 1.0.0 Ported from lm_sensors project for kernel 2.6 */ #define ASB100_VERSION "1.0.0" /* I2C addresses to scan */ static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(asb100); I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " "{bus, clientaddr, subclientaddr1, subclientaddr2}"); /* Voltage IN registers 0-6 */ #define ASB100_REG_IN(nr) (0x20 + (nr)) #define ASB100_REG_IN_MAX(nr) (0x2b + (nr * 2)) #define ASB100_REG_IN_MIN(nr) (0x2c + (nr * 2)) /* FAN IN registers 1-3 */ #define ASB100_REG_FAN(nr) (0x28 + (nr)) #define ASB100_REG_FAN_MIN(nr) (0x3b + (nr)) /* TEMPERATURE registers 1-4 */ static const u16 asb100_reg_temp[] = {0, 0x27, 0x150, 0x250, 0x17}; static const u16 asb100_reg_temp_max[] = {0, 0x39, 0x155, 0x255, 0x18}; static const u16 asb100_reg_temp_hyst[] = {0, 0x3a, 0x153, 0x253, 0x19}; #define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr]) #define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr]) #define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr]) #define ASB100_REG_TEMP2_CONFIG 0x0152 #define ASB100_REG_TEMP3_CONFIG 0x0252 #define ASB100_REG_CONFIG 0x40 #define ASB100_REG_ALARM1 0x41 #define ASB100_REG_ALARM2 0x42 #define ASB100_REG_SMIM1 0x43 #define ASB100_REG_SMIM2 0x44 #define ASB100_REG_VID_FANDIV 0x47 #define ASB100_REG_I2C_ADDR 0x48 #define ASB100_REG_CHIPID 0x49 #define ASB100_REG_I2C_SUBADDR 0x4a #define ASB100_REG_PIN 0x4b #define ASB100_REG_IRQ 0x4c #define ASB100_REG_BANK 0x4e #define ASB100_REG_CHIPMAN 0x4f #define ASB100_REG_WCHIPID 0x58 /* bit 7 -> enable, bits 0-3 -> duty cycle */ #define ASB100_REG_PWM1 0x59 /* CONVERSIONS Rounding and limit checking is only done on the TO_REG variants. */ /* These constants are a guess, consistent w/ w83781d */ #define ASB100_IN_MIN ( 0) #define ASB100_IN_MAX (4080) /* IN: 1/1000 V (0V to 4.08V) REG: 16mV/bit */ static u8 IN_TO_REG(unsigned val) { unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX); return (nval + 8) / 16; } static unsigned IN_FROM_REG(u8 reg) { return reg * 16; } static u8 FAN_TO_REG(long rpm, int div) { if (rpm == -1) return 0; if (rpm == 0) return 255; rpm = SENSORS_LIMIT(rpm, 1, 1000000); return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } static int FAN_FROM_REG(u8 val, int div) { return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); } /* These constants are a guess, consistent w/ w83781d */ #define ASB100_TEMP_MIN (-128000) #define ASB100_TEMP_MAX ( 127000) /* TEMP: 0.001C/bit (-128C to +127C) REG: 1C/bit, two's complement */ static u8 TEMP_TO_REG(int temp) { int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX); ntemp += (ntemp<0 ? -500 : 500); return (u8)(ntemp / 1000); } static int TEMP_FROM_REG(u8 reg) { return (s8)reg * 1000; } /* PWM: 0 - 255 per sensors documentation REG: (6.25% duty cycle per bit) */ static u8 ASB100_PWM_TO_REG(int pwm) { pwm = SENSORS_LIMIT(pwm, 0, 255); return (u8)(pwm / 16); } static int ASB100_PWM_FROM_REG(u8 reg) { return reg * 16; } #define DIV_FROM_REG(val) (1 << (val)) /* FAN DIV: 1, 2, 4, or 8 (defaults to 2) REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */ static u8 DIV_TO_REG(long val) { return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1; } /* For each registered client, we need to keep some data in memory. That data is pointed to by client->data. The structure itself is dynamically allocated, at the same time the client itself is allocated. */ struct asb100_data { struct i2c_client client; struct class_device *class_dev; struct mutex lock; enum chips type; struct mutex update_lock; unsigned long last_updated; /* In jiffies */ /* array of 2 pointers to subclients */ struct i2c_client *lm75[2]; char valid; /* !=0 if following fields are valid */ u8 in[7]; /* Register value */ u8 in_max[7]; /* Register value */ u8 in_min[7]; /* Register value */ u8 fan[3]; /* Register value */ u8 fan_min[3]; /* Register value */ u16 temp[4]; /* Register value (0 and 3 are u8 only) */ u16 temp_max[4]; /* Register value (0 and 3 are u8 only) */ u16 temp_hyst[4]; /* Register value (0 and 3 are u8 only) */ u8 fan_div[3]; /* Register encoding, right justified */ u8 pwm; /* Register encoding */ u8 vid; /* Register encoding, combined */ u32 alarms; /* Register encoding, combined */ u8 vrm; }; static int asb100_read_value(struct i2c_client *client, u16 reg); static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val); static int asb100_attach_adapter(struct i2c_adapter *adapter); static int asb100_detect(struct i2c_adapter *adapter, int address, int kind); static int asb100_detach_client(struct i2c_client *client); static struct asb100_data *asb100_update_device(struct device *dev); static void asb100_init_client(struct i2c_client *client); static struct i2c_driver asb100_driver = { .driver = { .name = "asb100", }, .id = I2C_DRIVERID_ASB100, .attach_adapter = asb100_attach_adapter, .detach_client = asb100_detach_client, }; /* 7 Voltages */ #define show_in_reg(reg) \ static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ { \ struct asb100_data *data = asb100_update_device(dev); \ return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \ } show_in_reg(in) show_in_reg(in_min) show_in_reg(in_max) #define set_in_reg(REG, reg) \ static ssize_t set_in_##reg(struct device *dev, const char *buf, \ size_t count, int nr) \ { \ struct i2c_client *client = to_i2c_client(dev); \ struct asb100_data *data = i2c_get_clientdata(client); \ unsigned long val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ asb100_write_value(client, ASB100_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ } set_in_reg(MIN, min) set_in_reg(MAX, max) #define sysfs_in(offset) \ static ssize_t \ show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_in(dev, buf, offset); \ } \ static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ show_in##offset, NULL); \ static ssize_t \ show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_in_min(dev, buf, offset); \ } \ static ssize_t \ show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_in_max(dev, buf, offset); \ } \ static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ return set_in_min(dev, buf, count, offset); \ } \ static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ return set_in_max(dev, buf, count, offset); \ } \ static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ show_in##offset##_min, set_in##offset##_min); \ static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ show_in##offset##_max, set_in##offset##_max); sysfs_in(0); sysfs_in(1); sysfs_in(2); sysfs_in(3); sysfs_in(4); sysfs_in(5); sysfs_in(6); #define device_create_file_in(client, offset) do { \ device_create_file(&client->dev, &dev_attr_in##offset##_input); \ device_create_file(&client->dev, &dev_attr_in##offset##_min); \ device_create_file(&client->dev, &dev_attr_in##offset##_max); \ } while (0) /* 3 Fans */ static ssize_t show_fan(struct device *dev, char *buf, int nr) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], DIV_FROM_REG(data->fan_div[nr]))); } static ssize_t show_fan_min(struct device *dev, char *buf, int nr) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); } static ssize_t show_fan_div(struct device *dev, char *buf, int nr) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); } static ssize_t set_fan_min(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct asb100_data *data = i2c_get_clientdata(client); u32 val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } /* Note: we save and restore the fan minimum here, because its value is determined in part by the fan divisor. This follows the principle of least suprise; the user doesn't expect the fan minimum to change just because the divisor changed. */ static ssize_t set_fan_div(struct device *dev, const char *buf, size_t count, int nr) { struct i2c_client *client = to_i2c_client(dev); struct asb100_data *data = i2c_get_clientdata(client); unsigned long min; unsigned long val = simple_strtoul(buf, NULL, 10); int reg; mutex_lock(&data->update_lock); min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); data->fan_div[nr] = DIV_TO_REG(val); switch(nr) { case 0: /* fan 1 */ reg = asb100_read_value(client, ASB100_REG_VID_FANDIV); reg = (reg & 0xcf) | (data->fan_div[0] << 4); asb100_write_value(client, ASB100_REG_VID_FANDIV, reg); break; case 1: /* fan 2 */ reg = asb100_read_value(client, ASB100_REG_VID_FANDIV); reg = (reg & 0x3f) | (data->fan_div[1] << 6); asb100_write_value(client, ASB100_REG_VID_FANDIV, reg); break; case 2: /* fan 3 */ reg = asb100_read_value(client, ASB100_REG_PIN); reg = (reg & 0x3f) | (data->fan_div[2] << 6); asb100_write_value(client, ASB100_REG_PIN, reg); break; } data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } #define sysfs_fan(offset) \ static ssize_t show_fan##offset(struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_fan(dev, buf, offset - 1); \ } \ static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_fan_min(dev, buf, offset - 1); \ } \ static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_fan_div(dev, buf, offset - 1); \ } \ static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ size_t count) \ { \ return set_fan_min(dev, buf, count, offset - 1); \ } \ static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \ size_t count) \ { \ return set_fan_div(dev, buf, count, offset - 1); \ } \ static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ show_fan##offset, NULL); \ static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ show_fan##offset##_min, set_fan##offset##_min); \ static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ show_fan##offset##_div, set_fan##offset##_div); sysfs_fan(1); sysfs_fan(2); sysfs_fan(3); #define device_create_file_fan(client, offset) do { \ device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ } while (0) /* 4 Temp. Sensors */ static int sprintf_temp_from_reg(u16 reg, char *buf, int nr) { int ret = 0; switch (nr) { case 1: case 2: ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg)); break; case 0: case 3: default: ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg)); break; } return ret; } #define show_temp_reg(reg) \ static ssize_t show_##reg(struct device *dev, char *buf, int nr) \ { \ struct asb100_data *data = asb100_update_device(dev); \ return sprintf_temp_from_reg(data->reg[nr], buf, nr); \ } show_temp_reg(temp); show_temp_reg(temp_max); show_temp_reg(temp_hyst); #define set_temp_reg(REG, reg) \ static ssize_t set_##reg(struct device *dev, const char *buf, \ size_t count, int nr) \ { \ struct i2c_client *client = to_i2c_client(dev); \ struct asb100_data *data = i2c_get_clientdata(client); \ unsigned long val = simple_strtoul(buf, NULL, 10); \ \ mutex_lock(&data->update_lock); \ switch (nr) { \ case 1: case 2: \ data->reg[nr] = LM75_TEMP_TO_REG(val); \ break; \ case 0: case 3: default: \ data->reg[nr] = TEMP_TO_REG(val); \ break; \ } \ asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \ data->reg[nr]); \ mutex_unlock(&data->update_lock); \ return count; \ } set_temp_reg(MAX, temp_max); set_temp_reg(HYST, temp_hyst); #define sysfs_temp(num) \ static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_temp(dev, buf, num-1); \ } \ static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \ static ssize_t show_temp_max##num(struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_temp_max(dev, buf, num-1); \ } \ static ssize_t set_temp_max##num(struct device *dev, struct device_attribute *attr, const char *buf, \ size_t count) \ { \ return set_temp_max(dev, buf, count, num-1); \ } \ static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \ show_temp_max##num, set_temp_max##num); \ static ssize_t show_temp_hyst##num(struct device *dev, struct device_attribute *attr, char *buf) \ { \ return show_temp_hyst(dev, buf, num-1); \ } \ static ssize_t set_temp_hyst##num(struct device *dev, struct device_attribute *attr, const char *buf, \ size_t count) \ { \ return set_temp_hyst(dev, buf, count, num-1); \ } \ static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \ show_temp_hyst##num, set_temp_hyst##num); sysfs_temp(1); sysfs_temp(2); sysfs_temp(3); sysfs_temp(4); /* VID */ #define device_create_file_temp(client, num) do { \ device_create_file(&client->dev, &dev_attr_temp##num##_input); \ device_create_file(&client->dev, &dev_attr_temp##num##_max); \ device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \ } while (0) static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); } static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); #define device_create_file_vid(client) \ device_create_file(&client->dev, &dev_attr_cpu0_vid) /* VRM */ static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", data->vrm); } static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct asb100_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); data->vrm = val; return count; } /* Alarms */ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); #define device_create_file_vrm(client) \ device_create_file(&client->dev, &dev_attr_vrm); static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%u\n", data->alarms); } static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); #define device_create_file_alarms(client) \ device_create_file(&client->dev, &dev_attr_alarms) /* 1 PWM */ static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f)); } static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct asb100_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->pwm &= 0x80; /* keep the enable bit */ data->pwm |= (0x0f & ASB100_PWM_TO_REG(val)); asb100_write_value(client, ASB100_REG_PWM1, data->pwm); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm_enable1(struct device *dev, struct device_attribute *attr, char *buf) { struct asb100_data *data = asb100_update_device(dev); return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0); } static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct i2c_client *client = to_i2c_client(dev); struct asb100_data *data = i2c_get_clientdata(client); unsigned long val = simple_strtoul(buf, NULL, 10); mutex_lock(&data->update_lock); data->pwm &= 0x0f; /* keep the duty cycle bits */ data->pwm |= (val ? 0x80 : 0x00); asb100_write_value(client, ASB100_REG_PWM1, data->pwm); mutex_unlock(&data->update_lock); return count; } static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1); static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable1, set_pwm_enable1); #define device_create_file_pwm1(client) do { \ device_create_file(&new_client->dev, &dev_attr_pwm1); \ device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \ } while (0) /* This function is called when: asb100_driver is inserted (when this module is loaded), for each available adapter when a new adapter is inserted (and asb100_driver is still present) */ static int asb100_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; return i2c_probe(adapter, &addr_data, asb100_detect); } static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, int kind, struct i2c_client *new_client) { int i, id, err; struct asb100_data *data = i2c_get_clientdata(new_client); data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[0])) { err = -ENOMEM; goto ERROR_SC_0; } data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); if (!(data->lm75[1])) { err = -ENOMEM; goto ERROR_SC_1; } id = i2c_adapter_id(adapter); if (force_subclients[0] == id && force_subclients[1] == address) { for (i = 2; i <= 3; i++) { if (force_subclients[i] < 0x48 || force_subclients[i] > 0x4f) { dev_err(&new_client->dev, "invalid subclient " "address %d; must be 0x48-0x4f\n", force_subclients[i]); err = -ENODEV; goto ERROR_SC_2; } } asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR, (force_subclients[2] & 0x07) | ((force_subclients[3] & 0x07) <<4)); data->lm75[0]->addr = force_subclients[2]; data->lm75[1]->addr = force_subclients[3]; } else { int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR); data->lm75[0]->addr = 0x48 + (val & 0x07); data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07); } if(data->lm75[0]->addr == data->lm75[1]->addr) { dev_err(&new_client->dev, "duplicate addresses 0x%x " "for subclients\n", data->lm75[0]->addr); err = -ENODEV; goto ERROR_SC_2; } for (i = 0; i <= 1; i++) { i2c_set_clientdata(data->lm75[i], NULL); data->lm75[i]->adapter = adapter; data->lm75[i]->driver = &asb100_driver; data->lm75[i]->flags = 0; strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE); } if ((err = i2c_attach_client(data->lm75[0]))) { dev_err(&new_client->dev, "subclient %d registration " "at address 0x%x failed.\n", i, data->lm75[0]->addr); goto ERROR_SC_2; } if ((err = i2c_attach_client(data->lm75[1]))) { dev_err(&new_client->dev, "subclient %d registration " "at address 0x%x failed.\n", i, data->lm75[1]->addr); goto ERROR_SC_3; } return 0; /* Undo inits in case of errors */ ERROR_SC_3: i2c_detach_client(data->lm75[0]); ERROR_SC_2: kfree(data->lm75[1]); ERROR_SC_1: kfree(data->lm75[0]); ERROR_SC_0: return err; } static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) { int err; struct i2c_client *new_client; struct asb100_data *data; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("asb100.o: detect failed, " "smbus byte data not supported!\n"); err = -ENODEV; goto ERROR0; } /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. But it allows us to access asb100_{read,write}_value. */ if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) { pr_debug("asb100.o: detect failed, kzalloc failed!\n"); err = -ENOMEM; goto ERROR0; } new_client = &data->client; mutex_init(&data->lock); i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; new_client->driver = &asb100_driver; new_client->flags = 0; /* Now, we do the remaining detection. */ /* The chip may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... or force_*=... parameter, and the chip will be reset to the right bank. */ if (kind < 0) { int val1 = asb100_read_value(new_client, ASB100_REG_BANK); int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN); /* If we're in bank 0 */ if ( (!(val1 & 0x07)) && /* Check for ASB100 ID (low byte) */ ( ((!(val1 & 0x80)) && (val2 != 0x94)) || /* Check for ASB100 ID (high byte ) */ ((val1 & 0x80) && (val2 != 0x06)) ) ) { pr_debug("asb100.o: detect failed, " "bad chip id 0x%02x!\n", val2); err = -ENODEV; goto ERROR1; } } /* kind < 0 */ /* We have either had a force parameter, or we have already detected Winbond. Put it now into bank 0 and Vendor ID High Byte */ asb100_write_value(new_client, ASB100_REG_BANK, (asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80); /* Determine the chip type. */ if (kind <= 0) { int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID); int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN); if ((val1 == 0x31) && (val2 == 0x06)) kind = asb100; else { if (kind == 0) dev_warn(&new_client->dev, "ignoring " "'force' parameter for unknown chip " "at adapter %d, address 0x%02x.\n", i2c_adapter_id(adapter), address); err = -ENODEV; goto ERROR1; } } /* Fill in remaining client fields and put it into the global list */ strlcpy(new_client->name, "asb100", I2C_NAME_SIZE); data->type = kind; data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) goto ERROR1; /* Attach secondary lm75 clients */ if ((err = asb100_detect_subclients(adapter, address, kind, new_client))) goto ERROR2; /* Initialize the chip */ asb100_init_client(new_client); /* A few vars need to be filled upon startup */ data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0)); data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1)); data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2)); /* Register sysfs hooks */ data->class_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->class_dev)) { err = PTR_ERR(data->class_dev); goto ERROR3; } device_create_file_in(new_client, 0); device_create_file_in(new_client, 1); device_create_file_in(new_client, 2); device_create_file_in(new_client, 3); device_create_file_in(new_client, 4); device_create_file_in(new_client, 5); device_create_file_in(new_client, 6); device_create_file_fan(new_client, 1); device_create_file_fan(new_client, 2); device_create_file_fan(new_client, 3); device_create_file_temp(new_client, 1); device_create_file_temp(new_client, 2); device_create_file_temp(new_client, 3); device_create_file_temp(new_client, 4); device_create_file_vid(new_client); device_create_file_vrm(new_client); device_create_file_alarms(new_client); device_create_file_pwm1(new_client); return 0; ERROR3: i2c_detach_client(data->lm75[1]); i2c_detach_client(data->lm75[0]); kfree(data->lm75[1]); kfree(data->lm75[0]); ERROR2: i2c_detach_client(new_client); ERROR1: kfree(data); ERROR0: return err; } static int asb100_detach_client(struct i2c_client *client) { struct asb100_data *data = i2c_get_clientdata(client); int err; /* main client */ if (data) hwmon_device_unregister(data->class_dev); if ((err = i2c_detach_client(client))) return err; /* main client */ if (data) kfree(data); /* subclient */ else kfree(client); return 0; } /* The SMBus locks itself, usually, but nothing may access the chip between bank switches. */ static int asb100_read_value(struct i2c_client *client, u16 reg) { struct asb100_data *data = i2c_get_clientdata(client); struct i2c_client *cl; int res, bank; mutex_lock(&data->lock); bank = (reg >> 8) & 0x0f; if (bank > 2) /* switch banks */ i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank); if (bank == 0 || bank > 2) { res = i2c_smbus_read_byte_data(client, reg & 0xff); } else { /* switch to subclient */ cl = data->lm75[bank - 1]; /* convert from ISA to LM75 I2C addresses */ switch (reg & 0xff) { case 0x50: /* TEMP */ res = swab16(i2c_smbus_read_word_data (cl, 0)); break; case 0x52: /* CONFIG */ res = i2c_smbus_read_byte_data(cl, 1); break; case 0x53: /* HYST */ res = swab16(i2c_smbus_read_word_data (cl, 2)); break; case 0x55: /* MAX */ default: res = swab16(i2c_smbus_read_word_data (cl, 3)); break; } } if (bank > 2) i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); mutex_unlock(&data->lock); return res; } static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value) { struct asb100_data *data = i2c_get_clientdata(client); struct i2c_client *cl; int bank; mutex_lock(&data->lock); bank = (reg >> 8) & 0x0f; if (bank > 2) /* switch banks */ i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank); if (bank == 0 || bank > 2) { i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff); } else { /* switch to subclient */ cl = data->lm75[bank - 1]; /* convert from ISA to LM75 I2C addresses */ switch (reg & 0xff) { case 0x52: /* CONFIG */ i2c_smbus_write_byte_data(cl, 1, value & 0xff); break; case 0x53: /* HYST */ i2c_smbus_write_word_data(cl, 2, swab16(value)); break; case 0x55: /* MAX */ i2c_smbus_write_word_data(cl, 3, swab16(value)); break; } } if (bank > 2) i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); mutex_unlock(&data->lock); } static void asb100_init_client(struct i2c_client *client) { struct asb100_data *data = i2c_get_clientdata(client); int vid = 0; vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f; vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; data->vrm = vid_which_vrm(); vid = vid_from_reg(vid, data->vrm); /* Start monitoring */ asb100_write_value(client, ASB100_REG_CONFIG, (asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01); } static struct asb100_data *asb100_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct asb100_data *data = i2c_get_clientdata(client); int i; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { dev_dbg(&client->dev, "starting device update...\n"); /* 7 voltage inputs */ for (i = 0; i < 7; i++) { data->in[i] = asb100_read_value(client, ASB100_REG_IN(i)); data->in_min[i] = asb100_read_value(client, ASB100_REG_IN_MIN(i)); data->in_max[i] = asb100_read_value(client, ASB100_REG_IN_MAX(i)); } /* 3 fan inputs */ for (i = 0; i < 3; i++) { data->fan[i] = asb100_read_value(client, ASB100_REG_FAN(i)); data->fan_min[i] = asb100_read_value(client, ASB100_REG_FAN_MIN(i)); } /* 4 temperature inputs */ for (i = 1; i <= 4; i++) { data->temp[i-1] = asb100_read_value(client, ASB100_REG_TEMP(i)); data->temp_max[i-1] = asb100_read_value(client, ASB100_REG_TEMP_MAX(i)); data->temp_hyst[i-1] = asb100_read_value(client, ASB100_REG_TEMP_HYST(i)); } /* VID and fan divisors */ i = asb100_read_value(client, ASB100_REG_VID_FANDIV); data->vid = i & 0x0f; data->vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; data->fan_div[0] = (i >> 4) & 0x03; data->fan_div[1] = (i >> 6) & 0x03; data->fan_div[2] = (asb100_read_value(client, ASB100_REG_PIN) >> 6) & 0x03; /* PWM */ data->pwm = asb100_read_value(client, ASB100_REG_PWM1); /* alarms */ data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) + (asb100_read_value(client, ASB100_REG_ALARM2) << 8); data->last_updated = jiffies; data->valid = 1; dev_dbg(&client->dev, "... device update complete\n"); } mutex_unlock(&data->update_lock); return data; } static int __init asb100_init(void) { return i2c_add_driver(&asb100_driver); } static void __exit asb100_exit(void) { i2c_del_driver(&asb100_driver); } MODULE_AUTHOR("Mark M. Hoffman "); MODULE_DESCRIPTION("ASB100 Bach driver"); MODULE_LICENSE("GPL"); module_init(asb100_init); module_exit(asb100_exit);