// SPDX-License-Identifier: GPL-2.0-or-later /* * lm75.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring * Copyright (c) 1998, 1999 Frodo Looijaard */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "lm75.h" /* * This driver handles the LM75 and compatible digital temperature sensors. */ enum lm75_type { /* keep sorted in alphabetical order */ adt75, ds1775, ds75, ds7505, g751, lm75, lm75a, lm75b, max6625, max6626, max31725, mcp980x, pct2075, stds75, stlm75, tcn75, tmp100, tmp101, tmp105, tmp112, tmp175, tmp275, tmp75, tmp75b, tmp75c, }; /** * struct lm75_params - lm75 configuration parameters. * @set_mask: Bits to set in configuration register when configuring * the chip. * @clr_mask: Bits to clear in configuration register when configuring * the chip. * @default_resolution: Default number of bits to represent the temperature * value. * @resolution_limits: Limit register resolution. Optional. Should be set if * the resolution of limit registers does not match the * resolution of the temperature register. * @resolutions: List of resolutions associated with sample times. * Optional. Should be set if num_sample_times is larger * than 1, and if the resolution changes with sample times. * If set, number of entries must match num_sample_times. * @default_sample_time:Sample time to be set by default. * @num_sample_times: Number of possible sample times to be set. Optional. * Should be set if the number of sample times is larger * than one. * @sample_times: All the possible sample times to be set. Mandatory if * num_sample_times is larger than 1. If set, number of * entries must match num_sample_times. */ struct lm75_params { u8 set_mask; u8 clr_mask; u8 default_resolution; u8 resolution_limits; const u8 *resolutions; unsigned int default_sample_time; u8 num_sample_times; const unsigned int *sample_times; }; /* Addresses scanned */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; /* The LM75 registers */ #define LM75_REG_TEMP 0x00 #define LM75_REG_CONF 0x01 #define LM75_REG_HYST 0x02 #define LM75_REG_MAX 0x03 #define PCT2075_REG_IDLE 0x04 /* Each client has this additional data */ struct lm75_data { struct i2c_client *client; struct regmap *regmap; struct regulator *vs; u8 orig_conf; u8 current_conf; u8 resolution; /* In bits, 9 to 16 */ unsigned int sample_time; /* In ms */ enum lm75_type kind; const struct lm75_params *params; }; /*-----------------------------------------------------------------------*/ static const u8 lm75_sample_set_masks[] = { 0 << 5, 1 << 5, 2 << 5, 3 << 5 }; #define LM75_SAMPLE_CLEAR_MASK (3 << 5) /* The structure below stores the configuration values of the supported devices. * In case of being supported multiple configurations, the default one must * always be the first element of the array */ static const struct lm75_params device_params[] = { [adt75] = { .clr_mask = 1 << 5, /* not one-shot mode */ .default_resolution = 12, .default_sample_time = MSEC_PER_SEC / 10, }, [ds1775] = { .clr_mask = 3 << 5, .set_mask = 2 << 5, /* 11-bit mode */ .default_resolution = 11, .default_sample_time = 500, .num_sample_times = 4, .sample_times = (unsigned int []){ 125, 250, 500, 1000 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [ds75] = { .clr_mask = 3 << 5, .set_mask = 2 << 5, /* 11-bit mode */ .default_resolution = 11, .default_sample_time = 600, .num_sample_times = 4, .sample_times = (unsigned int []){ 150, 300, 600, 1200 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [stds75] = { .clr_mask = 3 << 5, .set_mask = 2 << 5, /* 11-bit mode */ .default_resolution = 11, .default_sample_time = 600, .num_sample_times = 4, .sample_times = (unsigned int []){ 150, 300, 600, 1200 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [stlm75] = { .default_resolution = 9, .default_sample_time = MSEC_PER_SEC / 6, }, [ds7505] = { .set_mask = 3 << 5, /* 12-bit mode*/ .default_resolution = 12, .default_sample_time = 200, .num_sample_times = 4, .sample_times = (unsigned int []){ 25, 50, 100, 200 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [g751] = { .default_resolution = 9, .default_sample_time = MSEC_PER_SEC / 10, }, [lm75] = { .default_resolution = 9, .default_sample_time = MSEC_PER_SEC / 10, }, [lm75a] = { .default_resolution = 9, .default_sample_time = MSEC_PER_SEC / 10, }, [lm75b] = { .default_resolution = 11, .default_sample_time = MSEC_PER_SEC / 10, }, [max6625] = { .default_resolution = 9, .default_sample_time = MSEC_PER_SEC / 7, }, [max6626] = { .default_resolution = 12, .default_sample_time = MSEC_PER_SEC / 7, .resolution_limits = 9, }, [max31725] = { .default_resolution = 16, .default_sample_time = MSEC_PER_SEC / 20, }, [tcn75] = { .default_resolution = 9, .default_sample_time = MSEC_PER_SEC / 18, }, [pct2075] = { .default_resolution = 11, .default_sample_time = MSEC_PER_SEC / 10, .num_sample_times = 31, .sample_times = (unsigned int []){ 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100 }, }, [mcp980x] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode */ .default_resolution = 12, .resolution_limits = 9, .default_sample_time = 240, .num_sample_times = 4, .sample_times = (unsigned int []){ 30, 60, 120, 240 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp100] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode */ .default_resolution = 12, .default_sample_time = 320, .num_sample_times = 4, .sample_times = (unsigned int []){ 40, 80, 160, 320 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp101] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode */ .default_resolution = 12, .default_sample_time = 320, .num_sample_times = 4, .sample_times = (unsigned int []){ 40, 80, 160, 320 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp105] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode*/ .default_resolution = 12, .default_sample_time = 220, .num_sample_times = 4, .sample_times = (unsigned int []){ 28, 55, 110, 220 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp112] = { .set_mask = 3 << 5, /* 8 samples / second */ .clr_mask = 1 << 7, /* no one-shot mode*/ .default_resolution = 12, .default_sample_time = 125, .num_sample_times = 4, .sample_times = (unsigned int []){ 125, 250, 1000, 4000 }, }, [tmp175] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode*/ .default_resolution = 12, .default_sample_time = 220, .num_sample_times = 4, .sample_times = (unsigned int []){ 28, 55, 110, 220 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp275] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode*/ .default_resolution = 12, .default_sample_time = 220, .num_sample_times = 4, .sample_times = (unsigned int []){ 28, 55, 110, 220 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp75] = { .set_mask = 3 << 5, /* 12-bit mode */ .clr_mask = 1 << 7, /* not one-shot mode*/ .default_resolution = 12, .default_sample_time = 220, .num_sample_times = 4, .sample_times = (unsigned int []){ 28, 55, 110, 220 }, .resolutions = (u8 []) {9, 10, 11, 12 }, }, [tmp75b] = { /* not one-shot mode, Conversion rate 37Hz */ .clr_mask = 1 << 7 | 3 << 5, .default_resolution = 12, .default_sample_time = MSEC_PER_SEC / 37, .sample_times = (unsigned int []){ MSEC_PER_SEC / 37, MSEC_PER_SEC / 18, MSEC_PER_SEC / 9, MSEC_PER_SEC / 4 }, .num_sample_times = 4, }, [tmp75c] = { .clr_mask = 1 << 5, /*not one-shot mode*/ .default_resolution = 12, .default_sample_time = MSEC_PER_SEC / 12, } }; static inline long lm75_reg_to_mc(s16 temp, u8 resolution) { return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); } static int lm75_write_config(struct lm75_data *data, u8 set_mask, u8 clr_mask) { u8 value; clr_mask |= LM75_SHUTDOWN; value = data->current_conf & ~clr_mask; value |= set_mask; if (data->current_conf != value) { s32 err; err = i2c_smbus_write_byte_data(data->client, LM75_REG_CONF, value); if (err) return err; data->current_conf = value; } return 0; } static int lm75_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { struct lm75_data *data = dev_get_drvdata(dev); unsigned int regval; int err, reg; switch (type) { case hwmon_chip: switch (attr) { case hwmon_chip_update_interval: *val = data->sample_time; break; default: return -EINVAL; } break; case hwmon_temp: switch (attr) { case hwmon_temp_input: reg = LM75_REG_TEMP; break; case hwmon_temp_max: reg = LM75_REG_MAX; break; case hwmon_temp_max_hyst: reg = LM75_REG_HYST; break; default: return -EINVAL; } err = regmap_read(data->regmap, reg, ®val); if (err < 0) return err; *val = lm75_reg_to_mc(regval, data->resolution); break; default: return -EINVAL; } return 0; } static int lm75_write_temp(struct device *dev, u32 attr, long temp) { struct lm75_data *data = dev_get_drvdata(dev); u8 resolution; int reg; switch (attr) { case hwmon_temp_max: reg = LM75_REG_MAX; break; case hwmon_temp_max_hyst: reg = LM75_REG_HYST; break; default: return -EINVAL; } /* * Resolution of limit registers is assumed to be the same as the * temperature input register resolution unless given explicitly. */ if (data->params->resolution_limits) resolution = data->params->resolution_limits; else resolution = data->resolution; temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); temp = DIV_ROUND_CLOSEST(temp << (resolution - 8), 1000) << (16 - resolution); return regmap_write(data->regmap, reg, (u16)temp); } static int lm75_update_interval(struct device *dev, long val) { struct lm75_data *data = dev_get_drvdata(dev); unsigned int reg; u8 index; s32 err; index = find_closest(val, data->params->sample_times, (int)data->params->num_sample_times); switch (data->kind) { default: err = lm75_write_config(data, lm75_sample_set_masks[index], LM75_SAMPLE_CLEAR_MASK); if (err) return err; data->sample_time = data->params->sample_times[index]; if (data->params->resolutions) data->resolution = data->params->resolutions[index]; break; case tmp112: err = regmap_read(data->regmap, LM75_REG_CONF, ®); if (err < 0) return err; reg &= ~0x00c0; reg |= (3 - index) << 6; err = regmap_write(data->regmap, LM75_REG_CONF, reg); if (err < 0) return err; data->sample_time = data->params->sample_times[index]; break; case pct2075: err = i2c_smbus_write_byte_data(data->client, PCT2075_REG_IDLE, index + 1); if (err) return err; data->sample_time = data->params->sample_times[index]; break; } return 0; } static int lm75_write_chip(struct device *dev, u32 attr, long val) { switch (attr) { case hwmon_chip_update_interval: return lm75_update_interval(dev, val); default: return -EINVAL; } return 0; } static int lm75_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { switch (type) { case hwmon_chip: return lm75_write_chip(dev, attr, val); case hwmon_temp: return lm75_write_temp(dev, attr, val); default: return -EINVAL; } return 0; } static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) { const struct lm75_data *config_data = data; switch (type) { case hwmon_chip: switch (attr) { case hwmon_chip_update_interval: if (config_data->params->num_sample_times > 1) return 0644; return 0444; } break; case hwmon_temp: switch (attr) { case hwmon_temp_input: return 0444; case hwmon_temp_max: case hwmon_temp_max_hyst: return 0644; } break; default: break; } return 0; } static const struct hwmon_channel_info *lm75_info[] = { HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL), HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST), NULL }; static const struct hwmon_ops lm75_hwmon_ops = { .is_visible = lm75_is_visible, .read = lm75_read, .write = lm75_write, }; static const struct hwmon_chip_info lm75_chip_info = { .ops = &lm75_hwmon_ops, .info = lm75_info, }; static bool lm75_is_writeable_reg(struct device *dev, unsigned int reg) { return reg != LM75_REG_TEMP; } static bool lm75_is_volatile_reg(struct device *dev, unsigned int reg) { return reg == LM75_REG_TEMP || reg == LM75_REG_CONF; } static const struct regmap_config lm75_regmap_config = { .reg_bits = 8, .val_bits = 16, .max_register = PCT2075_REG_IDLE, .writeable_reg = lm75_is_writeable_reg, .volatile_reg = lm75_is_volatile_reg, .val_format_endian = REGMAP_ENDIAN_BIG, .cache_type = REGCACHE_RBTREE, .use_single_read = true, .use_single_write = true, }; static void lm75_disable_regulator(void *data) { struct lm75_data *lm75 = data; regulator_disable(lm75->vs); } static void lm75_remove(void *data) { struct lm75_data *lm75 = data; struct i2c_client *client = lm75->client; i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf); } static const struct i2c_device_id lm75_ids[]; static int lm75_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct device *hwmon_dev; struct lm75_data *data; int status, err; enum lm75_type kind; if (client->dev.of_node) kind = (enum lm75_type)of_device_get_match_data(&client->dev); else kind = i2c_match_id(lm75_ids, client)->driver_data; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -EIO; data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL); if (!data) return -ENOMEM; data->client = client; data->kind = kind; data->vs = devm_regulator_get(dev, "vs"); if (IS_ERR(data->vs)) return PTR_ERR(data->vs); data->regmap = devm_regmap_init_i2c(client, &lm75_regmap_config); if (IS_ERR(data->regmap)) return PTR_ERR(data->regmap); /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. * Then tweak to be more precise when appropriate. */ data->params = &device_params[data->kind]; /* Save default sample time and resolution*/ data->sample_time = data->params->default_sample_time; data->resolution = data->params->default_resolution; /* Enable the power */ err = regulator_enable(data->vs); if (err) { dev_err(dev, "failed to enable regulator: %d\n", err); return err; } err = devm_add_action_or_reset(dev, lm75_disable_regulator, data); if (err) return err; /* Cache original configuration */ status = i2c_smbus_read_byte_data(client, LM75_REG_CONF); if (status < 0) { dev_dbg(dev, "Can't read config? %d\n", status); return status; } data->orig_conf = status; data->current_conf = status; err = lm75_write_config(data, data->params->set_mask, data->params->clr_mask); if (err) return err; err = devm_add_action_or_reset(dev, lm75_remove, data); if (err) return err; hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &lm75_chip_info, NULL); if (IS_ERR(hwmon_dev)) return PTR_ERR(hwmon_dev); dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name); return 0; } static const struct i2c_device_id lm75_ids[] = { { "adt75", adt75, }, { "ds1775", ds1775, }, { "ds75", ds75, }, { "ds7505", ds7505, }, { "g751", g751, }, { "lm75", lm75, }, { "lm75a", lm75a, }, { "lm75b", lm75b, }, { "max6625", max6625, }, { "max6626", max6626, }, { "max31725", max31725, }, { "max31726", max31725, }, { "mcp980x", mcp980x, }, { "pct2075", pct2075, }, { "stds75", stds75, }, { "stlm75", stlm75, }, { "tcn75", tcn75, }, { "tmp100", tmp100, }, { "tmp101", tmp101, }, { "tmp105", tmp105, }, { "tmp112", tmp112, }, { "tmp175", tmp175, }, { "tmp275", tmp275, }, { "tmp75", tmp75, }, { "tmp75b", tmp75b, }, { "tmp75c", tmp75c, }, { /* LIST END */ } }; MODULE_DEVICE_TABLE(i2c, lm75_ids); static const struct of_device_id __maybe_unused lm75_of_match[] = { { .compatible = "adi,adt75", .data = (void *)adt75 }, { .compatible = "dallas,ds1775", .data = (void *)ds1775 }, { .compatible = "dallas,ds75", .data = (void *)ds75 }, { .compatible = "dallas,ds7505", .data = (void *)ds7505 }, { .compatible = "gmt,g751", .data = (void *)g751 }, { .compatible = "national,lm75", .data = (void *)lm75 }, { .compatible = "national,lm75a", .data = (void *)lm75a }, { .compatible = "national,lm75b", .data = (void *)lm75b }, { .compatible = "maxim,max6625", .data = (void *)max6625 }, { .compatible = "maxim,max6626", .data = (void *)max6626 }, { .compatible = "maxim,max31725", .data = (void *)max31725 }, { .compatible = "maxim,max31726", .data = (void *)max31725 }, { .compatible = "maxim,mcp980x", .data = (void *)mcp980x }, { .compatible = "nxp,pct2075", .data = (void *)pct2075 }, { .compatible = "st,stds75", .data = (void *)stds75 }, { .compatible = "st,stlm75", .data = (void *)stlm75 }, { .compatible = "microchip,tcn75", .data = (void *)tcn75 }, { .compatible = "ti,tmp100", .data = (void *)tmp100 }, { .compatible = "ti,tmp101", .data = (void *)tmp101 }, { .compatible = "ti,tmp105", .data = (void *)tmp105 }, { .compatible = "ti,tmp112", .data = (void *)tmp112 }, { .compatible = "ti,tmp175", .data = (void *)tmp175 }, { .compatible = "ti,tmp275", .data = (void *)tmp275 }, { .compatible = "ti,tmp75", .data = (void *)tmp75 }, { .compatible = "ti,tmp75b", .data = (void *)tmp75b }, { .compatible = "ti,tmp75c", .data = (void *)tmp75c }, { }, }; MODULE_DEVICE_TABLE(of, lm75_of_match); #define LM75A_ID 0xA1 /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm75_detect(struct i2c_client *new_client, struct i2c_board_info *info) { struct i2c_adapter *adapter = new_client->adapter; int i; int conf, hyst, os; bool is_lm75a = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) return -ENODEV; /* * Now, we do the remaining detection. There is no identification- * dedicated register so we have to rely on several tricks: * unused bits, registers cycling over 8-address boundaries, * addresses 0x04-0x07 returning the last read value. * The cycling+unused addresses combination is not tested, * since it would significantly slow the detection down and would * hardly add any value. * * The National Semiconductor LM75A is different than earlier * LM75s. It has an ID byte of 0xaX (where X is the chip * revision, with 1 being the only revision in existence) in * register 7, and unused registers return 0xff rather than the * last read value. * * Note that this function only detects the original National * Semiconductor LM75 and the LM75A. Clones from other vendors * aren't detected, on purpose, because they are typically never * found on PC hardware. They are found on embedded designs where * they can be instantiated explicitly so detection is not needed. * The absence of identification registers on all these clones * would make their exhaustive detection very difficult and weak, * and odds are that the driver would bind to unsupported devices. */ /* Unused bits */ conf = i2c_smbus_read_byte_data(new_client, 1); if (conf & 0xe0) return -ENODEV; /* First check for LM75A */ if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) { /* * LM75A returns 0xff on unused registers so * just to be sure we check for that too. */ if (i2c_smbus_read_byte_data(new_client, 4) != 0xff || i2c_smbus_read_byte_data(new_client, 5) != 0xff || i2c_smbus_read_byte_data(new_client, 6) != 0xff) return -ENODEV; is_lm75a = 1; hyst = i2c_smbus_read_byte_data(new_client, 2); os = i2c_smbus_read_byte_data(new_client, 3); } else { /* Traditional style LM75 detection */ /* Unused addresses */ hyst = i2c_smbus_read_byte_data(new_client, 2); if (i2c_smbus_read_byte_data(new_client, 4) != hyst || i2c_smbus_read_byte_data(new_client, 5) != hyst || i2c_smbus_read_byte_data(new_client, 6) != hyst || i2c_smbus_read_byte_data(new_client, 7) != hyst) return -ENODEV; os = i2c_smbus_read_byte_data(new_client, 3); if (i2c_smbus_read_byte_data(new_client, 4) != os || i2c_smbus_read_byte_data(new_client, 5) != os || i2c_smbus_read_byte_data(new_client, 6) != os || i2c_smbus_read_byte_data(new_client, 7) != os) return -ENODEV; } /* * It is very unlikely that this is a LM75 if both * hysteresis and temperature limit registers are 0. */ if (hyst == 0 && os == 0) return -ENODEV; /* Addresses cycling */ for (i = 8; i <= 248; i += 40) { if (i2c_smbus_read_byte_data(new_client, i + 1) != conf || i2c_smbus_read_byte_data(new_client, i + 2) != hyst || i2c_smbus_read_byte_data(new_client, i + 3) != os) return -ENODEV; if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7) != LM75A_ID) return -ENODEV; } strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE); return 0; } #ifdef CONFIG_PM static int lm75_suspend(struct device *dev) { int status; struct i2c_client *client = to_i2c_client(dev); status = i2c_smbus_read_byte_data(client, LM75_REG_CONF); if (status < 0) { dev_dbg(&client->dev, "Can't read config? %d\n", status); return status; } status = status | LM75_SHUTDOWN; i2c_smbus_write_byte_data(client, LM75_REG_CONF, status); return 0; } static int lm75_resume(struct device *dev) { int status; struct i2c_client *client = to_i2c_client(dev); status = i2c_smbus_read_byte_data(client, LM75_REG_CONF); if (status < 0) { dev_dbg(&client->dev, "Can't read config? %d\n", status); return status; } status = status & ~LM75_SHUTDOWN; i2c_smbus_write_byte_data(client, LM75_REG_CONF, status); return 0; } static const struct dev_pm_ops lm75_dev_pm_ops = { .suspend = lm75_suspend, .resume = lm75_resume, }; #define LM75_DEV_PM_OPS (&lm75_dev_pm_ops) #else #define LM75_DEV_PM_OPS NULL #endif /* CONFIG_PM */ static struct i2c_driver lm75_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "lm75", .of_match_table = of_match_ptr(lm75_of_match), .pm = LM75_DEV_PM_OPS, }, .probe_new = lm75_probe, .id_table = lm75_ids, .detect = lm75_detect, .address_list = normal_i2c, }; module_i2c_driver(lm75_driver); MODULE_AUTHOR("Frodo Looijaard "); MODULE_DESCRIPTION("LM75 driver"); MODULE_LICENSE("GPL");