// SPDX-License-Identifier: GPL-2.0 /* * drivers/i2c/busses/i2c-tegra.c * * Copyright (C) 2010 Google, Inc. * Author: Colin Cross */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define BYTES_PER_FIFO_WORD 4 #define I2C_CNFG 0x000 #define I2C_CNFG_DEBOUNCE_CNT GENMASK(14, 12) #define I2C_CNFG_PACKET_MODE_EN BIT(10) #define I2C_CNFG_NEW_MASTER_FSM BIT(11) #define I2C_CNFG_MULTI_MASTER_MODE BIT(17) #define I2C_STATUS 0x01c #define I2C_SL_CNFG 0x020 #define I2C_SL_CNFG_NACK BIT(1) #define I2C_SL_CNFG_NEWSL BIT(2) #define I2C_SL_ADDR1 0x02c #define I2C_SL_ADDR2 0x030 #define I2C_TLOW_SEXT 0x034 #define I2C_TX_FIFO 0x050 #define I2C_RX_FIFO 0x054 #define I2C_PACKET_TRANSFER_STATUS 0x058 #define I2C_FIFO_CONTROL 0x05c #define I2C_FIFO_CONTROL_TX_FLUSH BIT(1) #define I2C_FIFO_CONTROL_RX_FLUSH BIT(0) #define I2C_FIFO_CONTROL_TX_TRIG(x) (((x) - 1) << 5) #define I2C_FIFO_CONTROL_RX_TRIG(x) (((x) - 1) << 2) #define I2C_FIFO_STATUS 0x060 #define I2C_FIFO_STATUS_TX GENMASK(7, 4) #define I2C_FIFO_STATUS_RX GENMASK(3, 0) #define I2C_INT_MASK 0x064 #define I2C_INT_STATUS 0x068 #define I2C_INT_BUS_CLR_DONE BIT(11) #define I2C_INT_PACKET_XFER_COMPLETE BIT(7) #define I2C_INT_NO_ACK BIT(3) #define I2C_INT_ARBITRATION_LOST BIT(2) #define I2C_INT_TX_FIFO_DATA_REQ BIT(1) #define I2C_INT_RX_FIFO_DATA_REQ BIT(0) #define I2C_CLK_DIVISOR 0x06c #define I2C_CLK_DIVISOR_STD_FAST_MODE GENMASK(31, 16) #define I2C_CLK_DIVISOR_HSMODE GENMASK(15, 0) #define DVC_CTRL_REG1 0x000 #define DVC_CTRL_REG1_INTR_EN BIT(10) #define DVC_CTRL_REG3 0x008 #define DVC_CTRL_REG3_SW_PROG BIT(26) #define DVC_CTRL_REG3_I2C_DONE_INTR_EN BIT(30) #define DVC_STATUS 0x00c #define DVC_STATUS_I2C_DONE_INTR BIT(30) #define I2C_ERR_NONE 0x00 #define I2C_ERR_NO_ACK BIT(0) #define I2C_ERR_ARBITRATION_LOST BIT(1) #define I2C_ERR_UNKNOWN_INTERRUPT BIT(2) #define I2C_ERR_RX_BUFFER_OVERFLOW BIT(3) #define PACKET_HEADER0_HEADER_SIZE GENMASK(29, 28) #define PACKET_HEADER0_PACKET_ID GENMASK(23, 16) #define PACKET_HEADER0_CONT_ID GENMASK(15, 12) #define PACKET_HEADER0_PROTOCOL GENMASK(7, 4) #define PACKET_HEADER0_PROTOCOL_I2C 1 #define I2C_HEADER_CONT_ON_NAK BIT(21) #define I2C_HEADER_READ BIT(19) #define I2C_HEADER_10BIT_ADDR BIT(18) #define I2C_HEADER_IE_ENABLE BIT(17) #define I2C_HEADER_REPEAT_START BIT(16) #define I2C_HEADER_CONTINUE_XFER BIT(15) #define I2C_HEADER_SLAVE_ADDR_SHIFT 1 #define I2C_BUS_CLEAR_CNFG 0x084 #define I2C_BC_SCLK_THRESHOLD GENMASK(23, 16) #define I2C_BC_STOP_COND BIT(2) #define I2C_BC_TERMINATE BIT(1) #define I2C_BC_ENABLE BIT(0) #define I2C_BUS_CLEAR_STATUS 0x088 #define I2C_BC_STATUS BIT(0) #define I2C_CONFIG_LOAD 0x08c #define I2C_MSTR_CONFIG_LOAD BIT(0) #define I2C_CLKEN_OVERRIDE 0x090 #define I2C_MST_CORE_CLKEN_OVR BIT(0) #define I2C_INTERFACE_TIMING_0 0x094 #define I2C_INTERFACE_TIMING_THIGH GENMASK(13, 8) #define I2C_INTERFACE_TIMING_TLOW GENMASK(5, 0) #define I2C_INTERFACE_TIMING_1 0x098 #define I2C_INTERFACE_TIMING_TBUF GENMASK(29, 24) #define I2C_INTERFACE_TIMING_TSU_STO GENMASK(21, 16) #define I2C_INTERFACE_TIMING_THD_STA GENMASK(13, 8) #define I2C_INTERFACE_TIMING_TSU_STA GENMASK(5, 0) #define I2C_HS_INTERFACE_TIMING_0 0x09c #define I2C_HS_INTERFACE_TIMING_THIGH GENMASK(13, 8) #define I2C_HS_INTERFACE_TIMING_TLOW GENMASK(5, 0) #define I2C_HS_INTERFACE_TIMING_1 0x0a0 #define I2C_HS_INTERFACE_TIMING_TSU_STO GENMASK(21, 16) #define I2C_HS_INTERFACE_TIMING_THD_STA GENMASK(13, 8) #define I2C_HS_INTERFACE_TIMING_TSU_STA GENMASK(5, 0) #define I2C_MST_FIFO_CONTROL 0x0b4 #define I2C_MST_FIFO_CONTROL_RX_FLUSH BIT(0) #define I2C_MST_FIFO_CONTROL_TX_FLUSH BIT(1) #define I2C_MST_FIFO_CONTROL_RX_TRIG(x) (((x) - 1) << 4) #define I2C_MST_FIFO_CONTROL_TX_TRIG(x) (((x) - 1) << 16) #define I2C_MST_FIFO_STATUS 0x0b8 #define I2C_MST_FIFO_STATUS_TX GENMASK(23, 16) #define I2C_MST_FIFO_STATUS_RX GENMASK(7, 0) /* configuration load timeout in microseconds */ #define I2C_CONFIG_LOAD_TIMEOUT 1000000 /* packet header size in bytes */ #define I2C_PACKET_HEADER_SIZE 12 /* * I2C Controller will use PIO mode for transfers up to 32 bytes in order to * avoid DMA overhead, otherwise external APB DMA controller will be used. * Note that the actual MAX PIO length is 20 bytes because 32 bytes include * I2C_PACKET_HEADER_SIZE. */ #define I2C_PIO_MODE_PREFERRED_LEN 32 /* * msg_end_type: The bus control which needs to be sent at end of transfer. * @MSG_END_STOP: Send stop pulse. * @MSG_END_REPEAT_START: Send repeat-start. * @MSG_END_CONTINUE: Don't send stop or repeat-start. */ enum msg_end_type { MSG_END_STOP, MSG_END_REPEAT_START, MSG_END_CONTINUE, }; /** * struct tegra_i2c_hw_feature : per hardware generation features * @has_continue_xfer_support: continue-transfer supported * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer * completion interrupt on per packet basis. * @has_config_load_reg: Has the config load register to load the new * configuration. * @clk_divisor_hs_mode: Clock divisor in HS mode. * @clk_divisor_std_mode: Clock divisor in standard mode. It is * applicable if there is no fast clock source i.e. single clock * source. * @clk_divisor_fast_mode: Clock divisor in fast mode. It is * applicable if there is no fast clock source i.e. single clock * source. * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is * applicable if there is no fast clock source (i.e. single * clock source). * @has_multi_master_mode: The I2C controller supports running in single-master * or multi-master mode. * @has_slcg_override_reg: The I2C controller supports a register that * overrides the second level clock gating. * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that * provides additional features and allows for longer messages to * be transferred in one go. * @quirks: I2C adapter quirks for limiting write/read transfer size and not * allowing 0 length transfers. * @supports_bus_clear: Bus Clear support to recover from bus hang during * SDA stuck low from device for some unknown reasons. * @has_apb_dma: Support of APBDMA on corresponding Tegra chip. * @tlow_std_mode: Low period of the clock in standard mode. * @thigh_std_mode: High period of the clock in standard mode. * @tlow_fast_fastplus_mode: Low period of the clock in fast/fast-plus modes. * @thigh_fast_fastplus_mode: High period of the clock in fast/fast-plus modes. * @setup_hold_time_std_mode: Setup and hold time for start and stop conditions * in standard mode. * @setup_hold_time_fast_fast_plus_mode: Setup and hold time for start and stop * conditions in fast/fast-plus modes. * @setup_hold_time_hs_mode: Setup and hold time for start and stop conditions * in HS mode. * @has_interface_timing_reg: Has interface timing register to program the tuned * timing settings. */ struct tegra_i2c_hw_feature { bool has_continue_xfer_support; bool has_per_pkt_xfer_complete_irq; bool has_config_load_reg; u32 clk_divisor_hs_mode; u32 clk_divisor_std_mode; u32 clk_divisor_fast_mode; u32 clk_divisor_fast_plus_mode; bool has_multi_master_mode; bool has_slcg_override_reg; bool has_mst_fifo; const struct i2c_adapter_quirks *quirks; bool supports_bus_clear; bool has_apb_dma; u32 tlow_std_mode; u32 thigh_std_mode; u32 tlow_fast_fastplus_mode; u32 thigh_fast_fastplus_mode; u32 setup_hold_time_std_mode; u32 setup_hold_time_fast_fast_plus_mode; u32 setup_hold_time_hs_mode; bool has_interface_timing_reg; }; /** * struct tegra_i2c_dev - per device I2C context * @dev: device reference for power management * @hw: Tegra I2C HW feature * @adapter: core I2C layer adapter information * @div_clk: clock reference for div clock of I2C controller * @clocks: array of I2C controller clocks * @nclocks: number of clocks in the array * @rst: reset control for the I2C controller * @base: ioremapped registers cookie * @base_phys: physical base address of the I2C controller * @cont_id: I2C controller ID, used for packet header * @irq: IRQ number of transfer complete interrupt * @is_dvc: identifies the DVC I2C controller, has a different register layout * @is_vi: identifies the VI I2C controller, has a different register layout * @msg_complete: transfer completion notifier * @msg_err: error code for completed message * @msg_buf: pointer to current message data * @msg_buf_remaining: size of unsent data in the message buffer * @msg_read: indicates that the transfer is a read access * @timings: i2c timings information like bus frequency * @multimaster_mode: indicates that I2C controller is in multi-master mode * @tx_dma_chan: DMA transmit channel * @rx_dma_chan: DMA receive channel * @dma_phys: handle to DMA resources * @dma_buf: pointer to allocated DMA buffer * @dma_buf_size: DMA buffer size * @dma_mode: indicates active DMA transfer * @dma_complete: DMA completion notifier * @atomic_mode: indicates active atomic transfer */ struct tegra_i2c_dev { struct device *dev; struct i2c_adapter adapter; const struct tegra_i2c_hw_feature *hw; struct reset_control *rst; unsigned int cont_id; unsigned int irq; phys_addr_t base_phys; void __iomem *base; struct clk_bulk_data clocks[2]; unsigned int nclocks; struct clk *div_clk; struct i2c_timings timings; struct completion msg_complete; size_t msg_buf_remaining; int msg_err; u8 *msg_buf; struct completion dma_complete; struct dma_chan *tx_dma_chan; struct dma_chan *rx_dma_chan; unsigned int dma_buf_size; struct device *dma_dev; dma_addr_t dma_phys; void *dma_buf; bool multimaster_mode; bool atomic_mode; bool dma_mode; bool msg_read; bool is_dvc; bool is_vi; }; static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg) { writel_relaxed(val, i2c_dev->base + reg); } static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg) { return readl_relaxed(i2c_dev->base + reg); } /* * If necessary, i2c_writel() and i2c_readl() will offset the register * in order to talk to the I2C block inside the DVC block. */ static u32 tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev, unsigned int reg) { if (i2c_dev->is_dvc) reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40; else if (i2c_dev->is_vi) reg = 0xc00 + (reg << 2); return reg; } static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg) { writel_relaxed(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); /* read back register to make sure that register writes completed */ if (reg != I2C_TX_FIFO) readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); else if (i2c_dev->is_vi) readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS)); } static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg) { return readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg)); } static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data, unsigned int reg, unsigned int len) { writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len); } static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data, unsigned int reg, unsigned int len) { u32 *data32 = data; /* * VI I2C controller has known hardware bug where writes get stuck * when immediate multiple writes happen to TX_FIFO register. * Recommended software work around is to read I2C register after * each write to TX_FIFO register to flush out the data. */ while (len--) i2c_writel(i2c_dev, *data32++, reg); } static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data, unsigned int reg, unsigned int len) { readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len); } static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask) { u32 int_mask; int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) & ~mask; i2c_writel(i2c_dev, int_mask, I2C_INT_MASK); } static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask) { u32 int_mask; int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) | mask; i2c_writel(i2c_dev, int_mask, I2C_INT_MASK); } static void tegra_i2c_dma_complete(void *args) { struct tegra_i2c_dev *i2c_dev = args; complete(&i2c_dev->dma_complete); } static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len) { struct dma_async_tx_descriptor *dma_desc; enum dma_transfer_direction dir; struct dma_chan *chan; dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len); reinit_completion(&i2c_dev->dma_complete); dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan; dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys, len, dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!dma_desc) { dev_err(i2c_dev->dev, "failed to get %s DMA descriptor\n", i2c_dev->msg_read ? "RX" : "TX"); return -EINVAL; } dma_desc->callback = tegra_i2c_dma_complete; dma_desc->callback_param = i2c_dev; dmaengine_submit(dma_desc); dma_async_issue_pending(chan); return 0; } static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev) { if (i2c_dev->dma_buf) { dma_free_coherent(i2c_dev->dma_dev, i2c_dev->dma_buf_size, i2c_dev->dma_buf, i2c_dev->dma_phys); i2c_dev->dma_buf = NULL; } if (i2c_dev->tx_dma_chan) { dma_release_channel(i2c_dev->tx_dma_chan); i2c_dev->tx_dma_chan = NULL; } if (i2c_dev->rx_dma_chan) { dma_release_channel(i2c_dev->rx_dma_chan); i2c_dev->rx_dma_chan = NULL; } } static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev) { struct dma_chan *chan; dma_addr_t dma_phys; u32 *dma_buf; int err; if (i2c_dev->is_vi) return 0; if (!i2c_dev->hw->has_apb_dma) { if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) { dev_dbg(i2c_dev->dev, "APB DMA support not enabled\n"); return 0; } } else if (!IS_ENABLED(CONFIG_TEGRA186_GPC_DMA)) { dev_dbg(i2c_dev->dev, "GPC DMA support not enabled\n"); return 0; } chan = dma_request_chan(i2c_dev->dev, "rx"); if (IS_ERR(chan)) { err = PTR_ERR(chan); goto err_out; } i2c_dev->rx_dma_chan = chan; chan = dma_request_chan(i2c_dev->dev, "tx"); if (IS_ERR(chan)) { err = PTR_ERR(chan); goto err_out; } i2c_dev->tx_dma_chan = chan; WARN_ON(i2c_dev->tx_dma_chan->device != i2c_dev->rx_dma_chan->device); i2c_dev->dma_dev = chan->device->dev; i2c_dev->dma_buf_size = i2c_dev->hw->quirks->max_write_len + I2C_PACKET_HEADER_SIZE; dma_buf = dma_alloc_coherent(i2c_dev->dma_dev, i2c_dev->dma_buf_size, &dma_phys, GFP_KERNEL | __GFP_NOWARN); if (!dma_buf) { dev_err(i2c_dev->dev, "failed to allocate DMA buffer\n"); err = -ENOMEM; goto err_out; } i2c_dev->dma_buf = dma_buf; i2c_dev->dma_phys = dma_phys; return 0; err_out: tegra_i2c_release_dma(i2c_dev); if (err != -EPROBE_DEFER) { dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err); dev_err(i2c_dev->dev, "falling back to PIO\n"); return 0; } return err; } /* * One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller) * block. This block is identical to the rest of the I2C blocks, except that * it only supports master mode, it has registers moved around, and it needs * some extra init to get it into I2C mode. The register moves are handled * by i2c_readl() and i2c_writel(). */ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev) { u32 val; val = dvc_readl(i2c_dev, DVC_CTRL_REG3); val |= DVC_CTRL_REG3_SW_PROG; val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN; dvc_writel(i2c_dev, val, DVC_CTRL_REG3); val = dvc_readl(i2c_dev, DVC_CTRL_REG1); val |= DVC_CTRL_REG1_INTR_EN; dvc_writel(i2c_dev, val, DVC_CTRL_REG1); } static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev) { u32 value; value = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, 2) | FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, 4); i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_0); value = FIELD_PREP(I2C_INTERFACE_TIMING_TBUF, 4) | FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STO, 7) | FIELD_PREP(I2C_INTERFACE_TIMING_THD_STA, 4) | FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STA, 4); i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_1); value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, 3) | FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, 8); i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_0); value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STO, 11) | FIELD_PREP(I2C_HS_INTERFACE_TIMING_THD_STA, 11) | FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STA, 11); i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_1); value = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND; i2c_writel(i2c_dev, value, I2C_BUS_CLEAR_CNFG); i2c_writel(i2c_dev, 0x0, I2C_TLOW_SEXT); } static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev, u32 reg, u32 mask, u32 delay_us, u32 timeout_us) { void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg); u32 val; if (!i2c_dev->atomic_mode) return readl_relaxed_poll_timeout(addr, val, !(val & mask), delay_us, timeout_us); return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask), delay_us, timeout_us); } static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev) { u32 mask, val, offset; int err; if (i2c_dev->hw->has_mst_fifo) { mask = I2C_MST_FIFO_CONTROL_TX_FLUSH | I2C_MST_FIFO_CONTROL_RX_FLUSH; offset = I2C_MST_FIFO_CONTROL; } else { mask = I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH; offset = I2C_FIFO_CONTROL; } val = i2c_readl(i2c_dev, offset); val |= mask; i2c_writel(i2c_dev, val, offset); err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000); if (err) { dev_err(i2c_dev->dev, "failed to flush FIFO\n"); return err; } return 0; } static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev) { int err; if (!i2c_dev->hw->has_config_load_reg) return 0; i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD); err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff, 1000, I2C_CONFIG_LOAD_TIMEOUT); if (err) { dev_err(i2c_dev->dev, "failed to load config\n"); return err; } return 0; } static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) { u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode; acpi_handle handle = ACPI_HANDLE(i2c_dev->dev); struct i2c_timings *t = &i2c_dev->timings; int err; /* * The reset shouldn't ever fail in practice. The failure will be a * sign of a severe problem that needs to be resolved. Still we don't * want to fail the initialization completely because this may break * kernel boot up since voltage regulators use I2C. Hence, we will * emit a noisy warning on error, which won't stay unnoticed and * won't hose machine entirely. */ if (handle) err = acpi_evaluate_object(handle, "_RST", NULL, NULL); else err = reset_control_reset(i2c_dev->rst); WARN_ON_ONCE(err); if (i2c_dev->is_dvc) tegra_dvc_init(i2c_dev); val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN | FIELD_PREP(I2C_CNFG_DEBOUNCE_CNT, 2); if (i2c_dev->hw->has_multi_master_mode) val |= I2C_CNFG_MULTI_MASTER_MODE; i2c_writel(i2c_dev, val, I2C_CNFG); i2c_writel(i2c_dev, 0, I2C_INT_MASK); if (i2c_dev->is_vi) tegra_i2c_vi_init(i2c_dev); switch (t->bus_freq_hz) { case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ: default: tlow = i2c_dev->hw->tlow_fast_fastplus_mode; thigh = i2c_dev->hw->thigh_fast_fastplus_mode; tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode; if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode; else non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode; break; case 0 ... I2C_MAX_STANDARD_MODE_FREQ: tlow = i2c_dev->hw->tlow_std_mode; thigh = i2c_dev->hw->thigh_std_mode; tsu_thd = i2c_dev->hw->setup_hold_time_std_mode; non_hs_mode = i2c_dev->hw->clk_divisor_std_mode; break; } /* make sure clock divisor programmed correctly */ clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE, i2c_dev->hw->clk_divisor_hs_mode) | FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE, non_hs_mode); i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR); if (i2c_dev->hw->has_interface_timing_reg) { val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) | FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow); i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0); } /* * Configure setup and hold times only when tsu_thd is non-zero. * Otherwise, preserve the chip default values. */ if (i2c_dev->hw->has_interface_timing_reg && tsu_thd) i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1); clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1); err = clk_set_rate(i2c_dev->div_clk, t->bus_freq_hz * clk_multiplier); if (err) { dev_err(i2c_dev->dev, "failed to set div-clk rate: %d\n", err); return err; } if (!i2c_dev->is_dvc && !i2c_dev->is_vi) { u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG); sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL; i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG); i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1); i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2); } err = tegra_i2c_flush_fifos(i2c_dev); if (err) return err; if (i2c_dev->multimaster_mode && i2c_dev->hw->has_slcg_override_reg) i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE); err = tegra_i2c_wait_for_config_load(i2c_dev); if (err) return err; return 0; } static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev) { u32 cnfg; /* * NACK interrupt is generated before the I2C controller generates * the STOP condition on the bus. So, wait for 2 clock periods * before disabling the controller so that the STOP condition has * been delivered properly. */ udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->timings.bus_freq_hz)); cnfg = i2c_readl(i2c_dev, I2C_CNFG); if (cnfg & I2C_CNFG_PACKET_MODE_EN) i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG); return tegra_i2c_wait_for_config_load(i2c_dev); } static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev) { size_t buf_remaining = i2c_dev->msg_buf_remaining; unsigned int words_to_transfer, rx_fifo_avail; u8 *buf = i2c_dev->msg_buf; u32 val; /* * Catch overflow due to message fully sent before the check for * RX FIFO availability. */ if (WARN_ON_ONCE(!(i2c_dev->msg_buf_remaining))) return -EINVAL; if (i2c_dev->hw->has_mst_fifo) { val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS); rx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_RX, val); } else { val = i2c_readl(i2c_dev, I2C_FIFO_STATUS); rx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_RX, val); } /* round down to exclude partial word at the end of buffer */ words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD; if (words_to_transfer > rx_fifo_avail) words_to_transfer = rx_fifo_avail; i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer); buf += words_to_transfer * BYTES_PER_FIFO_WORD; buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD; rx_fifo_avail -= words_to_transfer; /* * If there is a partial word at the end of buffer, handle it * manually to prevent overwriting past the end of buffer. */ if (rx_fifo_avail > 0 && buf_remaining > 0) { /* * buf_remaining > 3 check not needed as rx_fifo_avail == 0 * when (words_to_transfer was > rx_fifo_avail) earlier * in this function. */ val = i2c_readl(i2c_dev, I2C_RX_FIFO); val = cpu_to_le32(val); memcpy(buf, &val, buf_remaining); buf_remaining = 0; rx_fifo_avail--; } /* RX FIFO must be drained, otherwise it's an Overflow case. */ if (WARN_ON_ONCE(rx_fifo_avail)) return -EINVAL; i2c_dev->msg_buf_remaining = buf_remaining; i2c_dev->msg_buf = buf; return 0; } static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev) { size_t buf_remaining = i2c_dev->msg_buf_remaining; unsigned int words_to_transfer, tx_fifo_avail; u8 *buf = i2c_dev->msg_buf; u32 val; if (i2c_dev->hw->has_mst_fifo) { val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS); tx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_TX, val); } else { val = i2c_readl(i2c_dev, I2C_FIFO_STATUS); tx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_TX, val); } /* round down to exclude partial word at the end of buffer */ words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD; /* * This hunk pushes 4 bytes at a time into the TX FIFO. * * It's very common to have < 4 bytes, hence there is no word * to push if we have less than 4 bytes to transfer. */ if (words_to_transfer) { if (words_to_transfer > tx_fifo_avail) words_to_transfer = tx_fifo_avail; /* * Update state before writing to FIFO. Note that this may * cause us to finish writing all bytes (AKA buf_remaining * goes to 0), hence we have a potential for an interrupt * (PACKET_XFER_COMPLETE is not maskable), but GIC interrupt * is disabled at this point. */ buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD; tx_fifo_avail -= words_to_transfer; i2c_dev->msg_buf_remaining = buf_remaining; i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD; if (i2c_dev->is_vi) i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); else i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer); buf += words_to_transfer * BYTES_PER_FIFO_WORD; } /* * If there is a partial word at the end of buffer, handle it manually * to prevent reading past the end of buffer, which could cross a page * boundary and fault. */ if (tx_fifo_avail > 0 && buf_remaining > 0) { /* * buf_remaining > 3 check not needed as tx_fifo_avail == 0 * when (words_to_transfer was > tx_fifo_avail) earlier * in this function for non-zero words_to_transfer. */ memcpy(&val, buf, buf_remaining); val = le32_to_cpu(val); i2c_dev->msg_buf_remaining = 0; i2c_dev->msg_buf = NULL; i2c_writel(i2c_dev, val, I2C_TX_FIFO); } return 0; } static irqreturn_t tegra_i2c_isr(int irq, void *dev_id) { const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST; struct tegra_i2c_dev *i2c_dev = dev_id; u32 status; status = i2c_readl(i2c_dev, I2C_INT_STATUS); if (status == 0) { dev_warn(i2c_dev->dev, "IRQ status 0 %08x %08x %08x\n", i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS), i2c_readl(i2c_dev, I2C_STATUS), i2c_readl(i2c_dev, I2C_CNFG)); i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT; goto err; } if (status & status_err) { tegra_i2c_disable_packet_mode(i2c_dev); if (status & I2C_INT_NO_ACK) i2c_dev->msg_err |= I2C_ERR_NO_ACK; if (status & I2C_INT_ARBITRATION_LOST) i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST; goto err; } /* * I2C transfer is terminated during the bus clear, so skip * processing the other interrupts. */ if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE)) goto err; if (!i2c_dev->dma_mode) { if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) { if (tegra_i2c_empty_rx_fifo(i2c_dev)) { /* * Overflow error condition: message fully sent, * with no XFER_COMPLETE interrupt but hardware * asks to transfer more. */ i2c_dev->msg_err |= I2C_ERR_RX_BUFFER_OVERFLOW; goto err; } } if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) { if (i2c_dev->msg_buf_remaining) tegra_i2c_fill_tx_fifo(i2c_dev); else tegra_i2c_mask_irq(i2c_dev, I2C_INT_TX_FIFO_DATA_REQ); } } i2c_writel(i2c_dev, status, I2C_INT_STATUS); if (i2c_dev->is_dvc) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); /* * During message read XFER_COMPLETE interrupt is triggered prior to * DMA completion and during message write XFER_COMPLETE interrupt is * triggered after DMA completion. * * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer, * so forcing msg_buf_remaining to 0 in DMA mode. */ if (status & I2C_INT_PACKET_XFER_COMPLETE) { if (i2c_dev->dma_mode) i2c_dev->msg_buf_remaining = 0; /* * Underflow error condition: XFER_COMPLETE before message * fully sent. */ if (WARN_ON_ONCE(i2c_dev->msg_buf_remaining)) { i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT; goto err; } complete(&i2c_dev->msg_complete); } goto done; err: /* mask all interrupts on error */ tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST | I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ | I2C_INT_RX_FIFO_DATA_REQ); if (i2c_dev->hw->supports_bus_clear) tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE); i2c_writel(i2c_dev, status, I2C_INT_STATUS); if (i2c_dev->is_dvc) dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS); if (i2c_dev->dma_mode) { if (i2c_dev->msg_read) dmaengine_terminate_async(i2c_dev->rx_dma_chan); else dmaengine_terminate_async(i2c_dev->tx_dma_chan); complete(&i2c_dev->dma_complete); } complete(&i2c_dev->msg_complete); done: return IRQ_HANDLED; } static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev, size_t len) { struct dma_slave_config slv_config = {0}; u32 val, reg, dma_burst, reg_offset; struct dma_chan *chan; int err; if (i2c_dev->hw->has_mst_fifo) reg = I2C_MST_FIFO_CONTROL; else reg = I2C_FIFO_CONTROL; if (i2c_dev->dma_mode) { if (len & 0xF) dma_burst = 1; else if (len & 0x10) dma_burst = 4; else dma_burst = 8; if (i2c_dev->msg_read) { chan = i2c_dev->rx_dma_chan; reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_RX_FIFO); slv_config.src_addr = i2c_dev->base_phys + reg_offset; slv_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slv_config.src_maxburst = dma_burst; if (i2c_dev->hw->has_mst_fifo) val = I2C_MST_FIFO_CONTROL_RX_TRIG(dma_burst); else val = I2C_FIFO_CONTROL_RX_TRIG(dma_burst); } else { chan = i2c_dev->tx_dma_chan; reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_TX_FIFO); slv_config.dst_addr = i2c_dev->base_phys + reg_offset; slv_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slv_config.dst_maxburst = dma_burst; if (i2c_dev->hw->has_mst_fifo) val = I2C_MST_FIFO_CONTROL_TX_TRIG(dma_burst); else val = I2C_FIFO_CONTROL_TX_TRIG(dma_burst); } slv_config.device_fc = true; err = dmaengine_slave_config(chan, &slv_config); if (err) { dev_err(i2c_dev->dev, "DMA config failed: %d\n", err); dev_err(i2c_dev->dev, "falling back to PIO\n"); tegra_i2c_release_dma(i2c_dev); i2c_dev->dma_mode = false; } else { goto out; } } if (i2c_dev->hw->has_mst_fifo) val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) | I2C_MST_FIFO_CONTROL_RX_TRIG(1); else val = I2C_FIFO_CONTROL_TX_TRIG(8) | I2C_FIFO_CONTROL_RX_TRIG(1); out: i2c_writel(i2c_dev, val, reg); } static unsigned long tegra_i2c_poll_completion(struct tegra_i2c_dev *i2c_dev, struct completion *complete, unsigned int timeout_ms) { ktime_t ktime = ktime_get(); ktime_t ktimeout = ktime_add_ms(ktime, timeout_ms); do { u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS); if (status) tegra_i2c_isr(i2c_dev->irq, i2c_dev); if (completion_done(complete)) { s64 delta = ktime_ms_delta(ktimeout, ktime); return msecs_to_jiffies(delta) ?: 1; } ktime = ktime_get(); } while (ktime_before(ktime, ktimeout)); return 0; } static unsigned long tegra_i2c_wait_completion(struct tegra_i2c_dev *i2c_dev, struct completion *complete, unsigned int timeout_ms) { unsigned long ret; if (i2c_dev->atomic_mode) { ret = tegra_i2c_poll_completion(i2c_dev, complete, timeout_ms); } else { enable_irq(i2c_dev->irq); ret = wait_for_completion_timeout(complete, msecs_to_jiffies(timeout_ms)); disable_irq(i2c_dev->irq); /* * Under some rare circumstances (like running KASAN + * NFS root) CPU, which handles interrupt, may stuck in * uninterruptible state for a significant time. In this * case we will get timeout if I2C transfer is running on * a sibling CPU, despite of IRQ being raised. * * In order to handle this rare condition, the IRQ status * needs to be checked after timeout. */ if (ret == 0) ret = tegra_i2c_poll_completion(i2c_dev, complete, 0); } return ret; } static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap) { struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); u32 val, time_left; int err; reinit_completion(&i2c_dev->msg_complete); val = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND | I2C_BC_TERMINATE; i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG); err = tegra_i2c_wait_for_config_load(i2c_dev); if (err) return err; val |= I2C_BC_ENABLE; i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG); tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE); time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete, 50); tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE); if (time_left == 0) { dev_err(i2c_dev->dev, "failed to clear bus\n"); return -ETIMEDOUT; } val = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS); if (!(val & I2C_BC_STATUS)) { dev_err(i2c_dev->dev, "un-recovered arbitration lost\n"); return -EIO; } return -EAGAIN; } static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev, struct i2c_msg *msg, enum msg_end_type end_state) { u32 *dma_buf = i2c_dev->dma_buf; u32 packet_header; packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) | FIELD_PREP(PACKET_HEADER0_PROTOCOL, PACKET_HEADER0_PROTOCOL_I2C) | FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) | FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1); if (i2c_dev->dma_mode && !i2c_dev->msg_read) *dma_buf++ = packet_header; else i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); packet_header = msg->len - 1; if (i2c_dev->dma_mode && !i2c_dev->msg_read) *dma_buf++ = packet_header; else i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); packet_header = I2C_HEADER_IE_ENABLE; if (end_state == MSG_END_CONTINUE) packet_header |= I2C_HEADER_CONTINUE_XFER; else if (end_state == MSG_END_REPEAT_START) packet_header |= I2C_HEADER_REPEAT_START; if (msg->flags & I2C_M_TEN) { packet_header |= msg->addr; packet_header |= I2C_HEADER_10BIT_ADDR; } else { packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT; } if (msg->flags & I2C_M_IGNORE_NAK) packet_header |= I2C_HEADER_CONT_ON_NAK; if (msg->flags & I2C_M_RD) packet_header |= I2C_HEADER_READ; if (i2c_dev->dma_mode && !i2c_dev->msg_read) *dma_buf++ = packet_header; else i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO); } static int tegra_i2c_error_recover(struct tegra_i2c_dev *i2c_dev, struct i2c_msg *msg) { if (i2c_dev->msg_err == I2C_ERR_NONE) return 0; tegra_i2c_init(i2c_dev); /* start recovery upon arbitration loss in single master mode */ if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) { if (!i2c_dev->multimaster_mode) return i2c_recover_bus(&i2c_dev->adapter); return -EAGAIN; } if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) return 0; return -EREMOTEIO; } return -EIO; } static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, struct i2c_msg *msg, enum msg_end_type end_state) { unsigned long time_left, xfer_time = 100; size_t xfer_size; u32 int_mask; int err; err = tegra_i2c_flush_fifos(i2c_dev); if (err) return err; i2c_dev->msg_buf = msg->buf; /* The condition true implies smbus block read and len is already read */ if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE) i2c_dev->msg_buf = msg->buf + 1; i2c_dev->msg_buf_remaining = msg->len; i2c_dev->msg_err = I2C_ERR_NONE; i2c_dev->msg_read = !!(msg->flags & I2C_M_RD); reinit_completion(&i2c_dev->msg_complete); if (i2c_dev->msg_read) xfer_size = msg->len; else xfer_size = msg->len + I2C_PACKET_HEADER_SIZE; xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD); i2c_dev->dma_mode = xfer_size > I2C_PIO_MODE_PREFERRED_LEN && i2c_dev->dma_buf && !i2c_dev->atomic_mode; tegra_i2c_config_fifo_trig(i2c_dev, xfer_size); /* * Transfer time in mSec = Total bits / transfer rate * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits */ xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC, i2c_dev->timings.bus_freq_hz); int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST; tegra_i2c_unmask_irq(i2c_dev, int_mask); if (i2c_dev->dma_mode) { if (i2c_dev->msg_read) { dma_sync_single_for_device(i2c_dev->dma_dev, i2c_dev->dma_phys, xfer_size, DMA_FROM_DEVICE); err = tegra_i2c_dma_submit(i2c_dev, xfer_size); if (err) return err; } else { dma_sync_single_for_cpu(i2c_dev->dma_dev, i2c_dev->dma_phys, xfer_size, DMA_TO_DEVICE); } } tegra_i2c_push_packet_header(i2c_dev, msg, end_state); if (!i2c_dev->msg_read) { if (i2c_dev->dma_mode) { memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE, msg->buf, msg->len); dma_sync_single_for_device(i2c_dev->dma_dev, i2c_dev->dma_phys, xfer_size, DMA_TO_DEVICE); err = tegra_i2c_dma_submit(i2c_dev, xfer_size); if (err) return err; } else { tegra_i2c_fill_tx_fifo(i2c_dev); } } if (i2c_dev->hw->has_per_pkt_xfer_complete_irq) int_mask |= I2C_INT_PACKET_XFER_COMPLETE; if (!i2c_dev->dma_mode) { if (msg->flags & I2C_M_RD) int_mask |= I2C_INT_RX_FIFO_DATA_REQ; else if (i2c_dev->msg_buf_remaining) int_mask |= I2C_INT_TX_FIFO_DATA_REQ; } tegra_i2c_unmask_irq(i2c_dev, int_mask); dev_dbg(i2c_dev->dev, "unmasked IRQ: %02x\n", i2c_readl(i2c_dev, I2C_INT_MASK)); if (i2c_dev->dma_mode) { time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->dma_complete, xfer_time); /* * Synchronize DMA first, since dmaengine_terminate_sync() * performs synchronization after the transfer's termination * and we want to get a completion if transfer succeeded. */ dmaengine_synchronize(i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan); dmaengine_terminate_sync(i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan); if (!time_left && !completion_done(&i2c_dev->dma_complete)) { dev_err(i2c_dev->dev, "DMA transfer timed out\n"); tegra_i2c_init(i2c_dev); return -ETIMEDOUT; } if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) { dma_sync_single_for_cpu(i2c_dev->dma_dev, i2c_dev->dma_phys, xfer_size, DMA_FROM_DEVICE); memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg->len); } } time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete, xfer_time); tegra_i2c_mask_irq(i2c_dev, int_mask); if (time_left == 0) { dev_err(i2c_dev->dev, "I2C transfer timed out\n"); tegra_i2c_init(i2c_dev); return -ETIMEDOUT; } dev_dbg(i2c_dev->dev, "transfer complete: %lu %d %d\n", time_left, completion_done(&i2c_dev->msg_complete), i2c_dev->msg_err); i2c_dev->dma_mode = false; err = tegra_i2c_error_recover(i2c_dev, msg); if (err) return err; return 0; } static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); int i, ret; ret = pm_runtime_get_sync(i2c_dev->dev); if (ret < 0) { dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret); pm_runtime_put_noidle(i2c_dev->dev); return ret; } for (i = 0; i < num; i++) { enum msg_end_type end_type = MSG_END_STOP; if (i < (num - 1)) { /* check whether follow up message is coming */ if (msgs[i + 1].flags & I2C_M_NOSTART) end_type = MSG_END_CONTINUE; else end_type = MSG_END_REPEAT_START; } /* If M_RECV_LEN use ContinueXfer to read the first byte */ if (msgs[i].flags & I2C_M_RECV_LEN) { ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE); if (ret) break; /* Set the read byte as msg len */ msgs[i].len = msgs[i].buf[0]; dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len); } ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type); if (ret) break; } pm_runtime_put(i2c_dev->dev); return ret ?: i; } static int tegra_i2c_xfer_atomic(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); int ret; i2c_dev->atomic_mode = true; ret = tegra_i2c_xfer(adap, msgs, num); i2c_dev->atomic_mode = false; return ret; } static u32 tegra_i2c_func(struct i2c_adapter *adap) { struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap); u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING; if (i2c_dev->hw->has_continue_xfer_support) ret |= I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_READ_BLOCK_DATA; return ret; } static const struct i2c_algorithm tegra_i2c_algo = { .master_xfer = tegra_i2c_xfer, .master_xfer_atomic = tegra_i2c_xfer_atomic, .functionality = tegra_i2c_func, }; /* payload size is only 12 bit */ static const struct i2c_adapter_quirks tegra_i2c_quirks = { .flags = I2C_AQ_NO_ZERO_LEN, .max_read_len = SZ_4K, .max_write_len = SZ_4K - I2C_PACKET_HEADER_SIZE, }; static const struct i2c_adapter_quirks tegra194_i2c_quirks = { .flags = I2C_AQ_NO_ZERO_LEN, .max_write_len = SZ_64K - I2C_PACKET_HEADER_SIZE, }; static struct i2c_bus_recovery_info tegra_i2c_recovery_info = { .recover_bus = tegra_i2c_issue_bus_clear, }; static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_continue_xfer_support = false, .has_per_pkt_xfer_complete_irq = false, .clk_divisor_hs_mode = 3, .clk_divisor_std_mode = 0, .clk_divisor_fast_mode = 0, .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = false, .has_apb_dma = true, .tlow_std_mode = 0x4, .thigh_std_mode = 0x2, .tlow_fast_fastplus_mode = 0x4, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0x0, .setup_hold_time_fast_fast_plus_mode = 0x0, .setup_hold_time_hs_mode = 0x0, .has_interface_timing_reg = false, }; static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = false, .clk_divisor_hs_mode = 3, .clk_divisor_std_mode = 0, .clk_divisor_fast_mode = 0, .clk_divisor_fast_plus_mode = 0, .has_config_load_reg = false, .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = false, .has_apb_dma = true, .tlow_std_mode = 0x4, .thigh_std_mode = 0x2, .tlow_fast_fastplus_mode = 0x4, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0x0, .setup_hold_time_fast_fast_plus_mode = 0x0, .setup_hold_time_hs_mode = 0x0, .has_interface_timing_reg = false, }; static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_mode = 0x19, .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = false, .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = true, .tlow_std_mode = 0x4, .thigh_std_mode = 0x2, .tlow_fast_fastplus_mode = 0x4, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0x0, .setup_hold_time_fast_fast_plus_mode = 0x0, .setup_hold_time_hs_mode = 0x0, .has_interface_timing_reg = false, }; static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_mode = 0x19, .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = true, .tlow_std_mode = 0x4, .thigh_std_mode = 0x2, .tlow_fast_fastplus_mode = 0x4, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0x0, .setup_hold_time_fast_fast_plus_mode = 0x0, .setup_hold_time_hs_mode = 0x0, .has_interface_timing_reg = true, }; static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_mode = 0x19, .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = true, .tlow_std_mode = 0x4, .thigh_std_mode = 0x2, .tlow_fast_fastplus_mode = 0x4, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0, .setup_hold_time_fast_fast_plus_mode = 0, .setup_hold_time_hs_mode = 0, .has_interface_timing_reg = true, }; static const struct tegra_i2c_hw_feature tegra186_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_mode = 0x16, .clk_divisor_fast_mode = 0x19, .clk_divisor_fast_plus_mode = 0x10, .has_config_load_reg = true, .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, .quirks = &tegra_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = false, .tlow_std_mode = 0x4, .thigh_std_mode = 0x3, .tlow_fast_fastplus_mode = 0x4, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0, .setup_hold_time_fast_fast_plus_mode = 0, .setup_hold_time_hs_mode = 0, .has_interface_timing_reg = true, }; static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { .has_continue_xfer_support = true, .has_per_pkt_xfer_complete_irq = true, .clk_divisor_hs_mode = 1, .clk_divisor_std_mode = 0x4f, .clk_divisor_fast_mode = 0x3c, .clk_divisor_fast_plus_mode = 0x16, .has_config_load_reg = true, .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = true, .quirks = &tegra194_i2c_quirks, .supports_bus_clear = true, .has_apb_dma = false, .tlow_std_mode = 0x8, .thigh_std_mode = 0x7, .tlow_fast_fastplus_mode = 0x2, .thigh_fast_fastplus_mode = 0x2, .setup_hold_time_std_mode = 0x08080808, .setup_hold_time_fast_fast_plus_mode = 0x02020202, .setup_hold_time_hs_mode = 0x090909, .has_interface_timing_reg = true, }; static const struct of_device_id tegra_i2c_of_match[] = { { .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, }, { .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, }, { .compatible = "nvidia,tegra210-i2c-vi", .data = &tegra210_i2c_hw, }, { .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, }, { .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, }, { .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, }, { .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, }, { .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, }, { .compatible = "nvidia,tegra20-i2c-dvc", .data = &tegra20_i2c_hw, }, {}, }; MODULE_DEVICE_TABLE(of, tegra_i2c_of_match); static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev) { struct device_node *np = i2c_dev->dev->of_node; bool multi_mode; i2c_parse_fw_timings(i2c_dev->dev, &i2c_dev->timings, true); multi_mode = device_property_read_bool(i2c_dev->dev, "multi-master"); i2c_dev->multimaster_mode = multi_mode; if (of_device_is_compatible(np, "nvidia,tegra20-i2c-dvc")) i2c_dev->is_dvc = true; if (of_device_is_compatible(np, "nvidia,tegra210-i2c-vi")) i2c_dev->is_vi = true; } static int tegra_i2c_init_reset(struct tegra_i2c_dev *i2c_dev) { if (ACPI_HANDLE(i2c_dev->dev)) return 0; i2c_dev->rst = devm_reset_control_get_exclusive(i2c_dev->dev, "i2c"); if (IS_ERR(i2c_dev->rst)) return dev_err_probe(i2c_dev->dev, PTR_ERR(i2c_dev->rst), "failed to get reset control\n"); return 0; } static int tegra_i2c_init_clocks(struct tegra_i2c_dev *i2c_dev) { int err; if (ACPI_HANDLE(i2c_dev->dev)) return 0; i2c_dev->clocks[i2c_dev->nclocks++].id = "div-clk"; if (i2c_dev->hw == &tegra20_i2c_hw || i2c_dev->hw == &tegra30_i2c_hw) i2c_dev->clocks[i2c_dev->nclocks++].id = "fast-clk"; if (i2c_dev->is_vi) i2c_dev->clocks[i2c_dev->nclocks++].id = "slow"; err = devm_clk_bulk_get(i2c_dev->dev, i2c_dev->nclocks, i2c_dev->clocks); if (err) return err; err = clk_bulk_prepare(i2c_dev->nclocks, i2c_dev->clocks); if (err) return err; i2c_dev->div_clk = i2c_dev->clocks[0].clk; if (!i2c_dev->multimaster_mode) return 0; err = clk_enable(i2c_dev->div_clk); if (err) { dev_err(i2c_dev->dev, "failed to enable div-clk: %d\n", err); goto unprepare_clocks; } return 0; unprepare_clocks: clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks); return err; } static void tegra_i2c_release_clocks(struct tegra_i2c_dev *i2c_dev) { if (i2c_dev->multimaster_mode) clk_disable(i2c_dev->div_clk); clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks); } static int tegra_i2c_init_hardware(struct tegra_i2c_dev *i2c_dev) { int ret; ret = pm_runtime_get_sync(i2c_dev->dev); if (ret < 0) dev_err(i2c_dev->dev, "runtime resume failed: %d\n", ret); else ret = tegra_i2c_init(i2c_dev); pm_runtime_put_sync(i2c_dev->dev); return ret; } static int tegra_i2c_probe(struct platform_device *pdev) { struct tegra_i2c_dev *i2c_dev; struct resource *res; int err; i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); if (!i2c_dev) return -ENOMEM; platform_set_drvdata(pdev, i2c_dev); init_completion(&i2c_dev->msg_complete); init_completion(&i2c_dev->dma_complete); i2c_dev->hw = device_get_match_data(&pdev->dev); i2c_dev->cont_id = pdev->id; i2c_dev->dev = &pdev->dev; i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(i2c_dev->base)) return PTR_ERR(i2c_dev->base); i2c_dev->base_phys = res->start; err = platform_get_irq(pdev, 0); if (err < 0) return err; i2c_dev->irq = err; /* interrupt will be enabled during of transfer time */ irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN); err = devm_request_threaded_irq(i2c_dev->dev, i2c_dev->irq, NULL, tegra_i2c_isr, IRQF_NO_SUSPEND | IRQF_ONESHOT, dev_name(i2c_dev->dev), i2c_dev); if (err) return err; tegra_i2c_parse_dt(i2c_dev); err = tegra_i2c_init_reset(i2c_dev); if (err) return err; err = tegra_i2c_init_clocks(i2c_dev); if (err) return err; err = tegra_i2c_init_dma(i2c_dev); if (err) goto release_clocks; /* * VI I2C is in VE power domain which is not always ON and not * IRQ-safe. Thus, IRQ-safe device shouldn't be attached to a * non IRQ-safe domain because this prevents powering off the power * domain. * * VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't * be used for atomic transfers. */ if (!i2c_dev->is_vi) pm_runtime_irq_safe(i2c_dev->dev); pm_runtime_enable(i2c_dev->dev); err = tegra_i2c_init_hardware(i2c_dev); if (err) goto release_rpm; i2c_set_adapdata(&i2c_dev->adapter, i2c_dev); i2c_dev->adapter.dev.of_node = i2c_dev->dev->of_node; i2c_dev->adapter.dev.parent = i2c_dev->dev; i2c_dev->adapter.retries = 1; i2c_dev->adapter.timeout = 6 * HZ; i2c_dev->adapter.quirks = i2c_dev->hw->quirks; i2c_dev->adapter.owner = THIS_MODULE; i2c_dev->adapter.class = I2C_CLASS_DEPRECATED; i2c_dev->adapter.algo = &tegra_i2c_algo; i2c_dev->adapter.nr = pdev->id; if (i2c_dev->hw->supports_bus_clear) i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info; strscpy(i2c_dev->adapter.name, dev_name(i2c_dev->dev), sizeof(i2c_dev->adapter.name)); err = i2c_add_numbered_adapter(&i2c_dev->adapter); if (err) goto release_rpm; return 0; release_rpm: pm_runtime_disable(i2c_dev->dev); tegra_i2c_release_dma(i2c_dev); release_clocks: tegra_i2c_release_clocks(i2c_dev); return err; } static int tegra_i2c_remove(struct platform_device *pdev) { struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev); i2c_del_adapter(&i2c_dev->adapter); pm_runtime_force_suspend(i2c_dev->dev); tegra_i2c_release_dma(i2c_dev); tegra_i2c_release_clocks(i2c_dev); return 0; } static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); int err; err = pinctrl_pm_select_default_state(dev); if (err) return err; err = clk_bulk_enable(i2c_dev->nclocks, i2c_dev->clocks); if (err) return err; /* * VI I2C device is attached to VE power domain which goes through * power ON/OFF during runtime PM resume/suspend, meaning that * controller needs to be re-initialized after power ON. */ if (i2c_dev->is_vi) { err = tegra_i2c_init(i2c_dev); if (err) goto disable_clocks; } return 0; disable_clocks: clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks); return err; } static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks); return pinctrl_pm_select_idle_state(dev); } static int __maybe_unused tegra_i2c_suspend(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); int err; i2c_mark_adapter_suspended(&i2c_dev->adapter); if (!pm_runtime_status_suspended(dev)) { err = tegra_i2c_runtime_suspend(dev); if (err) return err; } return 0; } static int __maybe_unused tegra_i2c_resume(struct device *dev) { struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev); int err; /* * We need to ensure that clocks are enabled so that registers can be * restored in tegra_i2c_init(). */ err = tegra_i2c_runtime_resume(dev); if (err) return err; err = tegra_i2c_init(i2c_dev); if (err) return err; /* * In case we are runtime suspended, disable clocks again so that we * don't unbalance the clock reference counts during the next runtime * resume transition. */ if (pm_runtime_status_suspended(dev)) { err = tegra_i2c_runtime_suspend(dev); if (err) return err; } i2c_mark_adapter_resumed(&i2c_dev->adapter); return 0; } static const struct dev_pm_ops tegra_i2c_pm = { SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume) SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume, NULL) }; static const struct acpi_device_id tegra_i2c_acpi_match[] = { {.id = "NVDA0101", .driver_data = (kernel_ulong_t)&tegra210_i2c_hw}, {.id = "NVDA0201", .driver_data = (kernel_ulong_t)&tegra186_i2c_hw}, {.id = "NVDA0301", .driver_data = (kernel_ulong_t)&tegra194_i2c_hw}, { } }; MODULE_DEVICE_TABLE(acpi, tegra_i2c_acpi_match); static struct platform_driver tegra_i2c_driver = { .probe = tegra_i2c_probe, .remove = tegra_i2c_remove, .driver = { .name = "tegra-i2c", .of_match_table = tegra_i2c_of_match, .acpi_match_table = tegra_i2c_acpi_match, .pm = &tegra_i2c_pm, }, }; module_platform_driver(tegra_i2c_driver); MODULE_DESCRIPTION("NVIDIA Tegra I2C Bus Controller driver"); MODULE_AUTHOR("Colin Cross"); MODULE_LICENSE("GPL v2");