/* linux/drivers/i2c/scx200_acb.c Copyright (c) 2001,2002 Christer Weinigel National Semiconductor SCx200 ACCESS.bus support Based on i2c-keywest.c which is: Copyright (c) 2001 Benjamin Herrenschmidt Copyright (c) 2000 Philip Edelbrock This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include #define NAME "scx200_acb" MODULE_AUTHOR("Christer Weinigel "); MODULE_DESCRIPTION("NatSemi SCx200 ACCESS.bus Driver"); MODULE_LICENSE("GPL"); #define MAX_DEVICES 4 static int base[MAX_DEVICES] = { 0x820, 0x840 }; module_param_array(base, int, NULL, 0); MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); #ifdef DEBUG #define DBG(x...) printk(KERN_DEBUG NAME ": " x) #else #define DBG(x...) #endif /* The hardware supports interrupt driven mode too, but I haven't implemented that. */ #define POLLED_MODE 1 #define POLL_TIMEOUT (HZ) enum scx200_acb_state { state_idle, state_address, state_command, state_repeat_start, state_quick, state_read, state_write, }; static const char *scx200_acb_state_name[] = { "idle", "address", "command", "repeat_start", "quick", "read", "write", }; /* Physical interface */ struct scx200_acb_iface { struct scx200_acb_iface *next; struct i2c_adapter adapter; unsigned base; struct semaphore sem; /* State machine data */ enum scx200_acb_state state; int result; u8 address_byte; u8 command; u8 *ptr; char needs_reset; unsigned len; }; /* Register Definitions */ #define ACBSDA (iface->base + 0) #define ACBST (iface->base + 1) #define ACBST_SDAST 0x40 /* SDA Status */ #define ACBST_BER 0x20 #define ACBST_NEGACK 0x10 /* Negative Acknowledge */ #define ACBST_STASTR 0x08 /* Stall After Start */ #define ACBST_MASTER 0x02 #define ACBCST (iface->base + 2) #define ACBCST_BB 0x02 #define ACBCTL1 (iface->base + 3) #define ACBCTL1_STASTRE 0x80 #define ACBCTL1_NMINTE 0x40 #define ACBCTL1_ACK 0x10 #define ACBCTL1_STOP 0x02 #define ACBCTL1_START 0x01 #define ACBADDR (iface->base + 4) #define ACBCTL2 (iface->base + 5) #define ACBCTL2_ENABLE 0x01 /************************************************************************/ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) { const char *errmsg; DBG("state %s, status = 0x%02x\n", scx200_acb_state_name[iface->state], status); if (status & ACBST_BER) { errmsg = "bus error"; goto error; } if (!(status & ACBST_MASTER)) { errmsg = "not master"; goto error; } if (status & ACBST_NEGACK) goto negack; switch (iface->state) { case state_idle: dev_warn(&iface->adapter.dev, "interrupt in idle state\n"); break; case state_address: /* Do a pointer write first */ outb(iface->address_byte & ~1, ACBSDA); iface->state = state_command; break; case state_command: outb(iface->command, ACBSDA); if (iface->address_byte & 1) iface->state = state_repeat_start; else iface->state = state_write; break; case state_repeat_start: outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); /* fallthrough */ case state_quick: if (iface->address_byte & 1) { if (iface->len == 1) outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); else outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); outb(iface->address_byte, ACBSDA); iface->state = state_read; } else { outb(iface->address_byte, ACBSDA); iface->state = state_write; } break; case state_read: /* Set ACK if receiving the last byte */ if (iface->len == 1) outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); else outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); *iface->ptr++ = inb(ACBSDA); --iface->len; if (iface->len == 0) { iface->result = 0; iface->state = state_idle; outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); } break; case state_write: if (iface->len == 0) { iface->result = 0; iface->state = state_idle; outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); break; } outb(*iface->ptr++, ACBSDA); --iface->len; break; } return; negack: DBG("negative acknowledge in state %s\n", scx200_acb_state_name[iface->state]); iface->state = state_idle; iface->result = -ENXIO; outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); outb(ACBST_STASTR | ACBST_NEGACK, ACBST); return; error: dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg, scx200_acb_state_name[iface->state]); iface->state = state_idle; iface->result = -EIO; iface->needs_reset = 1; } static void scx200_acb_timeout(struct scx200_acb_iface *iface) { dev_err(&iface->adapter.dev, "timeout in state %s\n", scx200_acb_state_name[iface->state]); iface->state = state_idle; iface->result = -EIO; iface->needs_reset = 1; } #ifdef POLLED_MODE static void scx200_acb_poll(struct scx200_acb_iface *iface) { u8 status = 0; unsigned long timeout; timeout = jiffies + POLL_TIMEOUT; while (time_before(jiffies, timeout)) { status = inb(ACBST); if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) { scx200_acb_machine(iface, status); return; } msleep(10); } scx200_acb_timeout(iface); } #endif /* POLLED_MODE */ static void scx200_acb_reset(struct scx200_acb_iface *iface) { /* Disable the ACCESS.bus device and Configure the SCL frequency: 16 clock cycles */ outb(0x70, ACBCTL2); /* Polling mode */ outb(0, ACBCTL1); /* Disable slave address */ outb(0, ACBADDR); /* Enable the ACCESS.bus device */ outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2); /* Free STALL after START */ outb(inb(ACBCTL1) & ~(ACBCTL1_STASTRE | ACBCTL1_NMINTE), ACBCTL1); /* Send a STOP */ outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); /* Clear BER, NEGACK and STASTR bits */ outb(ACBST_BER | ACBST_NEGACK | ACBST_STASTR, ACBST); /* Clear BB bit */ outb(inb(ACBCST) | ACBCST_BB, ACBCST); } static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, u16 address, unsigned short flags, char rw, u8 command, int size, union i2c_smbus_data *data) { struct scx200_acb_iface *iface = i2c_get_adapdata(adapter); int len; u8 *buffer; u16 cur_word; int rc; switch (size) { case I2C_SMBUS_QUICK: len = 0; buffer = NULL; break; case I2C_SMBUS_BYTE: if (rw == I2C_SMBUS_READ) { len = 1; buffer = &data->byte; } else { len = 1; buffer = &command; } break; case I2C_SMBUS_BYTE_DATA: len = 1; buffer = &data->byte; break; case I2C_SMBUS_WORD_DATA: len = 2; cur_word = cpu_to_le16(data->word); buffer = (u8 *)&cur_word; break; case I2C_SMBUS_BLOCK_DATA: len = data->block[0]; buffer = &data->block[1]; break; default: return -EINVAL; } DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n", size, address, command, len, rw == I2C_SMBUS_READ); if (!len && rw == I2C_SMBUS_READ) { dev_warn(&adapter->dev, "zero length read\n"); return -EINVAL; } if (len && !buffer) { dev_warn(&adapter->dev, "nonzero length but no buffer\n"); return -EFAULT; } down(&iface->sem); iface->address_byte = address<<1; if (rw == I2C_SMBUS_READ) iface->address_byte |= 1; iface->command = command; iface->ptr = buffer; iface->len = len; iface->result = -EINVAL; iface->needs_reset = 0; outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) iface->state = state_quick; else iface->state = state_address; #ifdef POLLED_MODE while (iface->state != state_idle) scx200_acb_poll(iface); #else /* POLLED_MODE */ #error Interrupt driven mode not implemented #endif /* POLLED_MODE */ if (iface->needs_reset) scx200_acb_reset(iface); rc = iface->result; up(&iface->sem); if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ) data->word = le16_to_cpu(cur_word); #ifdef DEBUG DBG(": transfer done, result: %d", rc); if (buffer) { int i; printk(" data:"); for (i = 0; i < len; ++i) printk(" %02x", buffer[i]); } printk("\n"); #endif return rc; } static u32 scx200_acb_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; } /* For now, we only handle combined mode (smbus) */ static struct i2c_algorithm scx200_acb_algorithm = { .smbus_xfer = scx200_acb_smbus_xfer, .functionality = scx200_acb_func, }; static struct scx200_acb_iface *scx200_acb_list; static int scx200_acb_probe(struct scx200_acb_iface *iface) { u8 val; /* Disable the ACCESS.bus device and Configure the SCL frequency: 16 clock cycles */ outb(0x70, ACBCTL2); if (inb(ACBCTL2) != 0x70) { DBG("ACBCTL2 readback failed\n"); return -ENXIO; } outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1); val = inb(ACBCTL1); if (val) { DBG("disabled, but ACBCTL1=0x%02x\n", val); return -ENXIO; } outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2); outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1); val = inb(ACBCTL1); if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) { DBG("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", val); return -ENXIO; } return 0; } static int __init scx200_acb_create(int base, int index) { struct scx200_acb_iface *iface; struct i2c_adapter *adapter; int rc = 0; char description[64]; iface = kzalloc(sizeof(*iface), GFP_KERNEL); if (!iface) { printk(KERN_ERR NAME ": can't allocate memory\n"); rc = -ENOMEM; goto errout; } adapter = &iface->adapter; i2c_set_adapdata(adapter, iface); snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); adapter->owner = THIS_MODULE; adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON; init_MUTEX(&iface->sem); snprintf(description, sizeof(description), "NatSemi SCx200 ACCESS.bus [%s]", adapter->name); if (request_region(base, 8, description) == 0) { dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n", base, base + 8-1); rc = -EBUSY; goto errout; } iface->base = base; rc = scx200_acb_probe(iface); if (rc) { dev_warn(&adapter->dev, "probe failed\n"); goto errout; } scx200_acb_reset(iface); if (i2c_add_adapter(adapter) < 0) { dev_err(&adapter->dev, "failed to register\n"); rc = -ENODEV; goto errout; } lock_kernel(); iface->next = scx200_acb_list; scx200_acb_list = iface; unlock_kernel(); return 0; errout: if (iface) { if (iface->base) release_region(iface->base, 8); kfree(iface); } return rc; } static struct pci_device_id scx200[] = { { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, { }, }; static int __init scx200_acb_init(void) { int i; int rc; pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n"); /* Verify that this really is a SCx200 processor */ if (pci_dev_present(scx200) == 0) return -ENODEV; rc = -ENXIO; for (i = 0; i < MAX_DEVICES; ++i) { if (base[i] > 0) rc = scx200_acb_create(base[i], i); } if (scx200_acb_list) return 0; return rc; } static void __exit scx200_acb_cleanup(void) { struct scx200_acb_iface *iface; lock_kernel(); while ((iface = scx200_acb_list) != NULL) { scx200_acb_list = iface->next; unlock_kernel(); i2c_del_adapter(&iface->adapter); release_region(iface->base, 8); kfree(iface); lock_kernel(); } unlock_kernel(); } module_init(scx200_acb_init); module_exit(scx200_acb_cleanup); /* Local variables: compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules" c-basic-offset: 8 End: */