/* * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved. * Copyright (c) 2008 - 2012 QLogic Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ /* * This file contains all of the code that is specific to the * InfiniPath 7322 chip */ #include #include #include #include #include #include #include #include #ifdef CONFIG_INFINIBAND_QIB_DCA #include #endif #include "qib.h" #include "qib_7322_regs.h" #include "qib_qsfp.h" #include "qib_mad.h" #include "qib_verbs.h" #undef pr_fmt #define pr_fmt(fmt) QIB_DRV_NAME " " fmt static void qib_setup_7322_setextled(struct qib_pportdata *, u32); static void qib_7322_handle_hwerrors(struct qib_devdata *, char *, size_t); static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op); static irqreturn_t qib_7322intr(int irq, void *data); static irqreturn_t qib_7322bufavail(int irq, void *data); static irqreturn_t sdma_intr(int irq, void *data); static irqreturn_t sdma_idle_intr(int irq, void *data); static irqreturn_t sdma_progress_intr(int irq, void *data); static irqreturn_t sdma_cleanup_intr(int irq, void *data); static void qib_7322_txchk_change(struct qib_devdata *, u32, u32, u32, struct qib_ctxtdata *rcd); static u8 qib_7322_phys_portstate(u64); static u32 qib_7322_iblink_state(u64); static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, u16 linitcmd); static void force_h1(struct qib_pportdata *); static void adj_tx_serdes(struct qib_pportdata *); static u32 qib_7322_setpbc_control(struct qib_pportdata *, u32, u8, u8); static void qib_7322_mini_pcs_reset(struct qib_pportdata *); static u32 ahb_mod(struct qib_devdata *, int, int, int, u32, u32); static void ibsd_wr_allchans(struct qib_pportdata *, int, unsigned, unsigned); static void serdes_7322_los_enable(struct qib_pportdata *, int); static int serdes_7322_init_old(struct qib_pportdata *); static int serdes_7322_init_new(struct qib_pportdata *); static void dump_sdma_7322_state(struct qib_pportdata *); #define BMASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb)) /* LE2 serdes values for different cases */ #define LE2_DEFAULT 5 #define LE2_5m 4 #define LE2_QME 0 /* Below is special-purpose, so only really works for the IB SerDes blocks. */ #define IBSD(hw_pidx) (hw_pidx + 2) /* these are variables for documentation and experimentation purposes */ static const unsigned rcv_int_timeout = 375; static const unsigned rcv_int_count = 16; static const unsigned sdma_idle_cnt = 64; /* Time to stop altering Rx Equalization parameters, after link up. */ #define RXEQ_DISABLE_MSECS 2500 /* * Number of VLs we are configured to use (to allow for more * credits per vl, etc.) */ ushort qib_num_cfg_vls = 2; module_param_named(num_vls, qib_num_cfg_vls, ushort, S_IRUGO); MODULE_PARM_DESC(num_vls, "Set number of Virtual Lanes to use (1-8)"); static ushort qib_chase = 1; module_param_named(chase, qib_chase, ushort, S_IRUGO); MODULE_PARM_DESC(chase, "Enable state chase handling"); static ushort qib_long_atten = 10; /* 10 dB ~= 5m length */ module_param_named(long_attenuation, qib_long_atten, ushort, S_IRUGO); MODULE_PARM_DESC(long_attenuation, "attenuation cutoff (dB) for long copper cable setup"); static ushort qib_singleport; module_param_named(singleport, qib_singleport, ushort, S_IRUGO); MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); static ushort qib_krcvq01_no_msi; module_param_named(krcvq01_no_msi, qib_krcvq01_no_msi, ushort, S_IRUGO); MODULE_PARM_DESC(krcvq01_no_msi, "No MSI for kctx < 2"); /* * Receive header queue sizes */ static unsigned qib_rcvhdrcnt; module_param_named(rcvhdrcnt, qib_rcvhdrcnt, uint, S_IRUGO); MODULE_PARM_DESC(rcvhdrcnt, "receive header count"); static unsigned qib_rcvhdrsize; module_param_named(rcvhdrsize, qib_rcvhdrsize, uint, S_IRUGO); MODULE_PARM_DESC(rcvhdrsize, "receive header size in 32-bit words"); static unsigned qib_rcvhdrentsize; module_param_named(rcvhdrentsize, qib_rcvhdrentsize, uint, S_IRUGO); MODULE_PARM_DESC(rcvhdrentsize, "receive header entry size in 32-bit words"); #define MAX_ATTEN_LEN 64 /* plenty for any real system */ /* for read back, default index is ~5m copper cable */ static char txselect_list[MAX_ATTEN_LEN] = "10"; static struct kparam_string kp_txselect = { .string = txselect_list, .maxlen = MAX_ATTEN_LEN }; static int setup_txselect(const char *, struct kernel_param *); module_param_call(txselect, setup_txselect, param_get_string, &kp_txselect, S_IWUSR | S_IRUGO); MODULE_PARM_DESC(txselect, "Tx serdes indices (for no QSFP or invalid QSFP data)"); #define BOARD_QME7342 5 #define BOARD_QMH7342 6 #define BOARD_QMH7360 9 #define IS_QMH(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ BOARD_QMH7342) #define IS_QME(dd) (SYM_FIELD((dd)->revision, Revision, BoardID) == \ BOARD_QME7342) #define KREG_IDX(regname) (QIB_7322_##regname##_OFFS / sizeof(u64)) #define KREG_IBPORT_IDX(regname) ((QIB_7322_##regname##_0_OFFS / sizeof(u64))) #define MASK_ACROSS(lsb, msb) \ (((1ULL << ((msb) + 1 - (lsb))) - 1) << (lsb)) #define SYM_RMASK(regname, fldname) ((u64) \ QIB_7322_##regname##_##fldname##_RMASK) #define SYM_MASK(regname, fldname) ((u64) \ QIB_7322_##regname##_##fldname##_RMASK << \ QIB_7322_##regname##_##fldname##_LSB) #define SYM_FIELD(value, regname, fldname) ((u64) \ (((value) >> SYM_LSB(regname, fldname)) & \ SYM_RMASK(regname, fldname))) /* useful for things like LaFifoEmpty_0...7, TxCreditOK_0...7, etc. */ #define SYM_FIELD_ACROSS(value, regname, fldname, nbits) \ (((value) >> SYM_LSB(regname, fldname)) & MASK_ACROSS(0, nbits)) #define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) #define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) #define ERR_MASK_N(fldname) SYM_MASK(ErrMask_0, fldname##Mask) #define INT_MASK(fldname) SYM_MASK(IntMask, fldname##IntMask) #define INT_MASK_P(fldname, port) SYM_MASK(IntMask, fldname##IntMask##_##port) /* Below because most, but not all, fields of IntMask have that full suffix */ #define INT_MASK_PM(fldname, port) SYM_MASK(IntMask, fldname##Mask##_##port) #define SYM_LSB(regname, fldname) (QIB_7322_##regname##_##fldname##_LSB) /* * the size bits give us 2^N, in KB units. 0 marks as invalid, * and 7 is reserved. We currently use only 2KB and 4KB */ #define IBA7322_TID_SZ_SHIFT QIB_7322_RcvTIDArray0_RT_BufSize_LSB #define IBA7322_TID_SZ_2K (1UL<kregbase || !(dd->flags & QIB_PRESENT)) return 0; return readl(regno + (u64 __iomem *)( (dd->ureg_align * ctxt) + (dd->userbase ? (char __iomem *)dd->userbase : (char __iomem *)dd->kregbase + dd->uregbase))); } /** * qib_read_ureg - read virtualized per-context register * @dd: device * @regno: register number * @ctxt: context number * * Return the contents of a register that is virtualized to be per context. * Returns -1 on errors (not distinguishable from valid contents at * runtime; we may add a separate error variable at some point). */ static inline u64 qib_read_ureg(const struct qib_devdata *dd, enum qib_ureg regno, int ctxt) { if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) return 0; return readq(regno + (u64 __iomem *)( (dd->ureg_align * ctxt) + (dd->userbase ? (char __iomem *)dd->userbase : (char __iomem *)dd->kregbase + dd->uregbase))); } /** * qib_write_ureg - write virtualized per-context register * @dd: device * @regno: register number * @value: value * @ctxt: context * * Write the contents of a register that is virtualized to be per context. */ static inline void qib_write_ureg(const struct qib_devdata *dd, enum qib_ureg regno, u64 value, int ctxt) { u64 __iomem *ubase; if (dd->userbase) ubase = (u64 __iomem *) ((char __iomem *) dd->userbase + dd->ureg_align * ctxt); else ubase = (u64 __iomem *) (dd->uregbase + (char __iomem *) dd->kregbase + dd->ureg_align * ctxt); if (dd->kregbase && (dd->flags & QIB_PRESENT)) writeq(value, &ubase[regno]); } static inline u32 qib_read_kreg32(const struct qib_devdata *dd, const u32 regno) { if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) return -1; return readl((u32 __iomem *) &dd->kregbase[regno]); } static inline u64 qib_read_kreg64(const struct qib_devdata *dd, const u32 regno) { if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) return -1; return readq(&dd->kregbase[regno]); } static inline void qib_write_kreg(const struct qib_devdata *dd, const u32 regno, u64 value) { if (dd->kregbase && (dd->flags & QIB_PRESENT)) writeq(value, &dd->kregbase[regno]); } /* * not many sanity checks for the port-specific kernel register routines, * since they are only used when it's known to be safe. */ static inline u64 qib_read_kreg_port(const struct qib_pportdata *ppd, const u16 regno) { if (!ppd->cpspec->kpregbase || !(ppd->dd->flags & QIB_PRESENT)) return 0ULL; return readq(&ppd->cpspec->kpregbase[regno]); } static inline void qib_write_kreg_port(const struct qib_pportdata *ppd, const u16 regno, u64 value) { if (ppd->cpspec && ppd->dd && ppd->cpspec->kpregbase && (ppd->dd->flags & QIB_PRESENT)) writeq(value, &ppd->cpspec->kpregbase[regno]); } /** * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register * @dd: the qlogic_ib device * @regno: the register number to write * @ctxt: the context containing the register * @value: the value to write */ static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, const u16 regno, unsigned ctxt, u64 value) { qib_write_kreg(dd, regno + ctxt, value); } static inline u64 read_7322_creg(const struct qib_devdata *dd, u16 regno) { if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) return 0; return readq(&dd->cspec->cregbase[regno]); } static inline u32 read_7322_creg32(const struct qib_devdata *dd, u16 regno) { if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) return 0; return readl(&dd->cspec->cregbase[regno]); } static inline void write_7322_creg_port(const struct qib_pportdata *ppd, u16 regno, u64 value) { if (ppd->cpspec && ppd->cpspec->cpregbase && (ppd->dd->flags & QIB_PRESENT)) writeq(value, &ppd->cpspec->cpregbase[regno]); } static inline u64 read_7322_creg_port(const struct qib_pportdata *ppd, u16 regno) { if (!ppd->cpspec || !ppd->cpspec->cpregbase || !(ppd->dd->flags & QIB_PRESENT)) return 0; return readq(&ppd->cpspec->cpregbase[regno]); } static inline u32 read_7322_creg32_port(const struct qib_pportdata *ppd, u16 regno) { if (!ppd->cpspec || !ppd->cpspec->cpregbase || !(ppd->dd->flags & QIB_PRESENT)) return 0; return readl(&ppd->cpspec->cpregbase[regno]); } /* bits in Control register */ #define QLOGIC_IB_C_RESET SYM_MASK(Control, SyncReset) #define QLOGIC_IB_C_SDMAFETCHPRIOEN SYM_MASK(Control, SDmaDescFetchPriorityEn) /* bits in general interrupt regs */ #define QIB_I_RCVURG_LSB SYM_LSB(IntMask, RcvUrg0IntMask) #define QIB_I_RCVURG_RMASK MASK_ACROSS(0, 17) #define QIB_I_RCVURG_MASK (QIB_I_RCVURG_RMASK << QIB_I_RCVURG_LSB) #define QIB_I_RCVAVAIL_LSB SYM_LSB(IntMask, RcvAvail0IntMask) #define QIB_I_RCVAVAIL_RMASK MASK_ACROSS(0, 17) #define QIB_I_RCVAVAIL_MASK (QIB_I_RCVAVAIL_RMASK << QIB_I_RCVAVAIL_LSB) #define QIB_I_C_ERROR INT_MASK(Err) #define QIB_I_SPIOSENT (INT_MASK_P(SendDone, 0) | INT_MASK_P(SendDone, 1)) #define QIB_I_SPIOBUFAVAIL INT_MASK(SendBufAvail) #define QIB_I_GPIO INT_MASK(AssertGPIO) #define QIB_I_P_SDMAINT(pidx) \ (INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ INT_MASK_P(SDmaProgress, pidx) | \ INT_MASK_PM(SDmaCleanupDone, pidx)) /* Interrupt bits that are "per port" */ #define QIB_I_P_BITSEXTANT(pidx) \ (INT_MASK_P(Err, pidx) | INT_MASK_P(SendDone, pidx) | \ INT_MASK_P(SDma, pidx) | INT_MASK_P(SDmaIdle, pidx) | \ INT_MASK_P(SDmaProgress, pidx) | \ INT_MASK_PM(SDmaCleanupDone, pidx)) /* Interrupt bits that are common to a device */ /* currently unused: QIB_I_SPIOSENT */ #define QIB_I_C_BITSEXTANT \ (QIB_I_RCVURG_MASK | QIB_I_RCVAVAIL_MASK | \ QIB_I_SPIOSENT | \ QIB_I_C_ERROR | QIB_I_SPIOBUFAVAIL | QIB_I_GPIO) #define QIB_I_BITSEXTANT (QIB_I_C_BITSEXTANT | \ QIB_I_P_BITSEXTANT(0) | QIB_I_P_BITSEXTANT(1)) /* * Error bits that are "per port". */ #define QIB_E_P_IBSTATUSCHANGED ERR_MASK_N(IBStatusChanged) #define QIB_E_P_SHDR ERR_MASK_N(SHeadersErr) #define QIB_E_P_VL15_BUF_MISUSE ERR_MASK_N(VL15BufMisuseErr) #define QIB_E_P_SND_BUF_MISUSE ERR_MASK_N(SendBufMisuseErr) #define QIB_E_P_SUNSUPVL ERR_MASK_N(SendUnsupportedVLErr) #define QIB_E_P_SUNEXP_PKTNUM ERR_MASK_N(SendUnexpectedPktNumErr) #define QIB_E_P_SDROP_DATA ERR_MASK_N(SendDroppedDataPktErr) #define QIB_E_P_SDROP_SMP ERR_MASK_N(SendDroppedSmpPktErr) #define QIB_E_P_SPKTLEN ERR_MASK_N(SendPktLenErr) #define QIB_E_P_SUNDERRUN ERR_MASK_N(SendUnderRunErr) #define QIB_E_P_SMAXPKTLEN ERR_MASK_N(SendMaxPktLenErr) #define QIB_E_P_SMINPKTLEN ERR_MASK_N(SendMinPktLenErr) #define QIB_E_P_RIBLOSTLINK ERR_MASK_N(RcvIBLostLinkErr) #define QIB_E_P_RHDR ERR_MASK_N(RcvHdrErr) #define QIB_E_P_RHDRLEN ERR_MASK_N(RcvHdrLenErr) #define QIB_E_P_RBADTID ERR_MASK_N(RcvBadTidErr) #define QIB_E_P_RBADVERSION ERR_MASK_N(RcvBadVersionErr) #define QIB_E_P_RIBFLOW ERR_MASK_N(RcvIBFlowErr) #define QIB_E_P_REBP ERR_MASK_N(RcvEBPErr) #define QIB_E_P_RUNSUPVL ERR_MASK_N(RcvUnsupportedVLErr) #define QIB_E_P_RUNEXPCHAR ERR_MASK_N(RcvUnexpectedCharErr) #define QIB_E_P_RSHORTPKTLEN ERR_MASK_N(RcvShortPktLenErr) #define QIB_E_P_RLONGPKTLEN ERR_MASK_N(RcvLongPktLenErr) #define QIB_E_P_RMAXPKTLEN ERR_MASK_N(RcvMaxPktLenErr) #define QIB_E_P_RMINPKTLEN ERR_MASK_N(RcvMinPktLenErr) #define QIB_E_P_RICRC ERR_MASK_N(RcvICRCErr) #define QIB_E_P_RVCRC ERR_MASK_N(RcvVCRCErr) #define QIB_E_P_RFORMATERR ERR_MASK_N(RcvFormatErr) #define QIB_E_P_SDMA1STDESC ERR_MASK_N(SDma1stDescErr) #define QIB_E_P_SDMABASE ERR_MASK_N(SDmaBaseErr) #define QIB_E_P_SDMADESCADDRMISALIGN ERR_MASK_N(SDmaDescAddrMisalignErr) #define QIB_E_P_SDMADWEN ERR_MASK_N(SDmaDwEnErr) #define QIB_E_P_SDMAGENMISMATCH ERR_MASK_N(SDmaGenMismatchErr) #define QIB_E_P_SDMAHALT ERR_MASK_N(SDmaHaltErr) #define QIB_E_P_SDMAMISSINGDW ERR_MASK_N(SDmaMissingDwErr) #define QIB_E_P_SDMAOUTOFBOUND ERR_MASK_N(SDmaOutOfBoundErr) #define QIB_E_P_SDMARPYTAG ERR_MASK_N(SDmaRpyTagErr) #define QIB_E_P_SDMATAILOUTOFBOUND ERR_MASK_N(SDmaTailOutOfBoundErr) #define QIB_E_P_SDMAUNEXPDATA ERR_MASK_N(SDmaUnexpDataErr) /* Error bits that are common to a device */ #define QIB_E_RESET ERR_MASK(ResetNegated) #define QIB_E_HARDWARE ERR_MASK(HardwareErr) #define QIB_E_INVALIDADDR ERR_MASK(InvalidAddrErr) /* * Per chip (rather than per-port) errors. Most either do * nothing but trigger a print (because they self-recover, or * always occur in tandem with other errors that handle the * issue), or because they indicate errors with no recovery, * but we want to know that they happened. */ #define QIB_E_SBUF_VL15_MISUSE ERR_MASK(SBufVL15MisUseErr) #define QIB_E_BADEEP ERR_MASK(InvalidEEPCmd) #define QIB_E_VLMISMATCH ERR_MASK(SendVLMismatchErr) #define QIB_E_ARMLAUNCH ERR_MASK(SendArmLaunchErr) #define QIB_E_SPCLTRIG ERR_MASK(SendSpecialTriggerErr) #define QIB_E_RRCVHDRFULL ERR_MASK(RcvHdrFullErr) #define QIB_E_RRCVEGRFULL ERR_MASK(RcvEgrFullErr) #define QIB_E_RCVCTXTSHARE ERR_MASK(RcvContextShareErr) /* SDMA chip errors (not per port) * QIB_E_SDMA_BUF_DUP needs no special handling, because we will also get * the SDMAHALT error immediately, so we just print the dup error via the * E_AUTO mechanism. This is true of most of the per-port fatal errors * as well, but since this is port-independent, by definition, it's * handled a bit differently. SDMA_VL15 and SDMA_WRONG_PORT are per * packet send errors, and so are handled in the same manner as other * per-packet errors. */ #define QIB_E_SDMA_VL15 ERR_MASK(SDmaVL15Err) #define QIB_E_SDMA_WRONG_PORT ERR_MASK(SDmaWrongPortErr) #define QIB_E_SDMA_BUF_DUP ERR_MASK(SDmaBufMaskDuplicateErr) /* * Below functionally equivalent to legacy QLOGIC_IB_E_PKTERRS * it is used to print "common" packet errors. */ #define QIB_E_P_PKTERRS (QIB_E_P_SPKTLEN |\ QIB_E_P_SDROP_DATA | QIB_E_P_RVCRC |\ QIB_E_P_RICRC | QIB_E_P_RSHORTPKTLEN |\ QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ QIB_E_P_REBP) /* Error Bits that Packet-related (Receive, per-port) */ #define QIB_E_P_RPKTERRS (\ QIB_E_P_RHDRLEN | QIB_E_P_RBADTID | \ QIB_E_P_RBADVERSION | QIB_E_P_RHDR | \ QIB_E_P_RLONGPKTLEN | QIB_E_P_RSHORTPKTLEN |\ QIB_E_P_RMAXPKTLEN | QIB_E_P_RMINPKTLEN | \ QIB_E_P_RFORMATERR | QIB_E_P_RUNSUPVL | \ QIB_E_P_RUNEXPCHAR | QIB_E_P_RIBFLOW | QIB_E_P_REBP) /* * Error bits that are Send-related (per port) * (ARMLAUNCH excluded from E_SPKTERRS because it gets special handling). * All of these potentially need to have a buffer disarmed */ #define QIB_E_P_SPKTERRS (\ QIB_E_P_SUNEXP_PKTNUM |\ QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ QIB_E_P_SMAXPKTLEN |\ QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SHDR | \ QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN | \ QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNSUPVL) #define QIB_E_SPKTERRS ( \ QIB_E_SBUF_VL15_MISUSE | QIB_E_VLMISMATCH | \ ERR_MASK_N(SendUnsupportedVLErr) | \ QIB_E_SPCLTRIG | QIB_E_SDMA_VL15 | QIB_E_SDMA_WRONG_PORT) #define QIB_E_P_SDMAERRS ( \ QIB_E_P_SDMAHALT | \ QIB_E_P_SDMADESCADDRMISALIGN | \ QIB_E_P_SDMAUNEXPDATA | \ QIB_E_P_SDMAMISSINGDW | \ QIB_E_P_SDMADWEN | \ QIB_E_P_SDMARPYTAG | \ QIB_E_P_SDMA1STDESC | \ QIB_E_P_SDMABASE | \ QIB_E_P_SDMATAILOUTOFBOUND | \ QIB_E_P_SDMAOUTOFBOUND | \ QIB_E_P_SDMAGENMISMATCH) /* * This sets some bits more than once, but makes it more obvious which * bits are not handled under other categories, and the repeat definition * is not a problem. */ #define QIB_E_P_BITSEXTANT ( \ QIB_E_P_SPKTERRS | QIB_E_P_PKTERRS | QIB_E_P_RPKTERRS | \ QIB_E_P_RIBLOSTLINK | QIB_E_P_IBSTATUSCHANGED | \ QIB_E_P_SND_BUF_MISUSE | QIB_E_P_SUNDERRUN | \ QIB_E_P_SHDR | QIB_E_P_VL15_BUF_MISUSE | QIB_E_P_SDMAERRS \ ) /* * These are errors that can occur when the link * changes state while a packet is being sent or received. This doesn't * cover things like EBP or VCRC that can be the result of a sending * having the link change state, so we receive a "known bad" packet. * All of these are "per port", so renamed: */ #define QIB_E_P_LINK_PKTERRS (\ QIB_E_P_SDROP_DATA | QIB_E_P_SDROP_SMP |\ QIB_E_P_SMINPKTLEN | QIB_E_P_SPKTLEN |\ QIB_E_P_RSHORTPKTLEN | QIB_E_P_RMINPKTLEN |\ QIB_E_P_RUNEXPCHAR) /* * This sets some bits more than once, but makes it more obvious which * bits are not handled under other categories (such as QIB_E_SPKTERRS), * and the repeat definition is not a problem. */ #define QIB_E_C_BITSEXTANT (\ QIB_E_HARDWARE | QIB_E_INVALIDADDR | QIB_E_BADEEP |\ QIB_E_ARMLAUNCH | QIB_E_VLMISMATCH | QIB_E_RRCVHDRFULL |\ QIB_E_RRCVEGRFULL | QIB_E_RESET | QIB_E_SBUF_VL15_MISUSE) /* Likewise Neuter E_SPKT_ERRS_IGNORE */ #define E_SPKT_ERRS_IGNORE 0 #define QIB_EXTS_MEMBIST_DISABLED \ SYM_MASK(EXTStatus, MemBISTDisabled) #define QIB_EXTS_MEMBIST_ENDTEST \ SYM_MASK(EXTStatus, MemBISTEndTest) #define QIB_E_SPIOARMLAUNCH \ ERR_MASK(SendArmLaunchErr) #define IBA7322_IBCC_LINKINITCMD_MASK SYM_RMASK(IBCCtrlA_0, LinkInitCmd) #define IBA7322_IBCC_LINKCMD_SHIFT SYM_LSB(IBCCtrlA_0, LinkCmd) /* * IBTA_1_2 is set when multiple speeds are enabled (normal), * and also if forced QDR (only QDR enabled). It's enabled for the * forced QDR case so that scrambling will be enabled by the TS3 * exchange, when supported by both sides of the link. */ #define IBA7322_IBC_IBTA_1_2_MASK SYM_MASK(IBCCtrlB_0, IB_ENHANCED_MODE) #define IBA7322_IBC_MAX_SPEED_MASK SYM_MASK(IBCCtrlB_0, SD_SPEED) #define IBA7322_IBC_SPEED_QDR SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR) #define IBA7322_IBC_SPEED_DDR SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) #define IBA7322_IBC_SPEED_SDR SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) #define IBA7322_IBC_SPEED_MASK (SYM_MASK(IBCCtrlB_0, SD_SPEED_SDR) | \ SYM_MASK(IBCCtrlB_0, SD_SPEED_DDR) | SYM_MASK(IBCCtrlB_0, SD_SPEED_QDR)) #define IBA7322_IBC_SPEED_LSB SYM_LSB(IBCCtrlB_0, SD_SPEED_SDR) #define IBA7322_LEDBLINK_OFF_SHIFT SYM_LSB(RcvPktLEDCnt_0, OFFperiod) #define IBA7322_LEDBLINK_ON_SHIFT SYM_LSB(RcvPktLEDCnt_0, ONperiod) #define IBA7322_IBC_WIDTH_AUTONEG SYM_MASK(IBCCtrlB_0, IB_NUM_CHANNELS) #define IBA7322_IBC_WIDTH_4X_ONLY (1<> \ SYM_LSB(IBCCtrlB_0, HRTBT_ENB)) #define IBA7322_IBC_HRTBT_LSB SYM_LSB(IBCCtrlB_0, HRTBT_ENB) #define IBA7322_REDIRECT_VEC_PER_REG 12 #define IBA7322_SENDCHK_PKEY SYM_MASK(SendCheckControl_0, PKey_En) #define IBA7322_SENDCHK_BTHQP SYM_MASK(SendCheckControl_0, BTHQP_En) #define IBA7322_SENDCHK_SLID SYM_MASK(SendCheckControl_0, SLID_En) #define IBA7322_SENDCHK_RAW_IPV6 SYM_MASK(SendCheckControl_0, RawIPV6_En) #define IBA7322_SENDCHK_MINSZ SYM_MASK(SendCheckControl_0, PacketTooSmall_En) #define AUTONEG_TRIES 3 /* sequential retries to negotiate DDR */ #define HWE_AUTO(fldname) { .mask = SYM_MASK(HwErrMask, fldname##Mask), \ .msg = #fldname , .sz = sizeof(#fldname) } #define HWE_AUTO_P(fldname, port) { .mask = SYM_MASK(HwErrMask, \ fldname##Mask##_##port), .msg = #fldname , .sz = sizeof(#fldname) } static const struct qib_hwerror_msgs qib_7322_hwerror_msgs[] = { HWE_AUTO_P(IBSerdesPClkNotDetect, 1), HWE_AUTO_P(IBSerdesPClkNotDetect, 0), HWE_AUTO(PCIESerdesPClkNotDetect), HWE_AUTO(PowerOnBISTFailed), HWE_AUTO(TempsenseTholdReached), HWE_AUTO(MemoryErr), HWE_AUTO(PCIeBusParityErr), HWE_AUTO(PcieCplTimeout), HWE_AUTO(PciePoisonedTLP), HWE_AUTO_P(SDmaMemReadErr, 1), HWE_AUTO_P(SDmaMemReadErr, 0), HWE_AUTO_P(IBCBusFromSPCParityErr, 1), HWE_AUTO_P(IBCBusToSPCParityErr, 1), HWE_AUTO_P(IBCBusFromSPCParityErr, 0), HWE_AUTO(statusValidNoEop), HWE_AUTO(LATriggered), { .mask = 0, .sz = 0 } }; #define E_AUTO(fldname) { .mask = SYM_MASK(ErrMask, fldname##Mask), \ .msg = #fldname, .sz = sizeof(#fldname) } #define E_P_AUTO(fldname) { .mask = SYM_MASK(ErrMask_0, fldname##Mask), \ .msg = #fldname, .sz = sizeof(#fldname) } static const struct qib_hwerror_msgs qib_7322error_msgs[] = { E_AUTO(RcvEgrFullErr), E_AUTO(RcvHdrFullErr), E_AUTO(ResetNegated), E_AUTO(HardwareErr), E_AUTO(InvalidAddrErr), E_AUTO(SDmaVL15Err), E_AUTO(SBufVL15MisUseErr), E_AUTO(InvalidEEPCmd), E_AUTO(RcvContextShareErr), E_AUTO(SendVLMismatchErr), E_AUTO(SendArmLaunchErr), E_AUTO(SendSpecialTriggerErr), E_AUTO(SDmaWrongPortErr), E_AUTO(SDmaBufMaskDuplicateErr), { .mask = 0, .sz = 0 } }; static const struct qib_hwerror_msgs qib_7322p_error_msgs[] = { E_P_AUTO(IBStatusChanged), E_P_AUTO(SHeadersErr), E_P_AUTO(VL15BufMisuseErr), /* * SDmaHaltErr is not really an error, make it clearer; */ {.mask = SYM_MASK(ErrMask_0, SDmaHaltErrMask), .msg = "SDmaHalted", .sz = 11}, E_P_AUTO(SDmaDescAddrMisalignErr), E_P_AUTO(SDmaUnexpDataErr), E_P_AUTO(SDmaMissingDwErr), E_P_AUTO(SDmaDwEnErr), E_P_AUTO(SDmaRpyTagErr), E_P_AUTO(SDma1stDescErr), E_P_AUTO(SDmaBaseErr), E_P_AUTO(SDmaTailOutOfBoundErr), E_P_AUTO(SDmaOutOfBoundErr), E_P_AUTO(SDmaGenMismatchErr), E_P_AUTO(SendBufMisuseErr), E_P_AUTO(SendUnsupportedVLErr), E_P_AUTO(SendUnexpectedPktNumErr), E_P_AUTO(SendDroppedDataPktErr), E_P_AUTO(SendDroppedSmpPktErr), E_P_AUTO(SendPktLenErr), E_P_AUTO(SendUnderRunErr), E_P_AUTO(SendMaxPktLenErr), E_P_AUTO(SendMinPktLenErr), E_P_AUTO(RcvIBLostLinkErr), E_P_AUTO(RcvHdrErr), E_P_AUTO(RcvHdrLenErr), E_P_AUTO(RcvBadTidErr), E_P_AUTO(RcvBadVersionErr), E_P_AUTO(RcvIBFlowErr), E_P_AUTO(RcvEBPErr), E_P_AUTO(RcvUnsupportedVLErr), E_P_AUTO(RcvUnexpectedCharErr), E_P_AUTO(RcvShortPktLenErr), E_P_AUTO(RcvLongPktLenErr), E_P_AUTO(RcvMaxPktLenErr), E_P_AUTO(RcvMinPktLenErr), E_P_AUTO(RcvICRCErr), E_P_AUTO(RcvVCRCErr), E_P_AUTO(RcvFormatErr), { .mask = 0, .sz = 0 } }; /* * Below generates "auto-message" for interrupts not specific to any port or * context */ #define INTR_AUTO(fldname) { .mask = SYM_MASK(IntMask, fldname##Mask), \ .msg = #fldname, .sz = sizeof(#fldname) } /* Below generates "auto-message" for interrupts specific to a port */ #define INTR_AUTO_P(fldname) { .mask = MASK_ACROSS(\ SYM_LSB(IntMask, fldname##Mask##_0), \ SYM_LSB(IntMask, fldname##Mask##_1)), \ .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } /* For some reason, the SerDesTrimDone bits are reversed */ #define INTR_AUTO_PI(fldname) { .mask = MASK_ACROSS(\ SYM_LSB(IntMask, fldname##Mask##_1), \ SYM_LSB(IntMask, fldname##Mask##_0)), \ .msg = #fldname "_P", .sz = sizeof(#fldname "_P") } /* * Below generates "auto-message" for interrupts specific to a context, * with ctxt-number appended */ #define INTR_AUTO_C(fldname) { .mask = MASK_ACROSS(\ SYM_LSB(IntMask, fldname##0IntMask), \ SYM_LSB(IntMask, fldname##17IntMask)), \ .msg = #fldname "_C", .sz = sizeof(#fldname "_C") } #define TXSYMPTOM_AUTO_P(fldname) \ { .mask = SYM_MASK(SendHdrErrSymptom_0, fldname), \ .msg = #fldname, .sz = sizeof(#fldname) } static const struct qib_hwerror_msgs hdrchk_msgs[] = { TXSYMPTOM_AUTO_P(NonKeyPacket), TXSYMPTOM_AUTO_P(GRHFail), TXSYMPTOM_AUTO_P(PkeyFail), TXSYMPTOM_AUTO_P(QPFail), TXSYMPTOM_AUTO_P(SLIDFail), TXSYMPTOM_AUTO_P(RawIPV6), TXSYMPTOM_AUTO_P(PacketTooSmall), { .mask = 0, .sz = 0 } }; #define IBA7322_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */ /* * Called when we might have an error that is specific to a particular * PIO buffer, and may need to cancel that buffer, so it can be re-used, * because we don't need to force the update of pioavail */ static void qib_disarm_7322_senderrbufs(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; u32 i; int any; u32 piobcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; u32 regcnt = (piobcnt + BITS_PER_LONG - 1) / BITS_PER_LONG; unsigned long sbuf[4]; /* * It's possible that sendbuffererror could have bits set; might * have already done this as a result of hardware error handling. */ any = 0; for (i = 0; i < regcnt; ++i) { sbuf[i] = qib_read_kreg64(dd, kr_sendbuffererror + i); if (sbuf[i]) { any = 1; qib_write_kreg(dd, kr_sendbuffererror + i, sbuf[i]); } } if (any) qib_disarm_piobufs_set(dd, sbuf, piobcnt); } /* No txe_recover yet, if ever */ /* No decode__errors yet */ static void err_decode(char *msg, size_t len, u64 errs, const struct qib_hwerror_msgs *msp) { u64 these, lmask; int took, multi, n = 0; while (errs && msp && msp->mask) { multi = (msp->mask & (msp->mask - 1)); while (errs & msp->mask) { these = (errs & msp->mask); lmask = (these & (these - 1)) ^ these; if (len) { if (n++) { /* separate the strings */ *msg++ = ','; len--; } BUG_ON(!msp->sz); /* msp->sz counts the nul */ took = min_t(size_t, msp->sz - (size_t)1, len); memcpy(msg, msp->msg, took); len -= took; msg += took; if (len) *msg = '\0'; } errs &= ~lmask; if (len && multi) { /* More than one bit this mask */ int idx = -1; while (lmask & msp->mask) { ++idx; lmask >>= 1; } took = scnprintf(msg, len, "_%d", idx); len -= took; msg += took; } } ++msp; } /* If some bits are left, show in hex. */ if (len && errs) snprintf(msg, len, "%sMORE:%llX", n ? "," : "", (unsigned long long) errs); } /* only called if r1 set */ static void flush_fifo(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; u32 __iomem *piobuf; u32 bufn; u32 *hdr; u64 pbc; const unsigned hdrwords = 7; static struct ib_header ibhdr = { .lrh[0] = cpu_to_be16(0xF000 | QIB_LRH_BTH), .lrh[1] = IB_LID_PERMISSIVE, .lrh[2] = cpu_to_be16(hdrwords + SIZE_OF_CRC), .lrh[3] = IB_LID_PERMISSIVE, .u.oth.bth[0] = cpu_to_be32( (IB_OPCODE_UD_SEND_ONLY << 24) | QIB_DEFAULT_P_KEY), .u.oth.bth[1] = cpu_to_be32(0), .u.oth.bth[2] = cpu_to_be32(0), .u.oth.u.ud.deth[0] = cpu_to_be32(0), .u.oth.u.ud.deth[1] = cpu_to_be32(0), }; /* * Send a dummy VL15 packet to flush the launch FIFO. * This will not actually be sent since the TxeBypassIbc bit is set. */ pbc = PBC_7322_VL15_SEND | (((u64)ppd->hw_pidx) << (PBC_PORT_SEL_LSB + 32)) | (hdrwords + SIZE_OF_CRC); piobuf = qib_7322_getsendbuf(ppd, pbc, &bufn); if (!piobuf) return; writeq(pbc, piobuf); hdr = (u32 *) &ibhdr; if (dd->flags & QIB_PIO_FLUSH_WC) { qib_flush_wc(); qib_pio_copy(piobuf + 2, hdr, hdrwords - 1); qib_flush_wc(); __raw_writel(hdr[hdrwords - 1], piobuf + hdrwords + 1); qib_flush_wc(); } else qib_pio_copy(piobuf + 2, hdr, hdrwords); qib_sendbuf_done(dd, bufn); } /* * This is called with interrupts disabled and sdma_lock held. */ static void qib_7322_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) { struct qib_devdata *dd = ppd->dd; u64 set_sendctrl = 0; u64 clr_sendctrl = 0; if (op & QIB_SDMA_SENDCTRL_OP_ENABLE) set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); else clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaEnable); if (op & QIB_SDMA_SENDCTRL_OP_INTENABLE) set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); else clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaIntEnable); if (op & QIB_SDMA_SENDCTRL_OP_HALT) set_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); else clr_sendctrl |= SYM_MASK(SendCtrl_0, SDmaHalt); if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) set_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | SYM_MASK(SendCtrl_0, TxeAbortIbc) | SYM_MASK(SendCtrl_0, TxeDrainRmFifo); else clr_sendctrl |= SYM_MASK(SendCtrl_0, TxeBypassIbc) | SYM_MASK(SendCtrl_0, TxeAbortIbc) | SYM_MASK(SendCtrl_0, TxeDrainRmFifo); spin_lock(&dd->sendctrl_lock); /* If we are draining everything, block sends first */ if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); qib_write_kreg(dd, kr_scratch, 0); } ppd->p_sendctrl |= set_sendctrl; ppd->p_sendctrl &= ~clr_sendctrl; if (op & QIB_SDMA_SENDCTRL_OP_CLEANUP) qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl | SYM_MASK(SendCtrl_0, SDmaCleanup)); else qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); qib_write_kreg(dd, kr_scratch, 0); if (op & QIB_SDMA_SENDCTRL_OP_DRAIN) { ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); qib_write_kreg(dd, kr_scratch, 0); } spin_unlock(&dd->sendctrl_lock); if ((op & QIB_SDMA_SENDCTRL_OP_DRAIN) && ppd->dd->cspec->r1) flush_fifo(ppd); } static void qib_7322_sdma_hw_clean_up(struct qib_pportdata *ppd) { __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); } static void qib_sdma_7322_setlengen(struct qib_pportdata *ppd) { /* * Set SendDmaLenGen and clear and set * the MSB of the generation count to enable generation checking * and load the internal generation counter. */ qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt); qib_write_kreg_port(ppd, krp_senddmalengen, ppd->sdma_descq_cnt | (1ULL << QIB_7322_SendDmaLenGen_0_Generation_MSB)); } /* * Must be called with sdma_lock held, or before init finished. */ static void qib_sdma_update_7322_tail(struct qib_pportdata *ppd, u16 tail) { /* Commit writes to memory and advance the tail on the chip */ wmb(); ppd->sdma_descq_tail = tail; qib_write_kreg_port(ppd, krp_senddmatail, tail); } /* * This is called with interrupts disabled and sdma_lock held. */ static void qib_7322_sdma_hw_start_up(struct qib_pportdata *ppd) { /* * Drain all FIFOs. * The hardware doesn't require this but we do it so that verbs * and user applications don't wait for link active to send stale * data. */ sendctrl_7322_mod(ppd, QIB_SENDCTRL_FLUSH); qib_sdma_7322_setlengen(ppd); qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ ppd->sdma_head_dma[0] = 0; qib_7322_sdma_sendctrl(ppd, ppd->sdma_state.current_op | QIB_SDMA_SENDCTRL_OP_CLEANUP); } #define DISABLES_SDMA ( \ QIB_E_P_SDMAHALT | \ QIB_E_P_SDMADESCADDRMISALIGN | \ QIB_E_P_SDMAMISSINGDW | \ QIB_E_P_SDMADWEN | \ QIB_E_P_SDMARPYTAG | \ QIB_E_P_SDMA1STDESC | \ QIB_E_P_SDMABASE | \ QIB_E_P_SDMATAILOUTOFBOUND | \ QIB_E_P_SDMAOUTOFBOUND | \ QIB_E_P_SDMAGENMISMATCH) static void sdma_7322_p_errors(struct qib_pportdata *ppd, u64 errs) { unsigned long flags; struct qib_devdata *dd = ppd->dd; errs &= QIB_E_P_SDMAERRS; err_decode(ppd->cpspec->sdmamsgbuf, sizeof(ppd->cpspec->sdmamsgbuf), errs, qib_7322p_error_msgs); if (errs & QIB_E_P_SDMAUNEXPDATA) qib_dev_err(dd, "IB%u:%u SDmaUnexpData\n", dd->unit, ppd->port); spin_lock_irqsave(&ppd->sdma_lock, flags); if (errs != QIB_E_P_SDMAHALT) { /* SDMA errors have QIB_E_P_SDMAHALT and another bit set */ qib_dev_porterr(dd, ppd->port, "SDMA %s 0x%016llx %s\n", qib_sdma_state_names[ppd->sdma_state.current_state], errs, ppd->cpspec->sdmamsgbuf); dump_sdma_7322_state(ppd); } switch (ppd->sdma_state.current_state) { case qib_sdma_state_s00_hw_down: break; case qib_sdma_state_s10_hw_start_up_wait: if (errs & QIB_E_P_SDMAHALT) __qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); break; case qib_sdma_state_s20_idle: break; case qib_sdma_state_s30_sw_clean_up_wait: break; case qib_sdma_state_s40_hw_clean_up_wait: if (errs & QIB_E_P_SDMAHALT) __qib_sdma_process_event(ppd, qib_sdma_event_e50_hw_cleaned); break; case qib_sdma_state_s50_hw_halt_wait: if (errs & QIB_E_P_SDMAHALT) __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); break; case qib_sdma_state_s99_running: __qib_sdma_process_event(ppd, qib_sdma_event_e7322_err_halted); __qib_sdma_process_event(ppd, qib_sdma_event_e60_hw_halted); break; } spin_unlock_irqrestore(&ppd->sdma_lock, flags); } /* * handle per-device errors (not per-port errors) */ static noinline void handle_7322_errors(struct qib_devdata *dd) { char *msg; u64 iserr = 0; u64 errs; u64 mask; int log_idx; qib_stats.sps_errints++; errs = qib_read_kreg64(dd, kr_errstatus); if (!errs) { qib_devinfo(dd->pcidev, "device error interrupt, but no error bits set!\n"); goto done; } /* don't report errors that are masked */ errs &= dd->cspec->errormask; msg = dd->cspec->emsgbuf; /* do these first, they are most important */ if (errs & QIB_E_HARDWARE) { *msg = '\0'; qib_7322_handle_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); } else for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx) if (errs & dd->eep_st_masks[log_idx].errs_to_log) qib_inc_eeprom_err(dd, log_idx, 1); if (errs & QIB_E_SPKTERRS) { qib_disarm_7322_senderrbufs(dd->pport); qib_stats.sps_txerrs++; } else if (errs & QIB_E_INVALIDADDR) qib_stats.sps_txerrs++; else if (errs & QIB_E_ARMLAUNCH) { qib_stats.sps_txerrs++; qib_disarm_7322_senderrbufs(dd->pport); } qib_write_kreg(dd, kr_errclear, errs); /* * The ones we mask off are handled specially below * or above. Also mask SDMADISABLED by default as it * is too chatty. */ mask = QIB_E_HARDWARE; *msg = '\0'; err_decode(msg, sizeof(dd->cspec->emsgbuf), errs & ~mask, qib_7322error_msgs); /* * Getting reset is a tragedy for all ports. Mark the device * _and_ the ports as "offline" in way meaningful to each. */ if (errs & QIB_E_RESET) { int pidx; qib_dev_err(dd, "Got reset, requires re-init (unload and reload driver)\n"); dd->flags &= ~QIB_INITTED; /* needs re-init */ /* mark as having had error */ *dd->devstatusp |= QIB_STATUS_HWERROR; for (pidx = 0; pidx < dd->num_pports; ++pidx) if (dd->pport[pidx].link_speed_supported) *dd->pport[pidx].statusp &= ~QIB_STATUS_IB_CONF; } if (*msg && iserr) qib_dev_err(dd, "%s error\n", msg); /* * If there were hdrq or egrfull errors, wake up any processes * waiting in poll. We used to try to check which contexts had * the overflow, but given the cost of that and the chip reads * to support it, it's better to just wake everybody up if we * get an overflow; waiters can poll again if it's not them. */ if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { qib_handle_urcv(dd, ~0U); if (errs & ERR_MASK(RcvEgrFullErr)) qib_stats.sps_buffull++; else qib_stats.sps_hdrfull++; } done: return; } static void qib_error_tasklet(unsigned long data) { struct qib_devdata *dd = (struct qib_devdata *)data; handle_7322_errors(dd); qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); } static void reenable_chase(struct timer_list *t) { struct qib_chippport_specific *cp = from_timer(cp, t, chase_timer); struct qib_pportdata *ppd = cp->ppd; ppd->cpspec->chase_timer.expires = 0; qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, QLOGIC_IB_IBCC_LINKINITCMD_POLL); } static void disable_chase(struct qib_pportdata *ppd, unsigned long tnow, u8 ibclt) { ppd->cpspec->chase_end = 0; if (!qib_chase) return; qib_set_ib_7322_lstate(ppd, QLOGIC_IB_IBCC_LINKCMD_DOWN, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); ppd->cpspec->chase_timer.expires = jiffies + QIB_CHASE_DIS_TIME; add_timer(&ppd->cpspec->chase_timer); } static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) { u8 ibclt; unsigned long tnow; ibclt = (u8)SYM_FIELD(ibcst, IBCStatusA_0, LinkTrainingState); /* * Detect and handle the state chase issue, where we can * get stuck if we are unlucky on timing on both sides of * the link. If we are, we disable, set a timer, and * then re-enable. */ switch (ibclt) { case IB_7322_LT_STATE_CFGRCVFCFG: case IB_7322_LT_STATE_CFGWAITRMT: case IB_7322_LT_STATE_TXREVLANES: case IB_7322_LT_STATE_CFGENH: tnow = jiffies; if (ppd->cpspec->chase_end && time_after(tnow, ppd->cpspec->chase_end)) disable_chase(ppd, tnow, ibclt); else if (!ppd->cpspec->chase_end) ppd->cpspec->chase_end = tnow + QIB_CHASE_TIME; break; default: ppd->cpspec->chase_end = 0; break; } if (((ibclt >= IB_7322_LT_STATE_CFGTEST && ibclt <= IB_7322_LT_STATE_CFGWAITENH) || ibclt == IB_7322_LT_STATE_LINKUP) && (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { force_h1(ppd); ppd->cpspec->qdr_reforce = 1; if (!ppd->dd->cspec->r1) serdes_7322_los_enable(ppd, 0); } else if (ppd->cpspec->qdr_reforce && (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) && (ibclt == IB_7322_LT_STATE_CFGENH || ibclt == IB_7322_LT_STATE_CFGIDLE || ibclt == IB_7322_LT_STATE_LINKUP)) force_h1(ppd); if ((IS_QMH(ppd->dd) || IS_QME(ppd->dd)) && ppd->link_speed_enabled == QIB_IB_QDR && (ibclt == IB_7322_LT_STATE_CFGTEST || ibclt == IB_7322_LT_STATE_CFGENH || (ibclt >= IB_7322_LT_STATE_POLLACTIVE && ibclt <= IB_7322_LT_STATE_SLEEPQUIET))) adj_tx_serdes(ppd); if (ibclt != IB_7322_LT_STATE_LINKUP) { u8 ltstate = qib_7322_phys_portstate(ibcst); u8 pibclt = (u8)SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkTrainingState); if (!ppd->dd->cspec->r1 && pibclt == IB_7322_LT_STATE_LINKUP && ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) /* If the link went down (but no into recovery, * turn LOS back on */ serdes_7322_los_enable(ppd, 1); if (!ppd->cpspec->qdr_dfe_on && ibclt <= IB_7322_LT_STATE_SLEEPQUIET) { ppd->cpspec->qdr_dfe_on = 1; ppd->cpspec->qdr_dfe_time = 0; /* On link down, reenable QDR adaptation */ qib_write_kreg_port(ppd, krp_static_adapt_dis(2), ppd->dd->cspec->r1 ? QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); pr_info( "IB%u:%u re-enabled QDR adaptation ibclt %x\n", ppd->dd->unit, ppd->port, ibclt); } } } static int qib_7322_set_ib_cfg(struct qib_pportdata *, int, u32); /* * This is per-pport error handling. * will likely get it's own MSIx interrupt (one for each port, * although just a single handler). */ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd) { char *msg; u64 ignore_this_time = 0, iserr = 0, errs, fmask; struct qib_devdata *dd = ppd->dd; /* do this as soon as possible */ fmask = qib_read_kreg64(dd, kr_act_fmask); if (!fmask) check_7322_rxe_status(ppd); errs = qib_read_kreg_port(ppd, krp_errstatus); if (!errs) qib_devinfo(dd->pcidev, "Port%d error interrupt, but no error bits set!\n", ppd->port); if (!fmask) errs &= ~QIB_E_P_IBSTATUSCHANGED; if (!errs) goto done; msg = ppd->cpspec->epmsgbuf; *msg = '\0'; if (errs & ~QIB_E_P_BITSEXTANT) { err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs & ~QIB_E_P_BITSEXTANT, qib_7322p_error_msgs); if (!*msg) snprintf(msg, sizeof(ppd->cpspec->epmsgbuf), "no others"); qib_dev_porterr(dd, ppd->port, "error interrupt with unknown errors 0x%016Lx set (and %s)\n", (errs & ~QIB_E_P_BITSEXTANT), msg); *msg = '\0'; } if (errs & QIB_E_P_SHDR) { u64 symptom; /* determine cause, then write to clear */ symptom = qib_read_kreg_port(ppd, krp_sendhdrsymptom); qib_write_kreg_port(ppd, krp_sendhdrsymptom, 0); err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), symptom, hdrchk_msgs); *msg = '\0'; /* senderrbuf cleared in SPKTERRS below */ } if (errs & QIB_E_P_SPKTERRS) { if ((errs & QIB_E_P_LINK_PKTERRS) && !(ppd->lflags & QIBL_LINKACTIVE)) { /* * This can happen when trying to bring the link * up, but the IB link changes state at the "wrong" * time. The IB logic then complains that the packet * isn't valid. We don't want to confuse people, so * we just don't print them, except at debug */ err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), (errs & QIB_E_P_LINK_PKTERRS), qib_7322p_error_msgs); *msg = '\0'; ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; } qib_disarm_7322_senderrbufs(ppd); } else if ((errs & QIB_E_P_LINK_PKTERRS) && !(ppd->lflags & QIBL_LINKACTIVE)) { /* * This can happen when SMA is trying to bring the link * up, but the IB link changes state at the "wrong" time. * The IB logic then complains that the packet isn't * valid. We don't want to confuse people, so we just * don't print them, except at debug */ err_decode(msg, sizeof(ppd->cpspec->epmsgbuf), errs, qib_7322p_error_msgs); ignore_this_time = errs & QIB_E_P_LINK_PKTERRS; *msg = '\0'; } qib_write_kreg_port(ppd, krp_errclear, errs); errs &= ~ignore_this_time; if (!errs) goto done; if (errs & QIB_E_P_RPKTERRS) qib_stats.sps_rcverrs++; if (errs & QIB_E_P_SPKTERRS) qib_stats.sps_txerrs++; iserr = errs & ~(QIB_E_P_RPKTERRS | QIB_E_P_PKTERRS); if (errs & QIB_E_P_SDMAERRS) sdma_7322_p_errors(ppd, errs); if (errs & QIB_E_P_IBSTATUSCHANGED) { u64 ibcs; u8 ltstate; ibcs = qib_read_kreg_port(ppd, krp_ibcstatus_a); ltstate = qib_7322_phys_portstate(ibcs); if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) handle_serdes_issues(ppd, ibcs); if (!(ppd->cpspec->ibcctrl_a & SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn))) { /* * We got our interrupt, so init code should be * happy and not try alternatives. Now squelch * other "chatter" from link-negotiation (pre Init) */ ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); } /* Update our picture of width and speed from chip */ ppd->link_width_active = (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) ? IB_WIDTH_4X : IB_WIDTH_1X; ppd->link_speed_active = (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) ? QIB_IB_QDR : (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) ? QIB_IB_DDR : QIB_IB_SDR; if ((ppd->lflags & QIBL_IB_LINK_DISABLED) && ltstate != IB_PHYSPORTSTATE_DISABLED) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); else /* * Since going into a recovery state causes the link * state to go down and since recovery is transitory, * it is better if we "miss" ever seeing the link * training state go into recovery (i.e., ignore this * transition for link state special handling purposes) * without updating lastibcstat. */ if (ltstate != IB_PHYSPORTSTATE_LINK_ERR_RECOVER && ltstate != IB_PHYSPORTSTATE_RECOVERY_RETRAIN && ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT && ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE) qib_handle_e_ibstatuschanged(ppd, ibcs); } if (*msg && iserr) qib_dev_porterr(dd, ppd->port, "%s error\n", msg); if (ppd->state_wanted & ppd->lflags) wake_up_interruptible(&ppd->state_wait); done: return; } /* enable/disable chip from delivering interrupts */ static void qib_7322_set_intr_state(struct qib_devdata *dd, u32 enable) { if (enable) { if (dd->flags & QIB_BADINTR) return; qib_write_kreg(dd, kr_intmask, dd->cspec->int_enable_mask); /* cause any pending enabled interrupts to be re-delivered */ qib_write_kreg(dd, kr_intclear, 0ULL); if (dd->cspec->num_msix_entries) { /* and same for MSIx */ u64 val = qib_read_kreg64(dd, kr_intgranted); if (val) qib_write_kreg(dd, kr_intgranted, val); } } else qib_write_kreg(dd, kr_intmask, 0ULL); } /* * Try to cleanup as much as possible for anything that might have gone * wrong while in freeze mode, such as pio buffers being written by user * processes (causing armlaunch), send errors due to going into freeze mode, * etc., and try to avoid causing extra interrupts while doing so. * Forcibly update the in-memory pioavail register copies after cleanup * because the chip won't do it while in freeze mode (the register values * themselves are kept correct). * Make sure that we don't lose any important interrupts by using the chip * feature that says that writing 0 to a bit in *clear that is set in * *status will cause an interrupt to be generated again (if allowed by * the *mask value). * This is in chip-specific code because of all of the register accesses, * even though the details are similar on most chips. */ static void qib_7322_clear_freeze(struct qib_devdata *dd) { int pidx; /* disable error interrupts, to avoid confusion */ qib_write_kreg(dd, kr_errmask, 0ULL); for (pidx = 0; pidx < dd->num_pports; ++pidx) if (dd->pport[pidx].link_speed_supported) qib_write_kreg_port(dd->pport + pidx, krp_errmask, 0ULL); /* also disable interrupts; errormask is sometimes overwritten */ qib_7322_set_intr_state(dd, 0); /* clear the freeze, and be sure chip saw it */ qib_write_kreg(dd, kr_control, dd->control); qib_read_kreg32(dd, kr_scratch); /* * Force new interrupt if any hwerr, error or interrupt bits are * still set, and clear "safe" send packet errors related to freeze * and cancelling sends. Re-enable error interrupts before possible * force of re-interrupt on pending interrupts. */ qib_write_kreg(dd, kr_hwerrclear, 0ULL); qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); /* We need to purge per-port errs and reset mask, too */ for (pidx = 0; pidx < dd->num_pports; ++pidx) { if (!dd->pport[pidx].link_speed_supported) continue; qib_write_kreg_port(dd->pport + pidx, krp_errclear, ~0Ull); qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0Ull); } qib_7322_set_intr_state(dd, 1); } /* no error handling to speak of */ /** * qib_7322_handle_hwerrors - display hardware errors. * @dd: the qlogic_ib device * @msg: the output buffer * @msgl: the size of the output buffer * * Use same msg buffer as regular errors to avoid excessive stack * use. Most hardware errors are catastrophic, but for right now, * we'll print them and continue. We reuse the same message buffer as * qib_handle_errors() to avoid excessive stack usage. */ static void qib_7322_handle_hwerrors(struct qib_devdata *dd, char *msg, size_t msgl) { u64 hwerrs; u32 ctrl; int isfatal = 0; hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); if (!hwerrs) goto bail; if (hwerrs == ~0ULL) { qib_dev_err(dd, "Read of hardware error status failed (all bits set); ignoring\n"); goto bail; } qib_stats.sps_hwerrs++; /* Always clear the error status register, except BIST fail */ qib_write_kreg(dd, kr_hwerrclear, hwerrs & ~HWE_MASK(PowerOnBISTFailed)); hwerrs &= dd->cspec->hwerrmask; /* no EEPROM logging, yet */ if (hwerrs) qib_devinfo(dd->pcidev, "Hardware error: hwerr=0x%llx (cleared)\n", (unsigned long long) hwerrs); ctrl = qib_read_kreg32(dd, kr_control); if ((ctrl & SYM_MASK(Control, FreezeMode)) && !dd->diag_client) { /* * No recovery yet... */ if ((hwerrs & ~HWE_MASK(LATriggered)) || dd->cspec->stay_in_freeze) { /* * If any set that we aren't ignoring only make the * complaint once, in case it's stuck or recurring, * and we get here multiple times * Force link down, so switch knows, and * LEDs are turned off. */ if (dd->flags & QIB_INITTED) isfatal = 1; } else qib_7322_clear_freeze(dd); } if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { isfatal = 1; strlcpy(msg, "[Memory BIST test failed, InfiniPath hardware unusable]", msgl); /* ignore from now on, so disable until driver reloaded */ dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); } err_decode(msg, msgl, hwerrs, qib_7322_hwerror_msgs); /* Ignore esoteric PLL failures et al. */ qib_dev_err(dd, "%s hardware error\n", msg); if (hwerrs & (SYM_MASK(HwErrMask, SDmaMemReadErrMask_0) | SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) { int pidx = 0; int err; unsigned long flags; struct qib_pportdata *ppd = dd->pport; for (; pidx < dd->num_pports; ++pidx, ppd++) { err = 0; if (pidx == 0 && (hwerrs & SYM_MASK(HwErrMask, SDmaMemReadErrMask_0))) err++; if (pidx == 1 && (hwerrs & SYM_MASK(HwErrMask, SDmaMemReadErrMask_1))) err++; if (err) { spin_lock_irqsave(&ppd->sdma_lock, flags); dump_sdma_7322_state(ppd); spin_unlock_irqrestore(&ppd->sdma_lock, flags); } } } if (isfatal && !dd->diag_client) { qib_dev_err(dd, "Fatal Hardware Error, no longer usable, SN %.16s\n", dd->serial); /* * for /sys status file and user programs to print; if no * trailing brace is copied, we'll know it was truncated. */ if (dd->freezemsg) snprintf(dd->freezemsg, dd->freezelen, "{%s}", msg); qib_disable_after_error(dd); } bail:; } /** * qib_7322_init_hwerrors - enable hardware errors * @dd: the qlogic_ib device * * now that we have finished initializing everything that might reasonably * cause a hardware error, and cleared those errors bits as they occur, * we can enable hardware errors in the mask (potentially enabling * freeze mode), and enable hardware errors as errors (along with * everything else) in errormask */ static void qib_7322_init_hwerrors(struct qib_devdata *dd) { int pidx; u64 extsval; extsval = qib_read_kreg64(dd, kr_extstatus); if (!(extsval & (QIB_EXTS_MEMBIST_DISABLED | QIB_EXTS_MEMBIST_ENDTEST))) qib_dev_err(dd, "MemBIST did not complete!\n"); /* never clear BIST failure, so reported on each driver load */ qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); /* clear all */ qib_write_kreg(dd, kr_errclear, ~0ULL); /* enable errors that are masked, at least this first time. */ qib_write_kreg(dd, kr_errmask, ~0ULL); dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); for (pidx = 0; pidx < dd->num_pports; ++pidx) if (dd->pport[pidx].link_speed_supported) qib_write_kreg_port(dd->pport + pidx, krp_errmask, ~0ULL); } /* * Disable and enable the armlaunch error. Used for PIO bandwidth testing * on chips that are count-based, rather than trigger-based. There is no * reference counting, but that's also fine, given the intended use. * Only chip-specific because it's all register accesses */ static void qib_set_7322_armlaunch(struct qib_devdata *dd, u32 enable) { if (enable) { qib_write_kreg(dd, kr_errclear, QIB_E_SPIOARMLAUNCH); dd->cspec->errormask |= QIB_E_SPIOARMLAUNCH; } else dd->cspec->errormask &= ~QIB_E_SPIOARMLAUNCH; qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); } /* * Formerly took parameter in pre-shifted, * pre-merged form with LinkCmd and LinkInitCmd * together, and assuming the zero was NOP. */ static void qib_set_ib_7322_lstate(struct qib_pportdata *ppd, u16 linkcmd, u16 linitcmd) { u64 mod_wd; struct qib_devdata *dd = ppd->dd; unsigned long flags; if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { /* * If we are told to disable, note that so link-recovery * code does not attempt to bring us back up. * Also reset everything that we can, so we start * completely clean when re-enabled (before we * actually issue the disable to the IBC) */ qib_7322_mini_pcs_reset(ppd); spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags |= QIBL_IB_LINK_DISABLED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { /* * Any other linkinitcmd will lead to LINKDOWN and then * to INIT (if all is well), so clear flag to let * link-recovery code attempt to bring us back up. */ spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_LINK_DISABLED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); /* * Clear status change interrupt reduction so the * new state is seen. */ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); } mod_wd = (linkcmd << IBA7322_IBCC_LINKCMD_SHIFT) | (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a | mod_wd); /* write to chip to prevent back-to-back writes of ibc reg */ qib_write_kreg(dd, kr_scratch, 0); } /* * The total RCV buffer memory is 64KB, used for both ports, and is * in units of 64 bytes (same as IB flow control credit unit). * The consumedVL unit in the same registers are in 32 byte units! * So, a VL15 packet needs 4.50 IB credits, and 9 rx buffer chunks, * and we can therefore allocate just 9 IB credits for 2 VL15 packets * in krp_rxcreditvl15, rather than 10. */ #define RCV_BUF_UNITSZ 64 #define NUM_RCV_BUF_UNITS(dd) ((64 * 1024) / (RCV_BUF_UNITSZ * dd->num_pports)) static void set_vls(struct qib_pportdata *ppd) { int i, numvls, totcred, cred_vl, vl0extra; struct qib_devdata *dd = ppd->dd; u64 val; numvls = qib_num_vls(ppd->vls_operational); /* * Set up per-VL credits. Below is kluge based on these assumptions: * 1) port is disabled at the time early_init is called. * 2) give VL15 17 credits, for two max-plausible packets. * 3) Give VL0-N the rest, with any rounding excess used for VL0 */ /* 2 VL15 packets @ 288 bytes each (including IB headers) */ totcred = NUM_RCV_BUF_UNITS(dd); cred_vl = (2 * 288 + RCV_BUF_UNITSZ - 1) / RCV_BUF_UNITSZ; totcred -= cred_vl; qib_write_kreg_port(ppd, krp_rxcreditvl15, (u64) cred_vl); cred_vl = totcred / numvls; vl0extra = totcred - cred_vl * numvls; qib_write_kreg_port(ppd, krp_rxcreditvl0, cred_vl + vl0extra); for (i = 1; i < numvls; i++) qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, cred_vl); for (; i < 8; i++) /* no buffer space for other VLs */ qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); /* Notify IBC that credits need to be recalculated */ val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); val |= SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); qib_write_kreg(dd, kr_scratch, 0ULL); val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, CREDIT_CHANGE); qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); for (i = 0; i < numvls; i++) val = qib_read_kreg_port(ppd, krp_rxcreditvl0 + i); val = qib_read_kreg_port(ppd, krp_rxcreditvl15); /* Change the number of operational VLs */ ppd->cpspec->ibcctrl_a = (ppd->cpspec->ibcctrl_a & ~SYM_MASK(IBCCtrlA_0, NumVLane)) | ((u64)(numvls - 1) << SYM_LSB(IBCCtrlA_0, NumVLane)); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); } /* * The code that deals with actual SerDes is in serdes_7322_init(). * Compared to the code for iba7220, it is minimal. */ static int serdes_7322_init(struct qib_pportdata *ppd); /** * qib_7322_bringup_serdes - bring up the serdes * @ppd: physical port on the qlogic_ib device */ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; u64 val, guid, ibc; unsigned long flags; int ret = 0; /* * SerDes model not in Pd, but still need to * set up much of IBCCtrl and IBCDDRCtrl; move elsewhere * eventually. */ /* Put IBC in reset, sends disabled (should be in reset already) */ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); /* ensure previous Tx parameters are not still forced */ qib_write_kreg_port(ppd, krp_tx_deemph_override, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, reset_tx_deemphasis_override)); if (qib_compat_ddr_negotiate) { ppd->cpspec->ibdeltainprog = 1; ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, crp_ibsymbolerr); ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, crp_iblinkerrrecov); } /* flowcontrolwatermark is in units of KBytes */ ibc = 0x5ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlWaterMark); /* * Flow control is sent this often, even if no changes in * buffer space occur. Units are 128ns for this chip. * Set to 3usec. */ ibc |= 24ULL << SYM_LSB(IBCCtrlA_0, FlowCtrlPeriod); /* max error tolerance */ ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); /* IB credit flow control. */ ibc |= 0xfULL << SYM_LSB(IBCCtrlA_0, OverrunThreshold); /* * set initial max size pkt IBC will send, including ICRC; it's the * PIO buffer size in dwords, less 1; also see qib_set_mtu() */ ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrlA_0, MaxPktLen); ppd->cpspec->ibcctrl_a = ibc; /* without linkcmd or linkinitcmd! */ /* * Reset the PCS interface to the serdes (and also ibc, which is still * in reset from above). Writes new value of ibcctrl_a as last step. */ qib_7322_mini_pcs_reset(ppd); if (!ppd->cpspec->ibcctrl_b) { unsigned lse = ppd->link_speed_enabled; /* * Not on re-init after reset, establish shadow * and force initial config. */ ppd->cpspec->ibcctrl_b = qib_read_kreg_port(ppd, krp_ibcctrl_b); ppd->cpspec->ibcctrl_b &= ~(IBA7322_IBC_SPEED_QDR | IBA7322_IBC_SPEED_DDR | IBA7322_IBC_SPEED_SDR | IBA7322_IBC_WIDTH_AUTONEG | SYM_MASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED)); if (lse & (lse - 1)) /* Muliple speeds enabled */ ppd->cpspec->ibcctrl_b |= (lse << IBA7322_IBC_SPEED_LSB) | IBA7322_IBC_IBTA_1_2_MASK | IBA7322_IBC_MAX_SPEED_MASK; else ppd->cpspec->ibcctrl_b |= (lse == QIB_IB_QDR) ? IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : (lse == QIB_IB_DDR) ? IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR; if ((ppd->link_width_enabled & (IB_WIDTH_1X | IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X)) ppd->cpspec->ibcctrl_b |= IBA7322_IBC_WIDTH_AUTONEG; else ppd->cpspec->ibcctrl_b |= ppd->link_width_enabled == IB_WIDTH_4X ? IBA7322_IBC_WIDTH_4X_ONLY : IBA7322_IBC_WIDTH_1X_ONLY; /* always enable these on driver reload, not sticky */ ppd->cpspec->ibcctrl_b |= (IBA7322_IBC_RXPOL_MASK | IBA7322_IBC_HRTBT_MASK); } qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); /* setup so we have more time at CFGTEST to change H1 */ val = qib_read_kreg_port(ppd, krp_ibcctrl_c); val &= ~SYM_MASK(IBCCtrlC_0, IB_FRONT_PORCH); val |= 0xfULL << SYM_LSB(IBCCtrlC_0, IB_FRONT_PORCH); qib_write_kreg_port(ppd, krp_ibcctrl_c, val); serdes_7322_init(ppd); guid = be64_to_cpu(ppd->guid); if (!guid) { if (dd->base_guid) guid = be64_to_cpu(dd->base_guid) + ppd->port - 1; ppd->guid = cpu_to_be64(guid); } qib_write_kreg_port(ppd, krp_hrtbt_guid, guid); /* write to chip to prevent back-to-back writes of ibc reg */ qib_write_kreg(dd, kr_scratch, 0); /* Enable port */ ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); set_vls(ppd); /* initially come up DISABLED, without sending anything. */ val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); qib_write_kreg_port(ppd, krp_ibcctrl_a, val); qib_write_kreg(dd, kr_scratch, 0ULL); /* clear the linkinit cmds */ ppd->cpspec->ibcctrl_a = val & ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); /* be paranoid against later code motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); /* Also enable IBSTATUSCHG interrupt. */ val = qib_read_kreg_port(ppd, krp_errmask); qib_write_kreg_port(ppd, krp_errmask, val | ERR_MASK_N(IBStatusChanged)); /* Always zero until we start messing with SerDes for real */ return ret; } /** * qib_7322_quiet_serdes - set serdes to txidle * @dd: the qlogic_ib device * Called when driver is being unloaded */ static void qib_7322_mini_quiet_serdes(struct qib_pportdata *ppd) { u64 val; unsigned long flags; qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; spin_unlock_irqrestore(&ppd->lflags_lock, flags); wake_up(&ppd->cpspec->autoneg_wait); cancel_delayed_work_sync(&ppd->cpspec->autoneg_work); if (ppd->dd->cspec->r1) cancel_delayed_work_sync(&ppd->cpspec->ipg_work); ppd->cpspec->chase_end = 0; if (ppd->cpspec->chase_timer.function) /* if initted */ del_timer_sync(&ppd->cpspec->chase_timer); /* * Despite the name, actually disables IBC as well. Do it when * we are as sure as possible that no more packets can be * received, following the down and the PCS reset. * The actual disabling happens in qib_7322_mini_pci_reset(), * along with the PCS being reset. */ ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBLinkEn); qib_7322_mini_pcs_reset(ppd); /* * Update the adjusted counters so the adjustment persists * across driver reload. */ if (ppd->cpspec->ibsymdelta || ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog || ppd->cpspec->iblnkdowndelta) { struct qib_devdata *dd = ppd->dd; u64 diagc; /* enable counter writes */ diagc = qib_read_kreg64(dd, kr_hwdiagctrl); qib_write_kreg(dd, kr_hwdiagctrl, diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); if (ppd->cpspec->ibsymdelta || ppd->cpspec->ibdeltainprog) { val = read_7322_creg32_port(ppd, crp_ibsymbolerr); if (ppd->cpspec->ibdeltainprog) val -= val - ppd->cpspec->ibsymsnap; val -= ppd->cpspec->ibsymdelta; write_7322_creg_port(ppd, crp_ibsymbolerr, val); } if (ppd->cpspec->iblnkerrdelta || ppd->cpspec->ibdeltainprog) { val = read_7322_creg32_port(ppd, crp_iblinkerrrecov); if (ppd->cpspec->ibdeltainprog) val -= val - ppd->cpspec->iblnkerrsnap; val -= ppd->cpspec->iblnkerrdelta; write_7322_creg_port(ppd, crp_iblinkerrrecov, val); } if (ppd->cpspec->iblnkdowndelta) { val = read_7322_creg32_port(ppd, crp_iblinkdown); val += ppd->cpspec->iblnkdowndelta; write_7322_creg_port(ppd, crp_iblinkdown, val); } /* * No need to save ibmalfdelta since IB perfcounters * are cleared on driver reload. */ /* and disable counter writes */ qib_write_kreg(dd, kr_hwdiagctrl, diagc); } } /** * qib_setup_7322_setextled - set the state of the two external LEDs * @ppd: physical port on the qlogic_ib device * @on: whether the link is up or not * * The exact combo of LEDs if on is true is determined by looking * at the ibcstatus. * * These LEDs indicate the physical and logical state of IB link. * For this chip (at least with recommended board pinouts), LED1 * is Yellow (logical state) and LED2 is Green (physical state), * * Note: We try to match the Mellanox HCA LED behavior as best * we can. Green indicates physical link state is OK (something is * plugged in, and we can train). * Amber indicates the link is logically up (ACTIVE). * Mellanox further blinks the amber LED to indicate data packet * activity, but we have no hardware support for that, so it would * require waking up every 10-20 msecs and checking the counters * on the chip, and then turning the LED off if appropriate. That's * visible overhead, so not something we will do. */ static void qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) { struct qib_devdata *dd = ppd->dd; u64 extctl, ledblink = 0, val; unsigned long flags; int yel, grn; /* * The diags use the LED to indicate diag info, so we leave * the external LED alone when the diags are running. */ if (dd->diag_client) return; /* Allow override of LED display for, e.g. Locating system in rack */ if (ppd->led_override) { grn = (ppd->led_override & QIB_LED_PHYS); yel = (ppd->led_override & QIB_LED_LOG); } else if (on) { val = qib_read_kreg_port(ppd, krp_ibcstatus_a); grn = qib_7322_phys_portstate(val) == IB_PHYSPORTSTATE_LINKUP; yel = qib_7322_iblink_state(val) == IB_PORT_ACTIVE; } else { grn = 0; yel = 0; } spin_lock_irqsave(&dd->cspec->gpio_lock, flags); extctl = dd->cspec->extctrl & (ppd->port == 1 ? ~ExtLED_IB1_MASK : ~ExtLED_IB2_MASK); if (grn) { extctl |= ppd->port == 1 ? ExtLED_IB1_GRN : ExtLED_IB2_GRN; /* * Counts are in chip clock (4ns) periods. * This is 1/16 sec (66.6ms) on, * 3/16 sec (187.5 ms) off, with packets rcvd. */ ledblink = ((66600 * 1000UL / 4) << IBA7322_LEDBLINK_ON_SHIFT) | ((187500 * 1000UL / 4) << IBA7322_LEDBLINK_OFF_SHIFT); } if (yel) extctl |= ppd->port == 1 ? ExtLED_IB1_YEL : ExtLED_IB2_YEL; dd->cspec->extctrl = extctl; qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); if (ledblink) /* blink the LED on packet receive */ qib_write_kreg_port(ppd, krp_rcvpktledcnt, ledblink); } #ifdef CONFIG_INFINIBAND_QIB_DCA static int qib_7322_notify_dca(struct qib_devdata *dd, unsigned long event) { switch (event) { case DCA_PROVIDER_ADD: if (dd->flags & QIB_DCA_ENABLED) break; if (!dca_add_requester(&dd->pcidev->dev)) { qib_devinfo(dd->pcidev, "DCA enabled\n"); dd->flags |= QIB_DCA_ENABLED; qib_setup_dca(dd); } break; case DCA_PROVIDER_REMOVE: if (dd->flags & QIB_DCA_ENABLED) { dca_remove_requester(&dd->pcidev->dev); dd->flags &= ~QIB_DCA_ENABLED; dd->cspec->dca_ctrl = 0; qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl); } break; } return 0; } static void qib_update_rhdrq_dca(struct qib_ctxtdata *rcd, int cpu) { struct qib_devdata *dd = rcd->dd; struct qib_chip_specific *cspec = dd->cspec; if (!(dd->flags & QIB_DCA_ENABLED)) return; if (cspec->rhdr_cpu[rcd->ctxt] != cpu) { const struct dca_reg_map *rmp; cspec->rhdr_cpu[rcd->ctxt] = cpu; rmp = &dca_rcvhdr_reg_map[rcd->ctxt]; cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] &= rmp->mask; cspec->dca_rcvhdr_ctrl[rmp->shadow_inx] |= (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << rmp->lsb; qib_devinfo(dd->pcidev, "Ctxt %d cpu %d dca %llx\n", rcd->ctxt, cpu, (long long) cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); qib_write_kreg(dd, rmp->regno, cspec->dca_rcvhdr_ctrl[rmp->shadow_inx]); cspec->dca_ctrl |= SYM_MASK(DCACtrlA, RcvHdrqDCAEnable); qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); } } static void qib_update_sdma_dca(struct qib_pportdata *ppd, int cpu) { struct qib_devdata *dd = ppd->dd; struct qib_chip_specific *cspec = dd->cspec; unsigned pidx = ppd->port - 1; if (!(dd->flags & QIB_DCA_ENABLED)) return; if (cspec->sdma_cpu[pidx] != cpu) { cspec->sdma_cpu[pidx] = cpu; cspec->dca_rcvhdr_ctrl[4] &= ~(ppd->hw_pidx ? SYM_MASK(DCACtrlF, SendDma1DCAOPH) : SYM_MASK(DCACtrlF, SendDma0DCAOPH)); cspec->dca_rcvhdr_ctrl[4] |= (u64) dca3_get_tag(&dd->pcidev->dev, cpu) << (ppd->hw_pidx ? SYM_LSB(DCACtrlF, SendDma1DCAOPH) : SYM_LSB(DCACtrlF, SendDma0DCAOPH)); qib_devinfo(dd->pcidev, "sdma %d cpu %d dca %llx\n", ppd->hw_pidx, cpu, (long long) cspec->dca_rcvhdr_ctrl[4]); qib_write_kreg(dd, KREG_IDX(DCACtrlF), cspec->dca_rcvhdr_ctrl[4]); cspec->dca_ctrl |= ppd->hw_pidx ? SYM_MASK(DCACtrlA, SendDMAHead1DCAEnable) : SYM_MASK(DCACtrlA, SendDMAHead0DCAEnable); qib_write_kreg(dd, KREG_IDX(DCACtrlA), cspec->dca_ctrl); } } static void qib_setup_dca(struct qib_devdata *dd) { struct qib_chip_specific *cspec = dd->cspec; int i; for (i = 0; i < ARRAY_SIZE(cspec->rhdr_cpu); i++) cspec->rhdr_cpu[i] = -1; for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) cspec->sdma_cpu[i] = -1; cspec->dca_rcvhdr_ctrl[0] = (1ULL << SYM_LSB(DCACtrlB, RcvHdrq0DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlB, RcvHdrq1DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlB, RcvHdrq2DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlB, RcvHdrq3DCAXfrCnt)); cspec->dca_rcvhdr_ctrl[1] = (1ULL << SYM_LSB(DCACtrlC, RcvHdrq4DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlC, RcvHdrq5DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlC, RcvHdrq6DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlC, RcvHdrq7DCAXfrCnt)); cspec->dca_rcvhdr_ctrl[2] = (1ULL << SYM_LSB(DCACtrlD, RcvHdrq8DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlD, RcvHdrq9DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlD, RcvHdrq10DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlD, RcvHdrq11DCAXfrCnt)); cspec->dca_rcvhdr_ctrl[3] = (1ULL << SYM_LSB(DCACtrlE, RcvHdrq12DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlE, RcvHdrq13DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlE, RcvHdrq14DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlE, RcvHdrq15DCAXfrCnt)); cspec->dca_rcvhdr_ctrl[4] = (1ULL << SYM_LSB(DCACtrlF, RcvHdrq16DCAXfrCnt)) | (1ULL << SYM_LSB(DCACtrlF, RcvHdrq17DCAXfrCnt)); for (i = 0; i < ARRAY_SIZE(cspec->sdma_cpu); i++) qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i, cspec->dca_rcvhdr_ctrl[i]); for (i = 0; i < cspec->num_msix_entries; i++) setup_dca_notifier(dd, &cspec->msix_entries[i]); } static void qib_irq_notifier_notify(struct irq_affinity_notify *notify, const cpumask_t *mask) { struct qib_irq_notify *n = container_of(notify, struct qib_irq_notify, notify); int cpu = cpumask_first(mask); if (n->rcv) { struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; qib_update_rhdrq_dca(rcd, cpu); } else { struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; qib_update_sdma_dca(ppd, cpu); } } static void qib_irq_notifier_release(struct kref *ref) { struct qib_irq_notify *n = container_of(ref, struct qib_irq_notify, notify.kref); struct qib_devdata *dd; if (n->rcv) { struct qib_ctxtdata *rcd = (struct qib_ctxtdata *)n->arg; dd = rcd->dd; } else { struct qib_pportdata *ppd = (struct qib_pportdata *)n->arg; dd = ppd->dd; } qib_devinfo(dd->pcidev, "release on HCA notify 0x%p n 0x%p\n", ref, n); kfree(n); } #endif /* * Disable MSIx interrupt if enabled, call generic MSIx code * to cleanup, and clear pending MSIx interrupts. * Used for fallback to INTx, after reset, and when MSIx setup fails. */ static void qib_7322_nomsix(struct qib_devdata *dd) { u64 intgranted; int n; dd->cspec->main_int_mask = ~0ULL; n = dd->cspec->num_msix_entries; if (n) { int i; dd->cspec->num_msix_entries = 0; for (i = 0; i < n; i++) { #ifdef CONFIG_INFINIBAND_QIB_DCA reset_dca_notifier(dd, &dd->cspec->msix_entries[i]); #endif irq_set_affinity_hint( dd->cspec->msix_entries[i].irq, NULL); free_cpumask_var(dd->cspec->msix_entries[i].mask); free_irq(dd->cspec->msix_entries[i].irq, dd->cspec->msix_entries[i].arg); } qib_nomsix(dd); } /* make sure no MSIx interrupts are left pending */ intgranted = qib_read_kreg64(dd, kr_intgranted); if (intgranted) qib_write_kreg(dd, kr_intgranted, intgranted); } static void qib_7322_free_irq(struct qib_devdata *dd) { if (dd->cspec->irq) { free_irq(dd->cspec->irq, dd); dd->cspec->irq = 0; } qib_7322_nomsix(dd); } static void qib_setup_7322_cleanup(struct qib_devdata *dd) { int i; #ifdef CONFIG_INFINIBAND_QIB_DCA if (dd->flags & QIB_DCA_ENABLED) { dca_remove_requester(&dd->pcidev->dev); dd->flags &= ~QIB_DCA_ENABLED; dd->cspec->dca_ctrl = 0; qib_write_kreg(dd, KREG_IDX(DCACtrlA), dd->cspec->dca_ctrl); } #endif qib_7322_free_irq(dd); kfree(dd->cspec->cntrs); kfree(dd->cspec->sendchkenable); kfree(dd->cspec->sendgrhchk); kfree(dd->cspec->sendibchk); kfree(dd->cspec->msix_entries); for (i = 0; i < dd->num_pports; i++) { unsigned long flags; u32 mask = QSFP_GPIO_MOD_PRS_N | (QSFP_GPIO_MOD_PRS_N << QSFP_GPIO_PORT2_SHIFT); kfree(dd->pport[i].cpspec->portcntrs); if (dd->flags & QIB_HAS_QSFP) { spin_lock_irqsave(&dd->cspec->gpio_lock, flags); dd->cspec->gpio_mask &= ~mask; qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); } } } /* handle SDMA interrupts */ static void sdma_7322_intr(struct qib_devdata *dd, u64 istat) { struct qib_pportdata *ppd0 = &dd->pport[0]; struct qib_pportdata *ppd1 = &dd->pport[1]; u64 intr0 = istat & (INT_MASK_P(SDma, 0) | INT_MASK_P(SDmaIdle, 0) | INT_MASK_P(SDmaProgress, 0)); u64 intr1 = istat & (INT_MASK_P(SDma, 1) | INT_MASK_P(SDmaIdle, 1) | INT_MASK_P(SDmaProgress, 1)); if (intr0) qib_sdma_intr(ppd0); if (intr1) qib_sdma_intr(ppd1); if (istat & INT_MASK_PM(SDmaCleanupDone, 0)) qib_sdma_process_event(ppd0, qib_sdma_event_e20_hw_started); if (istat & INT_MASK_PM(SDmaCleanupDone, 1)) qib_sdma_process_event(ppd1, qib_sdma_event_e20_hw_started); } /* * Set or clear the Send buffer available interrupt enable bit. */ static void qib_wantpiobuf_7322_intr(struct qib_devdata *dd, u32 needint) { unsigned long flags; spin_lock_irqsave(&dd->sendctrl_lock, flags); if (needint) dd->sendctrl |= SYM_MASK(SendCtrl, SendIntBufAvail); else dd->sendctrl &= ~SYM_MASK(SendCtrl, SendIntBufAvail); qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); qib_write_kreg(dd, kr_scratch, 0ULL); spin_unlock_irqrestore(&dd->sendctrl_lock, flags); } /* * Somehow got an interrupt with reserved bits set in interrupt status. * Print a message so we know it happened, then clear them. * keep mainline interrupt handler cache-friendly */ static noinline void unknown_7322_ibits(struct qib_devdata *dd, u64 istat) { u64 kills; char msg[128]; kills = istat & ~QIB_I_BITSEXTANT; qib_dev_err(dd, "Clearing reserved interrupt(s) 0x%016llx: %s\n", (unsigned long long) kills, msg); qib_write_kreg(dd, kr_intmask, (dd->cspec->int_enable_mask & ~kills)); } /* keep mainline interrupt handler cache-friendly */ static noinline void unknown_7322_gpio_intr(struct qib_devdata *dd) { u32 gpiostatus; int handled = 0; int pidx; /* * Boards for this chip currently don't use GPIO interrupts, * so clear by writing GPIOstatus to GPIOclear, and complain * to developer. To avoid endless repeats, clear * the bits in the mask, since there is some kind of * programming error or chip problem. */ gpiostatus = qib_read_kreg32(dd, kr_gpio_status); /* * In theory, writing GPIOstatus to GPIOclear could * have a bad side-effect on some diagnostic that wanted * to poll for a status-change, but the various shadows * make that problematic at best. Diags will just suppress * all GPIO interrupts during such tests. */ qib_write_kreg(dd, kr_gpio_clear, gpiostatus); /* * Check for QSFP MOD_PRS changes * only works for single port if IB1 != pidx1 */ for (pidx = 0; pidx < dd->num_pports && (dd->flags & QIB_HAS_QSFP); ++pidx) { struct qib_pportdata *ppd; struct qib_qsfp_data *qd; u32 mask; if (!dd->pport[pidx].link_speed_supported) continue; mask = QSFP_GPIO_MOD_PRS_N; ppd = dd->pport + pidx; mask <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); if (gpiostatus & dd->cspec->gpio_mask & mask) { u64 pins; qd = &ppd->cpspec->qsfp_data; gpiostatus &= ~mask; pins = qib_read_kreg64(dd, kr_extstatus); pins >>= SYM_LSB(EXTStatus, GPIOIn); if (!(pins & mask)) { ++handled; qd->t_insert = jiffies; queue_work(ib_wq, &qd->work); } } } if (gpiostatus && !handled) { const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); u32 gpio_irq = mask & gpiostatus; /* * Clear any troublemakers, and update chip from shadow */ dd->cspec->gpio_mask &= ~gpio_irq; qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); } } /* * Handle errors and unusual events first, separate function * to improve cache hits for fast path interrupt handling. */ static noinline void unlikely_7322_intr(struct qib_devdata *dd, u64 istat) { if (istat & ~QIB_I_BITSEXTANT) unknown_7322_ibits(dd, istat); if (istat & QIB_I_GPIO) unknown_7322_gpio_intr(dd); if (istat & QIB_I_C_ERROR) { qib_write_kreg(dd, kr_errmask, 0ULL); tasklet_schedule(&dd->error_tasklet); } if (istat & INT_MASK_P(Err, 0) && dd->rcd[0]) handle_7322_p_errors(dd->rcd[0]->ppd); if (istat & INT_MASK_P(Err, 1) && dd->rcd[1]) handle_7322_p_errors(dd->rcd[1]->ppd); } /* * Dynamically adjust the rcv int timeout for a context based on incoming * packet rate. */ static void adjust_rcv_timeout(struct qib_ctxtdata *rcd, int npkts) { struct qib_devdata *dd = rcd->dd; u32 timeout = dd->cspec->rcvavail_timeout[rcd->ctxt]; /* * Dynamically adjust idle timeout on chip * based on number of packets processed. */ if (npkts < rcv_int_count && timeout > 2) timeout >>= 1; else if (npkts >= rcv_int_count && timeout < rcv_int_timeout) timeout = min(timeout << 1, rcv_int_timeout); else return; dd->cspec->rcvavail_timeout[rcd->ctxt] = timeout; qib_write_kreg(dd, kr_rcvavailtimeout + rcd->ctxt, timeout); } /* * This is the main interrupt handler. * It will normally only be used for low frequency interrupts but may * have to handle all interrupts if INTx is enabled or fewer than normal * MSIx interrupts were allocated. * This routine should ignore the interrupt bits for any of the * dedicated MSIx handlers. */ static irqreturn_t qib_7322intr(int irq, void *data) { struct qib_devdata *dd = data; irqreturn_t ret; u64 istat; u64 ctxtrbits; u64 rmask; unsigned i; u32 npkts; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ ret = IRQ_HANDLED; goto bail; } istat = qib_read_kreg64(dd, kr_intstatus); if (unlikely(istat == ~0ULL)) { qib_bad_intrstatus(dd); qib_dev_err(dd, "Interrupt status all f's, skipping\n"); /* don't know if it was our interrupt or not */ ret = IRQ_NONE; goto bail; } istat &= dd->cspec->main_int_mask; if (unlikely(!istat)) { /* already handled, or shared and not us */ ret = IRQ_NONE; goto bail; } this_cpu_inc(*dd->int_counter); /* handle "errors" of various kinds first, device ahead of port */ if (unlikely(istat & (~QIB_I_BITSEXTANT | QIB_I_GPIO | QIB_I_C_ERROR | INT_MASK_P(Err, 0) | INT_MASK_P(Err, 1)))) unlikely_7322_intr(dd, istat); /* * Clear the interrupt bits we found set, relatively early, so we * "know" know the chip will have seen this by the time we process * the queue, and will re-interrupt if necessary. The processor * itself won't take the interrupt again until we return. */ qib_write_kreg(dd, kr_intclear, istat); /* * Handle kernel receive queues before checking for pio buffers * available since receives can overflow; piobuf waiters can afford * a few extra cycles, since they were waiting anyway. */ ctxtrbits = istat & (QIB_I_RCVAVAIL_MASK | QIB_I_RCVURG_MASK); if (ctxtrbits) { rmask = (1ULL << QIB_I_RCVAVAIL_LSB) | (1ULL << QIB_I_RCVURG_LSB); for (i = 0; i < dd->first_user_ctxt; i++) { if (ctxtrbits & rmask) { ctxtrbits &= ~rmask; if (dd->rcd[i]) qib_kreceive(dd->rcd[i], NULL, &npkts); } rmask <<= 1; } if (ctxtrbits) { ctxtrbits = (ctxtrbits >> QIB_I_RCVAVAIL_LSB) | (ctxtrbits >> QIB_I_RCVURG_LSB); qib_handle_urcv(dd, ctxtrbits); } } if (istat & (QIB_I_P_SDMAINT(0) | QIB_I_P_SDMAINT(1))) sdma_7322_intr(dd, istat); if ((istat & QIB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) qib_ib_piobufavail(dd); ret = IRQ_HANDLED; bail: return ret; } /* * Dedicated receive packet available interrupt handler. */ static irqreturn_t qib_7322pintr(int irq, void *data) { struct qib_ctxtdata *rcd = data; struct qib_devdata *dd = rcd->dd; u32 npkts; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ return IRQ_HANDLED; this_cpu_inc(*dd->int_counter); /* Clear the interrupt bit we expect to be set. */ qib_write_kreg(dd, kr_intclear, ((1ULL << QIB_I_RCVAVAIL_LSB) | (1ULL << QIB_I_RCVURG_LSB)) << rcd->ctxt); qib_kreceive(rcd, NULL, &npkts); return IRQ_HANDLED; } /* * Dedicated Send buffer available interrupt handler. */ static irqreturn_t qib_7322bufavail(int irq, void *data) { struct qib_devdata *dd = data; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ return IRQ_HANDLED; this_cpu_inc(*dd->int_counter); /* Clear the interrupt bit we expect to be set. */ qib_write_kreg(dd, kr_intclear, QIB_I_SPIOBUFAVAIL); /* qib_ib_piobufavail() will clear the want PIO interrupt if needed */ if (dd->flags & QIB_INITTED) qib_ib_piobufavail(dd); else qib_wantpiobuf_7322_intr(dd, 0); return IRQ_HANDLED; } /* * Dedicated Send DMA interrupt handler. */ static irqreturn_t sdma_intr(int irq, void *data) { struct qib_pportdata *ppd = data; struct qib_devdata *dd = ppd->dd; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ return IRQ_HANDLED; this_cpu_inc(*dd->int_counter); /* Clear the interrupt bit we expect to be set. */ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? INT_MASK_P(SDma, 1) : INT_MASK_P(SDma, 0)); qib_sdma_intr(ppd); return IRQ_HANDLED; } /* * Dedicated Send DMA idle interrupt handler. */ static irqreturn_t sdma_idle_intr(int irq, void *data) { struct qib_pportdata *ppd = data; struct qib_devdata *dd = ppd->dd; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ return IRQ_HANDLED; this_cpu_inc(*dd->int_counter); /* Clear the interrupt bit we expect to be set. */ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? INT_MASK_P(SDmaIdle, 1) : INT_MASK_P(SDmaIdle, 0)); qib_sdma_intr(ppd); return IRQ_HANDLED; } /* * Dedicated Send DMA progress interrupt handler. */ static irqreturn_t sdma_progress_intr(int irq, void *data) { struct qib_pportdata *ppd = data; struct qib_devdata *dd = ppd->dd; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ return IRQ_HANDLED; this_cpu_inc(*dd->int_counter); /* Clear the interrupt bit we expect to be set. */ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? INT_MASK_P(SDmaProgress, 1) : INT_MASK_P(SDmaProgress, 0)); qib_sdma_intr(ppd); return IRQ_HANDLED; } /* * Dedicated Send DMA cleanup interrupt handler. */ static irqreturn_t sdma_cleanup_intr(int irq, void *data) { struct qib_pportdata *ppd = data; struct qib_devdata *dd = ppd->dd; if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) /* * This return value is not great, but we do not want the * interrupt core code to remove our interrupt handler * because we don't appear to be handling an interrupt * during a chip reset. */ return IRQ_HANDLED; this_cpu_inc(*dd->int_counter); /* Clear the interrupt bit we expect to be set. */ qib_write_kreg(dd, kr_intclear, ppd->hw_pidx ? INT_MASK_PM(SDmaCleanupDone, 1) : INT_MASK_PM(SDmaCleanupDone, 0)); qib_sdma_process_event(ppd, qib_sdma_event_e20_hw_started); return IRQ_HANDLED; } #ifdef CONFIG_INFINIBAND_QIB_DCA static void reset_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m) { if (!m->dca) return; qib_devinfo(dd->pcidev, "Disabling notifier on HCA %d irq %d\n", dd->unit, m->irq); irq_set_affinity_notifier( m->irq, NULL); m->notifier = NULL; } static void setup_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m) { struct qib_irq_notify *n; if (!m->dca) return; n = kzalloc(sizeof(*n), GFP_KERNEL); if (n) { int ret; m->notifier = n; n->notify.irq = m->irq; n->notify.notify = qib_irq_notifier_notify; n->notify.release = qib_irq_notifier_release; n->arg = m->arg; n->rcv = m->rcv; qib_devinfo(dd->pcidev, "set notifier irq %d rcv %d notify %p\n", n->notify.irq, n->rcv, &n->notify); ret = irq_set_affinity_notifier( n->notify.irq, &n->notify); if (ret) { m->notifier = NULL; kfree(n); } } } #endif /* * Set up our chip-specific interrupt handler. * The interrupt type has already been setup, so * we just need to do the registration and error checking. * If we are using MSIx interrupts, we may fall back to * INTx later, if the interrupt handler doesn't get called * within 1/2 second (see verify_interrupt()). */ static void qib_setup_7322_interrupt(struct qib_devdata *dd, int clearpend) { int ret, i, msixnum; u64 redirect[6]; u64 mask; const struct cpumask *local_mask; int firstcpu, secondcpu = 0, currrcvcpu = 0; if (!dd->num_pports) return; if (clearpend) { /* * if not switching interrupt types, be sure interrupts are * disabled, and then clear anything pending at this point, * because we are starting clean. */ qib_7322_set_intr_state(dd, 0); /* clear the reset error, init error/hwerror mask */ qib_7322_init_hwerrors(dd); /* clear any interrupt bits that might be set */ qib_write_kreg(dd, kr_intclear, ~0ULL); /* make sure no pending MSIx intr, and clear diag reg */ qib_write_kreg(dd, kr_intgranted, ~0ULL); qib_write_kreg(dd, kr_vecclr_wo_int, ~0ULL); } if (!dd->cspec->num_msix_entries) { /* Try to get INTx interrupt */ try_intx: if (!dd->pcidev->irq) { qib_dev_err(dd, "irq is 0, BIOS error? Interrupts won't work\n"); goto bail; } ret = request_irq(dd->pcidev->irq, qib_7322intr, IRQF_SHARED, QIB_DRV_NAME, dd); if (ret) { qib_dev_err(dd, "Couldn't setup INTx interrupt (irq=%d): %d\n", dd->pcidev->irq, ret); goto bail; } dd->cspec->irq = dd->pcidev->irq; dd->cspec->main_int_mask = ~0ULL; goto bail; } /* Try to get MSIx interrupts */ memset(redirect, 0, sizeof(redirect)); mask = ~0ULL; msixnum = 0; local_mask = cpumask_of_pcibus(dd->pcidev->bus); firstcpu = cpumask_first(local_mask); if (firstcpu >= nr_cpu_ids || cpumask_weight(local_mask) == num_online_cpus()) { local_mask = topology_core_cpumask(0); firstcpu = cpumask_first(local_mask); } if (firstcpu < nr_cpu_ids) { secondcpu = cpumask_next(firstcpu, local_mask); if (secondcpu >= nr_cpu_ids) secondcpu = firstcpu; currrcvcpu = secondcpu; } for (i = 0; msixnum < dd->cspec->num_msix_entries; i++) { irq_handler_t handler; void *arg; u64 val; int lsb, reg, sh; #ifdef CONFIG_INFINIBAND_QIB_DCA int dca = 0; #endif dd->cspec->msix_entries[msixnum]. name[sizeof(dd->cspec->msix_entries[msixnum].name) - 1] = '\0'; if (i < ARRAY_SIZE(irq_table)) { if (irq_table[i].port) { /* skip if for a non-configured port */ if (irq_table[i].port > dd->num_pports) continue; arg = dd->pport + irq_table[i].port - 1; } else arg = dd; #ifdef CONFIG_INFINIBAND_QIB_DCA dca = irq_table[i].dca; #endif lsb = irq_table[i].lsb; handler = irq_table[i].handler; snprintf(dd->cspec->msix_entries[msixnum].name, sizeof(dd->cspec->msix_entries[msixnum].name) - 1, QIB_DRV_NAME "%d%s", dd->unit, irq_table[i].name); } else { unsigned ctxt; ctxt = i - ARRAY_SIZE(irq_table); /* per krcvq context receive interrupt */ arg = dd->rcd[ctxt]; if (!arg) continue; if (qib_krcvq01_no_msi && ctxt < 2) continue; #ifdef CONFIG_INFINIBAND_QIB_DCA dca = 1; #endif lsb = QIB_I_RCVAVAIL_LSB + ctxt; handler = qib_7322pintr; snprintf(dd->cspec->msix_entries[msixnum].name, sizeof(dd->cspec->msix_entries[msixnum].name) - 1, QIB_DRV_NAME "%d (kctx)", dd->unit); } dd->cspec->msix_entries[msixnum].irq = pci_irq_vector( dd->pcidev, msixnum); if (dd->cspec->msix_entries[msixnum].irq < 0) { qib_dev_err(dd, "Couldn't get MSIx irq (vec=%d): %d\n", msixnum, dd->cspec->msix_entries[msixnum].irq); qib_7322_nomsix(dd); goto try_intx; } ret = request_irq(dd->cspec->msix_entries[msixnum].irq, handler, 0, dd->cspec->msix_entries[msixnum].name, arg); if (ret) { /* * Shouldn't happen since the enable said we could * have as many as we are trying to setup here. */ qib_dev_err(dd, "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n", msixnum, dd->cspec->msix_entries[msixnum].irq, ret); qib_7322_nomsix(dd); goto try_intx; } dd->cspec->msix_entries[msixnum].arg = arg; #ifdef CONFIG_INFINIBAND_QIB_DCA dd->cspec->msix_entries[msixnum].dca = dca; dd->cspec->msix_entries[msixnum].rcv = handler == qib_7322pintr; #endif if (lsb >= 0) { reg = lsb / IBA7322_REDIRECT_VEC_PER_REG; sh = (lsb % IBA7322_REDIRECT_VEC_PER_REG) * SYM_LSB(IntRedirect0, vec1); mask &= ~(1ULL << lsb); redirect[reg] |= ((u64) msixnum) << sh; } val = qib_read_kreg64(dd, 2 * msixnum + 1 + (QIB_7322_MsixTable_OFFS / sizeof(u64))); if (firstcpu < nr_cpu_ids && zalloc_cpumask_var( &dd->cspec->msix_entries[msixnum].mask, GFP_KERNEL)) { if (handler == qib_7322pintr) { cpumask_set_cpu(currrcvcpu, dd->cspec->msix_entries[msixnum].mask); currrcvcpu = cpumask_next(currrcvcpu, local_mask); if (currrcvcpu >= nr_cpu_ids) currrcvcpu = secondcpu; } else { cpumask_set_cpu(firstcpu, dd->cspec->msix_entries[msixnum].mask); } irq_set_affinity_hint( dd->cspec->msix_entries[msixnum].irq, dd->cspec->msix_entries[msixnum].mask); } msixnum++; } /* Initialize the vector mapping */ for (i = 0; i < ARRAY_SIZE(redirect); i++) qib_write_kreg(dd, kr_intredirect + i, redirect[i]); dd->cspec->main_int_mask = mask; tasklet_init(&dd->error_tasklet, qib_error_tasklet, (unsigned long)dd); bail:; } /** * qib_7322_boardname - fill in the board name and note features * @dd: the qlogic_ib device * * info will be based on the board revision register */ static unsigned qib_7322_boardname(struct qib_devdata *dd) { /* Will need enumeration of board-types here */ u32 boardid; unsigned int features = DUAL_PORT_CAP; boardid = SYM_FIELD(dd->revision, Revision, BoardID); switch (boardid) { case 0: dd->boardname = "InfiniPath_QLE7342_Emulation"; break; case 1: dd->boardname = "InfiniPath_QLE7340"; dd->flags |= QIB_HAS_QSFP; features = PORT_SPD_CAP; break; case 2: dd->boardname = "InfiniPath_QLE7342"; dd->flags |= QIB_HAS_QSFP; break; case 3: dd->boardname = "InfiniPath_QMI7342"; break; case 4: dd->boardname = "InfiniPath_Unsupported7342"; qib_dev_err(dd, "Unsupported version of QMH7342\n"); features = 0; break; case BOARD_QMH7342: dd->boardname = "InfiniPath_QMH7342"; features = 0x24; break; case BOARD_QME7342: dd->boardname = "InfiniPath_QME7342"; break; case 8: dd->boardname = "InfiniPath_QME7362"; dd->flags |= QIB_HAS_QSFP; break; case BOARD_QMH7360: dd->boardname = "Intel IB QDR 1P FLR-QSFP Adptr"; dd->flags |= QIB_HAS_QSFP; break; case 15: dd->boardname = "InfiniPath_QLE7342_TEST"; dd->flags |= QIB_HAS_QSFP; break; default: dd->boardname = "InfiniPath_QLE73xy_UNKNOWN"; qib_dev_err(dd, "Unknown 7322 board type %u\n", boardid); break; } dd->board_atten = 1; /* index into txdds_Xdr */ snprintf(dd->boardversion, sizeof(dd->boardversion), "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch), dd->majrev, dd->minrev, (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW)); if (qib_singleport && (features >> PORT_SPD_CAP_SHIFT) & PORT_SPD_CAP) { qib_devinfo(dd->pcidev, "IB%u: Forced to single port mode by module parameter\n", dd->unit); features &= PORT_SPD_CAP; } return features; } /* * This routine sleeps, so it can only be called from user context, not * from interrupt context. */ static int qib_do_7322_reset(struct qib_devdata *dd) { u64 val; u64 *msix_vecsave = NULL; int i, msix_entries, ret = 1; u16 cmdval; u8 int_line, clinesz; unsigned long flags; /* Use dev_err so it shows up in logs, etc. */ qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); msix_entries = dd->cspec->num_msix_entries; /* no interrupts till re-initted */ qib_7322_set_intr_state(dd, 0); if (msix_entries) { qib_7322_nomsix(dd); /* can be up to 512 bytes, too big for stack */ msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries * sizeof(u64), GFP_KERNEL); } /* * Core PCI (as of 2.6.18) doesn't save or rewrite the full vector * info that is set up by the BIOS, so we have to save and restore * it ourselves. There is some risk something could change it, * after we save it, but since we have disabled the MSIx, it * shouldn't be touched... */ for (i = 0; i < msix_entries; i++) { u64 vecaddr, vecdata; vecaddr = qib_read_kreg64(dd, 2 * i + (QIB_7322_MsixTable_OFFS / sizeof(u64))); vecdata = qib_read_kreg64(dd, 1 + 2 * i + (QIB_7322_MsixTable_OFFS / sizeof(u64))); if (msix_vecsave) { msix_vecsave[2 * i] = vecaddr; /* save it without the masked bit set */ msix_vecsave[1 + 2 * i] = vecdata & ~0x100000000ULL; } } dd->pport->cpspec->ibdeltainprog = 0; dd->pport->cpspec->ibsymdelta = 0; dd->pport->cpspec->iblnkerrdelta = 0; dd->pport->cpspec->ibmalfdelta = 0; /* so we check interrupts work again */ dd->z_int_counter = qib_int_counter(dd); /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); dd->flags |= QIB_DOING_RESET; val = dd->control | QLOGIC_IB_C_RESET; writeq(val, &dd->kregbase[kr_control]); for (i = 1; i <= 5; i++) { /* * Allow MBIST, etc. to complete; longer on each retry. * We sometimes get machine checks from bus timeout if no * response, so for now, make it *really* long. */ msleep(1000 + (1 + i) * 3000); qib_pcie_reenable(dd, cmdval, int_line, clinesz); /* * Use readq directly, so we don't need to mark it as PRESENT * until we get a successful indication that all is well. */ val = readq(&dd->kregbase[kr_revision]); if (val == dd->revision) break; if (i == 5) { qib_dev_err(dd, "Failed to initialize after reset, unusable\n"); ret = 0; goto bail; } } dd->flags |= QIB_PRESENT; /* it's back */ if (msix_entries) { /* restore the MSIx vector address and data if saved above */ for (i = 0; i < msix_entries; i++) { if (!msix_vecsave || !msix_vecsave[2 * i]) continue; qib_write_kreg(dd, 2 * i + (QIB_7322_MsixTable_OFFS / sizeof(u64)), msix_vecsave[2 * i]); qib_write_kreg(dd, 1 + 2 * i + (QIB_7322_MsixTable_OFFS / sizeof(u64)), msix_vecsave[1 + 2 * i]); } } /* initialize the remaining registers. */ for (i = 0; i < dd->num_pports; ++i) write_7322_init_portregs(&dd->pport[i]); write_7322_initregs(dd); if (qib_pcie_params(dd, dd->lbus_width, &dd->cspec->num_msix_entries)) qib_dev_err(dd, "Reset failed to setup PCIe or interrupts; continuing anyway\n"); qib_setup_7322_interrupt(dd, 1); for (i = 0; i < dd->num_pports; ++i) { struct qib_pportdata *ppd = &dd->pport[i]; spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags |= QIBL_IB_FORCE_NOTIFY; ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } bail: dd->flags &= ~QIB_DOING_RESET; /* OK or not, no longer resetting */ kfree(msix_vecsave); return ret; } /** * qib_7322_put_tid - write a TID to the chip * @dd: the qlogic_ib device * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: 0 for eager, 1 for expected * @pa: physical address of in memory buffer; tidinvalid if freeing */ static void qib_7322_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, u32 type, unsigned long pa) { if (!(dd->flags & QIB_PRESENT)) return; if (pa != dd->tidinvalid) { u64 chippa = pa >> IBA7322_TID_PA_SHIFT; /* paranoia checks */ if (pa != (chippa << IBA7322_TID_PA_SHIFT)) { qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", pa); return; } if (chippa >= (1UL << IBA7322_TID_SZ_SHIFT)) { qib_dev_err(dd, "Physical page address 0x%lx larger than supported\n", pa); return; } if (type == RCVHQ_RCV_TYPE_EAGER) chippa |= dd->tidtemplate; else /* for now, always full 4KB page */ chippa |= IBA7322_TID_SZ_4K; pa = chippa; } writeq(pa, tidptr); mmiowb(); } /** * qib_7322_clear_tids - clear all TID entries for a ctxt, expected and eager * @dd: the qlogic_ib device * @ctxt: the ctxt * * clear all TID entries for a ctxt, expected and eager. * Used from qib_close(). */ static void qib_7322_clear_tids(struct qib_devdata *dd, struct qib_ctxtdata *rcd) { u64 __iomem *tidbase; unsigned long tidinv; u32 ctxt; int i; if (!dd->kregbase || !rcd) return; ctxt = rcd->ctxt; tidinv = dd->tidinvalid; tidbase = (u64 __iomem *) ((char __iomem *) dd->kregbase + dd->rcvtidbase + ctxt * dd->rcvtidcnt * sizeof(*tidbase)); for (i = 0; i < dd->rcvtidcnt; i++) qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, tidinv); tidbase = (u64 __iomem *) ((char __iomem *) dd->kregbase + dd->rcvegrbase + rcd->rcvegr_tid_base * sizeof(*tidbase)); for (i = 0; i < rcd->rcvegrcnt; i++) qib_7322_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, tidinv); } /** * qib_7322_tidtemplate - setup constants for TID updates * @dd: the qlogic_ib device * * We setup stuff that we use a lot, to avoid calculating each time */ static void qib_7322_tidtemplate(struct qib_devdata *dd) { /* * For now, we always allocate 4KB buffers (at init) so we can * receive max size packets. We may want a module parameter to * specify 2KB or 4KB and/or make it per port instead of per device * for those who want to reduce memory footprint. Note that the * rcvhdrentsize size must be large enough to hold the largest * IB header (currently 96 bytes) that we expect to handle (plus of * course the 2 dwords of RHF). */ if (dd->rcvegrbufsize == 2048) dd->tidtemplate = IBA7322_TID_SZ_2K; else if (dd->rcvegrbufsize == 4096) dd->tidtemplate = IBA7322_TID_SZ_4K; dd->tidinvalid = 0; } /** * qib_init_7322_get_base_info - set chip-specific flags for user code * @rcd: the qlogic_ib ctxt * @kbase: qib_base_info pointer * * We set the PCIE flag because the lower bandwidth on PCIe vs * HyperTransport can affect some user packet algorithims. */ static int qib_7322_get_base_info(struct qib_ctxtdata *rcd, struct qib_base_info *kinfo) { kinfo->spi_runtime_flags |= QIB_RUNTIME_CTXT_MSB_IN_QP | QIB_RUNTIME_PCIE | QIB_RUNTIME_NODMA_RTAIL | QIB_RUNTIME_HDRSUPP | QIB_RUNTIME_SDMA; if (rcd->dd->cspec->r1) kinfo->spi_runtime_flags |= QIB_RUNTIME_RCHK; if (rcd->dd->flags & QIB_USE_SPCL_TRIG) kinfo->spi_runtime_flags |= QIB_RUNTIME_SPECIAL_TRIGGER; return 0; } static struct qib_message_header * qib_7322_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) { u32 offset = qib_hdrget_offset(rhf_addr); return (struct qib_message_header *) (rhf_addr - dd->rhf_offset + offset); } /* * Configure number of contexts. */ static void qib_7322_config_ctxts(struct qib_devdata *dd) { unsigned long flags; u32 nchipctxts; nchipctxts = qib_read_kreg32(dd, kr_contextcnt); dd->cspec->numctxts = nchipctxts; if (qib_n_krcv_queues > 1 && dd->num_pports) { dd->first_user_ctxt = NUM_IB_PORTS + (qib_n_krcv_queues - 1) * dd->num_pports; if (dd->first_user_ctxt > nchipctxts) dd->first_user_ctxt = nchipctxts; dd->n_krcv_queues = dd->first_user_ctxt / dd->num_pports; } else { dd->first_user_ctxt = NUM_IB_PORTS; dd->n_krcv_queues = 1; } if (!qib_cfgctxts) { int nctxts = dd->first_user_ctxt + num_online_cpus(); if (nctxts <= 6) dd->ctxtcnt = 6; else if (nctxts <= 10) dd->ctxtcnt = 10; else if (nctxts <= nchipctxts) dd->ctxtcnt = nchipctxts; } else if (qib_cfgctxts < dd->num_pports) dd->ctxtcnt = dd->num_pports; else if (qib_cfgctxts <= nchipctxts) dd->ctxtcnt = qib_cfgctxts; if (!dd->ctxtcnt) /* none of the above, set to max */ dd->ctxtcnt = nchipctxts; /* * Chip can be configured for 6, 10, or 18 ctxts, and choice * affects number of eager TIDs per ctxt (1K, 2K, 4K). * Lock to be paranoid about later motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); if (dd->ctxtcnt > 10) dd->rcvctrl |= 2ULL << SYM_LSB(RcvCtrl, ContextCfg); else if (dd->ctxtcnt > 6) dd->rcvctrl |= 1ULL << SYM_LSB(RcvCtrl, ContextCfg); /* else configure for default 6 receive ctxts */ /* The XRC opcode is 5. */ dd->rcvctrl |= 5ULL << SYM_LSB(RcvCtrl, XrcTypeCode); /* * RcvCtrl *must* be written here so that the * chip understands how to change rcvegrcnt below. */ qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); /* kr_rcvegrcnt changes based on the number of contexts enabled */ dd->cspec->rcvegrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); if (qib_rcvhdrcnt) dd->rcvhdrcnt = max(dd->cspec->rcvegrcnt, qib_rcvhdrcnt); else dd->rcvhdrcnt = 2 * max(dd->cspec->rcvegrcnt, dd->num_pports > 1 ? 1024U : 2048U); } static int qib_7322_get_ib_cfg(struct qib_pportdata *ppd, int which) { int lsb, ret = 0; u64 maskr; /* right-justified mask */ switch (which) { case QIB_IB_CFG_LWID_ENB: /* Get allowed Link-width */ ret = ppd->link_width_enabled; goto done; case QIB_IB_CFG_LWID: /* Get currently active Link-width */ ret = ppd->link_width_active; goto done; case QIB_IB_CFG_SPD_ENB: /* Get allowed Link speeds */ ret = ppd->link_speed_enabled; goto done; case QIB_IB_CFG_SPD: /* Get current Link spd */ ret = ppd->link_speed_active; goto done; case QIB_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */ lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); break; case QIB_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */ lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); break; case QIB_IB_CFG_LINKLATENCY: ret = qib_read_kreg_port(ppd, krp_ibcstatus_b) & SYM_MASK(IBCStatusB_0, LinkRoundTripLatency); goto done; case QIB_IB_CFG_OP_VLS: ret = ppd->vls_operational; goto done; case QIB_IB_CFG_VL_HIGH_CAP: ret = 16; goto done; case QIB_IB_CFG_VL_LOW_CAP: ret = 16; goto done; case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, OverrunThreshold); goto done; case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ ret = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, PhyerrThreshold); goto done; case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ /* will only take effect when the link state changes */ ret = (ppd->cpspec->ibcctrl_a & SYM_MASK(IBCCtrlA_0, LinkDownDefaultState)) ? IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; goto done; case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ lsb = IBA7322_IBC_HRTBT_LSB; maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ break; case QIB_IB_CFG_PMA_TICKS: /* * 0x00 = 10x link transfer rate or 4 nsec. for 2.5Gbs * Since the clock is always 250MHz, the value is 3, 1 or 0. */ if (ppd->link_speed_active == QIB_IB_QDR) ret = 3; else if (ppd->link_speed_active == QIB_IB_DDR) ret = 1; else ret = 0; goto done; default: ret = -EINVAL; goto done; } ret = (int)((ppd->cpspec->ibcctrl_b >> lsb) & maskr); done: return ret; } /* * Below again cribbed liberally from older version. Do not lean * heavily on it. */ #define IBA7322_IBC_DLIDLMC_SHIFT QIB_7322_IBCCtrlB_0_IB_DLID_LSB #define IBA7322_IBC_DLIDLMC_MASK (QIB_7322_IBCCtrlB_0_IB_DLID_RMASK \ | (QIB_7322_IBCCtrlB_0_IB_DLID_MASK_RMASK << 16)) static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) { struct qib_devdata *dd = ppd->dd; u64 maskr; /* right-justified mask */ int lsb, ret = 0; u16 lcmd, licmd; unsigned long flags; switch (which) { case QIB_IB_CFG_LIDLMC: /* * Set LID and LMC. Combined to avoid possible hazard * caller puts LMC in 16MSbits, DLID in 16LSbits of val */ lsb = IBA7322_IBC_DLIDLMC_SHIFT; maskr = IBA7322_IBC_DLIDLMC_MASK; /* * For header-checking, the SLID in the packet will * be masked with SendIBSLMCMask, and compared * with SendIBSLIDAssignMask. Make sure we do not * set any bits not covered by the mask, or we get * false-positives. */ qib_write_kreg_port(ppd, krp_sendslid, val & (val >> 16) & SendIBSLIDAssignMask); qib_write_kreg_port(ppd, krp_sendslidmask, (val >> 16) & SendIBSLMCMask); break; case QIB_IB_CFG_LWID_ENB: /* set allowed Link-width */ ppd->link_width_enabled = val; /* convert IB value to chip register value */ if (val == IB_WIDTH_1X) val = 0; else if (val == IB_WIDTH_4X) val = 1; else val = 3; maskr = SYM_RMASK(IBCCtrlB_0, IB_NUM_CHANNELS); lsb = SYM_LSB(IBCCtrlB_0, IB_NUM_CHANNELS); break; case QIB_IB_CFG_SPD_ENB: /* set allowed Link speeds */ /* * As with width, only write the actual register if the * link is currently down, otherwise takes effect on next * link change. Since setting is being explicitly requested * (via MAD or sysfs), clear autoneg failure status if speed * autoneg is enabled. */ ppd->link_speed_enabled = val; val <<= IBA7322_IBC_SPEED_LSB; maskr = IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | IBA7322_IBC_MAX_SPEED_MASK; if (val & (val - 1)) { /* Muliple speeds enabled */ val |= IBA7322_IBC_IBTA_1_2_MASK | IBA7322_IBC_MAX_SPEED_MASK; spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } else if (val & IBA7322_IBC_SPEED_QDR) val |= IBA7322_IBC_IBTA_1_2_MASK; /* IBTA 1.2 mode + min/max + speed bits are contiguous */ lsb = SYM_LSB(IBCCtrlB_0, IB_ENHANCED_MODE); break; case QIB_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */ lsb = SYM_LSB(IBCCtrlB_0, IB_POLARITY_REV_SUPP); maskr = SYM_RMASK(IBCCtrlB_0, IB_POLARITY_REV_SUPP); break; case QIB_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */ lsb = SYM_LSB(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); maskr = SYM_RMASK(IBCCtrlB_0, IB_LANE_REV_SUPPORTED); break; case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, OverrunThreshold); if (maskr != val) { ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, OverrunThreshold); ppd->cpspec->ibcctrl_a |= (u64) val << SYM_LSB(IBCCtrlA_0, OverrunThreshold); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); } goto bail; case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ maskr = SYM_FIELD(ppd->cpspec->ibcctrl_a, IBCCtrlA_0, PhyerrThreshold); if (maskr != val) { ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, PhyerrThreshold); ppd->cpspec->ibcctrl_a |= (u64) val << SYM_LSB(IBCCtrlA_0, PhyerrThreshold); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); } goto bail; case QIB_IB_CFG_PKEYS: /* update pkeys */ maskr = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | ((u64) ppd->pkeys[2] << 32) | ((u64) ppd->pkeys[3] << 48); qib_write_kreg_port(ppd, krp_partitionkey, maskr); goto bail; case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ /* will only take effect when the link state changes */ if (val == IB_LINKINITCMD_POLL) ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); else /* SLEEP */ ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, LinkDownDefaultState); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); goto bail; case QIB_IB_CFG_MTU: /* update the MTU in IBC */ /* * Update our housekeeping variables, and set IBC max * size, same as init code; max IBC is max we allow in * buffer, less the qword pbc, plus 1 for ICRC, in dwords * Set even if it's unchanged, print debug message only * on changes. */ val = (ppd->ibmaxlen >> 2) + 1; ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, MaxPktLen); ppd->cpspec->ibcctrl_a |= (u64)val << SYM_LSB(IBCCtrlA_0, MaxPktLen); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); goto bail; case QIB_IB_CFG_LSTATE: /* set the IB link state */ switch (val & 0xffff0000) { case IB_LINKCMD_DOWN: lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; ppd->cpspec->ibmalfusesnap = 1; ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, crp_errlink); if (!ppd->cpspec->ibdeltainprog && qib_compat_ddr_negotiate) { ppd->cpspec->ibdeltainprog = 1; ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, crp_ibsymbolerr); ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, crp_iblinkerrrecov); } break; case IB_LINKCMD_ARMED: lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; if (ppd->cpspec->ibmalfusesnap) { ppd->cpspec->ibmalfusesnap = 0; ppd->cpspec->ibmalfdelta += read_7322_creg32_port(ppd, crp_errlink) - ppd->cpspec->ibmalfsnap; } break; case IB_LINKCMD_ACTIVE: lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; break; default: ret = -EINVAL; qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); goto bail; } switch (val & 0xffff) { case IB_LINKINITCMD_NOP: licmd = 0; break; case IB_LINKINITCMD_POLL: licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; break; case IB_LINKINITCMD_SLEEP: licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; break; case IB_LINKINITCMD_DISABLE: licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; ppd->cpspec->chase_end = 0; /* * stop state chase counter and timer, if running. * wait forpending timer, but don't clear .data (ppd)! */ if (ppd->cpspec->chase_timer.expires) { del_timer_sync(&ppd->cpspec->chase_timer); ppd->cpspec->chase_timer.expires = 0; } break; default: ret = -EINVAL; qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", val & 0xffff); goto bail; } qib_set_ib_7322_lstate(ppd, lcmd, licmd); goto bail; case QIB_IB_CFG_OP_VLS: if (ppd->vls_operational != val) { ppd->vls_operational = val; set_vls(ppd); } goto bail; case QIB_IB_CFG_VL_HIGH_LIMIT: qib_write_kreg_port(ppd, krp_highprio_limit, val); goto bail; case QIB_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */ if (val > 3) { ret = -EINVAL; goto bail; } lsb = IBA7322_IBC_HRTBT_LSB; maskr = IBA7322_IBC_HRTBT_RMASK; /* OR of AUTO and ENB */ break; case QIB_IB_CFG_PORT: /* val is the port number of the switch we are connected to. */ if (ppd->dd->cspec->r1) { cancel_delayed_work(&ppd->cpspec->ipg_work); ppd->cpspec->ipg_tries = 0; } goto bail; default: ret = -EINVAL; goto bail; } ppd->cpspec->ibcctrl_b &= ~(maskr << lsb); ppd->cpspec->ibcctrl_b |= (((u64) val & maskr) << lsb); qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); qib_write_kreg(dd, kr_scratch, 0); bail: return ret; } static int qib_7322_set_loopback(struct qib_pportdata *ppd, const char *what) { int ret = 0; u64 val, ctrlb; /* only IBC loopback, may add serdes and xgxs loopbacks later */ if (!strncmp(what, "ibc", 3)) { ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, Loopback); val = 0; /* disable heart beat, so link will come up */ qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", ppd->dd->unit, ppd->port); } else if (!strncmp(what, "off", 3)) { ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, Loopback); /* enable heart beat again */ val = IBA7322_IBC_HRTBT_RMASK << IBA7322_IBC_HRTBT_LSB; qib_devinfo(ppd->dd->pcidev, "Disabling IB%u:%u IBC loopback (normal)\n", ppd->dd->unit, ppd->port); } else ret = -EINVAL; if (!ret) { qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); ctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_HRTBT_MASK << IBA7322_IBC_HRTBT_LSB); ppd->cpspec->ibcctrl_b = ctrlb | val; qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); qib_write_kreg(ppd->dd, kr_scratch, 0); } return ret; } static void get_vl_weights(struct qib_pportdata *ppd, unsigned regno, struct ib_vl_weight_elem *vl) { unsigned i; for (i = 0; i < 16; i++, regno++, vl++) { u32 val = qib_read_kreg_port(ppd, regno); vl->vl = (val >> SYM_LSB(LowPriority0_0, VirtualLane)) & SYM_RMASK(LowPriority0_0, VirtualLane); vl->weight = (val >> SYM_LSB(LowPriority0_0, Weight)) & SYM_RMASK(LowPriority0_0, Weight); } } static void set_vl_weights(struct qib_pportdata *ppd, unsigned regno, struct ib_vl_weight_elem *vl) { unsigned i; for (i = 0; i < 16; i++, regno++, vl++) { u64 val; val = ((vl->vl & SYM_RMASK(LowPriority0_0, VirtualLane)) << SYM_LSB(LowPriority0_0, VirtualLane)) | ((vl->weight & SYM_RMASK(LowPriority0_0, Weight)) << SYM_LSB(LowPriority0_0, Weight)); qib_write_kreg_port(ppd, regno, val); } if (!(ppd->p_sendctrl & SYM_MASK(SendCtrl_0, IBVLArbiterEn))) { struct qib_devdata *dd = ppd->dd; unsigned long flags; spin_lock_irqsave(&dd->sendctrl_lock, flags); ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, IBVLArbiterEn); qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); qib_write_kreg(dd, kr_scratch, 0); spin_unlock_irqrestore(&dd->sendctrl_lock, flags); } } static int qib_7322_get_ib_table(struct qib_pportdata *ppd, int which, void *t) { switch (which) { case QIB_IB_TBL_VL_HIGH_ARB: get_vl_weights(ppd, krp_highprio_0, t); break; case QIB_IB_TBL_VL_LOW_ARB: get_vl_weights(ppd, krp_lowprio_0, t); break; default: return -EINVAL; } return 0; } static int qib_7322_set_ib_table(struct qib_pportdata *ppd, int which, void *t) { switch (which) { case QIB_IB_TBL_VL_HIGH_ARB: set_vl_weights(ppd, krp_highprio_0, t); break; case QIB_IB_TBL_VL_LOW_ARB: set_vl_weights(ppd, krp_lowprio_0, t); break; default: return -EINVAL; } return 0; } static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd, u32 updegr, u32 egrhd, u32 npkts) { /* * Need to write timeout register before updating rcvhdrhead to ensure * that the timer is enabled on reception of a packet. */ if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT) adjust_rcv_timeout(rcd, npkts); if (updegr) qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); mmiowb(); qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); mmiowb(); } static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd) { u32 head, tail; head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); if (rcd->rcvhdrtail_kvaddr) tail = qib_get_rcvhdrtail(rcd); else tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); return head == tail; } #define RCVCTRL_COMMON_MODS (QIB_RCVCTRL_CTXT_ENB | \ QIB_RCVCTRL_CTXT_DIS | \ QIB_RCVCTRL_TIDFLOW_ENB | \ QIB_RCVCTRL_TIDFLOW_DIS | \ QIB_RCVCTRL_TAILUPD_ENB | \ QIB_RCVCTRL_TAILUPD_DIS | \ QIB_RCVCTRL_INTRAVAIL_ENB | \ QIB_RCVCTRL_INTRAVAIL_DIS | \ QIB_RCVCTRL_BP_ENB | \ QIB_RCVCTRL_BP_DIS) #define RCVCTRL_PORT_MODS (QIB_RCVCTRL_CTXT_ENB | \ QIB_RCVCTRL_CTXT_DIS | \ QIB_RCVCTRL_PKEY_DIS | \ QIB_RCVCTRL_PKEY_ENB) /* * Modify the RCVCTRL register in chip-specific way. This * is a function because bit positions and (future) register * location is chip-specifc, but the needed operations are * generic. is a bit-mask because we often want to * do multiple modifications. */ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op, int ctxt) { struct qib_devdata *dd = ppd->dd; struct qib_ctxtdata *rcd; u64 mask, val; unsigned long flags; spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); if (op & QIB_RCVCTRL_TIDFLOW_ENB) dd->rcvctrl |= SYM_MASK(RcvCtrl, TidFlowEnable); if (op & QIB_RCVCTRL_TIDFLOW_DIS) dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TidFlowEnable); if (op & QIB_RCVCTRL_TAILUPD_ENB) dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); if (op & QIB_RCVCTRL_TAILUPD_DIS) dd->rcvctrl &= ~SYM_MASK(RcvCtrl, TailUpd); if (op & QIB_RCVCTRL_PKEY_ENB) ppd->p_rcvctrl &= ~SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); if (op & QIB_RCVCTRL_PKEY_DIS) ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvPartitionKeyDisable); if (ctxt < 0) { mask = (1ULL << dd->ctxtcnt) - 1; rcd = NULL; } else { mask = (1ULL << ctxt); rcd = dd->rcd[ctxt]; } if ((op & QIB_RCVCTRL_CTXT_ENB) && rcd) { ppd->p_rcvctrl |= (mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); if (!(dd->flags & QIB_NODMA_RTAIL)) { op |= QIB_RCVCTRL_TAILUPD_ENB; /* need reg write */ dd->rcvctrl |= SYM_MASK(RcvCtrl, TailUpd); } /* Write these registers before the context is enabled. */ qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, rcd->rcvhdrqtailaddr_phys); qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, rcd->rcvhdrq_phys); rcd->seq_cnt = 1; } if (op & QIB_RCVCTRL_CTXT_DIS) ppd->p_rcvctrl &= ~(mask << SYM_LSB(RcvCtrl_0, ContextEnableKernel)); if (op & QIB_RCVCTRL_BP_ENB) dd->rcvctrl |= mask << SYM_LSB(RcvCtrl, dontDropRHQFull); if (op & QIB_RCVCTRL_BP_DIS) dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, dontDropRHQFull)); if (op & QIB_RCVCTRL_INTRAVAIL_ENB) dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, IntrAvail)); if (op & QIB_RCVCTRL_INTRAVAIL_DIS) dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, IntrAvail)); /* * Decide which registers to write depending on the ops enabled. * Special case is "flush" (no bits set at all) * which needs to write both. */ if (op == 0 || (op & RCVCTRL_COMMON_MODS)) qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); if (op == 0 || (op & RCVCTRL_PORT_MODS)) qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); if ((op & QIB_RCVCTRL_CTXT_ENB) && dd->rcd[ctxt]) { /* * Init the context registers also; if we were * disabled, tail and head should both be zero * already from the enable, but since we don't * know, we have to do it explicitly. */ val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); /* be sure enabling write seen; hd/tl should be 0 */ (void) qib_read_kreg32(dd, kr_scratch); val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); dd->rcd[ctxt]->head = val; /* If kctxt, interrupt on next receive. */ if (ctxt < dd->first_user_ctxt) val |= dd->rhdrhead_intr_off; qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); } else if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rcd[ctxt] && dd->rhdrhead_intr_off) { /* arm rcv interrupt */ val = dd->rcd[ctxt]->head | dd->rhdrhead_intr_off; qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); } if (op & QIB_RCVCTRL_CTXT_DIS) { unsigned f; /* Now that the context is disabled, clear these registers. */ if (ctxt >= 0) { qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, ctxt, 0); qib_write_kreg_ctxt(dd, krc_rcvhdraddr, ctxt, 0); for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) qib_write_ureg(dd, ur_rcvflowtable + f, TIDFLOW_ERRBITS, ctxt); } else { unsigned i; for (i = 0; i < dd->cfgctxts; i++) { qib_write_kreg_ctxt(dd, krc_rcvhdrtailaddr, i, 0); qib_write_kreg_ctxt(dd, krc_rcvhdraddr, i, 0); for (f = 0; f < NUM_TIDFLOWS_CTXT; f++) qib_write_ureg(dd, ur_rcvflowtable + f, TIDFLOW_ERRBITS, i); } } } spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); } /* * Modify the SENDCTRL register in chip-specific way. This * is a function where there are multiple such registers with * slightly different layouts. * The chip doesn't allow back-to-back sendctrl writes, so write * the scratch register after writing sendctrl. * * Which register is written depends on the operation. * Most operate on the common register, while * SEND_ENB and SEND_DIS operate on the per-port ones. * SEND_ENB is included in common because it can change SPCL_TRIG */ #define SENDCTRL_COMMON_MODS (\ QIB_SENDCTRL_CLEAR | \ QIB_SENDCTRL_AVAIL_DIS | \ QIB_SENDCTRL_AVAIL_ENB | \ QIB_SENDCTRL_AVAIL_BLIP | \ QIB_SENDCTRL_DISARM | \ QIB_SENDCTRL_DISARM_ALL | \ QIB_SENDCTRL_SEND_ENB) #define SENDCTRL_PORT_MODS (\ QIB_SENDCTRL_CLEAR | \ QIB_SENDCTRL_SEND_ENB | \ QIB_SENDCTRL_SEND_DIS | \ QIB_SENDCTRL_FLUSH) static void sendctrl_7322_mod(struct qib_pportdata *ppd, u32 op) { struct qib_devdata *dd = ppd->dd; u64 tmp_dd_sendctrl; unsigned long flags; spin_lock_irqsave(&dd->sendctrl_lock, flags); /* First the dd ones that are "sticky", saved in shadow */ if (op & QIB_SENDCTRL_CLEAR) dd->sendctrl = 0; if (op & QIB_SENDCTRL_AVAIL_DIS) dd->sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); else if (op & QIB_SENDCTRL_AVAIL_ENB) { dd->sendctrl |= SYM_MASK(SendCtrl, SendBufAvailUpd); if (dd->flags & QIB_USE_SPCL_TRIG) dd->sendctrl |= SYM_MASK(SendCtrl, SpecialTriggerEn); } /* Then the ppd ones that are "sticky", saved in shadow */ if (op & QIB_SENDCTRL_SEND_DIS) ppd->p_sendctrl &= ~SYM_MASK(SendCtrl_0, SendEnable); else if (op & QIB_SENDCTRL_SEND_ENB) ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, SendEnable); if (op & QIB_SENDCTRL_DISARM_ALL) { u32 i, last; tmp_dd_sendctrl = dd->sendctrl; last = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; /* * Disarm any buffers that are not yet launched, * disabling updates until done. */ tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); for (i = 0; i < last; i++) { qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl | SYM_MASK(SendCtrl, Disarm) | i); qib_write_kreg(dd, kr_scratch, 0); } } if (op & QIB_SENDCTRL_FLUSH) { u64 tmp_ppd_sendctrl = ppd->p_sendctrl; /* * Now drain all the fifos. The Abort bit should never be * needed, so for now, at least, we don't use it. */ tmp_ppd_sendctrl |= SYM_MASK(SendCtrl_0, TxeDrainRmFifo) | SYM_MASK(SendCtrl_0, TxeDrainLaFifo) | SYM_MASK(SendCtrl_0, TxeBypassIbc); qib_write_kreg_port(ppd, krp_sendctrl, tmp_ppd_sendctrl); qib_write_kreg(dd, kr_scratch, 0); } tmp_dd_sendctrl = dd->sendctrl; if (op & QIB_SENDCTRL_DISARM) tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | ((op & QIB_7322_SendCtrl_DisarmSendBuf_RMASK) << SYM_LSB(SendCtrl, DisarmSendBuf)); if ((op & QIB_SENDCTRL_AVAIL_BLIP) && (dd->sendctrl & SYM_MASK(SendCtrl, SendBufAvailUpd))) tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, SendBufAvailUpd); if (op == 0 || (op & SENDCTRL_COMMON_MODS)) { qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); qib_write_kreg(dd, kr_scratch, 0); } if (op == 0 || (op & SENDCTRL_PORT_MODS)) { qib_write_kreg_port(ppd, krp_sendctrl, ppd->p_sendctrl); qib_write_kreg(dd, kr_scratch, 0); } if (op & QIB_SENDCTRL_AVAIL_BLIP) { qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); qib_write_kreg(dd, kr_scratch, 0); } spin_unlock_irqrestore(&dd->sendctrl_lock, flags); if (op & QIB_SENDCTRL_FLUSH) { u32 v; /* * ensure writes have hit chip, then do a few * more reads, to allow DMA of pioavail registers * to occur, so in-memory copy is in sync with * the chip. Not always safe to sleep. */ v = qib_read_kreg32(dd, kr_scratch); qib_write_kreg(dd, kr_scratch, v); v = qib_read_kreg32(dd, kr_scratch); qib_write_kreg(dd, kr_scratch, v); qib_read_kreg32(dd, kr_scratch); } } #define _PORT_VIRT_FLAG 0x8000U /* "virtual", need adjustments */ #define _PORT_64BIT_FLAG 0x10000U /* not "virtual", but 64bit */ #define _PORT_CNTR_IDXMASK 0x7fffU /* mask off flags above */ /** * qib_portcntr_7322 - read a per-port chip counter * @ppd: the qlogic_ib pport * @creg: the counter to read (not a chip offset) */ static u64 qib_portcntr_7322(struct qib_pportdata *ppd, u32 reg) { struct qib_devdata *dd = ppd->dd; u64 ret = 0ULL; u16 creg; /* 0xffff for unimplemented or synthesized counters */ static const u32 xlator[] = { [QIBPORTCNTR_PKTSEND] = crp_pktsend | _PORT_64BIT_FLAG, [QIBPORTCNTR_WORDSEND] = crp_wordsend | _PORT_64BIT_FLAG, [QIBPORTCNTR_PSXMITDATA] = crp_psxmitdatacount, [QIBPORTCNTR_PSXMITPKTS] = crp_psxmitpktscount, [QIBPORTCNTR_PSXMITWAIT] = crp_psxmitwaitcount, [QIBPORTCNTR_SENDSTALL] = crp_sendstall, [QIBPORTCNTR_PKTRCV] = crp_pktrcv | _PORT_64BIT_FLAG, [QIBPORTCNTR_PSRCVDATA] = crp_psrcvdatacount, [QIBPORTCNTR_PSRCVPKTS] = crp_psrcvpktscount, [QIBPORTCNTR_RCVEBP] = crp_rcvebp, [QIBPORTCNTR_RCVOVFL] = crp_rcvovfl, [QIBPORTCNTR_WORDRCV] = crp_wordrcv | _PORT_64BIT_FLAG, [QIBPORTCNTR_RXDROPPKT] = 0xffff, /* not needed for 7322 */ [QIBPORTCNTR_RXLOCALPHYERR] = crp_rxotherlocalphyerr, [QIBPORTCNTR_RXVLERR] = crp_rxvlerr, [QIBPORTCNTR_ERRICRC] = crp_erricrc, [QIBPORTCNTR_ERRVCRC] = crp_errvcrc, [QIBPORTCNTR_ERRLPCRC] = crp_errlpcrc, [QIBPORTCNTR_BADFORMAT] = crp_badformat, [QIBPORTCNTR_ERR_RLEN] = crp_err_rlen, [QIBPORTCNTR_IBSYMBOLERR] = crp_ibsymbolerr, [QIBPORTCNTR_INVALIDRLEN] = crp_invalidrlen, [QIBPORTCNTR_UNSUPVL] = crp_txunsupvl, [QIBPORTCNTR_EXCESSBUFOVFL] = crp_excessbufferovfl, [QIBPORTCNTR_ERRLINK] = crp_errlink, [QIBPORTCNTR_IBLINKDOWN] = crp_iblinkdown, [QIBPORTCNTR_IBLINKERRRECOV] = crp_iblinkerrrecov, [QIBPORTCNTR_LLI] = crp_locallinkintegrityerr, [QIBPORTCNTR_VL15PKTDROP] = crp_vl15droppedpkt, [QIBPORTCNTR_ERRPKEY] = crp_errpkey, /* * the next 3 aren't really counters, but were implemented * as counters in older chips, so still get accessed as * though they were counters from this code. */ [QIBPORTCNTR_PSINTERVAL] = krp_psinterval, [QIBPORTCNTR_PSSTART] = krp_psstart, [QIBPORTCNTR_PSSTAT] = krp_psstat, /* pseudo-counter, summed for all ports */ [QIBPORTCNTR_KHDROVFL] = 0xffff, }; if (reg >= ARRAY_SIZE(xlator)) { qib_devinfo(ppd->dd->pcidev, "Unimplemented portcounter %u\n", reg); goto done; } creg = xlator[reg] & _PORT_CNTR_IDXMASK; /* handle non-counters and special cases first */ if (reg == QIBPORTCNTR_KHDROVFL) { int i; /* sum over all kernel contexts (skip if mini_init) */ for (i = 0; dd->rcd && i < dd->first_user_ctxt; i++) { struct qib_ctxtdata *rcd = dd->rcd[i]; if (!rcd || rcd->ppd != ppd) continue; ret += read_7322_creg32(dd, cr_base_egrovfl + i); } goto done; } else if (reg == QIBPORTCNTR_RXDROPPKT) { /* * Used as part of the synthesis of port_rcv_errors * in the verbs code for IBTA counters. Not needed for 7322, * because all the errors are already counted by other cntrs. */ goto done; } else if (reg == QIBPORTCNTR_PSINTERVAL || reg == QIBPORTCNTR_PSSTART || reg == QIBPORTCNTR_PSSTAT) { /* were counters in older chips, now per-port kernel regs */ ret = qib_read_kreg_port(ppd, creg); goto done; } /* * Only fast increment counters are 64 bits; use 32 bit reads to * avoid two independent reads when on Opteron. */ if (xlator[reg] & _PORT_64BIT_FLAG) ret = read_7322_creg_port(ppd, creg); else ret = read_7322_creg32_port(ppd, creg); if (creg == crp_ibsymbolerr) { if (ppd->cpspec->ibdeltainprog) ret -= ret - ppd->cpspec->ibsymsnap; ret -= ppd->cpspec->ibsymdelta; } else if (creg == crp_iblinkerrrecov) { if (ppd->cpspec->ibdeltainprog) ret -= ret - ppd->cpspec->iblnkerrsnap; ret -= ppd->cpspec->iblnkerrdelta; } else if (creg == crp_errlink) ret -= ppd->cpspec->ibmalfdelta; else if (creg == crp_iblinkdown) ret += ppd->cpspec->iblnkdowndelta; done: return ret; } /* * Device counter names (not port-specific), one line per stat, * single string. Used by utilities like ipathstats to print the stats * in a way which works for different versions of drivers, without changing * the utility. Names need to be 12 chars or less (w/o newline), for proper * display by utility. * Non-error counters are first. * Start of "error" conters is indicated by a leading "E " on the first * "error" counter, and doesn't count in label length. * The EgrOvfl list needs to be last so we truncate them at the configured * context count for the device. * cntr7322indices contains the corresponding register indices. */ static const char cntr7322names[] = "Interrupts\n" "HostBusStall\n" "E RxTIDFull\n" "RxTIDInvalid\n" "RxTIDFloDrop\n" /* 7322 only */ "Ctxt0EgrOvfl\n" "Ctxt1EgrOvfl\n" "Ctxt2EgrOvfl\n" "Ctxt3EgrOvfl\n" "Ctxt4EgrOvfl\n" "Ctxt5EgrOvfl\n" "Ctxt6EgrOvfl\n" "Ctxt7EgrOvfl\n" "Ctxt8EgrOvfl\n" "Ctxt9EgrOvfl\n" "Ctx10EgrOvfl\n" "Ctx11EgrOvfl\n" "Ctx12EgrOvfl\n" "Ctx13EgrOvfl\n" "Ctx14EgrOvfl\n" "Ctx15EgrOvfl\n" "Ctx16EgrOvfl\n" "Ctx17EgrOvfl\n" ; static const u32 cntr7322indices[] = { cr_lbint | _PORT_64BIT_FLAG, cr_lbstall | _PORT_64BIT_FLAG, cr_tidfull, cr_tidinvalid, cr_rxtidflowdrop, cr_base_egrovfl + 0, cr_base_egrovfl + 1, cr_base_egrovfl + 2, cr_base_egrovfl + 3, cr_base_egrovfl + 4, cr_base_egrovfl + 5, cr_base_egrovfl + 6, cr_base_egrovfl + 7, cr_base_egrovfl + 8, cr_base_egrovfl + 9, cr_base_egrovfl + 10, cr_base_egrovfl + 11, cr_base_egrovfl + 12, cr_base_egrovfl + 13, cr_base_egrovfl + 14, cr_base_egrovfl + 15, cr_base_egrovfl + 16, cr_base_egrovfl + 17, }; /* * same as cntr7322names and cntr7322indices, but for port-specific counters. * portcntr7322indices is somewhat complicated by some registers needing * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG */ static const char portcntr7322names[] = "TxPkt\n" "TxFlowPkt\n" "TxWords\n" "RxPkt\n" "RxFlowPkt\n" "RxWords\n" "TxFlowStall\n" "TxDmaDesc\n" /* 7220 and 7322-only */ "E RxDlidFltr\n" /* 7220 and 7322-only */ "IBStatusChng\n" "IBLinkDown\n" "IBLnkRecov\n" "IBRxLinkErr\n" "IBSymbolErr\n" "RxLLIErr\n" "RxBadFormat\n" "RxBadLen\n" "RxBufOvrfl\n" "RxEBP\n" "RxFlowCtlErr\n" "RxICRCerr\n" "RxLPCRCerr\n" "RxVCRCerr\n" "RxInvalLen\n" "RxInvalPKey\n" "RxPktDropped\n" "TxBadLength\n" "TxDropped\n" "TxInvalLen\n" "TxUnderrun\n" "TxUnsupVL\n" "RxLclPhyErr\n" /* 7220 and 7322-only from here down */ "RxVL15Drop\n" "RxVlErr\n" "XcessBufOvfl\n" "RxQPBadCtxt\n" /* 7322-only from here down */ "TXBadHeader\n" ; static const u32 portcntr7322indices[] = { QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, crp_pktsendflow, QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, crp_pktrcvflowctrl, QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, crp_txsdmadesc | _PORT_64BIT_FLAG, crp_rxdlidfltr, crp_ibstatuschange, QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, crp_rcvflowctrlviol, QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, crp_txminmaxlenerr, crp_txdroppedpkt, crp_txlenerr, crp_txunderrun, crp_txunsupvl, QIBPORTCNTR_RXLOCALPHYERR | _PORT_VIRT_FLAG, QIBPORTCNTR_VL15PKTDROP | _PORT_VIRT_FLAG, QIBPORTCNTR_RXVLERR | _PORT_VIRT_FLAG, QIBPORTCNTR_EXCESSBUFOVFL | _PORT_VIRT_FLAG, crp_rxqpinvalidctxt, crp_txhdrerr, }; /* do all the setup to make the counter reads efficient later */ static void init_7322_cntrnames(struct qib_devdata *dd) { int i, j = 0; char *s; for (i = 0, s = (char *)cntr7322names; s && j <= dd->cfgctxts; i++) { /* we always have at least one counter before the egrovfl */ if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) j = 1; s = strchr(s + 1, '\n'); if (s && j) j++; } dd->cspec->ncntrs = i; if (!s) /* full list; size is without terminating null */ dd->cspec->cntrnamelen = sizeof(cntr7322names) - 1; else dd->cspec->cntrnamelen = 1 + s - cntr7322names; dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs * sizeof(u64), GFP_KERNEL); for (i = 0, s = (char *)portcntr7322names; s; i++) s = strchr(s + 1, '\n'); dd->cspec->nportcntrs = i - 1; dd->cspec->portcntrnamelen = sizeof(portcntr7322names) - 1; for (i = 0; i < dd->num_pports; ++i) { dd->pport[i].cpspec->portcntrs = kmalloc(dd->cspec->nportcntrs * sizeof(u64), GFP_KERNEL); } } static u32 qib_read_7322cntrs(struct qib_devdata *dd, loff_t pos, char **namep, u64 **cntrp) { u32 ret; if (namep) { ret = dd->cspec->cntrnamelen; if (pos >= ret) ret = 0; /* final read after getting everything */ else *namep = (char *) cntr7322names; } else { u64 *cntr = dd->cspec->cntrs; int i; ret = dd->cspec->ncntrs * sizeof(u64); if (!cntr || pos >= ret) { /* everything read, or couldn't get memory */ ret = 0; goto done; } *cntrp = cntr; for (i = 0; i < dd->cspec->ncntrs; i++) if (cntr7322indices[i] & _PORT_64BIT_FLAG) *cntr++ = read_7322_creg(dd, cntr7322indices[i] & _PORT_CNTR_IDXMASK); else *cntr++ = read_7322_creg32(dd, cntr7322indices[i]); } done: return ret; } static u32 qib_read_7322portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, char **namep, u64 **cntrp) { u32 ret; if (namep) { ret = dd->cspec->portcntrnamelen; if (pos >= ret) ret = 0; /* final read after getting everything */ else *namep = (char *)portcntr7322names; } else { struct qib_pportdata *ppd = &dd->pport[port]; u64 *cntr = ppd->cpspec->portcntrs; int i; ret = dd->cspec->nportcntrs * sizeof(u64); if (!cntr || pos >= ret) { /* everything read, or couldn't get memory */ ret = 0; goto done; } *cntrp = cntr; for (i = 0; i < dd->cspec->nportcntrs; i++) { if (portcntr7322indices[i] & _PORT_VIRT_FLAG) *cntr++ = qib_portcntr_7322(ppd, portcntr7322indices[i] & _PORT_CNTR_IDXMASK); else if (portcntr7322indices[i] & _PORT_64BIT_FLAG) *cntr++ = read_7322_creg_port(ppd, portcntr7322indices[i] & _PORT_CNTR_IDXMASK); else *cntr++ = read_7322_creg32_port(ppd, portcntr7322indices[i]); } } done: return ret; } /** * qib_get_7322_faststats - get word counters from chip before they overflow * @opaque - contains a pointer to the qlogic_ib device qib_devdata * * VESTIGIAL IBA7322 has no "small fast counters", so the only * real purpose of this function is to maintain the notion of * "active time", which in turn is only logged into the eeprom, * which we don;t have, yet, for 7322-based boards. * * called from add_timer */ static void qib_get_7322_faststats(struct timer_list *t) { struct qib_devdata *dd = from_timer(dd, t, stats_timer); struct qib_pportdata *ppd; unsigned long flags; u64 traffic_wds; int pidx; for (pidx = 0; pidx < dd->num_pports; ++pidx) { ppd = dd->pport + pidx; /* * If port isn't enabled or not operational ports, or * diags is running (can cause memory diags to fail) * skip this port this time. */ if (!ppd->link_speed_supported || !(dd->flags & QIB_INITTED) || dd->diag_client) continue; /* * Maintain an activity timer, based on traffic * exceeding a threshold, so we need to check the word-counts * even if they are 64-bit. */ traffic_wds = qib_portcntr_7322(ppd, QIBPORTCNTR_WORDRCV) + qib_portcntr_7322(ppd, QIBPORTCNTR_WORDSEND); spin_lock_irqsave(&ppd->dd->eep_st_lock, flags); traffic_wds -= ppd->dd->traffic_wds; ppd->dd->traffic_wds += traffic_wds; spin_unlock_irqrestore(&ppd->dd->eep_st_lock, flags); if (ppd->cpspec->qdr_dfe_on && (ppd->link_speed_active & QIB_IB_QDR) && (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) && ppd->cpspec->qdr_dfe_time && time_is_before_jiffies(ppd->cpspec->qdr_dfe_time)) { ppd->cpspec->qdr_dfe_on = 0; qib_write_kreg_port(ppd, krp_static_adapt_dis(2), ppd->dd->cspec->r1 ? QDR_STATIC_ADAPT_INIT_R1 : QDR_STATIC_ADAPT_INIT); force_h1(ppd); } } mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); } /* * If we were using MSIx, try to fallback to INTx. */ static int qib_7322_intr_fallback(struct qib_devdata *dd) { if (!dd->cspec->num_msix_entries) return 0; /* already using INTx */ qib_devinfo(dd->pcidev, "MSIx interrupt not detected, trying INTx interrupts\n"); qib_7322_nomsix(dd); qib_enable_intx(dd); qib_setup_7322_interrupt(dd, 0); return 1; } /* * Reset the XGXS (between serdes and IBC). Slightly less intrusive * than resetting the IBC or external link state, and useful in some * cases to cause some retraining. To do this right, we reset IBC * as well, then return to previous state (which may be still in reset) * NOTE: some callers of this "know" this writes the current value * of cpspec->ibcctrl_a as part of it's operation, so if that changes, * check all callers. */ static void qib_7322_mini_pcs_reset(struct qib_pportdata *ppd) { u64 val; struct qib_devdata *dd = ppd->dd; const u64 reset_bits = SYM_MASK(IBPCSConfig_0, xcv_rreset) | SYM_MASK(IBPCSConfig_0, xcv_treset) | SYM_MASK(IBPCSConfig_0, tx_rx_reset); val = qib_read_kreg_port(ppd, krp_ib_pcsconfig); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask & ~HWE_MASK(statusValidNoEop)); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a & ~SYM_MASK(IBCCtrlA_0, IBLinkEn)); qib_write_kreg_port(ppd, krp_ib_pcsconfig, val | reset_bits); qib_read_kreg32(dd, kr_scratch); qib_write_kreg_port(ppd, krp_ib_pcsconfig, val & ~reset_bits); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_write_kreg(dd, kr_scratch, 0ULL); qib_write_kreg(dd, kr_hwerrclear, SYM_MASK(HwErrClear, statusValidNoEopClear)); qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); } /* * This code for non-IBTA-compliant IB speed negotiation is only known to * work for the SDR to DDR transition, and only between an HCA and a switch * with recent firmware. It is based on observed heuristics, rather than * actual knowledge of the non-compliant speed negotiation. * It has a number of hard-coded fields, since the hope is to rewrite this * when a spec is available on how the negoation is intended to work. */ static void autoneg_7322_sendpkt(struct qib_pportdata *ppd, u32 *hdr, u32 dcnt, u32 *data) { int i; u64 pbc; u32 __iomem *piobuf; u32 pnum, control, len; struct qib_devdata *dd = ppd->dd; i = 0; len = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */ control = qib_7322_setpbc_control(ppd, len, 0, 15); pbc = ((u64) control << 32) | len; while (!(piobuf = qib_7322_getsendbuf(ppd, pbc, &pnum))) { if (i++ > 15) return; udelay(2); } /* disable header check on this packet, since it can't be valid */ dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_DIS1, NULL); writeq(pbc, piobuf); qib_flush_wc(); qib_pio_copy(piobuf + 2, hdr, 7); qib_pio_copy(piobuf + 9, data, dcnt); if (dd->flags & QIB_USE_SPCL_TRIG) { u32 spcl_off = (pnum >= dd->piobcnt2k) ? 2047 : 1023; qib_flush_wc(); __raw_writel(0xaebecede, piobuf + spcl_off); } qib_flush_wc(); qib_sendbuf_done(dd, pnum); /* and re-enable hdr check */ dd->f_txchk_change(dd, pnum, 1, TXCHK_CHG_TYPE_ENAB1, NULL); } /* * _start packet gets sent twice at start, _done gets sent twice at end */ static void qib_autoneg_7322_send(struct qib_pportdata *ppd, int which) { struct qib_devdata *dd = ppd->dd; static u32 swapped; u32 dw, i, hcnt, dcnt, *data; static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba }; static u32 madpayload_start[0x40] = { 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */ }; static u32 madpayload_done[0x40] = { 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0, 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40000001, 0x1388, 0x15e, /* rest 0's */ }; dcnt = ARRAY_SIZE(madpayload_start); hcnt = ARRAY_SIZE(hdr); if (!swapped) { /* for maintainability, do it at runtime */ for (i = 0; i < hcnt; i++) { dw = (__force u32) cpu_to_be32(hdr[i]); hdr[i] = dw; } for (i = 0; i < dcnt; i++) { dw = (__force u32) cpu_to_be32(madpayload_start[i]); madpayload_start[i] = dw; dw = (__force u32) cpu_to_be32(madpayload_done[i]); madpayload_done[i] = dw; } swapped = 1; } data = which ? madpayload_done : madpayload_start; autoneg_7322_sendpkt(ppd, hdr, dcnt, data); qib_read_kreg64(dd, kr_scratch); udelay(2); autoneg_7322_sendpkt(ppd, hdr, dcnt, data); qib_read_kreg64(dd, kr_scratch); udelay(2); } /* * Do the absolute minimum to cause an IB speed change, and make it * ready, but don't actually trigger the change. The caller will * do that when ready (if link is in Polling training state, it will * happen immediately, otherwise when link next goes down) * * This routine should only be used as part of the DDR autonegotation * code for devices that are not compliant with IB 1.2 (or code that * fixes things up for same). * * When link has gone down, and autoneg enabled, or autoneg has * failed and we give up until next time we set both speeds, and * then we want IBTA enabled as well as "use max enabled speed. */ static void set_7322_ibspeed_fast(struct qib_pportdata *ppd, u32 speed) { u64 newctrlb; newctrlb = ppd->cpspec->ibcctrl_b & ~(IBA7322_IBC_SPEED_MASK | IBA7322_IBC_IBTA_1_2_MASK | IBA7322_IBC_MAX_SPEED_MASK); if (speed & (speed - 1)) /* multiple speeds */ newctrlb |= (speed << IBA7322_IBC_SPEED_LSB) | IBA7322_IBC_IBTA_1_2_MASK | IBA7322_IBC_MAX_SPEED_MASK; else newctrlb |= speed == QIB_IB_QDR ? IBA7322_IBC_SPEED_QDR | IBA7322_IBC_IBTA_1_2_MASK : ((speed == QIB_IB_DDR ? IBA7322_IBC_SPEED_DDR : IBA7322_IBC_SPEED_SDR)); if (newctrlb == ppd->cpspec->ibcctrl_b) return; ppd->cpspec->ibcctrl_b = newctrlb; qib_write_kreg_port(ppd, krp_ibcctrl_b, ppd->cpspec->ibcctrl_b); qib_write_kreg(ppd->dd, kr_scratch, 0); } /* * This routine is only used when we are not talking to another * IB 1.2-compliant device that we think can do DDR. * (This includes all existing switch chips as of Oct 2007.) * 1.2-compliant devices go directly to DDR prior to reaching INIT */ static void try_7322_autoneg(struct qib_pportdata *ppd) { unsigned long flags; spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags |= QIBL_IB_AUTONEG_INPROG; spin_unlock_irqrestore(&ppd->lflags_lock, flags); qib_autoneg_7322_send(ppd, 0); set_7322_ibspeed_fast(ppd, QIB_IB_DDR); qib_7322_mini_pcs_reset(ppd); /* 2 msec is minimum length of a poll cycle */ queue_delayed_work(ib_wq, &ppd->cpspec->autoneg_work, msecs_to_jiffies(2)); } /* * Handle the empirically determined mechanism for auto-negotiation * of DDR speed with switches. */ static void autoneg_7322_work(struct work_struct *work) { struct qib_pportdata *ppd; struct qib_devdata *dd; u64 startms; u32 i; unsigned long flags; ppd = container_of(work, struct qib_chippport_specific, autoneg_work.work)->ppd; dd = ppd->dd; startms = jiffies_to_msecs(jiffies); /* * Busy wait for this first part, it should be at most a * few hundred usec, since we scheduled ourselves for 2msec. */ for (i = 0; i < 25; i++) { if (SYM_FIELD(ppd->lastibcstat, IBCStatusA_0, LinkState) == IB_7322_LT_STATE_POLLQUIET) { qib_set_linkstate(ppd, QIB_IB_LINKDOWN_DISABLE); break; } udelay(100); } if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) goto done; /* we got there early or told to stop */ /* we expect this to timeout */ if (wait_event_timeout(ppd->cpspec->autoneg_wait, !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), msecs_to_jiffies(90))) goto done; qib_7322_mini_pcs_reset(ppd); /* we expect this to timeout */ if (wait_event_timeout(ppd->cpspec->autoneg_wait, !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), msecs_to_jiffies(1700))) goto done; qib_7322_mini_pcs_reset(ppd); set_7322_ibspeed_fast(ppd, QIB_IB_SDR); /* * Wait up to 250 msec for link to train and get to INIT at DDR; * this should terminate early. */ wait_event_timeout(ppd->cpspec->autoneg_wait, !(ppd->lflags & QIBL_IB_AUTONEG_INPROG), msecs_to_jiffies(250)); done: if (ppd->lflags & QIBL_IB_AUTONEG_INPROG) { spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_AUTONEG_INPROG; if (ppd->cpspec->autoneg_tries == AUTONEG_TRIES) { ppd->lflags |= QIBL_IB_AUTONEG_FAILED; ppd->cpspec->autoneg_tries = 0; } spin_unlock_irqrestore(&ppd->lflags_lock, flags); set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); } } /* * This routine is used to request IPG set in the QLogic switch. * Only called if r1. */ static void try_7322_ipg(struct qib_pportdata *ppd) { struct qib_ibport *ibp = &ppd->ibport_data; struct ib_mad_send_buf *send_buf; struct ib_mad_agent *agent; struct ib_smp *smp; unsigned delay; int ret; agent = ibp->rvp.send_agent; if (!agent) goto retry; send_buf = ib_create_send_mad(agent, 0, 0, 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, GFP_ATOMIC, IB_MGMT_BASE_VERSION); if (IS_ERR(send_buf)) goto retry; if (!ibp->smi_ah) { struct ib_ah *ah; ah = qib_create_qp0_ah(ibp, be16_to_cpu(IB_LID_PERMISSIVE)); if (IS_ERR(ah)) ret = PTR_ERR(ah); else { send_buf->ah = ah; ibp->smi_ah = ibah_to_rvtah(ah); ret = 0; } } else { send_buf->ah = &ibp->smi_ah->ibah; ret = 0; } smp = send_buf->mad; smp->base_version = IB_MGMT_BASE_VERSION; smp->mgmt_class = IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE; smp->class_version = 1; smp->method = IB_MGMT_METHOD_SEND; smp->hop_cnt = 1; smp->attr_id = QIB_VENDOR_IPG; smp->attr_mod = 0; if (!ret) ret = ib_post_send_mad(send_buf, NULL); if (ret) ib_free_send_mad(send_buf); retry: delay = 2 << ppd->cpspec->ipg_tries; queue_delayed_work(ib_wq, &ppd->cpspec->ipg_work, msecs_to_jiffies(delay)); } /* * Timeout handler for setting IPG. * Only called if r1. */ static void ipg_7322_work(struct work_struct *work) { struct qib_pportdata *ppd; ppd = container_of(work, struct qib_chippport_specific, ipg_work.work)->ppd; if ((ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) && ++ppd->cpspec->ipg_tries <= 10) try_7322_ipg(ppd); } static u32 qib_7322_iblink_state(u64 ibcs) { u32 state = (u32)SYM_FIELD(ibcs, IBCStatusA_0, LinkState); switch (state) { case IB_7322_L_STATE_INIT: state = IB_PORT_INIT; break; case IB_7322_L_STATE_ARM: state = IB_PORT_ARMED; break; case IB_7322_L_STATE_ACTIVE: /* fall through */ case IB_7322_L_STATE_ACT_DEFER: state = IB_PORT_ACTIVE; break; default: /* fall through */ case IB_7322_L_STATE_DOWN: state = IB_PORT_DOWN; break; } return state; } /* returns the IBTA port state, rather than the IBC link training state */ static u8 qib_7322_phys_portstate(u64 ibcs) { u8 state = (u8)SYM_FIELD(ibcs, IBCStatusA_0, LinkTrainingState); return qib_7322_physportstate[state]; } static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) { int ret = 0, symadj = 0; unsigned long flags; int mult; spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; spin_unlock_irqrestore(&ppd->lflags_lock, flags); /* Update our picture of width and speed from chip */ if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedQDR)) { ppd->link_speed_active = QIB_IB_QDR; mult = 4; } else if (ibcs & SYM_MASK(IBCStatusA_0, LinkSpeedActive)) { ppd->link_speed_active = QIB_IB_DDR; mult = 2; } else { ppd->link_speed_active = QIB_IB_SDR; mult = 1; } if (ibcs & SYM_MASK(IBCStatusA_0, LinkWidthActive)) { ppd->link_width_active = IB_WIDTH_4X; mult *= 4; } else ppd->link_width_active = IB_WIDTH_1X; ppd->delay_mult = ib_rate_to_delay[mult_to_ib_rate(mult)]; if (!ibup) { u64 clr; /* Link went down. */ /* do IPG MAD again after linkdown, even if last time failed */ ppd->cpspec->ipg_tries = 0; clr = qib_read_kreg_port(ppd, krp_ibcstatus_b) & (SYM_MASK(IBCStatusB_0, heartbeat_timed_out) | SYM_MASK(IBCStatusB_0, heartbeat_crosstalk)); if (clr) qib_write_kreg_port(ppd, krp_ibcstatus_b, clr); if (!(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | QIBL_IB_AUTONEG_INPROG))) set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; /* unlock the Tx settings, speed may change */ qib_write_kreg_port(ppd, krp_tx_deemph_override, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, reset_tx_deemphasis_override)); qib_cancel_sends(ppd); /* on link down, ensure sane pcs state */ qib_7322_mini_pcs_reset(ppd); /* schedule the qsfp refresh which should turn the link off */ if (ppd->dd->flags & QIB_HAS_QSFP) { qd->t_insert = jiffies; queue_work(ib_wq, &qd->work); } spin_lock_irqsave(&ppd->sdma_lock, flags); if (__qib_sdma_running(ppd)) __qib_sdma_process_event(ppd, qib_sdma_event_e70_go_idle); spin_unlock_irqrestore(&ppd->sdma_lock, flags); } clr = read_7322_creg32_port(ppd, crp_iblinkdown); if (clr == ppd->cpspec->iblnkdownsnap) ppd->cpspec->iblnkdowndelta++; } else { if (qib_compat_ddr_negotiate && !(ppd->lflags & (QIBL_IB_AUTONEG_FAILED | QIBL_IB_AUTONEG_INPROG)) && ppd->link_speed_active == QIB_IB_SDR && (ppd->link_speed_enabled & QIB_IB_DDR) && ppd->cpspec->autoneg_tries < AUTONEG_TRIES) { /* we are SDR, and auto-negotiation enabled */ ++ppd->cpspec->autoneg_tries; if (!ppd->cpspec->ibdeltainprog) { ppd->cpspec->ibdeltainprog = 1; ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; } try_7322_autoneg(ppd); ret = 1; /* no other IB status change processing */ } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && ppd->link_speed_active == QIB_IB_SDR) { qib_autoneg_7322_send(ppd, 1); set_7322_ibspeed_fast(ppd, QIB_IB_DDR); qib_7322_mini_pcs_reset(ppd); udelay(2); ret = 1; /* no other IB status change processing */ } else if ((ppd->lflags & QIBL_IB_AUTONEG_INPROG) && (ppd->link_speed_active & QIB_IB_DDR)) { spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~(QIBL_IB_AUTONEG_INPROG | QIBL_IB_AUTONEG_FAILED); spin_unlock_irqrestore(&ppd->lflags_lock, flags); ppd->cpspec->autoneg_tries = 0; /* re-enable SDR, for next link down */ set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); wake_up(&ppd->cpspec->autoneg_wait); symadj = 1; } else if (ppd->lflags & QIBL_IB_AUTONEG_FAILED) { /* * Clear autoneg failure flag, and do setup * so we'll try next time link goes down and * back to INIT (possibly connected to a * different device). */ spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_IB_AUTONEG_FAILED; spin_unlock_irqrestore(&ppd->lflags_lock, flags); ppd->cpspec->ibcctrl_b |= IBA7322_IBC_IBTA_1_2_MASK; symadj = 1; } if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { symadj = 1; if (ppd->dd->cspec->r1 && ppd->cpspec->ipg_tries <= 10) try_7322_ipg(ppd); if (!ppd->cpspec->recovery_init) setup_7322_link_recovery(ppd, 0); ppd->cpspec->qdr_dfe_time = jiffies + msecs_to_jiffies(QDR_DFE_DISABLE_DELAY); } ppd->cpspec->ibmalfusesnap = 0; ppd->cpspec->ibmalfsnap = read_7322_creg32_port(ppd, crp_errlink); } if (symadj) { ppd->cpspec->iblnkdownsnap = read_7322_creg32_port(ppd, crp_iblinkdown); if (ppd->cpspec->ibdeltainprog) { ppd->cpspec->ibdeltainprog = 0; ppd->cpspec->ibsymdelta += read_7322_creg32_port(ppd, crp_ibsymbolerr) - ppd->cpspec->ibsymsnap; ppd->cpspec->iblnkerrdelta += read_7322_creg32_port(ppd, crp_iblinkerrrecov) - ppd->cpspec->iblnkerrsnap; } } else if (!ibup && qib_compat_ddr_negotiate && !ppd->cpspec->ibdeltainprog && !(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { ppd->cpspec->ibdeltainprog = 1; ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd, crp_ibsymbolerr); ppd->cpspec->iblnkerrsnap = read_7322_creg32_port(ppd, crp_iblinkerrrecov); } if (!ret) qib_setup_7322_setextled(ppd, ibup); return ret; } /* * Does read/modify/write to appropriate registers to * set output and direction bits selected by mask. * these are in their canonical postions (e.g. lsb of * dir will end up in D48 of extctrl on existing chips). * returns contents of GP Inputs. */ static int gpio_7322_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) { u64 read_val, new_out; unsigned long flags; if (mask) { /* some bits being written, lock access to GPIO */ dir &= mask; out &= mask; spin_lock_irqsave(&dd->cspec->gpio_lock, flags); dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); new_out = (dd->cspec->gpio_out & ~mask) | out; qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); qib_write_kreg(dd, kr_gpio_out, new_out); dd->cspec->gpio_out = new_out; spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); } /* * It is unlikely that a read at this time would get valid * data on a pin whose direction line was set in the same * call to this function. We include the read here because * that allows us to potentially combine a change on one pin with * a read on another, and because the old code did something like * this. */ read_val = qib_read_kreg64(dd, kr_extstatus); return SYM_FIELD(read_val, EXTStatus, GPIOIn); } /* Enable writes to config EEPROM, if possible. Returns previous state */ static int qib_7322_eeprom_wen(struct qib_devdata *dd, int wen) { int prev_wen; u32 mask; mask = 1 << QIB_EEPROM_WEN_NUM; prev_wen = ~gpio_7322_mod(dd, 0, 0, 0) >> QIB_EEPROM_WEN_NUM; gpio_7322_mod(dd, wen ? 0 : mask, mask, mask); return prev_wen & 1; } /* * Read fundamental info we need to use the chip. These are * the registers that describe chip capabilities, and are * saved in shadow registers. */ static void get_7322_chip_params(struct qib_devdata *dd) { u64 val; u32 piobufs; int mtu; dd->palign = qib_read_kreg32(dd, kr_pagealign); dd->uregbase = qib_read_kreg32(dd, kr_userregbase); dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; val = qib_read_kreg64(dd, kr_sendpiobufcnt); dd->piobcnt2k = val & ~0U; dd->piobcnt4k = val >> 32; val = qib_read_kreg64(dd, kr_sendpiosize); dd->piosize2k = val & ~0U; dd->piosize4k = val >> 32; mtu = ib_mtu_enum_to_int(qib_ibmtu); if (mtu == -1) mtu = QIB_DEFAULT_MTU; dd->pport[0].ibmtu = (u32)mtu; dd->pport[1].ibmtu = (u32)mtu; /* these may be adjusted in init_chip_wc_pat() */ dd->pio2kbase = (u32 __iomem *) ((char __iomem *) dd->kregbase + dd->pio2k_bufbase); dd->pio4kbase = (u32 __iomem *) ((char __iomem *) dd->kregbase + (dd->piobufbase >> 32)); /* * 4K buffers take 2 pages; we use roundup just to be * paranoid; we calculate it once here, rather than on * ever buf allocate */ dd->align4k = ALIGN(dd->piosize4k, dd->palign); piobufs = dd->piobcnt4k + dd->piobcnt2k + NUM_VL15_BUFS; dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / (sizeof(u64) * BITS_PER_BYTE / 2); } /* * The chip base addresses in cspec and cpspec have to be set * after possible init_chip_wc_pat(), rather than in * get_7322_chip_params(), so split out as separate function */ static void qib_7322_set_baseaddrs(struct qib_devdata *dd) { u32 cregbase; cregbase = qib_read_kreg32(dd, kr_counterregbase); dd->cspec->cregbase = (u64 __iomem *)(cregbase + (char __iomem *)dd->kregbase); dd->egrtidbase = (u64 __iomem *) ((char __iomem *) dd->kregbase + dd->rcvegrbase); /* port registers are defined as relative to base of chip */ dd->pport[0].cpspec->kpregbase = (u64 __iomem *)((char __iomem *)dd->kregbase); dd->pport[1].cpspec->kpregbase = (u64 __iomem *)(dd->palign + (char __iomem *)dd->kregbase); dd->pport[0].cpspec->cpregbase = (u64 __iomem *)(qib_read_kreg_port(&dd->pport[0], kr_counterregbase) + (char __iomem *)dd->kregbase); dd->pport[1].cpspec->cpregbase = (u64 __iomem *)(qib_read_kreg_port(&dd->pport[1], kr_counterregbase) + (char __iomem *)dd->kregbase); } /* * This is a fairly special-purpose observer, so we only support * the port-specific parts of SendCtrl */ #define SENDCTRL_SHADOWED (SYM_MASK(SendCtrl_0, SendEnable) | \ SYM_MASK(SendCtrl_0, SDmaEnable) | \ SYM_MASK(SendCtrl_0, SDmaIntEnable) | \ SYM_MASK(SendCtrl_0, SDmaSingleDescriptor) | \ SYM_MASK(SendCtrl_0, SDmaHalt) | \ SYM_MASK(SendCtrl_0, IBVLArbiterEn) | \ SYM_MASK(SendCtrl_0, ForceCreditUpToDate)) static int sendctrl_hook(struct qib_devdata *dd, const struct diag_observer *op, u32 offs, u64 *data, u64 mask, int only_32) { unsigned long flags; unsigned idx; unsigned pidx; struct qib_pportdata *ppd = NULL; u64 local_data, all_bits; /* * The fixed correspondence between Physical ports and pports is * severed. We need to hunt for the ppd that corresponds * to the offset we got. And we have to do that without admitting * we know the stride, apparently. */ for (pidx = 0; pidx < dd->num_pports; ++pidx) { u64 __iomem *psptr; u32 psoffs; ppd = dd->pport + pidx; if (!ppd->cpspec->kpregbase) continue; psptr = ppd->cpspec->kpregbase + krp_sendctrl; psoffs = (u32) (psptr - dd->kregbase) * sizeof(*psptr); if (psoffs == offs) break; } /* If pport is not being managed by driver, just avoid shadows. */ if (pidx >= dd->num_pports) ppd = NULL; /* In any case, "idx" is flat index in kreg space */ idx = offs / sizeof(u64); all_bits = ~0ULL; if (only_32) all_bits >>= 32; spin_lock_irqsave(&dd->sendctrl_lock, flags); if (!ppd || (mask & all_bits) != all_bits) { /* * At least some mask bits are zero, so we need * to read. The judgement call is whether from * reg or shadow. First-cut: read reg, and complain * if any bits which should be shadowed are different * from their shadowed value. */ if (only_32) local_data = (u64)qib_read_kreg32(dd, idx); else local_data = qib_read_kreg64(dd, idx); *data = (local_data & ~mask) | (*data & mask); } if (mask) { /* * At least some mask bits are one, so we need * to write, but only shadow some bits. */ u64 sval, tval; /* Shadowed, transient */ /* * New shadow val is bits we don't want to touch, * ORed with bits we do, that are intended for shadow. */ if (ppd) { sval = ppd->p_sendctrl & ~mask; sval |= *data & SENDCTRL_SHADOWED & mask; ppd->p_sendctrl = sval; } else sval = *data & SENDCTRL_SHADOWED & mask; tval = sval | (*data & ~SENDCTRL_SHADOWED & mask); qib_write_kreg(dd, idx, tval); qib_write_kreg(dd, kr_scratch, 0Ull); } spin_unlock_irqrestore(&dd->sendctrl_lock, flags); return only_32 ? 4 : 8; } static const struct diag_observer sendctrl_0_observer = { sendctrl_hook, KREG_IDX(SendCtrl_0) * sizeof(u64), KREG_IDX(SendCtrl_0) * sizeof(u64) }; static const struct diag_observer sendctrl_1_observer = { sendctrl_hook, KREG_IDX(SendCtrl_1) * sizeof(u64), KREG_IDX(SendCtrl_1) * sizeof(u64) }; static ushort sdma_fetch_prio = 8; module_param_named(sdma_fetch_prio, sdma_fetch_prio, ushort, S_IRUGO); MODULE_PARM_DESC(sdma_fetch_prio, "SDMA descriptor fetch priority"); /* Besides logging QSFP events, we set appropriate TxDDS values */ static void init_txdds_table(struct qib_pportdata *ppd, int override); static void qsfp_7322_event(struct work_struct *work) { struct qib_qsfp_data *qd; struct qib_pportdata *ppd; unsigned long pwrup; unsigned long flags; int ret; u32 le2; qd = container_of(work, struct qib_qsfp_data, work); ppd = qd->ppd; pwrup = qd->t_insert + msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); /* Delay for 20 msecs to allow ModPrs resistor to setup */ mdelay(QSFP_MODPRS_LAG_MSEC); if (!qib_qsfp_mod_present(ppd)) { ppd->cpspec->qsfp_data.modpresent = 0; /* Set the physical link to disabled */ qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags &= ~QIBL_LINKV; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } else { /* * Some QSFP's not only do not respond until the full power-up * time, but may behave badly if we try. So hold off responding * to insertion. */ while (1) { if (time_is_before_jiffies(pwrup)) break; msleep(20); } ret = qib_refresh_qsfp_cache(ppd, &qd->cache); /* * Need to change LE2 back to defaults if we couldn't * read the cable type (to handle cable swaps), so do this * even on failure to read cable information. We don't * get here for QME, so IS_QME check not needed here. */ if (!ret && !ppd->dd->cspec->r1) { if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) le2 = LE2_QME; else if (qd->cache.atten[1] >= qib_long_atten && QSFP_IS_CU(qd->cache.tech)) le2 = LE2_5m; else le2 = LE2_DEFAULT; } else le2 = LE2_DEFAULT; ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); /* * We always change parameteters, since we can choose * values for cables without eeproms, and the cable may have * changed from a cable with full or partial eeprom content * to one with partial or no content. */ init_txdds_table(ppd, 0); /* The physical link is being re-enabled only when the * previous state was DISABLED and the VALID bit is not * set. This should only happen when the cable has been * physically pulled. */ if (!ppd->cpspec->qsfp_data.modpresent && (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { ppd->cpspec->qsfp_data.modpresent = 1; qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); spin_lock_irqsave(&ppd->lflags_lock, flags); ppd->lflags |= QIBL_LINKV; spin_unlock_irqrestore(&ppd->lflags_lock, flags); } } } /* * There is little we can do but complain to the user if QSFP * initialization fails. */ static void qib_init_7322_qsfp(struct qib_pportdata *ppd) { unsigned long flags; struct qib_qsfp_data *qd = &ppd->cpspec->qsfp_data; struct qib_devdata *dd = ppd->dd; u64 mod_prs_bit = QSFP_GPIO_MOD_PRS_N; mod_prs_bit <<= (QSFP_GPIO_PORT2_SHIFT * ppd->hw_pidx); qd->ppd = ppd; qib_qsfp_init(qd, qsfp_7322_event); spin_lock_irqsave(&dd->cspec->gpio_lock, flags); dd->cspec->extctrl |= (mod_prs_bit << SYM_LSB(EXTCtrl, GPIOInvert)); dd->cspec->gpio_mask |= mod_prs_bit; qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); } /* * called at device initialization time, and also if the txselect * module parameter is changed. This is used for cables that don't * have valid QSFP EEPROMs (not present, or attenuation is zero). * We initialize to the default, then if there is a specific * unit,port match, we use that (and set it immediately, for the * current speed, if the link is at INIT or better). * String format is "default# unit#,port#=# ... u,p=#", separators must * be a SPACE character. A newline terminates. The u,p=# tuples may * optionally have "u,p=#,#", where the final # is the H1 value * The last specific match is used (actually, all are used, but last * one is the one that winds up set); if none at all, fall back on default. */ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) { char *nxt, *str; u32 pidx, unit, port, deflt, h1; unsigned long val; int any = 0, seth1; int txdds_size; str = txselect_list; /* default number is validated in setup_txselect() */ deflt = simple_strtoul(str, &nxt, 0); for (pidx = 0; pidx < dd->num_pports; ++pidx) dd->pport[pidx].cpspec->no_eep = deflt; txdds_size = TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ; if (IS_QME(dd) || IS_QMH(dd)) txdds_size += TXDDS_MFG_SZ; while (*nxt && nxt[1]) { str = ++nxt; unit = simple_strtoul(str, &nxt, 0); if (nxt == str || !*nxt || *nxt != ',') { while (*nxt && *nxt++ != ' ') /* skip to next, if any */ ; continue; } str = ++nxt; port = simple_strtoul(str, &nxt, 0); if (nxt == str || *nxt != '=') { while (*nxt && *nxt++ != ' ') /* skip to next, if any */ ; continue; } str = ++nxt; val = simple_strtoul(str, &nxt, 0); if (nxt == str) { while (*nxt && *nxt++ != ' ') /* skip to next, if any */ ; continue; } if (val >= txdds_size) continue; seth1 = 0; h1 = 0; /* gcc thinks it might be used uninitted */ if (*nxt == ',' && nxt[1]) { str = ++nxt; h1 = (u32)simple_strtoul(str, &nxt, 0); if (nxt == str) while (*nxt && *nxt++ != ' ') /* skip */ ; else seth1 = 1; } for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; ++pidx) { struct qib_pportdata *ppd = &dd->pport[pidx]; if (ppd->port != port || !ppd->link_speed_supported) continue; ppd->cpspec->no_eep = val; if (seth1) ppd->cpspec->h1_val = h1; /* now change the IBC and serdes, overriding generic */ init_txdds_table(ppd, 1); /* Re-enable the physical state machine on mezz boards * now that the correct settings have been set. * QSFP boards are handles by the QSFP event handler */ if (IS_QMH(dd) || IS_QME(dd)) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); any++; } if (*nxt == '\n') break; /* done */ } if (change && !any) { /* no specific setting, use the default. * Change the IBC and serdes, but since it's * general, don't override specific settings. */ for (pidx = 0; pidx < dd->num_pports; ++pidx) if (dd->pport[pidx].link_speed_supported) init_txdds_table(&dd->pport[pidx], 0); } } /* handle the txselect parameter changing */ static int setup_txselect(const char *str, struct kernel_param *kp) { struct qib_devdata *dd; unsigned long val; char *n; if (strlen(str) >= ARRAY_SIZE(txselect_list)) { pr_info("txselect_values string too long\n"); return -ENOSPC; } val = simple_strtoul(str, &n, 0); if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ)) { pr_info("txselect_values must start with a number < %d\n", TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ); return -EINVAL; } strncpy(txselect_list, str, ARRAY_SIZE(txselect_list) - 1); list_for_each_entry(dd, &qib_dev_list, list) if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) set_no_qsfp_atten(dd, 1); return 0; } /* * Write the final few registers that depend on some of the * init setup. Done late in init, just before bringing up * the serdes. */ static int qib_late_7322_initreg(struct qib_devdata *dd) { int ret = 0, n; u64 val; qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); val = qib_read_kreg64(dd, kr_sendpioavailaddr); if (val != dd->pioavailregs_phys) { qib_dev_err(dd, "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", (unsigned long) dd->pioavailregs_phys, (unsigned long long) val); ret = -EINVAL; } n = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS; qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_KERN, NULL); /* driver sends get pkey, lid, etc. checking also, to catch bugs */ qib_7322_txchk_change(dd, 0, n, TXCHK_CHG_TYPE_ENAB1, NULL); qib_register_observer(dd, &sendctrl_0_observer); qib_register_observer(dd, &sendctrl_1_observer); dd->control &= ~QLOGIC_IB_C_SDMAFETCHPRIOEN; qib_write_kreg(dd, kr_control, dd->control); /* * Set SendDmaFetchPriority and init Tx params, including * QSFP handler on boards that have QSFP. * First set our default attenuation entry for cables that * don't have valid attenuation. */ set_no_qsfp_atten(dd, 0); for (n = 0; n < dd->num_pports; ++n) { struct qib_pportdata *ppd = dd->pport + n; qib_write_kreg_port(ppd, krp_senddmaprioritythld, sdma_fetch_prio & 0xf); /* Initialize qsfp if present on board. */ if (dd->flags & QIB_HAS_QSFP) qib_init_7322_qsfp(ppd); } dd->control |= QLOGIC_IB_C_SDMAFETCHPRIOEN; qib_write_kreg(dd, kr_control, dd->control); return ret; } /* per IB port errors. */ #define SENDCTRL_PIBP (MASK_ACROSS(0, 1) | MASK_ACROSS(3, 3) | \ MASK_ACROSS(8, 15)) #define RCVCTRL_PIBP (MASK_ACROSS(0, 17) | MASK_ACROSS(39, 41)) #define ERRS_PIBP (MASK_ACROSS(57, 58) | MASK_ACROSS(54, 54) | \ MASK_ACROSS(36, 49) | MASK_ACROSS(29, 34) | MASK_ACROSS(14, 17) | \ MASK_ACROSS(0, 11)) /* * Write the initialization per-port registers that need to be done at * driver load and after reset completes (i.e., that aren't done as part * of other init procedures called from qib_init.c). * Some of these should be redundant on reset, but play safe. */ static void write_7322_init_portregs(struct qib_pportdata *ppd) { u64 val; int i; if (!ppd->link_speed_supported) { /* no buffer credits for this port */ for (i = 1; i < 8; i++) qib_write_kreg_port(ppd, krp_rxcreditvl0 + i, 0); qib_write_kreg_port(ppd, krp_ibcctrl_b, 0); qib_write_kreg(ppd->dd, kr_scratch, 0); return; } /* * Set the number of supported virtual lanes in IBC, * for flow control packet handling on unsupported VLs */ val = qib_read_kreg_port(ppd, krp_ibsdtestiftx); val &= ~SYM_MASK(IB_SDTEST_IF_TX_0, VL_CAP); val |= (u64)(ppd->vls_supported - 1) << SYM_LSB(IB_SDTEST_IF_TX_0, VL_CAP); qib_write_kreg_port(ppd, krp_ibsdtestiftx, val); qib_write_kreg_port(ppd, krp_rcvbthqp, QIB_KD_QP); /* enable tx header checking */ qib_write_kreg_port(ppd, krp_sendcheckcontrol, IBA7322_SENDCHK_PKEY | IBA7322_SENDCHK_BTHQP | IBA7322_SENDCHK_SLID | IBA7322_SENDCHK_RAW_IPV6 | IBA7322_SENDCHK_MINSZ); qib_write_kreg_port(ppd, krp_ncmodectrl, SYM_MASK(IBNCModeCtrl_0, ScrambleCapLocal)); /* * Unconditionally clear the bufmask bits. If SDMA is * enabled, we'll set them appropriately later. */ qib_write_kreg_port(ppd, krp_senddmabufmask0, 0); qib_write_kreg_port(ppd, krp_senddmabufmask1, 0); qib_write_kreg_port(ppd, krp_senddmabufmask2, 0); if (ppd->dd->cspec->r1) ppd->p_sendctrl |= SYM_MASK(SendCtrl_0, ForceCreditUpToDate); } /* * Write the initialization per-device registers that need to be done at * driver load and after reset completes (i.e., that aren't done as part * of other init procedures called from qib_init.c). Also write per-port * registers that are affected by overall device config, such as QP mapping * Some of these should be redundant on reset, but play safe. */ static void write_7322_initregs(struct qib_devdata *dd) { struct qib_pportdata *ppd; int i, pidx; u64 val; /* Set Multicast QPs received by port 2 to map to context one. */ qib_write_kreg(dd, KREG_IDX(RcvQPMulticastContext_1), 1); for (pidx = 0; pidx < dd->num_pports; ++pidx) { unsigned n, regno; unsigned long flags; if (dd->n_krcv_queues < 2 || !dd->pport[pidx].link_speed_supported) continue; ppd = &dd->pport[pidx]; /* be paranoid against later code motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvQPMapEnable); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); /* Initialize QP to context mapping */ regno = krp_rcvqpmaptable; val = 0; if (dd->num_pports > 1) n = dd->first_user_ctxt / dd->num_pports; else n = dd->first_user_ctxt - 1; for (i = 0; i < 32; ) { unsigned ctxt; if (dd->num_pports > 1) ctxt = (i % n) * dd->num_pports + pidx; else if (i % n) ctxt = (i % n) + 1; else ctxt = ppd->hw_pidx; val |= ctxt << (5 * (i % 6)); i++; if (i % 6 == 0) { qib_write_kreg_port(ppd, regno, val); val = 0; regno++; } } qib_write_kreg_port(ppd, regno, val); } /* * Setup up interrupt mitigation for kernel contexts, but * not user contexts (user contexts use interrupts when * stalled waiting for any packet, so want those interrupts * right away). */ for (i = 0; i < dd->first_user_ctxt; i++) { dd->cspec->rcvavail_timeout[i] = rcv_int_timeout; qib_write_kreg(dd, kr_rcvavailtimeout + i, rcv_int_timeout); } /* * Initialize as (disabled) rcvflow tables. Application code * will setup each flow as it uses the flow. * Doesn't clear any of the error bits that might be set. */ val = TIDFLOW_ERRBITS; /* these are W1C */ for (i = 0; i < dd->cfgctxts; i++) { int flow; for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++) qib_write_ureg(dd, ur_rcvflowtable+flow, val, i); } /* * dual cards init to dual port recovery, single port cards to * the one port. Dual port cards may later adjust to 1 port, * and then back to dual port if both ports are connected * */ if (dd->num_pports) setup_7322_link_recovery(dd->pport, dd->num_pports > 1); } static int qib_init_7322_variables(struct qib_devdata *dd) { struct qib_pportdata *ppd; unsigned features, pidx, sbufcnt; int ret, mtu; u32 sbufs, updthresh; resource_size_t vl15off; /* pport structs are contiguous, allocated after devdata */ ppd = (struct qib_pportdata *)(dd + 1); dd->pport = ppd; ppd[0].dd = dd; ppd[1].dd = dd; dd->cspec = (struct qib_chip_specific *)(ppd + 2); ppd[0].cpspec = (struct qib_chippport_specific *)(dd->cspec + 1); ppd[1].cpspec = &ppd[0].cpspec[1]; ppd[0].cpspec->ppd = &ppd[0]; /* for autoneg_7322_work() */ ppd[1].cpspec->ppd = &ppd[1]; /* for autoneg_7322_work() */ spin_lock_init(&dd->cspec->rcvmod_lock); spin_lock_init(&dd->cspec->gpio_lock); /* we haven't yet set QIB_PRESENT, so use read directly */ dd->revision = readq(&dd->kregbase[kr_revision]); if ((dd->revision & 0xffffffffU) == 0xffffffffU) { qib_dev_err(dd, "Revision register read failure, giving up initialization\n"); ret = -ENODEV; goto bail; } dd->flags |= QIB_PRESENT; /* now register routines work */ dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMajor); dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, ChipRevMinor); dd->cspec->r1 = dd->minrev == 1; get_7322_chip_params(dd); features = qib_7322_boardname(dd); /* now that piobcnt2k and 4k set, we can allocate these */ sbufcnt = dd->piobcnt2k + dd->piobcnt4k + NUM_VL15_BUFS + BITS_PER_LONG - 1; sbufcnt /= BITS_PER_LONG; dd->cspec->sendchkenable = kmalloc(sbufcnt * sizeof(*dd->cspec->sendchkenable), GFP_KERNEL); dd->cspec->sendgrhchk = kmalloc(sbufcnt * sizeof(*dd->cspec->sendgrhchk), GFP_KERNEL); dd->cspec->sendibchk = kmalloc(sbufcnt * sizeof(*dd->cspec->sendibchk), GFP_KERNEL); if (!dd->cspec->sendchkenable || !dd->cspec->sendgrhchk || !dd->cspec->sendibchk) { ret = -ENOMEM; goto bail; } ppd = dd->pport; /* * GPIO bits for TWSI data and clock, * used for serial EEPROM. */ dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; dd->twsi_eeprom_dev = QIB_TWSI_EEPROM_DEV; dd->flags |= QIB_HAS_INTX | QIB_HAS_LINK_LATENCY | QIB_NODMA_RTAIL | QIB_HAS_VLSUPP | QIB_HAS_HDRSUPP | QIB_HAS_THRESH_UPDATE | (sdma_idle_cnt ? QIB_HAS_SDMA_TIMEOUT : 0); dd->flags |= qib_special_trigger ? QIB_USE_SPCL_TRIG : QIB_HAS_SEND_DMA; /* * Setup initial values. These may change when PAT is enabled, but * we need these to do initial chip register accesses. */ qib_7322_set_baseaddrs(dd); mtu = ib_mtu_enum_to_int(qib_ibmtu); if (mtu == -1) mtu = QIB_DEFAULT_MTU; dd->cspec->int_enable_mask = QIB_I_BITSEXTANT; /* all hwerrors become interrupts, unless special purposed */ dd->cspec->hwerrmask = ~0ULL; /* link_recovery setup causes these errors, so ignore them, * other than clearing them when they occur */ dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | HWE_MASK(LATriggered)); for (pidx = 0; pidx < NUM_IB_PORTS; ++pidx) { struct qib_chippport_specific *cp = ppd->cpspec; ppd->link_speed_supported = features & PORT_SPD_CAP; features >>= PORT_SPD_CAP_SHIFT; if (!ppd->link_speed_supported) { /* single port mode (7340, or configured) */ dd->skip_kctxt_mask |= 1 << pidx; if (pidx == 0) { /* Make sure port is disabled. */ qib_write_kreg_port(ppd, krp_rcvctrl, 0); qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); ppd[0] = ppd[1]; dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_0) | SYM_MASK(HwErrMask, SDmaMemReadErrMask_0)); dd->cspec->int_enable_mask &= ~( SYM_MASK(IntMask, SDmaCleanupDoneMask_0) | SYM_MASK(IntMask, SDmaIdleIntMask_0) | SYM_MASK(IntMask, SDmaProgressIntMask_0) | SYM_MASK(IntMask, SDmaIntMask_0) | SYM_MASK(IntMask, ErrIntMask_0) | SYM_MASK(IntMask, SendDoneIntMask_0)); } else { /* Make sure port is disabled. */ qib_write_kreg_port(ppd, krp_rcvctrl, 0); qib_write_kreg_port(ppd, krp_ibcctrl_a, 0); dd->cspec->hwerrmask &= ~(SYM_MASK(HwErrMask, IBSerdesPClkNotDetectMask_1) | SYM_MASK(HwErrMask, SDmaMemReadErrMask_1)); dd->cspec->int_enable_mask &= ~( SYM_MASK(IntMask, SDmaCleanupDoneMask_1) | SYM_MASK(IntMask, SDmaIdleIntMask_1) | SYM_MASK(IntMask, SDmaProgressIntMask_1) | SYM_MASK(IntMask, SDmaIntMask_1) | SYM_MASK(IntMask, ErrIntMask_1) | SYM_MASK(IntMask, SendDoneIntMask_1)); } continue; } dd->num_pports++; ret = qib_init_pportdata(ppd, dd, pidx, dd->num_pports); if (ret) { dd->num_pports--; goto bail; } ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; ppd->link_width_enabled = IB_WIDTH_4X; ppd->link_speed_enabled = ppd->link_speed_supported; /* * Set the initial values to reasonable default, will be set * for real when link is up. */ ppd->link_width_active = IB_WIDTH_4X; ppd->link_speed_active = QIB_IB_SDR; ppd->delay_mult = ib_rate_to_delay[IB_RATE_10_GBPS]; switch (qib_num_cfg_vls) { case 1: ppd->vls_supported = IB_VL_VL0; break; case 2: ppd->vls_supported = IB_VL_VL0_1; break; default: qib_devinfo(dd->pcidev, "Invalid num_vls %u, using 4 VLs\n", qib_num_cfg_vls); qib_num_cfg_vls = 4; /* fall through */ case 4: ppd->vls_supported = IB_VL_VL0_3; break; case 8: if (mtu <= 2048) ppd->vls_supported = IB_VL_VL0_7; else { qib_devinfo(dd->pcidev, "Invalid num_vls %u for MTU %d , using 4 VLs\n", qib_num_cfg_vls, mtu); ppd->vls_supported = IB_VL_VL0_3; qib_num_cfg_vls = 4; } break; } ppd->vls_operational = ppd->vls_supported; init_waitqueue_head(&cp->autoneg_wait); INIT_DELAYED_WORK(&cp->autoneg_work, autoneg_7322_work); if (ppd->dd->cspec->r1) INIT_DELAYED_WORK(&cp->ipg_work, ipg_7322_work); /* * For Mez and similar cards, no qsfp info, so do * the "cable info" setup here. Can be overridden * in adapter-specific routines. */ if (!(dd->flags & QIB_HAS_QSFP)) { if (!IS_QMH(dd) && !IS_QME(dd)) qib_devinfo(dd->pcidev, "IB%u:%u: Unknown mezzanine card type\n", dd->unit, ppd->port); cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; /* * Choose center value as default tx serdes setting * until changed through module parameter. */ ppd->cpspec->no_eep = IS_QMH(dd) ? TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; } else cp->h1_val = H1_FORCE_VAL; /* Avoid writes to chip for mini_init */ if (!qib_mini_init) write_7322_init_portregs(ppd); timer_setup(&cp->chase_timer, reenable_chase, 0); ppd++; } dd->rcvhdrentsize = qib_rcvhdrentsize ? qib_rcvhdrentsize : QIB_RCVHDR_ENTSIZE; dd->rcvhdrsize = qib_rcvhdrsize ? qib_rcvhdrsize : QIB_DFLT_RCVHDRSIZE; dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); /* we always allocate at least 2048 bytes for eager buffers */ dd->rcvegrbufsize = max(mtu, 2048); BUG_ON(!is_power_of_2(dd->rcvegrbufsize)); dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); qib_7322_tidtemplate(dd); /* * We can request a receive interrupt for 1 or * more packets from current offset. */ dd->rhdrhead_intr_off = (u64) rcv_int_count << IBA7322_HDRHEAD_PKTINT_SHIFT; /* setup the stats timer; the add_timer is done at end of init */ timer_setup(&dd->stats_timer, qib_get_7322_faststats, 0); dd->ureg_align = 0x10000; /* 64KB alignment */ dd->piosize2kmax_dwords = dd->piosize2k >> 2; qib_7322_config_ctxts(dd); qib_set_ctxtcnt(dd); /* * We do not set WC on the VL15 buffers to avoid * a rare problem with unaligned writes from * interrupt-flushed store buffers, so we need * to map those separately here. We can't solve * this for the rarely used mtrr case. */ ret = init_chip_wc_pat(dd, 0); if (ret) goto bail; /* vl15 buffers start just after the 4k buffers */ vl15off = dd->physaddr + (dd->piobufbase >> 32) + dd->piobcnt4k * dd->align4k; dd->piovl15base = ioremap_nocache(vl15off, NUM_VL15_BUFS * dd->align4k); if (!dd->piovl15base) { ret = -ENOMEM; goto bail; } qib_7322_set_baseaddrs(dd); /* set chip access pointers now */ ret = 0; if (qib_mini_init) goto bail; if (!dd->num_pports) { qib_dev_err(dd, "No ports enabled, giving up initialization\n"); goto bail; /* no error, so can still figure out why err */ } write_7322_initregs(dd); ret = qib_create_ctxts(dd); init_7322_cntrnames(dd); updthresh = 8U; /* update threshold */ /* use all of 4KB buffers for the kernel SDMA, zero if !SDMA. * reserve the update threshold amount for other kernel use, such * as sending SMI, MAD, and ACKs, or 3, whichever is greater, * unless we aren't enabling SDMA, in which case we want to use * all the 4k bufs for the kernel. * if this was less than the update threshold, we could wait * a long time for an update. Coded this way because we * sometimes change the update threshold for various reasons, * and we want this to remain robust. */ if (dd->flags & QIB_HAS_SEND_DMA) { dd->cspec->sdmabufcnt = dd->piobcnt4k; sbufs = updthresh > 3 ? updthresh : 3; } else { dd->cspec->sdmabufcnt = 0; sbufs = dd->piobcnt4k; } dd->cspec->lastbuf_for_pio = dd->piobcnt2k + dd->piobcnt4k - dd->cspec->sdmabufcnt; dd->lastctxt_piobuf = dd->cspec->lastbuf_for_pio - sbufs; dd->cspec->lastbuf_for_pio--; /* range is <= , not < */ dd->last_pio = dd->cspec->lastbuf_for_pio; dd->pbufsctxt = (dd->cfgctxts > dd->first_user_ctxt) ? dd->lastctxt_piobuf / (dd->cfgctxts - dd->first_user_ctxt) : 0; /* * If we have 16 user contexts, we will have 7 sbufs * per context, so reduce the update threshold to match. We * want to update before we actually run out, at low pbufs/ctxt * so give ourselves some margin. */ if (dd->pbufsctxt >= 2 && dd->pbufsctxt - 2 < updthresh) updthresh = dd->pbufsctxt - 2; dd->cspec->updthresh_dflt = updthresh; dd->cspec->updthresh = updthresh; /* before full enable, no interrupts, no locking needed */ dd->sendctrl |= ((updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) << SYM_LSB(SendCtrl, AvailUpdThld)) | SYM_MASK(SendCtrl, SendBufAvailPad64Byte); dd->psxmitwait_supported = 1; dd->psxmitwait_check_rate = QIB_7322_PSXMITWAIT_CHECK_RATE; bail: if (!dd->ctxtcnt) dd->ctxtcnt = 1; /* for other initialization code */ return ret; } static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *ppd, u64 pbc, u32 *pbufnum) { u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; struct qib_devdata *dd = ppd->dd; /* last is same for 2k and 4k, because we use 4k if all 2k busy */ if (pbc & PBC_7322_VL15_SEND) { first = dd->piobcnt2k + dd->piobcnt4k + ppd->hw_pidx; last = first; } else { if ((plen + 1) > dd->piosize2kmax_dwords) first = dd->piobcnt2k; else first = 0; last = dd->cspec->lastbuf_for_pio; } return qib_getsendbuf_range(dd, pbufnum, first, last); } static void qib_set_cntr_7322_sample(struct qib_pportdata *ppd, u32 intv, u32 start) { qib_write_kreg_port(ppd, krp_psinterval, intv); qib_write_kreg_port(ppd, krp_psstart, start); } /* * Must be called with sdma_lock held, or before init finished. */ static void qib_sdma_set_7322_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) { qib_write_kreg_port(ppd, krp_senddmadesccnt, cnt); } /* * sdma_lock should be acquired before calling this routine */ static void dump_sdma_7322_state(struct qib_pportdata *ppd) { u64 reg, reg1, reg2; reg = qib_read_kreg_port(ppd, krp_senddmastatus); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmastatus: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_sendctrl); qib_dev_porterr(ppd->dd, ppd->port, "SDMA sendctrl: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmabase); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmabase: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmabufmask0); reg1 = qib_read_kreg_port(ppd, krp_senddmabufmask1); reg2 = qib_read_kreg_port(ppd, krp_senddmabufmask2); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmabufmask 0:%llx 1:%llx 2:%llx\n", reg, reg1, reg2); /* get bufuse bits, clear them, and print them again if non-zero */ reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg); reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg1); reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); qib_write_kreg_port(ppd, krp_senddmabuf_use0, reg2); /* 0 and 1 should always be zero, so print as short form */ qib_dev_porterr(ppd->dd, ppd->port, "SDMA current senddmabuf_use 0:%llx 1:%llx 2:%llx\n", reg, reg1, reg2); reg = qib_read_kreg_port(ppd, krp_senddmabuf_use0); reg1 = qib_read_kreg_port(ppd, krp_senddmabuf_use1); reg2 = qib_read_kreg_port(ppd, krp_senddmabuf_use2); /* 0 and 1 should always be zero, so print as short form */ qib_dev_porterr(ppd->dd, ppd->port, "SDMA cleared senddmabuf_use 0:%llx 1:%llx 2:%llx\n", reg, reg1, reg2); reg = qib_read_kreg_port(ppd, krp_senddmatail); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmatail: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmahead); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmahead: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmaheadaddr); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmaheadaddr: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmalengen); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmalengen: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmadesccnt); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmadesccnt: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmaidlecnt); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmaidlecnt: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmaprioritythld); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmapriorityhld: 0x%016llx\n", reg); reg = qib_read_kreg_port(ppd, krp_senddmareloadcnt); qib_dev_porterr(ppd->dd, ppd->port, "SDMA senddmareloadcnt: 0x%016llx\n", reg); dump_sdma_state(ppd); } static struct sdma_set_state_action sdma_7322_action_table[] = { [qib_sdma_state_s00_hw_down] = { .go_s99_running_tofalse = 1, .op_enable = 0, .op_intenable = 0, .op_halt = 0, .op_drain = 0, }, [qib_sdma_state_s10_hw_start_up_wait] = { .op_enable = 0, .op_intenable = 1, .op_halt = 1, .op_drain = 0, }, [qib_sdma_state_s20_idle] = { .op_enable = 1, .op_intenable = 1, .op_halt = 1, .op_drain = 0, }, [qib_sdma_state_s30_sw_clean_up_wait] = { .op_enable = 0, .op_intenable = 1, .op_halt = 1, .op_drain = 0, }, [qib_sdma_state_s40_hw_clean_up_wait] = { .op_enable = 1, .op_intenable = 1, .op_halt = 1, .op_drain = 0, }, [qib_sdma_state_s50_hw_halt_wait] = { .op_enable = 1, .op_intenable = 1, .op_halt = 1, .op_drain = 1, }, [qib_sdma_state_s99_running] = { .op_enable = 1, .op_intenable = 1, .op_halt = 0, .op_drain = 0, .go_s99_running_totrue = 1, }, }; static void qib_7322_sdma_init_early(struct qib_pportdata *ppd) { ppd->sdma_state.set_state_action = sdma_7322_action_table; } static int init_sdma_7322_regs(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; unsigned lastbuf, erstbuf; u64 senddmabufmask[3] = { 0 }; int n, ret = 0; qib_write_kreg_port(ppd, krp_senddmabase, ppd->sdma_descq_phys); qib_sdma_7322_setlengen(ppd); qib_sdma_update_7322_tail(ppd, 0); /* Set SendDmaTail */ qib_write_kreg_port(ppd, krp_senddmareloadcnt, sdma_idle_cnt); qib_write_kreg_port(ppd, krp_senddmadesccnt, 0); qib_write_kreg_port(ppd, krp_senddmaheadaddr, ppd->sdma_head_phys); if (dd->num_pports) n = dd->cspec->sdmabufcnt / dd->num_pports; /* no remainder */ else n = dd->cspec->sdmabufcnt; /* failsafe for init */ erstbuf = (dd->piobcnt2k + dd->piobcnt4k) - ((dd->num_pports == 1 || ppd->port == 2) ? n : dd->cspec->sdmabufcnt); lastbuf = erstbuf + n; ppd->sdma_state.first_sendbuf = erstbuf; ppd->sdma_state.last_sendbuf = lastbuf; for (; erstbuf < lastbuf; ++erstbuf) { unsigned word = erstbuf / BITS_PER_LONG; unsigned bit = erstbuf & (BITS_PER_LONG - 1); BUG_ON(word >= 3); senddmabufmask[word] |= 1ULL << bit; } qib_write_kreg_port(ppd, krp_senddmabufmask0, senddmabufmask[0]); qib_write_kreg_port(ppd, krp_senddmabufmask1, senddmabufmask[1]); qib_write_kreg_port(ppd, krp_senddmabufmask2, senddmabufmask[2]); return ret; } /* sdma_lock must be held */ static u16 qib_sdma_7322_gethead(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; int sane; int use_dmahead; u16 swhead; u16 swtail; u16 cnt; u16 hwhead; use_dmahead = __qib_sdma_running(ppd) && (dd->flags & QIB_HAS_SDMA_TIMEOUT); retry: hwhead = use_dmahead ? (u16) le64_to_cpu(*ppd->sdma_head_dma) : (u16) qib_read_kreg_port(ppd, krp_senddmahead); swhead = ppd->sdma_descq_head; swtail = ppd->sdma_descq_tail; cnt = ppd->sdma_descq_cnt; if (swhead < swtail) /* not wrapped */ sane = (hwhead >= swhead) & (hwhead <= swtail); else if (swhead > swtail) /* wrapped around */ sane = ((hwhead >= swhead) && (hwhead < cnt)) || (hwhead <= swtail); else /* empty */ sane = (hwhead == swhead); if (unlikely(!sane)) { if (use_dmahead) { /* try one more time, directly from the register */ use_dmahead = 0; goto retry; } /* proceed as if no progress */ hwhead = swhead; } return hwhead; } static int qib_sdma_7322_busy(struct qib_pportdata *ppd) { u64 hwstatus = qib_read_kreg_port(ppd, krp_senddmastatus); return (hwstatus & SYM_MASK(SendDmaStatus_0, ScoreBoardDrainInProg)) || (hwstatus & SYM_MASK(SendDmaStatus_0, HaltInProg)) || !(hwstatus & SYM_MASK(SendDmaStatus_0, InternalSDmaHalt)) || !(hwstatus & SYM_MASK(SendDmaStatus_0, ScbEmpty)); } /* * Compute the amount of delay before sending the next packet if the * port's send rate differs from the static rate set for the QP. * The delay affects the next packet and the amount of the delay is * based on the length of the this packet. */ static u32 qib_7322_setpbc_control(struct qib_pportdata *ppd, u32 plen, u8 srate, u8 vl) { u8 snd_mult = ppd->delay_mult; u8 rcv_mult = ib_rate_to_delay[srate]; u32 ret; ret = rcv_mult > snd_mult ? ((plen + 1) >> 1) * snd_mult : 0; /* Indicate VL15, else set the VL in the control word */ if (vl == 15) ret |= PBC_7322_VL15_SEND_CTRL; else ret |= vl << PBC_VL_NUM_LSB; ret |= ((u32)(ppd->hw_pidx)) << PBC_PORT_SEL_LSB; return ret; } /* * Enable the per-port VL15 send buffers for use. * They follow the rest of the buffers, without a config parameter. * This was in initregs, but that is done before the shadow * is set up, and this has to be done after the shadow is * set up. */ static void qib_7322_initvl15_bufs(struct qib_devdata *dd) { unsigned vl15bufs; vl15bufs = dd->piobcnt2k + dd->piobcnt4k; qib_chg_pioavailkernel(dd, vl15bufs, NUM_VL15_BUFS, TXCHK_CHG_TYPE_KERN, NULL); } static void qib_7322_init_ctxt(struct qib_ctxtdata *rcd) { if (rcd->ctxt < NUM_IB_PORTS) { if (rcd->dd->num_pports > 1) { rcd->rcvegrcnt = KCTXT0_EGRCNT / 2; rcd->rcvegr_tid_base = rcd->ctxt ? rcd->rcvegrcnt : 0; } else { rcd->rcvegrcnt = KCTXT0_EGRCNT; rcd->rcvegr_tid_base = 0; } } else { rcd->rcvegrcnt = rcd->dd->cspec->rcvegrcnt; rcd->rcvegr_tid_base = KCTXT0_EGRCNT + (rcd->ctxt - NUM_IB_PORTS) * rcd->rcvegrcnt; } } #define QTXSLEEPS 5000 static void qib_7322_txchk_change(struct qib_devdata *dd, u32 start, u32 len, u32 which, struct qib_ctxtdata *rcd) { int i; const int last = start + len - 1; const int lastr = last / BITS_PER_LONG; u32 sleeps = 0; int wait = rcd != NULL; unsigned long flags; while (wait) { unsigned long shadow = 0; int cstart, previ = -1; /* * when flipping from kernel to user, we can't change * the checking type if the buffer is allocated to the * driver. It's OK the other direction, because it's * from close, and we have just disarm'ed all the * buffers. All the kernel to kernel changes are also * OK. */ for (cstart = start; cstart <= last; cstart++) { i = ((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) / BITS_PER_LONG; if (i != previ) { shadow = (unsigned long) le64_to_cpu(dd->pioavailregs_dma[i]); previ = i; } if (test_bit(((2 * cstart) + QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT) % BITS_PER_LONG, &shadow)) break; } if (cstart > last) break; if (sleeps == QTXSLEEPS) break; /* make sure we see an updated copy next time around */ sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); sleeps++; msleep(20); } switch (which) { case TXCHK_CHG_TYPE_DIS1: /* * disable checking on a range; used by diags; just * one buffer, but still written generically */ for (i = start; i <= last; i++) clear_bit(i, dd->cspec->sendchkenable); break; case TXCHK_CHG_TYPE_ENAB1: /* * (re)enable checking on a range; used by diags; just * one buffer, but still written generically; read * scratch to be sure buffer actually triggered, not * just flushed from processor. */ qib_read_kreg32(dd, kr_scratch); for (i = start; i <= last; i++) set_bit(i, dd->cspec->sendchkenable); break; case TXCHK_CHG_TYPE_KERN: /* usable by kernel */ for (i = start; i <= last; i++) { set_bit(i, dd->cspec->sendibchk); clear_bit(i, dd->cspec->sendgrhchk); } spin_lock_irqsave(&dd->uctxt_lock, flags); /* see if we need to raise avail update threshold */ for (i = dd->first_user_ctxt; dd->cspec->updthresh != dd->cspec->updthresh_dflt && i < dd->cfgctxts; i++) if (dd->rcd[i] && dd->rcd[i]->subctxt_cnt && ((dd->rcd[i]->piocnt / dd->rcd[i]->subctxt_cnt) - 1) < dd->cspec->updthresh_dflt) break; spin_unlock_irqrestore(&dd->uctxt_lock, flags); if (i == dd->cfgctxts) { spin_lock_irqsave(&dd->sendctrl_lock, flags); dd->cspec->updthresh = dd->cspec->updthresh_dflt; dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); dd->sendctrl |= (dd->cspec->updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) << SYM_LSB(SendCtrl, AvailUpdThld); spin_unlock_irqrestore(&dd->sendctrl_lock, flags); sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); } break; case TXCHK_CHG_TYPE_USER: /* for user process */ for (i = start; i <= last; i++) { clear_bit(i, dd->cspec->sendibchk); set_bit(i, dd->cspec->sendgrhchk); } spin_lock_irqsave(&dd->sendctrl_lock, flags); if (rcd && rcd->subctxt_cnt && ((rcd->piocnt / rcd->subctxt_cnt) - 1) < dd->cspec->updthresh) { dd->cspec->updthresh = (rcd->piocnt / rcd->subctxt_cnt) - 1; dd->sendctrl &= ~SYM_MASK(SendCtrl, AvailUpdThld); dd->sendctrl |= (dd->cspec->updthresh & SYM_RMASK(SendCtrl, AvailUpdThld)) << SYM_LSB(SendCtrl, AvailUpdThld); spin_unlock_irqrestore(&dd->sendctrl_lock, flags); sendctrl_7322_mod(dd->pport, QIB_SENDCTRL_AVAIL_BLIP); } else spin_unlock_irqrestore(&dd->sendctrl_lock, flags); break; default: break; } for (i = start / BITS_PER_LONG; which >= 2 && i <= lastr; ++i) qib_write_kreg(dd, kr_sendcheckmask + i, dd->cspec->sendchkenable[i]); for (i = start / BITS_PER_LONG; which < 2 && i <= lastr; ++i) { qib_write_kreg(dd, kr_sendgrhcheckmask + i, dd->cspec->sendgrhchk[i]); qib_write_kreg(dd, kr_sendibpktmask + i, dd->cspec->sendibchk[i]); } /* * Be sure whatever we did was seen by the chip and acted upon, * before we return. Mostly important for which >= 2. */ qib_read_kreg32(dd, kr_scratch); } /* useful for trigger analyzers, etc. */ static void writescratch(struct qib_devdata *dd, u32 val) { qib_write_kreg(dd, kr_scratch, val); } /* Dummy for now, use chip regs soon */ static int qib_7322_tempsense_rd(struct qib_devdata *dd, int regnum) { return -ENXIO; } /** * qib_init_iba7322_funcs - set up the chip-specific function pointers * @dev: the pci_dev for qlogic_ib device * @ent: pci_device_id struct for this dev * * Also allocates, inits, and returns the devdata struct for this * device instance * * This is global, and is called directly at init to set up the * chip-specific function pointers for later use. */ struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *pdev, const struct pci_device_id *ent) { struct qib_devdata *dd; int ret, i; u32 tabsize, actual_cnt = 0; dd = qib_alloc_devdata(pdev, NUM_IB_PORTS * sizeof(struct qib_pportdata) + sizeof(struct qib_chip_specific) + NUM_IB_PORTS * sizeof(struct qib_chippport_specific)); if (IS_ERR(dd)) goto bail; dd->f_bringup_serdes = qib_7322_bringup_serdes; dd->f_cleanup = qib_setup_7322_cleanup; dd->f_clear_tids = qib_7322_clear_tids; dd->f_free_irq = qib_7322_free_irq; dd->f_get_base_info = qib_7322_get_base_info; dd->f_get_msgheader = qib_7322_get_msgheader; dd->f_getsendbuf = qib_7322_getsendbuf; dd->f_gpio_mod = gpio_7322_mod; dd->f_eeprom_wen = qib_7322_eeprom_wen; dd->f_hdrqempty = qib_7322_hdrqempty; dd->f_ib_updown = qib_7322_ib_updown; dd->f_init_ctxt = qib_7322_init_ctxt; dd->f_initvl15_bufs = qib_7322_initvl15_bufs; dd->f_intr_fallback = qib_7322_intr_fallback; dd->f_late_initreg = qib_late_7322_initreg; dd->f_setpbc_control = qib_7322_setpbc_control; dd->f_portcntr = qib_portcntr_7322; dd->f_put_tid = qib_7322_put_tid; dd->f_quiet_serdes = qib_7322_mini_quiet_serdes; dd->f_rcvctrl = rcvctrl_7322_mod; dd->f_read_cntrs = qib_read_7322cntrs; dd->f_read_portcntrs = qib_read_7322portcntrs; dd->f_reset = qib_do_7322_reset; dd->f_init_sdma_regs = init_sdma_7322_regs; dd->f_sdma_busy = qib_sdma_7322_busy; dd->f_sdma_gethead = qib_sdma_7322_gethead; dd->f_sdma_sendctrl = qib_7322_sdma_sendctrl; dd->f_sdma_set_desc_cnt = qib_sdma_set_7322_desc_cnt; dd->f_sdma_update_tail = qib_sdma_update_7322_tail; dd->f_sendctrl = sendctrl_7322_mod; dd->f_set_armlaunch = qib_set_7322_armlaunch; dd->f_set_cntr_sample = qib_set_cntr_7322_sample; dd->f_iblink_state = qib_7322_iblink_state; dd->f_ibphys_portstate = qib_7322_phys_portstate; dd->f_get_ib_cfg = qib_7322_get_ib_cfg; dd->f_set_ib_cfg = qib_7322_set_ib_cfg; dd->f_set_ib_loopback = qib_7322_set_loopback; dd->f_get_ib_table = qib_7322_get_ib_table; dd->f_set_ib_table = qib_7322_set_ib_table; dd->f_set_intr_state = qib_7322_set_intr_state; dd->f_setextled = qib_setup_7322_setextled; dd->f_txchk_change = qib_7322_txchk_change; dd->f_update_usrhead = qib_update_7322_usrhead; dd->f_wantpiobuf_intr = qib_wantpiobuf_7322_intr; dd->f_xgxs_reset = qib_7322_mini_pcs_reset; dd->f_sdma_hw_clean_up = qib_7322_sdma_hw_clean_up; dd->f_sdma_hw_start_up = qib_7322_sdma_hw_start_up; dd->f_sdma_init_early = qib_7322_sdma_init_early; dd->f_writescratch = writescratch; dd->f_tempsense_rd = qib_7322_tempsense_rd; #ifdef CONFIG_INFINIBAND_QIB_DCA dd->f_notify_dca = qib_7322_notify_dca; #endif /* * Do remaining PCIe setup and save PCIe values in dd. * Any error printing is already done by the init code. * On return, we have the chip mapped, but chip registers * are not set up until start of qib_init_7322_variables. */ ret = qib_pcie_ddinit(dd, pdev, ent); if (ret < 0) goto bail_free; /* initialize chip-specific variables */ ret = qib_init_7322_variables(dd); if (ret) goto bail_cleanup; if (qib_mini_init || !dd->num_pports) goto bail; /* * Determine number of vectors we want; depends on port count * and number of configured kernel receive queues actually used. * Should also depend on whether sdma is enabled or not, but * that's such a rare testing case it's not worth worrying about. */ tabsize = dd->first_user_ctxt + ARRAY_SIZE(irq_table); for (i = 0; i < tabsize; i++) if ((i < ARRAY_SIZE(irq_table) && irq_table[i].port <= dd->num_pports) || (i >= ARRAY_SIZE(irq_table) && dd->rcd[i - ARRAY_SIZE(irq_table)])) actual_cnt++; /* reduce by ctxt's < 2 */ if (qib_krcvq01_no_msi) actual_cnt -= dd->num_pports; tabsize = actual_cnt; dd->cspec->msix_entries = kzalloc(tabsize * sizeof(struct qib_msix_entry), GFP_KERNEL); if (!dd->cspec->msix_entries) tabsize = 0; if (qib_pcie_params(dd, 8, &tabsize)) qib_dev_err(dd, "Failed to setup PCIe or interrupts; continuing anyway\n"); /* may be less than we wanted, if not enough available */ dd->cspec->num_msix_entries = tabsize; /* setup interrupt handler */ qib_setup_7322_interrupt(dd, 1); /* clear diagctrl register, in case diags were running and crashed */ qib_write_kreg(dd, kr_hwdiagctrl, 0); #ifdef CONFIG_INFINIBAND_QIB_DCA if (!dca_add_requester(&pdev->dev)) { qib_devinfo(dd->pcidev, "DCA enabled\n"); dd->flags |= QIB_DCA_ENABLED; qib_setup_dca(dd); } #endif goto bail; bail_cleanup: qib_pcie_ddcleanup(dd); bail_free: qib_free_devdata(dd); dd = ERR_PTR(ret); bail: return dd; } /* * Set the table entry at the specified index from the table specifed. * There are 3 * TXDDS_TABLE_SZ entries in all per port, with the first * TXDDS_TABLE_SZ for SDR, the next for DDR, and the last for QDR. * 'idx' below addresses the correct entry, while its 4 LSBs select the * corresponding entry (one of TXDDS_TABLE_SZ) from the selected table. */ #define DDS_ENT_AMP_LSB 14 #define DDS_ENT_MAIN_LSB 9 #define DDS_ENT_POST_LSB 5 #define DDS_ENT_PRE_XTRA_LSB 3 #define DDS_ENT_PRE_LSB 0 /* * Set one entry in the TxDDS table for spec'd port * ridx picks one of the entries, while tp points * to the appropriate table entry. */ static void set_txdds(struct qib_pportdata *ppd, int ridx, const struct txdds_ent *tp) { struct qib_devdata *dd = ppd->dd; u32 pack_ent; int regidx; /* Get correct offset in chip-space, and in source table */ regidx = KREG_IBPORT_IDX(IBSD_DDS_MAP_TABLE) + ridx; /* * We do not use qib_write_kreg_port() because it was intended * only for registers in the lower "port specific" pages. * So do index calculation by hand. */ if (ppd->hw_pidx) regidx += (dd->palign / sizeof(u64)); pack_ent = tp->amp << DDS_ENT_AMP_LSB; pack_ent |= tp->main << DDS_ENT_MAIN_LSB; pack_ent |= tp->pre << DDS_ENT_PRE_LSB; pack_ent |= tp->post << DDS_ENT_POST_LSB; qib_write_kreg(dd, regidx, pack_ent); /* Prevent back-to-back writes by hitting scratch */ qib_write_kreg(ppd->dd, kr_scratch, 0); } static const struct vendor_txdds_ent vendor_txdds[] = { { /* Amphenol 1m 30awg NoEq */ { 0x41, 0x50, 0x48 }, "584470002 ", { 10, 0, 0, 5 }, { 10, 0, 0, 9 }, { 7, 1, 0, 13 }, }, { /* Amphenol 3m 28awg NoEq */ { 0x41, 0x50, 0x48 }, "584470004 ", { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 7, 15 }, }, { /* Finisar 3m OM2 Optical */ { 0x00, 0x90, 0x65 }, "FCBG410QB1C03-QL", { 0, 0, 0, 3 }, { 0, 0, 0, 4 }, { 0, 0, 0, 13 }, }, { /* Finisar 30m OM2 Optical */ { 0x00, 0x90, 0x65 }, "FCBG410QB1C30-QL", { 0, 0, 0, 1 }, { 0, 0, 0, 5 }, { 0, 0, 0, 11 }, }, { /* Finisar Default OM2 Optical */ { 0x00, 0x90, 0x65 }, NULL, { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 0, 0, 12 }, }, { /* Gore 1m 30awg NoEq */ { 0x00, 0x21, 0x77 }, "QSN3300-1 ", { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 0, 15 }, }, { /* Gore 2m 30awg NoEq */ { 0x00, 0x21, 0x77 }, "QSN3300-2 ", { 0, 0, 0, 8 }, { 0, 0, 0, 10 }, { 0, 1, 7, 15 }, }, { /* Gore 1m 28awg NoEq */ { 0x00, 0x21, 0x77 }, "QSN3800-1 ", { 0, 0, 0, 6 }, { 0, 0, 0, 8 }, { 0, 1, 0, 15 }, }, { /* Gore 3m 28awg NoEq */ { 0x00, 0x21, 0x77 }, "QSN3800-3 ", { 0, 0, 0, 9 }, { 0, 0, 0, 13 }, { 0, 1, 7, 15 }, }, { /* Gore 5m 24awg Eq */ { 0x00, 0x21, 0x77 }, "QSN7000-5 ", { 0, 0, 0, 7 }, { 0, 0, 0, 9 }, { 0, 1, 3, 15 }, }, { /* Gore 7m 24awg Eq */ { 0x00, 0x21, 0x77 }, "QSN7000-7 ", { 0, 0, 0, 9 }, { 0, 0, 0, 11 }, { 0, 2, 6, 15 }, }, { /* Gore 5m 26awg Eq */ { 0x00, 0x21, 0x77 }, "QSN7600-5 ", { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 0, 1, 9, 13 }, }, { /* Gore 7m 26awg Eq */ { 0x00, 0x21, 0x77 }, "QSN7600-7 ", { 0, 0, 0, 8 }, { 0, 0, 0, 11 }, { 10, 1, 8, 15 }, }, { /* Intersil 12m 24awg Active */ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1224", { 0, 0, 0, 2 }, { 0, 0, 0, 5 }, { 0, 3, 0, 9 }, }, { /* Intersil 10m 28awg Active */ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP1028", { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 2, 0, 2 }, }, { /* Intersil 7m 30awg Active */ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0730", { 0, 0, 0, 6 }, { 0, 0, 0, 4 }, { 0, 1, 0, 3 }, }, { /* Intersil 5m 32awg Active */ { 0x00, 0x30, 0xB4 }, "QLX4000CQSFP0532", { 0, 0, 0, 6 }, { 0, 0, 0, 6 }, { 0, 2, 0, 8 }, }, { /* Intersil Default Active */ { 0x00, 0x30, 0xB4 }, NULL, { 0, 0, 0, 6 }, { 0, 0, 0, 5 }, { 0, 2, 0, 5 }, }, { /* Luxtera 20m Active Optical */ { 0x00, 0x25, 0x63 }, NULL, { 0, 0, 0, 5 }, { 0, 0, 0, 8 }, { 0, 2, 0, 12 }, }, { /* Molex 1M Cu loopback */ { 0x00, 0x09, 0x3A }, "74763-0025 ", { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, { 2, 2, 6, 15 }, }, { /* Molex 2m 28awg NoEq */ { 0x00, 0x09, 0x3A }, "74757-2201 ", { 0, 0, 0, 6 }, { 0, 0, 0, 9 }, { 0, 1, 1, 15 }, }, }; static const struct txdds_ent txdds_sdr[TXDDS_TABLE_SZ] = { /* amp, pre, main, post */ { 2, 2, 15, 6 }, /* Loopback */ { 0, 0, 0, 1 }, /* 2 dB */ { 0, 0, 0, 2 }, /* 3 dB */ { 0, 0, 0, 3 }, /* 4 dB */ { 0, 0, 0, 4 }, /* 5 dB */ { 0, 0, 0, 5 }, /* 6 dB */ { 0, 0, 0, 6 }, /* 7 dB */ { 0, 0, 0, 7 }, /* 8 dB */ { 0, 0, 0, 8 }, /* 9 dB */ { 0, 0, 0, 9 }, /* 10 dB */ { 0, 0, 0, 10 }, /* 11 dB */ { 0, 0, 0, 11 }, /* 12 dB */ { 0, 0, 0, 12 }, /* 13 dB */ { 0, 0, 0, 13 }, /* 14 dB */ { 0, 0, 0, 14 }, /* 15 dB */ { 0, 0, 0, 15 }, /* 16 dB */ }; static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { /* amp, pre, main, post */ { 2, 2, 15, 6 }, /* Loopback */ { 0, 0, 0, 8 }, /* 2 dB */ { 0, 0, 0, 8 }, /* 3 dB */ { 0, 0, 0, 9 }, /* 4 dB */ { 0, 0, 0, 9 }, /* 5 dB */ { 0, 0, 0, 10 }, /* 6 dB */ { 0, 0, 0, 10 }, /* 7 dB */ { 0, 0, 0, 11 }, /* 8 dB */ { 0, 0, 0, 11 }, /* 9 dB */ { 0, 0, 0, 12 }, /* 10 dB */ { 0, 0, 0, 12 }, /* 11 dB */ { 0, 0, 0, 13 }, /* 12 dB */ { 0, 0, 0, 13 }, /* 13 dB */ { 0, 0, 0, 14 }, /* 14 dB */ { 0, 0, 0, 14 }, /* 15 dB */ { 0, 0, 0, 15 }, /* 16 dB */ }; static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { /* amp, pre, main, post */ { 2, 2, 15, 6 }, /* Loopback */ { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ { 0, 1, 0, 11 }, /* 4 dB */ { 0, 1, 0, 13 }, /* 5 dB */ { 0, 1, 0, 15 }, /* 6 dB */ { 0, 1, 3, 15 }, /* 7 dB */ { 0, 1, 7, 15 }, /* 8 dB */ { 0, 1, 7, 15 }, /* 9 dB */ { 0, 1, 8, 15 }, /* 10 dB */ { 0, 1, 9, 15 }, /* 11 dB */ { 0, 1, 10, 15 }, /* 12 dB */ { 0, 2, 6, 15 }, /* 13 dB */ { 0, 2, 7, 15 }, /* 14 dB */ { 0, 2, 8, 15 }, /* 15 dB */ { 0, 2, 9, 15 }, /* 16 dB */ }; /* * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. * These are mostly used for mez cards going through connectors * and backplane traces, but can be used to add other "unusual" * table values as well. */ static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { /* amp, pre, main, post */ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ { 0, 0, 0, 3 }, /* QMH7342 backplane settings */ { 0, 0, 0, 4 }, /* QMH7342 backplane settings */ { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ }; static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { /* amp, pre, main, post */ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ { 0, 0, 0, 9 }, /* QMH7342 backplane settings */ { 0, 0, 0, 10 }, /* QMH7342 backplane settings */ { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ }; static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { /* amp, pre, main, post */ { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ { 0, 1, 0, 10 }, /* QMH7342 backplane settings */ { 0, 1, 0, 12 }, /* QMH7342 backplane settings */ { 0, 1, 4, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 3, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 12 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 14 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 2, 15 }, /* QME7342 backplane settings 1.0 */ { 0, 1, 0, 11 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 7 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 9 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 6 }, /* QME7342 backplane settings 1.1 */ { 0, 1, 0, 8 }, /* QME7342 backplane settings 1.1 */ }; static const struct txdds_ent txdds_extra_mfg[TXDDS_MFG_SZ] = { /* amp, pre, main, post */ { 0, 0, 0, 0 }, /* QME7342 mfg settings */ { 0, 0, 0, 6 }, /* QME7342 P2 mfg settings */ }; static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, unsigned atten) { /* * The attenuation table starts at 2dB for entry 1, * with entry 0 being the loopback entry. */ if (atten <= 2) atten = 1; else if (atten > TXDDS_TABLE_SZ) atten = TXDDS_TABLE_SZ - 1; else atten--; return txdds + atten; } /* * if override is set, the module parameter txselect has a value * for this specific port, so use it, rather than our normal mechanism. */ static void find_best_ent(struct qib_pportdata *ppd, const struct txdds_ent **sdr_dds, const struct txdds_ent **ddr_dds, const struct txdds_ent **qdr_dds, int override) { struct qib_qsfp_cache *qd = &ppd->cpspec->qsfp_data.cache; int idx; /* Search table of known cables */ for (idx = 0; !override && idx < ARRAY_SIZE(vendor_txdds); ++idx) { const struct vendor_txdds_ent *v = vendor_txdds + idx; if (!memcmp(v->oui, qd->oui, QSFP_VOUI_LEN) && (!v->partnum || !memcmp(v->partnum, qd->partnum, QSFP_PN_LEN))) { *sdr_dds = &v->sdr; *ddr_dds = &v->ddr; *qdr_dds = &v->qdr; return; } } /* Active cables don't have attenuation so we only set SERDES * settings to account for the attenuation of the board traces. */ if (!override && QSFP_IS_ACTIVE(qd->tech)) { *sdr_dds = txdds_sdr + ppd->dd->board_atten; *ddr_dds = txdds_ddr + ppd->dd->board_atten; *qdr_dds = txdds_qdr + ppd->dd->board_atten; return; } if (!override && QSFP_HAS_ATTEN(qd->tech) && (qd->atten[0] || qd->atten[1])) { *sdr_dds = get_atten_table(txdds_sdr, qd->atten[0]); *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); return; } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { /* * If we have no (or incomplete) data from the cable * EEPROM, or no QSFP, or override is set, use the * module parameter value to index into the attentuation * table. */ idx = ppd->cpspec->no_eep; *sdr_dds = &txdds_sdr[idx]; *ddr_dds = &txdds_ddr[idx]; *qdr_dds = &txdds_qdr[idx]; } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { /* similar to above, but index into the "extra" table. */ idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; *sdr_dds = &txdds_extra_sdr[idx]; *ddr_dds = &txdds_extra_ddr[idx]; *qdr_dds = &txdds_extra_qdr[idx]; } else if ((IS_QME(ppd->dd) || IS_QMH(ppd->dd)) && ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ + TXDDS_MFG_SZ)) { idx = ppd->cpspec->no_eep - (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); pr_info("IB%u:%u use idx %u into txdds_mfg\n", ppd->dd->unit, ppd->port, idx); *sdr_dds = &txdds_extra_mfg[idx]; *ddr_dds = &txdds_extra_mfg[idx]; *qdr_dds = &txdds_extra_mfg[idx]; } else { /* this shouldn't happen, it's range checked */ *sdr_dds = txdds_sdr + qib_long_atten; *ddr_dds = txdds_ddr + qib_long_atten; *qdr_dds = txdds_qdr + qib_long_atten; } } static void init_txdds_table(struct qib_pportdata *ppd, int override) { const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; struct txdds_ent *dds; int idx; int single_ent = 0; find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); /* for mez cards or override, use the selected value for all entries */ if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) single_ent = 1; /* Fill in the first entry with the best entry found. */ set_txdds(ppd, 0, sdr_dds); set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE)) { dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? ddr_dds : sdr_dds)); write_tx_serdes_param(ppd, dds); } /* Fill in the remaining entries with the default table values. */ for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { set_txdds(ppd, idx, single_ent ? sdr_dds : txdds_sdr + idx); set_txdds(ppd, idx + TXDDS_TABLE_SZ, single_ent ? ddr_dds : txdds_ddr + idx); set_txdds(ppd, idx + 2 * TXDDS_TABLE_SZ, single_ent ? qdr_dds : txdds_qdr + idx); } } #define KR_AHB_ACC KREG_IDX(ahb_access_ctrl) #define KR_AHB_TRANS KREG_IDX(ahb_transaction_reg) #define AHB_TRANS_RDY SYM_MASK(ahb_transaction_reg, ahb_rdy) #define AHB_ADDR_LSB SYM_LSB(ahb_transaction_reg, ahb_address) #define AHB_DATA_LSB SYM_LSB(ahb_transaction_reg, ahb_data) #define AHB_WR SYM_MASK(ahb_transaction_reg, write_not_read) #define AHB_TRANS_TRIES 10 /* * The chan argument is 0=chan0, 1=chan1, 2=pll, 3=chan2, 4=chan4, * 5=subsystem which is why most calls have "chan + chan >> 1" * for the channel argument. */ static u32 ahb_mod(struct qib_devdata *dd, int quad, int chan, int addr, u32 data, u32 mask) { u32 rd_data, wr_data, sz_mask; u64 trans, acc, prev_acc; u32 ret = 0xBAD0BAD; int tries; prev_acc = qib_read_kreg64(dd, KR_AHB_ACC); /* From this point on, make sure we return access */ acc = (quad << 1) | 1; qib_write_kreg(dd, KR_AHB_ACC, acc); for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { trans = qib_read_kreg64(dd, KR_AHB_TRANS); if (trans & AHB_TRANS_RDY) break; } if (tries >= AHB_TRANS_TRIES) { qib_dev_err(dd, "No ahb_rdy in %d tries\n", AHB_TRANS_TRIES); goto bail; } /* If mask is not all 1s, we need to read, but different SerDes * entities have different sizes */ sz_mask = (1UL << ((quad == 1) ? 32 : 16)) - 1; wr_data = data & mask & sz_mask; if ((~mask & sz_mask) != 0) { trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); qib_write_kreg(dd, KR_AHB_TRANS, trans); for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { trans = qib_read_kreg64(dd, KR_AHB_TRANS); if (trans & AHB_TRANS_RDY) break; } if (tries >= AHB_TRANS_TRIES) { qib_dev_err(dd, "No Rd ahb_rdy in %d tries\n", AHB_TRANS_TRIES); goto bail; } /* Re-read in case host split reads and read data first */ trans = qib_read_kreg64(dd, KR_AHB_TRANS); rd_data = (uint32_t)(trans >> AHB_DATA_LSB); wr_data |= (rd_data & ~mask & sz_mask); } /* If mask is not zero, we need to write. */ if (mask & sz_mask) { trans = ((chan << 6) | addr) << (AHB_ADDR_LSB + 1); trans |= ((uint64_t)wr_data << AHB_DATA_LSB); trans |= AHB_WR; qib_write_kreg(dd, KR_AHB_TRANS, trans); for (tries = 1; tries < AHB_TRANS_TRIES; ++tries) { trans = qib_read_kreg64(dd, KR_AHB_TRANS); if (trans & AHB_TRANS_RDY) break; } if (tries >= AHB_TRANS_TRIES) { qib_dev_err(dd, "No Wr ahb_rdy in %d tries\n", AHB_TRANS_TRIES); goto bail; } } ret = wr_data; bail: qib_write_kreg(dd, KR_AHB_ACC, prev_acc); return ret; } static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, unsigned mask) { struct qib_devdata *dd = ppd->dd; int chan; u32 rbc; for (chan = 0; chan < SERDES_CHANS; ++chan) { ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, data, mask); rbc = ahb_mod(dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), addr, 0, 0); } } static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) { u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); if (enable && !state) { pr_info("IB%u:%u Turning LOS on\n", ppd->dd->unit, ppd->port); data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); } else if (!enable && state) { pr_info("IB%u:%u Turning LOS off\n", ppd->dd->unit, ppd->port); data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); } qib_write_kreg_port(ppd, krp_serdesctrl, data); } static int serdes_7322_init(struct qib_pportdata *ppd) { int ret = 0; if (ppd->dd->cspec->r1) ret = serdes_7322_init_old(ppd); else ret = serdes_7322_init_new(ppd); return ret; } static int serdes_7322_init_old(struct qib_pportdata *ppd) { u32 le_val; /* * Initialize the Tx DDS tables. Also done every QSFP event, * for adapters with QSFP */ init_txdds_table(ppd, 0); /* ensure no tx overrides from earlier driver loads */ qib_write_kreg_port(ppd, krp_tx_deemph_override, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, reset_tx_deemphasis_override)); /* Patch some SerDes defaults to "Better for IB" */ /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); /* Enable LE2: rxle2en_r2a addr 13 bit [6] = 1 */ ibsd_wr_allchans(ppd, 13, (1 << 6), (1 << 6)); /* May be overridden in qsfp_7322_event */ le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); /* enable LE1 adaptation for all but QME, which is disabled */ le_val = IS_QME(ppd->dd) ? 0 : 1; ibsd_wr_allchans(ppd, 13, (le_val << 5), (1 << 5)); /* Clear cmode-override, may be set from older driver */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); /* Timing Recovery: rxtapsel addr 5 bits [9:8] = 0 */ ibsd_wr_allchans(ppd, 5, (0 << 8), BMASK(9, 8)); /* setup LoS params; these are subsystem, so chan == 5 */ /* LoS filter threshold_count on, ch 0-3, set to 8 */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); /* LoS filter threshold_count off, ch 0-3, set to 4 */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); /* LoS filter select enabled */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); /* LoS target data: SDR=4, DDR=2, QDR=1 */ ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ serdes_7322_los_enable(ppd, 1); /* rxbistena; set 0 to avoid effects of it switch later */ ibsd_wr_allchans(ppd, 9, 0 << 15, 1 << 15); /* Configure 4 DFE taps, and only they adapt */ ibsd_wr_allchans(ppd, 16, 0 << 0, BMASK(1, 0)); /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); /* * Set receive adaptation mode. SDR and DDR adaptation are * always on, and QDR is initially enabled; later disabled. */ qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); qib_write_kreg_port(ppd, krp_static_adapt_dis(2), ppd->dd->cspec->r1 ? QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); ppd->cpspec->qdr_dfe_on = 1; /* FLoop LOS gate: PPM filter enabled */ ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); /* rx offset center enabled */ ibsd_wr_allchans(ppd, 12, 1 << 4, 1 << 4); if (!ppd->dd->cspec->r1) { ibsd_wr_allchans(ppd, 12, 1 << 12, 1 << 12); ibsd_wr_allchans(ppd, 12, 2 << 8, 0x0f << 8); } /* Set the frequency loop bandwidth to 15 */ ibsd_wr_allchans(ppd, 2, 15 << 5, BMASK(8, 5)); return 0; } static int serdes_7322_init_new(struct qib_pportdata *ppd) { unsigned long tend; u32 le_val, rxcaldone; int chan, chan_done = (1 << SERDES_CHANS) - 1; /* Clear cmode-override, may be set from older driver */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); /* ensure no tx overrides from earlier driver loads */ qib_write_kreg_port(ppd, krp_tx_deemph_override, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, reset_tx_deemphasis_override)); /* START OF LSI SUGGESTED SERDES BRINGUP */ /* Reset - Calibration Setup */ /* Stop DFE adaptaion */ ibsd_wr_allchans(ppd, 1, 0, BMASK(9, 1)); /* Disable LE1 */ ibsd_wr_allchans(ppd, 13, 0, BMASK(5, 5)); /* Disable autoadapt for LE1 */ ibsd_wr_allchans(ppd, 1, 0, BMASK(15, 15)); /* Disable LE2 */ ibsd_wr_allchans(ppd, 13, 0, BMASK(6, 6)); /* Disable VGA */ ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); /* Disable AFE Offset Cancel */ ibsd_wr_allchans(ppd, 12, 0, BMASK(12, 12)); /* Disable Timing Loop */ ibsd_wr_allchans(ppd, 2, 0, BMASK(3, 3)); /* Disable Frequency Loop */ ibsd_wr_allchans(ppd, 2, 0, BMASK(4, 4)); /* Disable Baseline Wander Correction */ ibsd_wr_allchans(ppd, 13, 0, BMASK(13, 13)); /* Disable RX Calibration */ ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); /* Disable RX Offset Calibration */ ibsd_wr_allchans(ppd, 12, 0, BMASK(4, 4)); /* Select BB CDR */ ibsd_wr_allchans(ppd, 2, (1 << 15), BMASK(15, 15)); /* CDR Step Size */ ibsd_wr_allchans(ppd, 5, 0, BMASK(9, 8)); /* Enable phase Calibration */ ibsd_wr_allchans(ppd, 12, (1 << 5), BMASK(5, 5)); /* DFE Bandwidth [2:14-12] */ ibsd_wr_allchans(ppd, 2, (4 << 12), BMASK(14, 12)); /* DFE Config (4 taps only) */ ibsd_wr_allchans(ppd, 16, 0, BMASK(1, 0)); /* Gain Loop Bandwidth */ if (!ppd->dd->cspec->r1) { ibsd_wr_allchans(ppd, 12, 1 << 12, BMASK(12, 12)); ibsd_wr_allchans(ppd, 12, 2 << 8, BMASK(11, 8)); } else { ibsd_wr_allchans(ppd, 19, (3 << 11), BMASK(13, 11)); } /* Baseline Wander Correction Gain [13:4-0] (leave as default) */ /* Baseline Wander Correction Gain [3:7-5] (leave as default) */ /* Data Rate Select [5:7-6] (leave as default) */ /* RX Parallel Word Width [3:10-8] (leave as default) */ /* RX REST */ /* Single- or Multi-channel reset */ /* RX Analog reset */ /* RX Digital reset */ ibsd_wr_allchans(ppd, 0, 0, BMASK(15, 13)); msleep(20); /* RX Analog reset */ ibsd_wr_allchans(ppd, 0, (1 << 14), BMASK(14, 14)); msleep(20); /* RX Digital reset */ ibsd_wr_allchans(ppd, 0, (1 << 13), BMASK(13, 13)); msleep(20); /* setup LoS params; these are subsystem, so chan == 5 */ /* LoS filter threshold_count on, ch 0-3, set to 8 */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 5, 8 << 11, BMASK(14, 11)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 8 << 4, BMASK(7, 4)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 8, 8 << 11, BMASK(14, 11)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 8 << 4, BMASK(7, 4)); /* LoS filter threshold_count off, ch 0-3, set to 4 */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 6, 4 << 0, BMASK(3, 0)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 7, 4 << 8, BMASK(11, 8)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 4 << 0, BMASK(3, 0)); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 4 << 8, BMASK(11, 8)); /* LoS filter select enabled */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 9, 1 << 15, 1 << 15); /* LoS target data: SDR=4, DDR=2, QDR=1 */ ibsd_wr_allchans(ppd, 14, (1 << 3), BMASK(5, 3)); /* QDR */ ibsd_wr_allchans(ppd, 20, (2 << 10), BMASK(12, 10)); /* DDR */ ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */ /* Turn on LOS on initial SERDES init */ serdes_7322_los_enable(ppd, 1); /* FLoop LOS gate: PPM filter enabled */ ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); /* RX LATCH CALIBRATION */ /* Enable Eyefinder Phase Calibration latch */ ibsd_wr_allchans(ppd, 15, 1, BMASK(0, 0)); /* Enable RX Offset Calibration latch */ ibsd_wr_allchans(ppd, 12, (1 << 4), BMASK(4, 4)); msleep(20); /* Start Calibration */ ibsd_wr_allchans(ppd, 4, (1 << 10), BMASK(10, 10)); tend = jiffies + msecs_to_jiffies(500); while (chan_done && !time_is_before_jiffies(tend)) { msleep(20); for (chan = 0; chan < SERDES_CHANS; ++chan) { rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 25, 0, 0); if ((~rxcaldone & (u32)BMASK(9, 9)) == 0 && (~chan_done & (1 << chan)) == 0) chan_done &= ~(1 << chan); } } if (chan_done) { pr_info("Serdes %d calibration not done after .5 sec: 0x%x\n", IBSD(ppd->hw_pidx), chan_done); } else { for (chan = 0; chan < SERDES_CHANS; ++chan) { rxcaldone = ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 25, 0, 0); if ((~rxcaldone & (u32)BMASK(10, 10)) == 0) pr_info("Serdes %d chan %d calibration failed\n", IBSD(ppd->hw_pidx), chan); } } /* Turn off Calibration */ ibsd_wr_allchans(ppd, 4, 0, BMASK(10, 10)); msleep(20); /* BRING RX UP */ /* Set LE2 value (May be overridden in qsfp_7322_event) */ le_val = IS_QME(ppd->dd) ? LE2_QME : LE2_DEFAULT; ibsd_wr_allchans(ppd, 13, (le_val << 7), BMASK(9, 7)); /* Set LE2 Loop bandwidth */ ibsd_wr_allchans(ppd, 3, (7 << 5), BMASK(7, 5)); /* Enable LE2 */ ibsd_wr_allchans(ppd, 13, (1 << 6), BMASK(6, 6)); msleep(20); /* Enable H0 only */ ibsd_wr_allchans(ppd, 1, 1, BMASK(9, 1)); /* gain hi stop 32 (22) (6:1) lo stop 7 (10:7) target 22 (13) (15:11) */ le_val = (ppd->dd->cspec->r1 || IS_QME(ppd->dd)) ? 0xb6c0 : 0x6bac; ibsd_wr_allchans(ppd, 21, le_val, 0xfffe); /* Enable VGA */ ibsd_wr_allchans(ppd, 5, 0, BMASK(0, 0)); msleep(20); /* Set Frequency Loop Bandwidth */ ibsd_wr_allchans(ppd, 2, (15 << 5), BMASK(8, 5)); /* Enable Frequency Loop */ ibsd_wr_allchans(ppd, 2, (1 << 4), BMASK(4, 4)); /* Set Timing Loop Bandwidth */ ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); /* Enable Timing Loop */ ibsd_wr_allchans(ppd, 2, (1 << 3), BMASK(3, 3)); msleep(50); /* Enable DFE * Set receive adaptation mode. SDR and DDR adaptation are * always on, and QDR is initially enabled; later disabled. */ qib_write_kreg_port(ppd, krp_static_adapt_dis(0), 0ULL); qib_write_kreg_port(ppd, krp_static_adapt_dis(1), 0ULL); qib_write_kreg_port(ppd, krp_static_adapt_dis(2), ppd->dd->cspec->r1 ? QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); ppd->cpspec->qdr_dfe_on = 1; /* Disable LE1 */ ibsd_wr_allchans(ppd, 13, (0 << 5), (1 << 5)); /* Disable auto adapt for LE1 */ ibsd_wr_allchans(ppd, 1, (0 << 15), BMASK(15, 15)); msleep(20); /* Enable AFE Offset Cancel */ ibsd_wr_allchans(ppd, 12, (1 << 12), BMASK(12, 12)); /* Enable Baseline Wander Correction */ ibsd_wr_allchans(ppd, 12, (1 << 13), BMASK(13, 13)); /* Termination: rxtermctrl_r2d addr 11 bits [12:11] = 1 */ ibsd_wr_allchans(ppd, 11, (1 << 11), BMASK(12, 11)); /* VGA output common mode */ ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); /* * Initialize the Tx DDS tables. Also done every QSFP event, * for adapters with QSFP */ init_txdds_table(ppd, 0); return 0; } /* start adjust QMH serdes parameters */ static void set_man_code(struct qib_pportdata *ppd, int chan, int code) { ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 9, code << 9, 0x3f << 9); } static void set_man_mode_h1(struct qib_pportdata *ppd, int chan, int enable, u32 tapenable) { if (enable) ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 1, 3 << 10, 0x1f << 10); else ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 1, 0, 0x1f << 10); } /* Set clock to 1, 0, 1, 0 */ static void clock_man(struct qib_pportdata *ppd, int chan) { ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 4, 0x4000, 0x4000); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 4, 0, 0x4000); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 4, 0x4000, 0x4000); ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), (chan + (chan >> 1)), 4, 0, 0x4000); } /* * write the current Tx serdes pre,post,main,amp settings into the serdes. * The caller must pass the settings appropriate for the current speed, * or not care if they are correct for the current speed. */ static void write_tx_serdes_param(struct qib_pportdata *ppd, struct txdds_ent *txdds) { u64 deemph; deemph = qib_read_kreg_port(ppd, krp_tx_deemph_override); /* field names for amp, main, post, pre, respectively */ deemph &= ~(SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a) | SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, tx_override_deemphasis_select); deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txampcntl_d2a); deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena); deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena); deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena); qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); } /* * Set the parameters for mez cards on link bounce, so they are * always exactly what was requested. Similar logic to init_txdds * but does just the serdes. */ static void adj_tx_serdes(struct qib_pportdata *ppd) { const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; struct txdds_ent *dds; find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? ddr_dds : sdr_dds)); write_tx_serdes_param(ppd, dds); } /* set QDR forced value for H1, if needed */ static void force_h1(struct qib_pportdata *ppd) { int chan; ppd->cpspec->qdr_reforce = 0; if (!ppd->dd->cspec->r1) return; for (chan = 0; chan < SERDES_CHANS; chan++) { set_man_mode_h1(ppd, chan, 1, 0); set_man_code(ppd, chan, ppd->cpspec->h1_val); clock_man(ppd, chan); set_man_mode_h1(ppd, chan, 0, 0); } } #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en) #define R_OPCODE_LSB 3 #define R_OP_NOP 0 #define R_OP_SHIFT 2 #define R_OP_UPDATE 3 #define R_TDI_LSB 2 #define R_TDO_LSB 1 #define R_RDY 1 static int qib_r_grab(struct qib_devdata *dd) { u64 val = SJA_EN; qib_write_kreg(dd, kr_r_access, val); qib_read_kreg32(dd, kr_scratch); return 0; } /* qib_r_wait_for_rdy() not only waits for the ready bit, it * returns the current state of R_TDO */ static int qib_r_wait_for_rdy(struct qib_devdata *dd) { u64 val; int timeout; for (timeout = 0; timeout < 100 ; ++timeout) { val = qib_read_kreg32(dd, kr_r_access); if (val & R_RDY) return (val >> R_TDO_LSB) & 1; } return -1; } static int qib_r_shift(struct qib_devdata *dd, int bisten, int len, u8 *inp, u8 *outp) { u64 valbase, val; int ret, pos; valbase = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_SHIFT << R_OPCODE_LSB); ret = qib_r_wait_for_rdy(dd); if (ret < 0) goto bail; for (pos = 0; pos < len; ++pos) { val = valbase; if (outp) { outp[pos >> 3] &= ~(1 << (pos & 7)); outp[pos >> 3] |= (ret << (pos & 7)); } if (inp) { int tdi = inp[pos >> 3] >> (pos & 7); val |= ((tdi & 1) << R_TDI_LSB); } qib_write_kreg(dd, kr_r_access, val); qib_read_kreg32(dd, kr_scratch); ret = qib_r_wait_for_rdy(dd); if (ret < 0) break; } /* Restore to NOP between operations. */ val = SJA_EN | (bisten << BISTEN_LSB); qib_write_kreg(dd, kr_r_access, val); qib_read_kreg32(dd, kr_scratch); ret = qib_r_wait_for_rdy(dd); if (ret >= 0) ret = pos; bail: return ret; } static int qib_r_update(struct qib_devdata *dd, int bisten) { u64 val; int ret; val = SJA_EN | (bisten << BISTEN_LSB) | (R_OP_UPDATE << R_OPCODE_LSB); ret = qib_r_wait_for_rdy(dd); if (ret >= 0) { qib_write_kreg(dd, kr_r_access, val); qib_read_kreg32(dd, kr_scratch); } return ret; } #define BISTEN_PORT_SEL 15 #define LEN_PORT_SEL 625 #define BISTEN_AT 17 #define LEN_AT 156 #define BISTEN_ETM 16 #define LEN_ETM 632 #define BIT2BYTE(x) (((x) + BITS_PER_BYTE - 1) / BITS_PER_BYTE) /* these are common for all IB port use cases. */ static u8 reset_at[BIT2BYTE(LEN_AT)] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, }; static u8 reset_atetm[BIT2BYTE(LEN_ETM)] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xe3, 0x81, 0x73, 0x3c, 0x70, 0x8e, 0x07, 0xce, 0xf1, 0xc0, 0x39, 0x1e, 0x38, 0xc7, 0x03, 0xe7, 0x78, 0xe0, 0x1c, 0x0f, 0x9c, 0x7f, 0x80, 0x73, 0x0f, 0x70, 0xde, 0x01, 0xce, 0x39, 0xc0, 0xf9, 0x06, 0x38, 0xd7, 0x00, 0xe7, 0x19, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, }; static u8 at[BIT2BYTE(LEN_AT)] = { 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, }; /* used for IB1 or IB2, only one in use */ static u8 atetm_1port[BIT2BYTE(LEN_ETM)] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0xf2, 0x80, 0x83, 0x1e, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xc8, 0x03, 0x07, 0x7b, 0xa0, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x4b, 0x00, 0x00, 0x00, }; /* used when both IB1 and IB2 are in use */ static u8 atetm_2port[BIT2BYTE(LEN_ETM)] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x79, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x80, 0x83, 0x1e, 0x38, 0xe0, 0x03, 0x05, 0x7b, 0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xa2, 0x0f, 0x50, 0xf4, 0x41, 0x00, 0x18, 0x78, 0xd1, 0x07, 0x02, 0x7c, 0x80, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x3e, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x64, 0x00, 0x00, 0x00, }; /* used when only IB1 is in use */ static u8 portsel_port1[BIT2BYTE(LEN_PORT_SEL)] = { 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x78, 0x78, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, }; /* used when only IB2 is in use */ static u8 portsel_port2[BIT2BYTE(LEN_PORT_SEL)] = { 0x32, 0x65, 0xa4, 0x7b, 0x10, 0x98, 0xdc, 0xfe, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x73, 0x32, 0x32, 0x32, 0x32, 0x32, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x78, 0x78, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x39, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x74, 0x32, 0x32, 0x32, 0x32, 0x32, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x3a, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, }; /* used when both IB1 and IB2 are in use */ static u8 portsel_2port[BIT2BYTE(LEN_PORT_SEL)] = { 0x32, 0xba, 0x54, 0x76, 0x10, 0x98, 0xdc, 0xfe, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x73, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x13, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x74, 0x32, 0x32, 0x32, 0x32, 0x32, 0x14, 0x14, 0x14, 0x14, 0x14, 0x3a, 0x3a, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x9f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, }; /* * Do setup to properly handle IB link recovery; if port is zero, we * are initializing to cover both ports; otherwise we are initializing * to cover a single port card, or the port has reached INIT and we may * need to switch coverage types. */ static void setup_7322_link_recovery(struct qib_pportdata *ppd, u32 both) { u8 *portsel, *etm; struct qib_devdata *dd = ppd->dd; if (!ppd->dd->cspec->r1) return; if (!both) { dd->cspec->recovery_ports_initted++; ppd->cpspec->recovery_init = 1; } if (!both && dd->cspec->recovery_ports_initted == 1) { portsel = ppd->port == 1 ? portsel_port1 : portsel_port2; etm = atetm_1port; } else { portsel = portsel_2port; etm = atetm_2port; } if (qib_r_grab(dd) < 0 || qib_r_shift(dd, BISTEN_ETM, LEN_ETM, reset_atetm, NULL) < 0 || qib_r_update(dd, BISTEN_ETM) < 0 || qib_r_shift(dd, BISTEN_AT, LEN_AT, reset_at, NULL) < 0 || qib_r_update(dd, BISTEN_AT) < 0 || qib_r_shift(dd, BISTEN_PORT_SEL, LEN_PORT_SEL, portsel, NULL) < 0 || qib_r_update(dd, BISTEN_PORT_SEL) < 0 || qib_r_shift(dd, BISTEN_AT, LEN_AT, at, NULL) < 0 || qib_r_update(dd, BISTEN_AT) < 0 || qib_r_shift(dd, BISTEN_ETM, LEN_ETM, etm, NULL) < 0 || qib_r_update(dd, BISTEN_ETM) < 0) qib_dev_err(dd, "Failed IB link recovery setup\n"); } static void check_7322_rxe_status(struct qib_pportdata *ppd) { struct qib_devdata *dd = ppd->dd; u64 fmask; if (dd->cspec->recovery_ports_initted != 1) return; /* rest doesn't apply to dualport */ qib_write_kreg(dd, kr_control, dd->control | SYM_MASK(Control, FreezeMode)); (void)qib_read_kreg64(dd, kr_scratch); udelay(3); /* ibcreset asserted 400ns, be sure that's over */ fmask = qib_read_kreg64(dd, kr_act_fmask); if (!fmask) { /* * require a powercycle before we'll work again, and make * sure we get no more interrupts, and don't turn off * freeze. */ ppd->dd->cspec->stay_in_freeze = 1; qib_7322_set_intr_state(ppd->dd, 0); qib_write_kreg(dd, kr_fmask, 0ULL); qib_dev_err(dd, "HCA unusable until powercycled\n"); return; /* eventually reset */ } qib_write_kreg(ppd->dd, kr_hwerrclear, SYM_MASK(HwErrClear, IBSerdesPClkNotDetectClear_1)); /* don't do the full clear_freeze(), not needed for this */ qib_write_kreg(dd, kr_control, dd->control); qib_read_kreg32(dd, kr_scratch); /* take IBC out of reset */ if (ppd->link_speed_supported) { ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, IBStatIntReductionEn); qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a); qib_read_kreg32(dd, kr_scratch); if (ppd->lflags & QIBL_IB_LINK_DISABLED) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); } }