/* * drivers/input/serio/gscps2.c * * Copyright (c) 2004-2006 Helge Deller * Copyright (c) 2002 Laurent Canet * Copyright (c) 2002 Thibaut Varene * * Pieces of code based on linux-2.4's hp_mouse.c & hp_keyb.c * Copyright (c) 1999 Alex deVries * Copyright (c) 1999-2000 Philipp Rumpf * Copyright (c) 2000 Xavier Debacker * Copyright (c) 2000-2001 Thomas Marteau * * HP GSC PS/2 port driver, found in PA/RISC Workstations * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * TODO: * - Dino testing (did HP ever shipped a machine on which this port * was usable/enabled ?) */ #include #include #include #include #include #include #include #include #include #include #include #include MODULE_AUTHOR("Laurent Canet , Thibaut Varene , Helge Deller "); MODULE_DESCRIPTION("HP GSC PS2 port driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(parisc, gscps2_device_tbl); #define PFX "gscps2.c: " /* * Driver constants */ /* various constants */ #define ENABLE 1 #define DISABLE 0 #define GSC_DINO_OFFSET 0x0800 /* offset for DINO controller versus LASI one */ /* PS/2 IO port offsets */ #define GSC_ID 0x00 /* device ID offset (see: GSC_ID_XXX) */ #define GSC_RESET 0x00 /* reset port offset */ #define GSC_RCVDATA 0x04 /* receive port offset */ #define GSC_XMTDATA 0x04 /* transmit port offset */ #define GSC_CONTROL 0x08 /* see: Control register bits */ #define GSC_STATUS 0x0C /* see: Status register bits */ /* Control register bits */ #define GSC_CTRL_ENBL 0x01 /* enable interface */ #define GSC_CTRL_LPBXR 0x02 /* loopback operation */ #define GSC_CTRL_DIAG 0x20 /* directly control clock/data line */ #define GSC_CTRL_DATDIR 0x40 /* data line direct control */ #define GSC_CTRL_CLKDIR 0x80 /* clock line direct control */ /* Status register bits */ #define GSC_STAT_RBNE 0x01 /* Receive Buffer Not Empty */ #define GSC_STAT_TBNE 0x02 /* Transmit Buffer Not Empty */ #define GSC_STAT_TERR 0x04 /* Timeout Error */ #define GSC_STAT_PERR 0x08 /* Parity Error */ #define GSC_STAT_CMPINTR 0x10 /* Composite Interrupt = irq on any port */ #define GSC_STAT_DATSHD 0x40 /* Data Line Shadow */ #define GSC_STAT_CLKSHD 0x80 /* Clock Line Shadow */ /* IDs returned by GSC_ID port register */ #define GSC_ID_KEYBOARD 0 /* device ID values */ #define GSC_ID_MOUSE 1 static irqreturn_t gscps2_interrupt(int irq, void *dev); #define BUFFER_SIZE 0x0f /* GSC PS/2 port device struct */ struct gscps2port { struct list_head node; struct parisc_device *padev; struct serio *port; spinlock_t lock; char *addr; u8 act, append; /* position in buffer[] */ struct { u8 data; u8 str; } buffer[BUFFER_SIZE+1]; int id; }; /* * Various HW level routines */ #define gscps2_readb_input(x) readb((x)+GSC_RCVDATA) #define gscps2_readb_control(x) readb((x)+GSC_CONTROL) #define gscps2_readb_status(x) readb((x)+GSC_STATUS) #define gscps2_writeb_control(x, y) writeb((x), (y)+GSC_CONTROL) /* * wait_TBE() - wait for Transmit Buffer Empty */ static int wait_TBE(char *addr) { int timeout = 25000; /* device is expected to react within 250 msec */ while (gscps2_readb_status(addr) & GSC_STAT_TBNE) { if (!--timeout) return 0; /* This should not happen */ udelay(10); } return 1; } /* * gscps2_flush() - flush the receive buffer */ static void gscps2_flush(struct gscps2port *ps2port) { while (gscps2_readb_status(ps2port->addr) & GSC_STAT_RBNE) gscps2_readb_input(ps2port->addr); ps2port->act = ps2port->append = 0; } /* * gscps2_writeb_output() - write a byte to the port * * returns 1 on sucess, 0 on error */ static inline int gscps2_writeb_output(struct gscps2port *ps2port, u8 data) { unsigned long flags; char *addr = ps2port->addr; if (!wait_TBE(addr)) { printk(KERN_DEBUG PFX "timeout - could not write byte %#x\n", data); return 0; } while (gscps2_readb_status(ps2port->addr) & GSC_STAT_RBNE) /* wait */; spin_lock_irqsave(&ps2port->lock, flags); writeb(data, addr+GSC_XMTDATA); spin_unlock_irqrestore(&ps2port->lock, flags); /* this is ugly, but due to timing of the port it seems to be necessary. */ mdelay(6); /* make sure any received data is returned as fast as possible */ /* this is important e.g. when we set the LEDs on the keyboard */ gscps2_interrupt(0, NULL); return 1; } /* * gscps2_enable() - enables or disables the port */ static void gscps2_enable(struct gscps2port *ps2port, int enable) { unsigned long flags; u8 data; /* now enable/disable the port */ spin_lock_irqsave(&ps2port->lock, flags); gscps2_flush(ps2port); data = gscps2_readb_control(ps2port->addr); if (enable) data |= GSC_CTRL_ENBL; else data &= ~GSC_CTRL_ENBL; gscps2_writeb_control(data, ps2port->addr); spin_unlock_irqrestore(&ps2port->lock, flags); wait_TBE(ps2port->addr); gscps2_flush(ps2port); } /* * gscps2_reset() - resets the PS/2 port */ static void gscps2_reset(struct gscps2port *ps2port) { char *addr = ps2port->addr; unsigned long flags; /* reset the interface */ spin_lock_irqsave(&ps2port->lock, flags); gscps2_flush(ps2port); writeb(0xff, addr+GSC_RESET); gscps2_flush(ps2port); spin_unlock_irqrestore(&ps2port->lock, flags); } static LIST_HEAD(ps2port_list); /** * gscps2_interrupt() - Interruption service routine * * This function reads received PS/2 bytes and processes them on * all interfaces. * The problematic part here is, that the keyboard and mouse PS/2 port * share the same interrupt and it's not possible to send data if any * one of them holds input data. To solve this problem we try to receive * the data as fast as possible and handle the reporting to the upper layer * later. */ static irqreturn_t gscps2_interrupt(int irq, void *dev) { struct gscps2port *ps2port; list_for_each_entry(ps2port, &ps2port_list, node) { unsigned long flags; spin_lock_irqsave(&ps2port->lock, flags); while ( (ps2port->buffer[ps2port->append].str = gscps2_readb_status(ps2port->addr)) & GSC_STAT_RBNE ) { ps2port->buffer[ps2port->append].data = gscps2_readb_input(ps2port->addr); ps2port->append = ((ps2port->append+1) & BUFFER_SIZE); } spin_unlock_irqrestore(&ps2port->lock, flags); } /* list_for_each_entry */ /* all data was read from the ports - now report the data to upper layer */ list_for_each_entry(ps2port, &ps2port_list, node) { while (ps2port->act != ps2port->append) { unsigned int rxflags; u8 data, status; /* Did new data arrived while we read existing data ? If yes, exit now and let the new irq handler start over again */ if (gscps2_readb_status(ps2port->addr) & GSC_STAT_CMPINTR) return IRQ_HANDLED; status = ps2port->buffer[ps2port->act].str; data = ps2port->buffer[ps2port->act].data; ps2port->act = ((ps2port->act+1) & BUFFER_SIZE); rxflags = ((status & GSC_STAT_TERR) ? SERIO_TIMEOUT : 0 ) | ((status & GSC_STAT_PERR) ? SERIO_PARITY : 0 ); serio_interrupt(ps2port->port, data, rxflags); } /* while() */ } /* list_for_each_entry */ return IRQ_HANDLED; } /* * gscps2_write() - send a byte out through the aux interface. */ static int gscps2_write(struct serio *port, unsigned char data) { struct gscps2port *ps2port = port->port_data; if (!gscps2_writeb_output(ps2port, data)) { printk(KERN_DEBUG PFX "sending byte %#x failed.\n", data); return -1; } return 0; } /* * gscps2_open() is called when a port is opened by the higher layer. * It resets and enables the port. */ static int gscps2_open(struct serio *port) { struct gscps2port *ps2port = port->port_data; gscps2_reset(ps2port); /* enable it */ gscps2_enable(ps2port, ENABLE); gscps2_interrupt(0, NULL); return 0; } /* * gscps2_close() disables the port */ static void gscps2_close(struct serio *port) { struct gscps2port *ps2port = port->port_data; gscps2_enable(ps2port, DISABLE); } /** * gscps2_probe() - Probes PS2 devices * @return: success/error report */ static int __init gscps2_probe(struct parisc_device *dev) { struct gscps2port *ps2port; struct serio *serio; unsigned long hpa = dev->hpa.start; int ret; if (!dev->irq) return -ENODEV; /* Offset for DINO PS/2. Works with LASI even */ if (dev->id.sversion == 0x96) hpa += GSC_DINO_OFFSET; ps2port = kzalloc(sizeof(struct gscps2port), GFP_KERNEL); serio = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!ps2port || !serio) { ret = -ENOMEM; goto fail_nomem; } dev_set_drvdata(&dev->dev, ps2port); ps2port->port = serio; ps2port->padev = dev; ps2port->addr = ioremap_nocache(hpa, GSC_STATUS + 4); spin_lock_init(&ps2port->lock); gscps2_reset(ps2port); ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f; snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s", (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse"); strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys)); serio->id.type = SERIO_8042; serio->write = gscps2_write; serio->open = gscps2_open; serio->close = gscps2_close; serio->port_data = ps2port; serio->dev.parent = &dev->dev; ret = -EBUSY; if (request_irq(dev->irq, gscps2_interrupt, IRQF_SHARED, ps2port->port->name, ps2port)) goto fail_miserably; if (ps2port->id != GSC_ID_KEYBOARD && ps2port->id != GSC_ID_MOUSE) { printk(KERN_WARNING PFX "Unsupported PS/2 port at 0x%08lx (id=%d) ignored\n", hpa, ps2port->id); ret = -ENODEV; goto fail; } #if 0 if (!request_mem_region(hpa, GSC_STATUS + 4, ps2port->port.name)) goto fail; #endif printk(KERN_INFO "serio: %s port at 0x%p irq %d @ %s\n", ps2port->port->name, ps2port->addr, ps2port->padev->irq, ps2port->port->phys); serio_register_port(ps2port->port); list_add_tail(&ps2port->node, &ps2port_list); return 0; fail: free_irq(dev->irq, ps2port); fail_miserably: iounmap(ps2port->addr); release_mem_region(dev->hpa.start, GSC_STATUS + 4); fail_nomem: kfree(ps2port); kfree(serio); return ret; } /** * gscps2_remove() - Removes PS2 devices * @return: success/error report */ static int __devexit gscps2_remove(struct parisc_device *dev) { struct gscps2port *ps2port = dev_get_drvdata(&dev->dev); serio_unregister_port(ps2port->port); free_irq(dev->irq, ps2port); gscps2_flush(ps2port); list_del(&ps2port->node); iounmap(ps2port->addr); #if 0 release_mem_region(dev->hpa, GSC_STATUS + 4); #endif dev_set_drvdata(&dev->dev, NULL); kfree(ps2port); return 0; } static struct parisc_device_id gscps2_device_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00084 }, /* LASI PS/2 */ #ifdef DINO_TESTED { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00096 }, /* DINO PS/2 */ #endif { 0, } /* 0 terminated list */ }; static struct parisc_driver parisc_ps2_driver = { .name = "gsc_ps2", .id_table = gscps2_device_tbl, .probe = gscps2_probe, .remove = gscps2_remove, }; static int __init gscps2_init(void) { register_parisc_driver(&parisc_ps2_driver); return 0; } static void __exit gscps2_exit(void) { unregister_parisc_driver(&parisc_ps2_driver); } module_init(gscps2_init); module_exit(gscps2_exit);