menuconfig CAN_SJA1000 tristate "Philips/NXP SJA1000 devices" depends on HAS_IOMEM if CAN_SJA1000 config CAN_SJA1000_ISA tristate "ISA Bus based legacy SJA1000 driver" ---help--- This driver adds legacy support for SJA1000 chips connected to the ISA bus using I/O port, memory mapped or indirect access. config CAN_SJA1000_PLATFORM tristate "Generic Platform Bus based SJA1000 driver" ---help--- This driver adds support for the SJA1000 chips connected to the "platform bus" (Linux abstraction for directly to the processor attached devices). Which can be found on various boards from Phytec (http://www.phytec.de) like the PCM027, PCM038. It also provides the OpenFirmware "platform bus" found on embedded systems with OpenFirmware bindings, e.g. if you have a PowerPC based system you may want to enable this option. config CAN_EMS_PCMCIA tristate "EMS CPC-CARD Card" depends on PCMCIA ---help--- This driver is for the one or two channel CPC-CARD cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). config CAN_EMS_PCI tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" depends on PCI ---help--- This driver is for the one, two or four channel CPC-PCI, CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). config CAN_PEAK_PCMCIA tristate "PEAK PCAN-PC Card" depends on PCMCIA depends on HAS_IOPORT_MAP ---help--- This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels) from PEAK-System (http://www.peak-system.com). To compile this driver as a module, choose M here: the module will be called peak_pcmcia. config CAN_PEAK_PCI tristate "PEAK PCAN-PCI/PCIe/miniPCI Cards" depends on PCI ---help--- This driver is for the PCAN-PCI/PCIe/miniPCI cards (1, 2, 3 or 4 channels) from PEAK-System Technik (http://www.peak-system.com). config CAN_PEAK_PCIEC bool "PEAK PCAN-ExpressCard Cards" depends on CAN_PEAK_PCI select I2C select I2C_ALGOBIT default y ---help--- Say Y here if you want to use a PCAN-ExpressCard from PEAK-System Technik. This will also automatically select I2C and I2C_ALGO configuration options. config CAN_KVASER_PCI tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" depends on PCI ---help--- This driver is for the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com). config CAN_PLX_PCI tristate "PLX90xx PCI-bridge based Cards" depends on PCI ---help--- This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/) - esd CAN-PCI/PMC/266 - esd CAN-PCIe/2000 - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) - IXXAT Automation PC-I 04/PCI card (http://www.ixxat.com/) - Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card (http://www.connecttech.com) - ASEM CAN raw - 2 isolated CAN channels (www.asem.it) config CAN_TSCAN1 tristate "TS-CAN1 PC104 boards" depends on ISA help This driver is for Technologic Systems' TSCAN-1 PC104 boards. http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1 The driver supports multiple boards and automatically configures them: PLD IO base addresses are read from jumpers JP1 and JP2, IRQ numbers are read from jumpers JP4 and JP5, SJA1000 IO base addresses are chosen heuristically (first that works). endif