menu "CAN USB interfaces" depends on USB config CAN_8DEV_USB tristate "8 devices USB2CAN interface" ---help--- This driver supports the USB2CAN interface from 8 devices (http://www.8devices.com). config CAN_EMS_USB tristate "EMS CPC-USB/ARM7 CAN/USB interface" ---help--- This driver is for the one channel CPC-USB/ARM7 CAN/USB interface from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). config CAN_ESD_USB2 tristate "ESD USB/2 CAN/USB interface" ---help--- This driver supports the CAN-USB/2 interface from esd electronic system design gmbh (http://www.esd.eu). config CAN_GS_USB tristate "Geschwister Schneider UG interfaces" ---help--- This driver supports the Geschwister Schneider and bytewerk.org candleLight USB CAN interfaces USB/CAN devices If unsure choose N, choose Y for built in support, M to compile as module (module will be named: gs_usb). config CAN_KVASER_USB tristate "Kvaser CAN/USB interface" ---help--- This driver adds support for Kvaser CAN/USB devices like Kvaser Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS. The driver provides support for the following devices: - Kvaser Leaf Light - Kvaser Leaf Professional HS - Kvaser Leaf SemiPro HS - Kvaser Leaf Professional LS - Kvaser Leaf Professional SWC - Kvaser Leaf Professional LIN - Kvaser Leaf SemiPro LS - Kvaser Leaf SemiPro SWC - Kvaser Memorator II HS/HS - Kvaser USBcan Professional HS/HS - Kvaser Leaf Light GI - Kvaser Leaf Professional HS (OBD-II connector) - Kvaser Memorator Professional HS/LS - Kvaser Leaf Light "China" - Kvaser BlackBird SemiPro - Kvaser USBcan R - Kvaser Leaf Light v2 - Kvaser Mini PCI Express HS - Kvaser Mini PCI Express 2xHS - Kvaser USBcan Light 2xHS - Kvaser USBcan II HS/HS - Kvaser USBcan II HS/LS - Kvaser USBcan Rugged ("USBcan Rev B") - Kvaser Memorator HS/HS - Kvaser Memorator HS/LS - Scania VCI2 (if you have the Kvaser logo on top) - Kvaser BlackBird v2 - Kvaser Leaf Pro HS v2 - Kvaser Hybrid 2xCAN/LIN - Kvaser Hybrid Pro 2xCAN/LIN - Kvaser Memorator 2xHS v2 - Kvaser Memorator Pro 2xHS v2 - Kvaser Memorator Pro 5xHS - Kvaser USBcan Light 4xHS - Kvaser USBcan Pro 2xHS v2 - Kvaser USBcan Pro 5xHS - ATI Memorator Pro 2xHS v2 - ATI USBcan Pro 2xHS v2 If unsure, say N. To compile this driver as a module, choose M here: the module will be called kvaser_usb. config CAN_MCBA_USB tristate "Microchip CAN BUS Analyzer interface" ---help--- This driver supports the CAN BUS Analyzer interface from Microchip (http://www.microchip.com/development-tools/). config CAN_PEAK_USB tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" ---help--- This driver supports the PEAK-System Technik USB adapters that enable access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD standards, that is: PCAN-USB single CAN 2.0b channel USB adapter PCAN-USB Pro dual CAN 2.0b channels USB adapter PCAN-USB FD single CAN-FD channel USB adapter PCAN-USB Pro FD dual CAN-FD channels USB adapter PCAN-Chip USB CAN-FD to USB stamp module PCAN-USB X6 6 CAN-FD channels USB adapter (see also http://www.peak-system.com). config CAN_MCBA_USB tristate "Microchip CAN BUS Analyzer interface" ---help--- This driver supports the CAN BUS Analyzer interface from Microchip (http://www.microchip.com/development-tools/). config CAN_UCAN tristate "Theobroma Systems UCAN interface" ---help--- This driver supports the Theobroma Systems UCAN USB-CAN interface. The UCAN driver supports the microcontroller-based USB/CAN adapters from Theobroma Systems. There are two form-factors that run essentially the same firmware: * Seal: standalone USB stick https://www.theobroma-systems.com/seal) * Mule: integrated on the PCB of various System-on-Modules from Theobroma Systems like the A31-µQ7 and the RK3399-Q7 (https://www.theobroma-systems.com/rk3399-q7) endmenu