/* * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet * driver for Linux. * * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ /* * This file should not be included directly. Include t4vf_common.h instead. */ #ifndef __CXGB4VF_ADAPTER_H__ #define __CXGB4VF_ADAPTER_H__ #include #include #include #include #include #include "../cxgb4/t4_hw.h" /* * Constants of the implementation. */ enum { MAX_NPORTS = 1, /* max # of "ports" */ MAX_PORT_QSETS = 8, /* max # of Queue Sets / "port" */ MAX_ETH_QSETS = MAX_NPORTS*MAX_PORT_QSETS, /* * MSI-X interrupt index usage. */ MSIX_FW = 0, /* MSI-X index for firmware Q */ MSIX_NIQFLINT = 1, /* MSI-X index base for Ingress Qs */ MSIX_EXTRAS = 1, MSIX_ENTRIES = MAX_ETH_QSETS + MSIX_EXTRAS, /* * The maximum number of Ingress and Egress Queues is determined by * the maximum number of "Queue Sets" which we support plus any * ancillary queues. Each "Queue Set" requires one Ingress Queue * for RX Packet Ingress Event notifications and two Egress Queues for * a Free List and an Ethernet TX list. */ INGQ_EXTRAS = 2, /* firmware event queue and */ /* forwarded interrupts */ MAX_INGQ = MAX_ETH_QSETS+INGQ_EXTRAS, MAX_EGRQ = MAX_ETH_QSETS*2, }; /* * Forward structure definition references. */ struct adapter; struct sge_eth_rxq; struct sge_rspq; /* * Per-"port" information. This is really per-Virtual Interface information * but the use of the "port" nomanclature makes it easier to go back and forth * between the PF and VF drivers ... */ struct port_info { struct adapter *adapter; /* our adapter */ struct vlan_group *vlan_grp; /* out VLAN group */ u16 viid; /* virtual interface ID */ s16 xact_addr_filt; /* index of our MAC address filter */ u16 rss_size; /* size of VI's RSS table slice */ u8 pidx; /* index into adapter port[] */ u8 port_id; /* physical port ID */ u8 rx_offload; /* CSO, etc. */ u8 nqsets; /* # of "Queue Sets" */ u8 first_qset; /* index of first "Queue Set" */ struct link_config link_cfg; /* physical port configuration */ }; /* port_info.rx_offload flags */ enum { RX_CSO = 1 << 0, }; /* * Scatter Gather Engine resources for the "adapter". Our ingress and egress * queues are organized into "Queue Sets" with one ingress and one egress * queue per Queue Set. These Queue Sets are aportionable between the "ports" * (Virtual Interfaces). One extra ingress queue is used to receive * asynchronous messages from the firmware. Note that the "Queue IDs" that we * use here are really "Relative Queue IDs" which are returned as part of the * firmware command to allocate queues. These queue IDs are relative to the * absolute Queue ID base of the section of the Queue ID space allocated to * the PF/VF. */ /* * SGE free-list queue state. */ struct rx_sw_desc; struct sge_fl { unsigned int avail; /* # of available RX buffers */ unsigned int pend_cred; /* new buffers since last FL DB ring */ unsigned int cidx; /* consumer index */ unsigned int pidx; /* producer index */ unsigned long alloc_failed; /* # of buffer allocation failures */ unsigned long large_alloc_failed; unsigned long starving; /* # of times FL was found starving */ /* * Write-once/infrequently fields. * ------------------------------- */ unsigned int cntxt_id; /* SGE relative QID for the free list */ unsigned int abs_id; /* SGE absolute QID for the free list */ unsigned int size; /* capacity of free list */ struct rx_sw_desc *sdesc; /* address of SW RX descriptor ring */ __be64 *desc; /* address of HW RX descriptor ring */ dma_addr_t addr; /* PCI bus address of hardware ring */ }; /* * An ingress packet gather list. */ struct pkt_gl { skb_frag_t frags[MAX_SKB_FRAGS]; void *va; /* virtual address of first byte */ unsigned int nfrags; /* # of fragments */ unsigned int tot_len; /* total length of fragments */ }; typedef int (*rspq_handler_t)(struct sge_rspq *, const __be64 *, const struct pkt_gl *); /* * State for an SGE Response Queue. */ struct sge_rspq { struct napi_struct napi; /* NAPI scheduling control */ const __be64 *cur_desc; /* current descriptor in queue */ unsigned int cidx; /* consumer index */ u8 gen; /* current generation bit */ u8 next_intr_params; /* holdoff params for next interrupt */ int offset; /* offset into current FL buffer */ unsigned int unhandled_irqs; /* bogus interrupts */ /* * Write-once/infrequently fields. * ------------------------------- */ u8 intr_params; /* interrupt holdoff parameters */ u8 pktcnt_idx; /* interrupt packet threshold */ u8 idx; /* queue index within its group */ u16 cntxt_id; /* SGE rel QID for the response Q */ u16 abs_id; /* SGE abs QID for the response Q */ __be64 *desc; /* address of hardware response ring */ dma_addr_t phys_addr; /* PCI bus address of ring */ unsigned int iqe_len; /* entry size */ unsigned int size; /* capcity of response Q */ struct adapter *adapter; /* our adapter */ struct net_device *netdev; /* associated net device */ rspq_handler_t handler; /* the handler for this response Q */ }; /* * Ethernet queue statistics */ struct sge_eth_stats { unsigned long pkts; /* # of ethernet packets */ unsigned long lro_pkts; /* # of LRO super packets */ unsigned long lro_merged; /* # of wire packets merged by LRO */ unsigned long rx_cso; /* # of Rx checksum offloads */ unsigned long vlan_ex; /* # of Rx VLAN extractions */ unsigned long rx_drops; /* # of packets dropped due to no mem */ }; /* * State for an Ethernet Receive Queue. */ struct sge_eth_rxq { struct sge_rspq rspq; /* Response Queue */ struct sge_fl fl; /* Free List */ struct sge_eth_stats stats; /* receive statistics */ }; /* * SGE Transmit Queue state. This contains all of the resources associated * with the hardware status of a TX Queue which is a circular ring of hardware * TX Descriptors. For convenience, it also contains a pointer to a parallel * "Software Descriptor" array but we don't know anything about it here other * than its type name. */ struct tx_desc { /* * Egress Queues are measured in units of SGE_EQ_IDXSIZE by the * hardware: Sizes, Producer and Consumer indices, etc. */ __be64 flit[SGE_EQ_IDXSIZE/sizeof(__be64)]; }; struct tx_sw_desc; struct sge_txq { unsigned int in_use; /* # of in-use TX descriptors */ unsigned int size; /* # of descriptors */ unsigned int cidx; /* SW consumer index */ unsigned int pidx; /* producer index */ unsigned long stops; /* # of times queue has been stopped */ unsigned long restarts; /* # of queue restarts */ /* * Write-once/infrequently fields. * ------------------------------- */ unsigned int cntxt_id; /* SGE relative QID for the TX Q */ unsigned int abs_id; /* SGE absolute QID for the TX Q */ struct tx_desc *desc; /* address of HW TX descriptor ring */ struct tx_sw_desc *sdesc; /* address of SW TX descriptor ring */ struct sge_qstat *stat; /* queue status entry */ dma_addr_t phys_addr; /* PCI bus address of hardware ring */ }; /* * State for an Ethernet Transmit Queue. */ struct sge_eth_txq { struct sge_txq q; /* SGE TX Queue */ struct netdev_queue *txq; /* associated netdev TX queue */ unsigned long tso; /* # of TSO requests */ unsigned long tx_cso; /* # of TX checksum offloads */ unsigned long vlan_ins; /* # of TX VLAN insertions */ unsigned long mapping_err; /* # of I/O MMU packet mapping errors */ }; /* * The complete set of Scatter/Gather Engine resources. */ struct sge { /* * Our "Queue Sets" ... */ struct sge_eth_txq ethtxq[MAX_ETH_QSETS]; struct sge_eth_rxq ethrxq[MAX_ETH_QSETS]; /* * Extra ingress queues for asynchronous firmware events and * forwarded interrupts (when in MSI mode). */ struct sge_rspq fw_evtq ____cacheline_aligned_in_smp; struct sge_rspq intrq ____cacheline_aligned_in_smp; spinlock_t intrq_lock; /* * State for managing "starving Free Lists" -- Free Lists which have * fallen below a certain threshold of buffers available to the * hardware and attempts to refill them up to that threshold have * failed. We have a regular "slow tick" timer process which will * make periodic attempts to refill these starving Free Lists ... */ DECLARE_BITMAP(starving_fl, MAX_EGRQ); struct timer_list rx_timer; /* * State for cleaning up completed TX descriptors. */ struct timer_list tx_timer; /* * Write-once/infrequently fields. * ------------------------------- */ u16 max_ethqsets; /* # of available Ethernet queue sets */ u16 ethqsets; /* # of active Ethernet queue sets */ u16 ethtxq_rover; /* Tx queue to clean up next */ u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */ u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */ /* * Reverse maps from Absolute Queue IDs to associated queue pointers. * The absolute Queue IDs are in a compact range which start at a * [potentially large] Base Queue ID. We perform the reverse map by * first converting the Absolute Queue ID into a Relative Queue ID by * subtracting off the Base Queue ID and then use a Relative Queue ID * indexed table to get the pointer to the corresponding software * queue structure. */ unsigned int egr_base; unsigned int ingr_base; void *egr_map[MAX_EGRQ]; struct sge_rspq *ingr_map[MAX_INGQ]; }; /* * Utility macros to convert Absolute- to Relative-Queue indices and Egress- * and Ingress-Queues. The EQ_MAP() and IQ_MAP() macros which provide * pointers to Ingress- and Egress-Queues can be used as both L- and R-values */ #define EQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->egr_base)) #define IQ_IDX(s, abs_id) ((unsigned int)((abs_id) - (s)->ingr_base)) #define EQ_MAP(s, abs_id) ((s)->egr_map[EQ_IDX(s, abs_id)]) #define IQ_MAP(s, abs_id) ((s)->ingr_map[IQ_IDX(s, abs_id)]) /* * Macro to iterate across Queue Sets ("rxq" is a historic misnomer). */ #define for_each_ethrxq(sge, iter) \ for (iter = 0; iter < (sge)->ethqsets; iter++) /* * Per-"adapter" (Virtual Function) information. */ struct adapter { /* PCI resources */ void __iomem *regs; struct pci_dev *pdev; struct device *pdev_dev; /* "adapter" resources */ unsigned long registered_device_map; unsigned long open_device_map; unsigned long flags; struct adapter_params params; /* queue and interrupt resources */ struct { unsigned short vec; char desc[22]; } msix_info[MSIX_ENTRIES]; struct sge sge; /* Linux network device resources */ struct net_device *port[MAX_NPORTS]; const char *name; unsigned int msg_enable; /* debugfs resources */ struct dentry *debugfs_root; /* various locks */ spinlock_t stats_lock; }; enum { /* adapter flags */ FULL_INIT_DONE = (1UL << 0), USING_MSI = (1UL << 1), USING_MSIX = (1UL << 2), QUEUES_BOUND = (1UL << 3), }; /* * The following register read/write routine definitions are required by * the common code. */ /** * t4_read_reg - read a HW register * @adapter: the adapter * @reg_addr: the register address * * Returns the 32-bit value of the given HW register. */ static inline u32 t4_read_reg(struct adapter *adapter, u32 reg_addr) { return readl(adapter->regs + reg_addr); } /** * t4_write_reg - write a HW register * @adapter: the adapter * @reg_addr: the register address * @val: the value to write * * Write a 32-bit value into the given HW register. */ static inline void t4_write_reg(struct adapter *adapter, u32 reg_addr, u32 val) { writel(val, adapter->regs + reg_addr); } #ifndef readq static inline u64 readq(const volatile void __iomem *addr) { return readl(addr) + ((u64)readl(addr + 4) << 32); } static inline void writeq(u64 val, volatile void __iomem *addr) { writel(val, addr); writel(val >> 32, addr + 4); } #endif /** * t4_read_reg64 - read a 64-bit HW register * @adapter: the adapter * @reg_addr: the register address * * Returns the 64-bit value of the given HW register. */ static inline u64 t4_read_reg64(struct adapter *adapter, u32 reg_addr) { return readq(adapter->regs + reg_addr); } /** * t4_write_reg64 - write a 64-bit HW register * @adapter: the adapter * @reg_addr: the register address * @val: the value to write * * Write a 64-bit value into the given HW register. */ static inline void t4_write_reg64(struct adapter *adapter, u32 reg_addr, u64 val) { writeq(val, adapter->regs + reg_addr); } /** * port_name - return the string name of a port * @adapter: the adapter * @pidx: the port index * * Return the string name of the selected port. */ static inline const char *port_name(struct adapter *adapter, int pidx) { return adapter->port[pidx]->name; } /** * t4_os_set_hw_addr - store a port's MAC address in SW * @adapter: the adapter * @pidx: the port index * @hw_addr: the Ethernet address * * Store the Ethernet address of the given port in SW. Called by the common * code when it retrieves a port's Ethernet address from EEPROM. */ static inline void t4_os_set_hw_addr(struct adapter *adapter, int pidx, u8 hw_addr[]) { memcpy(adapter->port[pidx]->dev_addr, hw_addr, ETH_ALEN); memcpy(adapter->port[pidx]->perm_addr, hw_addr, ETH_ALEN); } /** * netdev2pinfo - return the port_info structure associated with a net_device * @dev: the netdev * * Return the struct port_info associated with a net_device */ static inline struct port_info *netdev2pinfo(const struct net_device *dev) { return netdev_priv(dev); } /** * adap2pinfo - return the port_info of a port * @adap: the adapter * @pidx: the port index * * Return the port_info structure for the adapter. */ static inline struct port_info *adap2pinfo(struct adapter *adapter, int pidx) { return netdev_priv(adapter->port[pidx]); } /** * netdev2adap - return the adapter structure associated with a net_device * @dev: the netdev * * Return the struct adapter associated with a net_device */ static inline struct adapter *netdev2adap(const struct net_device *dev) { return netdev2pinfo(dev)->adapter; } /* * OS "Callback" function declarations. These are functions that the OS code * is "contracted" to provide for the common code. */ void t4vf_os_link_changed(struct adapter *, int, int); /* * SGE function prototype declarations. */ int t4vf_sge_alloc_rxq(struct adapter *, struct sge_rspq *, bool, struct net_device *, int, struct sge_fl *, rspq_handler_t); int t4vf_sge_alloc_eth_txq(struct adapter *, struct sge_eth_txq *, struct net_device *, struct netdev_queue *, unsigned int); void t4vf_free_sge_resources(struct adapter *); int t4vf_eth_xmit(struct sk_buff *, struct net_device *); int t4vf_ethrx_handler(struct sge_rspq *, const __be64 *, const struct pkt_gl *); irq_handler_t t4vf_intr_handler(struct adapter *); irqreturn_t t4vf_sge_intr_msix(int, void *); int t4vf_sge_init(struct adapter *); void t4vf_sge_start(struct adapter *); void t4vf_sge_stop(struct adapter *); #endif /* __CXGB4VF_ADAPTER_H__ */