// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2018-2019, Vladimir Oltean */ #include "sja1105.h" /* In the dynamic configuration interface, the switch exposes a register-like * view of some of the static configuration tables. * Many times the field organization of the dynamic tables is abbreviated (not * all fields are dynamically reconfigurable) and different from the static * ones, but the key reason for having it is that we can spare a switch reset * for settings that can be changed dynamically. * * This file creates a per-switch-family abstraction called * struct sja1105_dynamic_table_ops and two operations that work with it: * - sja1105_dynamic_config_write * - sja1105_dynamic_config_read * * Compared to the struct sja1105_table_ops from sja1105_static_config.c, * the dynamic accessors work with a compound buffer: * * packed_buf * * | * V * +-----------------------------------------+------------------+ * | ENTRY BUFFER | COMMAND BUFFER | * +-----------------------------------------+------------------+ * * <----------------------- packed_size ------------------------> * * The ENTRY BUFFER may or may not have the same layout, or size, as its static * configuration table entry counterpart. When it does, the same packing * function is reused (bar exceptional cases - see * sja1105pqrs_dyn_l2_lookup_entry_packing). * * The reason for the COMMAND BUFFER being at the end is to be able to send * a dynamic write command through a single SPI burst. By the time the switch * reacts to the command, the ENTRY BUFFER is already populated with the data * sent by the core. * * The COMMAND BUFFER is always SJA1105_SIZE_DYN_CMD bytes (one 32-bit word) in * size. * * Sometimes the ENTRY BUFFER does not really exist (when the number of fields * that can be reconfigured is small), then the switch repurposes some of the * unused 32 bits of the COMMAND BUFFER to hold ENTRY data. * * The key members of struct sja1105_dynamic_table_ops are: * - .entry_packing: A function that deals with packing an ENTRY structure * into an SPI buffer, or retrieving an ENTRY structure * from one. * The @packed_buf pointer it's given does always point to * the ENTRY portion of the buffer. * - .cmd_packing: A function that deals with packing/unpacking the COMMAND * structure to/from the SPI buffer. * It is given the same @packed_buf pointer as .entry_packing, * so most of the time, the @packed_buf points *behind* the * COMMAND offset inside the buffer. * To access the COMMAND portion of the buffer, the function * knows its correct offset. * Giving both functions the same pointer is handy because in * extreme cases (see sja1105pqrs_dyn_l2_lookup_entry_packing) * the .entry_packing is able to jump to the COMMAND portion, * or vice-versa (sja1105pqrs_l2_lookup_cmd_packing). * - .access: A bitmap of: * OP_READ: Set if the hardware manual marks the ENTRY portion of the * dynamic configuration table buffer as R (readable) after * an SPI read command (the switch will populate the buffer). * OP_WRITE: Set if the manual marks the ENTRY portion of the dynamic * table buffer as W (writable) after an SPI write command * (the switch will read the fields provided in the buffer). * OP_DEL: Set if the manual says the VALIDENT bit is supported in the * COMMAND portion of this dynamic config buffer (i.e. the * specified entry can be invalidated through a SPI write * command). * OP_SEARCH: Set if the manual says that the index of an entry can * be retrieved in the COMMAND portion of the buffer based * on its ENTRY portion, as a result of a SPI write command. * Only the TCAM-based FDB table on SJA1105 P/Q/R/S supports * this. * - .max_entry_count: The number of entries, counting from zero, that can be * reconfigured through the dynamic interface. If a static * table can be reconfigured at all dynamically, this * number always matches the maximum number of supported * static entries. * - .packed_size: The length in bytes of the compound ENTRY + COMMAND BUFFER. * Note that sometimes the compound buffer may contain holes in * it (see sja1105_vlan_lookup_cmd_packing). The @packed_buf is * contiguous however, so @packed_size includes any unused * bytes. * - .addr: The base SPI address at which the buffer must be written to the * switch's memory. When looking at the hardware manual, this must * always match the lowest documented address for the ENTRY, and not * that of the COMMAND, since the other 32-bit words will follow along * at the correct addresses. */ #define SJA1105_SIZE_DYN_CMD 4 #define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY \ SJA1105_SIZE_DYN_CMD #define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD \ (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY) #define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD \ (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY) #define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD \ (SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY) #define SJA1105_SIZE_L2_FORWARDING_DYN_CMD \ (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY) #define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD \ (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY) #define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD \ (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY) #define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ SJA1105_SIZE_DYN_CMD #define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD \ SJA1105_SIZE_DYN_CMD #define SJA1105_MAX_DYN_CMD_SIZE \ SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD struct sja1105_dyn_cmd { bool search; u64 valid; u64 rdwrset; u64 errors; u64 valident; u64 index; }; enum sja1105_hostcmd { SJA1105_HOSTCMD_SEARCH = 1, SJA1105_HOSTCMD_READ = 2, SJA1105_HOSTCMD_WRITE = 3, SJA1105_HOSTCMD_INVALIDATE = 4, }; static void sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; const int size = SJA1105_SIZE_DYN_CMD; u64 hostcmd; sja1105_packing(p, &cmd->valid, 31, 31, size, op); sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); sja1105_packing(p, &cmd->errors, 29, 29, size, op); sja1105_packing(p, &cmd->valident, 27, 27, size, op); /* VALIDENT is supposed to indicate "keep or not", but in SJA1105 E/T, * using it to delete a management route was unsupported. UM10944 * said about it: * * In case of a write access with the MGMTROUTE flag set, * the flag will be ignored. It will always be found cleared * for read accesses with the MGMTROUTE flag set. * * SJA1105 P/Q/R/S keeps the same behavior w.r.t. VALIDENT, but there * is now another flag called HOSTCMD which does more stuff (quoting * from UM11040): * * A write request is accepted only when HOSTCMD is set to write host * or invalid. A read request is accepted only when HOSTCMD is set to * search host or read host. * * So it is possible to translate a RDWRSET/VALIDENT combination into * HOSTCMD so that we keep the dynamic command API in place, and * at the same time achieve compatibility with the management route * command structure. */ if (cmd->rdwrset == SPI_READ) { if (cmd->search) hostcmd = SJA1105_HOSTCMD_SEARCH; else hostcmd = SJA1105_HOSTCMD_READ; } else { /* SPI_WRITE */ if (cmd->valident) hostcmd = SJA1105_HOSTCMD_WRITE; else hostcmd = SJA1105_HOSTCMD_INVALIDATE; } sja1105_packing(p, &hostcmd, 25, 23, size, op); /* Hack - The hardware takes the 'index' field within * struct sja1105_l2_lookup_entry as the index on which this command * will operate. However it will ignore everything else, so 'index' * is logically part of command but physically part of entry. * Populate the 'index' entry field from within the command callback, * such that our API doesn't need to ask for a full-blown entry * structure when e.g. a delete is requested. */ sja1105_packing(buf, &cmd->index, 15, 6, SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op); } /* The switch is so retarded that it makes our command/entry abstraction * crumble apart. * * On P/Q/R/S, the switch tries to say whether a FDB entry * is statically programmed or dynamically learned via a flag called LOCKEDS. * The hardware manual says about this fiels: * * On write will specify the format of ENTRY. * On read the flag will be found cleared at times the VALID flag is found * set. The flag will also be found cleared in response to a read having the * MGMTROUTE flag set. In response to a read with the MGMTROUTE flag * cleared, the flag be set if the most recent access operated on an entry * that was either loaded by configuration or through dynamic reconfiguration * (as opposed to automatically learned entries). * * The trouble with this flag is that it's part of the *command* to access the * dynamic interface, and not part of the *entry* retrieved from it. * Otherwise said, for a sja1105_dynamic_config_read, LOCKEDS is supposed to be * an output from the switch into the command buffer, and for a * sja1105_dynamic_config_write, the switch treats LOCKEDS as an input * (hence we can write either static, or automatically learned entries, from * the core). * But the manual contradicts itself in the last phrase where it says that on * read, LOCKEDS will be set to 1 for all FDB entries written through the * dynamic interface (therefore, the value of LOCKEDS from the * sja1105_dynamic_config_write is not really used for anything, it'll store a * 1 anyway). * This means you can't really write a FDB entry with LOCKEDS=0 (automatically * learned) into the switch, which kind of makes sense. * As for reading through the dynamic interface, it doesn't make too much sense * to put LOCKEDS into the command, since the switch will inevitably have to * ignore it (otherwise a command would be like "read the FDB entry 123, but * only if it's dynamically learned" <- well how am I supposed to know?) and * just use it as an output buffer for its findings. But guess what... that's * what the entry buffer is for! * Unfortunately, what really breaks this abstraction is the fact that it * wasn't designed having the fact in mind that the switch can output * entry-related data as writeback through the command buffer. * However, whether a FDB entry is statically or dynamically learned *is* part * of the entry and not the command data, no matter what the switch thinks. * In order to do that, we'll need to wrap around the * sja1105pqrs_l2_lookup_entry_packing from sja1105_static_config.c, and take * a peek outside of the caller-supplied @buf (the entry buffer), to reach the * command buffer. */ static size_t sja1105pqrs_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { struct sja1105_l2_lookup_entry *entry = entry_ptr; u8 *cmd = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; const int size = SJA1105_SIZE_DYN_CMD; sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); return sja1105pqrs_l2_lookup_entry_packing(buf, entry_ptr, op); } static void sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; const int size = SJA1105_SIZE_DYN_CMD; sja1105_packing(p, &cmd->valid, 31, 31, size, op); sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); sja1105_packing(p, &cmd->errors, 29, 29, size, op); sja1105_packing(p, &cmd->valident, 27, 27, size, op); /* Hack - see comments above. */ sja1105_packing(buf, &cmd->index, 29, 20, SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op); } static size_t sja1105et_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { struct sja1105_l2_lookup_entry *entry = entry_ptr; u8 *cmd = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; const int size = SJA1105_SIZE_DYN_CMD; sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); return sja1105et_l2_lookup_entry_packing(buf, entry_ptr, op); } static void sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; u64 mgmtroute = 1; sja1105et_l2_lookup_cmd_packing(buf, cmd, op); if (op == PACK) sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); } static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { struct sja1105_mgmt_entry *entry = entry_ptr; const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; /* UM10944: To specify if a PTP egress timestamp shall be captured on * each port upon transmission of the frame, the LSB of VLANID in the * ENTRY field provided by the host must be set. * Bit 1 of VLANID then specifies the register where the timestamp for * this port is stored in. */ sja1105_packing(buf, &entry->tsreg, 85, 85, size, op); sja1105_packing(buf, &entry->takets, 84, 84, size, op); sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); sja1105_packing(buf, &entry->destports, 35, 31, size, op); sja1105_packing(buf, &entry->enfport, 30, 30, size, op); return size; } static void sja1105pqrs_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; u64 mgmtroute = 1; sja1105pqrs_l2_lookup_cmd_packing(buf, cmd, op); if (op == PACK) sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); } static size_t sja1105pqrs_mgmt_route_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; struct sja1105_mgmt_entry *entry = entry_ptr; /* In P/Q/R/S, enfport got renamed to mgmtvalid, but its purpose * is the same (driver uses it to confirm that frame was sent). * So just keep the name from E/T. */ sja1105_packing(buf, &entry->tsreg, 71, 71, size, op); sja1105_packing(buf, &entry->takets, 70, 70, size, op); sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); sja1105_packing(buf, &entry->destports, 21, 17, size, op); sja1105_packing(buf, &entry->enfport, 16, 16, size, op); return size; } /* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29, * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap * between entry (0x2d, 0x2e) and command (0x30). */ static void sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4; const int size = SJA1105_SIZE_DYN_CMD; sja1105_packing(p, &cmd->valid, 31, 31, size, op); sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); sja1105_packing(p, &cmd->valident, 27, 27, size, op); /* Hack - see comments above, applied for 'vlanid' field of * struct sja1105_vlan_lookup_entry. */ sja1105_packing(buf, &cmd->index, 38, 27, SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op); } static void sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY; const int size = SJA1105_SIZE_DYN_CMD; sja1105_packing(p, &cmd->valid, 31, 31, size, op); sja1105_packing(p, &cmd->errors, 30, 30, size, op); sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); sja1105_packing(p, &cmd->index, 4, 0, size, op); } static void sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { const int size = SJA1105_SIZE_DYN_CMD; /* Yup, user manual definitions are reversed */ u8 *reg1 = buf + 4; sja1105_packing(reg1, &cmd->valid, 31, 31, size, op); sja1105_packing(reg1, &cmd->index, 26, 24, size, op); } static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; struct sja1105_mac_config_entry *entry = entry_ptr; /* Yup, user manual definitions are reversed */ u8 *reg1 = buf + 4; u8 *reg2 = buf; sja1105_packing(reg1, &entry->speed, 30, 29, size, op); sja1105_packing(reg1, &entry->drpdtag, 23, 23, size, op); sja1105_packing(reg1, &entry->drpuntag, 22, 22, size, op); sja1105_packing(reg1, &entry->retag, 21, 21, size, op); sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op); sja1105_packing(reg1, &entry->egress, 19, 19, size, op); sja1105_packing(reg1, &entry->ingress, 18, 18, size, op); sja1105_packing(reg1, &entry->ing_mirr, 17, 17, size, op); sja1105_packing(reg1, &entry->egr_mirr, 16, 16, size, op); sja1105_packing(reg1, &entry->vlanprio, 14, 12, size, op); sja1105_packing(reg1, &entry->vlanid, 11, 0, size, op); sja1105_packing(reg2, &entry->tp_delin, 31, 16, size, op); sja1105_packing(reg2, &entry->tp_delout, 15, 0, size, op); /* MAC configuration table entries which can't be reconfigured: * top, base, enabled, ifg, maxage, drpnona664 */ /* Bogus return value, not used anywhere */ return 0; } static void sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; sja1105_packing(p, &cmd->valid, 31, 31, size, op); sja1105_packing(p, &cmd->errors, 30, 30, size, op); sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); sja1105_packing(p, &cmd->index, 2, 0, size, op); } static void sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { sja1105_packing(buf, &cmd->valid, 31, 31, SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); } static size_t sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { struct sja1105_l2_lookup_params_entry *entry = entry_ptr; sja1105_packing(buf, &entry->poly, 7, 0, SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); /* Bogus return value, not used anywhere */ return 0; } static void sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) { const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; sja1105_packing(buf, &cmd->valid, 31, 31, size, op); sja1105_packing(buf, &cmd->errors, 30, 30, size, op); } static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, enum packing_op op) { struct sja1105_general_params_entry *entry = entry_ptr; const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op); /* Bogus return value, not used anywhere */ return 0; } #define OP_READ BIT(0) #define OP_WRITE BIT(1) #define OP_DEL BIT(2) #define OP_SEARCH BIT(3) /* SJA1105E/T: First generation */ struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = { [BLK_IDX_SCHEDULE] = {0}, [BLK_IDX_SCHEDULE_ENTRY_POINTS] = {0}, [BLK_IDX_L2_LOOKUP] = { .entry_packing = sja1105et_dyn_l2_lookup_entry_packing, .cmd_packing = sja1105et_l2_lookup_cmd_packing, .access = (OP_READ | OP_WRITE | OP_DEL), .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, .addr = 0x20, }, [BLK_IDX_MGMT_ROUTE] = { .entry_packing = sja1105et_mgmt_route_entry_packing, .cmd_packing = sja1105et_mgmt_route_cmd_packing, .access = (OP_READ | OP_WRITE), .max_entry_count = SJA1105_NUM_PORTS, .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, .addr = 0x20, }, [BLK_IDX_L2_POLICING] = {0}, [BLK_IDX_VLAN_LOOKUP] = { .entry_packing = sja1105_vlan_lookup_entry_packing, .cmd_packing = sja1105_vlan_lookup_cmd_packing, .access = (OP_WRITE | OP_DEL), .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, .addr = 0x27, }, [BLK_IDX_L2_FORWARDING] = { .entry_packing = sja1105_l2_forwarding_entry_packing, .cmd_packing = sja1105_l2_forwarding_cmd_packing, .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, .access = OP_WRITE, .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, .addr = 0x24, }, [BLK_IDX_MAC_CONFIG] = { .entry_packing = sja1105et_mac_config_entry_packing, .cmd_packing = sja1105et_mac_config_cmd_packing, .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, .access = OP_WRITE, .packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD, .addr = 0x36, }, [BLK_IDX_SCHEDULE_PARAMS] = {0}, [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = {0}, [BLK_IDX_L2_LOOKUP_PARAMS] = { .entry_packing = sja1105et_l2_lookup_params_entry_packing, .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, .access = OP_WRITE, .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, .addr = 0x38, }, [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, [BLK_IDX_AVB_PARAMS] = {0}, [BLK_IDX_GENERAL_PARAMS] = { .entry_packing = sja1105et_general_params_entry_packing, .cmd_packing = sja1105et_general_params_cmd_packing, .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, .access = OP_WRITE, .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, .addr = 0x34, }, [BLK_IDX_XMII_PARAMS] = {0}, }; /* SJA1105P/Q/R/S: Second generation */ struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = { [BLK_IDX_SCHEDULE] = {0}, [BLK_IDX_SCHEDULE_ENTRY_POINTS] = {0}, [BLK_IDX_L2_LOOKUP] = { .entry_packing = sja1105pqrs_dyn_l2_lookup_entry_packing, .cmd_packing = sja1105pqrs_l2_lookup_cmd_packing, .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH), .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD, .addr = 0x24, }, [BLK_IDX_MGMT_ROUTE] = { .entry_packing = sja1105pqrs_mgmt_route_entry_packing, .cmd_packing = sja1105pqrs_mgmt_route_cmd_packing, .access = (OP_READ | OP_WRITE | OP_DEL | OP_SEARCH), .max_entry_count = SJA1105_NUM_PORTS, .packed_size = SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD, .addr = 0x24, }, [BLK_IDX_L2_POLICING] = {0}, [BLK_IDX_VLAN_LOOKUP] = { .entry_packing = sja1105_vlan_lookup_entry_packing, .cmd_packing = sja1105_vlan_lookup_cmd_packing, .access = (OP_READ | OP_WRITE | OP_DEL), .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, .addr = 0x2D, }, [BLK_IDX_L2_FORWARDING] = { .entry_packing = sja1105_l2_forwarding_entry_packing, .cmd_packing = sja1105_l2_forwarding_cmd_packing, .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, .access = OP_WRITE, .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, .addr = 0x2A, }, [BLK_IDX_MAC_CONFIG] = { .entry_packing = sja1105pqrs_mac_config_entry_packing, .cmd_packing = sja1105pqrs_mac_config_cmd_packing, .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, .access = (OP_READ | OP_WRITE), .packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD, .addr = 0x4B, }, [BLK_IDX_SCHEDULE_PARAMS] = {0}, [BLK_IDX_SCHEDULE_ENTRY_POINTS_PARAMS] = {0}, [BLK_IDX_L2_LOOKUP_PARAMS] = { .entry_packing = sja1105et_l2_lookup_params_entry_packing, .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, .access = (OP_READ | OP_WRITE), .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, .addr = 0x38, }, [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, [BLK_IDX_AVB_PARAMS] = {0}, [BLK_IDX_GENERAL_PARAMS] = { .entry_packing = sja1105et_general_params_entry_packing, .cmd_packing = sja1105et_general_params_cmd_packing, .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, .access = OP_WRITE, .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, .addr = 0x34, }, [BLK_IDX_XMII_PARAMS] = {0}, }; /* Provides read access to the settings through the dynamic interface * of the switch. * @blk_idx is used as key to select from the sja1105_dynamic_table_ops. * The selection is limited by the hardware in respect to which * configuration blocks can be read through the dynamic interface. * @index is used to retrieve a particular table entry. If negative, * (and if the @blk_idx supports the searching operation) a search * is performed by the @entry parameter. * @entry Type-casted to an unpacked structure that holds a table entry * of the type specified in @blk_idx. * Usually an output argument. If @index is negative, then this * argument is used as input/output: it should be pre-populated * with the element to search for. Entries which support the * search operation will have an "index" field (not the @index * argument to this function) and that is where the found index * will be returned (or left unmodified - thus negative - if not * found). */ int sja1105_dynamic_config_read(struct sja1105_private *priv, enum sja1105_blk_idx blk_idx, int index, void *entry) { const struct sja1105_dynamic_table_ops *ops; struct sja1105_dyn_cmd cmd = {0}; /* SPI payload buffer */ u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; int retries = 3; int rc; if (blk_idx >= BLK_IDX_MAX_DYN) return -ERANGE; ops = &priv->info->dyn_ops[blk_idx]; if (index >= 0 && index >= ops->max_entry_count) return -ERANGE; if (index < 0 && !(ops->access & OP_SEARCH)) return -EOPNOTSUPP; if (!(ops->access & OP_READ)) return -EOPNOTSUPP; if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) return -ERANGE; if (!ops->cmd_packing) return -EOPNOTSUPP; if (!ops->entry_packing) return -EOPNOTSUPP; cmd.valid = true; /* Trigger action on table entry */ cmd.rdwrset = SPI_READ; /* Action is read */ if (index < 0) { /* Avoid copying a signed negative number to an u64 */ cmd.index = 0; cmd.search = true; } else { cmd.index = index; cmd.search = false; } cmd.valident = true; ops->cmd_packing(packed_buf, &cmd, PACK); if (cmd.search) ops->entry_packing(packed_buf, entry, PACK); /* Send SPI write operation: read config table entry */ rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, ops->packed_size); if (rc < 0) return rc; /* Loop until we have confirmation that hardware has finished * processing the command and has cleared the VALID field */ do { memset(packed_buf, 0, ops->packed_size); /* Retrieve the read operation's result */ rc = sja1105_xfer_buf(priv, SPI_READ, ops->addr, packed_buf, ops->packed_size); if (rc < 0) return rc; cmd = (struct sja1105_dyn_cmd) {0}; ops->cmd_packing(packed_buf, &cmd, UNPACK); /* UM10944: [valident] will always be found cleared * during a read access with MGMTROUTE set. * So don't error out in that case. */ if (!cmd.valident && blk_idx != BLK_IDX_MGMT_ROUTE) return -ENOENT; cpu_relax(); } while (cmd.valid && --retries); if (cmd.valid) return -ETIMEDOUT; /* Don't dereference possibly NULL pointer - maybe caller * only wanted to see whether the entry existed or not. */ if (entry) ops->entry_packing(packed_buf, entry, UNPACK); return 0; } int sja1105_dynamic_config_write(struct sja1105_private *priv, enum sja1105_blk_idx blk_idx, int index, void *entry, bool keep) { const struct sja1105_dynamic_table_ops *ops; struct sja1105_dyn_cmd cmd = {0}; /* SPI payload buffer */ u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; int rc; if (blk_idx >= BLK_IDX_MAX_DYN) return -ERANGE; ops = &priv->info->dyn_ops[blk_idx]; if (index >= ops->max_entry_count) return -ERANGE; if (index < 0) return -ERANGE; if (!(ops->access & OP_WRITE)) return -EOPNOTSUPP; if (!keep && !(ops->access & OP_DEL)) return -EOPNOTSUPP; if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) return -ERANGE; cmd.valident = keep; /* If false, deletes entry */ cmd.valid = true; /* Trigger action on table entry */ cmd.rdwrset = SPI_WRITE; /* Action is write */ cmd.index = index; if (!ops->cmd_packing) return -EOPNOTSUPP; ops->cmd_packing(packed_buf, &cmd, PACK); if (!ops->entry_packing) return -EOPNOTSUPP; /* Don't dereference potentially NULL pointer if just * deleting a table entry is what was requested. For cases * where 'index' field is physically part of entry structure, * and needed here, we deal with that in the cmd_packing callback. */ if (keep) ops->entry_packing(packed_buf, entry, PACK); /* Send SPI write operation: read config table entry */ rc = sja1105_xfer_buf(priv, SPI_WRITE, ops->addr, packed_buf, ops->packed_size); if (rc < 0) return rc; cmd = (struct sja1105_dyn_cmd) {0}; ops->cmd_packing(packed_buf, &cmd, UNPACK); if (cmd.errors) return -EINVAL; return 0; } static u8 sja1105_crc8_add(u8 crc, u8 byte, u8 poly) { int i; for (i = 0; i < 8; i++) { if ((crc ^ byte) & (1 << 7)) { crc <<= 1; crc ^= poly; } else { crc <<= 1; } byte <<= 1; } return crc; } /* CRC8 algorithm with non-reversed input, non-reversed output, * no input xor and no output xor. Code customized for receiving * the SJA1105 E/T FDB keys (vlanid, macaddr) as input. CRC polynomial * is also received as argument in the Koopman notation that the switch * hardware stores it in. */ u8 sja1105et_fdb_hash(struct sja1105_private *priv, const u8 *addr, u16 vid) { struct sja1105_l2_lookup_params_entry *l2_lookup_params = priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS].entries; u64 poly_koopman = l2_lookup_params->poly; /* Convert polynomial from Koopman to 'normal' notation */ u8 poly = (u8)(1 + (poly_koopman << 1)); u64 vlanid = l2_lookup_params->shared_learn ? 0 : vid; u64 input = (vlanid << 48) | ether_addr_to_u64(addr); u8 crc = 0; /* seed */ int i; /* Mask the eight bytes starting from MSB one at a time */ for (i = 56; i >= 0; i -= 8) { u8 byte = (input & (0xffull << i)) >> i; crc = sja1105_crc8_add(crc, byte, poly); } return crc; }