/********************************************************************** * Author: Cavium, Inc. * * Contact: support@cavium.com * Please include "LiquidIO" in the subject. * * Copyright (c) 2003-2016 Cavium, Inc. * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as * published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful, but * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or * NONINFRINGEMENT. See the GNU General Public License for more details. ***********************************************************************/ /*! \file octeon_device.h * \brief Host Driver: This file defines the octeon device structure. */ #ifndef _OCTEON_DEVICE_H_ #define _OCTEON_DEVICE_H_ #include #include /** PCI VendorId Device Id */ #define OCTEON_CN68XX_PCIID 0x91177d #define OCTEON_CN66XX_PCIID 0x92177d #define OCTEON_CN23XX_PCIID_PF 0x9702177d /** Driver identifies chips by these Ids, created by clubbing together * DeviceId+RevisionId; Where Revision Id is not used to distinguish * between chips, a value of 0 is used for revision id. */ #define OCTEON_CN68XX 0x0091 #define OCTEON_CN66XX 0x0092 #define OCTEON_CN23XX_PF_VID 0x9702 #define OCTEON_CN23XX_VF_VID 0x9712 /**RevisionId for the chips */ #define OCTEON_CN23XX_REV_1_0 0x00 #define OCTEON_CN23XX_REV_1_1 0x01 #define OCTEON_CN23XX_REV_2_0 0x80 /**SubsystemId for the chips */ #define OCTEON_CN2350_10GB_SUBSYS_ID_1 0X3177d #define OCTEON_CN2350_10GB_SUBSYS_ID_2 0X4177d #define OCTEON_CN2360_10GB_SUBSYS_ID 0X5177d #define OCTEON_CN2350_25GB_SUBSYS_ID 0X7177d #define OCTEON_CN2360_25GB_SUBSYS_ID 0X6177d /** Endian-swap modes supported by Octeon. */ enum octeon_pci_swap_mode { OCTEON_PCI_PASSTHROUGH = 0, OCTEON_PCI_64BIT_SWAP = 1, OCTEON_PCI_32BIT_BYTE_SWAP = 2, OCTEON_PCI_32BIT_LW_SWAP = 3 }; enum lio_fw_state { FW_IS_PRELOADED = 0, FW_NEEDS_TO_BE_LOADED = 1, FW_IS_BEING_LOADED = 2, FW_HAS_BEEN_LOADED = 3, }; enum { OCTEON_CONFIG_TYPE_DEFAULT = 0, NUM_OCTEON_CONFS, }; #define OCTEON_INPUT_INTR (1) #define OCTEON_OUTPUT_INTR (2) #define OCTEON_MBOX_INTR (4) #define OCTEON_ALL_INTR 0xff /*--------------- PCI BAR1 index registers -------------*/ /* BAR1 Mask */ #define PCI_BAR1_ENABLE_CA 1 #define PCI_BAR1_ENDIAN_MODE OCTEON_PCI_64BIT_SWAP #define PCI_BAR1_ENTRY_VALID 1 #define PCI_BAR1_MASK ((PCI_BAR1_ENABLE_CA << 3) \ | (PCI_BAR1_ENDIAN_MODE << 1) \ | PCI_BAR1_ENTRY_VALID) /** Octeon Device state. * Each octeon device goes through each of these states * as it is initialized. */ #define OCT_DEV_BEGIN_STATE 0x0 #define OCT_DEV_PCI_ENABLE_DONE 0x1 #define OCT_DEV_PCI_MAP_DONE 0x2 #define OCT_DEV_DISPATCH_INIT_DONE 0x3 #define OCT_DEV_INSTR_QUEUE_INIT_DONE 0x4 #define OCT_DEV_SC_BUFF_POOL_INIT_DONE 0x5 #define OCT_DEV_RESP_LIST_INIT_DONE 0x6 #define OCT_DEV_DROQ_INIT_DONE 0x7 #define OCT_DEV_MBOX_SETUP_DONE 0x8 #define OCT_DEV_MSIX_ALLOC_VECTOR_DONE 0x9 #define OCT_DEV_INTR_SET_DONE 0xa #define OCT_DEV_IO_QUEUES_DONE 0xb #define OCT_DEV_CONSOLE_INIT_DONE 0xc #define OCT_DEV_HOST_OK 0xd #define OCT_DEV_CORE_OK 0xe #define OCT_DEV_RUNNING 0xf #define OCT_DEV_IN_RESET 0x10 #define OCT_DEV_STATE_INVALID 0x11 #define OCT_DEV_STATES OCT_DEV_STATE_INVALID /** Octeon Device interrupts * These interrupt bits are set in int_status filed of * octeon_device structure */ #define OCT_DEV_INTR_DMA0_FORCE 0x01 #define OCT_DEV_INTR_DMA1_FORCE 0x02 #define OCT_DEV_INTR_PKT_DATA 0x04 #define LIO_RESET_SECS (3) /*---------------------------DISPATCH LIST-------------------------------*/ /** The dispatch list entry. * The driver keeps a record of functions registered for each * response header opcode in this structure. Since the opcode is * hashed to index into the driver's list, more than one opcode * can hash to the same entry, in which case the list field points * to a linked list with the other entries. */ struct octeon_dispatch { /** List head for this entry */ struct list_head list; /** The opcode for which the dispatch function & arg should be used */ u16 opcode; /** The function to be called for a packet received by the driver */ octeon_dispatch_fn_t dispatch_fn; /* The application specified argument to be passed to the above * function along with the received packet */ void *arg; }; /** The dispatch list structure. */ struct octeon_dispatch_list { /** access to dispatch list must be atomic */ spinlock_t lock; /** Count of dispatch functions currently registered */ u32 count; /** The list of dispatch functions */ struct octeon_dispatch *dlist; }; /*----------------------- THE OCTEON DEVICE ---------------------------*/ #define OCT_MEM_REGIONS 3 /** PCI address space mapping information. * Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of * Octeon gets mapped to different physical address spaces in * the kernel. */ struct octeon_mmio { /** PCI address to which the BAR is mapped. */ u64 start; /** Length of this PCI address space. */ u32 len; /** Length that has been mapped to phys. address space. */ u32 mapped_len; /** The physical address to which the PCI address space is mapped. */ u8 __iomem *hw_addr; /** Flag indicating the mapping was successful. */ u32 done; }; #define MAX_OCTEON_MAPS 32 struct octeon_io_enable { u64 iq; u64 oq; u64 iq64B; }; struct octeon_reg_list { u32 __iomem *pci_win_wr_addr_hi; u32 __iomem *pci_win_wr_addr_lo; u64 __iomem *pci_win_wr_addr; u32 __iomem *pci_win_rd_addr_hi; u32 __iomem *pci_win_rd_addr_lo; u64 __iomem *pci_win_rd_addr; u32 __iomem *pci_win_wr_data_hi; u32 __iomem *pci_win_wr_data_lo; u64 __iomem *pci_win_wr_data; u32 __iomem *pci_win_rd_data_hi; u32 __iomem *pci_win_rd_data_lo; u64 __iomem *pci_win_rd_data; }; #define OCTEON_CONSOLE_MAX_READ_BYTES 512 typedef int (*octeon_console_print_fn)(struct octeon_device *oct, u32 num, char *pre, char *suf); struct octeon_console { u32 active; u32 waiting; u64 addr; u32 buffer_size; u64 input_base_addr; u64 output_base_addr; octeon_console_print_fn print; char leftover[OCTEON_CONSOLE_MAX_READ_BYTES]; }; struct octeon_board_info { char name[OCT_BOARD_NAME]; char serial_number[OCT_SERIAL_LEN]; u64 major; u64 minor; }; struct octeon_fn_list { void (*setup_iq_regs)(struct octeon_device *, u32); void (*setup_oq_regs)(struct octeon_device *, u32); irqreturn_t (*process_interrupt_regs)(void *); u64 (*msix_interrupt_handler)(void *); int (*setup_mbox)(struct octeon_device *); int (*free_mbox)(struct octeon_device *); int (*soft_reset)(struct octeon_device *); int (*setup_device_regs)(struct octeon_device *); void (*bar1_idx_setup)(struct octeon_device *, u64, u32, int); void (*bar1_idx_write)(struct octeon_device *, u32, u32); u32 (*bar1_idx_read)(struct octeon_device *, u32); u32 (*update_iq_read_idx)(struct octeon_instr_queue *); void (*enable_oq_pkt_time_intr)(struct octeon_device *, u32); void (*disable_oq_pkt_time_intr)(struct octeon_device *, u32); void (*enable_interrupt)(struct octeon_device *, u8); void (*disable_interrupt)(struct octeon_device *, u8); int (*enable_io_queues)(struct octeon_device *); void (*disable_io_queues)(struct octeon_device *); }; /* Must be multiple of 8, changing breaks ABI */ #define CVMX_BOOTMEM_NAME_LEN 128 /* Structure for named memory blocks * Number of descriptors * available can be changed without affecting compatibility, * but name length changes require a bump in the bootmem * descriptor version * Note: This structure must be naturally 64 bit aligned, as a single * memory image will be used by both 32 and 64 bit programs. */ struct cvmx_bootmem_named_block_desc { /** Base address of named block */ u64 base_addr; /** Size actually allocated for named block */ u64 size; /** name of named block */ char name[CVMX_BOOTMEM_NAME_LEN]; }; struct oct_fw_info { u32 max_nic_ports; /** max nic ports for the device */ u32 num_gmx_ports; /** num gmx ports */ u64 app_cap_flags; /** firmware cap flags */ /** The core application is running in this mode. * See octeon-drv-opcodes.h for values. */ u32 app_mode; char liquidio_firmware_version[32]; /* Fields extracted from legacy string 'liquidio_firmware_version' */ struct { u8 maj; u8 min; u8 rev; } ver; }; #define OCT_FW_VER(maj, min, rev) \ (((u32)(maj) << 16) | ((u32)(min) << 8) | ((u32)(rev))) /* wrappers around work structs */ struct cavium_wk { struct delayed_work work; void *ctxptr; u64 ctxul; }; struct cavium_wq { struct workqueue_struct *wq; struct cavium_wk wk; }; struct octdev_props { /* Each interface in the Octeon device has a network * device pointer (used for OS specific calls). */ int rx_on; int fec; int fec_boot; int napi_enabled; int gmxport; struct net_device *netdev; }; #define LIO_FLAG_MSIX_ENABLED 0x1 #define MSIX_PO_INT 0x1 #define MSIX_PI_INT 0x2 #define MSIX_MBOX_INT 0x4 struct octeon_pf_vf_hs_word { #ifdef __LITTLE_ENDIAN_BITFIELD /** PKIND value assigned for the DPI interface */ u64 pkind : 8; /** OCTEON core clock multiplier */ u64 core_tics_per_us : 16; /** OCTEON coprocessor clock multiplier */ u64 coproc_tics_per_us : 16; /** app that currently running on OCTEON */ u64 app_mode : 8; /** RESERVED */ u64 reserved : 16; #else /** RESERVED */ u64 reserved : 16; /** app that currently running on OCTEON */ u64 app_mode : 8; /** OCTEON coprocessor clock multiplier */ u64 coproc_tics_per_us : 16; /** OCTEON core clock multiplier */ u64 core_tics_per_us : 16; /** PKIND value assigned for the DPI interface */ u64 pkind : 8; #endif }; struct octeon_sriov_info { /* Number of rings assigned to VF */ u32 rings_per_vf; /** Max Number of VF devices that can be enabled. This variable can * specified during load time or it will be derived after allocating * PF queues. When max_vfs is derived then each VF will get one queue **/ u32 max_vfs; /** Number of VF devices enabled using sysfs. */ u32 num_vfs_alloced; /* Actual rings left for PF device */ u32 num_pf_rings; /* SRN of PF usable IO queues */ u32 pf_srn; /* total pf rings */ u32 trs; u32 sriov_enabled; struct lio_trusted_vf trusted_vf; /*lookup table that maps DPI ring number to VF pci_dev struct pointer*/ struct pci_dev *dpiring_to_vfpcidev_lut[MAX_POSSIBLE_VFS]; u64 vf_macaddr[MAX_POSSIBLE_VFS]; u16 vf_vlantci[MAX_POSSIBLE_VFS]; int vf_linkstate[MAX_POSSIBLE_VFS]; bool vf_spoofchk[MAX_POSSIBLE_VFS]; u64 vf_drv_loaded_mask; }; struct octeon_ioq_vector { struct octeon_device *oct_dev; int iq_index; int droq_index; int vector; struct octeon_mbox *mbox; struct cpumask affinity_mask; u32 ioq_num; }; struct lio_vf_rep_list { int num_vfs; struct net_device *ndev[CN23XX_MAX_VFS_PER_PF]; }; struct lio_devlink_priv { struct octeon_device *oct; }; /** The Octeon device. * Each Octeon device has this structure to represent all its * components. */ struct octeon_device { /** Lock for PCI window configuration accesses */ spinlock_t pci_win_lock; /** Lock for memory accesses */ spinlock_t mem_access_lock; /** PCI device pointer */ struct pci_dev *pci_dev; /** Chip specific information. */ void *chip; /** Number of interfaces detected in this octeon device. */ u32 ifcount; struct octdev_props props[MAX_OCTEON_LINKS]; /** Octeon Chip type. */ u16 chip_id; u16 rev_id; u32 subsystem_id; u16 pf_num; u16 vf_num; /** This device's id - set by the driver. */ u32 octeon_id; /** This device's PCIe port used for traffic. */ u16 pcie_port; u16 flags; #define LIO_FLAG_MSI_ENABLED (u32)(1 << 1) /** The state of this device */ atomic_t status; /** memory mapped io range */ struct octeon_mmio mmio[OCT_MEM_REGIONS]; struct octeon_reg_list reg_list; struct octeon_fn_list fn_list; struct octeon_board_info boardinfo; u32 num_iqs; /* The pool containing pre allocated buffers used for soft commands */ struct octeon_sc_buffer_pool sc_buf_pool; /** The input instruction queues */ struct octeon_instr_queue *instr_queue [MAX_POSSIBLE_OCTEON_INSTR_QUEUES]; /** The doubly-linked list of instruction response */ struct octeon_response_list response_list[MAX_RESPONSE_LISTS]; u32 num_oqs; /** The DROQ output queues */ struct octeon_droq *droq[MAX_POSSIBLE_OCTEON_OUTPUT_QUEUES]; struct octeon_io_enable io_qmask; /** List of dispatch functions */ struct octeon_dispatch_list dispatch; u32 int_status; u64 droq_intr; /** Physical location of the cvmx_bootmem_desc_t in octeon memory */ u64 bootmem_desc_addr; /** Placeholder memory for named blocks. * Assumes single-threaded access */ struct cvmx_bootmem_named_block_desc bootmem_named_block_desc; /** Address of consoles descriptor */ u64 console_desc_addr; /** Number of consoles available. 0 means they are inaccessible */ u32 num_consoles; /* Console caches */ struct octeon_console console[MAX_OCTEON_MAPS]; /* Console named block info */ struct { u64 dram_region_base; int bar1_index; } console_nb_info; /* Coprocessor clock rate. */ u64 coproc_clock_rate; /** The core application is running in this mode. See liquidio_common.h * for values. */ u32 app_mode; struct oct_fw_info fw_info; /** The name given to this device. */ char device_name[32]; /** Application Context */ void *app_ctx; struct cavium_wq dma_comp_wq; /** Lock for dma response list */ spinlock_t cmd_resp_wqlock; u32 cmd_resp_state; struct cavium_wq check_db_wq[MAX_POSSIBLE_OCTEON_INSTR_QUEUES]; struct cavium_wk nic_poll_work; struct cavium_wk console_poll_work[MAX_OCTEON_MAPS]; void *priv; int num_msix_irqs; void *msix_entries; /* when requesting IRQs, the names are stored here */ void *irq_name_storage; struct octeon_sriov_info sriov_info; struct octeon_pf_vf_hs_word pfvf_hsword; int msix_on; /** Mail Box details of each octeon queue. */ struct octeon_mbox *mbox[MAX_POSSIBLE_VFS]; /** IOq information of it's corresponding MSI-X interrupt. */ struct octeon_ioq_vector *ioq_vector; int rx_pause; int tx_pause; struct oct_link_stats link_stats; /*stastics from firmware*/ /* private flags to control driver-specific features through ethtool */ u32 priv_flags; void *watchdog_task; u32 rx_coalesce_usecs; u32 rx_max_coalesced_frames; u32 tx_max_coalesced_frames; bool cores_crashed; struct { int bus; int dev; int func; } loc; atomic_t *adapter_refcount; /* reference count of adapter */ atomic_t *adapter_fw_state; /* per-adapter, lio_fw_state */ bool ptp_enable; struct lio_vf_rep_list vf_rep_list; struct devlink *devlink; enum devlink_eswitch_mode eswitch_mode; /* for 25G NIC speed change */ u8 speed_boot; u8 speed_setting; u8 no_speed_setting; u32 vfstats_poll; #define LIO_VFSTATS_POLL 10 }; #define OCT_DRV_ONLINE 1 #define OCT_DRV_OFFLINE 2 #define OCTEON_CN6XXX(oct) ({ \ typeof(oct) _oct = (oct); \ ((_oct->chip_id == OCTEON_CN66XX) || \ (_oct->chip_id == OCTEON_CN68XX)); }) #define OCTEON_CN23XX_PF(oct) ((oct)->chip_id == OCTEON_CN23XX_PF_VID) #define OCTEON_CN23XX_VF(oct) ((oct)->chip_id == OCTEON_CN23XX_VF_VID) #define CHIP_CONF(oct, TYPE) \ (((struct octeon_ ## TYPE *)((oct)->chip))->conf) #define MAX_IO_PENDING_PKT_COUNT 100 /*------------------ Function Prototypes ----------------------*/ /** Initialize device list memory */ void octeon_init_device_list(int conf_type); /** Free memory for Input and Output queue structures for a octeon device */ void octeon_free_device_mem(struct octeon_device *oct); /* Look up a free entry in the octeon_device table and allocate resources * for the octeon_device structure for an octeon device. Called at init * time. */ struct octeon_device *octeon_allocate_device(u32 pci_id, u32 priv_size); /** Register a device's bus location at initialization time. * @param octeon_dev - pointer to the octeon device structure. * @param bus - PCIe bus # * @param dev - PCIe device # * @param func - PCIe function # * @param is_pf - TRUE for PF, FALSE for VF * @return reference count of device's adapter */ int octeon_register_device(struct octeon_device *oct, int bus, int dev, int func, int is_pf); /** Deregister a device at de-initialization time. * @param octeon_dev - pointer to the octeon device structure. * @return reference count of device's adapter */ int octeon_deregister_device(struct octeon_device *oct); /** Initialize the driver's dispatch list which is a mix of a hash table * and a linked list. This is done at driver load time. * @param octeon_dev - pointer to the octeon device structure. * @return 0 on success, else -ve error value */ int octeon_init_dispatch_list(struct octeon_device *octeon_dev); /** Delete the driver's dispatch list and all registered entries. * This is done at driver unload time. * @param octeon_dev - pointer to the octeon device structure. */ void octeon_delete_dispatch_list(struct octeon_device *octeon_dev); /** Initialize the core device fields with the info returned by the FW. * @param recv_info - Receive info structure * @param buf - Receive buffer */ int octeon_core_drv_init(struct octeon_recv_info *recv_info, void *buf); /** Gets the dispatch function registered to receive packets with a * given opcode/subcode. * @param octeon_dev - the octeon device pointer. * @param opcode - the opcode for which the dispatch function * is to checked. * @param subcode - the subcode for which the dispatch function * is to checked. * * @return Success: octeon_dispatch_fn_t (dispatch function pointer) * @return Failure: NULL * * Looks up the dispatch list to get the dispatch function for a * given opcode. */ octeon_dispatch_fn_t octeon_get_dispatch(struct octeon_device *octeon_dev, u16 opcode, u16 subcode); /** Get the octeon device pointer. * @param octeon_id - The id for which the octeon device pointer is required. * @return Success: Octeon device pointer. * @return Failure: NULL. */ struct octeon_device *lio_get_device(u32 octeon_id); /** Get the octeon id assigned to the octeon device passed as argument. * This function is exported to other modules. * @param dev - octeon device pointer passed as a void *. * @return octeon device id */ int lio_get_device_id(void *dev); static inline u16 OCTEON_MAJOR_REV(struct octeon_device *oct) { u16 rev = (oct->rev_id & 0xC) >> 2; return (rev == 0) ? 1 : rev; } static inline u16 OCTEON_MINOR_REV(struct octeon_device *oct) { return oct->rev_id & 0x3; } /** Read windowed register. * @param oct - pointer to the Octeon device. * @param addr - Address of the register to read. * * This routine is called to read from the indirectly accessed * Octeon registers that are visible through a PCI BAR0 mapped window * register. * @return - 64 bit value read from the register. */ u64 lio_pci_readq(struct octeon_device *oct, u64 addr); /** Write windowed register. * @param oct - pointer to the Octeon device. * @param val - Value to write * @param addr - Address of the register to write * * This routine is called to write to the indirectly accessed * Octeon registers that are visible through a PCI BAR0 mapped window * register. * @return Nothing. */ void lio_pci_writeq(struct octeon_device *oct, u64 val, u64 addr); /* Routines for reading and writing CSRs */ #define octeon_write_csr(oct_dev, reg_off, value) \ writel(value, (oct_dev)->mmio[0].hw_addr + (reg_off)) #define octeon_write_csr64(oct_dev, reg_off, val64) \ writeq(val64, (oct_dev)->mmio[0].hw_addr + (reg_off)) #define octeon_read_csr(oct_dev, reg_off) \ readl((oct_dev)->mmio[0].hw_addr + (reg_off)) #define octeon_read_csr64(oct_dev, reg_off) \ readq((oct_dev)->mmio[0].hw_addr + (reg_off)) /** * Checks if memory access is okay * * @param oct which octeon to send to * @return Zero on success, negative on failure. */ int octeon_mem_access_ok(struct octeon_device *oct); /** * Waits for DDR initialization. * * @param oct which octeon to send to * @param timeout_in_ms pointer to how long to wait until DDR is initialized * in ms. * If contents are 0, it waits until contents are non-zero * before starting to check. * @return Zero on success, negative on failure. */ int octeon_wait_for_ddr_init(struct octeon_device *oct, u32 *timeout_in_ms); /** * Wait for u-boot to boot and be waiting for a command. * * @param wait_time_hundredths * Maximum time to wait * * @return Zero on success, negative on failure. */ int octeon_wait_for_bootloader(struct octeon_device *oct, u32 wait_time_hundredths); /** * Initialize console access * * @param oct which octeon initialize * @return Zero on success, negative on failure. */ int octeon_init_consoles(struct octeon_device *oct); /** * Adds access to a console to the device. * * @param oct: which octeon to add to * @param console_num: which console * @param dbg_enb: ptr to debug enablement string, one of: * * NULL for no debug output (i.e. disabled) * * empty string enables debug output (via default method) * * specific string to enable debug console output * * @return Zero on success, negative on failure. */ int octeon_add_console(struct octeon_device *oct, u32 console_num, char *dbg_enb); /** write or read from a console */ int octeon_console_write(struct octeon_device *oct, u32 console_num, char *buffer, u32 write_request_size, u32 flags); int octeon_console_write_avail(struct octeon_device *oct, u32 console_num); int octeon_console_read_avail(struct octeon_device *oct, u32 console_num); /** Removes all attached consoles. */ void octeon_remove_consoles(struct octeon_device *oct); /** * Send a string to u-boot on console 0 as a command. * * @param oct which octeon to send to * @param cmd_str String to send * @param wait_hundredths Time to wait for u-boot to accept the command. * * @return Zero on success, negative on failure. */ int octeon_console_send_cmd(struct octeon_device *oct, char *cmd_str, u32 wait_hundredths); /** Parses, validates, and downloads firmware, then boots associated cores. * @param oct which octeon to download firmware to * @param data - The complete firmware file image * @param size - The size of the data * * @return 0 if success. * -EINVAL if file is incompatible or badly formatted. * -ENODEV if no handler was found for the application type or an * invalid octeon id was passed. */ int octeon_download_firmware(struct octeon_device *oct, const u8 *data, size_t size); char *lio_get_state_string(atomic_t *state_ptr); /** Sets up instruction queues for the device * @param oct which octeon to setup * * @return 0 if success. 1 if fails */ int octeon_setup_instr_queues(struct octeon_device *oct); /** Sets up output queues for the device * @param oct which octeon to setup * * @return 0 if success. 1 if fails */ int octeon_setup_output_queues(struct octeon_device *oct); int octeon_get_tx_qsize(struct octeon_device *oct, u32 q_no); int octeon_get_rx_qsize(struct octeon_device *oct, u32 q_no); /** Turns off the input and output queues for the device * @param oct which octeon to disable */ int octeon_set_io_queues_off(struct octeon_device *oct); /** Turns on or off the given output queue for the device * @param oct which octeon to change * @param q_no which queue * @param enable 1 to enable, 0 to disable */ void octeon_set_droq_pkt_op(struct octeon_device *oct, u32 q_no, u32 enable); /** Retrieve the config for the device * @param oct which octeon * @param card_type type of card * * @returns pointer to configuration */ void *oct_get_config_info(struct octeon_device *oct, u16 card_type); /** Gets the octeon device configuration * @return - pointer to the octeon configuration struture */ struct octeon_config *octeon_get_conf(struct octeon_device *oct); void octeon_free_ioq_vector(struct octeon_device *oct); int octeon_allocate_ioq_vector(struct octeon_device *oct, u32 num_ioqs); void lio_enable_irq(struct octeon_droq *droq, struct octeon_instr_queue *iq); /* LiquidIO driver pivate flags */ enum { OCT_PRIV_FLAG_TX_BYTES = 0, /* Tx interrupts by pending byte count */ }; #define OCT_PRIV_FLAG_DEFAULT 0x0 static inline u32 lio_get_priv_flag(struct octeon_device *octdev, u32 flag) { return !!(octdev->priv_flags & (0x1 << flag)); } static inline void lio_set_priv_flag(struct octeon_device *octdev, u32 flag, u32 val) { if (val) octdev->priv_flags |= (0x1 << flag); else octdev->priv_flags &= ~(0x1 << flag); } #endif