/* * Copyright (c) 2012 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * */ #include #include "mlx4_en.h" int mlx4_en_timestamp_config(struct net_device *dev, int tx_type, int rx_filter) { struct mlx4_en_priv *priv = netdev_priv(dev); struct mlx4_en_dev *mdev = priv->mdev; int port_up = 0; int err = 0; if (priv->hwtstamp_config.tx_type == tx_type && priv->hwtstamp_config.rx_filter == rx_filter) return 0; mutex_lock(&mdev->state_lock); if (priv->port_up) { port_up = 1; mlx4_en_stop_port(dev, 1); } mlx4_en_free_resources(priv); en_warn(priv, "Changing Time Stamp configuration\n"); priv->hwtstamp_config.tx_type = tx_type; priv->hwtstamp_config.rx_filter = rx_filter; if (rx_filter != HWTSTAMP_FILTER_NONE) dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX; else dev->features |= NETIF_F_HW_VLAN_CTAG_RX; err = mlx4_en_alloc_resources(priv); if (err) { en_err(priv, "Failed reallocating port resources\n"); goto out; } if (port_up) { err = mlx4_en_start_port(dev); if (err) en_err(priv, "Failed starting port\n"); } out: mutex_unlock(&mdev->state_lock); netdev_features_change(dev); return err; } /* mlx4_en_read_clock - read raw cycle counter (to be used by time counter) */ static cycle_t mlx4_en_read_clock(const struct cyclecounter *tc) { struct mlx4_en_dev *mdev = container_of(tc, struct mlx4_en_dev, cycles); struct mlx4_dev *dev = mdev->dev; return mlx4_read_clock(dev) & tc->mask; } u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe) { u64 hi, lo; struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe; lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo); hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16; return hi | lo; } void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev, struct skb_shared_hwtstamps *hwts, u64 timestamp) { unsigned long flags; u64 nsec; read_lock_irqsave(&mdev->clock_lock, flags); nsec = timecounter_cyc2time(&mdev->clock, timestamp); read_unlock_irqrestore(&mdev->clock_lock, flags); memset(hwts, 0, sizeof(struct skb_shared_hwtstamps)); hwts->hwtstamp = ns_to_ktime(nsec); } /** * mlx4_en_remove_timestamp - disable PTP device * @mdev: board private structure * * Stop the PTP support. **/ void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev) { if (mdev->ptp_clock) { ptp_clock_unregister(mdev->ptp_clock); mdev->ptp_clock = NULL; mlx4_info(mdev, "removed PHC\n"); } } void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev) { bool timeout = time_is_before_jiffies(mdev->last_overflow_check + mdev->overflow_period); unsigned long flags; if (timeout) { write_lock_irqsave(&mdev->clock_lock, flags); timecounter_read(&mdev->clock); write_unlock_irqrestore(&mdev->clock_lock, flags); mdev->last_overflow_check = jiffies; } } /** * mlx4_en_phc_adjfreq - adjust the frequency of the hardware clock * @ptp: ptp clock structure * @delta: Desired frequency change in parts per billion * * Adjust the frequency of the PHC cycle counter by the indicated delta from * the base frequency. **/ static int mlx4_en_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta) { u64 adj; u32 diff, mult; int neg_adj = 0; unsigned long flags; struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, ptp_clock_info); if (delta < 0) { neg_adj = 1; delta = -delta; } mult = mdev->nominal_c_mult; adj = mult; adj *= delta; diff = div_u64(adj, 1000000000ULL); write_lock_irqsave(&mdev->clock_lock, flags); timecounter_read(&mdev->clock); mdev->cycles.mult = neg_adj ? mult - diff : mult + diff; write_unlock_irqrestore(&mdev->clock_lock, flags); return 0; } /** * mlx4_en_phc_adjtime - Shift the time of the hardware clock * @ptp: ptp clock structure * @delta: Desired change in nanoseconds * * Adjust the timer by resetting the timecounter structure. **/ static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta) { struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, ptp_clock_info); unsigned long flags; s64 now; write_lock_irqsave(&mdev->clock_lock, flags); now = timecounter_read(&mdev->clock); now += delta; timecounter_init(&mdev->clock, &mdev->cycles, now); write_unlock_irqrestore(&mdev->clock_lock, flags); return 0; } /** * mlx4_en_phc_gettime - Reads the current time from the hardware clock * @ptp: ptp clock structure * @ts: timespec structure to hold the current time value * * Read the timecounter and return the correct value in ns after converting * it into a struct timespec. **/ static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp, struct timespec *ts) { struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, ptp_clock_info); unsigned long flags; u32 remainder; u64 ns; write_lock_irqsave(&mdev->clock_lock, flags); ns = timecounter_read(&mdev->clock); write_unlock_irqrestore(&mdev->clock_lock, flags); ts->tv_sec = div_u64_rem(ns, NSEC_PER_SEC, &remainder); ts->tv_nsec = remainder; return 0; } /** * mlx4_en_phc_settime - Set the current time on the hardware clock * @ptp: ptp clock structure * @ts: timespec containing the new time for the cycle counter * * Reset the timecounter to use a new base value instead of the kernel * wall timer value. **/ static int mlx4_en_phc_settime(struct ptp_clock_info *ptp, const struct timespec *ts) { struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev, ptp_clock_info); u64 ns = timespec_to_ns(ts); unsigned long flags; /* reset the timecounter */ write_lock_irqsave(&mdev->clock_lock, flags); timecounter_init(&mdev->clock, &mdev->cycles, ns); write_unlock_irqrestore(&mdev->clock_lock, flags); return 0; } /** * mlx4_en_phc_enable - enable or disable an ancillary feature * @ptp: ptp clock structure * @request: Desired resource to enable or disable * @on: Caller passes one to enable or zero to disable * * Enable (or disable) ancillary features of the PHC subsystem. * Currently, no ancillary features are supported. **/ static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp, struct ptp_clock_request __always_unused *request, int __always_unused on) { return -EOPNOTSUPP; } static const struct ptp_clock_info mlx4_en_ptp_clock_info = { .owner = THIS_MODULE, .max_adj = 100000000, .n_alarm = 0, .n_ext_ts = 0, .n_per_out = 0, .pps = 0, .adjfreq = mlx4_en_phc_adjfreq, .adjtime = mlx4_en_phc_adjtime, .gettime = mlx4_en_phc_gettime, .settime = mlx4_en_phc_settime, .enable = mlx4_en_phc_enable, }; void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev) { struct mlx4_dev *dev = mdev->dev; unsigned long flags; u64 ns; rwlock_init(&mdev->clock_lock); memset(&mdev->cycles, 0, sizeof(mdev->cycles)); mdev->cycles.read = mlx4_en_read_clock; mdev->cycles.mask = CLOCKSOURCE_MASK(48); /* Using shift to make calculation more accurate. Since current HW * clock frequency is 427 MHz, and cycles are given using a 48 bits * register, the biggest shift when calculating using u64, is 14 * (max_cycles * multiplier < 2^64) */ mdev->cycles.shift = 14; mdev->cycles.mult = clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift); mdev->nominal_c_mult = mdev->cycles.mult; write_lock_irqsave(&mdev->clock_lock, flags); timecounter_init(&mdev->clock, &mdev->cycles, ktime_to_ns(ktime_get_real())); write_unlock_irqrestore(&mdev->clock_lock, flags); /* Calculate period in seconds to call the overflow watchdog - to make * sure counter is checked at least once every wrap around. */ ns = cyclecounter_cyc2ns(&mdev->cycles, mdev->cycles.mask); do_div(ns, NSEC_PER_SEC / 2 / HZ); mdev->overflow_period = ns; /* Configure the PHC */ mdev->ptp_clock_info = mlx4_en_ptp_clock_info; snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp"); mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info, &mdev->pdev->dev); if (IS_ERR(mdev->ptp_clock)) { mdev->ptp_clock = NULL; mlx4_err(mdev, "ptp_clock_register failed\n"); } else { mlx4_info(mdev, "registered PHC clock\n"); } }