/* * drivers/net/ethernet/mellanox/mlxsw/reg.h * Copyright (c) 2015-2017 Mellanox Technologies. All rights reserved. * Copyright (c) 2015-2016 Ido Schimmel * Copyright (c) 2015 Elad Raz * Copyright (c) 2015-2017 Jiri Pirko * Copyright (c) 2016 Yotam Gigi * Copyright (c) 2017 Petr Machata * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _MLXSW_REG_H #define _MLXSW_REG_H #include #include #include #include "item.h" #include "port.h" struct mlxsw_reg_info { u16 id; u16 len; /* In u8 */ const char *name; }; #define MLXSW_REG_DEFINE(_name, _id, _len) \ static const struct mlxsw_reg_info mlxsw_reg_##_name = { \ .id = _id, \ .len = _len, \ .name = #_name, \ } #define MLXSW_REG(type) (&mlxsw_reg_##type) #define MLXSW_REG_LEN(type) MLXSW_REG(type)->len #define MLXSW_REG_ZERO(type, payload) memset(payload, 0, MLXSW_REG(type)->len) /* SGCR - Switch General Configuration Register * -------------------------------------------- * This register is used for configuration of the switch capabilities. */ #define MLXSW_REG_SGCR_ID 0x2000 #define MLXSW_REG_SGCR_LEN 0x10 MLXSW_REG_DEFINE(sgcr, MLXSW_REG_SGCR_ID, MLXSW_REG_SGCR_LEN); /* reg_sgcr_llb * Link Local Broadcast (Default=0) * When set, all Link Local packets (224.0.0.X) will be treated as broadcast * packets and ignore the IGMP snooping entries. * Access: RW */ MLXSW_ITEM32(reg, sgcr, llb, 0x04, 0, 1); static inline void mlxsw_reg_sgcr_pack(char *payload, bool llb) { MLXSW_REG_ZERO(sgcr, payload); mlxsw_reg_sgcr_llb_set(payload, !!llb); } /* SPAD - Switch Physical Address Register * --------------------------------------- * The SPAD register configures the switch physical MAC address. */ #define MLXSW_REG_SPAD_ID 0x2002 #define MLXSW_REG_SPAD_LEN 0x10 MLXSW_REG_DEFINE(spad, MLXSW_REG_SPAD_ID, MLXSW_REG_SPAD_LEN); /* reg_spad_base_mac * Base MAC address for the switch partitions. * Per switch partition MAC address is equal to: * base_mac + swid * Access: RW */ MLXSW_ITEM_BUF(reg, spad, base_mac, 0x02, 6); /* SMID - Switch Multicast ID * -------------------------- * The MID record maps from a MID (Multicast ID), which is a unique identifier * of the multicast group within the stacking domain, into a list of local * ports into which the packet is replicated. */ #define MLXSW_REG_SMID_ID 0x2007 #define MLXSW_REG_SMID_LEN 0x240 MLXSW_REG_DEFINE(smid, MLXSW_REG_SMID_ID, MLXSW_REG_SMID_LEN); /* reg_smid_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32(reg, smid, swid, 0x00, 24, 8); /* reg_smid_mid * Multicast identifier - global identifier that represents the multicast group * across all devices. * Access: Index */ MLXSW_ITEM32(reg, smid, mid, 0x00, 0, 16); /* reg_smid_port * Local port memebership (1 bit per port). * Access: RW */ MLXSW_ITEM_BIT_ARRAY(reg, smid, port, 0x20, 0x20, 1); /* reg_smid_port_mask * Local port mask (1 bit per port). * Access: W */ MLXSW_ITEM_BIT_ARRAY(reg, smid, port_mask, 0x220, 0x20, 1); static inline void mlxsw_reg_smid_pack(char *payload, u16 mid, u8 port, bool set) { MLXSW_REG_ZERO(smid, payload); mlxsw_reg_smid_swid_set(payload, 0); mlxsw_reg_smid_mid_set(payload, mid); mlxsw_reg_smid_port_set(payload, port, set); mlxsw_reg_smid_port_mask_set(payload, port, 1); } /* SSPR - Switch System Port Record Register * ----------------------------------------- * Configures the system port to local port mapping. */ #define MLXSW_REG_SSPR_ID 0x2008 #define MLXSW_REG_SSPR_LEN 0x8 MLXSW_REG_DEFINE(sspr, MLXSW_REG_SSPR_ID, MLXSW_REG_SSPR_LEN); /* reg_sspr_m * Master - if set, then the record describes the master system port. * This is needed in case a local port is mapped into several system ports * (for multipathing). That number will be reported as the source system * port when packets are forwarded to the CPU. Only one master port is allowed * per local port. * * Note: Must be set for Spectrum. * Access: RW */ MLXSW_ITEM32(reg, sspr, m, 0x00, 31, 1); /* reg_sspr_local_port * Local port number. * * Access: RW */ MLXSW_ITEM32(reg, sspr, local_port, 0x00, 16, 8); /* reg_sspr_sub_port * Virtual port within the physical port. * Should be set to 0 when virtual ports are not enabled on the port. * * Access: RW */ MLXSW_ITEM32(reg, sspr, sub_port, 0x00, 8, 8); /* reg_sspr_system_port * Unique identifier within the stacking domain that represents all the ports * that are available in the system (external ports). * * Currently, only single-ASIC configurations are supported, so we default to * 1:1 mapping between system ports and local ports. * Access: Index */ MLXSW_ITEM32(reg, sspr, system_port, 0x04, 0, 16); static inline void mlxsw_reg_sspr_pack(char *payload, u8 local_port) { MLXSW_REG_ZERO(sspr, payload); mlxsw_reg_sspr_m_set(payload, 1); mlxsw_reg_sspr_local_port_set(payload, local_port); mlxsw_reg_sspr_sub_port_set(payload, 0); mlxsw_reg_sspr_system_port_set(payload, local_port); } /* SFDAT - Switch Filtering Database Aging Time * -------------------------------------------- * Controls the Switch aging time. Aging time is able to be set per Switch * Partition. */ #define MLXSW_REG_SFDAT_ID 0x2009 #define MLXSW_REG_SFDAT_LEN 0x8 MLXSW_REG_DEFINE(sfdat, MLXSW_REG_SFDAT_ID, MLXSW_REG_SFDAT_LEN); /* reg_sfdat_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32(reg, sfdat, swid, 0x00, 24, 8); /* reg_sfdat_age_time * Aging time in seconds * Min - 10 seconds * Max - 1,000,000 seconds * Default is 300 seconds. * Access: RW */ MLXSW_ITEM32(reg, sfdat, age_time, 0x04, 0, 20); static inline void mlxsw_reg_sfdat_pack(char *payload, u32 age_time) { MLXSW_REG_ZERO(sfdat, payload); mlxsw_reg_sfdat_swid_set(payload, 0); mlxsw_reg_sfdat_age_time_set(payload, age_time); } /* SFD - Switch Filtering Database * ------------------------------- * The following register defines the access to the filtering database. * The register supports querying, adding, removing and modifying the database. * The access is optimized for bulk updates in which case more than one * FDB record is present in the same command. */ #define MLXSW_REG_SFD_ID 0x200A #define MLXSW_REG_SFD_BASE_LEN 0x10 /* base length, without records */ #define MLXSW_REG_SFD_REC_LEN 0x10 /* record length */ #define MLXSW_REG_SFD_REC_MAX_COUNT 64 #define MLXSW_REG_SFD_LEN (MLXSW_REG_SFD_BASE_LEN + \ MLXSW_REG_SFD_REC_LEN * MLXSW_REG_SFD_REC_MAX_COUNT) MLXSW_REG_DEFINE(sfd, MLXSW_REG_SFD_ID, MLXSW_REG_SFD_LEN); /* reg_sfd_swid * Switch partition ID for queries. Reserved on Write. * Access: Index */ MLXSW_ITEM32(reg, sfd, swid, 0x00, 24, 8); enum mlxsw_reg_sfd_op { /* Dump entire FDB a (process according to record_locator) */ MLXSW_REG_SFD_OP_QUERY_DUMP = 0, /* Query records by {MAC, VID/FID} value */ MLXSW_REG_SFD_OP_QUERY_QUERY = 1, /* Query and clear activity. Query records by {MAC, VID/FID} value */ MLXSW_REG_SFD_OP_QUERY_QUERY_AND_CLEAR_ACTIVITY = 2, /* Test. Response indicates if each of the records could be * added to the FDB. */ MLXSW_REG_SFD_OP_WRITE_TEST = 0, /* Add/modify. Aged-out records cannot be added. This command removes * the learning notification of the {MAC, VID/FID}. Response includes * the entries that were added to the FDB. */ MLXSW_REG_SFD_OP_WRITE_EDIT = 1, /* Remove record by {MAC, VID/FID}. This command also removes * the learning notification and aged-out notifications * of the {MAC, VID/FID}. The response provides current (pre-removal) * entries as non-aged-out. */ MLXSW_REG_SFD_OP_WRITE_REMOVE = 2, /* Remove learned notification by {MAC, VID/FID}. The response provides * the removed learning notification. */ MLXSW_REG_SFD_OP_WRITE_REMOVE_NOTIFICATION = 2, }; /* reg_sfd_op * Operation. * Access: OP */ MLXSW_ITEM32(reg, sfd, op, 0x04, 30, 2); /* reg_sfd_record_locator * Used for querying the FDB. Use record_locator=0 to initiate the * query. When a record is returned, a new record_locator is * returned to be used in the subsequent query. * Reserved for database update. * Access: Index */ MLXSW_ITEM32(reg, sfd, record_locator, 0x04, 0, 30); /* reg_sfd_num_rec * Request: Number of records to read/add/modify/remove * Response: Number of records read/added/replaced/removed * See above description for more details. * Ranges 0..64 * Access: RW */ MLXSW_ITEM32(reg, sfd, num_rec, 0x08, 0, 8); static inline void mlxsw_reg_sfd_pack(char *payload, enum mlxsw_reg_sfd_op op, u32 record_locator) { MLXSW_REG_ZERO(sfd, payload); mlxsw_reg_sfd_op_set(payload, op); mlxsw_reg_sfd_record_locator_set(payload, record_locator); } /* reg_sfd_rec_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, sfd, rec_swid, MLXSW_REG_SFD_BASE_LEN, 24, 8, MLXSW_REG_SFD_REC_LEN, 0x00, false); enum mlxsw_reg_sfd_rec_type { MLXSW_REG_SFD_REC_TYPE_UNICAST = 0x0, MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG = 0x1, MLXSW_REG_SFD_REC_TYPE_MULTICAST = 0x2, }; /* reg_sfd_rec_type * FDB record type. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, rec_type, MLXSW_REG_SFD_BASE_LEN, 20, 4, MLXSW_REG_SFD_REC_LEN, 0x00, false); enum mlxsw_reg_sfd_rec_policy { /* Replacement disabled, aging disabled. */ MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY = 0, /* (mlag remote): Replacement enabled, aging disabled, * learning notification enabled on this port. */ MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG = 1, /* (ingress device): Replacement enabled, aging enabled. */ MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS = 3, }; /* reg_sfd_rec_policy * Policy. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, rec_policy, MLXSW_REG_SFD_BASE_LEN, 18, 2, MLXSW_REG_SFD_REC_LEN, 0x00, false); /* reg_sfd_rec_a * Activity. Set for new static entries. Set for static entries if a frame SMAC * lookup hits on the entry. * To clear the a bit, use "query and clear activity" op. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfd, rec_a, MLXSW_REG_SFD_BASE_LEN, 16, 1, MLXSW_REG_SFD_REC_LEN, 0x00, false); /* reg_sfd_rec_mac * MAC address. * Access: Index */ MLXSW_ITEM_BUF_INDEXED(reg, sfd, rec_mac, MLXSW_REG_SFD_BASE_LEN, 6, MLXSW_REG_SFD_REC_LEN, 0x02); enum mlxsw_reg_sfd_rec_action { /* forward */ MLXSW_REG_SFD_REC_ACTION_NOP = 0, /* forward and trap, trap_id is FDB_TRAP */ MLXSW_REG_SFD_REC_ACTION_MIRROR_TO_CPU = 1, /* trap and do not forward, trap_id is FDB_TRAP */ MLXSW_REG_SFD_REC_ACTION_TRAP = 2, /* forward to IP router */ MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER = 3, MLXSW_REG_SFD_REC_ACTION_DISCARD_ERROR = 15, }; /* reg_sfd_rec_action * Action to apply on the packet. * Note: Dynamic entries can only be configured with NOP action. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, rec_action, MLXSW_REG_SFD_BASE_LEN, 28, 4, MLXSW_REG_SFD_REC_LEN, 0x0C, false); /* reg_sfd_uc_sub_port * VEPA channel on local port. * Valid only if local port is a non-stacking port. Must be 0 if multichannel * VEPA is not enabled. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8, MLXSW_REG_SFD_REC_LEN, 0x08, false); /* reg_sfd_uc_fid_vid * Filtering ID or VLAN ID * For SwitchX and SwitchX-2: * - Dynamic entries (policy 2,3) use FID * - Static entries (policy 0) use VID * - When independent learning is configured, VID=FID * For Spectrum: use FID for both Dynamic and Static entries. * VID should not be used. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16, MLXSW_REG_SFD_REC_LEN, 0x08, false); /* reg_sfd_uc_system_port * Unique port identifier for the final destination of the packet. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_system_port, MLXSW_REG_SFD_BASE_LEN, 0, 16, MLXSW_REG_SFD_REC_LEN, 0x0C, false); static inline void mlxsw_reg_sfd_rec_pack(char *payload, int rec_index, enum mlxsw_reg_sfd_rec_type rec_type, const char *mac, enum mlxsw_reg_sfd_rec_action action) { u8 num_rec = mlxsw_reg_sfd_num_rec_get(payload); if (rec_index >= num_rec) mlxsw_reg_sfd_num_rec_set(payload, rec_index + 1); mlxsw_reg_sfd_rec_swid_set(payload, rec_index, 0); mlxsw_reg_sfd_rec_type_set(payload, rec_index, rec_type); mlxsw_reg_sfd_rec_mac_memcpy_to(payload, rec_index, mac); mlxsw_reg_sfd_rec_action_set(payload, rec_index, action); } static inline void mlxsw_reg_sfd_uc_pack(char *payload, int rec_index, enum mlxsw_reg_sfd_rec_policy policy, const char *mac, u16 fid_vid, enum mlxsw_reg_sfd_rec_action action, u8 local_port) { mlxsw_reg_sfd_rec_pack(payload, rec_index, MLXSW_REG_SFD_REC_TYPE_UNICAST, mac, action); mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy); mlxsw_reg_sfd_uc_sub_port_set(payload, rec_index, 0); mlxsw_reg_sfd_uc_fid_vid_set(payload, rec_index, fid_vid); mlxsw_reg_sfd_uc_system_port_set(payload, rec_index, local_port); } static inline void mlxsw_reg_sfd_uc_unpack(char *payload, int rec_index, char *mac, u16 *p_fid_vid, u8 *p_local_port) { mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac); *p_fid_vid = mlxsw_reg_sfd_uc_fid_vid_get(payload, rec_index); *p_local_port = mlxsw_reg_sfd_uc_system_port_get(payload, rec_index); } /* reg_sfd_uc_lag_sub_port * LAG sub port. * Must be 0 if multichannel VEPA is not enabled. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8, MLXSW_REG_SFD_REC_LEN, 0x08, false); /* reg_sfd_uc_lag_fid_vid * Filtering ID or VLAN ID * For SwitchX and SwitchX-2: * - Dynamic entries (policy 2,3) use FID * - Static entries (policy 0) use VID * - When independent learning is configured, VID=FID * For Spectrum: use FID for both Dynamic and Static entries. * VID should not be used. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16, MLXSW_REG_SFD_REC_LEN, 0x08, false); /* reg_sfd_uc_lag_lag_vid * Indicates VID in case of vFIDs. Reserved for FIDs. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_lag_vid, MLXSW_REG_SFD_BASE_LEN, 16, 12, MLXSW_REG_SFD_REC_LEN, 0x0C, false); /* reg_sfd_uc_lag_lag_id * LAG Identifier - pointer into the LAG descriptor table. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, uc_lag_lag_id, MLXSW_REG_SFD_BASE_LEN, 0, 10, MLXSW_REG_SFD_REC_LEN, 0x0C, false); static inline void mlxsw_reg_sfd_uc_lag_pack(char *payload, int rec_index, enum mlxsw_reg_sfd_rec_policy policy, const char *mac, u16 fid_vid, enum mlxsw_reg_sfd_rec_action action, u16 lag_vid, u16 lag_id) { mlxsw_reg_sfd_rec_pack(payload, rec_index, MLXSW_REG_SFD_REC_TYPE_UNICAST_LAG, mac, action); mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy); mlxsw_reg_sfd_uc_lag_sub_port_set(payload, rec_index, 0); mlxsw_reg_sfd_uc_lag_fid_vid_set(payload, rec_index, fid_vid); mlxsw_reg_sfd_uc_lag_lag_vid_set(payload, rec_index, lag_vid); mlxsw_reg_sfd_uc_lag_lag_id_set(payload, rec_index, lag_id); } static inline void mlxsw_reg_sfd_uc_lag_unpack(char *payload, int rec_index, char *mac, u16 *p_vid, u16 *p_lag_id) { mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac); *p_vid = mlxsw_reg_sfd_uc_lag_fid_vid_get(payload, rec_index); *p_lag_id = mlxsw_reg_sfd_uc_lag_lag_id_get(payload, rec_index); } /* reg_sfd_mc_pgi * * Multicast port group index - index into the port group table. * Value 0x1FFF indicates the pgi should point to the MID entry. * For Spectrum this value must be set to 0x1FFF * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, mc_pgi, MLXSW_REG_SFD_BASE_LEN, 16, 13, MLXSW_REG_SFD_REC_LEN, 0x08, false); /* reg_sfd_mc_fid_vid * * Filtering ID or VLAN ID * Access: Index */ MLXSW_ITEM32_INDEXED(reg, sfd, mc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16, MLXSW_REG_SFD_REC_LEN, 0x08, false); /* reg_sfd_mc_mid * * Multicast identifier - global identifier that represents the multicast * group across all devices. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sfd, mc_mid, MLXSW_REG_SFD_BASE_LEN, 0, 16, MLXSW_REG_SFD_REC_LEN, 0x0C, false); static inline void mlxsw_reg_sfd_mc_pack(char *payload, int rec_index, const char *mac, u16 fid_vid, enum mlxsw_reg_sfd_rec_action action, u16 mid) { mlxsw_reg_sfd_rec_pack(payload, rec_index, MLXSW_REG_SFD_REC_TYPE_MULTICAST, mac, action); mlxsw_reg_sfd_mc_pgi_set(payload, rec_index, 0x1FFF); mlxsw_reg_sfd_mc_fid_vid_set(payload, rec_index, fid_vid); mlxsw_reg_sfd_mc_mid_set(payload, rec_index, mid); } /* SFN - Switch FDB Notification Register * ------------------------------------------- * The switch provides notifications on newly learned FDB entries and * aged out entries. The notifications can be polled by software. */ #define MLXSW_REG_SFN_ID 0x200B #define MLXSW_REG_SFN_BASE_LEN 0x10 /* base length, without records */ #define MLXSW_REG_SFN_REC_LEN 0x10 /* record length */ #define MLXSW_REG_SFN_REC_MAX_COUNT 64 #define MLXSW_REG_SFN_LEN (MLXSW_REG_SFN_BASE_LEN + \ MLXSW_REG_SFN_REC_LEN * MLXSW_REG_SFN_REC_MAX_COUNT) MLXSW_REG_DEFINE(sfn, MLXSW_REG_SFN_ID, MLXSW_REG_SFN_LEN); /* reg_sfn_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32(reg, sfn, swid, 0x00, 24, 8); /* reg_sfn_end * Forces the current session to end. * Access: OP */ MLXSW_ITEM32(reg, sfn, end, 0x04, 20, 1); /* reg_sfn_num_rec * Request: Number of learned notifications and aged-out notification * records requested. * Response: Number of notification records returned (must be smaller * than or equal to the value requested) * Ranges 0..64 * Access: OP */ MLXSW_ITEM32(reg, sfn, num_rec, 0x04, 0, 8); static inline void mlxsw_reg_sfn_pack(char *payload) { MLXSW_REG_ZERO(sfn, payload); mlxsw_reg_sfn_swid_set(payload, 0); mlxsw_reg_sfn_end_set(payload, 1); mlxsw_reg_sfn_num_rec_set(payload, MLXSW_REG_SFN_REC_MAX_COUNT); } /* reg_sfn_rec_swid * Switch partition ID. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfn, rec_swid, MLXSW_REG_SFN_BASE_LEN, 24, 8, MLXSW_REG_SFN_REC_LEN, 0x00, false); enum mlxsw_reg_sfn_rec_type { /* MAC addresses learned on a regular port. */ MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC = 0x5, /* MAC addresses learned on a LAG port. */ MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC_LAG = 0x6, /* Aged-out MAC address on a regular port. */ MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC = 0x7, /* Aged-out MAC address on a LAG port. */ MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC_LAG = 0x8, }; /* reg_sfn_rec_type * Notification record type. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfn, rec_type, MLXSW_REG_SFN_BASE_LEN, 20, 4, MLXSW_REG_SFN_REC_LEN, 0x00, false); /* reg_sfn_rec_mac * MAC address. * Access: RO */ MLXSW_ITEM_BUF_INDEXED(reg, sfn, rec_mac, MLXSW_REG_SFN_BASE_LEN, 6, MLXSW_REG_SFN_REC_LEN, 0x02); /* reg_sfn_mac_sub_port * VEPA channel on the local port. * 0 if multichannel VEPA is not enabled. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfn, mac_sub_port, MLXSW_REG_SFN_BASE_LEN, 16, 8, MLXSW_REG_SFN_REC_LEN, 0x08, false); /* reg_sfn_mac_fid * Filtering identifier. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfn, mac_fid, MLXSW_REG_SFN_BASE_LEN, 0, 16, MLXSW_REG_SFN_REC_LEN, 0x08, false); /* reg_sfn_mac_system_port * Unique port identifier for the final destination of the packet. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfn, mac_system_port, MLXSW_REG_SFN_BASE_LEN, 0, 16, MLXSW_REG_SFN_REC_LEN, 0x0C, false); static inline void mlxsw_reg_sfn_mac_unpack(char *payload, int rec_index, char *mac, u16 *p_vid, u8 *p_local_port) { mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac); *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index); *p_local_port = mlxsw_reg_sfn_mac_system_port_get(payload, rec_index); } /* reg_sfn_mac_lag_lag_id * LAG ID (pointer into the LAG descriptor table). * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sfn, mac_lag_lag_id, MLXSW_REG_SFN_BASE_LEN, 0, 10, MLXSW_REG_SFN_REC_LEN, 0x0C, false); static inline void mlxsw_reg_sfn_mac_lag_unpack(char *payload, int rec_index, char *mac, u16 *p_vid, u16 *p_lag_id) { mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac); *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index); *p_lag_id = mlxsw_reg_sfn_mac_lag_lag_id_get(payload, rec_index); } /* SPMS - Switch Port MSTP/RSTP State Register * ------------------------------------------- * Configures the spanning tree state of a physical port. */ #define MLXSW_REG_SPMS_ID 0x200D #define MLXSW_REG_SPMS_LEN 0x404 MLXSW_REG_DEFINE(spms, MLXSW_REG_SPMS_ID, MLXSW_REG_SPMS_LEN); /* reg_spms_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, spms, local_port, 0x00, 16, 8); enum mlxsw_reg_spms_state { MLXSW_REG_SPMS_STATE_NO_CHANGE, MLXSW_REG_SPMS_STATE_DISCARDING, MLXSW_REG_SPMS_STATE_LEARNING, MLXSW_REG_SPMS_STATE_FORWARDING, }; /* reg_spms_state * Spanning tree state of each VLAN ID (VID) of the local port. * 0 - Do not change spanning tree state (used only when writing). * 1 - Discarding. No learning or forwarding to/from this port (default). * 2 - Learning. Port is learning, but not forwarding. * 3 - Forwarding. Port is learning and forwarding. * Access: RW */ MLXSW_ITEM_BIT_ARRAY(reg, spms, state, 0x04, 0x400, 2); static inline void mlxsw_reg_spms_pack(char *payload, u8 local_port) { MLXSW_REG_ZERO(spms, payload); mlxsw_reg_spms_local_port_set(payload, local_port); } static inline void mlxsw_reg_spms_vid_pack(char *payload, u16 vid, enum mlxsw_reg_spms_state state) { mlxsw_reg_spms_state_set(payload, vid, state); } /* SPVID - Switch Port VID * ----------------------- * The switch port VID configures the default VID for a port. */ #define MLXSW_REG_SPVID_ID 0x200E #define MLXSW_REG_SPVID_LEN 0x08 MLXSW_REG_DEFINE(spvid, MLXSW_REG_SPVID_ID, MLXSW_REG_SPVID_LEN); /* reg_spvid_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8); /* reg_spvid_sub_port * Virtual port within the physical port. * Should be set to 0 when virtual ports are not enabled on the port. * Access: Index */ MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8); /* reg_spvid_pvid * Port default VID * Access: RW */ MLXSW_ITEM32(reg, spvid, pvid, 0x04, 0, 12); static inline void mlxsw_reg_spvid_pack(char *payload, u8 local_port, u16 pvid) { MLXSW_REG_ZERO(spvid, payload); mlxsw_reg_spvid_local_port_set(payload, local_port); mlxsw_reg_spvid_pvid_set(payload, pvid); } /* SPVM - Switch Port VLAN Membership * ---------------------------------- * The Switch Port VLAN Membership register configures the VLAN membership * of a port in a VLAN denoted by VID. VLAN membership is managed per * virtual port. The register can be used to add and remove VID(s) from a port. */ #define MLXSW_REG_SPVM_ID 0x200F #define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */ #define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */ #define MLXSW_REG_SPVM_REC_MAX_COUNT 255 #define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN + \ MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT) MLXSW_REG_DEFINE(spvm, MLXSW_REG_SPVM_ID, MLXSW_REG_SPVM_LEN); /* reg_spvm_pt * Priority tagged. If this bit is set, packets forwarded to the port with * untagged VLAN membership (u bit is set) will be tagged with priority tag * (VID=0) * Access: RW */ MLXSW_ITEM32(reg, spvm, pt, 0x00, 31, 1); /* reg_spvm_pte * Priority Tagged Update Enable. On Write operations, if this bit is cleared, * the pt bit will NOT be updated. To update the pt bit, pte must be set. * Access: WO */ MLXSW_ITEM32(reg, spvm, pte, 0x00, 30, 1); /* reg_spvm_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, spvm, local_port, 0x00, 16, 8); /* reg_spvm_sub_port * Virtual port within the physical port. * Should be set to 0 when virtual ports are not enabled on the port. * Access: Index */ MLXSW_ITEM32(reg, spvm, sub_port, 0x00, 8, 8); /* reg_spvm_num_rec * Number of records to update. Each record contains: i, e, u, vid. * Access: OP */ MLXSW_ITEM32(reg, spvm, num_rec, 0x00, 0, 8); /* reg_spvm_rec_i * Ingress membership in VLAN ID. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, spvm, rec_i, MLXSW_REG_SPVM_BASE_LEN, 14, 1, MLXSW_REG_SPVM_REC_LEN, 0, false); /* reg_spvm_rec_e * Egress membership in VLAN ID. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, spvm, rec_e, MLXSW_REG_SPVM_BASE_LEN, 13, 1, MLXSW_REG_SPVM_REC_LEN, 0, false); /* reg_spvm_rec_u * Untagged - port is an untagged member - egress transmission uses untagged * frames on VID * Access: Index */ MLXSW_ITEM32_INDEXED(reg, spvm, rec_u, MLXSW_REG_SPVM_BASE_LEN, 12, 1, MLXSW_REG_SPVM_REC_LEN, 0, false); /* reg_spvm_rec_vid * Egress membership in VLAN ID. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, spvm, rec_vid, MLXSW_REG_SPVM_BASE_LEN, 0, 12, MLXSW_REG_SPVM_REC_LEN, 0, false); static inline void mlxsw_reg_spvm_pack(char *payload, u8 local_port, u16 vid_begin, u16 vid_end, bool is_member, bool untagged) { int size = vid_end - vid_begin + 1; int i; MLXSW_REG_ZERO(spvm, payload); mlxsw_reg_spvm_local_port_set(payload, local_port); mlxsw_reg_spvm_num_rec_set(payload, size); for (i = 0; i < size; i++) { mlxsw_reg_spvm_rec_i_set(payload, i, is_member); mlxsw_reg_spvm_rec_e_set(payload, i, is_member); mlxsw_reg_spvm_rec_u_set(payload, i, untagged); mlxsw_reg_spvm_rec_vid_set(payload, i, vid_begin + i); } } /* SPAFT - Switch Port Acceptable Frame Types * ------------------------------------------ * The Switch Port Acceptable Frame Types register configures the frame * admittance of the port. */ #define MLXSW_REG_SPAFT_ID 0x2010 #define MLXSW_REG_SPAFT_LEN 0x08 MLXSW_REG_DEFINE(spaft, MLXSW_REG_SPAFT_ID, MLXSW_REG_SPAFT_LEN); /* reg_spaft_local_port * Local port number. * Access: Index * * Note: CPU port is not supported (all tag types are allowed). */ MLXSW_ITEM32(reg, spaft, local_port, 0x00, 16, 8); /* reg_spaft_sub_port * Virtual port within the physical port. * Should be set to 0 when virtual ports are not enabled on the port. * Access: RW */ MLXSW_ITEM32(reg, spaft, sub_port, 0x00, 8, 8); /* reg_spaft_allow_untagged * When set, untagged frames on the ingress are allowed (default). * Access: RW */ MLXSW_ITEM32(reg, spaft, allow_untagged, 0x04, 31, 1); /* reg_spaft_allow_prio_tagged * When set, priority tagged frames on the ingress are allowed (default). * Access: RW */ MLXSW_ITEM32(reg, spaft, allow_prio_tagged, 0x04, 30, 1); /* reg_spaft_allow_tagged * When set, tagged frames on the ingress are allowed (default). * Access: RW */ MLXSW_ITEM32(reg, spaft, allow_tagged, 0x04, 29, 1); static inline void mlxsw_reg_spaft_pack(char *payload, u8 local_port, bool allow_untagged) { MLXSW_REG_ZERO(spaft, payload); mlxsw_reg_spaft_local_port_set(payload, local_port); mlxsw_reg_spaft_allow_untagged_set(payload, allow_untagged); mlxsw_reg_spaft_allow_prio_tagged_set(payload, true); mlxsw_reg_spaft_allow_tagged_set(payload, true); } /* SFGC - Switch Flooding Group Configuration * ------------------------------------------ * The following register controls the association of flooding tables and MIDs * to packet types used for flooding. */ #define MLXSW_REG_SFGC_ID 0x2011 #define MLXSW_REG_SFGC_LEN 0x10 MLXSW_REG_DEFINE(sfgc, MLXSW_REG_SFGC_ID, MLXSW_REG_SFGC_LEN); enum mlxsw_reg_sfgc_type { MLXSW_REG_SFGC_TYPE_BROADCAST, MLXSW_REG_SFGC_TYPE_UNKNOWN_UNICAST, MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV4, MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV6, MLXSW_REG_SFGC_TYPE_RESERVED, MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_NON_IP, MLXSW_REG_SFGC_TYPE_IPV4_LINK_LOCAL, MLXSW_REG_SFGC_TYPE_IPV6_ALL_HOST, MLXSW_REG_SFGC_TYPE_MAX, }; /* reg_sfgc_type * The traffic type to reach the flooding table. * Access: Index */ MLXSW_ITEM32(reg, sfgc, type, 0x00, 0, 4); enum mlxsw_reg_sfgc_bridge_type { MLXSW_REG_SFGC_BRIDGE_TYPE_1Q_FID = 0, MLXSW_REG_SFGC_BRIDGE_TYPE_VFID = 1, }; /* reg_sfgc_bridge_type * Access: Index * * Note: SwitchX-2 only supports 802.1Q mode. */ MLXSW_ITEM32(reg, sfgc, bridge_type, 0x04, 24, 3); enum mlxsw_flood_table_type { MLXSW_REG_SFGC_TABLE_TYPE_VID = 1, MLXSW_REG_SFGC_TABLE_TYPE_SINGLE = 2, MLXSW_REG_SFGC_TABLE_TYPE_ANY = 0, MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFSET = 3, MLXSW_REG_SFGC_TABLE_TYPE_FID = 4, }; /* reg_sfgc_table_type * See mlxsw_flood_table_type * Access: RW * * Note: FID offset and FID types are not supported in SwitchX-2. */ MLXSW_ITEM32(reg, sfgc, table_type, 0x04, 16, 3); /* reg_sfgc_flood_table * Flooding table index to associate with the specific type on the specific * switch partition. * Access: RW */ MLXSW_ITEM32(reg, sfgc, flood_table, 0x04, 0, 6); /* reg_sfgc_mid * The multicast ID for the swid. Not supported for Spectrum * Access: RW */ MLXSW_ITEM32(reg, sfgc, mid, 0x08, 0, 16); /* reg_sfgc_counter_set_type * Counter Set Type for flow counters. * Access: RW */ MLXSW_ITEM32(reg, sfgc, counter_set_type, 0x0C, 24, 8); /* reg_sfgc_counter_index * Counter Index for flow counters. * Access: RW */ MLXSW_ITEM32(reg, sfgc, counter_index, 0x0C, 0, 24); static inline void mlxsw_reg_sfgc_pack(char *payload, enum mlxsw_reg_sfgc_type type, enum mlxsw_reg_sfgc_bridge_type bridge_type, enum mlxsw_flood_table_type table_type, unsigned int flood_table) { MLXSW_REG_ZERO(sfgc, payload); mlxsw_reg_sfgc_type_set(payload, type); mlxsw_reg_sfgc_bridge_type_set(payload, bridge_type); mlxsw_reg_sfgc_table_type_set(payload, table_type); mlxsw_reg_sfgc_flood_table_set(payload, flood_table); mlxsw_reg_sfgc_mid_set(payload, MLXSW_PORT_MID); } /* SFTR - Switch Flooding Table Register * ------------------------------------- * The switch flooding table is used for flooding packet replication. The table * defines a bit mask of ports for packet replication. */ #define MLXSW_REG_SFTR_ID 0x2012 #define MLXSW_REG_SFTR_LEN 0x420 MLXSW_REG_DEFINE(sftr, MLXSW_REG_SFTR_ID, MLXSW_REG_SFTR_LEN); /* reg_sftr_swid * Switch partition ID with which to associate the port. * Access: Index */ MLXSW_ITEM32(reg, sftr, swid, 0x00, 24, 8); /* reg_sftr_flood_table * Flooding table index to associate with the specific type on the specific * switch partition. * Access: Index */ MLXSW_ITEM32(reg, sftr, flood_table, 0x00, 16, 6); /* reg_sftr_index * Index. Used as an index into the Flooding Table in case the table is * configured to use VID / FID or FID Offset. * Access: Index */ MLXSW_ITEM32(reg, sftr, index, 0x00, 0, 16); /* reg_sftr_table_type * See mlxsw_flood_table_type * Access: RW */ MLXSW_ITEM32(reg, sftr, table_type, 0x04, 16, 3); /* reg_sftr_range * Range of entries to update * Access: Index */ MLXSW_ITEM32(reg, sftr, range, 0x04, 0, 16); /* reg_sftr_port * Local port membership (1 bit per port). * Access: RW */ MLXSW_ITEM_BIT_ARRAY(reg, sftr, port, 0x20, 0x20, 1); /* reg_sftr_cpu_port_mask * CPU port mask (1 bit per port). * Access: W */ MLXSW_ITEM_BIT_ARRAY(reg, sftr, port_mask, 0x220, 0x20, 1); static inline void mlxsw_reg_sftr_pack(char *payload, unsigned int flood_table, unsigned int index, enum mlxsw_flood_table_type table_type, unsigned int range, u8 port, bool set) { MLXSW_REG_ZERO(sftr, payload); mlxsw_reg_sftr_swid_set(payload, 0); mlxsw_reg_sftr_flood_table_set(payload, flood_table); mlxsw_reg_sftr_index_set(payload, index); mlxsw_reg_sftr_table_type_set(payload, table_type); mlxsw_reg_sftr_range_set(payload, range); mlxsw_reg_sftr_port_set(payload, port, set); mlxsw_reg_sftr_port_mask_set(payload, port, 1); } /* SFDF - Switch Filtering DB Flush * -------------------------------- * The switch filtering DB flush register is used to flush the FDB. * Note that FDB notifications are flushed as well. */ #define MLXSW_REG_SFDF_ID 0x2013 #define MLXSW_REG_SFDF_LEN 0x14 MLXSW_REG_DEFINE(sfdf, MLXSW_REG_SFDF_ID, MLXSW_REG_SFDF_LEN); /* reg_sfdf_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32(reg, sfdf, swid, 0x00, 24, 8); enum mlxsw_reg_sfdf_flush_type { MLXSW_REG_SFDF_FLUSH_PER_SWID, MLXSW_REG_SFDF_FLUSH_PER_FID, MLXSW_REG_SFDF_FLUSH_PER_PORT, MLXSW_REG_SFDF_FLUSH_PER_PORT_AND_FID, MLXSW_REG_SFDF_FLUSH_PER_LAG, MLXSW_REG_SFDF_FLUSH_PER_LAG_AND_FID, }; /* reg_sfdf_flush_type * Flush type. * 0 - All SWID dynamic entries are flushed. * 1 - All FID dynamic entries are flushed. * 2 - All dynamic entries pointing to port are flushed. * 3 - All FID dynamic entries pointing to port are flushed. * 4 - All dynamic entries pointing to LAG are flushed. * 5 - All FID dynamic entries pointing to LAG are flushed. * Access: RW */ MLXSW_ITEM32(reg, sfdf, flush_type, 0x04, 28, 4); /* reg_sfdf_flush_static * Static. * 0 - Flush only dynamic entries. * 1 - Flush both dynamic and static entries. * Access: RW */ MLXSW_ITEM32(reg, sfdf, flush_static, 0x04, 24, 1); static inline void mlxsw_reg_sfdf_pack(char *payload, enum mlxsw_reg_sfdf_flush_type type) { MLXSW_REG_ZERO(sfdf, payload); mlxsw_reg_sfdf_flush_type_set(payload, type); mlxsw_reg_sfdf_flush_static_set(payload, true); } /* reg_sfdf_fid * FID to flush. * Access: RW */ MLXSW_ITEM32(reg, sfdf, fid, 0x0C, 0, 16); /* reg_sfdf_system_port * Port to flush. * Access: RW */ MLXSW_ITEM32(reg, sfdf, system_port, 0x0C, 0, 16); /* reg_sfdf_port_fid_system_port * Port to flush, pointed to by FID. * Access: RW */ MLXSW_ITEM32(reg, sfdf, port_fid_system_port, 0x08, 0, 16); /* reg_sfdf_lag_id * LAG ID to flush. * Access: RW */ MLXSW_ITEM32(reg, sfdf, lag_id, 0x0C, 0, 10); /* reg_sfdf_lag_fid_lag_id * LAG ID to flush, pointed to by FID. * Access: RW */ MLXSW_ITEM32(reg, sfdf, lag_fid_lag_id, 0x08, 0, 10); /* SLDR - Switch LAG Descriptor Register * ----------------------------------------- * The switch LAG descriptor register is populated by LAG descriptors. * Each LAG descriptor is indexed by lag_id. The LAG ID runs from 0 to * max_lag-1. */ #define MLXSW_REG_SLDR_ID 0x2014 #define MLXSW_REG_SLDR_LEN 0x0C /* counting in only one port in list */ MLXSW_REG_DEFINE(sldr, MLXSW_REG_SLDR_ID, MLXSW_REG_SLDR_LEN); enum mlxsw_reg_sldr_op { /* Indicates a creation of a new LAG-ID, lag_id must be valid */ MLXSW_REG_SLDR_OP_LAG_CREATE, MLXSW_REG_SLDR_OP_LAG_DESTROY, /* Ports that appear in the list have the Distributor enabled */ MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST, /* Removes ports from the disributor list */ MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST, }; /* reg_sldr_op * Operation. * Access: RW */ MLXSW_ITEM32(reg, sldr, op, 0x00, 29, 3); /* reg_sldr_lag_id * LAG identifier. The lag_id is the index into the LAG descriptor table. * Access: Index */ MLXSW_ITEM32(reg, sldr, lag_id, 0x00, 0, 10); static inline void mlxsw_reg_sldr_lag_create_pack(char *payload, u8 lag_id) { MLXSW_REG_ZERO(sldr, payload); mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_CREATE); mlxsw_reg_sldr_lag_id_set(payload, lag_id); } static inline void mlxsw_reg_sldr_lag_destroy_pack(char *payload, u8 lag_id) { MLXSW_REG_ZERO(sldr, payload); mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_DESTROY); mlxsw_reg_sldr_lag_id_set(payload, lag_id); } /* reg_sldr_num_ports * The number of member ports of the LAG. * Reserved for Create / Destroy operations * For Add / Remove operations - indicates the number of ports in the list. * Access: RW */ MLXSW_ITEM32(reg, sldr, num_ports, 0x04, 24, 8); /* reg_sldr_system_port * System port. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, sldr, system_port, 0x08, 0, 16, 4, 0, false); static inline void mlxsw_reg_sldr_lag_add_port_pack(char *payload, u8 lag_id, u8 local_port) { MLXSW_REG_ZERO(sldr, payload); mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_ADD_PORT_LIST); mlxsw_reg_sldr_lag_id_set(payload, lag_id); mlxsw_reg_sldr_num_ports_set(payload, 1); mlxsw_reg_sldr_system_port_set(payload, 0, local_port); } static inline void mlxsw_reg_sldr_lag_remove_port_pack(char *payload, u8 lag_id, u8 local_port) { MLXSW_REG_ZERO(sldr, payload); mlxsw_reg_sldr_op_set(payload, MLXSW_REG_SLDR_OP_LAG_REMOVE_PORT_LIST); mlxsw_reg_sldr_lag_id_set(payload, lag_id); mlxsw_reg_sldr_num_ports_set(payload, 1); mlxsw_reg_sldr_system_port_set(payload, 0, local_port); } /* SLCR - Switch LAG Configuration 2 Register * ------------------------------------------- * The Switch LAG Configuration register is used for configuring the * LAG properties of the switch. */ #define MLXSW_REG_SLCR_ID 0x2015 #define MLXSW_REG_SLCR_LEN 0x10 MLXSW_REG_DEFINE(slcr, MLXSW_REG_SLCR_ID, MLXSW_REG_SLCR_LEN); enum mlxsw_reg_slcr_pp { /* Global Configuration (for all ports) */ MLXSW_REG_SLCR_PP_GLOBAL, /* Per port configuration, based on local_port field */ MLXSW_REG_SLCR_PP_PER_PORT, }; /* reg_slcr_pp * Per Port Configuration * Note: Reading at Global mode results in reading port 1 configuration. * Access: Index */ MLXSW_ITEM32(reg, slcr, pp, 0x00, 24, 1); /* reg_slcr_local_port * Local port number * Supported from CPU port * Not supported from router port * Reserved when pp = Global Configuration * Access: Index */ MLXSW_ITEM32(reg, slcr, local_port, 0x00, 16, 8); enum mlxsw_reg_slcr_type { MLXSW_REG_SLCR_TYPE_CRC, /* default */ MLXSW_REG_SLCR_TYPE_XOR, MLXSW_REG_SLCR_TYPE_RANDOM, }; /* reg_slcr_type * Hash type * Access: RW */ MLXSW_ITEM32(reg, slcr, type, 0x00, 0, 4); /* Ingress port */ #define MLXSW_REG_SLCR_LAG_HASH_IN_PORT BIT(0) /* SMAC - for IPv4 and IPv6 packets */ #define MLXSW_REG_SLCR_LAG_HASH_SMAC_IP BIT(1) /* SMAC - for non-IP packets */ #define MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP BIT(2) #define MLXSW_REG_SLCR_LAG_HASH_SMAC \ (MLXSW_REG_SLCR_LAG_HASH_SMAC_IP | \ MLXSW_REG_SLCR_LAG_HASH_SMAC_NONIP) /* DMAC - for IPv4 and IPv6 packets */ #define MLXSW_REG_SLCR_LAG_HASH_DMAC_IP BIT(3) /* DMAC - for non-IP packets */ #define MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP BIT(4) #define MLXSW_REG_SLCR_LAG_HASH_DMAC \ (MLXSW_REG_SLCR_LAG_HASH_DMAC_IP | \ MLXSW_REG_SLCR_LAG_HASH_DMAC_NONIP) /* Ethertype - for IPv4 and IPv6 packets */ #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP BIT(5) /* Ethertype - for non-IP packets */ #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP BIT(6) #define MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE \ (MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_IP | \ MLXSW_REG_SLCR_LAG_HASH_ETHERTYPE_NONIP) /* VLAN ID - for IPv4 and IPv6 packets */ #define MLXSW_REG_SLCR_LAG_HASH_VLANID_IP BIT(7) /* VLAN ID - for non-IP packets */ #define MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP BIT(8) #define MLXSW_REG_SLCR_LAG_HASH_VLANID \ (MLXSW_REG_SLCR_LAG_HASH_VLANID_IP | \ MLXSW_REG_SLCR_LAG_HASH_VLANID_NONIP) /* Source IP address (can be IPv4 or IPv6) */ #define MLXSW_REG_SLCR_LAG_HASH_SIP BIT(9) /* Destination IP address (can be IPv4 or IPv6) */ #define MLXSW_REG_SLCR_LAG_HASH_DIP BIT(10) /* TCP/UDP source port */ #define MLXSW_REG_SLCR_LAG_HASH_SPORT BIT(11) /* TCP/UDP destination port*/ #define MLXSW_REG_SLCR_LAG_HASH_DPORT BIT(12) /* IPv4 Protocol/IPv6 Next Header */ #define MLXSW_REG_SLCR_LAG_HASH_IPPROTO BIT(13) /* IPv6 Flow label */ #define MLXSW_REG_SLCR_LAG_HASH_FLOWLABEL BIT(14) /* SID - FCoE source ID */ #define MLXSW_REG_SLCR_LAG_HASH_FCOE_SID BIT(15) /* DID - FCoE destination ID */ #define MLXSW_REG_SLCR_LAG_HASH_FCOE_DID BIT(16) /* OXID - FCoE originator exchange ID */ #define MLXSW_REG_SLCR_LAG_HASH_FCOE_OXID BIT(17) /* Destination QP number - for RoCE packets */ #define MLXSW_REG_SLCR_LAG_HASH_ROCE_DQP BIT(19) /* reg_slcr_lag_hash * LAG hashing configuration. This is a bitmask, in which each set * bit includes the corresponding item in the LAG hash calculation. * The default lag_hash contains SMAC, DMAC, VLANID and * Ethertype (for all packet types). * Access: RW */ MLXSW_ITEM32(reg, slcr, lag_hash, 0x04, 0, 20); static inline void mlxsw_reg_slcr_pack(char *payload, u16 lag_hash) { MLXSW_REG_ZERO(slcr, payload); mlxsw_reg_slcr_pp_set(payload, MLXSW_REG_SLCR_PP_GLOBAL); mlxsw_reg_slcr_type_set(payload, MLXSW_REG_SLCR_TYPE_CRC); mlxsw_reg_slcr_lag_hash_set(payload, lag_hash); } /* SLCOR - Switch LAG Collector Register * ------------------------------------- * The Switch LAG Collector register controls the Local Port membership * in a LAG and enablement of the collector. */ #define MLXSW_REG_SLCOR_ID 0x2016 #define MLXSW_REG_SLCOR_LEN 0x10 MLXSW_REG_DEFINE(slcor, MLXSW_REG_SLCOR_ID, MLXSW_REG_SLCOR_LEN); enum mlxsw_reg_slcor_col { /* Port is added with collector disabled */ MLXSW_REG_SLCOR_COL_LAG_ADD_PORT, MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED, MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_DISABLED, MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT, }; /* reg_slcor_col * Collector configuration * Access: RW */ MLXSW_ITEM32(reg, slcor, col, 0x00, 30, 2); /* reg_slcor_local_port * Local port number * Not supported for CPU port * Access: Index */ MLXSW_ITEM32(reg, slcor, local_port, 0x00, 16, 8); /* reg_slcor_lag_id * LAG Identifier. Index into the LAG descriptor table. * Access: Index */ MLXSW_ITEM32(reg, slcor, lag_id, 0x00, 0, 10); /* reg_slcor_port_index * Port index in the LAG list. Only valid on Add Port to LAG col. * Valid range is from 0 to cap_max_lag_members-1 * Access: RW */ MLXSW_ITEM32(reg, slcor, port_index, 0x04, 0, 10); static inline void mlxsw_reg_slcor_pack(char *payload, u8 local_port, u16 lag_id, enum mlxsw_reg_slcor_col col) { MLXSW_REG_ZERO(slcor, payload); mlxsw_reg_slcor_col_set(payload, col); mlxsw_reg_slcor_local_port_set(payload, local_port); mlxsw_reg_slcor_lag_id_set(payload, lag_id); } static inline void mlxsw_reg_slcor_port_add_pack(char *payload, u8 local_port, u16 lag_id, u8 port_index) { mlxsw_reg_slcor_pack(payload, local_port, lag_id, MLXSW_REG_SLCOR_COL_LAG_ADD_PORT); mlxsw_reg_slcor_port_index_set(payload, port_index); } static inline void mlxsw_reg_slcor_port_remove_pack(char *payload, u8 local_port, u16 lag_id) { mlxsw_reg_slcor_pack(payload, local_port, lag_id, MLXSW_REG_SLCOR_COL_LAG_REMOVE_PORT); } static inline void mlxsw_reg_slcor_col_enable_pack(char *payload, u8 local_port, u16 lag_id) { mlxsw_reg_slcor_pack(payload, local_port, lag_id, MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED); } static inline void mlxsw_reg_slcor_col_disable_pack(char *payload, u8 local_port, u16 lag_id) { mlxsw_reg_slcor_pack(payload, local_port, lag_id, MLXSW_REG_SLCOR_COL_LAG_COLLECTOR_ENABLED); } /* SPMLR - Switch Port MAC Learning Register * ----------------------------------------- * Controls the Switch MAC learning policy per port. */ #define MLXSW_REG_SPMLR_ID 0x2018 #define MLXSW_REG_SPMLR_LEN 0x8 MLXSW_REG_DEFINE(spmlr, MLXSW_REG_SPMLR_ID, MLXSW_REG_SPMLR_LEN); /* reg_spmlr_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, spmlr, local_port, 0x00, 16, 8); /* reg_spmlr_sub_port * Virtual port within the physical port. * Should be set to 0 when virtual ports are not enabled on the port. * Access: Index */ MLXSW_ITEM32(reg, spmlr, sub_port, 0x00, 8, 8); enum mlxsw_reg_spmlr_learn_mode { MLXSW_REG_SPMLR_LEARN_MODE_DISABLE = 0, MLXSW_REG_SPMLR_LEARN_MODE_ENABLE = 2, MLXSW_REG_SPMLR_LEARN_MODE_SEC = 3, }; /* reg_spmlr_learn_mode * Learning mode on the port. * 0 - Learning disabled. * 2 - Learning enabled. * 3 - Security mode. * * In security mode the switch does not learn MACs on the port, but uses the * SMAC to see if it exists on another ingress port. If so, the packet is * classified as a bad packet and is discarded unless the software registers * to receive port security error packets usign HPKT. */ MLXSW_ITEM32(reg, spmlr, learn_mode, 0x04, 30, 2); static inline void mlxsw_reg_spmlr_pack(char *payload, u8 local_port, enum mlxsw_reg_spmlr_learn_mode mode) { MLXSW_REG_ZERO(spmlr, payload); mlxsw_reg_spmlr_local_port_set(payload, local_port); mlxsw_reg_spmlr_sub_port_set(payload, 0); mlxsw_reg_spmlr_learn_mode_set(payload, mode); } /* SVFA - Switch VID to FID Allocation Register * -------------------------------------------- * Controls the VID to FID mapping and {Port, VID} to FID mapping for * virtualized ports. */ #define MLXSW_REG_SVFA_ID 0x201C #define MLXSW_REG_SVFA_LEN 0x10 MLXSW_REG_DEFINE(svfa, MLXSW_REG_SVFA_ID, MLXSW_REG_SVFA_LEN); /* reg_svfa_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32(reg, svfa, swid, 0x00, 24, 8); /* reg_svfa_local_port * Local port number. * Access: Index * * Note: Reserved for 802.1Q FIDs. */ MLXSW_ITEM32(reg, svfa, local_port, 0x00, 16, 8); enum mlxsw_reg_svfa_mt { MLXSW_REG_SVFA_MT_VID_TO_FID, MLXSW_REG_SVFA_MT_PORT_VID_TO_FID, }; /* reg_svfa_mapping_table * Mapping table: * 0 - VID to FID * 1 - {Port, VID} to FID * Access: Index * * Note: Reserved for SwitchX-2. */ MLXSW_ITEM32(reg, svfa, mapping_table, 0x00, 8, 3); /* reg_svfa_v * Valid. * Valid if set. * Access: RW * * Note: Reserved for SwitchX-2. */ MLXSW_ITEM32(reg, svfa, v, 0x00, 0, 1); /* reg_svfa_fid * Filtering ID. * Access: RW */ MLXSW_ITEM32(reg, svfa, fid, 0x04, 16, 16); /* reg_svfa_vid * VLAN ID. * Access: Index */ MLXSW_ITEM32(reg, svfa, vid, 0x04, 0, 12); /* reg_svfa_counter_set_type * Counter set type for flow counters. * Access: RW * * Note: Reserved for SwitchX-2. */ MLXSW_ITEM32(reg, svfa, counter_set_type, 0x08, 24, 8); /* reg_svfa_counter_index * Counter index for flow counters. * Access: RW * * Note: Reserved for SwitchX-2. */ MLXSW_ITEM32(reg, svfa, counter_index, 0x08, 0, 24); static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port, enum mlxsw_reg_svfa_mt mt, bool valid, u16 fid, u16 vid) { MLXSW_REG_ZERO(svfa, payload); local_port = mt == MLXSW_REG_SVFA_MT_VID_TO_FID ? 0 : local_port; mlxsw_reg_svfa_swid_set(payload, 0); mlxsw_reg_svfa_local_port_set(payload, local_port); mlxsw_reg_svfa_mapping_table_set(payload, mt); mlxsw_reg_svfa_v_set(payload, valid); mlxsw_reg_svfa_fid_set(payload, fid); mlxsw_reg_svfa_vid_set(payload, vid); } /* SVPE - Switch Virtual-Port Enabling Register * -------------------------------------------- * Enables port virtualization. */ #define MLXSW_REG_SVPE_ID 0x201E #define MLXSW_REG_SVPE_LEN 0x4 MLXSW_REG_DEFINE(svpe, MLXSW_REG_SVPE_ID, MLXSW_REG_SVPE_LEN); /* reg_svpe_local_port * Local port number * Access: Index * * Note: CPU port is not supported (uses VLAN mode only). */ MLXSW_ITEM32(reg, svpe, local_port, 0x00, 16, 8); /* reg_svpe_vp_en * Virtual port enable. * 0 - Disable, VLAN mode (VID to FID). * 1 - Enable, Virtual port mode ({Port, VID} to FID). * Access: RW */ MLXSW_ITEM32(reg, svpe, vp_en, 0x00, 8, 1); static inline void mlxsw_reg_svpe_pack(char *payload, u8 local_port, bool enable) { MLXSW_REG_ZERO(svpe, payload); mlxsw_reg_svpe_local_port_set(payload, local_port); mlxsw_reg_svpe_vp_en_set(payload, enable); } /* SFMR - Switch FID Management Register * ------------------------------------- * Creates and configures FIDs. */ #define MLXSW_REG_SFMR_ID 0x201F #define MLXSW_REG_SFMR_LEN 0x18 MLXSW_REG_DEFINE(sfmr, MLXSW_REG_SFMR_ID, MLXSW_REG_SFMR_LEN); enum mlxsw_reg_sfmr_op { MLXSW_REG_SFMR_OP_CREATE_FID, MLXSW_REG_SFMR_OP_DESTROY_FID, }; /* reg_sfmr_op * Operation. * 0 - Create or edit FID. * 1 - Destroy FID. * Access: WO */ MLXSW_ITEM32(reg, sfmr, op, 0x00, 24, 4); /* reg_sfmr_fid * Filtering ID. * Access: Index */ MLXSW_ITEM32(reg, sfmr, fid, 0x00, 0, 16); /* reg_sfmr_fid_offset * FID offset. * Used to point into the flooding table selected by SFGC register if * the table is of type FID-Offset. Otherwise, this field is reserved. * Access: RW */ MLXSW_ITEM32(reg, sfmr, fid_offset, 0x08, 0, 16); /* reg_sfmr_vtfp * Valid Tunnel Flood Pointer. * If not set, then nve_tunnel_flood_ptr is reserved and considered NULL. * Access: RW * * Note: Reserved for 802.1Q FIDs. */ MLXSW_ITEM32(reg, sfmr, vtfp, 0x0C, 31, 1); /* reg_sfmr_nve_tunnel_flood_ptr * Underlay Flooding and BC Pointer. * Used as a pointer to the first entry of the group based link lists of * flooding or BC entries (for NVE tunnels). * Access: RW */ MLXSW_ITEM32(reg, sfmr, nve_tunnel_flood_ptr, 0x0C, 0, 24); /* reg_sfmr_vv * VNI Valid. * If not set, then vni is reserved. * Access: RW * * Note: Reserved for 802.1Q FIDs. */ MLXSW_ITEM32(reg, sfmr, vv, 0x10, 31, 1); /* reg_sfmr_vni * Virtual Network Identifier. * Access: RW * * Note: A given VNI can only be assigned to one FID. */ MLXSW_ITEM32(reg, sfmr, vni, 0x10, 0, 24); static inline void mlxsw_reg_sfmr_pack(char *payload, enum mlxsw_reg_sfmr_op op, u16 fid, u16 fid_offset) { MLXSW_REG_ZERO(sfmr, payload); mlxsw_reg_sfmr_op_set(payload, op); mlxsw_reg_sfmr_fid_set(payload, fid); mlxsw_reg_sfmr_fid_offset_set(payload, fid_offset); mlxsw_reg_sfmr_vtfp_set(payload, false); mlxsw_reg_sfmr_vv_set(payload, false); } /* SPVMLR - Switch Port VLAN MAC Learning Register * ----------------------------------------------- * Controls the switch MAC learning policy per {Port, VID}. */ #define MLXSW_REG_SPVMLR_ID 0x2020 #define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */ #define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */ #define MLXSW_REG_SPVMLR_REC_MAX_COUNT 255 #define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \ MLXSW_REG_SPVMLR_REC_LEN * \ MLXSW_REG_SPVMLR_REC_MAX_COUNT) MLXSW_REG_DEFINE(spvmlr, MLXSW_REG_SPVMLR_ID, MLXSW_REG_SPVMLR_LEN); /* reg_spvmlr_local_port * Local ingress port. * Access: Index * * Note: CPU port is not supported. */ MLXSW_ITEM32(reg, spvmlr, local_port, 0x00, 16, 8); /* reg_spvmlr_num_rec * Number of records to update. * Access: OP */ MLXSW_ITEM32(reg, spvmlr, num_rec, 0x00, 0, 8); /* reg_spvmlr_rec_learn_enable * 0 - Disable learning for {Port, VID}. * 1 - Enable learning for {Port, VID}. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_learn_enable, MLXSW_REG_SPVMLR_BASE_LEN, 31, 1, MLXSW_REG_SPVMLR_REC_LEN, 0x00, false); /* reg_spvmlr_rec_vid * VLAN ID to be added/removed from port or for querying. * Access: Index */ MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_vid, MLXSW_REG_SPVMLR_BASE_LEN, 0, 12, MLXSW_REG_SPVMLR_REC_LEN, 0x00, false); static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port, u16 vid_begin, u16 vid_end, bool learn_enable) { int num_rec = vid_end - vid_begin + 1; int i; WARN_ON(num_rec < 1 || num_rec > MLXSW_REG_SPVMLR_REC_MAX_COUNT); MLXSW_REG_ZERO(spvmlr, payload); mlxsw_reg_spvmlr_local_port_set(payload, local_port); mlxsw_reg_spvmlr_num_rec_set(payload, num_rec); for (i = 0; i < num_rec; i++) { mlxsw_reg_spvmlr_rec_learn_enable_set(payload, i, learn_enable); mlxsw_reg_spvmlr_rec_vid_set(payload, i, vid_begin + i); } } /* PPBT - Policy-Engine Port Binding Table * --------------------------------------- * This register is used for configuration of the Port Binding Table. */ #define MLXSW_REG_PPBT_ID 0x3002 #define MLXSW_REG_PPBT_LEN 0x14 MLXSW_REG_DEFINE(ppbt, MLXSW_REG_PPBT_ID, MLXSW_REG_PPBT_LEN); enum mlxsw_reg_pxbt_e { MLXSW_REG_PXBT_E_IACL, MLXSW_REG_PXBT_E_EACL, }; /* reg_ppbt_e * Access: Index */ MLXSW_ITEM32(reg, ppbt, e, 0x00, 31, 1); enum mlxsw_reg_pxbt_op { MLXSW_REG_PXBT_OP_BIND, MLXSW_REG_PXBT_OP_UNBIND, }; /* reg_ppbt_op * Access: RW */ MLXSW_ITEM32(reg, ppbt, op, 0x00, 28, 3); /* reg_ppbt_local_port * Local port. Not including CPU port. * Access: Index */ MLXSW_ITEM32(reg, ppbt, local_port, 0x00, 16, 8); /* reg_ppbt_g * group - When set, the binding is of an ACL group. When cleared, * the binding is of an ACL. * Must be set to 1 for Spectrum. * Access: RW */ MLXSW_ITEM32(reg, ppbt, g, 0x10, 31, 1); /* reg_ppbt_acl_info * ACL/ACL group identifier. If the g bit is set, this field should hold * the acl_group_id, else it should hold the acl_id. * Access: RW */ MLXSW_ITEM32(reg, ppbt, acl_info, 0x10, 0, 16); static inline void mlxsw_reg_ppbt_pack(char *payload, enum mlxsw_reg_pxbt_e e, enum mlxsw_reg_pxbt_op op, u8 local_port, u16 acl_info) { MLXSW_REG_ZERO(ppbt, payload); mlxsw_reg_ppbt_e_set(payload, e); mlxsw_reg_ppbt_op_set(payload, op); mlxsw_reg_ppbt_local_port_set(payload, local_port); mlxsw_reg_ppbt_g_set(payload, true); mlxsw_reg_ppbt_acl_info_set(payload, acl_info); } /* PACL - Policy-Engine ACL Register * --------------------------------- * This register is used for configuration of the ACL. */ #define MLXSW_REG_PACL_ID 0x3004 #define MLXSW_REG_PACL_LEN 0x70 MLXSW_REG_DEFINE(pacl, MLXSW_REG_PACL_ID, MLXSW_REG_PACL_LEN); /* reg_pacl_v * Valid. Setting the v bit makes the ACL valid. It should not be cleared * while the ACL is bounded to either a port, VLAN or ACL rule. * Access: RW */ MLXSW_ITEM32(reg, pacl, v, 0x00, 24, 1); /* reg_pacl_acl_id * An identifier representing the ACL (managed by software) * Range 0 .. cap_max_acl_regions - 1 * Access: Index */ MLXSW_ITEM32(reg, pacl, acl_id, 0x08, 0, 16); #define MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN 16 /* reg_pacl_tcam_region_info * Opaque object that represents a TCAM region. * Obtained through PTAR register. * Access: RW */ MLXSW_ITEM_BUF(reg, pacl, tcam_region_info, 0x30, MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); static inline void mlxsw_reg_pacl_pack(char *payload, u16 acl_id, bool valid, const char *tcam_region_info) { MLXSW_REG_ZERO(pacl, payload); mlxsw_reg_pacl_acl_id_set(payload, acl_id); mlxsw_reg_pacl_v_set(payload, valid); mlxsw_reg_pacl_tcam_region_info_memcpy_to(payload, tcam_region_info); } /* PAGT - Policy-Engine ACL Group Table * ------------------------------------ * This register is used for configuration of the ACL Group Table. */ #define MLXSW_REG_PAGT_ID 0x3005 #define MLXSW_REG_PAGT_BASE_LEN 0x30 #define MLXSW_REG_PAGT_ACL_LEN 4 #define MLXSW_REG_PAGT_ACL_MAX_NUM 16 #define MLXSW_REG_PAGT_LEN (MLXSW_REG_PAGT_BASE_LEN + \ MLXSW_REG_PAGT_ACL_MAX_NUM * MLXSW_REG_PAGT_ACL_LEN) MLXSW_REG_DEFINE(pagt, MLXSW_REG_PAGT_ID, MLXSW_REG_PAGT_LEN); /* reg_pagt_size * Number of ACLs in the group. * Size 0 invalidates a group. * Range 0 .. cap_max_acl_group_size (hard coded to 16 for now) * Total number of ACLs in all groups must be lower or equal * to cap_max_acl_tot_groups * Note: a group which is binded must not be invalidated * Access: Index */ MLXSW_ITEM32(reg, pagt, size, 0x00, 0, 8); /* reg_pagt_acl_group_id * An identifier (numbered from 0..cap_max_acl_groups-1) representing * the ACL Group identifier (managed by software). * Access: Index */ MLXSW_ITEM32(reg, pagt, acl_group_id, 0x08, 0, 16); /* reg_pagt_acl_id * ACL identifier * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pagt, acl_id, 0x30, 0, 16, 0x04, 0x00, false); static inline void mlxsw_reg_pagt_pack(char *payload, u16 acl_group_id) { MLXSW_REG_ZERO(pagt, payload); mlxsw_reg_pagt_acl_group_id_set(payload, acl_group_id); } static inline void mlxsw_reg_pagt_acl_id_pack(char *payload, int index, u16 acl_id) { u8 size = mlxsw_reg_pagt_size_get(payload); if (index >= size) mlxsw_reg_pagt_size_set(payload, index + 1); mlxsw_reg_pagt_acl_id_set(payload, index, acl_id); } /* PTAR - Policy-Engine TCAM Allocation Register * --------------------------------------------- * This register is used for allocation of regions in the TCAM. * Note: Query method is not supported on this register. */ #define MLXSW_REG_PTAR_ID 0x3006 #define MLXSW_REG_PTAR_BASE_LEN 0x20 #define MLXSW_REG_PTAR_KEY_ID_LEN 1 #define MLXSW_REG_PTAR_KEY_ID_MAX_NUM 16 #define MLXSW_REG_PTAR_LEN (MLXSW_REG_PTAR_BASE_LEN + \ MLXSW_REG_PTAR_KEY_ID_MAX_NUM * MLXSW_REG_PTAR_KEY_ID_LEN) MLXSW_REG_DEFINE(ptar, MLXSW_REG_PTAR_ID, MLXSW_REG_PTAR_LEN); enum mlxsw_reg_ptar_op { /* allocate a TCAM region */ MLXSW_REG_PTAR_OP_ALLOC, /* resize a TCAM region */ MLXSW_REG_PTAR_OP_RESIZE, /* deallocate TCAM region */ MLXSW_REG_PTAR_OP_FREE, /* test allocation */ MLXSW_REG_PTAR_OP_TEST, }; /* reg_ptar_op * Access: OP */ MLXSW_ITEM32(reg, ptar, op, 0x00, 28, 4); /* reg_ptar_action_set_type * Type of action set to be used on this region. * For Spectrum, this is always type 2 - "flexible" * Access: WO */ MLXSW_ITEM32(reg, ptar, action_set_type, 0x00, 16, 8); /* reg_ptar_key_type * TCAM key type for the region. * For Spectrum, this is always type 0x50 - "FLEX_KEY" * Access: WO */ MLXSW_ITEM32(reg, ptar, key_type, 0x00, 0, 8); /* reg_ptar_region_size * TCAM region size. When allocating/resizing this is the requested size, * the response is the actual size. Note that actual size may be * larger than requested. * Allowed range 1 .. cap_max_rules-1 * Reserved during op deallocate. * Access: WO */ MLXSW_ITEM32(reg, ptar, region_size, 0x04, 0, 16); /* reg_ptar_region_id * Region identifier * Range 0 .. cap_max_regions-1 * Access: Index */ MLXSW_ITEM32(reg, ptar, region_id, 0x08, 0, 16); /* reg_ptar_tcam_region_info * Opaque object that represents the TCAM region. * Returned when allocating a region. * Provided by software for ACL generation and region deallocation and resize. * Access: RW */ MLXSW_ITEM_BUF(reg, ptar, tcam_region_info, 0x10, MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); /* reg_ptar_flexible_key_id * Identifier of the Flexible Key. * Only valid if key_type == "FLEX_KEY" * The key size will be rounded up to one of the following values: * 9B, 18B, 36B, 54B. * This field is reserved for in resize operation. * Access: WO */ MLXSW_ITEM8_INDEXED(reg, ptar, flexible_key_id, 0x20, 0, 8, MLXSW_REG_PTAR_KEY_ID_LEN, 0x00, false); static inline void mlxsw_reg_ptar_pack(char *payload, enum mlxsw_reg_ptar_op op, u16 region_size, u16 region_id, const char *tcam_region_info) { MLXSW_REG_ZERO(ptar, payload); mlxsw_reg_ptar_op_set(payload, op); mlxsw_reg_ptar_action_set_type_set(payload, 2); /* "flexible" */ mlxsw_reg_ptar_key_type_set(payload, 0x50); /* "FLEX_KEY" */ mlxsw_reg_ptar_region_size_set(payload, region_size); mlxsw_reg_ptar_region_id_set(payload, region_id); mlxsw_reg_ptar_tcam_region_info_memcpy_to(payload, tcam_region_info); } static inline void mlxsw_reg_ptar_key_id_pack(char *payload, int index, u16 key_id) { mlxsw_reg_ptar_flexible_key_id_set(payload, index, key_id); } static inline void mlxsw_reg_ptar_unpack(char *payload, char *tcam_region_info) { mlxsw_reg_ptar_tcam_region_info_memcpy_from(payload, tcam_region_info); } /* PPBS - Policy-Engine Policy Based Switching Register * ---------------------------------------------------- * This register retrieves and sets Policy Based Switching Table entries. */ #define MLXSW_REG_PPBS_ID 0x300C #define MLXSW_REG_PPBS_LEN 0x14 MLXSW_REG_DEFINE(ppbs, MLXSW_REG_PPBS_ID, MLXSW_REG_PPBS_LEN); /* reg_ppbs_pbs_ptr * Index into the PBS table. * For Spectrum, the index points to the KVD Linear. * Access: Index */ MLXSW_ITEM32(reg, ppbs, pbs_ptr, 0x08, 0, 24); /* reg_ppbs_system_port * Unique port identifier for the final destination of the packet. * Access: RW */ MLXSW_ITEM32(reg, ppbs, system_port, 0x10, 0, 16); static inline void mlxsw_reg_ppbs_pack(char *payload, u32 pbs_ptr, u16 system_port) { MLXSW_REG_ZERO(ppbs, payload); mlxsw_reg_ppbs_pbs_ptr_set(payload, pbs_ptr); mlxsw_reg_ppbs_system_port_set(payload, system_port); } /* PRCR - Policy-Engine Rules Copy Register * ---------------------------------------- * This register is used for accessing rules within a TCAM region. */ #define MLXSW_REG_PRCR_ID 0x300D #define MLXSW_REG_PRCR_LEN 0x40 MLXSW_REG_DEFINE(prcr, MLXSW_REG_PRCR_ID, MLXSW_REG_PRCR_LEN); enum mlxsw_reg_prcr_op { /* Move rules. Moves the rules from "tcam_region_info" starting * at offset "offset" to "dest_tcam_region_info" * at offset "dest_offset." */ MLXSW_REG_PRCR_OP_MOVE, /* Copy rules. Copies the rules from "tcam_region_info" starting * at offset "offset" to "dest_tcam_region_info" * at offset "dest_offset." */ MLXSW_REG_PRCR_OP_COPY, }; /* reg_prcr_op * Access: OP */ MLXSW_ITEM32(reg, prcr, op, 0x00, 28, 4); /* reg_prcr_offset * Offset within the source region to copy/move from. * Access: Index */ MLXSW_ITEM32(reg, prcr, offset, 0x00, 0, 16); /* reg_prcr_size * The number of rules to copy/move. * Access: WO */ MLXSW_ITEM32(reg, prcr, size, 0x04, 0, 16); /* reg_prcr_tcam_region_info * Opaque object that represents the source TCAM region. * Access: Index */ MLXSW_ITEM_BUF(reg, prcr, tcam_region_info, 0x10, MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); /* reg_prcr_dest_offset * Offset within the source region to copy/move to. * Access: Index */ MLXSW_ITEM32(reg, prcr, dest_offset, 0x20, 0, 16); /* reg_prcr_dest_tcam_region_info * Opaque object that represents the destination TCAM region. * Access: Index */ MLXSW_ITEM_BUF(reg, prcr, dest_tcam_region_info, 0x30, MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); static inline void mlxsw_reg_prcr_pack(char *payload, enum mlxsw_reg_prcr_op op, const char *src_tcam_region_info, u16 src_offset, const char *dest_tcam_region_info, u16 dest_offset, u16 size) { MLXSW_REG_ZERO(prcr, payload); mlxsw_reg_prcr_op_set(payload, op); mlxsw_reg_prcr_offset_set(payload, src_offset); mlxsw_reg_prcr_size_set(payload, size); mlxsw_reg_prcr_tcam_region_info_memcpy_to(payload, src_tcam_region_info); mlxsw_reg_prcr_dest_offset_set(payload, dest_offset); mlxsw_reg_prcr_dest_tcam_region_info_memcpy_to(payload, dest_tcam_region_info); } /* PEFA - Policy-Engine Extended Flexible Action Register * ------------------------------------------------------ * This register is used for accessing an extended flexible action entry * in the central KVD Linear Database. */ #define MLXSW_REG_PEFA_ID 0x300F #define MLXSW_REG_PEFA_LEN 0xB0 MLXSW_REG_DEFINE(pefa, MLXSW_REG_PEFA_ID, MLXSW_REG_PEFA_LEN); /* reg_pefa_index * Index in the KVD Linear Centralized Database. * Access: Index */ MLXSW_ITEM32(reg, pefa, index, 0x00, 0, 24); #define MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN 0xA8 /* reg_pefa_flex_action_set * Action-set to perform when rule is matched. * Must be zero padded if action set is shorter. * Access: RW */ MLXSW_ITEM_BUF(reg, pefa, flex_action_set, 0x08, MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN); static inline void mlxsw_reg_pefa_pack(char *payload, u32 index, const char *flex_action_set) { MLXSW_REG_ZERO(pefa, payload); mlxsw_reg_pefa_index_set(payload, index); mlxsw_reg_pefa_flex_action_set_memcpy_to(payload, flex_action_set); } /* PTCE-V2 - Policy-Engine TCAM Entry Register Version 2 * ----------------------------------------------------- * This register is used for accessing rules within a TCAM region. * It is a new version of PTCE in order to support wider key, * mask and action within a TCAM region. This register is not supported * by SwitchX and SwitchX-2. */ #define MLXSW_REG_PTCE2_ID 0x3017 #define MLXSW_REG_PTCE2_LEN 0x1D8 MLXSW_REG_DEFINE(ptce2, MLXSW_REG_PTCE2_ID, MLXSW_REG_PTCE2_LEN); /* reg_ptce2_v * Valid. * Access: RW */ MLXSW_ITEM32(reg, ptce2, v, 0x00, 31, 1); /* reg_ptce2_a * Activity. Set if a packet lookup has hit on the specific entry. * To clear the "a" bit, use "clear activity" op or "clear on read" op. * Access: RO */ MLXSW_ITEM32(reg, ptce2, a, 0x00, 30, 1); enum mlxsw_reg_ptce2_op { /* Read operation. */ MLXSW_REG_PTCE2_OP_QUERY_READ = 0, /* clear on read operation. Used to read entry * and clear Activity bit. */ MLXSW_REG_PTCE2_OP_QUERY_CLEAR_ON_READ = 1, /* Write operation. Used to write a new entry to the table. * All R/W fields are relevant for new entry. Activity bit is set * for new entries - Note write with v = 0 will delete the entry. */ MLXSW_REG_PTCE2_OP_WRITE_WRITE = 0, /* Update action. Only action set will be updated. */ MLXSW_REG_PTCE2_OP_WRITE_UPDATE = 1, /* Clear activity. A bit is cleared for the entry. */ MLXSW_REG_PTCE2_OP_WRITE_CLEAR_ACTIVITY = 2, }; /* reg_ptce2_op * Access: OP */ MLXSW_ITEM32(reg, ptce2, op, 0x00, 20, 3); /* reg_ptce2_offset * Access: Index */ MLXSW_ITEM32(reg, ptce2, offset, 0x00, 0, 16); /* reg_ptce2_tcam_region_info * Opaque object that represents the TCAM region. * Access: Index */ MLXSW_ITEM_BUF(reg, ptce2, tcam_region_info, 0x10, MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN); #define MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN 96 /* reg_ptce2_flex_key_blocks * ACL Key. * Access: RW */ MLXSW_ITEM_BUF(reg, ptce2, flex_key_blocks, 0x20, MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN); /* reg_ptce2_mask * mask- in the same size as key. A bit that is set directs the TCAM * to compare the corresponding bit in key. A bit that is clear directs * the TCAM to ignore the corresponding bit in key. * Access: RW */ MLXSW_ITEM_BUF(reg, ptce2, mask, 0x80, MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN); /* reg_ptce2_flex_action_set * ACL action set. * Access: RW */ MLXSW_ITEM_BUF(reg, ptce2, flex_action_set, 0xE0, MLXSW_REG_PXXX_FLEX_ACTION_SET_LEN); static inline void mlxsw_reg_ptce2_pack(char *payload, bool valid, enum mlxsw_reg_ptce2_op op, const char *tcam_region_info, u16 offset) { MLXSW_REG_ZERO(ptce2, payload); mlxsw_reg_ptce2_v_set(payload, valid); mlxsw_reg_ptce2_op_set(payload, op); mlxsw_reg_ptce2_offset_set(payload, offset); mlxsw_reg_ptce2_tcam_region_info_memcpy_to(payload, tcam_region_info); } /* QPCR - QoS Policer Configuration Register * ----------------------------------------- * The QPCR register is used to create policers - that limit * the rate of bytes or packets via some trap group. */ #define MLXSW_REG_QPCR_ID 0x4004 #define MLXSW_REG_QPCR_LEN 0x28 MLXSW_REG_DEFINE(qpcr, MLXSW_REG_QPCR_ID, MLXSW_REG_QPCR_LEN); enum mlxsw_reg_qpcr_g { MLXSW_REG_QPCR_G_GLOBAL = 2, MLXSW_REG_QPCR_G_STORM_CONTROL = 3, }; /* reg_qpcr_g * The policer type. * Access: Index */ MLXSW_ITEM32(reg, qpcr, g, 0x00, 14, 2); /* reg_qpcr_pid * Policer ID. * Access: Index */ MLXSW_ITEM32(reg, qpcr, pid, 0x00, 0, 14); /* reg_qpcr_color_aware * Is the policer aware of colors. * Must be 0 (unaware) for cpu port. * Access: RW for unbounded policer. RO for bounded policer. */ MLXSW_ITEM32(reg, qpcr, color_aware, 0x04, 15, 1); /* reg_qpcr_bytes * Is policer limit is for bytes per sec or packets per sec. * 0 - packets * 1 - bytes * Access: RW for unbounded policer. RO for bounded policer. */ MLXSW_ITEM32(reg, qpcr, bytes, 0x04, 14, 1); enum mlxsw_reg_qpcr_ir_units { MLXSW_REG_QPCR_IR_UNITS_M, MLXSW_REG_QPCR_IR_UNITS_K, }; /* reg_qpcr_ir_units * Policer's units for cir and eir fields (for bytes limits only) * 1 - 10^3 * 0 - 10^6 * Access: OP */ MLXSW_ITEM32(reg, qpcr, ir_units, 0x04, 12, 1); enum mlxsw_reg_qpcr_rate_type { MLXSW_REG_QPCR_RATE_TYPE_SINGLE = 1, MLXSW_REG_QPCR_RATE_TYPE_DOUBLE = 2, }; /* reg_qpcr_rate_type * Policer can have one limit (single rate) or 2 limits with specific operation * for packets that exceed the lower rate but not the upper one. * (For cpu port must be single rate) * Access: RW for unbounded policer. RO for bounded policer. */ MLXSW_ITEM32(reg, qpcr, rate_type, 0x04, 8, 2); /* reg_qpc_cbs * Policer's committed burst size. * The policer is working with time slices of 50 nano sec. By default every * slice is granted the proportionate share of the committed rate. If we want to * allow a slice to exceed that share (while still keeping the rate per sec) we * can allow burst. The burst size is between the default proportionate share * (and no lower than 8) to 32Gb. (Even though giving a number higher than the * committed rate will result in exceeding the rate). The burst size must be a * log of 2 and will be determined by 2^cbs. * Access: RW */ MLXSW_ITEM32(reg, qpcr, cbs, 0x08, 24, 6); /* reg_qpcr_cir * Policer's committed rate. * The rate used for sungle rate, the lower rate for double rate. * For bytes limits, the rate will be this value * the unit from ir_units. * (Resolution error is up to 1%). * Access: RW */ MLXSW_ITEM32(reg, qpcr, cir, 0x0C, 0, 32); /* reg_qpcr_eir * Policer's exceed rate. * The higher rate for double rate, reserved for single rate. * Lower rate for double rate policer. * For bytes limits, the rate will be this value * the unit from ir_units. * (Resolution error is up to 1%). * Access: RW */ MLXSW_ITEM32(reg, qpcr, eir, 0x10, 0, 32); #define MLXSW_REG_QPCR_DOUBLE_RATE_ACTION 2 /* reg_qpcr_exceed_action. * What to do with packets between the 2 limits for double rate. * Access: RW for unbounded policer. RO for bounded policer. */ MLXSW_ITEM32(reg, qpcr, exceed_action, 0x14, 0, 4); enum mlxsw_reg_qpcr_action { /* Discard */ MLXSW_REG_QPCR_ACTION_DISCARD = 1, /* Forward and set color to red. * If the packet is intended to cpu port, it will be dropped. */ MLXSW_REG_QPCR_ACTION_FORWARD = 2, }; /* reg_qpcr_violate_action * What to do with packets that cross the cir limit (for single rate) or the eir * limit (for double rate). * Access: RW for unbounded policer. RO for bounded policer. */ MLXSW_ITEM32(reg, qpcr, violate_action, 0x18, 0, 4); static inline void mlxsw_reg_qpcr_pack(char *payload, u16 pid, enum mlxsw_reg_qpcr_ir_units ir_units, bool bytes, u32 cir, u16 cbs) { MLXSW_REG_ZERO(qpcr, payload); mlxsw_reg_qpcr_pid_set(payload, pid); mlxsw_reg_qpcr_g_set(payload, MLXSW_REG_QPCR_G_GLOBAL); mlxsw_reg_qpcr_rate_type_set(payload, MLXSW_REG_QPCR_RATE_TYPE_SINGLE); mlxsw_reg_qpcr_violate_action_set(payload, MLXSW_REG_QPCR_ACTION_DISCARD); mlxsw_reg_qpcr_cir_set(payload, cir); mlxsw_reg_qpcr_ir_units_set(payload, ir_units); mlxsw_reg_qpcr_bytes_set(payload, bytes); mlxsw_reg_qpcr_cbs_set(payload, cbs); } /* QTCT - QoS Switch Traffic Class Table * ------------------------------------- * Configures the mapping between the packet switch priority and the * traffic class on the transmit port. */ #define MLXSW_REG_QTCT_ID 0x400A #define MLXSW_REG_QTCT_LEN 0x08 MLXSW_REG_DEFINE(qtct, MLXSW_REG_QTCT_ID, MLXSW_REG_QTCT_LEN); /* reg_qtct_local_port * Local port number. * Access: Index * * Note: CPU port is not supported. */ MLXSW_ITEM32(reg, qtct, local_port, 0x00, 16, 8); /* reg_qtct_sub_port * Virtual port within the physical port. * Should be set to 0 when virtual ports are not enabled on the port. * Access: Index */ MLXSW_ITEM32(reg, qtct, sub_port, 0x00, 8, 8); /* reg_qtct_switch_prio * Switch priority. * Access: Index */ MLXSW_ITEM32(reg, qtct, switch_prio, 0x00, 0, 4); /* reg_qtct_tclass * Traffic class. * Default values: * switch_prio 0 : tclass 1 * switch_prio 1 : tclass 0 * switch_prio i : tclass i, for i > 1 * Access: RW */ MLXSW_ITEM32(reg, qtct, tclass, 0x04, 0, 4); static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port, u8 switch_prio, u8 tclass) { MLXSW_REG_ZERO(qtct, payload); mlxsw_reg_qtct_local_port_set(payload, local_port); mlxsw_reg_qtct_switch_prio_set(payload, switch_prio); mlxsw_reg_qtct_tclass_set(payload, tclass); } /* QEEC - QoS ETS Element Configuration Register * --------------------------------------------- * Configures the ETS elements. */ #define MLXSW_REG_QEEC_ID 0x400D #define MLXSW_REG_QEEC_LEN 0x1C MLXSW_REG_DEFINE(qeec, MLXSW_REG_QEEC_ID, MLXSW_REG_QEEC_LEN); /* reg_qeec_local_port * Local port number. * Access: Index * * Note: CPU port is supported. */ MLXSW_ITEM32(reg, qeec, local_port, 0x00, 16, 8); enum mlxsw_reg_qeec_hr { MLXSW_REG_QEEC_HIERARCY_PORT, MLXSW_REG_QEEC_HIERARCY_GROUP, MLXSW_REG_QEEC_HIERARCY_SUBGROUP, MLXSW_REG_QEEC_HIERARCY_TC, }; /* reg_qeec_element_hierarchy * 0 - Port * 1 - Group * 2 - Subgroup * 3 - Traffic Class * Access: Index */ MLXSW_ITEM32(reg, qeec, element_hierarchy, 0x04, 16, 4); /* reg_qeec_element_index * The index of the element in the hierarchy. * Access: Index */ MLXSW_ITEM32(reg, qeec, element_index, 0x04, 0, 8); /* reg_qeec_next_element_index * The index of the next (lower) element in the hierarchy. * Access: RW * * Note: Reserved for element_hierarchy 0. */ MLXSW_ITEM32(reg, qeec, next_element_index, 0x08, 0, 8); enum { MLXSW_REG_QEEC_BYTES_MODE, MLXSW_REG_QEEC_PACKETS_MODE, }; /* reg_qeec_pb * Packets or bytes mode. * 0 - Bytes mode * 1 - Packets mode * Access: RW * * Note: Used for max shaper configuration. For Spectrum, packets mode * is supported only for traffic classes of CPU port. */ MLXSW_ITEM32(reg, qeec, pb, 0x0C, 28, 1); /* reg_qeec_mase * Max shaper configuration enable. Enables configuration of the max * shaper on this ETS element. * 0 - Disable * 1 - Enable * Access: RW */ MLXSW_ITEM32(reg, qeec, mase, 0x10, 31, 1); /* A large max rate will disable the max shaper. */ #define MLXSW_REG_QEEC_MAS_DIS 200000000 /* Kbps */ /* reg_qeec_max_shaper_rate * Max shaper information rate. * For CPU port, can only be configured for port hierarchy. * When in bytes mode, value is specified in units of 1000bps. * Access: RW */ MLXSW_ITEM32(reg, qeec, max_shaper_rate, 0x10, 0, 28); /* reg_qeec_de * DWRR configuration enable. Enables configuration of the dwrr and * dwrr_weight. * 0 - Disable * 1 - Enable * Access: RW */ MLXSW_ITEM32(reg, qeec, de, 0x18, 31, 1); /* reg_qeec_dwrr * Transmission selection algorithm to use on the link going down from * the ETS element. * 0 - Strict priority * 1 - DWRR * Access: RW */ MLXSW_ITEM32(reg, qeec, dwrr, 0x18, 15, 1); /* reg_qeec_dwrr_weight * DWRR weight on the link going down from the ETS element. The * percentage of bandwidth guaranteed to an ETS element within * its hierarchy. The sum of all weights across all ETS elements * within one hierarchy should be equal to 100. Reserved when * transmission selection algorithm is strict priority. * Access: RW */ MLXSW_ITEM32(reg, qeec, dwrr_weight, 0x18, 0, 8); static inline void mlxsw_reg_qeec_pack(char *payload, u8 local_port, enum mlxsw_reg_qeec_hr hr, u8 index, u8 next_index) { MLXSW_REG_ZERO(qeec, payload); mlxsw_reg_qeec_local_port_set(payload, local_port); mlxsw_reg_qeec_element_hierarchy_set(payload, hr); mlxsw_reg_qeec_element_index_set(payload, index); mlxsw_reg_qeec_next_element_index_set(payload, next_index); } /* PMLP - Ports Module to Local Port Register * ------------------------------------------ * Configures the assignment of modules to local ports. */ #define MLXSW_REG_PMLP_ID 0x5002 #define MLXSW_REG_PMLP_LEN 0x40 MLXSW_REG_DEFINE(pmlp, MLXSW_REG_PMLP_ID, MLXSW_REG_PMLP_LEN); /* reg_pmlp_rxtx * 0 - Tx value is used for both Tx and Rx. * 1 - Rx value is taken from a separte field. * Access: RW */ MLXSW_ITEM32(reg, pmlp, rxtx, 0x00, 31, 1); /* reg_pmlp_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pmlp, local_port, 0x00, 16, 8); /* reg_pmlp_width * 0 - Unmap local port. * 1 - Lane 0 is used. * 2 - Lanes 0 and 1 are used. * 4 - Lanes 0, 1, 2 and 3 are used. * Access: RW */ MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8); /* reg_pmlp_module * Module number. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0x00, false); /* reg_pmlp_tx_lane * Tx Lane. When rxtx field is cleared, this field is used for Rx as well. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 0x00, false); /* reg_pmlp_rx_lane * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is * equal to Tx lane. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 0x00, false); static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port) { MLXSW_REG_ZERO(pmlp, payload); mlxsw_reg_pmlp_local_port_set(payload, local_port); } /* PMTU - Port MTU Register * ------------------------ * Configures and reports the port MTU. */ #define MLXSW_REG_PMTU_ID 0x5003 #define MLXSW_REG_PMTU_LEN 0x10 MLXSW_REG_DEFINE(pmtu, MLXSW_REG_PMTU_ID, MLXSW_REG_PMTU_LEN); /* reg_pmtu_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pmtu, local_port, 0x00, 16, 8); /* reg_pmtu_max_mtu * Maximum MTU. * When port type (e.g. Ethernet) is configured, the relevant MTU is * reported, otherwise the minimum between the max_mtu of the different * types is reported. * Access: RO */ MLXSW_ITEM32(reg, pmtu, max_mtu, 0x04, 16, 16); /* reg_pmtu_admin_mtu * MTU value to set port to. Must be smaller or equal to max_mtu. * Note: If port type is Infiniband, then port must be disabled, when its * MTU is set. * Access: RW */ MLXSW_ITEM32(reg, pmtu, admin_mtu, 0x08, 16, 16); /* reg_pmtu_oper_mtu * The actual MTU configured on the port. Packets exceeding this size * will be dropped. * Note: In Ethernet and FC oper_mtu == admin_mtu, however, in Infiniband * oper_mtu might be smaller than admin_mtu. * Access: RO */ MLXSW_ITEM32(reg, pmtu, oper_mtu, 0x0C, 16, 16); static inline void mlxsw_reg_pmtu_pack(char *payload, u8 local_port, u16 new_mtu) { MLXSW_REG_ZERO(pmtu, payload); mlxsw_reg_pmtu_local_port_set(payload, local_port); mlxsw_reg_pmtu_max_mtu_set(payload, 0); mlxsw_reg_pmtu_admin_mtu_set(payload, new_mtu); mlxsw_reg_pmtu_oper_mtu_set(payload, 0); } /* PTYS - Port Type and Speed Register * ----------------------------------- * Configures and reports the port speed type. * * Note: When set while the link is up, the changes will not take effect * until the port transitions from down to up state. */ #define MLXSW_REG_PTYS_ID 0x5004 #define MLXSW_REG_PTYS_LEN 0x40 MLXSW_REG_DEFINE(ptys, MLXSW_REG_PTYS_ID, MLXSW_REG_PTYS_LEN); /* reg_ptys_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8); #define MLXSW_REG_PTYS_PROTO_MASK_IB BIT(0) #define MLXSW_REG_PTYS_PROTO_MASK_ETH BIT(2) /* reg_ptys_proto_mask * Protocol mask. Indicates which protocol is used. * 0 - Infiniband. * 1 - Fibre Channel. * 2 - Ethernet. * Access: Index */ MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3); enum { MLXSW_REG_PTYS_AN_STATUS_NA, MLXSW_REG_PTYS_AN_STATUS_OK, MLXSW_REG_PTYS_AN_STATUS_FAIL, }; /* reg_ptys_an_status * Autonegotiation status. * Access: RO */ MLXSW_ITEM32(reg, ptys, an_status, 0x04, 28, 4); #define MLXSW_REG_PTYS_ETH_SPEED_SGMII BIT(0) #define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX BIT(1) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 BIT(2) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4 BIT(3) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR BIT(4) #define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5) #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6) #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7) #define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4 BIT(8) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR BIT(13) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR BIT(14) #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4 BIT(15) #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4 BIT(16) #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_SR2 BIT(18) #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4 BIT(19) #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 BIT(20) #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21) #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22) #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23) #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX BIT(24) #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T BIT(25) #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T BIT(26) #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27) #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28) #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29) #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_CR2 BIT(30) #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2 BIT(31) /* reg_ptys_eth_proto_cap * Ethernet port supported speeds and protocols. * Access: RO */ MLXSW_ITEM32(reg, ptys, eth_proto_cap, 0x0C, 0, 32); /* reg_ptys_ib_link_width_cap * IB port supported widths. * Access: RO */ MLXSW_ITEM32(reg, ptys, ib_link_width_cap, 0x10, 16, 16); #define MLXSW_REG_PTYS_IB_SPEED_SDR BIT(0) #define MLXSW_REG_PTYS_IB_SPEED_DDR BIT(1) #define MLXSW_REG_PTYS_IB_SPEED_QDR BIT(2) #define MLXSW_REG_PTYS_IB_SPEED_FDR10 BIT(3) #define MLXSW_REG_PTYS_IB_SPEED_FDR BIT(4) #define MLXSW_REG_PTYS_IB_SPEED_EDR BIT(5) /* reg_ptys_ib_proto_cap * IB port supported speeds and protocols. * Access: RO */ MLXSW_ITEM32(reg, ptys, ib_proto_cap, 0x10, 0, 16); /* reg_ptys_eth_proto_admin * Speed and protocol to set port to. * Access: RW */ MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32); /* reg_ptys_ib_link_width_admin * IB width to set port to. * Access: RW */ MLXSW_ITEM32(reg, ptys, ib_link_width_admin, 0x1C, 16, 16); /* reg_ptys_ib_proto_admin * IB speeds and protocols to set port to. * Access: RW */ MLXSW_ITEM32(reg, ptys, ib_proto_admin, 0x1C, 0, 16); /* reg_ptys_eth_proto_oper * The current speed and protocol configured for the port. * Access: RO */ MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32); /* reg_ptys_ib_link_width_oper * The current IB width to set port to. * Access: RO */ MLXSW_ITEM32(reg, ptys, ib_link_width_oper, 0x28, 16, 16); /* reg_ptys_ib_proto_oper * The current IB speed and protocol. * Access: RO */ MLXSW_ITEM32(reg, ptys, ib_proto_oper, 0x28, 0, 16); /* reg_ptys_eth_proto_lp_advertise * The protocols that were advertised by the link partner during * autonegotiation. * Access: RO */ MLXSW_ITEM32(reg, ptys, eth_proto_lp_advertise, 0x30, 0, 32); static inline void mlxsw_reg_ptys_eth_pack(char *payload, u8 local_port, u32 proto_admin) { MLXSW_REG_ZERO(ptys, payload); mlxsw_reg_ptys_local_port_set(payload, local_port); mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH); mlxsw_reg_ptys_eth_proto_admin_set(payload, proto_admin); } static inline void mlxsw_reg_ptys_eth_unpack(char *payload, u32 *p_eth_proto_cap, u32 *p_eth_proto_adm, u32 *p_eth_proto_oper) { if (p_eth_proto_cap) *p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload); if (p_eth_proto_adm) *p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload); if (p_eth_proto_oper) *p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload); } static inline void mlxsw_reg_ptys_ib_pack(char *payload, u8 local_port, u16 proto_admin, u16 link_width) { MLXSW_REG_ZERO(ptys, payload); mlxsw_reg_ptys_local_port_set(payload, local_port); mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_IB); mlxsw_reg_ptys_ib_proto_admin_set(payload, proto_admin); mlxsw_reg_ptys_ib_link_width_admin_set(payload, link_width); } static inline void mlxsw_reg_ptys_ib_unpack(char *payload, u16 *p_ib_proto_cap, u16 *p_ib_link_width_cap, u16 *p_ib_proto_oper, u16 *p_ib_link_width_oper) { if (p_ib_proto_cap) *p_ib_proto_cap = mlxsw_reg_ptys_ib_proto_cap_get(payload); if (p_ib_link_width_cap) *p_ib_link_width_cap = mlxsw_reg_ptys_ib_link_width_cap_get(payload); if (p_ib_proto_oper) *p_ib_proto_oper = mlxsw_reg_ptys_ib_proto_oper_get(payload); if (p_ib_link_width_oper) *p_ib_link_width_oper = mlxsw_reg_ptys_ib_link_width_oper_get(payload); } /* PPAD - Port Physical Address Register * ------------------------------------- * The PPAD register configures the per port physical MAC address. */ #define MLXSW_REG_PPAD_ID 0x5005 #define MLXSW_REG_PPAD_LEN 0x10 MLXSW_REG_DEFINE(ppad, MLXSW_REG_PPAD_ID, MLXSW_REG_PPAD_LEN); /* reg_ppad_single_base_mac * 0: base_mac, local port should be 0 and mac[7:0] is * reserved. HW will set incremental * 1: single_mac - mac of the local_port * Access: RW */ MLXSW_ITEM32(reg, ppad, single_base_mac, 0x00, 28, 1); /* reg_ppad_local_port * port number, if single_base_mac = 0 then local_port is reserved * Access: RW */ MLXSW_ITEM32(reg, ppad, local_port, 0x00, 16, 8); /* reg_ppad_mac * If single_base_mac = 0 - base MAC address, mac[7:0] is reserved. * If single_base_mac = 1 - the per port MAC address * Access: RW */ MLXSW_ITEM_BUF(reg, ppad, mac, 0x02, 6); static inline void mlxsw_reg_ppad_pack(char *payload, bool single_base_mac, u8 local_port) { MLXSW_REG_ZERO(ppad, payload); mlxsw_reg_ppad_single_base_mac_set(payload, !!single_base_mac); mlxsw_reg_ppad_local_port_set(payload, local_port); } /* PAOS - Ports Administrative and Operational Status Register * ----------------------------------------------------------- * Configures and retrieves per port administrative and operational status. */ #define MLXSW_REG_PAOS_ID 0x5006 #define MLXSW_REG_PAOS_LEN 0x10 MLXSW_REG_DEFINE(paos, MLXSW_REG_PAOS_ID, MLXSW_REG_PAOS_LEN); /* reg_paos_swid * Switch partition ID with which to associate the port. * Note: while external ports uses unique local port numbers (and thus swid is * redundant), router ports use the same local port number where swid is the * only indication for the relevant port. * Access: Index */ MLXSW_ITEM32(reg, paos, swid, 0x00, 24, 8); /* reg_paos_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, paos, local_port, 0x00, 16, 8); /* reg_paos_admin_status * Port administrative state (the desired state of the port): * 1 - Up. * 2 - Down. * 3 - Up once. This means that in case of link failure, the port won't go * into polling mode, but will wait to be re-enabled by software. * 4 - Disabled by system. Can only be set by hardware. * Access: RW */ MLXSW_ITEM32(reg, paos, admin_status, 0x00, 8, 4); /* reg_paos_oper_status * Port operational state (the current state): * 1 - Up. * 2 - Down. * 3 - Down by port failure. This means that the device will not let the * port up again until explicitly specified by software. * Access: RO */ MLXSW_ITEM32(reg, paos, oper_status, 0x00, 0, 4); /* reg_paos_ase * Admin state update enabled. * Access: WO */ MLXSW_ITEM32(reg, paos, ase, 0x04, 31, 1); /* reg_paos_ee * Event update enable. If this bit is set, event generation will be * updated based on the e field. * Access: WO */ MLXSW_ITEM32(reg, paos, ee, 0x04, 30, 1); /* reg_paos_e * Event generation on operational state change: * 0 - Do not generate event. * 1 - Generate Event. * 2 - Generate Single Event. * Access: RW */ MLXSW_ITEM32(reg, paos, e, 0x04, 0, 2); static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port, enum mlxsw_port_admin_status status) { MLXSW_REG_ZERO(paos, payload); mlxsw_reg_paos_swid_set(payload, 0); mlxsw_reg_paos_local_port_set(payload, local_port); mlxsw_reg_paos_admin_status_set(payload, status); mlxsw_reg_paos_oper_status_set(payload, 0); mlxsw_reg_paos_ase_set(payload, 1); mlxsw_reg_paos_ee_set(payload, 1); mlxsw_reg_paos_e_set(payload, 1); } /* PFCC - Ports Flow Control Configuration Register * ------------------------------------------------ * Configures and retrieves the per port flow control configuration. */ #define MLXSW_REG_PFCC_ID 0x5007 #define MLXSW_REG_PFCC_LEN 0x20 MLXSW_REG_DEFINE(pfcc, MLXSW_REG_PFCC_ID, MLXSW_REG_PFCC_LEN); /* reg_pfcc_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pfcc, local_port, 0x00, 16, 8); /* reg_pfcc_pnat * Port number access type. Determines the way local_port is interpreted: * 0 - Local port number. * 1 - IB / label port number. * Access: Index */ MLXSW_ITEM32(reg, pfcc, pnat, 0x00, 14, 2); /* reg_pfcc_shl_cap * Send to higher layers capabilities: * 0 - No capability of sending Pause and PFC frames to higher layers. * 1 - Device has capability of sending Pause and PFC frames to higher * layers. * Access: RO */ MLXSW_ITEM32(reg, pfcc, shl_cap, 0x00, 1, 1); /* reg_pfcc_shl_opr * Send to higher layers operation: * 0 - Pause and PFC frames are handled by the port (default). * 1 - Pause and PFC frames are handled by the port and also sent to * higher layers. Only valid if shl_cap = 1. * Access: RW */ MLXSW_ITEM32(reg, pfcc, shl_opr, 0x00, 0, 1); /* reg_pfcc_ppan * Pause policy auto negotiation. * 0 - Disabled. Generate / ignore Pause frames based on pptx / pprtx. * 1 - Enabled. When auto-negotiation is performed, set the Pause policy * based on the auto-negotiation resolution. * Access: RW * * Note: The auto-negotiation advertisement is set according to pptx and * pprtx. When PFC is set on Tx / Rx, ppan must be set to 0. */ MLXSW_ITEM32(reg, pfcc, ppan, 0x04, 28, 4); /* reg_pfcc_prio_mask_tx * Bit per priority indicating if Tx flow control policy should be * updated based on bit pfctx. * Access: WO */ MLXSW_ITEM32(reg, pfcc, prio_mask_tx, 0x04, 16, 8); /* reg_pfcc_prio_mask_rx * Bit per priority indicating if Rx flow control policy should be * updated based on bit pfcrx. * Access: WO */ MLXSW_ITEM32(reg, pfcc, prio_mask_rx, 0x04, 0, 8); /* reg_pfcc_pptx * Admin Pause policy on Tx. * 0 - Never generate Pause frames (default). * 1 - Generate Pause frames according to Rx buffer threshold. * Access: RW */ MLXSW_ITEM32(reg, pfcc, pptx, 0x08, 31, 1); /* reg_pfcc_aptx * Active (operational) Pause policy on Tx. * 0 - Never generate Pause frames. * 1 - Generate Pause frames according to Rx buffer threshold. * Access: RO */ MLXSW_ITEM32(reg, pfcc, aptx, 0x08, 30, 1); /* reg_pfcc_pfctx * Priority based flow control policy on Tx[7:0]. Per-priority bit mask: * 0 - Never generate priority Pause frames on the specified priority * (default). * 1 - Generate priority Pause frames according to Rx buffer threshold on * the specified priority. * Access: RW * * Note: pfctx and pptx must be mutually exclusive. */ MLXSW_ITEM32(reg, pfcc, pfctx, 0x08, 16, 8); /* reg_pfcc_pprx * Admin Pause policy on Rx. * 0 - Ignore received Pause frames (default). * 1 - Respect received Pause frames. * Access: RW */ MLXSW_ITEM32(reg, pfcc, pprx, 0x0C, 31, 1); /* reg_pfcc_aprx * Active (operational) Pause policy on Rx. * 0 - Ignore received Pause frames. * 1 - Respect received Pause frames. * Access: RO */ MLXSW_ITEM32(reg, pfcc, aprx, 0x0C, 30, 1); /* reg_pfcc_pfcrx * Priority based flow control policy on Rx[7:0]. Per-priority bit mask: * 0 - Ignore incoming priority Pause frames on the specified priority * (default). * 1 - Respect incoming priority Pause frames on the specified priority. * Access: RW */ MLXSW_ITEM32(reg, pfcc, pfcrx, 0x0C, 16, 8); #define MLXSW_REG_PFCC_ALL_PRIO 0xFF static inline void mlxsw_reg_pfcc_prio_pack(char *payload, u8 pfc_en) { mlxsw_reg_pfcc_prio_mask_tx_set(payload, MLXSW_REG_PFCC_ALL_PRIO); mlxsw_reg_pfcc_prio_mask_rx_set(payload, MLXSW_REG_PFCC_ALL_PRIO); mlxsw_reg_pfcc_pfctx_set(payload, pfc_en); mlxsw_reg_pfcc_pfcrx_set(payload, pfc_en); } static inline void mlxsw_reg_pfcc_pack(char *payload, u8 local_port) { MLXSW_REG_ZERO(pfcc, payload); mlxsw_reg_pfcc_local_port_set(payload, local_port); } /* PPCNT - Ports Performance Counters Register * ------------------------------------------- * The PPCNT register retrieves per port performance counters. */ #define MLXSW_REG_PPCNT_ID 0x5008 #define MLXSW_REG_PPCNT_LEN 0x100 MLXSW_REG_DEFINE(ppcnt, MLXSW_REG_PPCNT_ID, MLXSW_REG_PPCNT_LEN); /* reg_ppcnt_swid * For HCA: must be always 0. * Switch partition ID to associate port with. * Switch partitions are numbered from 0 to 7 inclusively. * Switch partition 254 indicates stacking ports. * Switch partition 255 indicates all switch partitions. * Only valid on Set() operation with local_port=255. * Access: Index */ MLXSW_ITEM32(reg, ppcnt, swid, 0x00, 24, 8); /* reg_ppcnt_local_port * Local port number. * 255 indicates all ports on the device, and is only allowed * for Set() operation. * Access: Index */ MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8); /* reg_ppcnt_pnat * Port number access type: * 0 - Local port number * 1 - IB port number * Access: Index */ MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2); enum mlxsw_reg_ppcnt_grp { MLXSW_REG_PPCNT_IEEE_8023_CNT = 0x0, MLXSW_REG_PPCNT_PRIO_CNT = 0x10, MLXSW_REG_PPCNT_TC_CNT = 0x11, }; /* reg_ppcnt_grp * Performance counter group. * Group 63 indicates all groups. Only valid on Set() operation with * clr bit set. * 0x0: IEEE 802.3 Counters * 0x1: RFC 2863 Counters * 0x2: RFC 2819 Counters * 0x3: RFC 3635 Counters * 0x5: Ethernet Extended Counters * 0x8: Link Level Retransmission Counters * 0x10: Per Priority Counters * 0x11: Per Traffic Class Counters * 0x12: Physical Layer Counters * Access: Index */ MLXSW_ITEM32(reg, ppcnt, grp, 0x00, 0, 6); /* reg_ppcnt_clr * Clear counters. Setting the clr bit will reset the counter value * for all counters in the counter group. This bit can be set * for both Set() and Get() operation. * Access: OP */ MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1); /* reg_ppcnt_prio_tc * Priority for counter set that support per priority, valid values: 0-7. * Traffic class for counter set that support per traffic class, * valid values: 0- cap_max_tclass-1 . * For HCA: cap_max_tclass is always 8. * Otherwise must be 0. * Access: Index */ MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5); /* Ethernet IEEE 802.3 Counter Group */ /* reg_ppcnt_a_frames_transmitted_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_frames_transmitted_ok, 0x08 + 0x00, 0, 64); /* reg_ppcnt_a_frames_received_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_frames_received_ok, 0x08 + 0x08, 0, 64); /* reg_ppcnt_a_frame_check_sequence_errors * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_frame_check_sequence_errors, 0x08 + 0x10, 0, 64); /* reg_ppcnt_a_alignment_errors * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_alignment_errors, 0x08 + 0x18, 0, 64); /* reg_ppcnt_a_octets_transmitted_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_octets_transmitted_ok, 0x08 + 0x20, 0, 64); /* reg_ppcnt_a_octets_received_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_octets_received_ok, 0x08 + 0x28, 0, 64); /* reg_ppcnt_a_multicast_frames_xmitted_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_xmitted_ok, 0x08 + 0x30, 0, 64); /* reg_ppcnt_a_broadcast_frames_xmitted_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_xmitted_ok, 0x08 + 0x38, 0, 64); /* reg_ppcnt_a_multicast_frames_received_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_received_ok, 0x08 + 0x40, 0, 64); /* reg_ppcnt_a_broadcast_frames_received_ok * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_received_ok, 0x08 + 0x48, 0, 64); /* reg_ppcnt_a_in_range_length_errors * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_in_range_length_errors, 0x08 + 0x50, 0, 64); /* reg_ppcnt_a_out_of_range_length_field * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_out_of_range_length_field, 0x08 + 0x58, 0, 64); /* reg_ppcnt_a_frame_too_long_errors * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_frame_too_long_errors, 0x08 + 0x60, 0, 64); /* reg_ppcnt_a_symbol_error_during_carrier * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_symbol_error_during_carrier, 0x08 + 0x68, 0, 64); /* reg_ppcnt_a_mac_control_frames_transmitted * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_transmitted, 0x08 + 0x70, 0, 64); /* reg_ppcnt_a_mac_control_frames_received * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_received, 0x08 + 0x78, 0, 64); /* reg_ppcnt_a_unsupported_opcodes_received * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_unsupported_opcodes_received, 0x08 + 0x80, 0, 64); /* reg_ppcnt_a_pause_mac_ctrl_frames_received * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received, 0x08 + 0x88, 0, 64); /* reg_ppcnt_a_pause_mac_ctrl_frames_transmitted * Access: RO */ MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted, 0x08 + 0x90, 0, 64); /* Ethernet Per Priority Group Counters */ /* reg_ppcnt_rx_octets * Access: RO */ MLXSW_ITEM64(reg, ppcnt, rx_octets, 0x08 + 0x00, 0, 64); /* reg_ppcnt_rx_frames * Access: RO */ MLXSW_ITEM64(reg, ppcnt, rx_frames, 0x08 + 0x20, 0, 64); /* reg_ppcnt_tx_octets * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tx_octets, 0x08 + 0x28, 0, 64); /* reg_ppcnt_tx_frames * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tx_frames, 0x08 + 0x48, 0, 64); /* reg_ppcnt_rx_pause * Access: RO */ MLXSW_ITEM64(reg, ppcnt, rx_pause, 0x08 + 0x50, 0, 64); /* reg_ppcnt_rx_pause_duration * Access: RO */ MLXSW_ITEM64(reg, ppcnt, rx_pause_duration, 0x08 + 0x58, 0, 64); /* reg_ppcnt_tx_pause * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tx_pause, 0x08 + 0x60, 0, 64); /* reg_ppcnt_tx_pause_duration * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tx_pause_duration, 0x08 + 0x68, 0, 64); /* reg_ppcnt_rx_pause_transition * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tx_pause_transition, 0x08 + 0x70, 0, 64); /* Ethernet Per Traffic Group Counters */ /* reg_ppcnt_tc_transmit_queue * Contains the transmit queue depth in cells of traffic class * selected by prio_tc and the port selected by local_port. * The field cannot be cleared. * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tc_transmit_queue, 0x08 + 0x00, 0, 64); /* reg_ppcnt_tc_no_buffer_discard_uc * The number of unicast packets dropped due to lack of shared * buffer resources. * Access: RO */ MLXSW_ITEM64(reg, ppcnt, tc_no_buffer_discard_uc, 0x08 + 0x08, 0, 64); static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port, enum mlxsw_reg_ppcnt_grp grp, u8 prio_tc) { MLXSW_REG_ZERO(ppcnt, payload); mlxsw_reg_ppcnt_swid_set(payload, 0); mlxsw_reg_ppcnt_local_port_set(payload, local_port); mlxsw_reg_ppcnt_pnat_set(payload, 0); mlxsw_reg_ppcnt_grp_set(payload, grp); mlxsw_reg_ppcnt_clr_set(payload, 0); mlxsw_reg_ppcnt_prio_tc_set(payload, prio_tc); } /* PLIB - Port Local to InfiniBand Port * ------------------------------------ * The PLIB register performs mapping from Local Port into InfiniBand Port. */ #define MLXSW_REG_PLIB_ID 0x500A #define MLXSW_REG_PLIB_LEN 0x10 MLXSW_REG_DEFINE(plib, MLXSW_REG_PLIB_ID, MLXSW_REG_PLIB_LEN); /* reg_plib_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, plib, local_port, 0x00, 16, 8); /* reg_plib_ib_port * InfiniBand port remapping for local_port. * Access: RW */ MLXSW_ITEM32(reg, plib, ib_port, 0x00, 0, 8); /* PPTB - Port Prio To Buffer Register * ----------------------------------- * Configures the switch priority to buffer table. */ #define MLXSW_REG_PPTB_ID 0x500B #define MLXSW_REG_PPTB_LEN 0x10 MLXSW_REG_DEFINE(pptb, MLXSW_REG_PPTB_ID, MLXSW_REG_PPTB_LEN); enum { MLXSW_REG_PPTB_MM_UM, MLXSW_REG_PPTB_MM_UNICAST, MLXSW_REG_PPTB_MM_MULTICAST, }; /* reg_pptb_mm * Mapping mode. * 0 - Map both unicast and multicast packets to the same buffer. * 1 - Map only unicast packets. * 2 - Map only multicast packets. * Access: Index * * Note: SwitchX-2 only supports the first option. */ MLXSW_ITEM32(reg, pptb, mm, 0x00, 28, 2); /* reg_pptb_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pptb, local_port, 0x00, 16, 8); /* reg_pptb_um * Enables the update of the untagged_buf field. * Access: RW */ MLXSW_ITEM32(reg, pptb, um, 0x00, 8, 1); /* reg_pptb_pm * Enables the update of the prio_to_buff field. * Bit is a flag for updating the mapping for switch priority . * Access: RW */ MLXSW_ITEM32(reg, pptb, pm, 0x00, 0, 8); /* reg_pptb_prio_to_buff * Mapping of switch priority to one of the allocated receive port * buffers. * Access: RW */ MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff, 0x04, 0x04, 4); /* reg_pptb_pm_msb * Enables the update of the prio_to_buff field. * Bit is a flag for updating the mapping for switch priority . * Access: RW */ MLXSW_ITEM32(reg, pptb, pm_msb, 0x08, 24, 8); /* reg_pptb_untagged_buff * Mapping of untagged frames to one of the allocated receive port buffers. * Access: RW * * Note: In SwitchX-2 this field must be mapped to buffer 8. Reserved for * Spectrum, as it maps untagged packets based on the default switch priority. */ MLXSW_ITEM32(reg, pptb, untagged_buff, 0x08, 0, 4); /* reg_pptb_prio_to_buff_msb * Mapping of switch priority to one of the allocated receive port * buffers. * Access: RW */ MLXSW_ITEM_BIT_ARRAY(reg, pptb, prio_to_buff_msb, 0x0C, 0x04, 4); #define MLXSW_REG_PPTB_ALL_PRIO 0xFF static inline void mlxsw_reg_pptb_pack(char *payload, u8 local_port) { MLXSW_REG_ZERO(pptb, payload); mlxsw_reg_pptb_mm_set(payload, MLXSW_REG_PPTB_MM_UM); mlxsw_reg_pptb_local_port_set(payload, local_port); mlxsw_reg_pptb_pm_set(payload, MLXSW_REG_PPTB_ALL_PRIO); mlxsw_reg_pptb_pm_msb_set(payload, MLXSW_REG_PPTB_ALL_PRIO); } static inline void mlxsw_reg_pptb_prio_to_buff_pack(char *payload, u8 prio, u8 buff) { mlxsw_reg_pptb_prio_to_buff_set(payload, prio, buff); mlxsw_reg_pptb_prio_to_buff_msb_set(payload, prio, buff); } /* PBMC - Port Buffer Management Control Register * ---------------------------------------------- * The PBMC register configures and retrieves the port packet buffer * allocation for different Prios, and the Pause threshold management. */ #define MLXSW_REG_PBMC_ID 0x500C #define MLXSW_REG_PBMC_LEN 0x6C MLXSW_REG_DEFINE(pbmc, MLXSW_REG_PBMC_ID, MLXSW_REG_PBMC_LEN); /* reg_pbmc_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pbmc, local_port, 0x00, 16, 8); /* reg_pbmc_xoff_timer_value * When device generates a pause frame, it uses this value as the pause * timer (time for the peer port to pause in quota-512 bit time). * Access: RW */ MLXSW_ITEM32(reg, pbmc, xoff_timer_value, 0x04, 16, 16); /* reg_pbmc_xoff_refresh * The time before a new pause frame should be sent to refresh the pause RW * state. Using the same units as xoff_timer_value above (in quota-512 bit * time). * Access: RW */ MLXSW_ITEM32(reg, pbmc, xoff_refresh, 0x04, 0, 16); #define MLXSW_REG_PBMC_PORT_SHARED_BUF_IDX 11 /* reg_pbmc_buf_lossy * The field indicates if the buffer is lossy. * 0 - Lossless * 1 - Lossy * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_lossy, 0x0C, 25, 1, 0x08, 0x00, false); /* reg_pbmc_buf_epsb * Eligible for Port Shared buffer. * If epsb is set, packets assigned to buffer are allowed to insert the port * shared buffer. * When buf_lossy is MLXSW_REG_PBMC_LOSSY_LOSSY this field is reserved. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_epsb, 0x0C, 24, 1, 0x08, 0x00, false); /* reg_pbmc_buf_size * The part of the packet buffer array is allocated for the specific buffer. * Units are represented in cells. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_size, 0x0C, 0, 16, 0x08, 0x00, false); /* reg_pbmc_buf_xoff_threshold * Once the amount of data in the buffer goes above this value, device * starts sending PFC frames for all priorities associated with the * buffer. Units are represented in cells. Reserved in case of lossy * buffer. * Access: RW * * Note: In Spectrum, reserved for buffer[9]. */ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_xoff_threshold, 0x0C, 16, 16, 0x08, 0x04, false); /* reg_pbmc_buf_xon_threshold * When the amount of data in the buffer goes below this value, device * stops sending PFC frames for the priorities associated with the * buffer. Units are represented in cells. Reserved in case of lossy * buffer. * Access: RW * * Note: In Spectrum, reserved for buffer[9]. */ MLXSW_ITEM32_INDEXED(reg, pbmc, buf_xon_threshold, 0x0C, 0, 16, 0x08, 0x04, false); static inline void mlxsw_reg_pbmc_pack(char *payload, u8 local_port, u16 xoff_timer_value, u16 xoff_refresh) { MLXSW_REG_ZERO(pbmc, payload); mlxsw_reg_pbmc_local_port_set(payload, local_port); mlxsw_reg_pbmc_xoff_timer_value_set(payload, xoff_timer_value); mlxsw_reg_pbmc_xoff_refresh_set(payload, xoff_refresh); } static inline void mlxsw_reg_pbmc_lossy_buffer_pack(char *payload, int buf_index, u16 size) { mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 1); mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0); mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size); } static inline void mlxsw_reg_pbmc_lossless_buffer_pack(char *payload, int buf_index, u16 size, u16 threshold) { mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 0); mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0); mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size); mlxsw_reg_pbmc_buf_xoff_threshold_set(payload, buf_index, threshold); mlxsw_reg_pbmc_buf_xon_threshold_set(payload, buf_index, threshold); } /* PSPA - Port Switch Partition Allocation * --------------------------------------- * Controls the association of a port with a switch partition and enables * configuring ports as stacking ports. */ #define MLXSW_REG_PSPA_ID 0x500D #define MLXSW_REG_PSPA_LEN 0x8 MLXSW_REG_DEFINE(pspa, MLXSW_REG_PSPA_ID, MLXSW_REG_PSPA_LEN); /* reg_pspa_swid * Switch partition ID. * Access: RW */ MLXSW_ITEM32(reg, pspa, swid, 0x00, 24, 8); /* reg_pspa_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pspa, local_port, 0x00, 16, 8); /* reg_pspa_sub_port * Virtual port within the local port. Set to 0 when virtual ports are * disabled on the local port. * Access: Index */ MLXSW_ITEM32(reg, pspa, sub_port, 0x00, 8, 8); static inline void mlxsw_reg_pspa_pack(char *payload, u8 swid, u8 local_port) { MLXSW_REG_ZERO(pspa, payload); mlxsw_reg_pspa_swid_set(payload, swid); mlxsw_reg_pspa_local_port_set(payload, local_port); mlxsw_reg_pspa_sub_port_set(payload, 0); } /* HTGT - Host Trap Group Table * ---------------------------- * Configures the properties for forwarding to CPU. */ #define MLXSW_REG_HTGT_ID 0x7002 #define MLXSW_REG_HTGT_LEN 0x20 MLXSW_REG_DEFINE(htgt, MLXSW_REG_HTGT_ID, MLXSW_REG_HTGT_LEN); /* reg_htgt_swid * Switch partition ID. * Access: Index */ MLXSW_ITEM32(reg, htgt, swid, 0x00, 24, 8); #define MLXSW_REG_HTGT_PATH_TYPE_LOCAL 0x0 /* For locally attached CPU */ /* reg_htgt_type * CPU path type. * Access: RW */ MLXSW_ITEM32(reg, htgt, type, 0x00, 8, 4); enum mlxsw_reg_htgt_trap_group { MLXSW_REG_HTGT_TRAP_GROUP_EMAD, MLXSW_REG_HTGT_TRAP_GROUP_SX2_RX, MLXSW_REG_HTGT_TRAP_GROUP_SX2_CTRL, MLXSW_REG_HTGT_TRAP_GROUP_SP_STP, MLXSW_REG_HTGT_TRAP_GROUP_SP_LACP, MLXSW_REG_HTGT_TRAP_GROUP_SP_LLDP, MLXSW_REG_HTGT_TRAP_GROUP_SP_IGMP, MLXSW_REG_HTGT_TRAP_GROUP_SP_BGP, MLXSW_REG_HTGT_TRAP_GROUP_SP_OSPF, MLXSW_REG_HTGT_TRAP_GROUP_SP_ARP, MLXSW_REG_HTGT_TRAP_GROUP_SP_HOST_MISS, MLXSW_REG_HTGT_TRAP_GROUP_SP_ROUTER_EXP, MLXSW_REG_HTGT_TRAP_GROUP_SP_REMOTE_ROUTE, MLXSW_REG_HTGT_TRAP_GROUP_SP_IP2ME, MLXSW_REG_HTGT_TRAP_GROUP_SP_DHCP, MLXSW_REG_HTGT_TRAP_GROUP_SP_EVENT, MLXSW_REG_HTGT_TRAP_GROUP_SP_IPV6_MLD, MLXSW_REG_HTGT_TRAP_GROUP_SP_IPV6_ND, }; /* reg_htgt_trap_group * Trap group number. User defined number specifying which trap groups * should be forwarded to the CPU. The mapping between trap IDs and trap * groups is configured using HPKT register. * Access: Index */ MLXSW_ITEM32(reg, htgt, trap_group, 0x00, 0, 8); enum { MLXSW_REG_HTGT_POLICER_DISABLE, MLXSW_REG_HTGT_POLICER_ENABLE, }; /* reg_htgt_pide * Enable policer ID specified using 'pid' field. * Access: RW */ MLXSW_ITEM32(reg, htgt, pide, 0x04, 15, 1); #define MLXSW_REG_HTGT_INVALID_POLICER 0xff /* reg_htgt_pid * Policer ID for the trap group. * Access: RW */ MLXSW_ITEM32(reg, htgt, pid, 0x04, 0, 8); #define MLXSW_REG_HTGT_TRAP_TO_CPU 0x0 /* reg_htgt_mirror_action * Mirror action to use. * 0 - Trap to CPU. * 1 - Trap to CPU and mirror to a mirroring agent. * 2 - Mirror to a mirroring agent and do not trap to CPU. * Access: RW * * Note: Mirroring to a mirroring agent is only supported in Spectrum. */ MLXSW_ITEM32(reg, htgt, mirror_action, 0x08, 8, 2); /* reg_htgt_mirroring_agent * Mirroring agent. * Access: RW */ MLXSW_ITEM32(reg, htgt, mirroring_agent, 0x08, 0, 3); #define MLXSW_REG_HTGT_DEFAULT_PRIORITY 0 /* reg_htgt_priority * Trap group priority. * In case a packet matches multiple classification rules, the packet will * only be trapped once, based on the trap ID associated with the group (via * register HPKT) with the highest priority. * Supported values are 0-7, with 7 represnting the highest priority. * Access: RW * * Note: In SwitchX-2 this field is ignored and the priority value is replaced * by the 'trap_group' field. */ MLXSW_ITEM32(reg, htgt, priority, 0x0C, 0, 4); #define MLXSW_REG_HTGT_DEFAULT_TC 7 /* reg_htgt_local_path_cpu_tclass * CPU ingress traffic class for the trap group. * Access: RW */ MLXSW_ITEM32(reg, htgt, local_path_cpu_tclass, 0x10, 16, 6); enum mlxsw_reg_htgt_local_path_rdq { MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SX2_CTRL = 0x13, MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SX2_RX = 0x14, MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SX2_EMAD = 0x15, MLXSW_REG_HTGT_LOCAL_PATH_RDQ_SIB_EMAD = 0x15, }; /* reg_htgt_local_path_rdq * Receive descriptor queue (RDQ) to use for the trap group. * Access: RW */ MLXSW_ITEM32(reg, htgt, local_path_rdq, 0x10, 0, 6); static inline void mlxsw_reg_htgt_pack(char *payload, u8 group, u8 policer_id, u8 priority, u8 tc) { MLXSW_REG_ZERO(htgt, payload); if (policer_id == MLXSW_REG_HTGT_INVALID_POLICER) { mlxsw_reg_htgt_pide_set(payload, MLXSW_REG_HTGT_POLICER_DISABLE); } else { mlxsw_reg_htgt_pide_set(payload, MLXSW_REG_HTGT_POLICER_ENABLE); mlxsw_reg_htgt_pid_set(payload, policer_id); } mlxsw_reg_htgt_type_set(payload, MLXSW_REG_HTGT_PATH_TYPE_LOCAL); mlxsw_reg_htgt_trap_group_set(payload, group); mlxsw_reg_htgt_mirror_action_set(payload, MLXSW_REG_HTGT_TRAP_TO_CPU); mlxsw_reg_htgt_mirroring_agent_set(payload, 0); mlxsw_reg_htgt_priority_set(payload, priority); mlxsw_reg_htgt_local_path_cpu_tclass_set(payload, tc); mlxsw_reg_htgt_local_path_rdq_set(payload, group); } /* HPKT - Host Packet Trap * ----------------------- * Configures trap IDs inside trap groups. */ #define MLXSW_REG_HPKT_ID 0x7003 #define MLXSW_REG_HPKT_LEN 0x10 MLXSW_REG_DEFINE(hpkt, MLXSW_REG_HPKT_ID, MLXSW_REG_HPKT_LEN); enum { MLXSW_REG_HPKT_ACK_NOT_REQUIRED, MLXSW_REG_HPKT_ACK_REQUIRED, }; /* reg_hpkt_ack * Require acknowledgements from the host for events. * If set, then the device will wait for the event it sent to be acknowledged * by the host. This option is only relevant for event trap IDs. * Access: RW * * Note: Currently not supported by firmware. */ MLXSW_ITEM32(reg, hpkt, ack, 0x00, 24, 1); enum mlxsw_reg_hpkt_action { MLXSW_REG_HPKT_ACTION_FORWARD, MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU, MLXSW_REG_HPKT_ACTION_MIRROR_TO_CPU, MLXSW_REG_HPKT_ACTION_DISCARD, MLXSW_REG_HPKT_ACTION_SOFT_DISCARD, MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD, }; /* reg_hpkt_action * Action to perform on packet when trapped. * 0 - No action. Forward to CPU based on switching rules. * 1 - Trap to CPU (CPU receives sole copy). * 2 - Mirror to CPU (CPU receives a replica of the packet). * 3 - Discard. * 4 - Soft discard (allow other traps to act on the packet). * 5 - Trap and soft discard (allow other traps to overwrite this trap). * Access: RW * * Note: Must be set to 0 (forward) for event trap IDs, as they are already * addressed to the CPU. */ MLXSW_ITEM32(reg, hpkt, action, 0x00, 20, 3); /* reg_hpkt_trap_group * Trap group to associate the trap with. * Access: RW */ MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6); /* reg_hpkt_trap_id * Trap ID. * Access: Index * * Note: A trap ID can only be associated with a single trap group. The device * will associate the trap ID with the last trap group configured. */ MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9); enum { MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT, MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER, MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER, }; /* reg_hpkt_ctrl * Configure dedicated buffer resources for control packets. * Ignored by SwitchX-2. * 0 - Keep factory defaults. * 1 - Do not use control buffer for this trap ID. * 2 - Use control buffer for this trap ID. * Access: RW */ MLXSW_ITEM32(reg, hpkt, ctrl, 0x04, 16, 2); static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action, u16 trap_id, enum mlxsw_reg_htgt_trap_group trap_group, bool is_ctrl) { MLXSW_REG_ZERO(hpkt, payload); mlxsw_reg_hpkt_ack_set(payload, MLXSW_REG_HPKT_ACK_NOT_REQUIRED); mlxsw_reg_hpkt_action_set(payload, action); mlxsw_reg_hpkt_trap_group_set(payload, trap_group); mlxsw_reg_hpkt_trap_id_set(payload, trap_id); mlxsw_reg_hpkt_ctrl_set(payload, is_ctrl ? MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER : MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER); } /* RGCR - Router General Configuration Register * -------------------------------------------- * The register is used for setting up the router configuration. */ #define MLXSW_REG_RGCR_ID 0x8001 #define MLXSW_REG_RGCR_LEN 0x28 MLXSW_REG_DEFINE(rgcr, MLXSW_REG_RGCR_ID, MLXSW_REG_RGCR_LEN); /* reg_rgcr_ipv4_en * IPv4 router enable. * Access: RW */ MLXSW_ITEM32(reg, rgcr, ipv4_en, 0x00, 31, 1); /* reg_rgcr_ipv6_en * IPv6 router enable. * Access: RW */ MLXSW_ITEM32(reg, rgcr, ipv6_en, 0x00, 30, 1); /* reg_rgcr_max_router_interfaces * Defines the maximum number of active router interfaces for all virtual * routers. * Access: RW */ MLXSW_ITEM32(reg, rgcr, max_router_interfaces, 0x10, 0, 16); /* reg_rgcr_usp * Update switch priority and packet color. * 0 - Preserve the value of Switch Priority and packet color. * 1 - Recalculate the value of Switch Priority and packet color. * Access: RW * * Note: Not supported by SwitchX and SwitchX-2. */ MLXSW_ITEM32(reg, rgcr, usp, 0x18, 20, 1); /* reg_rgcr_pcp_rw * Indicates how to handle the pcp_rewrite_en value: * 0 - Preserve the value of pcp_rewrite_en. * 2 - Disable PCP rewrite. * 3 - Enable PCP rewrite. * Access: RW * * Note: Not supported by SwitchX and SwitchX-2. */ MLXSW_ITEM32(reg, rgcr, pcp_rw, 0x18, 16, 2); /* reg_rgcr_activity_dis * Activity disable: * 0 - Activity will be set when an entry is hit (default). * 1 - Activity will not be set when an entry is hit. * * Bit 0 - Disable activity bit in Router Algorithmic LPM Unicast Entry * (RALUE). * Bit 1 - Disable activity bit in Router Algorithmic LPM Unicast Host * Entry (RAUHT). * Bits 2:7 are reserved. * Access: RW * * Note: Not supported by SwitchX, SwitchX-2 and Switch-IB. */ MLXSW_ITEM32(reg, rgcr, activity_dis, 0x20, 0, 8); static inline void mlxsw_reg_rgcr_pack(char *payload, bool ipv4_en, bool ipv6_en) { MLXSW_REG_ZERO(rgcr, payload); mlxsw_reg_rgcr_ipv4_en_set(payload, ipv4_en); mlxsw_reg_rgcr_ipv6_en_set(payload, ipv6_en); } /* RITR - Router Interface Table Register * -------------------------------------- * The register is used to configure the router interface table. */ #define MLXSW_REG_RITR_ID 0x8002 #define MLXSW_REG_RITR_LEN 0x40 MLXSW_REG_DEFINE(ritr, MLXSW_REG_RITR_ID, MLXSW_REG_RITR_LEN); /* reg_ritr_enable * Enables routing on the router interface. * Access: RW */ MLXSW_ITEM32(reg, ritr, enable, 0x00, 31, 1); /* reg_ritr_ipv4 * IPv4 routing enable. Enables routing of IPv4 traffic on the router * interface. * Access: RW */ MLXSW_ITEM32(reg, ritr, ipv4, 0x00, 29, 1); /* reg_ritr_ipv6 * IPv6 routing enable. Enables routing of IPv6 traffic on the router * interface. * Access: RW */ MLXSW_ITEM32(reg, ritr, ipv6, 0x00, 28, 1); enum mlxsw_reg_ritr_if_type { /* VLAN interface. */ MLXSW_REG_RITR_VLAN_IF, /* FID interface. */ MLXSW_REG_RITR_FID_IF, /* Sub-port interface. */ MLXSW_REG_RITR_SP_IF, /* Loopback Interface. */ MLXSW_REG_RITR_LOOPBACK_IF, }; /* reg_ritr_type * Router interface type as per enum mlxsw_reg_ritr_if_type. * Access: RW */ MLXSW_ITEM32(reg, ritr, type, 0x00, 23, 3); enum { MLXSW_REG_RITR_RIF_CREATE, MLXSW_REG_RITR_RIF_DEL, }; /* reg_ritr_op * Opcode: * 0 - Create or edit RIF. * 1 - Delete RIF. * Reserved for SwitchX-2. For Spectrum, editing of interface properties * is not supported. An interface must be deleted and re-created in order * to update properties. * Access: WO */ MLXSW_ITEM32(reg, ritr, op, 0x00, 20, 2); /* reg_ritr_rif * Router interface index. A pointer to the Router Interface Table. * Access: Index */ MLXSW_ITEM32(reg, ritr, rif, 0x00, 0, 16); /* reg_ritr_ipv4_fe * IPv4 Forwarding Enable. * Enables routing of IPv4 traffic on the router interface. When disabled, * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. * Not supported in SwitchX-2. * Access: RW */ MLXSW_ITEM32(reg, ritr, ipv4_fe, 0x04, 29, 1); /* reg_ritr_ipv6_fe * IPv6 Forwarding Enable. * Enables routing of IPv6 traffic on the router interface. When disabled, * forwarding is blocked but local traffic (traps and IP2ME) will be enabled. * Not supported in SwitchX-2. * Access: RW */ MLXSW_ITEM32(reg, ritr, ipv6_fe, 0x04, 28, 1); /* reg_ritr_lb_en * Loop-back filter enable for unicast packets. * If the flag is set then loop-back filter for unicast packets is * implemented on the RIF. Multicast packets are always subject to * loop-back filtering. * Access: RW */ MLXSW_ITEM32(reg, ritr, lb_en, 0x04, 24, 1); /* reg_ritr_virtual_router * Virtual router ID associated with the router interface. * Access: RW */ MLXSW_ITEM32(reg, ritr, virtual_router, 0x04, 0, 16); /* reg_ritr_mtu * Router interface MTU. * Access: RW */ MLXSW_ITEM32(reg, ritr, mtu, 0x34, 0, 16); /* reg_ritr_if_swid * Switch partition ID. * Access: RW */ MLXSW_ITEM32(reg, ritr, if_swid, 0x08, 24, 8); /* reg_ritr_if_mac * Router interface MAC address. * In Spectrum, all MAC addresses must have the same 38 MSBits. * Access: RW */ MLXSW_ITEM_BUF(reg, ritr, if_mac, 0x12, 6); /* VLAN Interface */ /* reg_ritr_vlan_if_vid * VLAN ID. * Access: RW */ MLXSW_ITEM32(reg, ritr, vlan_if_vid, 0x08, 0, 12); /* FID Interface */ /* reg_ritr_fid_if_fid * Filtering ID. Used to connect a bridge to the router. Only FIDs from * the vFID range are supported. * Access: RW */ MLXSW_ITEM32(reg, ritr, fid_if_fid, 0x08, 0, 16); static inline void mlxsw_reg_ritr_fid_set(char *payload, enum mlxsw_reg_ritr_if_type rif_type, u16 fid) { if (rif_type == MLXSW_REG_RITR_FID_IF) mlxsw_reg_ritr_fid_if_fid_set(payload, fid); else mlxsw_reg_ritr_vlan_if_vid_set(payload, fid); } /* Sub-port Interface */ /* reg_ritr_sp_if_lag * LAG indication. When this bit is set the system_port field holds the * LAG identifier. * Access: RW */ MLXSW_ITEM32(reg, ritr, sp_if_lag, 0x08, 24, 1); /* reg_ritr_sp_system_port * Port unique indentifier. When lag bit is set, this field holds the * lag_id in bits 0:9. * Access: RW */ MLXSW_ITEM32(reg, ritr, sp_if_system_port, 0x08, 0, 16); /* reg_ritr_sp_if_vid * VLAN ID. * Access: RW */ MLXSW_ITEM32(reg, ritr, sp_if_vid, 0x18, 0, 12); /* Loopback Interface */ enum mlxsw_reg_ritr_loopback_protocol { /* IPinIP IPv4 underlay Unicast */ MLXSW_REG_RITR_LOOPBACK_PROTOCOL_IPIP_IPV4, /* IPinIP IPv6 underlay Unicast */ MLXSW_REG_RITR_LOOPBACK_PROTOCOL_IPIP_IPV6, }; /* reg_ritr_loopback_protocol * Access: RW */ MLXSW_ITEM32(reg, ritr, loopback_protocol, 0x08, 28, 4); enum mlxsw_reg_ritr_loopback_ipip_type { /* Tunnel is IPinIP. */ MLXSW_REG_RITR_LOOPBACK_IPIP_TYPE_IP_IN_IP, /* Tunnel is GRE, no key. */ MLXSW_REG_RITR_LOOPBACK_IPIP_TYPE_IP_IN_GRE_IN_IP, /* Tunnel is GRE, with a key. */ MLXSW_REG_RITR_LOOPBACK_IPIP_TYPE_IP_IN_GRE_KEY_IN_IP, }; /* reg_ritr_loopback_ipip_type * Encapsulation type. * Access: RW */ MLXSW_ITEM32(reg, ritr, loopback_ipip_type, 0x10, 24, 4); enum mlxsw_reg_ritr_loopback_ipip_options { /* The key is defined by gre_key. */ MLXSW_REG_RITR_LOOPBACK_IPIP_OPTIONS_GRE_KEY_PRESET, }; /* reg_ritr_loopback_ipip_options * Access: RW */ MLXSW_ITEM32(reg, ritr, loopback_ipip_options, 0x10, 20, 4); /* reg_ritr_loopback_ipip_uvr * Underlay Virtual Router ID. * Range is 0..cap_max_virtual_routers-1. * Reserved for Spectrum-2. * Access: RW */ MLXSW_ITEM32(reg, ritr, loopback_ipip_uvr, 0x10, 0, 16); /* reg_ritr_loopback_ipip_usip* * Encapsulation Underlay source IP. * Access: RW */ MLXSW_ITEM_BUF(reg, ritr, loopback_ipip_usip6, 0x18, 16); MLXSW_ITEM32(reg, ritr, loopback_ipip_usip4, 0x24, 0, 32); /* reg_ritr_loopback_ipip_gre_key * GRE Key. * Reserved when ipip_type is not IP_IN_GRE_KEY_IN_IP. * Access: RW */ MLXSW_ITEM32(reg, ritr, loopback_ipip_gre_key, 0x28, 0, 32); /* Shared between ingress/egress */ enum mlxsw_reg_ritr_counter_set_type { /* No Count. */ MLXSW_REG_RITR_COUNTER_SET_TYPE_NO_COUNT = 0x0, /* Basic. Used for router interfaces, counting the following: * - Error and Discard counters. * - Unicast, Multicast and Broadcast counters. Sharing the * same set of counters for the different type of traffic * (IPv4, IPv6 and mpls). */ MLXSW_REG_RITR_COUNTER_SET_TYPE_BASIC = 0x9, }; /* reg_ritr_ingress_counter_index * Counter Index for flow counter. * Access: RW */ MLXSW_ITEM32(reg, ritr, ingress_counter_index, 0x38, 0, 24); /* reg_ritr_ingress_counter_set_type * Igress Counter Set Type for router interface counter. * Access: RW */ MLXSW_ITEM32(reg, ritr, ingress_counter_set_type, 0x38, 24, 8); /* reg_ritr_egress_counter_index * Counter Index for flow counter. * Access: RW */ MLXSW_ITEM32(reg, ritr, egress_counter_index, 0x3C, 0, 24); /* reg_ritr_egress_counter_set_type * Egress Counter Set Type for router interface counter. * Access: RW */ MLXSW_ITEM32(reg, ritr, egress_counter_set_type, 0x3C, 24, 8); static inline void mlxsw_reg_ritr_counter_pack(char *payload, u32 index, bool enable, bool egress) { enum mlxsw_reg_ritr_counter_set_type set_type; if (enable) set_type = MLXSW_REG_RITR_COUNTER_SET_TYPE_BASIC; else set_type = MLXSW_REG_RITR_COUNTER_SET_TYPE_NO_COUNT; mlxsw_reg_ritr_egress_counter_set_type_set(payload, set_type); if (egress) mlxsw_reg_ritr_egress_counter_index_set(payload, index); else mlxsw_reg_ritr_ingress_counter_index_set(payload, index); } static inline void mlxsw_reg_ritr_rif_pack(char *payload, u16 rif) { MLXSW_REG_ZERO(ritr, payload); mlxsw_reg_ritr_rif_set(payload, rif); } static inline void mlxsw_reg_ritr_sp_if_pack(char *payload, bool lag, u16 system_port, u16 vid) { mlxsw_reg_ritr_sp_if_lag_set(payload, lag); mlxsw_reg_ritr_sp_if_system_port_set(payload, system_port); mlxsw_reg_ritr_sp_if_vid_set(payload, vid); } static inline void mlxsw_reg_ritr_pack(char *payload, bool enable, enum mlxsw_reg_ritr_if_type type, u16 rif, u16 vr_id, u16 mtu) { bool op = enable ? MLXSW_REG_RITR_RIF_CREATE : MLXSW_REG_RITR_RIF_DEL; MLXSW_REG_ZERO(ritr, payload); mlxsw_reg_ritr_enable_set(payload, enable); mlxsw_reg_ritr_ipv4_set(payload, 1); mlxsw_reg_ritr_ipv6_set(payload, 1); mlxsw_reg_ritr_type_set(payload, type); mlxsw_reg_ritr_op_set(payload, op); mlxsw_reg_ritr_rif_set(payload, rif); mlxsw_reg_ritr_ipv4_fe_set(payload, 1); mlxsw_reg_ritr_ipv6_fe_set(payload, 1); mlxsw_reg_ritr_lb_en_set(payload, 1); mlxsw_reg_ritr_virtual_router_set(payload, vr_id); mlxsw_reg_ritr_mtu_set(payload, mtu); } static inline void mlxsw_reg_ritr_mac_pack(char *payload, const char *mac) { mlxsw_reg_ritr_if_mac_memcpy_to(payload, mac); } static inline void mlxsw_reg_ritr_loopback_ipip_common_pack(char *payload, enum mlxsw_reg_ritr_loopback_ipip_type ipip_type, enum mlxsw_reg_ritr_loopback_ipip_options options, u16 uvr_id, u32 gre_key) { mlxsw_reg_ritr_loopback_ipip_type_set(payload, ipip_type); mlxsw_reg_ritr_loopback_ipip_options_set(payload, options); mlxsw_reg_ritr_loopback_ipip_uvr_set(payload, uvr_id); mlxsw_reg_ritr_loopback_ipip_gre_key_set(payload, gre_key); } static inline void mlxsw_reg_ritr_loopback_ipip4_pack(char *payload, enum mlxsw_reg_ritr_loopback_ipip_type ipip_type, enum mlxsw_reg_ritr_loopback_ipip_options options, u16 uvr_id, u32 usip, u32 gre_key) { mlxsw_reg_ritr_loopback_protocol_set(payload, MLXSW_REG_RITR_LOOPBACK_PROTOCOL_IPIP_IPV4); mlxsw_reg_ritr_loopback_ipip_common_pack(payload, ipip_type, options, uvr_id, gre_key); mlxsw_reg_ritr_loopback_ipip_usip4_set(payload, usip); } /* RATR - Router Adjacency Table Register * -------------------------------------- * The RATR register is used to configure the Router Adjacency (next-hop) * Table. */ #define MLXSW_REG_RATR_ID 0x8008 #define MLXSW_REG_RATR_LEN 0x2C MLXSW_REG_DEFINE(ratr, MLXSW_REG_RATR_ID, MLXSW_REG_RATR_LEN); enum mlxsw_reg_ratr_op { /* Read */ MLXSW_REG_RATR_OP_QUERY_READ = 0, /* Read and clear activity */ MLXSW_REG_RATR_OP_QUERY_READ_CLEAR = 2, /* Write Adjacency entry */ MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY = 1, /* Write Adjacency entry only if the activity is cleared. * The write may not succeed if the activity is set. There is not * direct feedback if the write has succeeded or not, however * the get will reveal the actual entry (SW can compare the get * response to the set command). */ MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY_ON_ACTIVITY = 3, }; /* reg_ratr_op * Note that Write operation may also be used for updating * counter_set_type and counter_index. In this case all other * fields must not be updated. * Access: OP */ MLXSW_ITEM32(reg, ratr, op, 0x00, 28, 4); /* reg_ratr_v * Valid bit. Indicates if the adjacency entry is valid. * Note: the device may need some time before reusing an invalidated * entry. During this time the entry can not be reused. It is * recommended to use another entry before reusing an invalidated * entry (e.g. software can put it at the end of the list for * reusing). Trying to access an invalidated entry not yet cleared * by the device results with failure indicating "Try Again" status. * When valid is '0' then egress_router_interface,trap_action, * adjacency_parameters and counters are reserved * Access: RW */ MLXSW_ITEM32(reg, ratr, v, 0x00, 24, 1); /* reg_ratr_a * Activity. Set for new entries. Set if a packet lookup has hit on * the specific entry. To clear the a bit, use "clear activity". * Access: RO */ MLXSW_ITEM32(reg, ratr, a, 0x00, 16, 1); enum mlxsw_reg_ratr_type { /* Ethernet */ MLXSW_REG_RATR_TYPE_ETHERNET, /* IPoIB Unicast without GRH. * Reserved for Spectrum. */ MLXSW_REG_RATR_TYPE_IPOIB_UC, /* IPoIB Unicast with GRH. Supported only in table 0 (Ethernet unicast * adjacency). * Reserved for Spectrum. */ MLXSW_REG_RATR_TYPE_IPOIB_UC_W_GRH, /* IPoIB Multicast. * Reserved for Spectrum. */ MLXSW_REG_RATR_TYPE_IPOIB_MC, /* MPLS. * Reserved for SwitchX/-2. */ MLXSW_REG_RATR_TYPE_MPLS, /* IPinIP Encap. * Reserved for SwitchX/-2. */ MLXSW_REG_RATR_TYPE_IPIP, }; /* reg_ratr_type * Adjacency entry type. * Access: RW */ MLXSW_ITEM32(reg, ratr, type, 0x04, 28, 4); /* reg_ratr_adjacency_index_low * Bits 15:0 of index into the adjacency table. * For SwitchX and SwitchX-2, the adjacency table is linear and * used for adjacency entries only. * For Spectrum, the index is to the KVD linear. * Access: Index */ MLXSW_ITEM32(reg, ratr, adjacency_index_low, 0x04, 0, 16); /* reg_ratr_egress_router_interface * Range is 0 .. cap_max_router_interfaces - 1 * Access: RW */ MLXSW_ITEM32(reg, ratr, egress_router_interface, 0x08, 0, 16); enum mlxsw_reg_ratr_trap_action { MLXSW_REG_RATR_TRAP_ACTION_NOP, MLXSW_REG_RATR_TRAP_ACTION_TRAP, MLXSW_REG_RATR_TRAP_ACTION_MIRROR_TO_CPU, MLXSW_REG_RATR_TRAP_ACTION_MIRROR, MLXSW_REG_RATR_TRAP_ACTION_DISCARD_ERRORS, }; /* reg_ratr_trap_action * see mlxsw_reg_ratr_trap_action * Access: RW */ MLXSW_ITEM32(reg, ratr, trap_action, 0x0C, 28, 4); /* reg_ratr_adjacency_index_high * Bits 23:16 of the adjacency_index. * Access: Index */ MLXSW_ITEM32(reg, ratr, adjacency_index_high, 0x0C, 16, 8); enum mlxsw_reg_ratr_trap_id { MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS0, MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS1, }; /* reg_ratr_trap_id * Trap ID to be reported to CPU. * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. * For trap_action of NOP, MIRROR and DISCARD_ERROR * Access: RW */ MLXSW_ITEM32(reg, ratr, trap_id, 0x0C, 0, 8); /* reg_ratr_eth_destination_mac * MAC address of the destination next-hop. * Access: RW */ MLXSW_ITEM_BUF(reg, ratr, eth_destination_mac, 0x12, 6); enum mlxsw_reg_ratr_ipip_type { /* IPv4, address set by mlxsw_reg_ratr_ipip_ipv4_udip. */ MLXSW_REG_RATR_IPIP_TYPE_IPV4, /* IPv6, address set by mlxsw_reg_ratr_ipip_ipv6_ptr. */ MLXSW_REG_RATR_IPIP_TYPE_IPV6, }; /* reg_ratr_ipip_type * Underlay destination ip type. * Note: the type field must match the protocol of the router interface. * Access: RW */ MLXSW_ITEM32(reg, ratr, ipip_type, 0x10, 16, 4); /* reg_ratr_ipip_ipv4_udip * Underlay ipv4 dip. * Reserved when ipip_type is IPv6. * Access: RW */ MLXSW_ITEM32(reg, ratr, ipip_ipv4_udip, 0x18, 0, 32); /* reg_ratr_ipip_ipv6_ptr * Pointer to IPv6 underlay destination ip address. * For Spectrum: Pointer to KVD linear space. * Access: RW */ MLXSW_ITEM32(reg, ratr, ipip_ipv6_ptr, 0x1C, 0, 24); static inline void mlxsw_reg_ratr_pack(char *payload, enum mlxsw_reg_ratr_op op, bool valid, enum mlxsw_reg_ratr_type type, u32 adjacency_index, u16 egress_rif) { MLXSW_REG_ZERO(ratr, payload); mlxsw_reg_ratr_op_set(payload, op); mlxsw_reg_ratr_v_set(payload, valid); mlxsw_reg_ratr_type_set(payload, type); mlxsw_reg_ratr_adjacency_index_low_set(payload, adjacency_index); mlxsw_reg_ratr_adjacency_index_high_set(payload, adjacency_index >> 16); mlxsw_reg_ratr_egress_router_interface_set(payload, egress_rif); } static inline void mlxsw_reg_ratr_eth_entry_pack(char *payload, const char *dest_mac) { mlxsw_reg_ratr_eth_destination_mac_memcpy_to(payload, dest_mac); } static inline void mlxsw_reg_ratr_ipip4_entry_pack(char *payload, u32 ipv4_udip) { mlxsw_reg_ratr_ipip_type_set(payload, MLXSW_REG_RATR_IPIP_TYPE_IPV4); mlxsw_reg_ratr_ipip_ipv4_udip_set(payload, ipv4_udip); } /* RICNT - Router Interface Counter Register * ----------------------------------------- * The RICNT register retrieves per port performance counters */ #define MLXSW_REG_RICNT_ID 0x800B #define MLXSW_REG_RICNT_LEN 0x100 MLXSW_REG_DEFINE(ricnt, MLXSW_REG_RICNT_ID, MLXSW_REG_RICNT_LEN); /* reg_ricnt_counter_index * Counter index * Access: RW */ MLXSW_ITEM32(reg, ricnt, counter_index, 0x04, 0, 24); enum mlxsw_reg_ricnt_counter_set_type { /* No Count. */ MLXSW_REG_RICNT_COUNTER_SET_TYPE_NO_COUNT = 0x00, /* Basic. Used for router interfaces, counting the following: * - Error and Discard counters. * - Unicast, Multicast and Broadcast counters. Sharing the * same set of counters for the different type of traffic * (IPv4, IPv6 and mpls). */ MLXSW_REG_RICNT_COUNTER_SET_TYPE_BASIC = 0x09, }; /* reg_ricnt_counter_set_type * Counter Set Type for router interface counter * Access: RW */ MLXSW_ITEM32(reg, ricnt, counter_set_type, 0x04, 24, 8); enum mlxsw_reg_ricnt_opcode { /* Nop. Supported only for read access*/ MLXSW_REG_RICNT_OPCODE_NOP = 0x00, /* Clear. Setting the clr bit will reset the counter value for * all counters of the specified Router Interface. */ MLXSW_REG_RICNT_OPCODE_CLEAR = 0x08, }; /* reg_ricnt_opcode * Opcode * Access: RW */ MLXSW_ITEM32(reg, ricnt, op, 0x00, 28, 4); /* reg_ricnt_good_unicast_packets * good unicast packets. * Access: RW */ MLXSW_ITEM64(reg, ricnt, good_unicast_packets, 0x08, 0, 64); /* reg_ricnt_good_multicast_packets * good multicast packets. * Access: RW */ MLXSW_ITEM64(reg, ricnt, good_multicast_packets, 0x10, 0, 64); /* reg_ricnt_good_broadcast_packets * good broadcast packets * Access: RW */ MLXSW_ITEM64(reg, ricnt, good_broadcast_packets, 0x18, 0, 64); /* reg_ricnt_good_unicast_bytes * A count of L3 data and padding octets not including L2 headers * for good unicast frames. * Access: RW */ MLXSW_ITEM64(reg, ricnt, good_unicast_bytes, 0x20, 0, 64); /* reg_ricnt_good_multicast_bytes * A count of L3 data and padding octets not including L2 headers * for good multicast frames. * Access: RW */ MLXSW_ITEM64(reg, ricnt, good_multicast_bytes, 0x28, 0, 64); /* reg_ritr_good_broadcast_bytes * A count of L3 data and padding octets not including L2 headers * for good broadcast frames. * Access: RW */ MLXSW_ITEM64(reg, ricnt, good_broadcast_bytes, 0x30, 0, 64); /* reg_ricnt_error_packets * A count of errored frames that do not pass the router checks. * Access: RW */ MLXSW_ITEM64(reg, ricnt, error_packets, 0x38, 0, 64); /* reg_ricnt_discrad_packets * A count of non-errored frames that do not pass the router checks. * Access: RW */ MLXSW_ITEM64(reg, ricnt, discard_packets, 0x40, 0, 64); /* reg_ricnt_error_bytes * A count of L3 data and padding octets not including L2 headers * for errored frames. * Access: RW */ MLXSW_ITEM64(reg, ricnt, error_bytes, 0x48, 0, 64); /* reg_ricnt_discard_bytes * A count of L3 data and padding octets not including L2 headers * for non-errored frames that do not pass the router checks. * Access: RW */ MLXSW_ITEM64(reg, ricnt, discard_bytes, 0x50, 0, 64); static inline void mlxsw_reg_ricnt_pack(char *payload, u32 index, enum mlxsw_reg_ricnt_opcode op) { MLXSW_REG_ZERO(ricnt, payload); mlxsw_reg_ricnt_op_set(payload, op); mlxsw_reg_ricnt_counter_index_set(payload, index); mlxsw_reg_ricnt_counter_set_type_set(payload, MLXSW_REG_RICNT_COUNTER_SET_TYPE_BASIC); } /* RALTA - Router Algorithmic LPM Tree Allocation Register * ------------------------------------------------------- * RALTA is used to allocate the LPM trees of the SHSPM method. */ #define MLXSW_REG_RALTA_ID 0x8010 #define MLXSW_REG_RALTA_LEN 0x04 MLXSW_REG_DEFINE(ralta, MLXSW_REG_RALTA_ID, MLXSW_REG_RALTA_LEN); /* reg_ralta_op * opcode (valid for Write, must be 0 on Read) * 0 - allocate a tree * 1 - deallocate a tree * Access: OP */ MLXSW_ITEM32(reg, ralta, op, 0x00, 28, 2); enum mlxsw_reg_ralxx_protocol { MLXSW_REG_RALXX_PROTOCOL_IPV4, MLXSW_REG_RALXX_PROTOCOL_IPV6, }; /* reg_ralta_protocol * Protocol. * Deallocation opcode: Reserved. * Access: RW */ MLXSW_ITEM32(reg, ralta, protocol, 0x00, 24, 4); /* reg_ralta_tree_id * An identifier (numbered from 1..cap_shspm_max_trees-1) representing * the tree identifier (managed by software). * Note that tree_id 0 is allocated for a default-route tree. * Access: Index */ MLXSW_ITEM32(reg, ralta, tree_id, 0x00, 0, 8); static inline void mlxsw_reg_ralta_pack(char *payload, bool alloc, enum mlxsw_reg_ralxx_protocol protocol, u8 tree_id) { MLXSW_REG_ZERO(ralta, payload); mlxsw_reg_ralta_op_set(payload, !alloc); mlxsw_reg_ralta_protocol_set(payload, protocol); mlxsw_reg_ralta_tree_id_set(payload, tree_id); } /* RALST - Router Algorithmic LPM Structure Tree Register * ------------------------------------------------------ * RALST is used to set and query the structure of an LPM tree. * The structure of the tree must be sorted as a sorted binary tree, while * each node is a bin that is tagged as the length of the prefixes the lookup * will refer to. Therefore, bin X refers to a set of entries with prefixes * of X bits to match with the destination address. The bin 0 indicates * the default action, when there is no match of any prefix. */ #define MLXSW_REG_RALST_ID 0x8011 #define MLXSW_REG_RALST_LEN 0x104 MLXSW_REG_DEFINE(ralst, MLXSW_REG_RALST_ID, MLXSW_REG_RALST_LEN); /* reg_ralst_root_bin * The bin number of the root bin. * 064 the entry consumes * two entries in the physical HW table. * Access: Index */ MLXSW_ITEM32(reg, ralue, prefix_len, 0x08, 0, 8); /* reg_ralue_dip* * The prefix of the route or of the marker that the object of the LPM * is compared with. The most significant bits of the dip are the prefix. * The least significant bits must be '0' if the prefix_len is smaller * than 128 for IPv6 or smaller than 32 for IPv4. * IPv4 address uses bits dip[31:0] and bits dip[127:32] are reserved. * Access: Index */ MLXSW_ITEM32(reg, ralue, dip4, 0x18, 0, 32); MLXSW_ITEM_BUF(reg, ralue, dip6, 0x0C, 16); enum mlxsw_reg_ralue_entry_type { MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_ENTRY = 1, MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY = 2, MLXSW_REG_RALUE_ENTRY_TYPE_MARKER_AND_ROUTE_ENTRY = 3, }; /* reg_ralue_entry_type * Entry type. * Note - for Marker entries, the action_type and action fields are reserved. * Access: RW */ MLXSW_ITEM32(reg, ralue, entry_type, 0x1C, 30, 2); /* reg_ralue_bmp_len * The best match prefix length in the case that there is no match for * longer prefixes. * If (entry_type != MARKER_ENTRY), bmp_len must be equal to prefix_len * Note for any update operation with entry_type modification this * field must be set. * Access: RW */ MLXSW_ITEM32(reg, ralue, bmp_len, 0x1C, 16, 8); enum mlxsw_reg_ralue_action_type { MLXSW_REG_RALUE_ACTION_TYPE_REMOTE, MLXSW_REG_RALUE_ACTION_TYPE_LOCAL, MLXSW_REG_RALUE_ACTION_TYPE_IP2ME, }; /* reg_ralue_action_type * Action Type * Indicates how the IP address is connected. * It can be connected to a local subnet through local_erif or can be * on a remote subnet connected through a next-hop router, * or transmitted to the CPU. * Reserved when entry_type = MARKER_ENTRY * Access: RW */ MLXSW_ITEM32(reg, ralue, action_type, 0x1C, 0, 2); enum mlxsw_reg_ralue_trap_action { MLXSW_REG_RALUE_TRAP_ACTION_NOP, MLXSW_REG_RALUE_TRAP_ACTION_TRAP, MLXSW_REG_RALUE_TRAP_ACTION_MIRROR_TO_CPU, MLXSW_REG_RALUE_TRAP_ACTION_MIRROR, MLXSW_REG_RALUE_TRAP_ACTION_DISCARD_ERROR, }; /* reg_ralue_trap_action * Trap action. * For IP2ME action, only NOP and MIRROR are possible. * Access: RW */ MLXSW_ITEM32(reg, ralue, trap_action, 0x20, 28, 4); /* reg_ralue_trap_id * Trap ID to be reported to CPU. * Trap ID is RTR_INGRESS0 or RTR_INGRESS1. * For trap_action of NOP, MIRROR and DISCARD_ERROR, trap_id is reserved. * Access: RW */ MLXSW_ITEM32(reg, ralue, trap_id, 0x20, 0, 9); /* reg_ralue_adjacency_index * Points to the first entry of the group-based ECMP. * Only relevant in case of REMOTE action. * Access: RW */ MLXSW_ITEM32(reg, ralue, adjacency_index, 0x24, 0, 24); /* reg_ralue_ecmp_size * Amount of sequential entries starting * from the adjacency_index (the number of ECMPs). * The valid range is 1-64, 512, 1024, 2048 and 4096. * Reserved when trap_action is TRAP or DISCARD_ERROR. * Only relevant in case of REMOTE action. * Access: RW */ MLXSW_ITEM32(reg, ralue, ecmp_size, 0x28, 0, 13); /* reg_ralue_local_erif * Egress Router Interface. * Only relevant in case of LOCAL action. * Access: RW */ MLXSW_ITEM32(reg, ralue, local_erif, 0x24, 0, 16); /* reg_ralue_ip2me_v * Valid bit for the tunnel_ptr field. * If valid = 0 then trap to CPU as IP2ME trap ID. * If valid = 1 and the packet format allows NVE or IPinIP tunnel * decapsulation then tunnel decapsulation is done. * If valid = 1 and packet format does not allow NVE or IPinIP tunnel * decapsulation then trap as IP2ME trap ID. * Only relevant in case of IP2ME action. * Access: RW */ MLXSW_ITEM32(reg, ralue, ip2me_v, 0x24, 31, 1); /* reg_ralue_ip2me_tunnel_ptr * Tunnel Pointer for NVE or IPinIP tunnel decapsulation. * For Spectrum, pointer to KVD Linear. * Only relevant in case of IP2ME action. * Access: RW */ MLXSW_ITEM32(reg, ralue, ip2me_tunnel_ptr, 0x24, 0, 24); static inline void mlxsw_reg_ralue_pack(char *payload, enum mlxsw_reg_ralxx_protocol protocol, enum mlxsw_reg_ralue_op op, u16 virtual_router, u8 prefix_len) { MLXSW_REG_ZERO(ralue, payload); mlxsw_reg_ralue_protocol_set(payload, protocol); mlxsw_reg_ralue_op_set(payload, op); mlxsw_reg_ralue_virtual_router_set(payload, virtual_router); mlxsw_reg_ralue_prefix_len_set(payload, prefix_len); mlxsw_reg_ralue_entry_type_set(payload, MLXSW_REG_RALUE_ENTRY_TYPE_ROUTE_ENTRY); mlxsw_reg_ralue_bmp_len_set(payload, prefix_len); } static inline void mlxsw_reg_ralue_pack4(char *payload, enum mlxsw_reg_ralxx_protocol protocol, enum mlxsw_reg_ralue_op op, u16 virtual_router, u8 prefix_len, u32 dip) { mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len); mlxsw_reg_ralue_dip4_set(payload, dip); } static inline void mlxsw_reg_ralue_pack6(char *payload, enum mlxsw_reg_ralxx_protocol protocol, enum mlxsw_reg_ralue_op op, u16 virtual_router, u8 prefix_len, const void *dip) { mlxsw_reg_ralue_pack(payload, protocol, op, virtual_router, prefix_len); mlxsw_reg_ralue_dip6_memcpy_to(payload, dip); } static inline void mlxsw_reg_ralue_act_remote_pack(char *payload, enum mlxsw_reg_ralue_trap_action trap_action, u16 trap_id, u32 adjacency_index, u16 ecmp_size) { mlxsw_reg_ralue_action_type_set(payload, MLXSW_REG_RALUE_ACTION_TYPE_REMOTE); mlxsw_reg_ralue_trap_action_set(payload, trap_action); mlxsw_reg_ralue_trap_id_set(payload, trap_id); mlxsw_reg_ralue_adjacency_index_set(payload, adjacency_index); mlxsw_reg_ralue_ecmp_size_set(payload, ecmp_size); } static inline void mlxsw_reg_ralue_act_local_pack(char *payload, enum mlxsw_reg_ralue_trap_action trap_action, u16 trap_id, u16 local_erif) { mlxsw_reg_ralue_action_type_set(payload, MLXSW_REG_RALUE_ACTION_TYPE_LOCAL); mlxsw_reg_ralue_trap_action_set(payload, trap_action); mlxsw_reg_ralue_trap_id_set(payload, trap_id); mlxsw_reg_ralue_local_erif_set(payload, local_erif); } static inline void mlxsw_reg_ralue_act_ip2me_pack(char *payload) { mlxsw_reg_ralue_action_type_set(payload, MLXSW_REG_RALUE_ACTION_TYPE_IP2ME); } static inline void mlxsw_reg_ralue_act_ip2me_tun_pack(char *payload, u32 tunnel_ptr) { mlxsw_reg_ralue_action_type_set(payload, MLXSW_REG_RALUE_ACTION_TYPE_IP2ME); mlxsw_reg_ralue_ip2me_v_set(payload, 1); mlxsw_reg_ralue_ip2me_tunnel_ptr_set(payload, tunnel_ptr); } /* RAUHT - Router Algorithmic LPM Unicast Host Table Register * ---------------------------------------------------------- * The RAUHT register is used to configure and query the Unicast Host table in * devices that implement the Algorithmic LPM. */ #define MLXSW_REG_RAUHT_ID 0x8014 #define MLXSW_REG_RAUHT_LEN 0x74 MLXSW_REG_DEFINE(rauht, MLXSW_REG_RAUHT_ID, MLXSW_REG_RAUHT_LEN); enum mlxsw_reg_rauht_type { MLXSW_REG_RAUHT_TYPE_IPV4, MLXSW_REG_RAUHT_TYPE_IPV6, }; /* reg_rauht_type * Access: Index */ MLXSW_ITEM32(reg, rauht, type, 0x00, 24, 2); enum mlxsw_reg_rauht_op { MLXSW_REG_RAUHT_OP_QUERY_READ = 0, /* Read operation */ MLXSW_REG_RAUHT_OP_QUERY_CLEAR_ON_READ = 1, /* Clear on read operation. Used to read entry and clear * activity bit. */ MLXSW_REG_RAUHT_OP_WRITE_ADD = 0, /* Add. Used to write a new entry to the table. All R/W fields are * relevant for new entry. Activity bit is set for new entries. */ MLXSW_REG_RAUHT_OP_WRITE_UPDATE = 1, /* Update action. Used to update an existing route entry and * only update the following fields: * trap_action, trap_id, mac, counter_set_type, counter_index */ MLXSW_REG_RAUHT_OP_WRITE_CLEAR_ACTIVITY = 2, /* Clear activity. A bit is cleared for the entry. */ MLXSW_REG_RAUHT_OP_WRITE_DELETE = 3, /* Delete entry */ MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL = 4, /* Delete all host entries on a RIF. In this command, dip * field is reserved. */ }; /* reg_rauht_op * Access: OP */ MLXSW_ITEM32(reg, rauht, op, 0x00, 20, 3); /* reg_rauht_a * Activity. Set for new entries. Set if a packet lookup has hit on * the specific entry. * To clear the a bit, use "clear activity" op. * Enabled by activity_dis in RGCR * Access: RO */ MLXSW_ITEM32(reg, rauht, a, 0x00, 16, 1); /* reg_rauht_rif * Router Interface * Access: Index */ MLXSW_ITEM32(reg, rauht, rif, 0x00, 0, 16); /* reg_rauht_dip* * Destination address. * Access: Index */ MLXSW_ITEM32(reg, rauht, dip4, 0x1C, 0x0, 32); MLXSW_ITEM_BUF(reg, rauht, dip6, 0x10, 16); enum mlxsw_reg_rauht_trap_action { MLXSW_REG_RAUHT_TRAP_ACTION_NOP, MLXSW_REG_RAUHT_TRAP_ACTION_TRAP, MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR_TO_CPU, MLXSW_REG_RAUHT_TRAP_ACTION_MIRROR, MLXSW_REG_RAUHT_TRAP_ACTION_DISCARD_ERRORS, }; /* reg_rauht_trap_action * Access: RW */ MLXSW_ITEM32(reg, rauht, trap_action, 0x60, 28, 4); enum mlxsw_reg_rauht_trap_id { MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS0, MLXSW_REG_RAUHT_TRAP_ID_RTR_EGRESS1, }; /* reg_rauht_trap_id * Trap ID to be reported to CPU. * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. * For trap_action of NOP, MIRROR and DISCARD_ERROR, * trap_id is reserved. * Access: RW */ MLXSW_ITEM32(reg, rauht, trap_id, 0x60, 0, 9); enum mlxsw_reg_flow_counter_set_type { /* No count */ MLXSW_REG_FLOW_COUNTER_SET_TYPE_NO_COUNT = 0x00, /* Count packets and bytes */ MLXSW_REG_FLOW_COUNTER_SET_TYPE_PACKETS_BYTES = 0x03, /* Count only packets */ MLXSW_REG_FLOW_COUNTER_SET_TYPE_PACKETS = 0x05, }; /* reg_rauht_counter_set_type * Counter set type for flow counters * Access: RW */ MLXSW_ITEM32(reg, rauht, counter_set_type, 0x68, 24, 8); /* reg_rauht_counter_index * Counter index for flow counters * Access: RW */ MLXSW_ITEM32(reg, rauht, counter_index, 0x68, 0, 24); /* reg_rauht_mac * MAC address. * Access: RW */ MLXSW_ITEM_BUF(reg, rauht, mac, 0x6E, 6); static inline void mlxsw_reg_rauht_pack(char *payload, enum mlxsw_reg_rauht_op op, u16 rif, const char *mac) { MLXSW_REG_ZERO(rauht, payload); mlxsw_reg_rauht_op_set(payload, op); mlxsw_reg_rauht_rif_set(payload, rif); mlxsw_reg_rauht_mac_memcpy_to(payload, mac); } static inline void mlxsw_reg_rauht_pack4(char *payload, enum mlxsw_reg_rauht_op op, u16 rif, const char *mac, u32 dip) { mlxsw_reg_rauht_pack(payload, op, rif, mac); mlxsw_reg_rauht_dip4_set(payload, dip); } static inline void mlxsw_reg_rauht_pack6(char *payload, enum mlxsw_reg_rauht_op op, u16 rif, const char *mac, const char *dip) { mlxsw_reg_rauht_pack(payload, op, rif, mac); mlxsw_reg_rauht_type_set(payload, MLXSW_REG_RAUHT_TYPE_IPV6); mlxsw_reg_rauht_dip6_memcpy_to(payload, dip); } static inline void mlxsw_reg_rauht_pack_counter(char *payload, u64 counter_index) { mlxsw_reg_rauht_counter_index_set(payload, counter_index); mlxsw_reg_rauht_counter_set_type_set(payload, MLXSW_REG_FLOW_COUNTER_SET_TYPE_PACKETS_BYTES); } /* RALEU - Router Algorithmic LPM ECMP Update Register * --------------------------------------------------- * The register enables updating the ECMP section in the action for multiple * LPM Unicast entries in a single operation. The update is executed to * all entries of a {virtual router, protocol} tuple using the same ECMP group. */ #define MLXSW_REG_RALEU_ID 0x8015 #define MLXSW_REG_RALEU_LEN 0x28 MLXSW_REG_DEFINE(raleu, MLXSW_REG_RALEU_ID, MLXSW_REG_RALEU_LEN); /* reg_raleu_protocol * Protocol. * Access: Index */ MLXSW_ITEM32(reg, raleu, protocol, 0x00, 24, 4); /* reg_raleu_virtual_router * Virtual Router ID * Range is 0..cap_max_virtual_routers-1 * Access: Index */ MLXSW_ITEM32(reg, raleu, virtual_router, 0x00, 0, 16); /* reg_raleu_adjacency_index * Adjacency Index used for matching on the existing entries. * Access: Index */ MLXSW_ITEM32(reg, raleu, adjacency_index, 0x10, 0, 24); /* reg_raleu_ecmp_size * ECMP Size used for matching on the existing entries. * Access: Index */ MLXSW_ITEM32(reg, raleu, ecmp_size, 0x14, 0, 13); /* reg_raleu_new_adjacency_index * New Adjacency Index. * Access: WO */ MLXSW_ITEM32(reg, raleu, new_adjacency_index, 0x20, 0, 24); /* reg_raleu_new_ecmp_size * New ECMP Size. * Access: WO */ MLXSW_ITEM32(reg, raleu, new_ecmp_size, 0x24, 0, 13); static inline void mlxsw_reg_raleu_pack(char *payload, enum mlxsw_reg_ralxx_protocol protocol, u16 virtual_router, u32 adjacency_index, u16 ecmp_size, u32 new_adjacency_index, u16 new_ecmp_size) { MLXSW_REG_ZERO(raleu, payload); mlxsw_reg_raleu_protocol_set(payload, protocol); mlxsw_reg_raleu_virtual_router_set(payload, virtual_router); mlxsw_reg_raleu_adjacency_index_set(payload, adjacency_index); mlxsw_reg_raleu_ecmp_size_set(payload, ecmp_size); mlxsw_reg_raleu_new_adjacency_index_set(payload, new_adjacency_index); mlxsw_reg_raleu_new_ecmp_size_set(payload, new_ecmp_size); } /* RAUHTD - Router Algorithmic LPM Unicast Host Table Dump Register * ---------------------------------------------------------------- * The RAUHTD register allows dumping entries from the Router Unicast Host * Table. For a given session an entry is dumped no more than one time. The * first RAUHTD access after reset is a new session. A session ends when the * num_rec response is smaller than num_rec request or for IPv4 when the * num_entries is smaller than 4. The clear activity affect the current session * or the last session if a new session has not started. */ #define MLXSW_REG_RAUHTD_ID 0x8018 #define MLXSW_REG_RAUHTD_BASE_LEN 0x20 #define MLXSW_REG_RAUHTD_REC_LEN 0x20 #define MLXSW_REG_RAUHTD_REC_MAX_NUM 32 #define MLXSW_REG_RAUHTD_LEN (MLXSW_REG_RAUHTD_BASE_LEN + \ MLXSW_REG_RAUHTD_REC_MAX_NUM * MLXSW_REG_RAUHTD_REC_LEN) #define MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC 4 MLXSW_REG_DEFINE(rauhtd, MLXSW_REG_RAUHTD_ID, MLXSW_REG_RAUHTD_LEN); #define MLXSW_REG_RAUHTD_FILTER_A BIT(0) #define MLXSW_REG_RAUHTD_FILTER_RIF BIT(3) /* reg_rauhtd_filter_fields * if a bit is '0' then the relevant field is ignored and dump is done * regardless of the field value * Bit0 - filter by activity: entry_a * Bit3 - filter by entry rip: entry_rif * Access: Index */ MLXSW_ITEM32(reg, rauhtd, filter_fields, 0x00, 0, 8); enum mlxsw_reg_rauhtd_op { MLXSW_REG_RAUHTD_OP_DUMP, MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR, }; /* reg_rauhtd_op * Access: OP */ MLXSW_ITEM32(reg, rauhtd, op, 0x04, 24, 2); /* reg_rauhtd_num_rec * At request: number of records requested * At response: number of records dumped * For IPv4, each record has 4 entries at request and up to 4 entries * at response * Range is 0..MLXSW_REG_RAUHTD_REC_MAX_NUM * Access: Index */ MLXSW_ITEM32(reg, rauhtd, num_rec, 0x04, 0, 8); /* reg_rauhtd_entry_a * Dump only if activity has value of entry_a * Reserved if filter_fields bit0 is '0' * Access: Index */ MLXSW_ITEM32(reg, rauhtd, entry_a, 0x08, 16, 1); enum mlxsw_reg_rauhtd_type { MLXSW_REG_RAUHTD_TYPE_IPV4, MLXSW_REG_RAUHTD_TYPE_IPV6, }; /* reg_rauhtd_type * Dump only if record type is: * 0 - IPv4 * 1 - IPv6 * Access: Index */ MLXSW_ITEM32(reg, rauhtd, type, 0x08, 0, 4); /* reg_rauhtd_entry_rif * Dump only if RIF has value of entry_rif * Reserved if filter_fields bit3 is '0' * Access: Index */ MLXSW_ITEM32(reg, rauhtd, entry_rif, 0x0C, 0, 16); static inline void mlxsw_reg_rauhtd_pack(char *payload, enum mlxsw_reg_rauhtd_type type) { MLXSW_REG_ZERO(rauhtd, payload); mlxsw_reg_rauhtd_filter_fields_set(payload, MLXSW_REG_RAUHTD_FILTER_A); mlxsw_reg_rauhtd_op_set(payload, MLXSW_REG_RAUHTD_OP_DUMP_AND_CLEAR); mlxsw_reg_rauhtd_num_rec_set(payload, MLXSW_REG_RAUHTD_REC_MAX_NUM); mlxsw_reg_rauhtd_entry_a_set(payload, 1); mlxsw_reg_rauhtd_type_set(payload, type); } /* reg_rauhtd_ipv4_rec_num_entries * Number of valid entries in this record: * 0 - 1 valid entry * 1 - 2 valid entries * 2 - 3 valid entries * 3 - 4 valid entries * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_rec_num_entries, MLXSW_REG_RAUHTD_BASE_LEN, 28, 2, MLXSW_REG_RAUHTD_REC_LEN, 0x00, false); /* reg_rauhtd_rec_type * Record type. * 0 - IPv4 * 1 - IPv6 * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, rec_type, MLXSW_REG_RAUHTD_BASE_LEN, 24, 2, MLXSW_REG_RAUHTD_REC_LEN, 0x00, false); #define MLXSW_REG_RAUHTD_IPV4_ENT_LEN 0x8 /* reg_rauhtd_ipv4_ent_a * Activity. Set for new entries. Set if a packet lookup has hit on the * specific entry. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_a, MLXSW_REG_RAUHTD_BASE_LEN, 16, 1, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false); /* reg_rauhtd_ipv4_ent_rif * Router interface. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_rif, MLXSW_REG_RAUHTD_BASE_LEN, 0, 16, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x00, false); /* reg_rauhtd_ipv4_ent_dip * Destination IPv4 address. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv4_ent_dip, MLXSW_REG_RAUHTD_BASE_LEN, 0, 32, MLXSW_REG_RAUHTD_IPV4_ENT_LEN, 0x04, false); #define MLXSW_REG_RAUHTD_IPV6_ENT_LEN 0x20 /* reg_rauhtd_ipv6_ent_a * Activity. Set for new entries. Set if a packet lookup has hit on the * specific entry. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv6_ent_a, MLXSW_REG_RAUHTD_BASE_LEN, 16, 1, MLXSW_REG_RAUHTD_IPV6_ENT_LEN, 0x00, false); /* reg_rauhtd_ipv6_ent_rif * Router interface. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, rauhtd, ipv6_ent_rif, MLXSW_REG_RAUHTD_BASE_LEN, 0, 16, MLXSW_REG_RAUHTD_IPV6_ENT_LEN, 0x00, false); /* reg_rauhtd_ipv6_ent_dip * Destination IPv6 address. * Access: RO */ MLXSW_ITEM_BUF_INDEXED(reg, rauhtd, ipv6_ent_dip, MLXSW_REG_RAUHTD_BASE_LEN, 16, MLXSW_REG_RAUHTD_IPV6_ENT_LEN, 0x10); static inline void mlxsw_reg_rauhtd_ent_ipv4_unpack(char *payload, int ent_index, u16 *p_rif, u32 *p_dip) { *p_rif = mlxsw_reg_rauhtd_ipv4_ent_rif_get(payload, ent_index); *p_dip = mlxsw_reg_rauhtd_ipv4_ent_dip_get(payload, ent_index); } static inline void mlxsw_reg_rauhtd_ent_ipv6_unpack(char *payload, int rec_index, u16 *p_rif, char *p_dip) { *p_rif = mlxsw_reg_rauhtd_ipv6_ent_rif_get(payload, rec_index); mlxsw_reg_rauhtd_ipv6_ent_dip_memcpy_from(payload, rec_index, p_dip); } /* RTDP - Routing Tunnel Decap Properties Register * ----------------------------------------------- * The RTDP register is used for configuring the tunnel decap properties of NVE * and IPinIP. */ #define MLXSW_REG_RTDP_ID 0x8020 #define MLXSW_REG_RTDP_LEN 0x44 MLXSW_REG_DEFINE(rtdp, MLXSW_REG_RTDP_ID, MLXSW_REG_RTDP_LEN); enum mlxsw_reg_rtdp_type { MLXSW_REG_RTDP_TYPE_NVE, MLXSW_REG_RTDP_TYPE_IPIP, }; /* reg_rtdp_type * Type of the RTDP entry as per enum mlxsw_reg_rtdp_type. * Access: RW */ MLXSW_ITEM32(reg, rtdp, type, 0x00, 28, 4); /* reg_rtdp_tunnel_index * Index to the Decap entry. * For Spectrum, Index to KVD Linear. * Access: Index */ MLXSW_ITEM32(reg, rtdp, tunnel_index, 0x00, 0, 24); /* IPinIP */ /* reg_rtdp_ipip_irif * Ingress Router Interface for the overlay router * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_irif, 0x04, 16, 16); enum mlxsw_reg_rtdp_ipip_sip_check { /* No sip checks. */ MLXSW_REG_RTDP_IPIP_SIP_CHECK_NO, /* Filter packet if underlay is not IPv4 or if underlay SIP does not * equal ipv4_usip. */ MLXSW_REG_RTDP_IPIP_SIP_CHECK_FILTER_IPV4, /* Filter packet if underlay is not IPv6 or if underlay SIP does not * equal ipv6_usip. */ MLXSW_REG_RTDP_IPIP_SIP_CHECK_FILTER_IPV6 = 3, }; /* reg_rtdp_ipip_sip_check * SIP check to perform. If decapsulation failed due to these configurations * then trap_id is IPIP_DECAP_ERROR. * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_sip_check, 0x04, 0, 3); /* If set, allow decapsulation of IPinIP (without GRE). */ #define MLXSW_REG_RTDP_IPIP_TYPE_CHECK_ALLOW_IPIP BIT(0) /* If set, allow decapsulation of IPinGREinIP without a key. */ #define MLXSW_REG_RTDP_IPIP_TYPE_CHECK_ALLOW_GRE BIT(1) /* If set, allow decapsulation of IPinGREinIP with a key. */ #define MLXSW_REG_RTDP_IPIP_TYPE_CHECK_ALLOW_GRE_KEY BIT(2) /* reg_rtdp_ipip_type_check * Flags as per MLXSW_REG_RTDP_IPIP_TYPE_CHECK_*. If decapsulation failed due to * these configurations then trap_id is IPIP_DECAP_ERROR. * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_type_check, 0x08, 24, 3); /* reg_rtdp_ipip_gre_key_check * Whether GRE key should be checked. When check is enabled: * - A packet received as IPinIP (without GRE) will always pass. * - A packet received as IPinGREinIP without a key will not pass the check. * - A packet received as IPinGREinIP with a key will pass the check only if the * key in the packet is equal to expected_gre_key. * If decapsulation failed due to GRE key then trap_id is IPIP_DECAP_ERROR. * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_gre_key_check, 0x08, 23, 1); /* reg_rtdp_ipip_ipv4_usip * Underlay IPv4 address for ipv4 source address check. * Reserved when sip_check is not '1'. * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_ipv4_usip, 0x0C, 0, 32); /* reg_rtdp_ipip_ipv6_usip_ptr * This field is valid when sip_check is "sipv6 check explicitly". This is a * pointer to the IPv6 DIP which is configured by RIPS. For Spectrum, the index * is to the KVD linear. * Reserved when sip_check is not MLXSW_REG_RTDP_IPIP_SIP_CHECK_FILTER_IPV6. * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_ipv6_usip_ptr, 0x10, 0, 24); /* reg_rtdp_ipip_expected_gre_key * GRE key for checking. * Reserved when gre_key_check is '0'. * Access: RW */ MLXSW_ITEM32(reg, rtdp, ipip_expected_gre_key, 0x14, 0, 32); static inline void mlxsw_reg_rtdp_pack(char *payload, enum mlxsw_reg_rtdp_type type, u32 tunnel_index) { MLXSW_REG_ZERO(rtdp, payload); mlxsw_reg_rtdp_type_set(payload, type); mlxsw_reg_rtdp_tunnel_index_set(payload, tunnel_index); } static inline void mlxsw_reg_rtdp_ipip4_pack(char *payload, u16 irif, enum mlxsw_reg_rtdp_ipip_sip_check sip_check, unsigned int type_check, bool gre_key_check, u32 ipv4_usip, u32 expected_gre_key) { mlxsw_reg_rtdp_ipip_irif_set(payload, irif); mlxsw_reg_rtdp_ipip_sip_check_set(payload, sip_check); mlxsw_reg_rtdp_ipip_type_check_set(payload, type_check); mlxsw_reg_rtdp_ipip_gre_key_check_set(payload, gre_key_check); mlxsw_reg_rtdp_ipip_ipv4_usip_set(payload, ipv4_usip); mlxsw_reg_rtdp_ipip_expected_gre_key_set(payload, expected_gre_key); } /* MFCR - Management Fan Control Register * -------------------------------------- * This register controls the settings of the Fan Speed PWM mechanism. */ #define MLXSW_REG_MFCR_ID 0x9001 #define MLXSW_REG_MFCR_LEN 0x08 MLXSW_REG_DEFINE(mfcr, MLXSW_REG_MFCR_ID, MLXSW_REG_MFCR_LEN); enum mlxsw_reg_mfcr_pwm_frequency { MLXSW_REG_MFCR_PWM_FEQ_11HZ = 0x00, MLXSW_REG_MFCR_PWM_FEQ_14_7HZ = 0x01, MLXSW_REG_MFCR_PWM_FEQ_22_1HZ = 0x02, MLXSW_REG_MFCR_PWM_FEQ_1_4KHZ = 0x40, MLXSW_REG_MFCR_PWM_FEQ_5KHZ = 0x41, MLXSW_REG_MFCR_PWM_FEQ_20KHZ = 0x42, MLXSW_REG_MFCR_PWM_FEQ_22_5KHZ = 0x43, MLXSW_REG_MFCR_PWM_FEQ_25KHZ = 0x44, }; /* reg_mfcr_pwm_frequency * Controls the frequency of the PWM signal. * Access: RW */ MLXSW_ITEM32(reg, mfcr, pwm_frequency, 0x00, 0, 7); #define MLXSW_MFCR_TACHOS_MAX 10 /* reg_mfcr_tacho_active * Indicates which of the tachometer is active (bit per tachometer). * Access: RO */ MLXSW_ITEM32(reg, mfcr, tacho_active, 0x04, 16, MLXSW_MFCR_TACHOS_MAX); #define MLXSW_MFCR_PWMS_MAX 5 /* reg_mfcr_pwm_active * Indicates which of the PWM control is active (bit per PWM). * Access: RO */ MLXSW_ITEM32(reg, mfcr, pwm_active, 0x04, 0, MLXSW_MFCR_PWMS_MAX); static inline void mlxsw_reg_mfcr_pack(char *payload, enum mlxsw_reg_mfcr_pwm_frequency pwm_frequency) { MLXSW_REG_ZERO(mfcr, payload); mlxsw_reg_mfcr_pwm_frequency_set(payload, pwm_frequency); } static inline void mlxsw_reg_mfcr_unpack(char *payload, enum mlxsw_reg_mfcr_pwm_frequency *p_pwm_frequency, u16 *p_tacho_active, u8 *p_pwm_active) { *p_pwm_frequency = mlxsw_reg_mfcr_pwm_frequency_get(payload); *p_tacho_active = mlxsw_reg_mfcr_tacho_active_get(payload); *p_pwm_active = mlxsw_reg_mfcr_pwm_active_get(payload); } /* MFSC - Management Fan Speed Control Register * -------------------------------------------- * This register controls the settings of the Fan Speed PWM mechanism. */ #define MLXSW_REG_MFSC_ID 0x9002 #define MLXSW_REG_MFSC_LEN 0x08 MLXSW_REG_DEFINE(mfsc, MLXSW_REG_MFSC_ID, MLXSW_REG_MFSC_LEN); /* reg_mfsc_pwm * Fan pwm to control / monitor. * Access: Index */ MLXSW_ITEM32(reg, mfsc, pwm, 0x00, 24, 3); /* reg_mfsc_pwm_duty_cycle * Controls the duty cycle of the PWM. Value range from 0..255 to * represent duty cycle of 0%...100%. * Access: RW */ MLXSW_ITEM32(reg, mfsc, pwm_duty_cycle, 0x04, 0, 8); static inline void mlxsw_reg_mfsc_pack(char *payload, u8 pwm, u8 pwm_duty_cycle) { MLXSW_REG_ZERO(mfsc, payload); mlxsw_reg_mfsc_pwm_set(payload, pwm); mlxsw_reg_mfsc_pwm_duty_cycle_set(payload, pwm_duty_cycle); } /* MFSM - Management Fan Speed Measurement * --------------------------------------- * This register controls the settings of the Tacho measurements and * enables reading the Tachometer measurements. */ #define MLXSW_REG_MFSM_ID 0x9003 #define MLXSW_REG_MFSM_LEN 0x08 MLXSW_REG_DEFINE(mfsm, MLXSW_REG_MFSM_ID, MLXSW_REG_MFSM_LEN); /* reg_mfsm_tacho * Fan tachometer index. * Access: Index */ MLXSW_ITEM32(reg, mfsm, tacho, 0x00, 24, 4); /* reg_mfsm_rpm * Fan speed (round per minute). * Access: RO */ MLXSW_ITEM32(reg, mfsm, rpm, 0x04, 0, 16); static inline void mlxsw_reg_mfsm_pack(char *payload, u8 tacho) { MLXSW_REG_ZERO(mfsm, payload); mlxsw_reg_mfsm_tacho_set(payload, tacho); } /* MFSL - Management Fan Speed Limit Register * ------------------------------------------ * The Fan Speed Limit register is used to configure the fan speed * event / interrupt notification mechanism. Fan speed threshold are * defined for both under-speed and over-speed. */ #define MLXSW_REG_MFSL_ID 0x9004 #define MLXSW_REG_MFSL_LEN 0x0C MLXSW_REG_DEFINE(mfsl, MLXSW_REG_MFSL_ID, MLXSW_REG_MFSL_LEN); /* reg_mfsl_tacho * Fan tachometer index. * Access: Index */ MLXSW_ITEM32(reg, mfsl, tacho, 0x00, 24, 4); /* reg_mfsl_tach_min * Tachometer minimum value (minimum RPM). * Access: RW */ MLXSW_ITEM32(reg, mfsl, tach_min, 0x04, 0, 16); /* reg_mfsl_tach_max * Tachometer maximum value (maximum RPM). * Access: RW */ MLXSW_ITEM32(reg, mfsl, tach_max, 0x08, 0, 16); static inline void mlxsw_reg_mfsl_pack(char *payload, u8 tacho, u16 tach_min, u16 tach_max) { MLXSW_REG_ZERO(mfsl, payload); mlxsw_reg_mfsl_tacho_set(payload, tacho); mlxsw_reg_mfsl_tach_min_set(payload, tach_min); mlxsw_reg_mfsl_tach_max_set(payload, tach_max); } static inline void mlxsw_reg_mfsl_unpack(char *payload, u8 tacho, u16 *p_tach_min, u16 *p_tach_max) { if (p_tach_min) *p_tach_min = mlxsw_reg_mfsl_tach_min_get(payload); if (p_tach_max) *p_tach_max = mlxsw_reg_mfsl_tach_max_get(payload); } /* MTCAP - Management Temperature Capabilities * ------------------------------------------- * This register exposes the capabilities of the device and * system temperature sensing. */ #define MLXSW_REG_MTCAP_ID 0x9009 #define MLXSW_REG_MTCAP_LEN 0x08 MLXSW_REG_DEFINE(mtcap, MLXSW_REG_MTCAP_ID, MLXSW_REG_MTCAP_LEN); /* reg_mtcap_sensor_count * Number of sensors supported by the device. * This includes the QSFP module sensors (if exists in the QSFP module). * Access: RO */ MLXSW_ITEM32(reg, mtcap, sensor_count, 0x00, 0, 7); /* MTMP - Management Temperature * ----------------------------- * This register controls the settings of the temperature measurements * and enables reading the temperature measurements. Note that temperature * is in 0.125 degrees Celsius. */ #define MLXSW_REG_MTMP_ID 0x900A #define MLXSW_REG_MTMP_LEN 0x20 MLXSW_REG_DEFINE(mtmp, MLXSW_REG_MTMP_ID, MLXSW_REG_MTMP_LEN); /* reg_mtmp_sensor_index * Sensors index to access. * 64-127 of sensor_index are mapped to the SFP+/QSFP modules sequentially * (module 0 is mapped to sensor_index 64). * Access: Index */ MLXSW_ITEM32(reg, mtmp, sensor_index, 0x00, 0, 7); /* Convert to milli degrees Celsius */ #define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125) /* reg_mtmp_temperature * Temperature reading from the sensor. Reading is in 0.125 Celsius * degrees units. * Access: RO */ MLXSW_ITEM32(reg, mtmp, temperature, 0x04, 0, 16); /* reg_mtmp_mte * Max Temperature Enable - enables measuring the max temperature on a sensor. * Access: RW */ MLXSW_ITEM32(reg, mtmp, mte, 0x08, 31, 1); /* reg_mtmp_mtr * Max Temperature Reset - clears the value of the max temperature register. * Access: WO */ MLXSW_ITEM32(reg, mtmp, mtr, 0x08, 30, 1); /* reg_mtmp_max_temperature * The highest measured temperature from the sensor. * When the bit mte is cleared, the field max_temperature is reserved. * Access: RO */ MLXSW_ITEM32(reg, mtmp, max_temperature, 0x08, 0, 16); /* reg_mtmp_tee * Temperature Event Enable. * 0 - Do not generate event * 1 - Generate event * 2 - Generate single event * Access: RW */ MLXSW_ITEM32(reg, mtmp, tee, 0x0C, 30, 2); #define MLXSW_REG_MTMP_THRESH_HI 0x348 /* 105 Celsius */ /* reg_mtmp_temperature_threshold_hi * High threshold for Temperature Warning Event. In 0.125 Celsius. * Access: RW */ MLXSW_ITEM32(reg, mtmp, temperature_threshold_hi, 0x0C, 0, 16); /* reg_mtmp_temperature_threshold_lo * Low threshold for Temperature Warning Event. In 0.125 Celsius. * Access: RW */ MLXSW_ITEM32(reg, mtmp, temperature_threshold_lo, 0x10, 0, 16); #define MLXSW_REG_MTMP_SENSOR_NAME_SIZE 8 /* reg_mtmp_sensor_name * Sensor Name * Access: RO */ MLXSW_ITEM_BUF(reg, mtmp, sensor_name, 0x18, MLXSW_REG_MTMP_SENSOR_NAME_SIZE); static inline void mlxsw_reg_mtmp_pack(char *payload, u8 sensor_index, bool max_temp_enable, bool max_temp_reset) { MLXSW_REG_ZERO(mtmp, payload); mlxsw_reg_mtmp_sensor_index_set(payload, sensor_index); mlxsw_reg_mtmp_mte_set(payload, max_temp_enable); mlxsw_reg_mtmp_mtr_set(payload, max_temp_reset); mlxsw_reg_mtmp_temperature_threshold_hi_set(payload, MLXSW_REG_MTMP_THRESH_HI); } static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp, unsigned int *p_max_temp, char *sensor_name) { u16 temp; if (p_temp) { temp = mlxsw_reg_mtmp_temperature_get(payload); *p_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); } if (p_max_temp) { temp = mlxsw_reg_mtmp_max_temperature_get(payload); *p_max_temp = MLXSW_REG_MTMP_TEMP_TO_MC(temp); } if (sensor_name) mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name); } /* MCIA - Management Cable Info Access * ----------------------------------- * MCIA register is used to access the SFP+ and QSFP connector's EPROM. */ #define MLXSW_REG_MCIA_ID 0x9014 #define MLXSW_REG_MCIA_LEN 0x40 MLXSW_REG_DEFINE(mcia, MLXSW_REG_MCIA_ID, MLXSW_REG_MCIA_LEN); /* reg_mcia_l * Lock bit. Setting this bit will lock the access to the specific * cable. Used for updating a full page in a cable EPROM. Any access * other then subsequence writes will fail while the port is locked. * Access: RW */ MLXSW_ITEM32(reg, mcia, l, 0x00, 31, 1); /* reg_mcia_module * Module number. * Access: Index */ MLXSW_ITEM32(reg, mcia, module, 0x00, 16, 8); /* reg_mcia_status * Module status. * Access: RO */ MLXSW_ITEM32(reg, mcia, status, 0x00, 0, 8); /* reg_mcia_i2c_device_address * I2C device address. * Access: RW */ MLXSW_ITEM32(reg, mcia, i2c_device_address, 0x04, 24, 8); /* reg_mcia_page_number * Page number. * Access: RW */ MLXSW_ITEM32(reg, mcia, page_number, 0x04, 16, 8); /* reg_mcia_device_address * Device address. * Access: RW */ MLXSW_ITEM32(reg, mcia, device_address, 0x04, 0, 16); /* reg_mcia_size * Number of bytes to read/write (up to 48 bytes). * Access: RW */ MLXSW_ITEM32(reg, mcia, size, 0x08, 0, 16); #define MLXSW_SP_REG_MCIA_EEPROM_SIZE 48 /* reg_mcia_eeprom * Bytes to read/write. * Access: RW */ MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_SP_REG_MCIA_EEPROM_SIZE); static inline void mlxsw_reg_mcia_pack(char *payload, u8 module, u8 lock, u8 page_number, u16 device_addr, u8 size, u8 i2c_device_addr) { MLXSW_REG_ZERO(mcia, payload); mlxsw_reg_mcia_module_set(payload, module); mlxsw_reg_mcia_l_set(payload, lock); mlxsw_reg_mcia_page_number_set(payload, page_number); mlxsw_reg_mcia_device_address_set(payload, device_addr); mlxsw_reg_mcia_size_set(payload, size); mlxsw_reg_mcia_i2c_device_address_set(payload, i2c_device_addr); } /* MPAT - Monitoring Port Analyzer Table * ------------------------------------- * MPAT Register is used to query and configure the Switch PortAnalyzer Table. * For an enabled analyzer, all fields except e (enable) cannot be modified. */ #define MLXSW_REG_MPAT_ID 0x901A #define MLXSW_REG_MPAT_LEN 0x78 MLXSW_REG_DEFINE(mpat, MLXSW_REG_MPAT_ID, MLXSW_REG_MPAT_LEN); /* reg_mpat_pa_id * Port Analyzer ID. * Access: Index */ MLXSW_ITEM32(reg, mpat, pa_id, 0x00, 28, 4); /* reg_mpat_system_port * A unique port identifier for the final destination of the packet. * Access: RW */ MLXSW_ITEM32(reg, mpat, system_port, 0x00, 0, 16); /* reg_mpat_e * Enable. Indicating the Port Analyzer is enabled. * Access: RW */ MLXSW_ITEM32(reg, mpat, e, 0x04, 31, 1); /* reg_mpat_qos * Quality Of Service Mode. * 0: CONFIGURED - QoS parameters (Switch Priority, and encapsulation * PCP, DEI, DSCP or VL) are configured. * 1: MAINTAIN - QoS parameters (Switch Priority, Color) are the * same as in the original packet that has triggered the mirroring. For * SPAN also the pcp,dei are maintained. * Access: RW */ MLXSW_ITEM32(reg, mpat, qos, 0x04, 26, 1); /* reg_mpat_be * Best effort mode. Indicates mirroring traffic should not cause packet * drop or back pressure, but will discard the mirrored packets. Mirrored * packets will be forwarded on a best effort manner. * 0: Do not discard mirrored packets * 1: Discard mirrored packets if causing congestion * Access: RW */ MLXSW_ITEM32(reg, mpat, be, 0x04, 25, 1); static inline void mlxsw_reg_mpat_pack(char *payload, u8 pa_id, u16 system_port, bool e) { MLXSW_REG_ZERO(mpat, payload); mlxsw_reg_mpat_pa_id_set(payload, pa_id); mlxsw_reg_mpat_system_port_set(payload, system_port); mlxsw_reg_mpat_e_set(payload, e); mlxsw_reg_mpat_qos_set(payload, 1); mlxsw_reg_mpat_be_set(payload, 1); } /* MPAR - Monitoring Port Analyzer Register * ---------------------------------------- * MPAR register is used to query and configure the port analyzer port mirroring * properties. */ #define MLXSW_REG_MPAR_ID 0x901B #define MLXSW_REG_MPAR_LEN 0x08 MLXSW_REG_DEFINE(mpar, MLXSW_REG_MPAR_ID, MLXSW_REG_MPAR_LEN); /* reg_mpar_local_port * The local port to mirror the packets from. * Access: Index */ MLXSW_ITEM32(reg, mpar, local_port, 0x00, 16, 8); enum mlxsw_reg_mpar_i_e { MLXSW_REG_MPAR_TYPE_EGRESS, MLXSW_REG_MPAR_TYPE_INGRESS, }; /* reg_mpar_i_e * Ingress/Egress * Access: Index */ MLXSW_ITEM32(reg, mpar, i_e, 0x00, 0, 4); /* reg_mpar_enable * Enable mirroring * By default, port mirroring is disabled for all ports. * Access: RW */ MLXSW_ITEM32(reg, mpar, enable, 0x04, 31, 1); /* reg_mpar_pa_id * Port Analyzer ID. * Access: RW */ MLXSW_ITEM32(reg, mpar, pa_id, 0x04, 0, 4); static inline void mlxsw_reg_mpar_pack(char *payload, u8 local_port, enum mlxsw_reg_mpar_i_e i_e, bool enable, u8 pa_id) { MLXSW_REG_ZERO(mpar, payload); mlxsw_reg_mpar_local_port_set(payload, local_port); mlxsw_reg_mpar_enable_set(payload, enable); mlxsw_reg_mpar_i_e_set(payload, i_e); mlxsw_reg_mpar_pa_id_set(payload, pa_id); } /* MLCR - Management LED Control Register * -------------------------------------- * Controls the system LEDs. */ #define MLXSW_REG_MLCR_ID 0x902B #define MLXSW_REG_MLCR_LEN 0x0C MLXSW_REG_DEFINE(mlcr, MLXSW_REG_MLCR_ID, MLXSW_REG_MLCR_LEN); /* reg_mlcr_local_port * Local port number. * Access: RW */ MLXSW_ITEM32(reg, mlcr, local_port, 0x00, 16, 8); #define MLXSW_REG_MLCR_DURATION_MAX 0xFFFF /* reg_mlcr_beacon_duration * Duration of the beacon to be active, in seconds. * 0x0 - Will turn off the beacon. * 0xFFFF - Will turn on the beacon until explicitly turned off. * Access: RW */ MLXSW_ITEM32(reg, mlcr, beacon_duration, 0x04, 0, 16); /* reg_mlcr_beacon_remain * Remaining duration of the beacon, in seconds. * 0xFFFF indicates an infinite amount of time. * Access: RO */ MLXSW_ITEM32(reg, mlcr, beacon_remain, 0x08, 0, 16); static inline void mlxsw_reg_mlcr_pack(char *payload, u8 local_port, bool active) { MLXSW_REG_ZERO(mlcr, payload); mlxsw_reg_mlcr_local_port_set(payload, local_port); mlxsw_reg_mlcr_beacon_duration_set(payload, active ? MLXSW_REG_MLCR_DURATION_MAX : 0); } /* MCQI - Management Component Query Information * --------------------------------------------- * This register allows querying information about firmware components. */ #define MLXSW_REG_MCQI_ID 0x9061 #define MLXSW_REG_MCQI_BASE_LEN 0x18 #define MLXSW_REG_MCQI_CAP_LEN 0x14 #define MLXSW_REG_MCQI_LEN (MLXSW_REG_MCQI_BASE_LEN + MLXSW_REG_MCQI_CAP_LEN) MLXSW_REG_DEFINE(mcqi, MLXSW_REG_MCQI_ID, MLXSW_REG_MCQI_LEN); /* reg_mcqi_component_index * Index of the accessed component. * Access: Index */ MLXSW_ITEM32(reg, mcqi, component_index, 0x00, 0, 16); enum mlxfw_reg_mcqi_info_type { MLXSW_REG_MCQI_INFO_TYPE_CAPABILITIES, }; /* reg_mcqi_info_type * Component properties set. * Access: RW */ MLXSW_ITEM32(reg, mcqi, info_type, 0x08, 0, 5); /* reg_mcqi_offset * The requested/returned data offset from the section start, given in bytes. * Must be DWORD aligned. * Access: RW */ MLXSW_ITEM32(reg, mcqi, offset, 0x10, 0, 32); /* reg_mcqi_data_size * The requested/returned data size, given in bytes. If data_size is not DWORD * aligned, the last bytes are zero padded. * Access: RW */ MLXSW_ITEM32(reg, mcqi, data_size, 0x14, 0, 16); /* reg_mcqi_cap_max_component_size * Maximum size for this component, given in bytes. * Access: RO */ MLXSW_ITEM32(reg, mcqi, cap_max_component_size, 0x20, 0, 32); /* reg_mcqi_cap_log_mcda_word_size * Log 2 of the access word size in bytes. Read and write access must be aligned * to the word size. Write access must be done for an integer number of words. * Access: RO */ MLXSW_ITEM32(reg, mcqi, cap_log_mcda_word_size, 0x24, 28, 4); /* reg_mcqi_cap_mcda_max_write_size * Maximal write size for MCDA register * Access: RO */ MLXSW_ITEM32(reg, mcqi, cap_mcda_max_write_size, 0x24, 0, 16); static inline void mlxsw_reg_mcqi_pack(char *payload, u16 component_index) { MLXSW_REG_ZERO(mcqi, payload); mlxsw_reg_mcqi_component_index_set(payload, component_index); mlxsw_reg_mcqi_info_type_set(payload, MLXSW_REG_MCQI_INFO_TYPE_CAPABILITIES); mlxsw_reg_mcqi_offset_set(payload, 0); mlxsw_reg_mcqi_data_size_set(payload, MLXSW_REG_MCQI_CAP_LEN); } static inline void mlxsw_reg_mcqi_unpack(char *payload, u32 *p_cap_max_component_size, u8 *p_cap_log_mcda_word_size, u16 *p_cap_mcda_max_write_size) { *p_cap_max_component_size = mlxsw_reg_mcqi_cap_max_component_size_get(payload); *p_cap_log_mcda_word_size = mlxsw_reg_mcqi_cap_log_mcda_word_size_get(payload); *p_cap_mcda_max_write_size = mlxsw_reg_mcqi_cap_mcda_max_write_size_get(payload); } /* MCC - Management Component Control * ---------------------------------- * Controls the firmware component and updates the FSM. */ #define MLXSW_REG_MCC_ID 0x9062 #define MLXSW_REG_MCC_LEN 0x1C MLXSW_REG_DEFINE(mcc, MLXSW_REG_MCC_ID, MLXSW_REG_MCC_LEN); enum mlxsw_reg_mcc_instruction { MLXSW_REG_MCC_INSTRUCTION_LOCK_UPDATE_HANDLE = 0x01, MLXSW_REG_MCC_INSTRUCTION_RELEASE_UPDATE_HANDLE = 0x02, MLXSW_REG_MCC_INSTRUCTION_UPDATE_COMPONENT = 0x03, MLXSW_REG_MCC_INSTRUCTION_VERIFY_COMPONENT = 0x04, MLXSW_REG_MCC_INSTRUCTION_ACTIVATE = 0x06, MLXSW_REG_MCC_INSTRUCTION_CANCEL = 0x08, }; /* reg_mcc_instruction * Command to be executed by the FSM. * Applicable for write operation only. * Access: RW */ MLXSW_ITEM32(reg, mcc, instruction, 0x00, 0, 8); /* reg_mcc_component_index * Index of the accessed component. Applicable only for commands that * refer to components. Otherwise, this field is reserved. * Access: Index */ MLXSW_ITEM32(reg, mcc, component_index, 0x04, 0, 16); /* reg_mcc_update_handle * Token representing the current flow executed by the FSM. * Access: WO */ MLXSW_ITEM32(reg, mcc, update_handle, 0x08, 0, 24); /* reg_mcc_error_code * Indicates the successful completion of the instruction, or the reason it * failed * Access: RO */ MLXSW_ITEM32(reg, mcc, error_code, 0x0C, 8, 8); /* reg_mcc_control_state * Current FSM state * Access: RO */ MLXSW_ITEM32(reg, mcc, control_state, 0x0C, 0, 4); /* reg_mcc_component_size * Component size in bytes. Valid for UPDATE_COMPONENT instruction. Specifying * the size may shorten the update time. Value 0x0 means that size is * unspecified. * Access: WO */ MLXSW_ITEM32(reg, mcc, component_size, 0x10, 0, 32); static inline void mlxsw_reg_mcc_pack(char *payload, enum mlxsw_reg_mcc_instruction instr, u16 component_index, u32 update_handle, u32 component_size) { MLXSW_REG_ZERO(mcc, payload); mlxsw_reg_mcc_instruction_set(payload, instr); mlxsw_reg_mcc_component_index_set(payload, component_index); mlxsw_reg_mcc_update_handle_set(payload, update_handle); mlxsw_reg_mcc_component_size_set(payload, component_size); } static inline void mlxsw_reg_mcc_unpack(char *payload, u32 *p_update_handle, u8 *p_error_code, u8 *p_control_state) { if (p_update_handle) *p_update_handle = mlxsw_reg_mcc_update_handle_get(payload); if (p_error_code) *p_error_code = mlxsw_reg_mcc_error_code_get(payload); if (p_control_state) *p_control_state = mlxsw_reg_mcc_control_state_get(payload); } /* MCDA - Management Component Data Access * --------------------------------------- * This register allows reading and writing a firmware component. */ #define MLXSW_REG_MCDA_ID 0x9063 #define MLXSW_REG_MCDA_BASE_LEN 0x10 #define MLXSW_REG_MCDA_MAX_DATA_LEN 0x80 #define MLXSW_REG_MCDA_LEN \ (MLXSW_REG_MCDA_BASE_LEN + MLXSW_REG_MCDA_MAX_DATA_LEN) MLXSW_REG_DEFINE(mcda, MLXSW_REG_MCDA_ID, MLXSW_REG_MCDA_LEN); /* reg_mcda_update_handle * Token representing the current flow executed by the FSM. * Access: RW */ MLXSW_ITEM32(reg, mcda, update_handle, 0x00, 0, 24); /* reg_mcda_offset * Offset of accessed address relative to component start. Accesses must be in * accordance to log_mcda_word_size in MCQI reg. * Access: RW */ MLXSW_ITEM32(reg, mcda, offset, 0x04, 0, 32); /* reg_mcda_size * Size of the data accessed, given in bytes. * Access: RW */ MLXSW_ITEM32(reg, mcda, size, 0x08, 0, 16); /* reg_mcda_data * Data block accessed. * Access: RW */ MLXSW_ITEM32_INDEXED(reg, mcda, data, 0x10, 0, 32, 4, 0, false); static inline void mlxsw_reg_mcda_pack(char *payload, u32 update_handle, u32 offset, u16 size, u8 *data) { int i; MLXSW_REG_ZERO(mcda, payload); mlxsw_reg_mcda_update_handle_set(payload, update_handle); mlxsw_reg_mcda_offset_set(payload, offset); mlxsw_reg_mcda_size_set(payload, size); for (i = 0; i < size / 4; i++) mlxsw_reg_mcda_data_set(payload, i, *(u32 *) &data[i * 4]); } /* MPSC - Monitoring Packet Sampling Configuration Register * -------------------------------------------------------- * MPSC Register is used to configure the Packet Sampling mechanism. */ #define MLXSW_REG_MPSC_ID 0x9080 #define MLXSW_REG_MPSC_LEN 0x1C MLXSW_REG_DEFINE(mpsc, MLXSW_REG_MPSC_ID, MLXSW_REG_MPSC_LEN); /* reg_mpsc_local_port * Local port number * Not supported for CPU port * Access: Index */ MLXSW_ITEM32(reg, mpsc, local_port, 0x00, 16, 8); /* reg_mpsc_e * Enable sampling on port local_port * Access: RW */ MLXSW_ITEM32(reg, mpsc, e, 0x04, 30, 1); #define MLXSW_REG_MPSC_RATE_MAX 3500000000UL /* reg_mpsc_rate * Sampling rate = 1 out of rate packets (with randomization around * the point). Valid values are: 1 to MLXSW_REG_MPSC_RATE_MAX * Access: RW */ MLXSW_ITEM32(reg, mpsc, rate, 0x08, 0, 32); static inline void mlxsw_reg_mpsc_pack(char *payload, u8 local_port, bool e, u32 rate) { MLXSW_REG_ZERO(mpsc, payload); mlxsw_reg_mpsc_local_port_set(payload, local_port); mlxsw_reg_mpsc_e_set(payload, e); mlxsw_reg_mpsc_rate_set(payload, rate); } /* MGPC - Monitoring General Purpose Counter Set Register * The MGPC register retrieves and sets the General Purpose Counter Set. */ #define MLXSW_REG_MGPC_ID 0x9081 #define MLXSW_REG_MGPC_LEN 0x18 MLXSW_REG_DEFINE(mgpc, MLXSW_REG_MGPC_ID, MLXSW_REG_MGPC_LEN); /* reg_mgpc_counter_set_type * Counter set type. * Access: OP */ MLXSW_ITEM32(reg, mgpc, counter_set_type, 0x00, 24, 8); /* reg_mgpc_counter_index * Counter index. * Access: Index */ MLXSW_ITEM32(reg, mgpc, counter_index, 0x00, 0, 24); enum mlxsw_reg_mgpc_opcode { /* Nop */ MLXSW_REG_MGPC_OPCODE_NOP = 0x00, /* Clear counters */ MLXSW_REG_MGPC_OPCODE_CLEAR = 0x08, }; /* reg_mgpc_opcode * Opcode. * Access: OP */ MLXSW_ITEM32(reg, mgpc, opcode, 0x04, 28, 4); /* reg_mgpc_byte_counter * Byte counter value. * Access: RW */ MLXSW_ITEM64(reg, mgpc, byte_counter, 0x08, 0, 64); /* reg_mgpc_packet_counter * Packet counter value. * Access: RW */ MLXSW_ITEM64(reg, mgpc, packet_counter, 0x10, 0, 64); static inline void mlxsw_reg_mgpc_pack(char *payload, u32 counter_index, enum mlxsw_reg_mgpc_opcode opcode, enum mlxsw_reg_flow_counter_set_type set_type) { MLXSW_REG_ZERO(mgpc, payload); mlxsw_reg_mgpc_counter_index_set(payload, counter_index); mlxsw_reg_mgpc_counter_set_type_set(payload, set_type); mlxsw_reg_mgpc_opcode_set(payload, opcode); } /* TIGCR - Tunneling IPinIP General Configuration Register * ------------------------------------------------------- * The TIGCR register is used for setting up the IPinIP Tunnel configuration. */ #define MLXSW_REG_TIGCR_ID 0xA801 #define MLXSW_REG_TIGCR_LEN 0x10 MLXSW_REG_DEFINE(tigcr, MLXSW_REG_TIGCR_ID, MLXSW_REG_TIGCR_LEN); /* reg_tigcr_ipip_ttlc * For IPinIP Tunnel encapsulation: whether to copy the ttl from the packet * header. * Access: RW */ MLXSW_ITEM32(reg, tigcr, ttlc, 0x04, 8, 1); /* reg_tigcr_ipip_ttl_uc * The TTL for IPinIP Tunnel encapsulation of unicast packets if * reg_tigcr_ipip_ttlc is unset. * Access: RW */ MLXSW_ITEM32(reg, tigcr, ttl_uc, 0x04, 0, 8); static inline void mlxsw_reg_tigcr_pack(char *payload, bool ttlc, u8 ttl_uc) { MLXSW_REG_ZERO(tigcr, payload); mlxsw_reg_tigcr_ttlc_set(payload, ttlc); mlxsw_reg_tigcr_ttl_uc_set(payload, ttl_uc); } /* SBPR - Shared Buffer Pools Register * ----------------------------------- * The SBPR configures and retrieves the shared buffer pools and configuration. */ #define MLXSW_REG_SBPR_ID 0xB001 #define MLXSW_REG_SBPR_LEN 0x14 MLXSW_REG_DEFINE(sbpr, MLXSW_REG_SBPR_ID, MLXSW_REG_SBPR_LEN); /* shared direstion enum for SBPR, SBCM, SBPM */ enum mlxsw_reg_sbxx_dir { MLXSW_REG_SBXX_DIR_INGRESS, MLXSW_REG_SBXX_DIR_EGRESS, }; /* reg_sbpr_dir * Direction. * Access: Index */ MLXSW_ITEM32(reg, sbpr, dir, 0x00, 24, 2); /* reg_sbpr_pool * Pool index. * Access: Index */ MLXSW_ITEM32(reg, sbpr, pool, 0x00, 0, 4); /* reg_sbpr_size * Pool size in buffer cells. * Access: RW */ MLXSW_ITEM32(reg, sbpr, size, 0x04, 0, 24); enum mlxsw_reg_sbpr_mode { MLXSW_REG_SBPR_MODE_STATIC, MLXSW_REG_SBPR_MODE_DYNAMIC, }; /* reg_sbpr_mode * Pool quota calculation mode. * Access: RW */ MLXSW_ITEM32(reg, sbpr, mode, 0x08, 0, 4); static inline void mlxsw_reg_sbpr_pack(char *payload, u8 pool, enum mlxsw_reg_sbxx_dir dir, enum mlxsw_reg_sbpr_mode mode, u32 size) { MLXSW_REG_ZERO(sbpr, payload); mlxsw_reg_sbpr_pool_set(payload, pool); mlxsw_reg_sbpr_dir_set(payload, dir); mlxsw_reg_sbpr_mode_set(payload, mode); mlxsw_reg_sbpr_size_set(payload, size); } /* SBCM - Shared Buffer Class Management Register * ---------------------------------------------- * The SBCM register configures and retrieves the shared buffer allocation * and configuration according to Port-PG, including the binding to pool * and definition of the associated quota. */ #define MLXSW_REG_SBCM_ID 0xB002 #define MLXSW_REG_SBCM_LEN 0x28 MLXSW_REG_DEFINE(sbcm, MLXSW_REG_SBCM_ID, MLXSW_REG_SBCM_LEN); /* reg_sbcm_local_port * Local port number. * For Ingress: excludes CPU port and Router port * For Egress: excludes IP Router * Access: Index */ MLXSW_ITEM32(reg, sbcm, local_port, 0x00, 16, 8); /* reg_sbcm_pg_buff * PG buffer - Port PG (dir=ingress) / traffic class (dir=egress) * For PG buffer: range is 0..cap_max_pg_buffers - 1 * For traffic class: range is 0..cap_max_tclass - 1 * Note that when traffic class is in MC aware mode then the traffic * classes which are MC aware cannot be configured. * Access: Index */ MLXSW_ITEM32(reg, sbcm, pg_buff, 0x00, 8, 6); /* reg_sbcm_dir * Direction. * Access: Index */ MLXSW_ITEM32(reg, sbcm, dir, 0x00, 0, 2); /* reg_sbcm_min_buff * Minimum buffer size for the limiter, in cells. * Access: RW */ MLXSW_ITEM32(reg, sbcm, min_buff, 0x18, 0, 24); /* shared max_buff limits for dynamic threshold for SBCM, SBPM */ #define MLXSW_REG_SBXX_DYN_MAX_BUFF_MIN 1 #define MLXSW_REG_SBXX_DYN_MAX_BUFF_MAX 14 /* reg_sbcm_max_buff * When the pool associated to the port-pg/tclass is configured to * static, Maximum buffer size for the limiter configured in cells. * When the pool associated to the port-pg/tclass is configured to * dynamic, the max_buff holds the "alpha" parameter, supporting * the following values: * 0: 0 * i: (1/128)*2^(i-1), for i=1..14 * 0xFF: Infinity * Access: RW */ MLXSW_ITEM32(reg, sbcm, max_buff, 0x1C, 0, 24); /* reg_sbcm_pool * Association of the port-priority to a pool. * Access: RW */ MLXSW_ITEM32(reg, sbcm, pool, 0x24, 0, 4); static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff, enum mlxsw_reg_sbxx_dir dir, u32 min_buff, u32 max_buff, u8 pool) { MLXSW_REG_ZERO(sbcm, payload); mlxsw_reg_sbcm_local_port_set(payload, local_port); mlxsw_reg_sbcm_pg_buff_set(payload, pg_buff); mlxsw_reg_sbcm_dir_set(payload, dir); mlxsw_reg_sbcm_min_buff_set(payload, min_buff); mlxsw_reg_sbcm_max_buff_set(payload, max_buff); mlxsw_reg_sbcm_pool_set(payload, pool); } /* SBPM - Shared Buffer Port Management Register * --------------------------------------------- * The SBPM register configures and retrieves the shared buffer allocation * and configuration according to Port-Pool, including the definition * of the associated quota. */ #define MLXSW_REG_SBPM_ID 0xB003 #define MLXSW_REG_SBPM_LEN 0x28 MLXSW_REG_DEFINE(sbpm, MLXSW_REG_SBPM_ID, MLXSW_REG_SBPM_LEN); /* reg_sbpm_local_port * Local port number. * For Ingress: excludes CPU port and Router port * For Egress: excludes IP Router * Access: Index */ MLXSW_ITEM32(reg, sbpm, local_port, 0x00, 16, 8); /* reg_sbpm_pool * The pool associated to quota counting on the local_port. * Access: Index */ MLXSW_ITEM32(reg, sbpm, pool, 0x00, 8, 4); /* reg_sbpm_dir * Direction. * Access: Index */ MLXSW_ITEM32(reg, sbpm, dir, 0x00, 0, 2); /* reg_sbpm_buff_occupancy * Current buffer occupancy in cells. * Access: RO */ MLXSW_ITEM32(reg, sbpm, buff_occupancy, 0x10, 0, 24); /* reg_sbpm_clr * Clear Max Buffer Occupancy * When this bit is set, max_buff_occupancy field is cleared (and a * new max value is tracked from the time the clear was performed). * Access: OP */ MLXSW_ITEM32(reg, sbpm, clr, 0x14, 31, 1); /* reg_sbpm_max_buff_occupancy * Maximum value of buffer occupancy in cells monitored. Cleared by * writing to the clr field. * Access: RO */ MLXSW_ITEM32(reg, sbpm, max_buff_occupancy, 0x14, 0, 24); /* reg_sbpm_min_buff * Minimum buffer size for the limiter, in cells. * Access: RW */ MLXSW_ITEM32(reg, sbpm, min_buff, 0x18, 0, 24); /* reg_sbpm_max_buff * When the pool associated to the port-pg/tclass is configured to * static, Maximum buffer size for the limiter configured in cells. * When the pool associated to the port-pg/tclass is configured to * dynamic, the max_buff holds the "alpha" parameter, supporting * the following values: * 0: 0 * i: (1/128)*2^(i-1), for i=1..14 * 0xFF: Infinity * Access: RW */ MLXSW_ITEM32(reg, sbpm, max_buff, 0x1C, 0, 24); static inline void mlxsw_reg_sbpm_pack(char *payload, u8 local_port, u8 pool, enum mlxsw_reg_sbxx_dir dir, bool clr, u32 min_buff, u32 max_buff) { MLXSW_REG_ZERO(sbpm, payload); mlxsw_reg_sbpm_local_port_set(payload, local_port); mlxsw_reg_sbpm_pool_set(payload, pool); mlxsw_reg_sbpm_dir_set(payload, dir); mlxsw_reg_sbpm_clr_set(payload, clr); mlxsw_reg_sbpm_min_buff_set(payload, min_buff); mlxsw_reg_sbpm_max_buff_set(payload, max_buff); } static inline void mlxsw_reg_sbpm_unpack(char *payload, u32 *p_buff_occupancy, u32 *p_max_buff_occupancy) { *p_buff_occupancy = mlxsw_reg_sbpm_buff_occupancy_get(payload); *p_max_buff_occupancy = mlxsw_reg_sbpm_max_buff_occupancy_get(payload); } /* SBMM - Shared Buffer Multicast Management Register * -------------------------------------------------- * The SBMM register configures and retrieves the shared buffer allocation * and configuration for MC packets according to Switch-Priority, including * the binding to pool and definition of the associated quota. */ #define MLXSW_REG_SBMM_ID 0xB004 #define MLXSW_REG_SBMM_LEN 0x28 MLXSW_REG_DEFINE(sbmm, MLXSW_REG_SBMM_ID, MLXSW_REG_SBMM_LEN); /* reg_sbmm_prio * Switch Priority. * Access: Index */ MLXSW_ITEM32(reg, sbmm, prio, 0x00, 8, 4); /* reg_sbmm_min_buff * Minimum buffer size for the limiter, in cells. * Access: RW */ MLXSW_ITEM32(reg, sbmm, min_buff, 0x18, 0, 24); /* reg_sbmm_max_buff * When the pool associated to the port-pg/tclass is configured to * static, Maximum buffer size for the limiter configured in cells. * When the pool associated to the port-pg/tclass is configured to * dynamic, the max_buff holds the "alpha" parameter, supporting * the following values: * 0: 0 * i: (1/128)*2^(i-1), for i=1..14 * 0xFF: Infinity * Access: RW */ MLXSW_ITEM32(reg, sbmm, max_buff, 0x1C, 0, 24); /* reg_sbmm_pool * Association of the port-priority to a pool. * Access: RW */ MLXSW_ITEM32(reg, sbmm, pool, 0x24, 0, 4); static inline void mlxsw_reg_sbmm_pack(char *payload, u8 prio, u32 min_buff, u32 max_buff, u8 pool) { MLXSW_REG_ZERO(sbmm, payload); mlxsw_reg_sbmm_prio_set(payload, prio); mlxsw_reg_sbmm_min_buff_set(payload, min_buff); mlxsw_reg_sbmm_max_buff_set(payload, max_buff); mlxsw_reg_sbmm_pool_set(payload, pool); } /* SBSR - Shared Buffer Status Register * ------------------------------------ * The SBSR register retrieves the shared buffer occupancy according to * Port-Pool. Note that this register enables reading a large amount of data. * It is the user's responsibility to limit the amount of data to ensure the * response can match the maximum transfer unit. In case the response exceeds * the maximum transport unit, it will be truncated with no special notice. */ #define MLXSW_REG_SBSR_ID 0xB005 #define MLXSW_REG_SBSR_BASE_LEN 0x5C /* base length, without records */ #define MLXSW_REG_SBSR_REC_LEN 0x8 /* record length */ #define MLXSW_REG_SBSR_REC_MAX_COUNT 120 #define MLXSW_REG_SBSR_LEN (MLXSW_REG_SBSR_BASE_LEN + \ MLXSW_REG_SBSR_REC_LEN * \ MLXSW_REG_SBSR_REC_MAX_COUNT) MLXSW_REG_DEFINE(sbsr, MLXSW_REG_SBSR_ID, MLXSW_REG_SBSR_LEN); /* reg_sbsr_clr * Clear Max Buffer Occupancy. When this bit is set, the max_buff_occupancy * field is cleared (and a new max value is tracked from the time the clear * was performed). * Access: OP */ MLXSW_ITEM32(reg, sbsr, clr, 0x00, 31, 1); /* reg_sbsr_ingress_port_mask * Bit vector for all ingress network ports. * Indicates which of the ports (for which the relevant bit is set) * are affected by the set operation. Configuration of any other port * does not change. * Access: Index */ MLXSW_ITEM_BIT_ARRAY(reg, sbsr, ingress_port_mask, 0x10, 0x20, 1); /* reg_sbsr_pg_buff_mask * Bit vector for all switch priority groups. * Indicates which of the priorities (for which the relevant bit is set) * are affected by the set operation. Configuration of any other priority * does not change. * Range is 0..cap_max_pg_buffers - 1 * Access: Index */ MLXSW_ITEM_BIT_ARRAY(reg, sbsr, pg_buff_mask, 0x30, 0x4, 1); /* reg_sbsr_egress_port_mask * Bit vector for all egress network ports. * Indicates which of the ports (for which the relevant bit is set) * are affected by the set operation. Configuration of any other port * does not change. * Access: Index */ MLXSW_ITEM_BIT_ARRAY(reg, sbsr, egress_port_mask, 0x34, 0x20, 1); /* reg_sbsr_tclass_mask * Bit vector for all traffic classes. * Indicates which of the traffic classes (for which the relevant bit is * set) are affected by the set operation. Configuration of any other * traffic class does not change. * Range is 0..cap_max_tclass - 1 * Access: Index */ MLXSW_ITEM_BIT_ARRAY(reg, sbsr, tclass_mask, 0x54, 0x8, 1); static inline void mlxsw_reg_sbsr_pack(char *payload, bool clr) { MLXSW_REG_ZERO(sbsr, payload); mlxsw_reg_sbsr_clr_set(payload, clr); } /* reg_sbsr_rec_buff_occupancy * Current buffer occupancy in cells. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sbsr, rec_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN, 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x00, false); /* reg_sbsr_rec_max_buff_occupancy * Maximum value of buffer occupancy in cells monitored. Cleared by * writing to the clr field. * Access: RO */ MLXSW_ITEM32_INDEXED(reg, sbsr, rec_max_buff_occupancy, MLXSW_REG_SBSR_BASE_LEN, 0, 24, MLXSW_REG_SBSR_REC_LEN, 0x04, false); static inline void mlxsw_reg_sbsr_rec_unpack(char *payload, int rec_index, u32 *p_buff_occupancy, u32 *p_max_buff_occupancy) { *p_buff_occupancy = mlxsw_reg_sbsr_rec_buff_occupancy_get(payload, rec_index); *p_max_buff_occupancy = mlxsw_reg_sbsr_rec_max_buff_occupancy_get(payload, rec_index); } /* SBIB - Shared Buffer Internal Buffer Register * --------------------------------------------- * The SBIB register configures per port buffers for internal use. The internal * buffers consume memory on the port buffers (note that the port buffers are * used also by PBMC). * * For Spectrum this is used for egress mirroring. */ #define MLXSW_REG_SBIB_ID 0xB006 #define MLXSW_REG_SBIB_LEN 0x10 MLXSW_REG_DEFINE(sbib, MLXSW_REG_SBIB_ID, MLXSW_REG_SBIB_LEN); /* reg_sbib_local_port * Local port number * Not supported for CPU port and router port * Access: Index */ MLXSW_ITEM32(reg, sbib, local_port, 0x00, 16, 8); /* reg_sbib_buff_size * Units represented in cells * Allowed range is 0 to (cap_max_headroom_size - 1) * Default is 0 * Access: RW */ MLXSW_ITEM32(reg, sbib, buff_size, 0x08, 0, 24); static inline void mlxsw_reg_sbib_pack(char *payload, u8 local_port, u32 buff_size) { MLXSW_REG_ZERO(sbib, payload); mlxsw_reg_sbib_local_port_set(payload, local_port); mlxsw_reg_sbib_buff_size_set(payload, buff_size); } static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(sgcr), MLXSW_REG(spad), MLXSW_REG(smid), MLXSW_REG(sspr), MLXSW_REG(sfdat), MLXSW_REG(sfd), MLXSW_REG(sfn), MLXSW_REG(spms), MLXSW_REG(spvid), MLXSW_REG(spvm), MLXSW_REG(spaft), MLXSW_REG(sfgc), MLXSW_REG(sftr), MLXSW_REG(sfdf), MLXSW_REG(sldr), MLXSW_REG(slcr), MLXSW_REG(slcor), MLXSW_REG(spmlr), MLXSW_REG(svfa), MLXSW_REG(svpe), MLXSW_REG(sfmr), MLXSW_REG(spvmlr), MLXSW_REG(ppbt), MLXSW_REG(pacl), MLXSW_REG(pagt), MLXSW_REG(ptar), MLXSW_REG(ppbs), MLXSW_REG(prcr), MLXSW_REG(pefa), MLXSW_REG(ptce2), MLXSW_REG(qpcr), MLXSW_REG(qtct), MLXSW_REG(qeec), MLXSW_REG(pmlp), MLXSW_REG(pmtu), MLXSW_REG(ptys), MLXSW_REG(ppad), MLXSW_REG(paos), MLXSW_REG(pfcc), MLXSW_REG(ppcnt), MLXSW_REG(plib), MLXSW_REG(pptb), MLXSW_REG(pbmc), MLXSW_REG(pspa), MLXSW_REG(htgt), MLXSW_REG(hpkt), MLXSW_REG(rgcr), MLXSW_REG(ritr), MLXSW_REG(ratr), MLXSW_REG(rtdp), MLXSW_REG(ricnt), MLXSW_REG(ralta), MLXSW_REG(ralst), MLXSW_REG(raltb), MLXSW_REG(ralue), MLXSW_REG(rauht), MLXSW_REG(raleu), MLXSW_REG(rauhtd), MLXSW_REG(mfcr), MLXSW_REG(mfsc), MLXSW_REG(mfsm), MLXSW_REG(mfsl), MLXSW_REG(mtcap), MLXSW_REG(mtmp), MLXSW_REG(mcia), MLXSW_REG(mpat), MLXSW_REG(mpar), MLXSW_REG(mlcr), MLXSW_REG(mpsc), MLXSW_REG(mcqi), MLXSW_REG(mcc), MLXSW_REG(mcda), MLXSW_REG(mgpc), MLXSW_REG(tigcr), MLXSW_REG(sbpr), MLXSW_REG(sbcm), MLXSW_REG(sbpm), MLXSW_REG(sbmm), MLXSW_REG(sbsr), MLXSW_REG(sbib), }; static inline const char *mlxsw_reg_id_str(u16 reg_id) { const struct mlxsw_reg_info *reg_info; int i; for (i = 0; i < ARRAY_SIZE(mlxsw_reg_infos); i++) { reg_info = mlxsw_reg_infos[i]; if (reg_info->id == reg_id) return reg_info->name; } return "*UNKNOWN*"; } /* PUDE - Port Up / Down Event * --------------------------- * Reports the operational state change of a port. */ #define MLXSW_REG_PUDE_LEN 0x10 /* reg_pude_swid * Switch partition ID with which to associate the port. * Access: Index */ MLXSW_ITEM32(reg, pude, swid, 0x00, 24, 8); /* reg_pude_local_port * Local port number. * Access: Index */ MLXSW_ITEM32(reg, pude, local_port, 0x00, 16, 8); /* reg_pude_admin_status * Port administrative state (the desired state). * 1 - Up. * 2 - Down. * 3 - Up once. This means that in case of link failure, the port won't go * into polling mode, but will wait to be re-enabled by software. * 4 - Disabled by system. Can only be set by hardware. * Access: RO */ MLXSW_ITEM32(reg, pude, admin_status, 0x00, 8, 4); /* reg_pude_oper_status * Port operatioanl state. * 1 - Up. * 2 - Down. * 3 - Down by port failure. This means that the device will not let the * port up again until explicitly specified by software. * Access: RO */ MLXSW_ITEM32(reg, pude, oper_status, 0x00, 0, 4); #endif