// SPDX-License-Identifier: GPL-2.0-only /******************************************************************************* This is the driver for the MAC 10/100 on-chip Ethernet controller currently tested on all the ST boards based on STb7109 and stx7200 SoCs. DWC Ether MAC 10/100 Universal version 4.0 has been used for developing this code. This contains the functions to handle the dma. Copyright (C) 2007-2009 STMicroelectronics Ltd Author: Giuseppe Cavallaro *******************************************************************************/ #include #include "dwmac100.h" #include "dwmac_dma.h" static void dwmac100_dma_init(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, int atds) { /* Enable Application Access by writing to DMA CSR0 */ writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT), ioaddr + DMA_BUS_MODE); /* Mask interrupts by writing to CSR7 */ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); } static void dwmac100_dma_init_rx(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, dma_addr_t dma_rx_phy, u32 chan) { /* RX descriptor base addr lists must be written into DMA CSR3 */ writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR); } static void dwmac100_dma_init_tx(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg, dma_addr_t dma_tx_phy, u32 chan) { /* TX descriptor base addr lists must be written into DMA CSR4 */ writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR); } /* Store and Forward capability is not used at all. * * The transmit threshold can be programmed by setting the TTC bits in the DMA * control register. */ static void dwmac100_dma_operation_mode_tx(void __iomem *ioaddr, int mode, u32 channel, int fifosz, u8 qmode) { u32 csr6 = readl(ioaddr + DMA_CONTROL); if (mode <= 32) csr6 |= DMA_CONTROL_TTC_32; else if (mode <= 64) csr6 |= DMA_CONTROL_TTC_64; else csr6 |= DMA_CONTROL_TTC_128; writel(csr6, ioaddr + DMA_CONTROL); } static void dwmac100_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space) { int i; for (i = 0; i < NUM_DWMAC100_DMA_REGS; i++) reg_space[DMA_BUS_MODE / 4 + i] = readl(ioaddr + DMA_BUS_MODE + i * 4); reg_space[DMA_CUR_TX_BUF_ADDR / 4] = readl(ioaddr + DMA_CUR_TX_BUF_ADDR); reg_space[DMA_CUR_RX_BUF_ADDR / 4] = readl(ioaddr + DMA_CUR_RX_BUF_ADDR); } /* DMA controller has two counters to track the number of the missed frames. */ static void dwmac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x, void __iomem *ioaddr) { struct net_device_stats *stats = (struct net_device_stats *)data; u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR); if (unlikely(csr8)) { if (csr8 & DMA_MISSED_FRAME_OVE) { stats->rx_over_errors += 0x800; x->rx_overflow_cntr += 0x800; } else { unsigned int ove_cntr; ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17); stats->rx_over_errors += ove_cntr; x->rx_overflow_cntr += ove_cntr; } if (csr8 & DMA_MISSED_FRAME_OVE_M) { stats->rx_missed_errors += 0xffff; x->rx_missed_cntr += 0xffff; } else { unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR); stats->rx_missed_errors += miss_f; x->rx_missed_cntr += miss_f; } } } const struct stmmac_dma_ops dwmac100_dma_ops = { .reset = dwmac_dma_reset, .init = dwmac100_dma_init, .init_rx_chan = dwmac100_dma_init_rx, .init_tx_chan = dwmac100_dma_init_tx, .dump_regs = dwmac100_dump_dma_regs, .dma_tx_mode = dwmac100_dma_operation_mode_tx, .dma_diagnostic_fr = dwmac100_dma_diagnostic_fr, .enable_dma_transmission = dwmac_enable_dma_transmission, .enable_dma_irq = dwmac_enable_dma_irq, .disable_dma_irq = dwmac_disable_dma_irq, .start_tx = dwmac_dma_start_tx, .stop_tx = dwmac_dma_stop_tx, .start_rx = dwmac_dma_start_rx, .stop_rx = dwmac_dma_stop_rx, .dma_interrupt = dwmac_dma_interrupt, };