/********************************************************************* * * Filename: act200l.c * Version: 0.8 * Description: Implementation for the ACTiSYS ACT-IR200L dongle * Status: Experimental. * Author: SHIMIZU Takuya * Created at: Fri Aug 3 17:35:42 2001 * Modified at: Fri Aug 17 10:22:40 2001 * Modified by: SHIMIZU Takuya * * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * ********************************************************************/ #include #include #include #include #include #include static int act200l_reset(struct irda_task *task); static void act200l_open(dongle_t *self, struct qos_info *qos); static void act200l_close(dongle_t *self); static int act200l_change_speed(struct irda_task *task); /* Regsiter 0: Control register #1 */ #define ACT200L_REG0 0x00 #define ACT200L_TXEN 0x01 /* Enable transmitter */ #define ACT200L_RXEN 0x02 /* Enable receiver */ /* Register 1: Control register #2 */ #define ACT200L_REG1 0x10 #define ACT200L_LODB 0x01 /* Load new baud rate count value */ #define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */ /* Register 4: Output Power register */ #define ACT200L_REG4 0x40 #define ACT200L_OP0 0x01 /* Enable LED1C output */ #define ACT200L_OP1 0x02 /* Enable LED2C output */ #define ACT200L_BLKR 0x04 /* Register 5: Receive Mode register */ #define ACT200L_REG5 0x50 #define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */ /* Register 6: Receive Sensitivity register #1 */ #define ACT200L_REG6 0x60 #define ACT200L_RS0 0x01 /* receive threshold bit 0 */ #define ACT200L_RS1 0x02 /* receive threshold bit 1 */ /* Register 7: Receive Sensitivity register #2 */ #define ACT200L_REG7 0x70 #define ACT200L_ENPOS 0x04 /* Ignore the falling edge */ /* Register 8,9: Baud Rate Dvider register #1,#2 */ #define ACT200L_REG8 0x80 #define ACT200L_REG9 0x90 #define ACT200L_2400 0x5f #define ACT200L_9600 0x17 #define ACT200L_19200 0x0b #define ACT200L_38400 0x05 #define ACT200L_57600 0x03 #define ACT200L_115200 0x01 /* Register 13: Control register #3 */ #define ACT200L_REG13 0xd0 #define ACT200L_SHDW 0x01 /* Enable access to shadow registers */ /* Register 15: Status register */ #define ACT200L_REG15 0xf0 /* Register 21: Control register #4 */ #define ACT200L_REG21 0x50 #define ACT200L_EXCK 0x02 /* Disable clock output driver */ #define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */ static struct dongle_reg dongle = { .type = IRDA_ACT200L_DONGLE, .open = act200l_open, .close = act200l_close, .reset = act200l_reset, .change_speed = act200l_change_speed, .owner = THIS_MODULE, }; static int __init act200l_init(void) { return irda_device_register_dongle(&dongle); } static void __exit act200l_cleanup(void) { irda_device_unregister_dongle(&dongle); } static void act200l_open(dongle_t *self, struct qos_info *qos) { IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); /* Power on the dongle */ self->set_dtr_rts(self->dev, TRUE, TRUE); /* Set the speeds we can accept */ qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; qos->min_turn_time.bits = 0x03; } static void act200l_close(dongle_t *self) { IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); /* Power off the dongle */ self->set_dtr_rts(self->dev, FALSE, FALSE); } /* * Function act200l_change_speed (dev, speed) * * Set the speed for the ACTiSYS ACT-IR200L type dongle. * */ static int act200l_change_speed(struct irda_task *task) { dongle_t *self = (dongle_t *) task->instance; __u32 speed = (__u32) task->param; __u8 control[3]; int ret = 0; IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); self->speed_task = task; switch (task->state) { case IRDA_TASK_INIT: if (irda_task_execute(self, act200l_reset, NULL, task, (void *) speed)) { /* Dongle need more time to reset */ irda_task_next_state(task, IRDA_TASK_CHILD_WAIT); /* Give reset 1 sec to finish */ ret = msecs_to_jiffies(1000); } break; case IRDA_TASK_CHILD_WAIT: IRDA_WARNING("%s(), resetting dongle timed out!\n", __FUNCTION__); ret = -1; break; case IRDA_TASK_CHILD_DONE: /* Clear DTR and set RTS to enter command mode */ self->set_dtr_rts(self->dev, FALSE, TRUE); switch (speed) { case 9600: default: control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f); control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f); break; case 19200: control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f); control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f); break; case 38400: control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f); control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f); break; case 57600: control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f); control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f); break; case 115200: control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f); control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f); break; } control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE; /* Write control bytes */ self->write(self->dev, control, 3); irda_task_next_state(task, IRDA_TASK_WAIT); ret = msecs_to_jiffies(5); break; case IRDA_TASK_WAIT: /* Go back to normal mode */ self->set_dtr_rts(self->dev, TRUE, TRUE); irda_task_next_state(task, IRDA_TASK_DONE); self->speed_task = NULL; break; default: IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, task->state); irda_task_next_state(task, IRDA_TASK_DONE); self->speed_task = NULL; ret = -1; break; } return ret; } /* * Function act200l_reset (driver) * * Reset the ACTiSYS ACT-IR200L type dongle. */ static int act200l_reset(struct irda_task *task) { dongle_t *self = (dongle_t *) task->instance; __u8 control[9] = { ACT200L_REG15, ACT200L_REG13 | ACT200L_SHDW, ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL, ACT200L_REG13, ACT200L_REG7 | ACT200L_ENPOS, ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1, ACT200L_REG5 | ACT200L_RWIDL, ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR, ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN }; int ret = 0; IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); self->reset_task = task; switch (task->state) { case IRDA_TASK_INIT: /* Power on the dongle */ self->set_dtr_rts(self->dev, TRUE, TRUE); irda_task_next_state(task, IRDA_TASK_WAIT1); ret = msecs_to_jiffies(50); break; case IRDA_TASK_WAIT1: /* Reset the dongle : set RTS low for 25 ms */ self->set_dtr_rts(self->dev, TRUE, FALSE); irda_task_next_state(task, IRDA_TASK_WAIT2); ret = msecs_to_jiffies(50); break; case IRDA_TASK_WAIT2: /* Clear DTR and set RTS to enter command mode */ self->set_dtr_rts(self->dev, FALSE, TRUE); /* Write control bytes */ self->write(self->dev, control, 9); irda_task_next_state(task, IRDA_TASK_WAIT3); ret = msecs_to_jiffies(15); break; case IRDA_TASK_WAIT3: /* Go back to normal mode */ self->set_dtr_rts(self->dev, TRUE, TRUE); irda_task_next_state(task, IRDA_TASK_DONE); self->reset_task = NULL; break; default: IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, task->state); irda_task_next_state(task, IRDA_TASK_DONE); self->reset_task = NULL; ret = -1; break; } return ret; } MODULE_AUTHOR("SHIMIZU Takuya "); MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */ /* * Function init_module (void) * * Initialize ACTiSYS ACT-IR200L module * */ module_init(act200l_init); /* * Function cleanup_module (void) * * Cleanup ACTiSYS ACT-IR200L module * */ module_exit(act200l_cleanup);