// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2017 NXP * * CORTINA is a registered trademark of Cortina Systems, Inc. * */ #include #include #define PHY_ID_CS4340 0x13e51002 #define VILLA_GLOBAL_CHIP_ID_LSB 0x0 #define VILLA_GLOBAL_CHIP_ID_MSB 0x1 #define VILLA_GLOBAL_GPIO_1_INTS 0x017 static int cortina_read_reg(struct phy_device *phydev, u16 regnum) { return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, MII_ADDR_C45 | regnum); } static int cortina_read_status(struct phy_device *phydev) { int gpio_int_status, ret = 0; gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS); if (gpio_int_status < 0) { ret = gpio_int_status; goto err; } if (gpio_int_status & 0x8) { /* up when edc_convergedS set */ phydev->speed = SPEED_10000; phydev->duplex = DUPLEX_FULL; phydev->link = 1; } else { phydev->link = 0; } err: return ret; } static int cortina_probe(struct phy_device *phydev) { u32 phy_id = 0; int id_lsb = 0, id_msb = 0; /* Read device id from phy registers. */ id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB); if (id_lsb < 0) return -ENXIO; phy_id = id_lsb << 16; id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB); if (id_msb < 0) return -ENXIO; phy_id |= id_msb; /* Make sure the device tree binding matched the driver with the * right device. */ if (phy_id != phydev->drv->phy_id) { phydev_err(phydev, "Error matching phy with %s driver\n", phydev->drv->name); return -ENODEV; } return 0; } static struct phy_driver cortina_driver[] = { { .phy_id = PHY_ID_CS4340, .phy_id_mask = 0xffffffff, .name = "Cortina CS4340", .features = PHY_10GBIT_FEATURES, .config_aneg = gen10g_config_aneg, .read_status = cortina_read_status, .soft_reset = genphy_no_soft_reset, .probe = cortina_probe, }, }; module_phy_driver(cortina_driver); static struct mdio_device_id __maybe_unused cortina_tbl[] = { { PHY_ID_CS4340, 0xffffffff}, {}, }; MODULE_DEVICE_TABLE(mdio, cortina_tbl); MODULE_DESCRIPTION("Cortina EDC CDR 10G Ethernet PHY driver"); MODULE_AUTHOR("NXP"); MODULE_LICENSE("GPL");