/* * cycx_drv.c Cyclom 2X Support Module. * * This module is a library of common hardware specific * functions used by the Cyclades Cyclom 2X sync card. * * Author: Arnaldo Carvalho de Melo * * Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo * * Based on sdladrv.c by Gene Kozin * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * ============================================================================ * 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code * cleanup * 1999/11/08 acme init_cyc2x deleted, doing nothing * 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and * fromio to use dpmbase ioremaped * 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to * & fromio * 1999/10/23 acme cleanup to only supports cyclom2x: all the other * boards are no longer manufactured by cyclades, * if someone wants to support them... be my guest! * 1999/05/28 acme cycx_intack & cycx_intde gone for good * 1999/05/18 acme lots of unlogged work, submitting to Linus... * 1999/01/03 acme more judicious use of data types * 1999/01/03 acme judicious use of data types :> * cycx_inten trying to reset pending interrupts * from cyclom 2x - I think this isn't the way to * go, but for now... * 1999/01/02 acme cycx_intack ok, I think there's nothing to do * to ack an int in cycx_drv.c, only handle it in * cyx_isr (or in the other protocols: cyp_isr, * cyf_isr, when they get implemented. * Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing * fingers to see x25_configure in cycx_x25.c * work... :) * Dec 26, 1998 acme load implementation fixed, seems to work! :) * cycx_2x_dpmbase_options with all the possible * DPM addresses (20). * cycx_intr implemented (test this!) * general code cleanup * Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation. * Aug 8, 1998 acme Initial version. */ #include /* __init */ #include #include /* printk(), and other useful stuff */ #include /* offsetof(), etc. */ #include /* return codes */ #include /* API definitions */ #include /* CYCX firmware module definitions */ #include /* udelay, msleep_interruptible */ #include /* read[wl], write[wl], ioremap, iounmap */ #define MOD_VERSION 0 #define MOD_RELEASE 6 MODULE_AUTHOR("Arnaldo Carvalho de Melo"); MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver"); MODULE_LICENSE("GPL"); /* Hardware-specific functions */ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len); static void cycx_bootcfg(struct cycx_hw *hw); static int reset_cyc2x(void __iomem *addr); static int detect_cyc2x(void __iomem *addr); /* Miscellaneous functions */ static int get_option_index(long *optlist, long optval); static u16 checksum(u8 *buf, u32 len); #define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET) /* Global Data */ /* private data */ static char modname[] = "cycx_drv"; static char fullname[] = "Cyclom 2X Support Module"; static char copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " ""; /* Hardware configuration options. * These are arrays of configuration options used by verification routines. * The first element of each array is its size (i.e. number of options). */ static long cyc2x_dpmbase_options[] = { 20, 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000, 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000, 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000 }; static long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; /* Kernel Loadable Module Entry Points */ /* Module 'insert' entry point. * o print announcement * o initialize static data * * Return: 0 Ok * < 0 error. * Context: process */ static int __init cycx_drv_init(void) { printk(KERN_INFO "%s v%u.%u %s\n", fullname, MOD_VERSION, MOD_RELEASE, copyright); return 0; } /* Module 'remove' entry point. * o release all remaining system resources */ static void cycx_drv_cleanup(void) { } /* Kernel APIs */ /* Set up adapter. * o detect adapter type * o verify hardware configuration options * o check for hardware conflicts * o set up adapter shared memory * o test adapter memory * o load firmware * Return: 0 ok. * < 0 error */ EXPORT_SYMBOL(cycx_setup); int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) { int err; /* Verify IRQ configuration options */ if (!get_option_index(cycx_2x_irq_options, hw->irq)) { printk(KERN_ERR "%s: IRQ %d is invalid!\n", modname, hw->irq); return -EINVAL; } /* Setup adapter dual-port memory window and test memory */ if (!dpmbase) { printk(KERN_ERR "%s: you must specify the dpm address!\n", modname); return -EINVAL; } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) { printk(KERN_ERR "%s: memory address 0x%lX is invalid!\n", modname, dpmbase); return -EINVAL; } hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE); hw->dpmsize = CYCX_WINDOWSIZE; if (!detect_cyc2x(hw->dpmbase)) { printk(KERN_ERR "%s: adapter Cyclom 2X not found at " "address 0x%lX!\n", modname, dpmbase); return -EINVAL; } printk(KERN_INFO "%s: found Cyclom 2X card at address 0x%lX.\n", modname, dpmbase); /* Load firmware. If loader fails then shut down adapter */ err = load_cyc2x(hw, cfm, len); if (err) cycx_down(hw); /* shutdown adapter */ return err; } EXPORT_SYMBOL(cycx_down); int cycx_down(struct cycx_hw *hw) { iounmap(hw->dpmbase); return 0; } /* Enable interrupt generation. */ static void cycx_inten(struct cycx_hw *hw) { writeb(0, hw->dpmbase); } /* Generate an interrupt to adapter's CPU. */ EXPORT_SYMBOL(cycx_intr); void cycx_intr(struct cycx_hw *hw) { writew(0, hw->dpmbase + GEN_CYCX_INTR); } /* Execute Adapter Command. * o Set exec flag. * o Busy-wait until flag is reset. */ EXPORT_SYMBOL(cycx_exec); int cycx_exec(void __iomem *addr) { u16 i = 0; /* wait till addr content is zeroed */ while (readw(addr)) { udelay(1000); if (++i > 50) return -1; } return 0; } /* Read absolute adapter memory. * Transfer data from adapter's memory to data buffer. */ EXPORT_SYMBOL(cycx_peek); int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len) { if (len == 1) *(u8*)buf = readb(hw->dpmbase + addr); else memcpy_fromio(buf, hw->dpmbase + addr, len); return 0; } /* Write Absolute Adapter Memory. * Transfer data from data buffer to adapter's memory. */ EXPORT_SYMBOL(cycx_poke); int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len) { if (len == 1) writeb(*(u8*)buf, hw->dpmbase + addr); else memcpy_toio(hw->dpmbase + addr, buf, len); return 0; } /* Hardware-Specific Functions */ /* Load Aux Routines */ /* Reset board hardware. return 1 if memory exists at addr and 0 if not. */ static int memory_exists(void __iomem *addr) { int tries = 0; for (; tries < 3 ; tries++) { writew(TEST_PATTERN, addr + 0x10); if (readw(addr + 0x10) == TEST_PATTERN) if (readw(addr + 0x10) == TEST_PATTERN) return 1; msleep_interruptible(1 * 1000); } return 0; } /* Load reset code. */ static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt) { void __iomem *pt_code = addr + RESET_OFFSET; u16 i; /*, j; */ for (i = 0 ; i < cnt ; i++) { /* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */ writeb(*buffer++, pt_code++); } } /* Load buffer using boot interface. * o copy data from buffer to Cyclom-X memory * o wait for reset code to copy it to right portion of memory */ static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt) { memcpy_toio(addr + DATA_OFFSET, buffer, cnt); writew(GEN_BOOT_DAT, addr + CMD_OFFSET); return wait_cyc(addr); } /* Set up entry point and kick start Cyclom-X CPU. */ static void cycx_start(void __iomem *addr) { /* put in 0x30 offset the jump instruction to the code entry point */ writeb(0xea, addr + 0x30); writeb(0x00, addr + 0x31); writeb(0xc4, addr + 0x32); writeb(0x00, addr + 0x33); writeb(0x00, addr + 0x34); /* cmd to start executing code */ writew(GEN_START, addr + CMD_OFFSET); } /* Load and boot reset code. */ static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len) { void __iomem *pt_start = addr + START_OFFSET; writeb(0xea, pt_start++); /* jmp to f000:3f00 */ writeb(0x00, pt_start++); writeb(0xfc, pt_start++); writeb(0x00, pt_start++); writeb(0xf0, pt_start); reset_load(addr, code, len); /* 80186 was in hold, go */ writeb(0, addr + START_CPU); msleep_interruptible(1 * 1000); } /* Load data.bin file through boot (reset) interface. */ static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) { void __iomem *pt_boot_cmd = addr + CMD_OFFSET; u32 i; /* boot buffer length */ writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); writew(GEN_DEFPAR, pt_boot_cmd); if (wait_cyc(addr) < 0) return -1; writew(0, pt_boot_cmd + sizeof(u16)); writew(0x4000, pt_boot_cmd + 2 * sizeof(u16)); writew(GEN_SET_SEG, pt_boot_cmd); if (wait_cyc(addr) < 0) return -1; for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) if (buffer_load(addr, code + i, min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) { printk(KERN_ERR "%s: Error !!\n", modname); return -1; } return 0; } /* Load code.bin file through boot (reset) interface. */ static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) { void __iomem *pt_boot_cmd = addr + CMD_OFFSET; u32 i; /* boot buffer length */ writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); writew(GEN_DEFPAR, pt_boot_cmd); if (wait_cyc(addr) < 0) return -1; writew(0x0000, pt_boot_cmd + sizeof(u16)); writew(0xc400, pt_boot_cmd + 2 * sizeof(u16)); writew(GEN_SET_SEG, pt_boot_cmd); if (wait_cyc(addr) < 0) return -1; for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) if (buffer_load(addr, code + i, min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) { printk(KERN_ERR "%s: Error !!\n", modname); return -1; } return 0; } /* Load adapter from the memory image of the CYCX firmware module. * o verify firmware integrity and compatibility * o start adapter up */ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) { int i, j; struct cycx_fw_header *img_hdr; u8 *reset_image, *data_image, *code_image; void __iomem *pt_cycld = hw->dpmbase + 0x400; u16 cksum; /* Announce */ printk(KERN_INFO "%s: firmware signature=\"%s\"\n", modname, cfm->signature); /* Verify firmware signature */ if (strcmp(cfm->signature, CFM_SIGNATURE)) { printk(KERN_ERR "%s:load_cyc2x: not Cyclom-2X firmware!\n", modname); return -EINVAL; } printk(KERN_INFO "%s: firmware version=%u\n", modname, cfm->version); /* Verify firmware module format version */ if (cfm->version != CFM_VERSION) { printk(KERN_ERR "%s:%s: firmware format %u rejected! " "Expecting %u.\n", modname, __func__, cfm->version, CFM_VERSION); return -EINVAL; } /* Verify firmware module length and checksum */ cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) + cfm->info.codesize); /* FIXME cfm->info.codesize is off by 2 if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) || */ if (cksum != cfm->checksum) { printk(KERN_ERR "%s:%s: firmware corrupted!\n", modname, __func__); printk(KERN_ERR " cdsize = 0x%x (expected 0x%lx)\n", len - (int)sizeof(struct cycx_firmware) - 1, cfm->info.codesize); printk(KERN_ERR " chksum = 0x%x (expected 0x%x)\n", cksum, cfm->checksum); return -EINVAL; } /* If everything is ok, set reset, data and code pointers */ img_hdr = (struct cycx_fw_header *)&cfm->image; #ifdef FIRMWARE_DEBUG printk(KERN_INFO "%s:%s: image sizes\n", __func__, modname); printk(KERN_INFO " reset=%lu\n", img_hdr->reset_size); printk(KERN_INFO " data=%lu\n", img_hdr->data_size); printk(KERN_INFO " code=%lu\n", img_hdr->code_size); #endif reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header); data_image = reset_image + img_hdr->reset_size; code_image = data_image + img_hdr->data_size; /*---- Start load ----*/ /* Announce */ printk(KERN_INFO "%s: loading firmware %s (ID=%u)...\n", modname, cfm->descr[0] ? cfm->descr : "unknown firmware", cfm->info.codeid); for (i = 0 ; i < 5 ; i++) { /* Reset Cyclom hardware */ if (!reset_cyc2x(hw->dpmbase)) { printk(KERN_ERR "%s: dpm problem or board not found\n", modname); return -EINVAL; } /* Load reset.bin */ cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size); /* reset is waiting for boot */ writew(GEN_POWER_ON, pt_cycld); msleep_interruptible(1 * 1000); for (j = 0 ; j < 3 ; j++) if (!readw(pt_cycld)) goto reset_loaded; else msleep_interruptible(1 * 1000); } printk(KERN_ERR "%s: reset not started.\n", modname); return -EINVAL; reset_loaded: /* Load data.bin */ if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) { printk(KERN_ERR "%s: cannot load data file.\n", modname); return -EINVAL; } /* Load code.bin */ if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) { printk(KERN_ERR "%s: cannot load code file.\n", modname); return -EINVAL; } /* Prepare boot-time configuration data */ cycx_bootcfg(hw); /* kick-off CPU */ cycx_start(hw->dpmbase); /* Arthur Ganzert's tip: wait a while after the firmware loading... seg abr 26 17:17:12 EST 1999 - acme */ msleep_interruptible(7 * 1000); printk(KERN_INFO "%s: firmware loaded!\n", modname); /* enable interrupts */ cycx_inten(hw); return 0; } /* Prepare boot-time firmware configuration data. * o initialize configuration data area From async.doc - V_3.4.0 - 07/18/1994 - As of now, only static buffers are available to the user. So, the bit VD_RXDIRC must be set in 'valid'. That means that user wants to use the static transmission and reception buffers. */ static void cycx_bootcfg(struct cycx_hw *hw) { /* use fixed buffers */ writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET); } /* Detect Cyclom 2x adapter. * Following tests are used to detect Cyclom 2x adapter: * to be completed based on the tests done below * Return 1 if detected o.k. or 0 if failed. * Note: This test is destructive! Adapter will be left in shutdown * state after the test. */ static int detect_cyc2x(void __iomem *addr) { reset_cyc2x(addr); return memory_exists(addr); } /* Miscellaneous */ /* Get option's index into the options list. * Return option's index (1 .. N) or zero if option is invalid. */ static int get_option_index(long *optlist, long optval) { int i = 1; for (; i <= optlist[0]; ++i) if (optlist[i] == optval) return i; return 0; } /* Reset adapter's CPU. */ static int reset_cyc2x(void __iomem *addr) { writeb(0, addr + RST_ENABLE); msleep_interruptible(2 * 1000); writeb(0, addr + RST_DISABLE); msleep_interruptible(2 * 1000); return memory_exists(addr); } /* Calculate 16-bit CRC using CCITT polynomial. */ static u16 checksum(u8 *buf, u32 len) { u16 crc = 0; u16 mask, flag; for (; len; --len, ++buf) for (mask = 0x80; mask; mask >>= 1) { flag = (crc & 0x8000); crc <<= 1; crc |= ((*buf & mask) ? 1 : 0); if (flag) crc ^= 0x1021; } return crc; } module_init(cycx_drv_init); module_exit(cycx_drv_cleanup); /* End */