/* * Copyright (c) 2010 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ /**************** * Common types * */ #ifndef _BRCMF_H_ #define _BRCMF_H_ #define BRCMF_VERSION_STR "4.218.248.5" #include "fweh.h" /******************************************************************************* * IO codes that are interpreted by dongle firmware ******************************************************************************/ #define BRCMF_C_UP 2 #define BRCMF_C_DOWN 3 #define BRCMF_C_SET_PROMISC 10 #define BRCMF_C_GET_RATE 12 #define BRCMF_C_GET_INFRA 19 #define BRCMF_C_SET_INFRA 20 #define BRCMF_C_GET_AUTH 21 #define BRCMF_C_SET_AUTH 22 #define BRCMF_C_GET_BSSID 23 #define BRCMF_C_GET_SSID 25 #define BRCMF_C_SET_SSID 26 #define BRCMF_C_TERMINATED 28 #define BRCMF_C_GET_CHANNEL 29 #define BRCMF_C_SET_CHANNEL 30 #define BRCMF_C_GET_SRL 31 #define BRCMF_C_SET_SRL 32 #define BRCMF_C_GET_LRL 33 #define BRCMF_C_SET_LRL 34 #define BRCMF_C_GET_RADIO 37 #define BRCMF_C_SET_RADIO 38 #define BRCMF_C_GET_PHYTYPE 39 #define BRCMF_C_SET_KEY 45 #define BRCMF_C_SET_PASSIVE_SCAN 49 #define BRCMF_C_SCAN 50 #define BRCMF_C_SCAN_RESULTS 51 #define BRCMF_C_DISASSOC 52 #define BRCMF_C_REASSOC 53 #define BRCMF_C_SET_ROAM_TRIGGER 55 #define BRCMF_C_SET_ROAM_DELTA 57 #define BRCMF_C_GET_BCNPRD 75 #define BRCMF_C_SET_BCNPRD 76 #define BRCMF_C_GET_DTIMPRD 77 #define BRCMF_C_SET_DTIMPRD 78 #define BRCMF_C_SET_COUNTRY 84 #define BRCMF_C_GET_PM 85 #define BRCMF_C_SET_PM 86 #define BRCMF_C_GET_CURR_RATESET 114 #define BRCMF_C_GET_AP 117 #define BRCMF_C_SET_AP 118 #define BRCMF_C_GET_RSSI 127 #define BRCMF_C_GET_WSEC 133 #define BRCMF_C_SET_WSEC 134 #define BRCMF_C_GET_PHY_NOISE 135 #define BRCMF_C_GET_BSS_INFO 136 #define BRCMF_C_SET_SCB_TIMEOUT 158 #define BRCMF_C_GET_PHYLIST 180 #define BRCMF_C_SET_SCAN_CHANNEL_TIME 185 #define BRCMF_C_SET_SCAN_UNASSOC_TIME 187 #define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201 #define BRCMF_C_GET_VALID_CHANNELS 217 #define BRCMF_C_GET_KEY_PRIMARY 235 #define BRCMF_C_SET_KEY_PRIMARY 236 #define BRCMF_C_SET_SCAN_PASSIVE_TIME 258 #define BRCMF_C_GET_VAR 262 #define BRCMF_C_SET_VAR 263 /* phy types (returned by WLC_GET_PHYTPE) */ #define WLC_PHY_TYPE_A 0 #define WLC_PHY_TYPE_B 1 #define WLC_PHY_TYPE_G 2 #define WLC_PHY_TYPE_N 4 #define WLC_PHY_TYPE_LP 5 #define WLC_PHY_TYPE_SSN 6 #define WLC_PHY_TYPE_HT 7 #define WLC_PHY_TYPE_LCN 8 #define WLC_PHY_TYPE_NULL 0xf #define BRCMF_EVENTING_MASK_LEN 16 #define TOE_TX_CSUM_OL 0x00000001 #define TOE_RX_CSUM_OL 0x00000002 #define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */ /* size of brcmf_scan_params not including variable length array */ #define BRCMF_SCAN_PARAMS_FIXED_SIZE 64 /* masks for channel and ssid count */ #define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff #define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16 /* primary (ie tx) key */ #define BRCMF_PRIMARY_KEY (1 << 1) /* For supporting multiple interfaces */ #define BRCMF_MAX_IFS 16 #define DOT11_BSSTYPE_ANY 2 #define DOT11_MAX_DEFAULT_KEYS 4 #define BRCMF_ESCAN_REQ_VERSION 1 #define WLC_BSS_RSSI_ON_CHANNEL 0x0002 #define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */ #define BRCMF_STA_ASSOC 0x10 /* Associated */ #define BRCMF_E_STATUS_SUCCESS 0 #define BRCMF_E_STATUS_FAIL 1 #define BRCMF_E_STATUS_TIMEOUT 2 #define BRCMF_E_STATUS_NO_NETWORKS 3 #define BRCMF_E_STATUS_ABORT 4 #define BRCMF_E_STATUS_NO_ACK 5 #define BRCMF_E_STATUS_UNSOLICITED 6 #define BRCMF_E_STATUS_ATTEMPT 7 #define BRCMF_E_STATUS_PARTIAL 8 #define BRCMF_E_STATUS_NEWSCAN 9 #define BRCMF_E_STATUS_NEWASSOC 10 #define BRCMF_E_STATUS_11HQUIET 11 #define BRCMF_E_STATUS_SUPPRESS 12 #define BRCMF_E_STATUS_NOCHANS 13 #define BRCMF_E_STATUS_CS_ABORT 15 #define BRCMF_E_STATUS_ERROR 16 #define BRCMF_E_REASON_INITIAL_ASSOC 0 #define BRCMF_E_REASON_LOW_RSSI 1 #define BRCMF_E_REASON_DEAUTH 2 #define BRCMF_E_REASON_DISASSOC 3 #define BRCMF_E_REASON_BCNS_LOST 4 #define BRCMF_E_REASON_MINTXRATE 9 #define BRCMF_E_REASON_TXFAIL 10 #define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 #define BRCMF_E_REASON_FAST_ROAM_FAILED 5 #define BRCMF_E_REASON_DIRECTED_ROAM 6 #define BRCMF_E_REASON_TSPEC_REJECTED 7 #define BRCMF_E_REASON_BETTER_AP 8 #define BRCMF_E_PRUNE_ENCR_MISMATCH 1 #define BRCMF_E_PRUNE_BCAST_BSSID 2 #define BRCMF_E_PRUNE_MAC_DENY 3 #define BRCMF_E_PRUNE_MAC_NA 4 #define BRCMF_E_PRUNE_REG_PASSV 5 #define BRCMF_E_PRUNE_SPCT_MGMT 6 #define BRCMF_E_PRUNE_RADAR 7 #define BRCMF_E_RSN_MISMATCH 8 #define BRCMF_E_PRUNE_NO_COMMON_RATES 9 #define BRCMF_E_PRUNE_BASIC_RATES 10 #define BRCMF_E_PRUNE_CIPHER_NA 12 #define BRCMF_E_PRUNE_KNOWN_STA 13 #define BRCMF_E_PRUNE_WDS_PEER 15 #define BRCMF_E_PRUNE_QBSS_LOAD 16 #define BRCMF_E_PRUNE_HOME_AP 17 #define BRCMF_E_SUP_OTHER 0 #define BRCMF_E_SUP_DECRYPT_KEY_DATA 1 #define BRCMF_E_SUP_BAD_UCAST_WEP128 2 #define BRCMF_E_SUP_BAD_UCAST_WEP40 3 #define BRCMF_E_SUP_UNSUP_KEY_LEN 4 #define BRCMF_E_SUP_PW_KEY_CIPHER 5 #define BRCMF_E_SUP_MSG3_TOO_MANY_IE 6 #define BRCMF_E_SUP_MSG3_IE_MISMATCH 7 #define BRCMF_E_SUP_NO_INSTALL_FLAG 8 #define BRCMF_E_SUP_MSG3_NO_GTK 9 #define BRCMF_E_SUP_GRP_KEY_CIPHER 10 #define BRCMF_E_SUP_GRP_MSG1_NO_GTK 11 #define BRCMF_E_SUP_GTK_DECRYPT_FAIL 12 #define BRCMF_E_SUP_SEND_FAIL 13 #define BRCMF_E_SUP_DEAUTH 14 #define BRCMF_E_IF_ADD 1 #define BRCMF_E_IF_DEL 2 #define BRCMF_E_IF_CHANGE 3 #define BRCMF_E_IF_ROLE_STA 0 #define BRCMF_E_IF_ROLE_AP 1 #define BRCMF_E_IF_ROLE_WDS 2 #define BRCMF_E_LINK_BCN_LOSS 1 #define BRCMF_E_LINK_DISASSOC 2 #define BRCMF_E_LINK_ASSOC_REC 3 #define BRCMF_E_LINK_BSSCFG_DIS 4 /* Small, medium and maximum buffer size for dcmd */ #define BRCMF_DCMD_SMLEN 256 #define BRCMF_DCMD_MEDLEN 1536 #define BRCMF_DCMD_MAXLEN 8192 /* Pattern matching filter. Specifies an offset within received packets to * start matching, the pattern to match, the size of the pattern, and a bitmask * that indicates which bits within the pattern should be matched. */ struct brcmf_pkt_filter_pattern_le { /* * Offset within received packet to start pattern matching. * Offset '0' is the first byte of the ethernet header. */ __le32 offset; /* Size of the pattern. Bitmask must be the same size.*/ __le32 size_bytes; /* * Variable length mask and pattern data. mask starts at offset 0. * Pattern immediately follows mask. */ u8 mask_and_pattern[1]; }; /* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */ struct brcmf_pkt_filter_le { __le32 id; /* Unique filter id, specified by app. */ __le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */ __le32 negate_match; /* Negate the result of filter matches */ union { /* Filter definitions */ struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */ } u; }; /* IOVAR "pkt_filter_enable" parameter. */ struct brcmf_pkt_filter_enable_le { __le32 id; /* Unique filter id */ __le32 enable; /* Enable/disable bool */ }; /* BSS info structure * Applications MUST CHECK ie_offset field and length field to access IEs and * next bss_info structure in a vector (in struct brcmf_scan_results) */ struct brcmf_bss_info_le { __le32 version; /* version field */ __le32 length; /* byte length of data in this record, * starting at version and including IEs */ u8 BSSID[ETH_ALEN]; __le16 beacon_period; /* units are Kusec */ __le16 capability; /* Capability information */ u8 SSID_len; u8 SSID[32]; struct { __le32 count; /* # rates in this set */ u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */ } rateset; /* supported rates */ __le16 chanspec; /* chanspec for bss */ __le16 atim_window; /* units are Kusec */ u8 dtim_period; /* DTIM period */ __le16 RSSI; /* receive signal strength (in dBm) */ s8 phy_noise; /* noise (in dBm) */ u8 n_cap; /* BSS is 802.11N Capable */ /* 802.11N BSS Capabilities (based on HT_CAP_*): */ __le32 nbss_cap; u8 ctl_ch; /* 802.11N BSS control channel number */ __le32 reserved32[1]; /* Reserved for expansion of BSS properties */ u8 flags; /* flags */ u8 reserved[3]; /* Reserved for expansion of BSS properties */ u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */ __le16 ie_offset; /* offset at which IEs start, from beginning */ __le32 ie_length; /* byte length of Information Elements */ __le16 SNR; /* average SNR of during frame reception */ /* Add new fields here */ /* variable length Information Elements */ }; struct brcm_rateset_le { /* # rates in this set */ __le32 count; /* rates in 500kbps units w/hi bit set if basic */ u8 rates[BRCMF_MAXRATES_IN_SET]; }; struct brcmf_ssid { u32 SSID_len; unsigned char SSID[32]; }; struct brcmf_ssid_le { __le32 SSID_len; unsigned char SSID[32]; }; struct brcmf_scan_params_le { struct brcmf_ssid_le ssid_le; /* default: {0, ""} */ u8 bssid[ETH_ALEN]; /* default: bcast */ s8 bss_type; /* default: any, * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */ u8 scan_type; /* flags, 0 use default */ __le32 nprobes; /* -1 use default, number of probes per channel */ __le32 active_time; /* -1 use default, dwell time per channel for * active scanning */ __le32 passive_time; /* -1 use default, dwell time per channel * for passive scanning */ __le32 home_time; /* -1 use default, dwell time for the * home channel between channel scans */ __le32 channel_num; /* count of channels and ssids that follow * * low half is count of channels in * channel_list, 0 means default (use all * available channels) * * high half is entries in struct brcmf_ssid * array that follows channel_list, aligned for * s32 (4 bytes) meaning an odd channel count * implies a 2-byte pad between end of * channel_list and first ssid * * if ssid count is zero, single ssid in the * fixed parameter portion is assumed, otherwise * ssid in the fixed portion is ignored */ __le16 channel_list[1]; /* list of chanspecs */ }; struct brcmf_scan_results { u32 buflen; u32 version; u32 count; struct brcmf_bss_info_le bss_info_le[]; }; struct brcmf_escan_params_le { __le32 version; __le16 action; __le16 sync_id; struct brcmf_scan_params_le params_le; }; struct brcmf_escan_result_le { __le32 buflen; __le32 version; __le16 sync_id; __le16 bss_count; struct brcmf_bss_info_le bss_info_le; }; #define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \ sizeof(struct brcmf_bss_info_le)) /* used for association with a specific BSSID and chanspec list */ struct brcmf_assoc_params_le { /* 00:00:00:00:00:00: broadcast scan */ u8 bssid[ETH_ALEN]; /* 0: all available channels, otherwise count of chanspecs in * chanspec_list */ __le32 chanspec_num; /* list of chanspecs */ __le16 chanspec_list[1]; }; /* used for join with or without a specific bssid and channel list */ struct brcmf_join_params { struct brcmf_ssid_le ssid_le; struct brcmf_assoc_params_le params_le; }; /* scan params for extended join */ struct brcmf_join_scan_params_le { u8 scan_type; /* 0 use default, active or passive scan */ __le32 nprobes; /* -1 use default, nr of probes per channel */ __le32 active_time; /* -1 use default, dwell time per channel for * active scanning */ __le32 passive_time; /* -1 use default, dwell time per channel * for passive scanning */ __le32 home_time; /* -1 use default, dwell time for the home * channel between channel scans */ }; /* extended join params */ struct brcmf_ext_join_params_le { struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */ struct brcmf_join_scan_params_le scan_le; struct brcmf_assoc_params_le assoc_le; }; struct brcmf_wsec_key { u32 index; /* key index */ u32 len; /* key length */ u8 data[WLAN_MAX_KEY_LEN]; /* key data */ u32 pad_1[18]; u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ u32 flags; /* misc flags */ u32 pad_2[3]; u32 iv_initialized; /* has IV been initialized already? */ u32 pad_3; /* Rx IV */ struct { u32 hi; /* upper 32 bits of IV */ u16 lo; /* lower 16 bits of IV */ } rxiv; u32 pad_4[2]; u8 ea[ETH_ALEN]; /* per station */ }; /* * dongle requires same struct as above but with fields in little endian order */ struct brcmf_wsec_key_le { __le32 index; /* key index */ __le32 len; /* key length */ u8 data[WLAN_MAX_KEY_LEN]; /* key data */ __le32 pad_1[18]; __le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */ __le32 flags; /* misc flags */ __le32 pad_2[3]; __le32 iv_initialized; /* has IV been initialized already? */ __le32 pad_3; /* Rx IV */ struct { __le32 hi; /* upper 32 bits of IV */ __le16 lo; /* lower 16 bits of IV */ } rxiv; __le32 pad_4[2]; u8 ea[ETH_ALEN]; /* per station */ }; /* Used to get specific STA parameters */ struct brcmf_scb_val_le { __le32 val; u8 ea[ETH_ALEN]; }; /* channel encoding */ struct brcmf_channel_info_le { __le32 hw_channel; __le32 target_channel; __le32 scan_channel; }; struct brcmf_sta_info_le { __le16 ver; /* version of this struct */ __le16 len; /* length in bytes of this structure */ __le16 cap; /* sta's advertised capabilities */ __le32 flags; /* flags defined below */ __le32 idle; /* time since data pkt rx'd from sta */ u8 ea[ETH_ALEN]; /* Station address */ __le32 count; /* # rates in this set */ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */ /* w/hi bit set if basic */ __le32 in; /* seconds elapsed since associated */ __le32 listen_interval_inms; /* Min Listen interval in ms for STA */ __le32 tx_pkts; /* # of packets transmitted */ __le32 tx_failures; /* # of packets failed */ __le32 rx_ucast_pkts; /* # of unicast packets received */ __le32 rx_mcast_pkts; /* # of multicast packets received */ __le32 tx_rate; /* Rate of last successful tx frame */ __le32 rx_rate; /* Rate of last successful rx frame */ __le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */ __le32 rx_decrypt_failures; /* # of packet decrypted failed */ }; /* * WLC_E_PROBRESP_MSG * WLC_E_P2P_PROBREQ_MSG * WLC_E_ACTION_FRAME_RX */ struct brcmf_rx_mgmt_data { __be16 version; __be16 chanspec; __be32 rssi; __be32 mactime; __be32 rate; }; /* Bus independent dongle command */ struct brcmf_dcmd { uint cmd; /* common dongle cmd definition */ void *buf; /* pointer to user buffer */ uint len; /* length of user buffer */ u8 set; /* get or set request (optional) */ uint used; /* bytes read or written (optional) */ uint needed; /* bytes needed (optional) */ }; /* Forward decls for struct brcmf_pub (see below) */ struct brcmf_proto; /* device communication protocol info */ struct brcmf_cfg80211_dev; /* cfg80211 device info */ struct brcmf_fws_info; /* firmware signalling info */ /* Common structure for module and instance linkage */ struct brcmf_pub { /* Linkage ponters */ struct brcmf_bus *bus_if; struct brcmf_proto *prot; struct brcmf_cfg80211_info *config; /* Internal brcmf items */ uint hdrlen; /* Total BRCMF header length (proto + bus) */ uint rxsz; /* Rx buffer size bus module should use */ u8 wme_dp; /* wme discard priority */ /* Dongle media info */ unsigned long drv_version; /* Version of dongle-resident driver */ u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */ /* Multicast data packets sent to dongle */ unsigned long tx_multicast; struct brcmf_if *iflist[BRCMF_MAX_IFS]; struct mutex proto_block; unsigned char proto_buf[BRCMF_DCMD_MAXLEN]; struct brcmf_fweh_info fweh; bool fw_signals; struct brcmf_fws_info *fws; spinlock_t fws_spinlock; #ifdef DEBUG struct dentry *dbgfs_dir; #endif }; struct brcmf_if_event { u8 ifidx; u8 action; u8 flags; u8 bssidx; }; /* forward declaration */ struct brcmf_cfg80211_vif; /** * struct brcmf_if - interface control information. * * @drvr: points to device related information. * @vif: points to cfg80211 specific interface information. * @ndev: associated network device. * @stats: interface specific network statistics. * @ifidx: interface index in device firmware. * @bssidx: index of bss associated with this interface. * @mac_addr: assigned mac address. * @pend_8021x_cnt: tracks outstanding number of 802.1x frames. * @pend_8021x_wait: used for signalling change in count. */ struct brcmf_if { struct brcmf_pub *drvr; struct brcmf_cfg80211_vif *vif; struct net_device *ndev; struct net_device_stats stats; struct work_struct setmacaddr_work; struct work_struct multicast_work; int ifidx; s32 bssidx; u8 mac_addr[ETH_ALEN]; atomic_t pend_8021x_cnt; wait_queue_head_t pend_8021x_wait; }; extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); /* Return pointer to interface name */ extern char *brcmf_ifname(struct brcmf_pub *drvr, int idx); /* Query dongle */ extern int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, uint len); extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, uint len); /* Remove any protocol-specific data header. */ extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws, u8 *ifidx, struct sk_buff *rxp); extern int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bssidx, s32 ifidx, char *name, u8 *mac_addr); extern void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx); extern u32 brcmf_get_chip_info(struct brcmf_if *ifp); #endif /* _BRCMF_H_ */