/* * Copyright (c) 2010 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _BRCMF_DBG_H_ #define _BRCMF_DBG_H_ /* message levels */ #define BRCMF_ERROR_VAL 0x0001 #define BRCMF_TRACE_VAL 0x0002 #define BRCMF_INFO_VAL 0x0004 #define BRCMF_DATA_VAL 0x0008 #define BRCMF_CTL_VAL 0x0010 #define BRCMF_TIMER_VAL 0x0020 #define BRCMF_HDRS_VAL 0x0040 #define BRCMF_BYTES_VAL 0x0080 #define BRCMF_INTR_VAL 0x0100 #define BRCMF_GLOM_VAL 0x0400 #define BRCMF_EVENT_VAL 0x0800 #define BRCMF_BTA_VAL 0x1000 #define BRCMF_ISCAN_VAL 0x2000 #define BRCMF_FIL_VAL 0x4000 #if defined(DEBUG) #define brcmf_dbg(level, fmt, ...) \ do { \ if (BRCMF_ERROR_VAL == BRCMF_##level##_VAL) { \ if (brcmf_msg_level & BRCMF_##level##_VAL) { \ if (net_ratelimit()) \ pr_debug("%s: " fmt, \ __func__, ##__VA_ARGS__); \ } \ } else { \ if (brcmf_msg_level & BRCMF_##level##_VAL) { \ pr_debug("%s: " fmt, \ __func__, ##__VA_ARGS__); \ } \ } \ } while (0) #define BRCMF_DATA_ON() (brcmf_msg_level & BRCMF_DATA_VAL) #define BRCMF_CTL_ON() (brcmf_msg_level & BRCMF_CTL_VAL) #define BRCMF_HDRS_ON() (brcmf_msg_level & BRCMF_HDRS_VAL) #define BRCMF_BYTES_ON() (brcmf_msg_level & BRCMF_BYTES_VAL) #define BRCMF_GLOM_ON() (brcmf_msg_level & BRCMF_GLOM_VAL) #define BRCMF_EVENT_ON() (brcmf_msg_level & BRCMF_EVENT_VAL) #define BRCMF_FIL_ON() (brcmf_msg_level & BRCMF_FIL_VAL) #else /* (defined DEBUG) || (defined DEBUG) */ #define brcmf_dbg(level, fmt, ...) no_printk(fmt, ##__VA_ARGS__) #define BRCMF_DATA_ON() 0 #define BRCMF_CTL_ON() 0 #define BRCMF_HDRS_ON() 0 #define BRCMF_BYTES_ON() 0 #define BRCMF_GLOM_ON() 0 #define BRCMF_EVENT_ON() 0 #define BRCMF_FIL_ON() 0 #endif /* defined(DEBUG) */ #define brcmf_dbg_hex_dump(test, data, len, fmt, ...) \ do { \ if (test) \ brcmu_dbg_hex_dump(data, len, fmt, ##__VA_ARGS__); \ } while (0) extern int brcmf_msg_level; /* * hold counter variables used in brcmfmac sdio driver. */ struct brcmf_sdio_count { uint intrcount; /* Count of device interrupt callbacks */ uint lastintrs; /* Count as of last watchdog timer */ uint pollcnt; /* Count of active polls */ uint regfails; /* Count of R_REG failures */ uint tx_sderrs; /* Count of tx attempts with sd errors */ uint fcqueued; /* Tx packets that got queued */ uint rxrtx; /* Count of rtx requests (NAK to dongle) */ uint rx_toolong; /* Receive frames too long to receive */ uint rxc_errors; /* SDIO errors when reading control frames */ uint rx_hdrfail; /* SDIO errors on header reads */ uint rx_badhdr; /* Bad received headers (roosync?) */ uint rx_badseq; /* Mismatched rx sequence number */ uint fc_rcvd; /* Number of flow-control events received */ uint fc_xoff; /* Number which turned on flow-control */ uint fc_xon; /* Number which turned off flow-control */ uint rxglomfail; /* Failed deglom attempts */ uint rxglomframes; /* Number of glom frames (superframes) */ uint rxglompkts; /* Number of packets from glom frames */ uint f2rxhdrs; /* Number of header reads */ uint f2rxdata; /* Number of frame data reads */ uint f2txdata; /* Number of f2 frame writes */ uint f1regdata; /* Number of f1 register accesses */ uint tickcnt; /* Number of watchdog been schedule */ ulong tx_ctlerrs; /* Err of sending ctrl frames */ ulong tx_ctlpkts; /* Ctrl frames sent to dongle */ ulong rx_ctlerrs; /* Err of processing rx ctrl frames */ ulong rx_ctlpkts; /* Ctrl frames processed from dongle */ ulong rx_readahead_cnt; /* packets where header read-ahead was used */ }; struct brcmf_pub; #ifdef DEBUG void brcmf_debugfs_init(void); void brcmf_debugfs_exit(void); int brcmf_debugfs_attach(struct brcmf_pub *drvr); void brcmf_debugfs_detach(struct brcmf_pub *drvr); struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr); void brcmf_debugfs_create_sdio_count(struct brcmf_pub *drvr, struct brcmf_sdio_count *sdcnt); #else static inline void brcmf_debugfs_init(void) { } static inline void brcmf_debugfs_exit(void) { } static inline int brcmf_debugfs_attach(struct brcmf_pub *drvr) { return 0; } static inline void brcmf_debugfs_detach(struct brcmf_pub *drvr) { } #endif #endif /* _BRCMF_DBG_H_ */