/* * Copyright (c) 2010 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * File contents: support functions for PCI/PCIe */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include "types.h" #include "pub.h" #include "pmu.h" #include "srom.h" #include "nicpci.h" #include "aiutils.h" /* slow_clk_ctl */ /* slow clock source mask */ #define SCC_SS_MASK 0x00000007 /* source of slow clock is LPO */ #define SCC_SS_LPO 0x00000000 /* source of slow clock is crystal */ #define SCC_SS_XTAL 0x00000001 /* source of slow clock is PCI */ #define SCC_SS_PCI 0x00000002 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ #define SCC_LF 0x00000200 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ #define SCC_LP 0x00000400 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ #define SCC_FS 0x00000800 /* IgnorePllOffReq, 1/0: * power logic ignores/honors PLL clock disable requests from core */ #define SCC_IP 0x00001000 /* XtalControlEn, 1/0: * power logic does/doesn't disable crystal when appropriate */ #define SCC_XC 0x00002000 /* XtalPU (RO), 1/0: crystal running/disabled */ #define SCC_XP 0x00004000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ #define SCC_CD_MASK 0xffff0000 #define SCC_CD_SHIFT 16 /* system_clk_ctl */ /* ILPen: Enable Idle Low Power */ #define SYCC_IE 0x00000001 /* ALPen: Enable Active Low Power */ #define SYCC_AE 0x00000002 /* ForcePLLOn */ #define SYCC_FP 0x00000004 /* Force ALP (or HT if ALPen is not set */ #define SYCC_AR 0x00000008 /* Force HT */ #define SYCC_HR 0x00000010 /* ClkDiv (ILP = 1/(4 * (divisor + 1)) */ #define SYCC_CD_MASK 0xffff0000 #define SYCC_CD_SHIFT 16 #define CST4329_SPROM_OTP_SEL_MASK 0x00000003 /* OTP is powered up, use def. CIS, no SPROM */ #define CST4329_DEFCIS_SEL 0 /* OTP is powered up, SPROM is present */ #define CST4329_SPROM_SEL 1 /* OTP is powered up, no SPROM */ #define CST4329_OTP_SEL 2 /* OTP is powered down, SPROM is present */ #define CST4329_OTP_PWRDN 3 #define CST4329_SPI_SDIO_MODE_MASK 0x00000004 #define CST4329_SPI_SDIO_MODE_SHIFT 2 /* 43224 chip-specific ChipControl register bits */ #define CCTRL43224_GPIO_TOGGLE 0x8000 /* 12 mA drive strength */ #define CCTRL_43224A0_12MA_LED_DRIVE 0x00F000F0 /* 12 mA drive strength for later 43224s */ #define CCTRL_43224B0_12MA_LED_DRIVE 0xF0 /* 43236 Chip specific ChipStatus register bits */ #define CST43236_SFLASH_MASK 0x00000040 #define CST43236_OTP_MASK 0x00000080 #define CST43236_HSIC_MASK 0x00000100 /* USB/HSIC */ #define CST43236_BP_CLK 0x00000200 /* 120/96Mbps */ #define CST43236_BOOT_MASK 0x00001800 #define CST43236_BOOT_SHIFT 11 #define CST43236_BOOT_FROM_SRAM 0 /* boot from SRAM, ARM in reset */ #define CST43236_BOOT_FROM_ROM 1 /* boot from ROM */ #define CST43236_BOOT_FROM_FLASH 2 /* boot from FLASH */ #define CST43236_BOOT_FROM_INVALID 3 /* 4331 chip-specific ChipControl register bits */ /* 0 disable */ #define CCTRL4331_BT_COEXIST (1<<0) /* 0 SECI is disabled (JTAG functional) */ #define CCTRL4331_SECI (1<<1) /* 0 disable */ #define CCTRL4331_EXT_LNA (1<<2) /* sprom/gpio13-15 mux */ #define CCTRL4331_SPROM_GPIO13_15 (1<<3) /* 0 ext pa disable, 1 ext pa enabled */ #define CCTRL4331_EXTPA_EN (1<<4) /* set drive out GPIO_CLK on sprom_cs pin */ #define CCTRL4331_GPIOCLK_ON_SPROMCS (1<<5) /* use sprom_cs pin as PCIE mdio interface */ #define CCTRL4331_PCIE_MDIO_ON_SPROMCS (1<<6) /* aband extpa will be at gpio2/5 and sprom_dout */ #define CCTRL4331_EXTPA_ON_GPIO2_5 (1<<7) /* override core control on pipe_AuxClkEnable */ #define CCTRL4331_OVR_PIPEAUXCLKEN (1<<8) /* override core control on pipe_AuxPowerDown */ #define CCTRL4331_OVR_PIPEAUXPWRDOWN (1<<9) /* pcie_auxclkenable */ #define CCTRL4331_PCIE_AUXCLKEN (1<<10) /* pcie_pipe_pllpowerdown */ #define CCTRL4331_PCIE_PIPE_PLLDOWN (1<<11) /* enable bt_shd0 at gpio4 */ #define CCTRL4331_BT_SHD0_ON_GPIO4 (1<<16) /* enable bt_shd1 at gpio5 */ #define CCTRL4331_BT_SHD1_ON_GPIO5 (1<<17) /* 4331 Chip specific ChipStatus register bits */ /* crystal frequency 20/40Mhz */ #define CST4331_XTAL_FREQ 0x00000001 #define CST4331_SPROM_PRESENT 0x00000002 #define CST4331_OTP_PRESENT 0x00000004 #define CST4331_LDO_RF 0x00000008 #define CST4331_LDO_PAR 0x00000010 /* 4319 chip-specific ChipStatus register bits */ #define CST4319_SPI_CPULESSUSB 0x00000001 #define CST4319_SPI_CLK_POL 0x00000002 #define CST4319_SPI_CLK_PH 0x00000008 /* gpio [7:6], SDIO CIS selection */ #define CST4319_SPROM_OTP_SEL_MASK 0x000000c0 #define CST4319_SPROM_OTP_SEL_SHIFT 6 /* use default CIS, OTP is powered up */ #define CST4319_DEFCIS_SEL 0x00000000 /* use SPROM, OTP is powered up */ #define CST4319_SPROM_SEL 0x00000040 /* use OTP, OTP is powered up */ #define CST4319_OTP_SEL 0x00000080 /* use SPROM, OTP is powered down */ #define CST4319_OTP_PWRDN 0x000000c0 /* gpio [8], sdio/usb mode */ #define CST4319_SDIO_USB_MODE 0x00000100 #define CST4319_REMAP_SEL_MASK 0x00000600 #define CST4319_ILPDIV_EN 0x00000800 #define CST4319_XTAL_PD_POL 0x00001000 #define CST4319_LPO_SEL 0x00002000 #define CST4319_RES_INIT_MODE 0x0000c000 /* PALDO is configured with external PNP */ #define CST4319_PALDO_EXTPNP 0x00010000 #define CST4319_CBUCK_MODE_MASK 0x00060000 #define CST4319_CBUCK_MODE_BURST 0x00020000 #define CST4319_CBUCK_MODE_LPBURST 0x00060000 #define CST4319_RCAL_VALID 0x01000000 #define CST4319_RCAL_VALUE_MASK 0x3e000000 #define CST4319_RCAL_VALUE_SHIFT 25 /* 4336 chip-specific ChipStatus register bits */ #define CST4336_SPI_MODE_MASK 0x00000001 #define CST4336_SPROM_PRESENT 0x00000002 #define CST4336_OTP_PRESENT 0x00000004 #define CST4336_ARMREMAP_0 0x00000008 #define CST4336_ILPDIV_EN_MASK 0x00000010 #define CST4336_ILPDIV_EN_SHIFT 4 #define CST4336_XTAL_PD_POL_MASK 0x00000020 #define CST4336_XTAL_PD_POL_SHIFT 5 #define CST4336_LPO_SEL_MASK 0x00000040 #define CST4336_LPO_SEL_SHIFT 6 #define CST4336_RES_INIT_MODE_MASK 0x00000180 #define CST4336_RES_INIT_MODE_SHIFT 7 #define CST4336_CBUCK_MODE_MASK 0x00000600 #define CST4336_CBUCK_MODE_SHIFT 9 /* 4313 chip-specific ChipStatus register bits */ #define CST4313_SPROM_PRESENT 1 #define CST4313_OTP_PRESENT 2 #define CST4313_SPROM_OTP_SEL_MASK 0x00000002 #define CST4313_SPROM_OTP_SEL_SHIFT 0 /* 4313 Chip specific ChipControl register bits */ /* 12 mA drive strengh for later 4313 */ #define CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* Manufacturer Ids */ #define MFGID_ARM 0x43b #define MFGID_BRCM 0x4bf #define MFGID_MIPS 0x4a7 /* Enumeration ROM registers */ #define ER_EROMENTRY 0x000 #define ER_REMAPCONTROL 0xe00 #define ER_REMAPSELECT 0xe04 #define ER_MASTERSELECT 0xe10 #define ER_ITCR 0xf00 #define ER_ITIP 0xf04 /* Erom entries */ #define ER_TAG 0xe #define ER_TAG1 0x6 #define ER_VALID 1 #define ER_CI 0 #define ER_MP 2 #define ER_ADD 4 #define ER_END 0xe #define ER_BAD 0xffffffff /* EROM CompIdentA */ #define CIA_MFG_MASK 0xfff00000 #define CIA_MFG_SHIFT 20 #define CIA_CID_MASK 0x000fff00 #define CIA_CID_SHIFT 8 #define CIA_CCL_MASK 0x000000f0 #define CIA_CCL_SHIFT 4 /* EROM CompIdentB */ #define CIB_REV_MASK 0xff000000 #define CIB_REV_SHIFT 24 #define CIB_NSW_MASK 0x00f80000 #define CIB_NSW_SHIFT 19 #define CIB_NMW_MASK 0x0007c000 #define CIB_NMW_SHIFT 14 #define CIB_NSP_MASK 0x00003e00 #define CIB_NSP_SHIFT 9 #define CIB_NMP_MASK 0x000001f0 #define CIB_NMP_SHIFT 4 /* EROM AddrDesc */ #define AD_ADDR_MASK 0xfffff000 #define AD_SP_MASK 0x00000f00 #define AD_SP_SHIFT 8 #define AD_ST_MASK 0x000000c0 #define AD_ST_SHIFT 6 #define AD_ST_SLAVE 0x00000000 #define AD_ST_BRIDGE 0x00000040 #define AD_ST_SWRAP 0x00000080 #define AD_ST_MWRAP 0x000000c0 #define AD_SZ_MASK 0x00000030 #define AD_SZ_SHIFT 4 #define AD_SZ_4K 0x00000000 #define AD_SZ_8K 0x00000010 #define AD_SZ_16K 0x00000020 #define AD_SZ_SZD 0x00000030 #define AD_AG32 0x00000008 #define AD_ADDR_ALIGN 0x00000fff #define AD_SZ_BASE 0x00001000 /* 4KB */ /* EROM SizeDesc */ #define SD_SZ_MASK 0xfffff000 #define SD_SG32 0x00000008 #define SD_SZ_ALIGN 0x00000fff /* PCI config space bit 4 for 4306c0 slow clock source */ #define PCI_CFG_GPIO_SCS 0x10 /* PCI config space GPIO 14 for Xtal power-up */ #define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 15 for PLL power-down */ #define PCI_CFG_GPIO_PLL 0x80 /* power control defines */ #define PLL_DELAY 150 /* us pll on delay */ #define FREF_DELAY 200 /* us fref change delay */ #define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ /* resetctrl */ #define AIRC_RESET 1 #define NOREV -1 /* Invalid rev */ /* GPIO Based LED powersave defines */ #define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */ #define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */ /* When Srom support present, fields in sromcontrol */ #define SRC_START 0x80000000 #define SRC_BUSY 0x80000000 #define SRC_OPCODE 0x60000000 #define SRC_OP_READ 0x00000000 #define SRC_OP_WRITE 0x20000000 #define SRC_OP_WRDIS 0x40000000 #define SRC_OP_WREN 0x60000000 #define SRC_OTPSEL 0x00000010 #define SRC_LOCK 0x00000008 #define SRC_SIZE_MASK 0x00000006 #define SRC_SIZE_1K 0x00000000 #define SRC_SIZE_4K 0x00000002 #define SRC_SIZE_16K 0x00000004 #define SRC_SIZE_SHIFT 1 #define SRC_PRESENT 0x00000001 /* External PA enable mask */ #define GPIO_CTRL_EPA_EN_MASK 0x40 #define DEFAULT_GPIOTIMERVAL \ ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME) #define BADIDX (SI_MAXCORES + 1) #define IS_SIM(chippkg) \ ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID)) #define PCI(sih) (ai_get_buscoretype(sih) == PCI_CORE_ID) #define PCIE(sih) (ai_get_buscoretype(sih) == PCIE_CORE_ID) #define PCI_FORCEHT(sih) (PCIE(sih) && (ai_get_chip_id(sih) == BCM4716_CHIP_ID)) #ifdef DEBUG #define SI_MSG(fmt, ...) pr_debug(fmt, ##__VA_ARGS__) #else #define SI_MSG(fmt, ...) no_printk(fmt, ##__VA_ARGS__) #endif /* DEBUG */ #define GOODCOREADDR(x, b) \ (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \ IS_ALIGNED((x), SI_CORE_SIZE)) struct aidmp { u32 oobselina30; /* 0x000 */ u32 oobselina74; /* 0x004 */ u32 PAD[6]; u32 oobselinb30; /* 0x020 */ u32 oobselinb74; /* 0x024 */ u32 PAD[6]; u32 oobselinc30; /* 0x040 */ u32 oobselinc74; /* 0x044 */ u32 PAD[6]; u32 oobselind30; /* 0x060 */ u32 oobselind74; /* 0x064 */ u32 PAD[38]; u32 oobselouta30; /* 0x100 */ u32 oobselouta74; /* 0x104 */ u32 PAD[6]; u32 oobseloutb30; /* 0x120 */ u32 oobseloutb74; /* 0x124 */ u32 PAD[6]; u32 oobseloutc30; /* 0x140 */ u32 oobseloutc74; /* 0x144 */ u32 PAD[6]; u32 oobseloutd30; /* 0x160 */ u32 oobseloutd74; /* 0x164 */ u32 PAD[38]; u32 oobsynca; /* 0x200 */ u32 oobseloutaen; /* 0x204 */ u32 PAD[6]; u32 oobsyncb; /* 0x220 */ u32 oobseloutben; /* 0x224 */ u32 PAD[6]; u32 oobsyncc; /* 0x240 */ u32 oobseloutcen; /* 0x244 */ u32 PAD[6]; u32 oobsyncd; /* 0x260 */ u32 oobseloutden; /* 0x264 */ u32 PAD[38]; u32 oobaextwidth; /* 0x300 */ u32 oobainwidth; /* 0x304 */ u32 oobaoutwidth; /* 0x308 */ u32 PAD[5]; u32 oobbextwidth; /* 0x320 */ u32 oobbinwidth; /* 0x324 */ u32 oobboutwidth; /* 0x328 */ u32 PAD[5]; u32 oobcextwidth; /* 0x340 */ u32 oobcinwidth; /* 0x344 */ u32 oobcoutwidth; /* 0x348 */ u32 PAD[5]; u32 oobdextwidth; /* 0x360 */ u32 oobdinwidth; /* 0x364 */ u32 oobdoutwidth; /* 0x368 */ u32 PAD[37]; u32 ioctrlset; /* 0x400 */ u32 ioctrlclear; /* 0x404 */ u32 ioctrl; /* 0x408 */ u32 PAD[61]; u32 iostatus; /* 0x500 */ u32 PAD[127]; u32 ioctrlwidth; /* 0x700 */ u32 iostatuswidth; /* 0x704 */ u32 PAD[62]; u32 resetctrl; /* 0x800 */ u32 resetstatus; /* 0x804 */ u32 resetreadid; /* 0x808 */ u32 resetwriteid; /* 0x80c */ u32 PAD[60]; u32 errlogctrl; /* 0x900 */ u32 errlogdone; /* 0x904 */ u32 errlogstatus; /* 0x908 */ u32 errlogaddrlo; /* 0x90c */ u32 errlogaddrhi; /* 0x910 */ u32 errlogid; /* 0x914 */ u32 errloguser; /* 0x918 */ u32 errlogflags; /* 0x91c */ u32 PAD[56]; u32 intstatus; /* 0xa00 */ u32 PAD[127]; u32 config; /* 0xe00 */ u32 PAD[63]; u32 itcr; /* 0xf00 */ u32 PAD[3]; u32 itipooba; /* 0xf10 */ u32 itipoobb; /* 0xf14 */ u32 itipoobc; /* 0xf18 */ u32 itipoobd; /* 0xf1c */ u32 PAD[4]; u32 itipoobaout; /* 0xf30 */ u32 itipoobbout; /* 0xf34 */ u32 itipoobcout; /* 0xf38 */ u32 itipoobdout; /* 0xf3c */ u32 PAD[4]; u32 itopooba; /* 0xf50 */ u32 itopoobb; /* 0xf54 */ u32 itopoobc; /* 0xf58 */ u32 itopoobd; /* 0xf5c */ u32 PAD[4]; u32 itopoobain; /* 0xf70 */ u32 itopoobbin; /* 0xf74 */ u32 itopoobcin; /* 0xf78 */ u32 itopoobdin; /* 0xf7c */ u32 PAD[4]; u32 itopreset; /* 0xf90 */ u32 PAD[15]; u32 peripherialid4; /* 0xfd0 */ u32 peripherialid5; /* 0xfd4 */ u32 peripherialid6; /* 0xfd8 */ u32 peripherialid7; /* 0xfdc */ u32 peripherialid0; /* 0xfe0 */ u32 peripherialid1; /* 0xfe4 */ u32 peripherialid2; /* 0xfe8 */ u32 peripherialid3; /* 0xfec */ u32 componentid0; /* 0xff0 */ u32 componentid1; /* 0xff4 */ u32 componentid2; /* 0xff8 */ u32 componentid3; /* 0xffc */ }; /* return true if PCIE capability exists in the pci config space */ static bool ai_ispcie(struct si_info *sii) { u8 cap_ptr; cap_ptr = pcicore_find_pci_capability(sii->pcibus, PCI_CAP_ID_EXP, NULL, NULL); if (!cap_ptr) return false; return true; } static bool ai_buscore_prep(struct si_info *sii) { /* kludge to enable the clock on the 4306 which lacks a slowclock */ if (!ai_ispcie(sii)) ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON); return true; } static bool ai_buscore_setup(struct si_info *sii, struct bcma_device *cc) { struct bcma_device *pci = NULL; struct bcma_device *pcie = NULL; struct bcma_device *core; /* no cores found, bail out */ if (cc->bus->nr_cores == 0) return false; /* get chipcommon rev */ sii->pub.ccrev = cc->id.rev; /* get chipcommon chipstatus */ if (ai_get_ccrev(&sii->pub) >= 11) sii->chipst = bcma_read32(cc, CHIPCREGOFFS(chipstatus)); /* get chipcommon capabilites */ sii->pub.cccaps = bcma_read32(cc, CHIPCREGOFFS(capabilities)); /* get pmu rev and caps */ if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) { sii->pub.pmucaps = bcma_read32(cc, CHIPCREGOFFS(pmucapabilities)); sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK; } /* figure out buscore */ list_for_each_entry(core, &cc->bus->cores, list) { uint cid, crev; cid = core->id.id; crev = core->id.rev; if (cid == PCI_CORE_ID) { pci = core; } else if (cid == PCIE_CORE_ID) { pcie = core; } } if (pci && pcie) { if (ai_ispcie(sii)) pci = NULL; else pcie = NULL; } if (pci) { sii->buscore = pci; } else if (pcie) { sii->buscore = pcie; } /* fixup necessary chip/core configurations */ if (!sii->pch) { sii->pch = pcicore_init(&sii->pub, sii->icbus->drv_pci.core); if (sii->pch == NULL) return false; } if (ai_pci_fixcfg(&sii->pub)) return false; return true; } /* * get boardtype and boardrev */ static __used void ai_nvram_process(struct si_info *sii) { uint w = 0; /* do a pci config read to get subsystem id and subvendor id */ pci_read_config_dword(sii->pcibus, PCI_SUBSYSTEM_VENDOR_ID, &w); sii->pub.boardvendor = w & 0xffff; sii->pub.boardtype = (w >> 16) & 0xffff; } static struct si_info *ai_doattach(struct si_info *sii, struct bcma_bus *pbus) { struct si_pub *sih = &sii->pub; u32 w, savewin; struct bcma_device *cc; uint socitype; savewin = 0; sii->icbus = pbus; sii->pcibus = pbus->host_pci; /* switch to Chipcommon core */ cc = pbus->drv_cc.core; /* bus/core/clk setup for register access */ if (!ai_buscore_prep(sii)) return NULL; /* * ChipID recognition. * We assume we can read chipid at offset 0 from the regs arg. * If we add other chiptypes (or if we need to support old sdio * hosts w/o chipcommon), some way of recognizing them needs to * be added here. */ w = bcma_read32(cc, CHIPCREGOFFS(chipid)); socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT; /* Might as wll fill in chip id rev & pkg */ sih->chip = w & CID_ID_MASK; sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT; sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT; /* scan for cores */ if (socitype != SOCI_AI) return NULL; SI_MSG("Found chip type AI (0x%08x)\n", w); if (!ai_buscore_setup(sii, cc)) goto exit; /* Init nvram from sprom/otp if they exist */ if (srom_var_init(&sii->pub)) goto exit; ai_nvram_process(sii); /* === NVRAM, clock is ready === */ bcma_write32(cc, CHIPCREGOFFS(gpiopullup), 0); bcma_write32(cc, CHIPCREGOFFS(gpiopulldown), 0); /* PMU specific initializations */ if (ai_get_cccaps(sih) & CC_CAP_PMU) { si_pmu_init(sih); (void)si_pmu_measure_alpclk(sih); si_pmu_res_init(sih); } /* setup the GPIO based LED powersave register */ w = getintvar(sih, BRCMS_SROM_LEDDC); if (w == 0) w = DEFAULT_GPIOTIMERVAL; ai_cc_reg(sih, offsetof(struct chipcregs, gpiotimerval), ~0, w); if (PCIE(sih)) pcicore_attach(sii->pch, SI_DOATTACH); if (ai_get_chip_id(sih) == BCM43224_CHIP_ID) { /* * enable 12 mA drive strenth for 43224 and * set chipControl register bit 15 */ if (ai_get_chiprev(sih) == 0) { SI_MSG("Applying 43224A0 WARs\n"); ai_cc_reg(sih, offsetof(struct chipcregs, chipcontrol), CCTRL43224_GPIO_TOGGLE, CCTRL43224_GPIO_TOGGLE); si_pmu_chipcontrol(sih, 0, CCTRL_43224A0_12MA_LED_DRIVE, CCTRL_43224A0_12MA_LED_DRIVE); } if (ai_get_chiprev(sih) >= 1) { SI_MSG("Applying 43224B0+ WARs\n"); si_pmu_chipcontrol(sih, 0, CCTRL_43224B0_12MA_LED_DRIVE, CCTRL_43224B0_12MA_LED_DRIVE); } } if (ai_get_chip_id(sih) == BCM4313_CHIP_ID) { /* * enable 12 mA drive strenth for 4313 and * set chipControl register bit 1 */ SI_MSG("Applying 4313 WARs\n"); si_pmu_chipcontrol(sih, 0, CCTRL_4313_12MA_LED_DRIVE, CCTRL_4313_12MA_LED_DRIVE); } return sii; exit: if (sii->pch) pcicore_deinit(sii->pch); sii->pch = NULL; return NULL; } /* * Allocate a si handle and do the attach. */ struct si_pub * ai_attach(struct bcma_bus *pbus) { struct si_info *sii; /* alloc struct si_info */ sii = kzalloc(sizeof(struct si_info), GFP_ATOMIC); if (sii == NULL) return NULL; if (ai_doattach(sii, pbus) == NULL) { kfree(sii); return NULL; } return (struct si_pub *) sii; } /* may be called with core in reset */ void ai_detach(struct si_pub *sih) { struct si_info *sii; struct si_pub *si_local = NULL; memcpy(&si_local, &sih, sizeof(struct si_pub **)); sii = (struct si_info *)sih; if (sii == NULL) return; if (sii->pch) pcicore_deinit(sii->pch); sii->pch = NULL; srom_free_vars(sih); kfree(sii); } /* return index of coreid or BADIDX if not found */ struct bcma_device *ai_findcore(struct si_pub *sih, u16 coreid, u16 coreunit) { struct bcma_device *core; struct si_info *sii; uint found; sii = (struct si_info *)sih; found = 0; list_for_each_entry(core, &sii->icbus->cores, list) if (core->id.id == coreid) { if (found == coreunit) return core; found++; } return NULL; } /* * read/modify chipcommon core register. */ uint ai_cc_reg(struct si_pub *sih, uint regoff, u32 mask, u32 val) { struct bcma_device *cc; u32 w; struct si_info *sii; sii = (struct si_info *)sih; cc = sii->icbus->drv_cc.core; /* mask and set */ if (mask || val) { bcma_maskset32(cc, regoff, ~mask, val); } /* readback */ w = bcma_read32(cc, regoff); return w; } /* return the slow clock source - LPO, XTAL, or PCI */ static uint ai_slowclk_src(struct si_pub *sih, struct bcma_device *cc) { struct si_info *sii; u32 val; sii = (struct si_info *)sih; if (ai_get_ccrev(&sii->pub) < 6) { pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &val); if (val & PCI_CFG_GPIO_SCS) return SCC_SS_PCI; return SCC_SS_XTAL; } else if (ai_get_ccrev(&sii->pub) < 10) { return bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & SCC_SS_MASK; } else /* Insta-clock */ return SCC_SS_XTAL; } /* * return the ILP (slowclock) min or max frequency * precondition: we've established the chip has dynamic clk control */ static uint ai_slowclk_freq(struct si_pub *sih, bool max_freq, struct bcma_device *cc) { u32 slowclk; uint div; slowclk = ai_slowclk_src(sih, cc); if (ai_get_ccrev(sih) < 6) { if (slowclk == SCC_SS_PCI) return max_freq ? (PCIMAXFREQ / 64) : (PCIMINFREQ / 64); else return max_freq ? (XTALMAXFREQ / 32) : (XTALMINFREQ / 32); } else if (ai_get_ccrev(sih) < 10) { div = 4 * (((bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)) & SCC_CD_MASK) >> SCC_CD_SHIFT) + 1); if (slowclk == SCC_SS_LPO) return max_freq ? LPOMAXFREQ : LPOMINFREQ; else if (slowclk == SCC_SS_XTAL) return max_freq ? (XTALMAXFREQ / div) : (XTALMINFREQ / div); else if (slowclk == SCC_SS_PCI) return max_freq ? (PCIMAXFREQ / div) : (PCIMINFREQ / div); } else { /* Chipc rev 10 is InstaClock */ div = bcma_read32(cc, CHIPCREGOFFS(system_clk_ctl)); div = 4 * ((div >> SYCC_CD_SHIFT) + 1); return max_freq ? XTALMAXFREQ : (XTALMINFREQ / div); } return 0; } static void ai_clkctl_setdelay(struct si_pub *sih, struct bcma_device *cc) { uint slowmaxfreq, pll_delay, slowclk; uint pll_on_delay, fref_sel_delay; pll_delay = PLL_DELAY; /* * If the slow clock is not sourced by the xtal then * add the xtal_on_delay since the xtal will also be * powered down by dynamic clk control logic. */ slowclk = ai_slowclk_src(sih, cc); if (slowclk != SCC_SS_XTAL) pll_delay += XTAL_ON_DELAY; /* Starting with 4318 it is ILP that is used for the delays */ slowmaxfreq = ai_slowclk_freq(sih, (ai_get_ccrev(sih) >= 10) ? false : true, cc); pll_on_delay = ((slowmaxfreq * pll_delay) + 999999) / 1000000; fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000; bcma_write32(cc, CHIPCREGOFFS(pll_on_delay), pll_on_delay); bcma_write32(cc, CHIPCREGOFFS(fref_sel_delay), fref_sel_delay); } /* initialize power control delay registers */ void ai_clkctl_init(struct si_pub *sih) { struct bcma_device *cc; if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL)) return; cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); if (cc == NULL) return; /* set all Instaclk chip ILP to 1 MHz */ if (ai_get_ccrev(sih) >= 10) bcma_maskset32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_CD_MASK, (ILP_DIV_1MHZ << SYCC_CD_SHIFT)); ai_clkctl_setdelay(sih, cc); } /* * return the value suitable for writing to the * dot11 core FAST_PWRUP_DELAY register */ u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih) { struct si_info *sii; struct bcma_device *cc; uint slowminfreq; u16 fpdelay; sii = (struct si_info *)sih; if (ai_get_cccaps(sih) & CC_CAP_PMU) { fpdelay = si_pmu_fast_pwrup_delay(sih); return fpdelay; } if (!(ai_get_cccaps(sih) & CC_CAP_PWR_CTL)) return 0; fpdelay = 0; cc = ai_findcore(sih, CC_CORE_ID, 0); if (cc) { slowminfreq = ai_slowclk_freq(sih, false, cc); fpdelay = (((bcma_read32(cc, CHIPCREGOFFS(pll_on_delay)) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq; } return fpdelay; } /* turn primary xtal and/or pll off/on */ int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on) { struct si_info *sii; u32 in, out, outen; sii = (struct si_info *)sih; /* pcie core doesn't have any mapping to control the xtal pu */ if (PCIE(sih)) return -1; pci_read_config_dword(sii->pcibus, PCI_GPIO_IN, &in); pci_read_config_dword(sii->pcibus, PCI_GPIO_OUT, &out); pci_read_config_dword(sii->pcibus, PCI_GPIO_OUTEN, &outen); /* * Avoid glitching the clock if GPRS is already using it. * We can't actually read the state of the PLLPD so we infer it * by the value of XTAL_PU which *is* readable via gpioin. */ if (on && (in & PCI_CFG_GPIO_XTAL)) return 0; if (what & XTAL) outen |= PCI_CFG_GPIO_XTAL; if (what & PLL) outen |= PCI_CFG_GPIO_PLL; if (on) { /* turn primary xtal on */ if (what & XTAL) { out |= PCI_CFG_GPIO_XTAL; if (what & PLL) out |= PCI_CFG_GPIO_PLL; pci_write_config_dword(sii->pcibus, PCI_GPIO_OUT, out); pci_write_config_dword(sii->pcibus, PCI_GPIO_OUTEN, outen); udelay(XTAL_ON_DELAY); } /* turn pll on */ if (what & PLL) { out &= ~PCI_CFG_GPIO_PLL; pci_write_config_dword(sii->pcibus, PCI_GPIO_OUT, out); mdelay(2); } } else { if (what & XTAL) out &= ~PCI_CFG_GPIO_XTAL; if (what & PLL) out |= PCI_CFG_GPIO_PLL; pci_write_config_dword(sii->pcibus, PCI_GPIO_OUT, out); pci_write_config_dword(sii->pcibus, PCI_GPIO_OUTEN, outen); } return 0; } /* clk control mechanism through chipcommon, no policy checking */ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) { struct bcma_device *cc; u32 scc; /* chipcommon cores prior to rev6 don't support dynamic clock control */ if (ai_get_ccrev(&sii->pub) < 6) return false; cc = ai_findcore(&sii->pub, BCMA_CORE_CHIPCOMMON, 0); if (!(ai_get_cccaps(&sii->pub) & CC_CAP_PWR_CTL) && (ai_get_ccrev(&sii->pub) < 20)) return mode == CLK_FAST; switch (mode) { case CLK_FAST: /* FORCEHT, fast (pll) clock */ if (ai_get_ccrev(&sii->pub) < 10) { /* * don't forget to force xtal back * on before we clear SCC_DYN_XTAL.. */ ai_clkctl_xtal(&sii->pub, XTAL, ON); bcma_maskset32(cc, CHIPCREGOFFS(slow_clk_ctl), (SCC_XC | SCC_FS | SCC_IP), SCC_IP); } else if (ai_get_ccrev(&sii->pub) < 20) { bcma_set32(cc, CHIPCREGOFFS(system_clk_ctl), SYCC_HR); } else { bcma_set32(cc, CHIPCREGOFFS(clk_ctl_st), CCS_FORCEHT); } /* wait for the PLL */ if (ai_get_cccaps(&sii->pub) & CC_CAP_PMU) { u32 htavail = CCS_HTAVAIL; SPINWAIT(((bcma_read32(cc, CHIPCREGOFFS(clk_ctl_st)) & htavail) == 0), PMU_MAX_TRANSITION_DLY); } else { udelay(PLL_DELAY); } break; case CLK_DYNAMIC: /* enable dynamic clock control */ if (ai_get_ccrev(&sii->pub) < 10) { scc = bcma_read32(cc, CHIPCREGOFFS(slow_clk_ctl)); scc &= ~(SCC_FS | SCC_IP | SCC_XC); if ((scc & SCC_SS_MASK) != SCC_SS_XTAL) scc |= SCC_XC; bcma_write32(cc, CHIPCREGOFFS(slow_clk_ctl), scc); /* * for dynamic control, we have to * release our xtal_pu "force on" */ if (scc & SCC_XC) ai_clkctl_xtal(&sii->pub, XTAL, OFF); } else if (ai_get_ccrev(&sii->pub) < 20) { /* Instaclock */ bcma_mask32(cc, CHIPCREGOFFS(system_clk_ctl), ~SYCC_HR); } else { bcma_mask32(cc, CHIPCREGOFFS(clk_ctl_st), ~CCS_FORCEHT); } break; default: break; } return mode == CLK_FAST; } /* * clock control policy function throught chipcommon * * set dynamic clk control mode (forceslow, forcefast, dynamic) * returns true if we are forcing fast clock * this is a wrapper over the next internal function * to allow flexible policy settings for outside caller */ bool ai_clkctl_cc(struct si_pub *sih, uint mode) { struct si_info *sii; sii = (struct si_info *)sih; /* chipcommon cores prior to rev6 don't support dynamic clock control */ if (ai_get_ccrev(sih) < 6) return false; if (PCI_FORCEHT(sih)) return mode == CLK_FAST; return _ai_clkctl_cc(sii, mode); } void ai_pci_up(struct si_pub *sih) { struct si_info *sii; sii = (struct si_info *)sih; if (PCI_FORCEHT(sih)) _ai_clkctl_cc(sii, CLK_FAST); if (PCIE(sih)) pcicore_up(sii->pch, SI_PCIUP); } /* Unconfigure and/or apply various WARs when system is going to sleep mode */ void ai_pci_sleep(struct si_pub *sih) { struct si_info *sii; sii = (struct si_info *)sih; pcicore_sleep(sii->pch); } /* Unconfigure and/or apply various WARs when going down */ void ai_pci_down(struct si_pub *sih) { struct si_info *sii; sii = (struct si_info *)sih; /* release FORCEHT since chip is going to "down" state */ if (PCI_FORCEHT(sih)) _ai_clkctl_cc(sii, CLK_DYNAMIC); pcicore_down(sii->pch, SI_PCIDOWN); } /* * Configure the pci core for pci client (NIC) action * coremask is the bitvec of cores by index to be enabled. */ void ai_pci_setup(struct si_pub *sih, uint coremask) { struct si_info *sii; u32 w; sii = (struct si_info *)sih; /* * Enable sb->pci interrupts. Assume * PCI rev 2.3 support was added in pci core rev 6 and things changed.. */ if (PCIE(sih) || (PCI(sih) && (ai_get_buscorerev(sih) >= 6))) { /* pci config write to set this core bit in PCIIntMask */ pci_read_config_dword(sii->pcibus, PCI_INT_MASK, &w); w |= (coremask << PCI_SBIM_SHIFT); pci_write_config_dword(sii->pcibus, PCI_INT_MASK, w); } if (PCI(sih)) { pcicore_pci_setup(sii->pch); } } /* * Fixup SROMless PCI device's configuration. * The current core may be changed upon return. */ int ai_pci_fixcfg(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; /* Fixup PI in SROM shadow area to enable the correct PCI core access */ /* check 'pi' is correct and fix it if not */ pcicore_fixcfg(sii->pch); pcicore_hwup(sii->pch); return 0; } /* mask&set gpiocontrol bits */ u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority) { uint regoff; regoff = offsetof(struct chipcregs, gpiocontrol); return ai_cc_reg(sih, regoff, mask, val); } void ai_chipcontrl_epa4331(struct si_pub *sih, bool on) { struct bcma_device *cc; u32 val; cc = ai_findcore(sih, CC_CORE_ID, 0); if (on) { if (ai_get_chippkg(sih) == 9 || ai_get_chippkg(sih) == 0xb) /* Ext PA Controls for 4331 12x9 Package */ bcma_set32(cc, CHIPCREGOFFS(chipcontrol), CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5); else /* Ext PA Controls for 4331 12x12 Package */ bcma_set32(cc, CHIPCREGOFFS(chipcontrol), CCTRL4331_EXTPA_EN); } else { val &= ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5); bcma_mask32(cc, CHIPCREGOFFS(chipcontrol), ~(CCTRL4331_EXTPA_EN | CCTRL4331_EXTPA_ON_GPIO2_5)); } } /* Enable BT-COEX & Ex-PA for 4313 */ void ai_epa_4313war(struct si_pub *sih) { struct bcma_device *cc; cc = ai_findcore(sih, CC_CORE_ID, 0); /* EPA Fix */ bcma_set32(cc, CHIPCREGOFFS(gpiocontrol), GPIO_CTRL_EPA_EN_MASK); } /* check if the device is removed */ bool ai_deviceremoved(struct si_pub *sih) { u32 w; struct si_info *sii; sii = (struct si_info *)sih; pci_read_config_dword(sii->pcibus, PCI_VENDOR_ID, &w); if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) return true; return false; } bool ai_is_sprom_available(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; if (ai_get_ccrev(sih) >= 31) { struct bcma_device *cc; u32 sromctrl; if ((ai_get_cccaps(sih) & CC_CAP_SROM) == 0) return false; cc = ai_findcore(sih, BCMA_CORE_CHIPCOMMON, 0); sromctrl = bcma_read32(cc, CHIPCREGOFFS(sromcontrol)); return sromctrl & SRC_PRESENT; } switch (ai_get_chip_id(sih)) { case BCM4313_CHIP_ID: return (sii->chipst & CST4313_SPROM_PRESENT) != 0; default: return true; } } bool ai_is_otp_disabled(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; switch (ai_get_chip_id(sih)) { case BCM4313_CHIP_ID: return (sii->chipst & CST4313_OTP_PRESENT) == 0; /* These chips always have their OTP on */ case BCM43224_CHIP_ID: case BCM43225_CHIP_ID: default: return false; } } uint ai_get_buscoretype(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; return sii->buscore->id.id; } uint ai_get_buscorerev(struct si_pub *sih) { struct si_info *sii = (struct si_info *)sih; return sii->buscore->id.rev; }