/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __iwl_op_mode_h__ #define __iwl_op_mode_h__ #include #include struct iwl_op_mode; struct iwl_trans; struct sk_buff; struct iwl_device_cmd; struct iwl_rx_cmd_buffer; struct iwl_fw; struct iwl_cfg; /** * DOC: Operational mode - what is it ? * * The operational mode (a.k.a. op_mode) is the layer that implements * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses * the transport API to access the HW. The op_mode doesn't need to know how the * underlying HW works, since the transport layer takes care of that. * * There can be several op_mode: i.e. different fw APIs will require two * different op_modes. This is why the op_mode is virtualized. */ /** * DOC: Life cycle of the Operational mode * * The operational mode has a very simple life cycle. * * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the * capabilities advertised by the fw file (in TLV format). * 2) The driver layer starts the op_mode (ops->start) * 3) The op_mode registers mac80211 * 4) The op_mode is governed by mac80211 * 5) The driver layer stops the op_mode */ /** * struct iwl_op_mode_ops - op_mode specific operations * * The op_mode exports its ops so that external components can start it and * interact with it. The driver layer typically calls the start and stop * handlers, the transport layer calls the others. * * All the handlers MUST be implemented * * @start: start the op_mode. The transport layer is already allocated. * May sleep * @stop: stop the op_mode. Must free all the memory allocated. * May sleep * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the * HCMD this Rx responds to. Can't sleep. * @napi_add: NAPI initialization. The transport is fully responsible for NAPI, * but the higher layers need to know about it (in particular mac80211 to * to able to call the right NAPI RX functions); this function is needed * to eventually call netif_napi_add() with higher layer involvement. * @queue_full: notifies that a HW queue is full. * Must be atomic and called with BH disabled. * @queue_not_full: notifies that a HW queue is not full any more. * Must be atomic and called with BH disabled. * @hw_rf_kill:notifies of a change in the HW rf kill switch. True means that * the radio is killed. Return %true if the device should be stopped by * the transport immediately after the call. May sleep. * @free_skb: allows the transport layer to free skbs that haven't been * reclaimed by the op_mode. This can happen when the driver is freed and * there are Tx packets pending in the transport layer. * Must be atomic * @nic_error: error notification. Must be atomic and must be called with BH * disabled. * @cmd_queue_full: Called when the command queue gets full. Must be atomic and * called with BH disabled. * @nic_config: configure NIC, called before firmware is started. * May sleep * @wimax_active: invoked when WiMax becomes active. May sleep * @enter_d0i3: configure the fw to enter d0i3. return 1 to indicate d0i3 * entrance is aborted (e.g. due to held reference). May sleep. * @exit_d0i3: configure the fw to exit d0i3. May sleep. */ struct iwl_op_mode_ops { struct iwl_op_mode *(*start)(struct iwl_trans *trans, const struct iwl_cfg *cfg, const struct iwl_fw *fw, struct dentry *dbgfs_dir); void (*stop)(struct iwl_op_mode *op_mode); int (*rx)(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd); void (*napi_add)(struct iwl_op_mode *op_mode, struct napi_struct *napi, struct net_device *napi_dev, int (*poll)(struct napi_struct *, int), int weight); void (*queue_full)(struct iwl_op_mode *op_mode, int queue); void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue); bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state); void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb); void (*nic_error)(struct iwl_op_mode *op_mode); void (*cmd_queue_full)(struct iwl_op_mode *op_mode); void (*nic_config)(struct iwl_op_mode *op_mode); void (*wimax_active)(struct iwl_op_mode *op_mode); int (*enter_d0i3)(struct iwl_op_mode *op_mode); int (*exit_d0i3)(struct iwl_op_mode *op_mode); }; int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops); void iwl_opmode_deregister(const char *name); /** * struct iwl_op_mode - operational mode * @ops: pointer to its own ops * * This holds an implementation of the mac80211 / fw API. */ struct iwl_op_mode { const struct iwl_op_mode_ops *ops; char op_mode_specific[0] __aligned(sizeof(void *)); }; static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode) { might_sleep(); op_mode->ops->stop(op_mode); } static inline int iwl_op_mode_rx(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd) { return op_mode->ops->rx(op_mode, rxb, cmd); } static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode, int queue) { op_mode->ops->queue_full(op_mode, queue); } static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, int queue) { op_mode->ops->queue_not_full(op_mode, queue); } static inline bool __must_check iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) { might_sleep(); return op_mode->ops->hw_rf_kill(op_mode, state); } static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb) { op_mode->ops->free_skb(op_mode, skb); } static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode) { op_mode->ops->nic_error(op_mode); } static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode) { op_mode->ops->cmd_queue_full(op_mode); } static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) { might_sleep(); op_mode->ops->nic_config(op_mode); } static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) { might_sleep(); op_mode->ops->wimax_active(op_mode); } static inline int iwl_op_mode_enter_d0i3(struct iwl_op_mode *op_mode) { might_sleep(); if (!op_mode->ops->enter_d0i3) return 0; return op_mode->ops->enter_d0i3(op_mode); } static inline int iwl_op_mode_exit_d0i3(struct iwl_op_mode *op_mode) { might_sleep(); if (!op_mode->ops->exit_d0i3) return 0; return op_mode->ops->exit_d0i3(op_mode); } static inline void iwl_op_mode_napi_add(struct iwl_op_mode *op_mode, struct napi_struct *napi, struct net_device *napi_dev, int (*poll)(struct napi_struct *, int), int weight) { if (!op_mode->ops->napi_add) return; op_mode->ops->napi_add(op_mode, napi, napi_dev, poll, weight); } #endif /* __iwl_op_mode_h__ */