/* * phy-ti-pipe3 - PIPE3 PHY driver. * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * Author: Kishon Vijay Abraham I * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #include #include #include #include #include #include #include #include #include #include #include #include #define PLL_STATUS 0x00000004 #define PLL_GO 0x00000008 #define PLL_CONFIGURATION1 0x0000000C #define PLL_CONFIGURATION2 0x00000010 #define PLL_CONFIGURATION3 0x00000014 #define PLL_CONFIGURATION4 0x00000020 #define PLL_REGM_MASK 0x001FFE00 #define PLL_REGM_SHIFT 0x9 #define PLL_REGM_F_MASK 0x0003FFFF #define PLL_REGM_F_SHIFT 0x0 #define PLL_REGN_MASK 0x000001FE #define PLL_REGN_SHIFT 0x1 #define PLL_SELFREQDCO_MASK 0x0000000E #define PLL_SELFREQDCO_SHIFT 0x1 #define PLL_SD_MASK 0x0003FC00 #define PLL_SD_SHIFT 10 #define SET_PLL_GO 0x1 #define PLL_LDOPWDN BIT(15) #define PLL_TICOPWDN BIT(16) #define PLL_LOCK 0x2 #define PLL_IDLE 0x1 /* * This is an Empirical value that works, need to confirm the actual * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status * to be correctly reflected in the PIPE3PHY_PLL_STATUS register. */ #define PLL_IDLE_TIME 100 /* in milliseconds */ #define PLL_LOCK_TIME 100 /* in milliseconds */ struct pipe3_dpll_params { u16 m; u8 n; u8 freq:3; u8 sd; u32 mf; }; struct pipe3_dpll_map { unsigned long rate; struct pipe3_dpll_params params; }; struct ti_pipe3 { void __iomem *pll_ctrl_base; struct device *dev; struct device *control_dev; struct clk *wkupclk; struct clk *sys_clk; struct clk *refclk; struct clk *div_clk; struct pipe3_dpll_map *dpll_map; }; static struct pipe3_dpll_map dpll_map_usb[] = { {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ { }, /* Terminator */ }; static struct pipe3_dpll_map dpll_map_sata[] = { {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ { }, /* Terminator */ }; static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) { return __raw_readl(addr + offset); } static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset, u32 data) { __raw_writel(data, addr + offset); } static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy) { unsigned long rate; struct pipe3_dpll_map *dpll_map = phy->dpll_map; rate = clk_get_rate(phy->sys_clk); for (; dpll_map->rate; dpll_map++) { if (rate == dpll_map->rate) return &dpll_map->params; } dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate); return NULL; } static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy); static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy); static int ti_pipe3_power_off(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); omap_control_phy_power(phy->control_dev, 0); return 0; } static int ti_pipe3_power_on(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); omap_control_phy_power(phy->control_dev, 1); return 0; } static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) { u32 val; unsigned long timeout; timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME); do { cpu_relax(); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); if (val & PLL_LOCK) return 0; } while (!time_after(jiffies, timeout)); dev_err(phy->dev, "DPLL failed to lock\n"); return -EBUSY; } static int ti_pipe3_dpll_program(struct ti_pipe3 *phy) { u32 val; struct pipe3_dpll_params *dpll_params; dpll_params = ti_pipe3_get_dpll_params(phy); if (!dpll_params) return -EINVAL; val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); val &= ~PLL_REGN_MASK; val |= dpll_params->n << PLL_REGN_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val &= ~PLL_SELFREQDCO_MASK; val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); val &= ~PLL_REGM_MASK; val |= dpll_params->m << PLL_REGM_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); val &= ~PLL_REGM_F_MASK; val |= dpll_params->mf << PLL_REGM_F_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); val &= ~PLL_SD_MASK; val |= dpll_params->sd << PLL_SD_SHIFT; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); return ti_pipe3_dpll_wait_lock(phy); } static int ti_pipe3_init(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); u32 val; int ret = 0; ti_pipe3_enable_clocks(phy); /* * Set pcie_pcs register to 0x96 for proper functioning of phy * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table * 18-1804. */ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { omap_control_pcie_pcs(phy->control_dev, 0x96); return 0; } /* Bring it out of IDLE if it is IDLE */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); if (val & PLL_IDLE) { val &= ~PLL_IDLE; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); ret = ti_pipe3_dpll_wait_lock(phy); } /* Program the DPLL only if not locked */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); if (!(val & PLL_LOCK)) if (ti_pipe3_dpll_program(phy)) return -EINVAL; return ret; } static int ti_pipe3_exit(struct phy *x) { struct ti_pipe3 *phy = phy_get_drvdata(x); u32 val; unsigned long timeout; /* SATA DPLL can't be powered down due to Errata i783 */ if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) return 0; /* PCIe doesn't have internal DPLL */ if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { /* Put DPLL in IDLE mode */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val |= PLL_IDLE; ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); /* wait for LDO and Oscillator to power down */ timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME); do { cpu_relax(); val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) break; } while (!time_after(jiffies, timeout)); if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n", val); return -EBUSY; } } ti_pipe3_disable_clocks(phy); return 0; } static struct phy_ops ops = { .init = ti_pipe3_init, .exit = ti_pipe3_exit, .power_on = ti_pipe3_power_on, .power_off = ti_pipe3_power_off, .owner = THIS_MODULE, }; static const struct of_device_id ti_pipe3_id_table[]; static int ti_pipe3_probe(struct platform_device *pdev) { struct ti_pipe3 *phy; struct phy *generic_phy; struct phy_provider *phy_provider; struct resource *res; struct device_node *node = pdev->dev.of_node; struct device_node *control_node; struct platform_device *control_pdev; const struct of_device_id *match; struct clk *clk; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; phy->dev = &pdev->dev; if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { match = of_match_device(ti_pipe3_id_table, &pdev->dev); if (!match) return -EINVAL; phy->dpll_map = (struct pipe3_dpll_map *)match->data; if (!phy->dpll_map) { dev_err(&pdev->dev, "no DPLL data\n"); return -EINVAL; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(phy->pll_ctrl_base)) return PTR_ERR(phy->pll_ctrl_base); phy->sys_clk = devm_clk_get(phy->dev, "sysclk"); if (IS_ERR(phy->sys_clk)) { dev_err(&pdev->dev, "unable to get sysclk\n"); return -EINVAL; } } phy->refclk = devm_clk_get(phy->dev, "refclk"); if (IS_ERR(phy->refclk)) { dev_err(&pdev->dev, "unable to get refclk\n"); /* older DTBs have missing refclk in SATA PHY * so don't bail out in case of SATA PHY. */ if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) return PTR_ERR(phy->refclk); } if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) { phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { dev_err(&pdev->dev, "unable to get wkupclk\n"); return PTR_ERR(phy->wkupclk); } } else { phy->wkupclk = ERR_PTR(-ENODEV); } if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { clk = devm_clk_get(phy->dev, "dpll_ref"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "unable to get dpll ref clk\n"); return PTR_ERR(clk); } clk_set_rate(clk, 1500000000); clk = devm_clk_get(phy->dev, "dpll_ref_m2"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "unable to get dpll ref m2 clk\n"); return PTR_ERR(clk); } clk_set_rate(clk, 100000000); clk = devm_clk_get(phy->dev, "phy-div"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "unable to get phy-div clk\n"); return PTR_ERR(clk); } clk_set_rate(clk, 100000000); phy->div_clk = devm_clk_get(phy->dev, "div-clk"); if (IS_ERR(phy->div_clk)) { dev_err(&pdev->dev, "unable to get div-clk\n"); return PTR_ERR(phy->div_clk); } } else { phy->div_clk = ERR_PTR(-ENODEV); } control_node = of_parse_phandle(node, "ctrl-module", 0); if (!control_node) { dev_err(&pdev->dev, "Failed to get control device phandle\n"); return -EINVAL; } control_pdev = of_find_device_by_node(control_node); if (!control_pdev) { dev_err(&pdev->dev, "Failed to get control device\n"); return -EINVAL; } phy->control_dev = &control_pdev->dev; omap_control_phy_power(phy->control_dev, 0); platform_set_drvdata(pdev, phy); pm_runtime_enable(phy->dev); /* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */ if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) if (!IS_ERR(phy->refclk)) clk_prepare_enable(phy->refclk); generic_phy = devm_phy_create(phy->dev, NULL, &ops); if (IS_ERR(generic_phy)) return PTR_ERR(generic_phy); phy_set_drvdata(generic_phy, phy); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); return 0; } static int ti_pipe3_remove(struct platform_device *pdev) { pm_runtime_disable(&pdev->dev); return 0; } static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy) { int ret = 0; if (!IS_ERR(phy->refclk)) { ret = clk_prepare_enable(phy->refclk); if (ret) { dev_err(phy->dev, "Failed to enable refclk %d\n", ret); return ret; } } if (!IS_ERR(phy->wkupclk)) { ret = clk_prepare_enable(phy->wkupclk); if (ret) { dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); goto disable_refclk; } } if (!IS_ERR(phy->div_clk)) { ret = clk_prepare_enable(phy->div_clk); if (ret) { dev_err(phy->dev, "Failed to enable div_clk %d\n", ret); goto disable_wkupclk; } } return 0; disable_wkupclk: if (!IS_ERR(phy->wkupclk)) clk_disable_unprepare(phy->wkupclk); disable_refclk: if (!IS_ERR(phy->refclk)) clk_disable_unprepare(phy->refclk); return ret; } static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy) { if (!IS_ERR(phy->wkupclk)) clk_disable_unprepare(phy->wkupclk); if (!IS_ERR(phy->refclk)) clk_disable_unprepare(phy->refclk); if (!IS_ERR(phy->div_clk)) clk_disable_unprepare(phy->div_clk); } static const struct of_device_id ti_pipe3_id_table[] = { { .compatible = "ti,phy-usb3", .data = dpll_map_usb, }, { .compatible = "ti,omap-usb3", .data = dpll_map_usb, }, { .compatible = "ti,phy-pipe3-sata", .data = dpll_map_sata, }, { .compatible = "ti,phy-pipe3-pcie", }, {} }; MODULE_DEVICE_TABLE(of, ti_pipe3_id_table); static struct platform_driver ti_pipe3_driver = { .probe = ti_pipe3_probe, .remove = ti_pipe3_remove, .driver = { .name = "ti-pipe3", .of_match_table = ti_pipe3_id_table, }, }; module_platform_driver(ti_pipe3_driver); MODULE_ALIAS("platform:ti_pipe3"); MODULE_AUTHOR("Texas Instruments Inc."); MODULE_DESCRIPTION("TI PIPE3 phy driver"); MODULE_LICENSE("GPL v2");