// SPDX-License-Identifier: GPL-2.0 /* * Combined GPIO and pin controller support for Renesas RZ/A2 (R7S9210) SoC * * Copyright (C) 2018 Chris Brandt */ /* * This pin controller/gpio combined driver supports Renesas devices of RZ/A2 * family. */ #include #include #include #include #include #include #include "core.h" #include "pinmux.h" #define DRIVER_NAME "pinctrl-rza2" #define RZA2_PINS_PER_PORT 8 #define RZA2_PIN_ID_TO_PORT(id) ((id) / RZA2_PINS_PER_PORT) #define RZA2_PIN_ID_TO_PIN(id) ((id) % RZA2_PINS_PER_PORT) /* * Use 16 lower bits [15:0] for pin identifier * Use 16 higher bits [31:16] for pin mux function */ #define MUX_PIN_ID_MASK GENMASK(15, 0) #define MUX_FUNC_MASK GENMASK(31, 16) #define MUX_FUNC_OFFS 16 #define MUX_FUNC(pinconf) ((pinconf & MUX_FUNC_MASK) >> MUX_FUNC_OFFS) static const char port_names[] = "0123456789ABCDEFGHJKLM"; struct rza2_pinctrl_priv { struct device *dev; void __iomem *base; struct pinctrl_pin_desc *pins; struct pinctrl_desc desc; struct pinctrl_dev *pctl; struct pinctrl_gpio_range gpio_range; int npins; }; #define RZA2_PDR(port) (0x0000 + (port) * 2) /* Direction 16-bit */ #define RZA2_PODR(port) (0x0040 + (port)) /* Output Data 8-bit */ #define RZA2_PIDR(port) (0x0060 + (port)) /* Input Data 8-bit */ #define RZA2_PMR(port) (0x0080 + (port)) /* Mode 8-bit */ #define RZA2_DSCR(port) (0x0140 + (port) * 2) /* Drive 16-bit */ #define RZA2_PFS(port, pin) (0x0200 + ((port) * 8) + (pin)) /* Fnct 8-bit */ #define RZA2_PWPR 0x02ff /* Write Protect 8-bit */ #define RZA2_PFENET 0x0820 /* Ethernet Pins 8-bit */ #define RZA2_PPOC 0x0900 /* Dedicated Pins 32-bit */ #define RZA2_PHMOMO 0x0980 /* Peripheral Pins 32-bit */ #define RZA2_PCKIO 0x09d0 /* CKIO Drive 8-bit */ #define RZA2_PDR_INPUT 0x02 #define RZA2_PDR_OUTPUT 0x03 #define RZA2_PDR_MASK 0x03 #define PWPR_B0WI BIT(7) /* Bit Write Disable */ #define PWPR_PFSWE BIT(6) /* PFS Register Write Enable */ #define PFS_ISEL BIT(6) /* Interrupt Select */ static void rza2_set_pin_function(void __iomem *pfc_base, u8 port, u8 pin, u8 func) { u16 mask16; u16 reg16; u8 reg8; /* Set pin to 'Non-use (Hi-z input protection)' */ reg16 = readw(pfc_base + RZA2_PDR(port)); mask16 = RZA2_PDR_MASK << (pin * 2); reg16 &= ~mask16; writew(reg16, pfc_base + RZA2_PDR(port)); /* Temporarily switch to GPIO */ reg8 = readb(pfc_base + RZA2_PMR(port)); reg8 &= ~BIT(pin); writeb(reg8, pfc_base + RZA2_PMR(port)); /* PFS Register Write Protect : OFF */ writeb(0x00, pfc_base + RZA2_PWPR); /* B0WI=0, PFSWE=0 */ writeb(PWPR_PFSWE, pfc_base + RZA2_PWPR); /* B0WI=0, PFSWE=1 */ /* Set Pin function (interrupt disabled, ISEL=0) */ writeb(func, pfc_base + RZA2_PFS(port, pin)); /* PFS Register Write Protect : ON */ writeb(0x00, pfc_base + RZA2_PWPR); /* B0WI=0, PFSWE=0 */ writeb(0x80, pfc_base + RZA2_PWPR); /* B0WI=1, PFSWE=0 */ /* Port Mode : Peripheral module pin functions */ reg8 = readb(pfc_base + RZA2_PMR(port)); reg8 |= BIT(pin); writeb(reg8, pfc_base + RZA2_PMR(port)); } static void rza2_pin_to_gpio(void __iomem *pfc_base, unsigned int offset, u8 dir) { u8 port = RZA2_PIN_ID_TO_PORT(offset); u8 pin = RZA2_PIN_ID_TO_PIN(offset); u16 mask16; u16 reg16; reg16 = readw(pfc_base + RZA2_PDR(port)); mask16 = RZA2_PDR_MASK << (pin * 2); reg16 &= ~mask16; if (dir) reg16 |= RZA2_PDR_INPUT << (pin * 2); /* pin as input */ else reg16 |= RZA2_PDR_OUTPUT << (pin * 2); /* pin as output */ writew(reg16, pfc_base + RZA2_PDR(port)); } static int rza2_chip_get_direction(struct gpio_chip *chip, unsigned int offset) { struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); u8 port = RZA2_PIN_ID_TO_PORT(offset); u8 pin = RZA2_PIN_ID_TO_PIN(offset); u16 reg16; reg16 = readw(priv->base + RZA2_PDR(port)); reg16 = (reg16 >> (pin * 2)) & RZA2_PDR_MASK; if (reg16 == RZA2_PDR_OUTPUT) return 0; if (reg16 == RZA2_PDR_INPUT) return 1; /* * This GPIO controller has a default Hi-Z state that is not input or * output, so force the pin to input now. */ rza2_pin_to_gpio(priv->base, offset, 1); return 1; } static int rza2_chip_direction_input(struct gpio_chip *chip, unsigned int offset) { struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); rza2_pin_to_gpio(priv->base, offset, 1); return 0; } static int rza2_chip_get(struct gpio_chip *chip, unsigned int offset) { struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); u8 port = RZA2_PIN_ID_TO_PORT(offset); u8 pin = RZA2_PIN_ID_TO_PIN(offset); return !!(readb(priv->base + RZA2_PIDR(port)) & BIT(pin)); } static void rza2_chip_set(struct gpio_chip *chip, unsigned int offset, int value) { struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); u8 port = RZA2_PIN_ID_TO_PORT(offset); u8 pin = RZA2_PIN_ID_TO_PIN(offset); u8 new_value; new_value = readb(priv->base + RZA2_PODR(port)); if (value) new_value |= BIT(pin); else new_value &= ~BIT(pin); writeb(new_value, priv->base + RZA2_PODR(port)); } static int rza2_chip_direction_output(struct gpio_chip *chip, unsigned int offset, int val) { struct rza2_pinctrl_priv *priv = gpiochip_get_data(chip); rza2_chip_set(chip, offset, val); rza2_pin_to_gpio(priv->base, offset, 0); return 0; } static const char * const rza2_gpio_names[] = { "P0_0", "P0_1", "P0_2", "P0_3", "P0_4", "P0_5", "P0_6", "P0_7", "P1_0", "P1_1", "P1_2", "P1_3", "P1_4", "P1_5", "P1_6", "P1_7", "P2_0", "P2_1", "P2_2", "P2_3", "P2_4", "P2_5", "P2_6", "P2_7", "P3_0", "P3_1", "P3_2", "P3_3", "P3_4", "P3_5", "P3_6", "P3_7", "P4_0", "P4_1", "P4_2", "P4_3", "P4_4", "P4_5", "P4_6", "P4_7", "P5_0", "P5_1", "P5_2", "P5_3", "P5_4", "P5_5", "P5_6", "P5_7", "P6_0", "P6_1", "P6_2", "P6_3", "P6_4", "P6_5", "P6_6", "P6_7", "P7_0", "P7_1", "P7_2", "P7_3", "P7_4", "P7_5", "P7_6", "P7_7", "P8_0", "P8_1", "P8_2", "P8_3", "P8_4", "P8_5", "P8_6", "P8_7", "P9_0", "P9_1", "P9_2", "P9_3", "P9_4", "P9_5", "P9_6", "P9_7", "PA_0", "PA_1", "PA_2", "PA_3", "PA_4", "PA_5", "PA_6", "PA_7", "PB_0", "PB_1", "PB_2", "PB_3", "PB_4", "PB_5", "PB_6", "PB_7", "PC_0", "PC_1", "PC_2", "PC_3", "PC_4", "PC_5", "PC_6", "PC_7", "PD_0", "PD_1", "PD_2", "PD_3", "PD_4", "PD_5", "PD_6", "PD_7", "PE_0", "PE_1", "PE_2", "PE_3", "PE_4", "PE_5", "PE_6", "PE_7", "PF_0", "PF_1", "PF_2", "PF_3", "PF_4", "PF_5", "PF_6", "PF_7", "PG_0", "PG_1", "PG_2", "PG_3", "PG_4", "PG_5", "PG_6", "PG_7", "PH_0", "PH_1", "PH_2", "PH_3", "PH_4", "PH_5", "PH_6", "PH_7", /* port I does not exist */ "PJ_0", "PJ_1", "PJ_2", "PJ_3", "PJ_4", "PJ_5", "PJ_6", "PJ_7", "PK_0", "PK_1", "PK_2", "PK_3", "PK_4", "PK_5", "PK_6", "PK_7", "PL_0", "PL_1", "PL_2", "PL_3", "PL_4", "PL_5", "PL_6", "PL_7", "PM_0", "PM_1", "PM_2", "PM_3", "PM_4", "PM_5", "PM_6", "PM_7", }; static struct gpio_chip chip = { .names = rza2_gpio_names, .base = -1, .get_direction = rza2_chip_get_direction, .direction_input = rza2_chip_direction_input, .direction_output = rza2_chip_direction_output, .get = rza2_chip_get, .set = rza2_chip_set, }; static int rza2_gpio_register(struct rza2_pinctrl_priv *priv) { struct device_node *np = priv->dev->of_node; struct of_phandle_args of_args; int ret; chip.label = devm_kasprintf(priv->dev, GFP_KERNEL, "%pOFn", np); chip.of_node = np; chip.parent = priv->dev; chip.ngpio = priv->npins; ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &of_args); if (ret) { dev_err(priv->dev, "Unable to parse gpio-ranges\n"); return ret; } if ((of_args.args[0] != 0) || (of_args.args[1] != 0) || (of_args.args[2] != priv->npins)) { dev_err(priv->dev, "gpio-ranges does not match selected SOC\n"); return -EINVAL; } priv->gpio_range.id = 0; priv->gpio_range.pin_base = priv->gpio_range.base = 0; priv->gpio_range.npins = priv->npins; priv->gpio_range.name = chip.label; priv->gpio_range.gc = &chip; /* Register our gpio chip with gpiolib */ ret = devm_gpiochip_add_data(priv->dev, &chip, priv); if (ret) return ret; /* Register pin range with pinctrl core */ pinctrl_add_gpio_range(priv->pctl, &priv->gpio_range); dev_dbg(priv->dev, "Registered gpio controller\n"); return 0; } static int rza2_pinctrl_register(struct rza2_pinctrl_priv *priv) { struct pinctrl_pin_desc *pins; unsigned int i; int ret; pins = devm_kcalloc(priv->dev, priv->npins, sizeof(*pins), GFP_KERNEL); if (!pins) return -ENOMEM; priv->pins = pins; priv->desc.pins = pins; priv->desc.npins = priv->npins; for (i = 0; i < priv->npins; i++) { pins[i].number = i; pins[i].name = rza2_gpio_names[i]; } ret = devm_pinctrl_register_and_init(priv->dev, &priv->desc, priv, &priv->pctl); if (ret) { dev_err(priv->dev, "pinctrl registration failed\n"); return ret; } ret = pinctrl_enable(priv->pctl); if (ret) { dev_err(priv->dev, "pinctrl enable failed\n"); return ret; } ret = rza2_gpio_register(priv); if (ret) { dev_err(priv->dev, "GPIO registration failed\n"); return ret; } return 0; } /* * For each DT node, create a single pin mapping. That pin mapping will only * contain a single group of pins, and that group of pins will only have a * single function that can be selected. */ static int rza2_dt_node_to_map(struct pinctrl_dev *pctldev, struct device_node *np, struct pinctrl_map **map, unsigned int *num_maps) { struct rza2_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev); unsigned int *pins, *psel_val; int i, ret, npins, gsel, fsel; struct property *of_pins; const char **pin_fn; /* Find out how many pins to map */ of_pins = of_find_property(np, "pinmux", NULL); if (!of_pins) { dev_info(priv->dev, "Missing pinmux property\n"); return -ENOENT; } npins = of_pins->length / sizeof(u32); pins = devm_kcalloc(priv->dev, npins, sizeof(*pins), GFP_KERNEL); psel_val = devm_kcalloc(priv->dev, npins, sizeof(*psel_val), GFP_KERNEL); pin_fn = devm_kzalloc(priv->dev, sizeof(*pin_fn), GFP_KERNEL); if (!pins || !psel_val || !pin_fn) return -ENOMEM; /* Collect pin locations and mux settings from DT properties */ for (i = 0; i < npins; ++i) { u32 value; ret = of_property_read_u32_index(np, "pinmux", i, &value); if (ret) return ret; pins[i] = value & MUX_PIN_ID_MASK; psel_val[i] = MUX_FUNC(value); } /* Register a single pin group listing all the pins we read from DT */ gsel = pinctrl_generic_add_group(pctldev, np->name, pins, npins, NULL); if (gsel < 0) return gsel; /* * Register a single group function where the 'data' is an array PSEL * register values read from DT. */ pin_fn[0] = np->name; fsel = pinmux_generic_add_function(pctldev, np->name, pin_fn, 1, psel_val); if (fsel < 0) { ret = fsel; goto remove_group; } dev_dbg(priv->dev, "Parsed %pOF with %d pins\n", np, npins); /* Create map where to retrieve function and mux settings from */ *num_maps = 0; *map = kzalloc(sizeof(**map), GFP_KERNEL); if (!*map) { ret = -ENOMEM; goto remove_function; } (*map)->type = PIN_MAP_TYPE_MUX_GROUP; (*map)->data.mux.group = np->name; (*map)->data.mux.function = np->name; *num_maps = 1; return 0; remove_function: pinmux_generic_remove_function(pctldev, fsel); remove_group: pinctrl_generic_remove_group(pctldev, gsel); dev_err(priv->dev, "Unable to parse DT node %s\n", np->name); return ret; } static void rza2_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned int num_maps) { kfree(map); } static const struct pinctrl_ops rza2_pinctrl_ops = { .get_groups_count = pinctrl_generic_get_group_count, .get_group_name = pinctrl_generic_get_group_name, .get_group_pins = pinctrl_generic_get_group_pins, .dt_node_to_map = rza2_dt_node_to_map, .dt_free_map = rza2_dt_free_map, }; static int rza2_set_mux(struct pinctrl_dev *pctldev, unsigned int selector, unsigned int group) { struct rza2_pinctrl_priv *priv = pinctrl_dev_get_drvdata(pctldev); struct function_desc *func; unsigned int i, *psel_val; struct group_desc *grp; grp = pinctrl_generic_get_group(pctldev, group); if (!grp) return -EINVAL; func = pinmux_generic_get_function(pctldev, selector); if (!func) return -EINVAL; psel_val = func->data; for (i = 0; i < grp->num_pins; ++i) { dev_dbg(priv->dev, "Setting P%c_%d to PSEL=%d\n", port_names[RZA2_PIN_ID_TO_PORT(grp->pins[i])], RZA2_PIN_ID_TO_PIN(grp->pins[i]), psel_val[i]); rza2_set_pin_function( priv->base, RZA2_PIN_ID_TO_PORT(grp->pins[i]), RZA2_PIN_ID_TO_PIN(grp->pins[i]), psel_val[i]); } return 0; } static const struct pinmux_ops rza2_pinmux_ops = { .get_functions_count = pinmux_generic_get_function_count, .get_function_name = pinmux_generic_get_function_name, .get_function_groups = pinmux_generic_get_function_groups, .set_mux = rza2_set_mux, .strict = true, }; static int rza2_pinctrl_probe(struct platform_device *pdev) { struct rza2_pinctrl_priv *priv; struct resource *res; int ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->dev = &pdev->dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->base)) return PTR_ERR(priv->base); platform_set_drvdata(pdev, priv); priv->npins = (int)(uintptr_t)of_device_get_match_data(&pdev->dev) * RZA2_PINS_PER_PORT; priv->desc.name = DRIVER_NAME; priv->desc.pctlops = &rza2_pinctrl_ops; priv->desc.pmxops = &rza2_pinmux_ops; priv->desc.owner = THIS_MODULE; ret = rza2_pinctrl_register(priv); if (ret) return ret; dev_info(&pdev->dev, "Registered ports P0 - P%c\n", port_names[priv->desc.npins / RZA2_PINS_PER_PORT - 1]); return 0; } static const struct of_device_id rza2_pinctrl_of_match[] = { { .compatible = "renesas,r7s9210-pinctrl", .data = (void *)22, }, { /* sentinel */ } }; static struct platform_driver rza2_pinctrl_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = rza2_pinctrl_of_match, }, .probe = rza2_pinctrl_probe, }; static int __init rza2_pinctrl_init(void) { return platform_driver_register(&rza2_pinctrl_driver); } core_initcall(rza2_pinctrl_init); MODULE_AUTHOR("Chris Brandt "); MODULE_DESCRIPTION("Pin and gpio controller driver for RZ/A2 SoC"); MODULE_LICENSE("GPL v2");