// SPDX-License-Identifier: GPL-2.0 /* Author: Dan Scally */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" /* * 79234640-9e10-4fea-a5c1-b5aa8b19756f * This _DSM GUID returns information about the GPIO lines mapped to a * discrete INT3472 device. Function number 1 returns a count of the GPIO * lines that are mapped. Subsequent functions return 32 bit ints encoding * information about the GPIO line, including its purpose. */ static const guid_t int3472_gpio_guid = GUID_INIT(0x79234640, 0x9e10, 0x4fea, 0xa5, 0xc1, 0xb5, 0xaa, 0x8b, 0x19, 0x75, 0x6f); /* * 822ace8f-2814-4174-a56b-5f029fe079ee * This _DSM GUID returns a string from the sensor device, which acts as a * module identifier. */ static const guid_t cio2_sensor_module_guid = GUID_INIT(0x822ace8f, 0x2814, 0x4174, 0xa5, 0x6b, 0x5f, 0x02, 0x9f, 0xe0, 0x79, 0xee); /* * Here follows platform specific mapping information that we can pass to * the functions mapping resources to the sensors. Where the sensors have * a power enable pin defined in DSDT we need to provide a supply name so * the sensor drivers can find the regulator. The device name will be derived * from the sensor's ACPI device within the code. Optionally, we can provide a * NULL terminated array of function name mappings to deal with any platform * specific deviations from the documented behaviour of GPIOs. * * Map a GPIO function name to NULL to prevent the driver from mapping that * GPIO at all. */ static const struct int3472_gpio_function_remap ov2680_gpio_function_remaps[] = { { "reset", NULL }, { "powerdown", "reset" }, { } }; static const struct int3472_sensor_config int3472_sensor_configs[] = { /* Lenovo Miix 510-12ISK - OV2680, Front */ { "GNDF140809R", { 0 }, ov2680_gpio_function_remaps }, /* Lenovo Miix 510-12ISK - OV5648, Rear */ { "GEFF150023R", REGULATOR_SUPPLY("avdd", NULL), NULL }, /* Surface Go 1&2 - OV5693, Front */ { "YHCU", REGULATOR_SUPPLY("avdd", NULL), NULL }, }; static const struct int3472_sensor_config * skl_int3472_get_sensor_module_config(struct int3472_discrete_device *int3472) { union acpi_object *obj; unsigned int i; obj = acpi_evaluate_dsm_typed(int3472->sensor->handle, &cio2_sensor_module_guid, 0x00, 0x01, NULL, ACPI_TYPE_STRING); if (!obj) { dev_err(int3472->dev, "Failed to get sensor module string from _DSM\n"); return ERR_PTR(-ENODEV); } if (obj->string.type != ACPI_TYPE_STRING) { dev_err(int3472->dev, "Sensor _DSM returned a non-string value\n"); ACPI_FREE(obj); return ERR_PTR(-EINVAL); } for (i = 0; i < ARRAY_SIZE(int3472_sensor_configs); i++) { if (!strcmp(int3472_sensor_configs[i].sensor_module_name, obj->string.pointer)) break; } ACPI_FREE(obj); if (i >= ARRAY_SIZE(int3472_sensor_configs)) return ERR_PTR(-EINVAL); return &int3472_sensor_configs[i]; } static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472, struct acpi_resource_gpio *agpio, const char *func, u32 polarity) { const struct int3472_sensor_config *sensor_config; char *path = agpio->resource_source.string_ptr; struct gpiod_lookup *table_entry; struct acpi_device *adev; acpi_handle handle; acpi_status status; int ret; if (int3472->n_sensor_gpios >= INT3472_MAX_SENSOR_GPIOS) { dev_warn(int3472->dev, "Too many GPIOs mapped\n"); return -EINVAL; } sensor_config = int3472->sensor_config; if (!IS_ERR(sensor_config) && sensor_config->function_maps) { const struct int3472_gpio_function_remap *remap; for (remap = sensor_config->function_maps; remap->documented; remap++) { if (!strcmp(func, remap->documented)) { func = remap->actual; break; } } } /* Functions mapped to NULL should not be mapped to the sensor */ if (!func) return 0; status = acpi_get_handle(NULL, path, &handle); if (ACPI_FAILURE(status)) return -EINVAL; ret = acpi_bus_get_device(handle, &adev); if (ret) return -ENODEV; table_entry = &int3472->gpios.table[int3472->n_sensor_gpios]; table_entry->key = acpi_dev_name(adev); table_entry->chip_hwnum = agpio->pin_table[0]; table_entry->con_id = func; table_entry->idx = 0; table_entry->flags = polarity; int3472->n_sensor_gpios++; return 0; } static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472, struct acpi_resource_gpio *agpio, u8 type) { char *path = agpio->resource_source.string_ptr; u16 pin = agpio->pin_table[0]; struct gpio_desc *gpio; switch (type) { case INT3472_GPIO_TYPE_CLK_ENABLE: gpio = acpi_get_and_request_gpiod(path, pin, "int3472,clk-enable"); if (IS_ERR(gpio)) return (PTR_ERR(gpio)); int3472->clock.ena_gpio = gpio; break; case INT3472_GPIO_TYPE_PRIVACY_LED: gpio = acpi_get_and_request_gpiod(path, pin, "int3472,privacy-led"); if (IS_ERR(gpio)) return (PTR_ERR(gpio)); int3472->clock.led_gpio = gpio; break; default: dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type); break; } return 0; } /** * skl_int3472_handle_gpio_resources: Map PMIC resources to consuming sensor * @ares: A pointer to a &struct acpi_resource * @data: A pointer to a &struct int3472_discrete_device * * This function handles GPIO resources that are against an INT3472 * ACPI device, by checking the value of the corresponding _DSM entry. * This will return a 32bit int, where the lowest byte represents the * function of the GPIO pin: * * 0x00 Reset * 0x01 Power down * 0x0b Power enable * 0x0c Clock enable * 0x0d Privacy LED * * There are some known platform specific quirks where that does not quite * hold up; for example where a pin with type 0x01 (Power down) is mapped to * a sensor pin that performs a reset function or entries in _CRS and _DSM that * do not actually correspond to a physical connection. These will be handled * by the mapping sub-functions. * * GPIOs will either be mapped directly to the sensor device or else used * to create clocks and regulators via the usual frameworks. * * Return: * * 1 - To continue the loop * * 0 - When all resources found are handled properly. * * -EINVAL - If the resource is not a GPIO IO resource * * -ENODEV - If the resource has no corresponding _DSM entry * * -Other - Errors propagated from one of the sub-functions. */ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, void *data) { struct int3472_discrete_device *int3472 = data; struct acpi_resource_gpio *agpio; union acpi_object *obj; const char *err_msg; int ret; u8 type; if (!acpi_gpio_get_io_resource(ares, &agpio)) return 1; /* * ngpios + 2 because the index of this _DSM function is 1-based and * the first function is just a count. */ obj = acpi_evaluate_dsm_typed(int3472->adev->handle, &int3472_gpio_guid, 0x00, int3472->ngpios + 2, NULL, ACPI_TYPE_INTEGER); if (!obj) { dev_warn(int3472->dev, "No _DSM entry for GPIO pin %u\n", agpio->pin_table[0]); return 1; } type = obj->integer.value & 0xff; switch (type) { case INT3472_GPIO_TYPE_RESET: ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "reset", GPIO_ACTIVE_LOW); if (ret) err_msg = "Failed to map reset pin to sensor\n"; break; case INT3472_GPIO_TYPE_POWERDOWN: ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, "powerdown", GPIO_ACTIVE_LOW); if (ret) err_msg = "Failed to map powerdown pin to sensor\n"; break; case INT3472_GPIO_TYPE_CLK_ENABLE: case INT3472_GPIO_TYPE_PRIVACY_LED: ret = skl_int3472_map_gpio_to_clk(int3472, agpio, type); if (ret) err_msg = "Failed to map GPIO to clock\n"; break; case INT3472_GPIO_TYPE_POWER_ENABLE: ret = skl_int3472_register_regulator(int3472, agpio); if (ret) err_msg = "Failed to map regulator to sensor\n"; break; default: dev_warn(int3472->dev, "GPIO type 0x%02x unknown; the sensor may not work\n", type); ret = 1; break; } int3472->ngpios++; ACPI_FREE(obj); if (ret < 0) return dev_err_probe(int3472->dev, ret, err_msg); return ret; } static int skl_int3472_parse_crs(struct int3472_discrete_device *int3472) { LIST_HEAD(resource_list); int ret; /* * No error check, because not having a sensor config is not necessarily * a failure mode. */ int3472->sensor_config = skl_int3472_get_sensor_module_config(int3472); ret = acpi_dev_get_resources(int3472->adev, &resource_list, skl_int3472_handle_gpio_resources, int3472); if (ret < 0) return ret; acpi_dev_free_resource_list(&resource_list); /* * If we find no clock enable GPIO pin then the privacy LED won't work. * We've never seen that situation, but it's possible. Warn the user so * it's clear what's happened. */ if (int3472->clock.ena_gpio) { ret = skl_int3472_register_clock(int3472); if (ret) return ret; } else { if (int3472->clock.led_gpio) dev_warn(int3472->dev, "No clk GPIO. The privacy LED won't work\n"); } int3472->gpios.dev_id = int3472->sensor_name; gpiod_add_lookup_table(&int3472->gpios); return 0; } static int skl_int3472_discrete_remove(struct platform_device *pdev); static int skl_int3472_discrete_probe(struct platform_device *pdev) { struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); struct int3472_discrete_device *int3472; struct int3472_cldb cldb; int ret; ret = skl_int3472_fill_cldb(adev, &cldb); if (ret) { dev_err(&pdev->dev, "Couldn't fill CLDB structure\n"); return ret; } if (cldb.control_logic_type != 1) { dev_err(&pdev->dev, "Unsupported control logic type %u\n", cldb.control_logic_type); return -EINVAL; } /* Max num GPIOs we've seen plus a terminator */ int3472 = devm_kzalloc(&pdev->dev, struct_size(int3472, gpios.table, INT3472_MAX_SENSOR_GPIOS + 1), GFP_KERNEL); if (!int3472) return -ENOMEM; int3472->adev = adev; int3472->dev = &pdev->dev; platform_set_drvdata(pdev, int3472); ret = skl_int3472_get_sensor_adev_and_name(&pdev->dev, &int3472->sensor, &int3472->sensor_name); if (ret) return ret; /* * Initialising this list means we can call gpiod_remove_lookup_table() * in failure paths without issue. */ INIT_LIST_HEAD(&int3472->gpios.list); ret = skl_int3472_parse_crs(int3472); if (ret) { skl_int3472_discrete_remove(pdev); return ret; } acpi_dev_clear_dependencies(adev); return 0; } static int skl_int3472_discrete_remove(struct platform_device *pdev) { struct int3472_discrete_device *int3472 = platform_get_drvdata(pdev); gpiod_remove_lookup_table(&int3472->gpios); if (int3472->clock.cl) skl_int3472_unregister_clock(int3472); gpiod_put(int3472->clock.ena_gpio); gpiod_put(int3472->clock.led_gpio); skl_int3472_unregister_regulator(int3472); return 0; } static const struct acpi_device_id int3472_device_id[] = { { "INT3472", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, int3472_device_id); static struct platform_driver int3472_discrete = { .driver = { .name = "int3472-discrete", .acpi_match_table = int3472_device_id, }, .probe = skl_int3472_discrete_probe, .remove = skl_int3472_discrete_remove, }; module_platform_driver(int3472_discrete); MODULE_DESCRIPTION("Intel SkyLake INT3472 ACPI Discrete Device Driver"); MODULE_AUTHOR("Daniel Scally "); MODULE_LICENSE("GPL v2");