/* * linux/drivers/s390/crypto/zcrypt_pcixcc.c * * zcrypt 2.1.0 * * Copyright (C) 2001, 2006 IBM Corporation * Author(s): Robert Burroughs * Eric Rossman (edrossma@us.ibm.com) * * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com) * Major cleanup & driver split: Martin Schwidefsky * Ralph Wuerthner * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include "ap_bus.h" #include "zcrypt_api.h" #include "zcrypt_error.h" #include "zcrypt_pcicc.h" #include "zcrypt_pcixcc.h" #include "zcrypt_cca_key.h" #define PCIXCC_MIN_MOD_SIZE 16 /* 128 bits */ #define PCIXCC_MIN_MOD_SIZE_OLD 64 /* 512 bits */ #define PCIXCC_MAX_MOD_SIZE 256 /* 2048 bits */ #define PCIXCC_MCL2_SPEED_RATING 7870 /* FIXME: needs finetuning */ #define PCIXCC_MCL3_SPEED_RATING 7870 #define CEX2C_SPEED_RATING 8540 #define PCIXCC_MAX_ICA_MESSAGE_SIZE 0x77c /* max size type6 v2 crt message */ #define PCIXCC_MAX_ICA_RESPONSE_SIZE 0x77c /* max size type86 v2 reply */ #define PCIXCC_MAX_XCRB_MESSAGE_SIZE (12*1024) #define PCIXCC_MAX_XCRB_RESPONSE_SIZE PCIXCC_MAX_XCRB_MESSAGE_SIZE #define PCIXCC_MAX_XCRB_DATA_SIZE (11*1024) #define PCIXCC_MAX_XCRB_REPLY_SIZE (5*1024) #define PCIXCC_MAX_RESPONSE_SIZE PCIXCC_MAX_XCRB_RESPONSE_SIZE #define PCIXCC_CLEANUP_TIME (15*HZ) #define CEIL4(x) ((((x)+3)/4)*4) struct response_type { struct completion work; int type; }; #define PCIXCC_RESPONSE_TYPE_ICA 0 #define PCIXCC_RESPONSE_TYPE_XCRB 1 static struct ap_device_id zcrypt_pcixcc_ids[] = { { AP_DEVICE(AP_DEVICE_TYPE_PCIXCC) }, { AP_DEVICE(AP_DEVICE_TYPE_CEX2C) }, { /* end of list */ }, }; #ifndef CONFIG_ZCRYPT_MONOLITHIC MODULE_DEVICE_TABLE(ap, zcrypt_pcixcc_ids); MODULE_AUTHOR("IBM Corporation"); MODULE_DESCRIPTION("PCIXCC Cryptographic Coprocessor device driver, " "Copyright 2001, 2006 IBM Corporation"); MODULE_LICENSE("GPL"); #endif static int zcrypt_pcixcc_probe(struct ap_device *ap_dev); static void zcrypt_pcixcc_remove(struct ap_device *ap_dev); static void zcrypt_pcixcc_receive(struct ap_device *, struct ap_message *, struct ap_message *); static struct ap_driver zcrypt_pcixcc_driver = { .probe = zcrypt_pcixcc_probe, .remove = zcrypt_pcixcc_remove, .receive = zcrypt_pcixcc_receive, .ids = zcrypt_pcixcc_ids, }; /** * The following is used to initialize the CPRBX passed to the PCIXCC/CEX2C * card in a type6 message. The 3 fields that must be filled in at execution * time are req_parml, rpl_parml and usage_domain. * Everything about this interface is ascii/big-endian, since the * device does *not* have 'Intel inside'. * * The CPRBX is followed immediately by the parm block. * The parm block contains: * - function code ('PD' 0x5044 or 'PK' 0x504B) * - rule block (one of:) * + 0x000A 'PKCS-1.2' (MCL2 'PD') * + 0x000A 'ZERO-PAD' (MCL2 'PK') * + 0x000A 'ZERO-PAD' (MCL3 'PD' or CEX2C 'PD') * + 0x000A 'MRP ' (MCL3 'PK' or CEX2C 'PK') * - VUD block */ static struct CPRBX static_cprbx = { .cprb_len = 0x00DC, .cprb_ver_id = 0x02, .func_id = {0x54,0x32}, }; /** * Convert a ICAMEX message to a type6 MEX message. * * @zdev: crypto device pointer * @ap_msg: pointer to AP message * @mex: pointer to user input data * * Returns 0 on success or -EFAULT. */ static int ICAMEX_msg_to_type6MEX_msgX(struct zcrypt_device *zdev, struct ap_message *ap_msg, struct ica_rsa_modexpo *mex) { static struct type6_hdr static_type6_hdrX = { .type = 0x06, .offset1 = 0x00000058, .agent_id = {'C','A',}, .function_code = {'P','K'}, }; static struct function_and_rules_block static_pke_fnr = { .function_code = {'P','K'}, .ulen = 10, .only_rule = {'M','R','P',' ',' ',' ',' ',' '} }; static struct function_and_rules_block static_pke_fnr_MCL2 = { .function_code = {'P','K'}, .ulen = 10, .only_rule = {'Z','E','R','O','-','P','A','D'} }; struct { struct type6_hdr hdr; struct CPRBX cprbx; struct function_and_rules_block fr; unsigned short length; char text[0]; } __attribute__((packed)) *msg = ap_msg->message; int size; /* VUD.ciphertext */ msg->length = mex->inputdatalength + 2; if (copy_from_user(msg->text, mex->inputdata, mex->inputdatalength)) return -EFAULT; /* Set up key which is located after the variable length text. */ size = zcrypt_type6_mex_key_en(mex, msg->text+mex->inputdatalength, 1); if (size < 0) return size; size += sizeof(*msg) + mex->inputdatalength; /* message header, cprbx and f&r */ msg->hdr = static_type6_hdrX; msg->hdr.ToCardLen1 = size - sizeof(msg->hdr); msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr); msg->cprbx = static_cprbx; msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid); msg->cprbx.rpl_msgbl = msg->hdr.FromCardLen1; msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ? static_pke_fnr_MCL2 : static_pke_fnr; msg->cprbx.req_parml = size - sizeof(msg->hdr) - sizeof(msg->cprbx); ap_msg->length = size; return 0; } /** * Convert a ICACRT message to a type6 CRT message. * * @zdev: crypto device pointer * @ap_msg: pointer to AP message * @crt: pointer to user input data * * Returns 0 on success or -EFAULT. */ static int ICACRT_msg_to_type6CRT_msgX(struct zcrypt_device *zdev, struct ap_message *ap_msg, struct ica_rsa_modexpo_crt *crt) { static struct type6_hdr static_type6_hdrX = { .type = 0x06, .offset1 = 0x00000058, .agent_id = {'C','A',}, .function_code = {'P','D'}, }; static struct function_and_rules_block static_pkd_fnr = { .function_code = {'P','D'}, .ulen = 10, .only_rule = {'Z','E','R','O','-','P','A','D'} }; static struct function_and_rules_block static_pkd_fnr_MCL2 = { .function_code = {'P','D'}, .ulen = 10, .only_rule = {'P','K','C','S','-','1','.','2'} }; struct { struct type6_hdr hdr; struct CPRBX cprbx; struct function_and_rules_block fr; unsigned short length; char text[0]; } __attribute__((packed)) *msg = ap_msg->message; int size; /* VUD.ciphertext */ msg->length = crt->inputdatalength + 2; if (copy_from_user(msg->text, crt->inputdata, crt->inputdatalength)) return -EFAULT; /* Set up key which is located after the variable length text. */ size = zcrypt_type6_crt_key(crt, msg->text + crt->inputdatalength, 1); if (size < 0) return size; size += sizeof(*msg) + crt->inputdatalength; /* total size of msg */ /* message header, cprbx and f&r */ msg->hdr = static_type6_hdrX; msg->hdr.ToCardLen1 = size - sizeof(msg->hdr); msg->hdr.FromCardLen1 = PCIXCC_MAX_ICA_RESPONSE_SIZE - sizeof(msg->hdr); msg->cprbx = static_cprbx; msg->cprbx.domain = AP_QID_QUEUE(zdev->ap_dev->qid); msg->cprbx.req_parml = msg->cprbx.rpl_msgbl = size - sizeof(msg->hdr) - sizeof(msg->cprbx); msg->fr = (zdev->user_space_type == ZCRYPT_PCIXCC_MCL2) ? static_pkd_fnr_MCL2 : static_pkd_fnr; ap_msg->length = size; return 0; } /** * Convert a XCRB message to a type6 CPRB message. * * @zdev: crypto device pointer * @ap_msg: pointer to AP message * @xcRB: pointer to user input data * * Returns 0 on success or -EFAULT. */ struct type86_fmt2_msg { struct type86_hdr hdr; struct type86_fmt2_ext fmt2; } __attribute__((packed)); static int XCRB_msg_to_type6CPRB_msgX(struct zcrypt_device *zdev, struct ap_message *ap_msg, struct ica_xcRB *xcRB) { static struct type6_hdr static_type6_hdrX = { .type = 0x06, .offset1 = 0x00000058, }; struct { struct type6_hdr hdr; struct ica_CPRBX cprbx; } __attribute__((packed)) *msg = ap_msg->message; int rcblen = CEIL4(xcRB->request_control_blk_length); int replylen; char *req_data = ap_msg->message + sizeof(struct type6_hdr) + rcblen; char *function_code; /* length checks */ ap_msg->length = sizeof(struct type6_hdr) + CEIL4(xcRB->request_control_blk_length) + xcRB->request_data_length; if (ap_msg->length > PCIXCC_MAX_XCRB_MESSAGE_SIZE) { PRINTK("Combined message is too large (%ld/%d/%d).\n", sizeof(struct type6_hdr), xcRB->request_control_blk_length, xcRB->request_data_length); return -EFAULT; } if (CEIL4(xcRB->reply_control_blk_length) > PCIXCC_MAX_XCRB_REPLY_SIZE) { PDEBUG("Reply CPRB length is too large (%d).\n", xcRB->request_control_blk_length); return -EFAULT; } if (CEIL4(xcRB->reply_data_length) > PCIXCC_MAX_XCRB_DATA_SIZE) { PDEBUG("Reply data block length is too large (%d).\n", xcRB->reply_data_length); return -EFAULT; } replylen = CEIL4(xcRB->reply_control_blk_length) + CEIL4(xcRB->reply_data_length) + sizeof(struct type86_fmt2_msg); if (replylen > PCIXCC_MAX_XCRB_RESPONSE_SIZE) { PDEBUG("Reply CPRB + data block > PCIXCC_MAX_XCRB_RESPONSE_SIZE" " (%d/%d/%d).\n", sizeof(struct type86_fmt2_msg), xcRB->reply_control_blk_length, xcRB->reply_data_length); xcRB->reply_control_blk_length = PCIXCC_MAX_XCRB_RESPONSE_SIZE - (sizeof(struct type86_fmt2_msg) + CEIL4(xcRB->reply_data_length)); PDEBUG("Capping Reply CPRB length at %d\n", xcRB->reply_control_blk_length); } /* prepare type6 header */ msg->hdr = static_type6_hdrX; memcpy(msg->hdr.agent_id , &(xcRB->agent_ID), sizeof(xcRB->agent_ID)); msg->hdr.ToCardLen1 = xcRB->request_control_blk_length; if (xcRB->request_data_length) { msg->hdr.offset2 = msg->hdr.offset1 + rcblen; msg->hdr.ToCardLen2 = xcRB->request_data_length; } msg->hdr.FromCardLen1 = xcRB->reply_control_blk_length; msg->hdr.FromCardLen2 = xcRB->reply_data_length; /* prepare CPRB */ if (copy_from_user(&(msg->cprbx), xcRB->request_control_blk_addr, xcRB->request_control_blk_length)) return -EFAULT; if (msg->cprbx.cprb_len + sizeof(msg->hdr.function_code) > xcRB->request_control_blk_length) { PDEBUG("cprb_len too large (%d/%d)\n", msg->cprbx.cprb_len, xcRB->request_control_blk_length); return -EFAULT; } function_code = ((unsigned char *)&msg->cprbx) + msg->cprbx.cprb_len; memcpy(msg->hdr.function_code, function_code, sizeof(msg->hdr.function_code)); /* copy data block */ if (xcRB->request_data_length && copy_from_user(req_data, xcRB->request_data_address, xcRB->request_data_length)) return -EFAULT; return 0; } /** * Copy results from a type 86 ICA reply message back to user space. * * @zdev: crypto device pointer * @reply: reply AP message. * @data: pointer to user output data * @length: size of user output data * * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error. */ struct type86x_reply { struct type86_hdr hdr; struct type86_fmt2_ext fmt2; struct CPRBX cprbx; unsigned char pad[4]; /* 4 byte function code/rules block ? */ unsigned short length; char text[0]; } __attribute__((packed)); static int convert_type86_ica(struct zcrypt_device *zdev, struct ap_message *reply, char __user *outputdata, unsigned int outputdatalength) { static unsigned char static_pad[] = { 0x00,0x02, 0x1B,0x7B,0x5D,0xB5,0x75,0x01,0x3D,0xFD, 0x8D,0xD1,0xC7,0x03,0x2D,0x09,0x23,0x57, 0x89,0x49,0xB9,0x3F,0xBB,0x99,0x41,0x5B, 0x75,0x21,0x7B,0x9D,0x3B,0x6B,0x51,0x39, 0xBB,0x0D,0x35,0xB9,0x89,0x0F,0x93,0xA5, 0x0B,0x47,0xF1,0xD3,0xBB,0xCB,0xF1,0x9D, 0x23,0x73,0x71,0xFF,0xF3,0xF5,0x45,0xFB, 0x61,0x29,0x23,0xFD,0xF1,0x29,0x3F,0x7F, 0x17,0xB7,0x1B,0xA9,0x19,0xBD,0x57,0xA9, 0xD7,0x95,0xA3,0xCB,0xED,0x1D,0xDB,0x45, 0x7D,0x11,0xD1,0x51,0x1B,0xED,0x71,0xE9, 0xB1,0xD1,0xAB,0xAB,0x21,0x2B,0x1B,0x9F, 0x3B,0x9F,0xF7,0xF7,0xBD,0x63,0xEB,0xAD, 0xDF,0xB3,0x6F,0x5B,0xDB,0x8D,0xA9,0x5D, 0xE3,0x7D,0x77,0x49,0x47,0xF5,0xA7,0xFD, 0xAB,0x2F,0x27,0x35,0x77,0xD3,0x49,0xC9, 0x09,0xEB,0xB1,0xF9,0xBF,0x4B,0xCB,0x2B, 0xEB,0xEB,0x05,0xFF,0x7D,0xC7,0x91,0x8B, 0x09,0x83,0xB9,0xB9,0x69,0x33,0x39,0x6B, 0x79,0x75,0x19,0xBF,0xBB,0x07,0x1D,0xBD, 0x29,0xBF,0x39,0x95,0x93,0x1D,0x35,0xC7, 0xC9,0x4D,0xE5,0x97,0x0B,0x43,0x9B,0xF1, 0x16,0x93,0x03,0x1F,0xA5,0xFB,0xDB,0xF3, 0x27,0x4F,0x27,0x61,0x05,0x1F,0xB9,0x23, 0x2F,0xC3,0x81,0xA9,0x23,0x71,0x55,0x55, 0xEB,0xED,0x41,0xE5,0xF3,0x11,0xF1,0x43, 0x69,0x03,0xBD,0x0B,0x37,0x0F,0x51,0x8F, 0x0B,0xB5,0x89,0x5B,0x67,0xA9,0xD9,0x4F, 0x01,0xF9,0x21,0x77,0x37,0x73,0x79,0xC5, 0x7F,0x51,0xC1,0xCF,0x97,0xA1,0x75,0xAD, 0x35,0x9D,0xD3,0xD3,0xA7,0x9D,0x5D,0x41, 0x6F,0x65,0x1B,0xCF,0xA9,0x87,0x91,0x09 }; struct type86x_reply *msg = reply->message; unsigned short service_rc, service_rs; unsigned int reply_len, pad_len; char *data; service_rc = msg->cprbx.ccp_rtcode; if (unlikely(service_rc != 0)) { service_rs = msg->cprbx.ccp_rscode; if (service_rc == 8 && service_rs == 66) { PDEBUG("Bad block format on PCIXCC/CEX2C\n"); return -EINVAL; } if (service_rc == 8 && service_rs == 65) { PDEBUG("Probably an even modulus on PCIXCC/CEX2C\n"); return -EINVAL; } if (service_rc == 8 && service_rs == 770) { PDEBUG("Invalid key length on PCIXCC/CEX2C\n"); zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD; return -EAGAIN; } if (service_rc == 8 && service_rs == 783) { PDEBUG("Extended bitlengths not enabled on PCIXCC/CEX2C\n"); zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD; return -EAGAIN; } PRINTK("Unknown service rc/rs (PCIXCC/CEX2C): %d/%d\n", service_rc, service_rs); zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } data = msg->text; reply_len = msg->length - 2; if (reply_len > outputdatalength) return -EINVAL; /** * For all encipher requests, the length of the ciphertext (reply_len) * will always equal the modulus length. For MEX decipher requests * the output needs to get padded. Minimum pad size is 10. * * Currently, the cases where padding will be added is for: * - PCIXCC_MCL2 using a CRT form token (since PKD didn't support * ZERO-PAD and CRT is only supported for PKD requests) * - PCICC, always */ pad_len = outputdatalength - reply_len; if (pad_len > 0) { if (pad_len < 10) return -EINVAL; /* 'restore' padding left in the PCICC/PCIXCC card. */ if (copy_to_user(outputdata, static_pad, pad_len - 1)) return -EFAULT; if (put_user(0, outputdata + pad_len - 1)) return -EFAULT; } /* Copy the crypto response to user space. */ if (copy_to_user(outputdata + pad_len, data, reply_len)) return -EFAULT; return 0; } /** * Copy results from a type 86 XCRB reply message back to user space. * * @zdev: crypto device pointer * @reply: reply AP message. * @xcRB: pointer to XCRB * * Returns 0 on success or -EINVAL, -EFAULT, -EAGAIN in case of an error. */ static int convert_type86_xcrb(struct zcrypt_device *zdev, struct ap_message *reply, struct ica_xcRB *xcRB) { struct type86_fmt2_msg *msg = reply->message; char *data = reply->message; /* Copy CPRB to user */ if (copy_to_user(xcRB->reply_control_blk_addr, data + msg->fmt2.offset1, msg->fmt2.count1)) return -EFAULT; xcRB->reply_control_blk_length = msg->fmt2.count1; /* Copy data buffer to user */ if (msg->fmt2.count2) if (copy_to_user(xcRB->reply_data_addr, data + msg->fmt2.offset2, msg->fmt2.count2)) return -EFAULT; xcRB->reply_data_length = msg->fmt2.count2; return 0; } static int convert_response_ica(struct zcrypt_device *zdev, struct ap_message *reply, char __user *outputdata, unsigned int outputdatalength) { struct type86x_reply *msg = reply->message; /* Response type byte is the second byte in the response. */ switch (((unsigned char *) reply->message)[1]) { case TYPE82_RSP_CODE: case TYPE88_RSP_CODE: return convert_error(zdev, reply); case TYPE86_RSP_CODE: if (msg->hdr.reply_code) return convert_error(zdev, reply); if (msg->cprbx.cprb_ver_id == 0x02) return convert_type86_ica(zdev, reply, outputdata, outputdatalength); /* no break, incorrect cprb version is an unknown response */ default: /* Unknown response type, this should NEVER EVER happen */ PRINTK("Unrecognized Message Header: %08x%08x\n", *(unsigned int *) reply->message, *(unsigned int *) (reply->message+4)); zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } } static int convert_response_xcrb(struct zcrypt_device *zdev, struct ap_message *reply, struct ica_xcRB *xcRB) { struct type86x_reply *msg = reply->message; /* Response type byte is the second byte in the response. */ switch (((unsigned char *) reply->message)[1]) { case TYPE82_RSP_CODE: case TYPE88_RSP_CODE: xcRB->status = 0x0008044DL; /* HDD_InvalidParm */ return convert_error(zdev, reply); case TYPE86_RSP_CODE: if (msg->hdr.reply_code) { memcpy(&(xcRB->status), msg->fmt2.apfs, sizeof(u32)); return convert_error(zdev, reply); } if (msg->cprbx.cprb_ver_id == 0x02) return convert_type86_xcrb(zdev, reply, xcRB); /* no break, incorrect cprb version is an unknown response */ default: /* Unknown response type, this should NEVER EVER happen */ PRINTK("Unrecognized Message Header: %08x%08x\n", *(unsigned int *) reply->message, *(unsigned int *) (reply->message+4)); xcRB->status = 0x0008044DL; /* HDD_InvalidParm */ zdev->online = 0; return -EAGAIN; /* repeat the request on a different device. */ } } /** * This function is called from the AP bus code after a crypto request * "msg" has finished with the reply message "reply". * It is called from tasklet context. * @ap_dev: pointer to the AP device * @msg: pointer to the AP message * @reply: pointer to the AP reply message */ static void zcrypt_pcixcc_receive(struct ap_device *ap_dev, struct ap_message *msg, struct ap_message *reply) { static struct error_hdr error_reply = { .type = TYPE82_RSP_CODE, .reply_code = REP82_ERROR_MACHINE_FAILURE, }; struct response_type *resp_type = (struct response_type *) msg->private; struct type86x_reply *t86r = reply->message; int length; /* Copy the reply message to the request message buffer. */ if (IS_ERR(reply)) memcpy(msg->message, &error_reply, sizeof(error_reply)); else if (t86r->hdr.type == TYPE86_RSP_CODE && t86r->cprbx.cprb_ver_id == 0x02) { switch (resp_type->type) { case PCIXCC_RESPONSE_TYPE_ICA: length = sizeof(struct type86x_reply) + t86r->length - 2; length = min(PCIXCC_MAX_ICA_RESPONSE_SIZE, length); memcpy(msg->message, reply->message, length); break; case PCIXCC_RESPONSE_TYPE_XCRB: length = t86r->fmt2.offset2 + t86r->fmt2.count2; length = min(PCIXCC_MAX_XCRB_RESPONSE_SIZE, length); memcpy(msg->message, reply->message, length); break; default: PRINTK("Invalid internal response type: %i\n", resp_type->type); memcpy(msg->message, &error_reply, sizeof error_reply); } } else memcpy(msg->message, reply->message, sizeof error_reply); complete(&(resp_type->work)); } static atomic_t zcrypt_step = ATOMIC_INIT(0); /** * The request distributor calls this function if it picked the PCIXCC/CEX2C * device to handle a modexpo request. * @zdev: pointer to zcrypt_device structure that identifies the * PCIXCC/CEX2C device to the request distributor * @mex: pointer to the modexpo request buffer */ static long zcrypt_pcixcc_modexpo(struct zcrypt_device *zdev, struct ica_rsa_modexpo *mex) { struct ap_message ap_msg; struct response_type resp_type = { .type = PCIXCC_RESPONSE_TYPE_ICA, }; int rc; ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); if (!ap_msg.message) return -ENOMEM; ap_msg.psmid = (((unsigned long long) current->pid) << 32) + atomic_inc_return(&zcrypt_step); ap_msg.private = &resp_type; rc = ICAMEX_msg_to_type6MEX_msgX(zdev, &ap_msg, mex); if (rc) goto out_free; init_completion(&resp_type.work); ap_queue_message(zdev->ap_dev, &ap_msg); rc = wait_for_completion_interruptible_timeout( &resp_type.work, PCIXCC_CLEANUP_TIME); if (rc > 0) rc = convert_response_ica(zdev, &ap_msg, mex->outputdata, mex->outputdatalength); else { /* Signal pending or message timed out. */ ap_cancel_message(zdev->ap_dev, &ap_msg); if (rc == 0) /* Message timed out. */ rc = -ETIME; } out_free: free_page((unsigned long) ap_msg.message); return rc; } /** * The request distributor calls this function if it picked the PCIXCC/CEX2C * device to handle a modexpo_crt request. * @zdev: pointer to zcrypt_device structure that identifies the * PCIXCC/CEX2C device to the request distributor * @crt: pointer to the modexpoc_crt request buffer */ static long zcrypt_pcixcc_modexpo_crt(struct zcrypt_device *zdev, struct ica_rsa_modexpo_crt *crt) { struct ap_message ap_msg; struct response_type resp_type = { .type = PCIXCC_RESPONSE_TYPE_ICA, }; int rc; ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL); if (!ap_msg.message) return -ENOMEM; ap_msg.psmid = (((unsigned long long) current->pid) << 32) + atomic_inc_return(&zcrypt_step); ap_msg.private = &resp_type; rc = ICACRT_msg_to_type6CRT_msgX(zdev, &ap_msg, crt); if (rc) goto out_free; init_completion(&resp_type.work); ap_queue_message(zdev->ap_dev, &ap_msg); rc = wait_for_completion_interruptible_timeout( &resp_type.work, PCIXCC_CLEANUP_TIME); if (rc > 0) rc = convert_response_ica(zdev, &ap_msg, crt->outputdata, crt->outputdatalength); else { /* Signal pending or message timed out. */ ap_cancel_message(zdev->ap_dev, &ap_msg); if (rc == 0) /* Message timed out. */ rc = -ETIME; } out_free: free_page((unsigned long) ap_msg.message); return rc; } /** * The request distributor calls this function if it picked the PCIXCC/CEX2C * device to handle a send_cprb request. * @zdev: pointer to zcrypt_device structure that identifies the * PCIXCC/CEX2C device to the request distributor * @xcRB: pointer to the send_cprb request buffer */ static long zcrypt_pcixcc_send_cprb(struct zcrypt_device *zdev, struct ica_xcRB *xcRB) { struct ap_message ap_msg; struct response_type resp_type = { .type = PCIXCC_RESPONSE_TYPE_XCRB, }; int rc; ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL); if (!ap_msg.message) return -ENOMEM; ap_msg.psmid = (((unsigned long long) current->pid) << 32) + atomic_inc_return(&zcrypt_step); ap_msg.private = &resp_type; rc = XCRB_msg_to_type6CPRB_msgX(zdev, &ap_msg, xcRB); if (rc) goto out_free; init_completion(&resp_type.work); ap_queue_message(zdev->ap_dev, &ap_msg); rc = wait_for_completion_interruptible_timeout( &resp_type.work, PCIXCC_CLEANUP_TIME); if (rc > 0) rc = convert_response_xcrb(zdev, &ap_msg, xcRB); else { /* Signal pending or message timed out. */ ap_cancel_message(zdev->ap_dev, &ap_msg); if (rc == 0) /* Message timed out. */ rc = -ETIME; } out_free: memset(ap_msg.message, 0x0, ap_msg.length); kfree(ap_msg.message); return rc; } /** * The crypto operations for a PCIXCC/CEX2C card. */ static struct zcrypt_ops zcrypt_pcixcc_ops = { .rsa_modexpo = zcrypt_pcixcc_modexpo, .rsa_modexpo_crt = zcrypt_pcixcc_modexpo_crt, .send_cprb = zcrypt_pcixcc_send_cprb, }; /** * Micro-code detection function. Its sends a message to a pcixcc card * to find out the microcode level. * @ap_dev: pointer to the AP device. */ static int zcrypt_pcixcc_mcl(struct ap_device *ap_dev) { static unsigned char msg[] = { 0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x43,0x41,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x00, 0x00,0x00,0x01,0xC4,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x07,0x24,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0xDC,0x02,0x00,0x00,0x00,0x54,0x32, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE8, 0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x0A, 0x4D,0x52,0x50,0x20,0x20,0x20,0x20,0x20, 0x00,0x42,0x00,0x01,0x02,0x03,0x04,0x05, 0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D, 0x0E,0x0F,0x00,0x11,0x22,0x33,0x44,0x55, 0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD, 0xEE,0xFF,0xFF,0xEE,0xDD,0xCC,0xBB,0xAA, 0x99,0x88,0x77,0x66,0x55,0x44,0x33,0x22, 0x11,0x00,0x01,0x23,0x45,0x67,0x89,0xAB, 0xCD,0xEF,0xFE,0xDC,0xBA,0x98,0x76,0x54, 0x32,0x10,0x00,0x9A,0x00,0x98,0x00,0x00, 0x1E,0x00,0x00,0x94,0x00,0x00,0x00,0x00, 0x04,0x00,0x00,0x8C,0x00,0x00,0x00,0x40, 0x02,0x00,0x00,0x40,0xBA,0xE8,0x23,0x3C, 0x75,0xF3,0x91,0x61,0xD6,0x73,0x39,0xCF, 0x7B,0x6D,0x8E,0x61,0x97,0x63,0x9E,0xD9, 0x60,0x55,0xD6,0xC7,0xEF,0xF8,0x1E,0x63, 0x95,0x17,0xCC,0x28,0x45,0x60,0x11,0xC5, 0xC4,0x4E,0x66,0xC6,0xE6,0xC3,0xDE,0x8A, 0x19,0x30,0xCF,0x0E,0xD7,0xAA,0xDB,0x01, 0xD8,0x00,0xBB,0x8F,0x39,0x9F,0x64,0x28, 0xF5,0x7A,0x77,0x49,0xCC,0x6B,0xA3,0x91, 0x97,0x70,0xE7,0x60,0x1E,0x39,0xE1,0xE5, 0x33,0xE1,0x15,0x63,0x69,0x08,0x80,0x4C, 0x67,0xC4,0x41,0x8F,0x48,0xDF,0x26,0x98, 0xF1,0xD5,0x8D,0x88,0xD9,0x6A,0xA4,0x96, 0xC5,0x84,0xD9,0x30,0x49,0x67,0x7D,0x19, 0xB1,0xB3,0x45,0x4D,0xB2,0x53,0x9A,0x47, 0x3C,0x7C,0x55,0xBF,0xCC,0x85,0x00,0x36, 0xF1,0x3D,0x93,0x53 }; unsigned long long psmid; struct CPRBX *cprbx; char *reply; int rc, i; reply = (void *) get_zeroed_page(GFP_KERNEL); if (!reply) return -ENOMEM; rc = ap_send(ap_dev->qid, 0x0102030405060708ULL, msg, sizeof(msg)); if (rc) goto out_free; /* Wait for the test message to complete. */ for (i = 0; i < 6; i++) { mdelay(300); rc = ap_recv(ap_dev->qid, &psmid, reply, 4096); if (rc == 0 && psmid == 0x0102030405060708ULL) break; } if (i >= 6) { /* Got no answer. */ rc = -ENODEV; goto out_free; } cprbx = (struct CPRBX *) (reply + 48); if (cprbx->ccp_rtcode == 8 && cprbx->ccp_rscode == 33) rc = ZCRYPT_PCIXCC_MCL2; else rc = ZCRYPT_PCIXCC_MCL3; out_free: free_page((unsigned long) reply); return rc; } /** * Probe function for PCIXCC/CEX2C cards. It always accepts the AP device * since the bus_match already checked the hardware type. The PCIXCC * cards come in two flavours: micro code level 2 and micro code level 3. * This is checked by sending a test message to the device. * @ap_dev: pointer to the AP device. */ static int zcrypt_pcixcc_probe(struct ap_device *ap_dev) { struct zcrypt_device *zdev; int rc; zdev = zcrypt_device_alloc(PCIXCC_MAX_RESPONSE_SIZE); if (!zdev) return -ENOMEM; zdev->ap_dev = ap_dev; zdev->ops = &zcrypt_pcixcc_ops; zdev->online = 1; if (ap_dev->device_type == AP_DEVICE_TYPE_PCIXCC) { rc = zcrypt_pcixcc_mcl(ap_dev); if (rc < 0) { zcrypt_device_free(zdev); return rc; } zdev->user_space_type = rc; if (rc == ZCRYPT_PCIXCC_MCL2) { zdev->type_string = "PCIXCC_MCL2"; zdev->speed_rating = PCIXCC_MCL2_SPEED_RATING; zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD; zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE; } else { zdev->type_string = "PCIXCC_MCL3"; zdev->speed_rating = PCIXCC_MCL3_SPEED_RATING; zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE; zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE; } } else { zdev->user_space_type = ZCRYPT_CEX2C; zdev->type_string = "CEX2C"; zdev->speed_rating = CEX2C_SPEED_RATING; zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE; zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE; } ap_dev->reply = &zdev->reply; ap_dev->private = zdev; rc = zcrypt_device_register(zdev); if (rc) goto out_free; return 0; out_free: ap_dev->private = NULL; zcrypt_device_free(zdev); return rc; } /** * This is called to remove the extended PCIXCC/CEX2C driver information * if an AP device is removed. */ static void zcrypt_pcixcc_remove(struct ap_device *ap_dev) { struct zcrypt_device *zdev = ap_dev->private; zcrypt_device_unregister(zdev); } int __init zcrypt_pcixcc_init(void) { return ap_driver_register(&zcrypt_pcixcc_driver, THIS_MODULE, "pcixcc"); } void zcrypt_pcixcc_exit(void) { ap_driver_unregister(&zcrypt_pcixcc_driver); } #ifndef CONFIG_ZCRYPT_MONOLITHIC module_init(zcrypt_pcixcc_init); module_exit(zcrypt_pcixcc_exit); #endif