// SPDX-License-Identifier: GPL-2.0 /* * Xilinx VCU Init * * Copyright (C) 2016 - 2017 Xilinx, Inc. * * Contacts Dhaval Shah */ #include #include #include #include #include #include #include /* Address map for different registers implemented in the VCU LogiCORE IP. */ #define VCU_ECODER_ENABLE 0x00 #define VCU_DECODER_ENABLE 0x04 #define VCU_MEMORY_DEPTH 0x08 #define VCU_ENC_COLOR_DEPTH 0x0c #define VCU_ENC_VERTICAL_RANGE 0x10 #define VCU_ENC_FRAME_SIZE_X 0x14 #define VCU_ENC_FRAME_SIZE_Y 0x18 #define VCU_ENC_COLOR_FORMAT 0x1c #define VCU_ENC_FPS 0x20 #define VCU_MCU_CLK 0x24 #define VCU_CORE_CLK 0x28 #define VCU_PLL_BYPASS 0x2c #define VCU_ENC_CLK 0x30 #define VCU_PLL_CLK 0x34 #define VCU_ENC_VIDEO_STANDARD 0x38 #define VCU_STATUS 0x3c #define VCU_AXI_ENC_CLK 0x40 #define VCU_AXI_DEC_CLK 0x44 #define VCU_AXI_MCU_CLK 0x48 #define VCU_DEC_VIDEO_STANDARD 0x4c #define VCU_DEC_FRAME_SIZE_X 0x50 #define VCU_DEC_FRAME_SIZE_Y 0x54 #define VCU_DEC_FPS 0x58 #define VCU_BUFFER_B_FRAME 0x5c #define VCU_WPP_EN 0x60 #define VCU_PLL_CLK_DEC 0x64 #define VCU_GASKET_INIT 0x74 #define VCU_GASKET_VALUE 0x03 /* vcu slcr registers, bitmask and shift */ #define VCU_PLL_CTRL 0x24 #define VCU_PLL_CTRL_RESET_MASK 0x01 #define VCU_PLL_CTRL_RESET_SHIFT 0 #define VCU_PLL_CTRL_BYPASS_MASK 0x01 #define VCU_PLL_CTRL_BYPASS_SHIFT 3 #define VCU_PLL_CTRL_FBDIV_MASK 0x7f #define VCU_PLL_CTRL_FBDIV_SHIFT 8 #define VCU_PLL_CTRL_POR_IN_MASK 0x01 #define VCU_PLL_CTRL_POR_IN_SHIFT 1 #define VCU_PLL_CTRL_PWR_POR_MASK 0x01 #define VCU_PLL_CTRL_PWR_POR_SHIFT 2 #define VCU_PLL_CTRL_CLKOUTDIV_MASK 0x03 #define VCU_PLL_CTRL_CLKOUTDIV_SHIFT 16 #define VCU_PLL_CTRL_DEFAULT 0 #define VCU_PLL_DIV2 2 #define VCU_PLL_CFG 0x28 #define VCU_PLL_CFG_RES_MASK 0x0f #define VCU_PLL_CFG_RES_SHIFT 0 #define VCU_PLL_CFG_CP_MASK 0x0f #define VCU_PLL_CFG_CP_SHIFT 5 #define VCU_PLL_CFG_LFHF_MASK 0x03 #define VCU_PLL_CFG_LFHF_SHIFT 10 #define VCU_PLL_CFG_LOCK_CNT_MASK 0x03ff #define VCU_PLL_CFG_LOCK_CNT_SHIFT 13 #define VCU_PLL_CFG_LOCK_DLY_MASK 0x7f #define VCU_PLL_CFG_LOCK_DLY_SHIFT 25 #define VCU_ENC_CORE_CTRL 0x30 #define VCU_ENC_MCU_CTRL 0x34 #define VCU_DEC_CORE_CTRL 0x38 #define VCU_DEC_MCU_CTRL 0x3c #define VCU_PLL_DIVISOR_MASK 0x3f #define VCU_PLL_DIVISOR_SHIFT 4 #define VCU_SRCSEL_MASK 0x01 #define VCU_SRCSEL_SHIFT 0 #define VCU_SRCSEL_PLL 1 #define VCU_PLL_STATUS 0x60 #define VCU_PLL_STATUS_LOCK_STATUS_MASK 0x01 #define MHZ 1000000 #define FVCO_MIN (1500U * MHZ) #define FVCO_MAX (3000U * MHZ) #define DIVISOR_MIN 0 #define DIVISOR_MAX 63 #define FRAC 100 #define LIMIT (10 * MHZ) /** * struct xvcu_device - Xilinx VCU init device structure * @dev: Platform device * @pll_ref: pll ref clock source * @aclk: axi clock source * @logicore_reg_ba: logicore reg base address * @vcu_slcr_ba: vcu_slcr Register base address * @coreclk: core clock frequency */ struct xvcu_device { struct device *dev; struct clk *pll_ref; struct clk *aclk; void __iomem *logicore_reg_ba; void __iomem *vcu_slcr_ba; u32 coreclk; }; /** * struct xvcu_pll_cfg - Helper data * @fbdiv: The integer portion of the feedback divider to the PLL * @cp: PLL charge pump control * @res: PLL loop filter resistor control * @lfhf: PLL loop filter high frequency capacitor control * @lock_dly: Lock circuit configuration settings for lock windowsize * @lock_cnt: Lock circuit counter setting */ struct xvcu_pll_cfg { u32 fbdiv; u32 cp; u32 res; u32 lfhf; u32 lock_dly; u32 lock_cnt; }; static const struct xvcu_pll_cfg xvcu_pll_cfg[] = { { 25, 3, 10, 3, 63, 1000 }, { 26, 3, 10, 3, 63, 1000 }, { 27, 4, 6, 3, 63, 1000 }, { 28, 4, 6, 3, 63, 1000 }, { 29, 4, 6, 3, 63, 1000 }, { 30, 4, 6, 3, 63, 1000 }, { 31, 6, 1, 3, 63, 1000 }, { 32, 6, 1, 3, 63, 1000 }, { 33, 4, 10, 3, 63, 1000 }, { 34, 5, 6, 3, 63, 1000 }, { 35, 5, 6, 3, 63, 1000 }, { 36, 5, 6, 3, 63, 1000 }, { 37, 5, 6, 3, 63, 1000 }, { 38, 5, 6, 3, 63, 975 }, { 39, 3, 12, 3, 63, 950 }, { 40, 3, 12, 3, 63, 925 }, { 41, 3, 12, 3, 63, 900 }, { 42, 3, 12, 3, 63, 875 }, { 43, 3, 12, 3, 63, 850 }, { 44, 3, 12, 3, 63, 850 }, { 45, 3, 12, 3, 63, 825 }, { 46, 3, 12, 3, 63, 800 }, { 47, 3, 12, 3, 63, 775 }, { 48, 3, 12, 3, 63, 775 }, { 49, 3, 12, 3, 63, 750 }, { 50, 3, 12, 3, 63, 750 }, { 51, 3, 2, 3, 63, 725 }, { 52, 3, 2, 3, 63, 700 }, { 53, 3, 2, 3, 63, 700 }, { 54, 3, 2, 3, 63, 675 }, { 55, 3, 2, 3, 63, 675 }, { 56, 3, 2, 3, 63, 650 }, { 57, 3, 2, 3, 63, 650 }, { 58, 3, 2, 3, 63, 625 }, { 59, 3, 2, 3, 63, 625 }, { 60, 3, 2, 3, 63, 625 }, { 61, 3, 2, 3, 63, 600 }, { 62, 3, 2, 3, 63, 600 }, { 63, 3, 2, 3, 63, 600 }, { 64, 3, 2, 3, 63, 600 }, { 65, 3, 2, 3, 63, 600 }, { 66, 3, 2, 3, 63, 600 }, { 67, 3, 2, 3, 63, 600 }, { 68, 3, 2, 3, 63, 600 }, { 69, 3, 2, 3, 63, 600 }, { 70, 3, 2, 3, 63, 600 }, { 71, 3, 2, 3, 63, 600 }, { 72, 3, 2, 3, 63, 600 }, { 73, 3, 2, 3, 63, 600 }, { 74, 3, 2, 3, 63, 600 }, { 75, 3, 2, 3, 63, 600 }, { 76, 3, 2, 3, 63, 600 }, { 77, 3, 2, 3, 63, 600 }, { 78, 3, 2, 3, 63, 600 }, { 79, 3, 2, 3, 63, 600 }, { 80, 3, 2, 3, 63, 600 }, { 81, 3, 2, 3, 63, 600 }, { 82, 3, 2, 3, 63, 600 }, { 83, 4, 2, 3, 63, 600 }, { 84, 4, 2, 3, 63, 600 }, { 85, 4, 2, 3, 63, 600 }, { 86, 4, 2, 3, 63, 600 }, { 87, 4, 2, 3, 63, 600 }, { 88, 4, 2, 3, 63, 600 }, { 89, 4, 2, 3, 63, 600 }, { 90, 4, 2, 3, 63, 600 }, { 91, 4, 2, 3, 63, 600 }, { 92, 4, 2, 3, 63, 600 }, { 93, 4, 2, 3, 63, 600 }, { 94, 4, 2, 3, 63, 600 }, { 95, 4, 2, 3, 63, 600 }, { 96, 4, 2, 3, 63, 600 }, { 97, 4, 2, 3, 63, 600 }, { 98, 4, 2, 3, 63, 600 }, { 99, 4, 2, 3, 63, 600 }, { 100, 4, 2, 3, 63, 600 }, { 101, 4, 2, 3, 63, 600 }, { 102, 4, 2, 3, 63, 600 }, { 103, 5, 2, 3, 63, 600 }, { 104, 5, 2, 3, 63, 600 }, { 105, 5, 2, 3, 63, 600 }, { 106, 5, 2, 3, 63, 600 }, { 107, 3, 4, 3, 63, 600 }, { 108, 3, 4, 3, 63, 600 }, { 109, 3, 4, 3, 63, 600 }, { 110, 3, 4, 3, 63, 600 }, { 111, 3, 4, 3, 63, 600 }, { 112, 3, 4, 3, 63, 600 }, { 113, 3, 4, 3, 63, 600 }, { 114, 3, 4, 3, 63, 600 }, { 115, 3, 4, 3, 63, 600 }, { 116, 3, 4, 3, 63, 600 }, { 117, 3, 4, 3, 63, 600 }, { 118, 3, 4, 3, 63, 600 }, { 119, 3, 4, 3, 63, 600 }, { 120, 3, 4, 3, 63, 600 }, { 121, 3, 4, 3, 63, 600 }, { 122, 3, 4, 3, 63, 600 }, { 123, 3, 4, 3, 63, 600 }, { 124, 3, 4, 3, 63, 600 }, { 125, 3, 4, 3, 63, 600 }, }; /** * xvcu_read - Read from the VCU register space * @iomem: vcu reg space base address * @offset: vcu reg offset from base * * Return: Returns 32bit value from VCU register specified * */ static inline u32 xvcu_read(void __iomem *iomem, u32 offset) { return ioread32(iomem + offset); } /** * xvcu_write - Write to the VCU register space * @iomem: vcu reg space base address * @offset: vcu reg offset from base * @value: Value to write */ static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value) { iowrite32(value, iomem + offset); } /** * xvcu_write_field_reg - Write to the vcu reg field * @iomem: vcu reg space base address * @offset: vcu reg offset from base * @field: vcu reg field to write to * @mask: vcu reg mask * @shift: vcu reg number of bits to shift the bitfield */ static void xvcu_write_field_reg(void __iomem *iomem, int offset, u32 field, u32 mask, int shift) { u32 val = xvcu_read(iomem, offset); val &= ~(mask << shift); val |= (field & mask) << shift; xvcu_write(iomem, offset, val); } /** * xvcu_set_vcu_pll_info - Set the VCU PLL info * @xvcu: Pointer to the xvcu_device structure * * Programming the VCU PLL based on the user configuration * (ref clock freq, core clock freq, mcu clock freq). * Core clock frequency has higher priority than mcu clock frequency * Errors in following cases * - When mcu or clock clock get from logicoreIP is 0 * - When VCU PLL DIV related bits value other than 1 * - When proper data not found for given data * - When sis570_1 clocksource related operation failed * * Return: Returns status, either success or error+reason */ static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) { u32 refclk, coreclk, mcuclk, inte, deci; u32 divisor_mcu, divisor_core, fvco; u32 clkoutdiv, vcu_pll_ctrl, pll_clk; u32 cfg_val, mod, ctrl; int ret, i; const struct xvcu_pll_cfg *found = NULL; inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK); deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC); coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ; mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ; if (!mcuclk || !coreclk) { dev_err(xvcu->dev, "Invalid mcu and core clock data\n"); return -EINVAL; } refclk = (inte * MHZ) + (deci * (MHZ / FRAC)); dev_dbg(xvcu->dev, "Ref clock from logicoreIP is %uHz\n", refclk); dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk); dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk); clk_disable_unprepare(xvcu->pll_ref); ret = clk_set_rate(xvcu->pll_ref, refclk); if (ret) dev_warn(xvcu->dev, "failed to set logicoreIP refclk rate\n"); ret = clk_prepare_enable(xvcu->pll_ref); if (ret) { dev_err(xvcu->dev, "failed to enable pll_ref clock source\n"); return ret; } refclk = clk_get_rate(xvcu->pll_ref); /* * The divide-by-2 should be always enabled (==1) * to meet the timing in the design. * Otherwise, it's an error */ vcu_pll_ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_CTRL); clkoutdiv = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT; clkoutdiv = clkoutdiv & VCU_PLL_CTRL_CLKOUTDIV_MASK; if (clkoutdiv != 1) { dev_err(xvcu->dev, "clkoutdiv value is invalid\n"); return -EINVAL; } for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i >= 0; i--) { const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i]; fvco = cfg->fbdiv * refclk; if (fvco >= FVCO_MIN && fvco <= FVCO_MAX) { pll_clk = fvco / VCU_PLL_DIV2; if (fvco % VCU_PLL_DIV2 != 0) pll_clk++; mod = pll_clk % coreclk; if (mod < LIMIT) { divisor_core = pll_clk / coreclk; } else if (coreclk - mod < LIMIT) { divisor_core = pll_clk / coreclk; divisor_core++; } else { continue; } if (divisor_core >= DIVISOR_MIN && divisor_core <= DIVISOR_MAX) { found = cfg; divisor_mcu = pll_clk / mcuclk; mod = pll_clk % mcuclk; if (mcuclk - mod < LIMIT) divisor_mcu++; break; } } } if (!found) { dev_err(xvcu->dev, "Invalid clock combination.\n"); return -EINVAL; } xvcu->coreclk = pll_clk / divisor_core; mcuclk = pll_clk / divisor_mcu; dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk); dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk); dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk); vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT); vcu_pll_ctrl |= (found->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) << VCU_PLL_CTRL_FBDIV_SHIFT; vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK << VCU_PLL_CTRL_POR_IN_SHIFT); vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_POR_IN_MASK) << VCU_PLL_CTRL_POR_IN_SHIFT; vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK << VCU_PLL_CTRL_PWR_POR_SHIFT); vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_PWR_POR_MASK) << VCU_PLL_CTRL_PWR_POR_SHIFT; xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, vcu_pll_ctrl); /* Set divisor for the core and mcu clock */ ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL); ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL, ctrl); ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL); ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL, ctrl); ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL); ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL, ctrl); ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL); ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl); /* Set RES, CP, LFHF, LOCK_CNT and LOCK_DLY cfg values */ cfg_val = (found->res << VCU_PLL_CFG_RES_SHIFT) | (found->cp << VCU_PLL_CFG_CP_SHIFT) | (found->lfhf << VCU_PLL_CFG_LFHF_SHIFT) | (found->lock_cnt << VCU_PLL_CFG_LOCK_CNT_SHIFT) | (found->lock_dly << VCU_PLL_CFG_LOCK_DLY_SHIFT); xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CFG, cfg_val); return 0; } /** * xvcu_set_pll - PLL init sequence * @xvcu: Pointer to the xvcu_device structure * * Call the api to set the PLL info and once that is done then * init the PLL sequence to make the PLL stable. * * Return: Returns status, either success or error+reason */ static int xvcu_set_pll(struct xvcu_device *xvcu) { u32 lock_status; unsigned long timeout; int ret; ret = xvcu_set_vcu_pll_info(xvcu); if (ret) { dev_err(xvcu->dev, "failed to set pll info\n"); return ret; } xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, 1, VCU_PLL_CTRL_BYPASS_MASK, VCU_PLL_CTRL_BYPASS_SHIFT); xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, 1, VCU_PLL_CTRL_RESET_MASK, VCU_PLL_CTRL_RESET_SHIFT); xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, 0, VCU_PLL_CTRL_RESET_MASK, VCU_PLL_CTRL_RESET_SHIFT); /* * Defined the timeout for the max time to wait the * PLL_STATUS to be locked. */ timeout = jiffies + msecs_to_jiffies(2000); do { lock_status = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_STATUS); if (lock_status & VCU_PLL_STATUS_LOCK_STATUS_MASK) { xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, 0, VCU_PLL_CTRL_BYPASS_MASK, VCU_PLL_CTRL_BYPASS_SHIFT); return 0; } } while (!time_after(jiffies, timeout)); /* PLL is not locked even after the timeout of the 2sec */ dev_err(xvcu->dev, "PLL is not locked\n"); return -ETIMEDOUT; } /** * xvcu_probe - Probe existence of the logicoreIP * and initialize PLL * * @pdev: Pointer to the platform_device structure * * Return: Returns 0 on success * Negative error code otherwise */ static int xvcu_probe(struct platform_device *pdev) { struct resource *res; struct xvcu_device *xvcu; int ret; xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL); if (!xvcu) return -ENOMEM; xvcu->dev = &pdev->dev; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr"); if (!res) { dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n"); return -ENODEV; } xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!xvcu->vcu_slcr_ba) { dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n"); return -ENOMEM; } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "logicore"); if (!res) { dev_err(&pdev->dev, "get logicore memory resource failed.\n"); return -ENODEV; } xvcu->logicore_reg_ba = devm_ioremap(&pdev->dev, res->start, resource_size(res)); if (!xvcu->logicore_reg_ba) { dev_err(&pdev->dev, "logicore register mapping failed.\n"); return -ENOMEM; } xvcu->aclk = devm_clk_get(&pdev->dev, "aclk"); if (IS_ERR(xvcu->aclk)) { dev_err(&pdev->dev, "Could not get aclk clock\n"); return PTR_ERR(xvcu->aclk); } xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref"); if (IS_ERR(xvcu->pll_ref)) { dev_err(&pdev->dev, "Could not get pll_ref clock\n"); return PTR_ERR(xvcu->pll_ref); } ret = clk_prepare_enable(xvcu->aclk); if (ret) { dev_err(&pdev->dev, "aclk clock enable failed\n"); return ret; } ret = clk_prepare_enable(xvcu->pll_ref); if (ret) { dev_err(&pdev->dev, "pll_ref clock enable failed\n"); goto error_aclk; } /* * Do the Gasket isolation and put the VCU out of reset * Bit 0 : Gasket isolation * Bit 1 : put VCU out of reset */ xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); /* Do the PLL Settings based on the ref clk,core and mcu clk freq */ ret = xvcu_set_pll(xvcu); if (ret) { dev_err(&pdev->dev, "Failed to set the pll\n"); goto error_pll_ref; } dev_set_drvdata(&pdev->dev, xvcu); dev_info(&pdev->dev, "%s: Probed successfully\n", __func__); return 0; error_pll_ref: clk_disable_unprepare(xvcu->pll_ref); error_aclk: clk_disable_unprepare(xvcu->aclk); return ret; } /** * xvcu_remove - Insert gasket isolation * and disable the clock * @pdev: Pointer to the platform_device structure * * Return: Returns 0 on success * Negative error code otherwise */ static int xvcu_remove(struct platform_device *pdev) { struct xvcu_device *xvcu; xvcu = platform_get_drvdata(pdev); if (!xvcu) return -ENODEV; /* Add the the Gasket isolation and put the VCU in reset. */ xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); clk_disable_unprepare(xvcu->pll_ref); clk_disable_unprepare(xvcu->aclk); return 0; } static const struct of_device_id xvcu_of_id_table[] = { { .compatible = "xlnx,vcu" }, { .compatible = "xlnx,vcu-logicoreip-1.0" }, { } }; MODULE_DEVICE_TABLE(of, xvcu_of_id_table); static struct platform_driver xvcu_driver = { .driver = { .name = "xilinx-vcu", .of_match_table = xvcu_of_id_table, }, .probe = xvcu_probe, .remove = xvcu_remove, }; module_platform_driver(xvcu_driver); MODULE_AUTHOR("Dhaval Shah "); MODULE_DESCRIPTION("Xilinx VCU init Driver"); MODULE_LICENSE("GPL v2");