/* * FB driver for the PCD8544 LCD Controller * * The display is monochrome and the video memory is RGB565. * Any pixel value except 0 turns the pixel on. * * Copyright (C) 2013 Noralf Tronnes * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include "fbtft.h" #define DRVNAME "fb_pcd8544" #define WIDTH 84 #define HEIGHT 48 #define TXBUFLEN (84*6) #define DEFAULT_GAMMA "40" /* gamma is used to control contrast in this driver */ static unsigned tc; module_param(tc, uint, 0); MODULE_PARM_DESC(tc, "TC[1:0] Temperature coefficient: 0-3 (default: 0)"); static unsigned bs = 4; module_param(bs, uint, 0); MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)"); static int init_display(struct fbtft_par *par) { fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); par->fbtftops.reset(par); /* Function set */ write_reg(par, 0x21); /* 5:1 1 2:0 PD - Powerdown control: chip is active 1:0 V - Entry mode: horizontal addressing 0:1 H - Extended instruction set control: extended */ /* H=1 Temperature control */ write_reg(par, 0x04 | (tc & 0x3)); /* 2:1 1 1:x TC1 - Temperature Coefficient: 0x10 0:x TC0 */ /* H=1 Bias system */ write_reg(par, 0x10 | (bs & 0x7)); /* 4:1 1 3:0 0 2:x BS2 - Bias System 1:x BS1 0:x BS0 */ /* Function set */ write_reg(par, 0x22); /* 5:1 1 2:0 PD - Powerdown control: chip is active 1:1 V - Entry mode: vertical addressing 0:0 H - Extended instruction set control: basic */ /* H=0 Display control */ write_reg(par, 0x08 | 4); /* 3:1 1 2:1 D - DE: 10=normal mode 1:0 0 0:0 E */ return 0; } static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) { fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par, "%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye); /* H=0 Set X address of RAM */ write_reg(par, 0x80); /* 7:1 1 6-0: X[6:0] - 0x00 */ /* H=0 Set Y address of RAM */ write_reg(par, 0x40); /* 7:0 0 6:1 1 2-0: Y[2:0] - 0x0 */ } static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) { u16 *vmem16 = (u16 *)par->info->screen_base; u8 *buf = par->txbuf.buf; int x, y, i; int ret = 0; fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s()\n", __func__); for (x = 0; x < 84; x++) { for (y = 0; y < 6; y++) { *buf = 0x00; for (i = 0; i < 8; i++) { *buf |= (vmem16[(y*8+i)*84+x] ? 1 : 0) << i; } buf++; } } /* Write data */ gpio_set_value(par->gpio.dc, 1); ret = par->fbtftops.write(par, par->txbuf.buf, 6*84); if (ret < 0) dev_err(par->info->device, "%s: write failed and returned: %d\n", __func__, ret); return ret; } static int set_gamma(struct fbtft_par *par, unsigned long *curves) { fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); /* apply mask */ curves[0] &= 0x7F; write_reg(par, 0x23); /* turn on extended instruction set */ write_reg(par, 0x80 | curves[0]); write_reg(par, 0x22); /* turn off extended instruction set */ return 0; } static struct fbtft_display display = { .regwidth = 8, .width = WIDTH, .height = HEIGHT, .txbuflen = TXBUFLEN, .gamma_num = 1, .gamma_len = 1, .gamma = DEFAULT_GAMMA, .fbtftops = { .init_display = init_display, .set_addr_win = set_addr_win, .write_vmem = write_vmem, .set_gamma = set_gamma, }, .backlight = 1, }; FBTFT_REGISTER_DRIVER(DRVNAME, "philips,pdc8544", &display); MODULE_ALIAS("spi:" DRVNAME); MODULE_ALIAS("spi:pdc8544"); MODULE_DESCRIPTION("FB driver for the PCD8544 LCD Controller"); MODULE_AUTHOR("Noralf Tronnes"); MODULE_LICENSE("GPL");