This is a driver for the WIS GO7007SB multi-format video encoder. Pete Eberlein The driver was originally released under the GPL and is currently hosted at: http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver The go7007 firmware can be acquired from the package on the site above. I've modified the driver to support the following Video4Linux2 MPEG controls, with acceptable values: V4L2_CID_MPEG_STREAM_TYPE V4L2_MPEG_STREAM_TYPE_MPEG2_DVD V4L2_MPEG_STREAM_TYPE_MPEG_ELEM V4L2_CID_MPEG_VIDEO_ENCODING V4L2_MPEG_VIDEO_ENCODING_MPEG_1 V4L2_MPEG_VIDEO_ENCODING_MPEG_2 V4L2_MPEG_VIDEO_ENCODING_MPEG_4 V4L2_CID_MPEG_VIDEO_ASPECT V4L2_MPEG_VIDEO_ASPECT_1x1 V4L2_MPEG_VIDEO_ASPECT_4x3 V4L2_MPEG_VIDEO_ASPECT_16x9 V4L2_CID_MPEG_VIDEO_GOP_SIZE integer V4L2_CID_MPEG_VIDEO_BITRATE 64000 .. 10000000 These should be used instead of the non-standard GO7007 ioctls described below. The README files from the original package appears below: --------------------------------------------------------------------------- WIS GO7007SB Public Linux Driver --------------------------------------------------------------------------- *** Please see the file RELEASE-NOTES for important last-minute updates *** 0. OVERVIEW AND LICENSING/DISCLAIMER This driver kit contains Linux drivers for the WIS GO7007SB multi-format video encoder. Only kernel version 2.6.x is supported. The video stream is available through the Video4Linux2 API and the audio stream is available through the ALSA API (or the OSS emulation layer of the ALSA system). The files in kernel/ and hotplug/ are licensed under the GNU General Public License Version 2 from the Free Software Foundation. A copy of the license is included in the file COPYING. The example applications in apps/ and C header files in include/ are licensed under a permissive license included in the source files which allows copying, modification and redistribution for any purpose without attribution. The firmware files included in the firmware/ directory may be freely redistributed only in conjunction with this document; but modification, tampering and reverse engineering are prohibited. MICRONAS USA, INC., MAKES NO WARRANTIES TO ANY PERSON OR ENTITY WITH RESPECT TO THE SOFTWARE OR ANY DERIVATIVES THEREOF OR ANY SERVICES OR LICENSES AND DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY, SUPPORT, AND FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. 1. SYSTEM REQUIREMENTS This driver requires Linux kernel 2.6. Kernel 2.4 is not supported. Using kernel 2.6.10 or later is recommended, as earlier kernels are known to have unstable USB 2.0 support. A fully built kernel source tree must be available. Typically this will be linked from "/lib/modules//build" for convenience. If this link does not exist, an extra parameter will need to be passed to the `make` command. All vendor-built kernels should already be configured properly. However, for custom-built kernels, the following options need to be enabled in the kernel as built-in or modules: CONFIG_HOTPLUG - Support for hot-pluggable devices CONFIG_MODULES - Enable loadable module support CONFIG_KMOD - Automatic kernel module loading CONFIG_FW_LOADER - Hotplug firmware loading support CONFIG_I2C - I2C support CONFIG_VIDEO_DEV - Video For Linux CONFIG_SOUND - Sound card support CONFIG_SND - Advanced Linux Sound Architecture CONFIG_USB - Support for Host-side USB CONFIG_USB_DEVICEFS - USB device filesystem CONFIG_USB_EHCI_HCD - EHCI HCD (USB 2.0) support Additionally, to use the example application, the following options need to be enabled in the ALSA section: CONFIG_SND_MIXER_OSS - OSS Mixer API CONFIG_SND_PCM_OSS - OSS PCM (digital audio) API The hotplug scripts, along with the fxload utility, must also be installed. These scripts can be obtained from . Hotplugging is used for loading firmware into the Cypruss EZ-USB chip using fxload and for loading firmware into the driver using the firmware agent. 2. COMPILING AND INSTALLING THE DRIVER Most users should be able to compile the driver by simply running: $ make in the top-level directory of the driver kit. First the kernel modules will be built, followed by the example applications. If the build system is unable to locate the kernel source tree for the currently-running kernel, or if the module should be built for a kernel other than the currently-running kernel, an additional parameter will need to be passed to make to specify the appropriate kernel source directory: $ make KERNELSRC=/usr/src/linux-2.6.10-custom3 Once the compile completes, the driver and firmware files should be installed by running: $ make install The kernel modules will be placed in "/lib/modules//extra" and the firmware files will be placed in the appropriate hotplug firmware directory, usually /lib/firmware. In addition, USB maps and scripts will be placed in /etc/hotplug/usb to enable fxload to initialize the EZ-USB control chip when the device is connected. 3. PAL/SECAM TUNER CONFIGURATION (TV402U-EU only) The PAL model of the Plextor ConvertX TV402U may require additional configuration to correctly select the appropriate TV frequency band and audio subchannel. Users with a device other than the Plextor ConvertX TV402U-EU should skip this section. The wide variety of PAL TV systems used in Europe requires that additional information about the local TV standards be passed to the driver in order to properly tune TV channels. The two necessary parameters are (a) the PAL TV band, and (b) the audio subchannel format in use. In many cases, the appropriate TV band selection is passed to the driver from applications. However, in some cases, the application only specifies that the driver should use PAL but not the specific information about the appropriate TV band. To work around this issue, the correct TV band may be specified in the "force_band" parameter to the wis-sony-tuner module: TV band force_band ------- ---------- PAL B/G B PAL I I PAL D/K D SECAM L L If the "force_band" parameter is specified, the driver will ignore any TV band specified by applications and will always use the band provided in the module parameter. The other parameter that can be specified is the audio subchannel format. There are several stereo audio carrier systems in use, including NICAM and three varieties of A2. To receive audio broadcast on one of these stereo carriers, the "force_mpx_mode" parameter must be specified to the wis-sony-tuner module. TV band Audio subcarrier force_mpx_mode ------- ---------------- -------------- PAL B/G Mono (default) 1 PAL B/G A2 2 PAL B/G NICAM 3 PAL I Mono (default) 4 PAL I NICAM 5 PAL D/K Mono (default) 6 PAL D/K A2 (1) 7 PAL D/K A2 (2) 8 PAL D/K A2 (3) 9 PAL D/K NICAM 10 SECAM L Mono (default) 11 SECAM L NICAM 12 If the "force_mpx_mode" parameter is not specified, the correct mono-only mode will be chosen based on the TV band. However, the tuner will not receive stereo audio or bilingual broadcasts correctly. To pass the "force_band" or "force_mpx_mode" parameters to the wis-sony-tuner module, the following line must be added to the modprobe configuration file, which varies from one Linux distribution to another. options wis-sony-tuner force_band=B force_mpx_mode=2 The above example would force the tuner to the PAL B/G TV band and receive stereo audio broadcasts on the A2 carrier. To verify that the configuration has been placed in the correct location, execute: $ modprobe -c | grep wis-sony-tuner If the configuration line appears, then modprobe will pass the parameters correctly the next time the wis-sony-tuner module is loaded into the kernel. 4. TESTING THE DRIVER Because few Linux applications are able to correctly capture from Video4Linux2 devices with only compressed formats supported, the new driver should be tested with the "gorecord" application in the apps/ directory. First connect a video source to the device, such as a DVD player or VCR. This will be captured to a file for testing the driver. If an input source is unavailable, a test file can still be captured, but the video will be black and the audio will be silent. This application will auto-detect the V4L2 and ALSA/OSS device names of the hardware and will record video and audio to an AVI file for a specified number of seconds. For example: $ apps/gorecord -duration 60 capture.avi If this application does not successfully record an AVI file, the error messages produced by gorecord and recorded in the system log (usually in /var/log/messages) should provide information to help resolve the problem. Supplying no parameters to gorecord will cause it to probe the available devices and exit. Use the -help flag for usage information. 5. USING THE DRIVER The V4L2 device implemented by the driver provides a standard compressed format API, within the following criteria: * Applications that only support the original Video4Linux1 API will not be able to communicate with this driver at all. * No raw video modes are supported, so applications like xawtv that expect only uncompressed video will not function. * Supported compression formats are: Motion-JPEG, MPEG1, MPEG2 and MPEG4. * MPEG video formats are delivered as Video Elementary Streams only. Program Stream (PS), Transport Stream (TS) and Packetized Elementary Stream (PES) formats are not supported. * Video parameters such as format and input port may not be changed while the encoder is active. * The audio capture device only functions when the video encoder is actively capturing video. Attempts to read from the audio device when the encoder is inactive will result in an I/O error. * The native format of the audio device is 48Khz 2-channel 16-bit little-endian PCM, delivered through the ALSA system. No audio compression is implemented in the hardware. ALSA may convert to other uncompressed formats on the fly. The include/ directory contains a C header file describing non-standard features of the GO7007SB encoder, which are described below: GO7007IOC_S_COMP_PARAMS, GO7007IOC_G_COMP_PARAMS These ioctls are used to negotiate general compression parameters. To query the current parameters, call the GO7007IOC_G_COMP_PARAMS ioctl with a pointer to a struct go7007_comp_params. If the driver is not set to MPEG format, the EINVAL error code will be returned. To change the current parameters, initialize all fields of a struct go7007_comp_params and call the GO7007_IOC_S_COMP_PARAMS ioctl with a pointer to this structure. The driver will return the current parameters with any necessary changes to conform to the limitations of the hardware or current compression mode. Any or all fields can be set to zero to request a reasonable default value. If the driver is not set to MPEG format, the EINVAL error code will be returned. When I/O is in progress, the EBUSY error code will be returned. Fields in struct go7007_comp_params: __u32 The maximum number of frames in each gop_size Group Of Pictures; i.e. the maximum number of frames minus one between each key frame. __u32 The maximum number of sequential max_b_frames bidirectionally-predicted frames. (B-frames are not yet supported.) enum go7007_aspect_ratio The aspect ratio to be encoded in the aspect_ratio meta-data of the compressed format. Choices are: GO7007_ASPECT_RATIO_1_1 GO7007_ASPECT_RATIO_4_3_NTSC GO7007_ASPECT_RATIO_4_3_PAL GO7007_ASPECT_RATIO_16_9_NTSC GO7007_ASPECT_RATIO_16_9_PAL __u32 Bit-wise OR of control flags (below) flags Flags in struct go7007_comp_params: GO7007_COMP_CLOSED_GOP Only produce self-contained GOPs, used to produce streams appropriate for random seeking. GO7007_COMP_OMIT_SEQ_HEADER Omit the stream sequence header. GO7007IOC_S_MPEG_PARAMS, GO7007IOC_G_MPEG_PARAMS These ioctls are used to negotiate MPEG-specific stream parameters when the pixelformat has been set to V4L2_PIX_FMT_MPEG. To query the current parameters, call the GO7007IOC_G_MPEG_PARAMS ioctl with a pointer to a struct go7007_mpeg_params. If the driver is not set to MPEG format, the EINVAL error code will be returned. To change the current parameters, initialize all fields of a struct go7007_mpeg_params and call the GO7007_IOC_S_MPEG_PARAMS ioctl with a pointer to this structure. The driver will return the current parameters with any necessary changes to conform to the limitations of the hardware or selected MPEG mode. Any or all fields can be set to zero to request a reasonable default value. If the driver is not set to MPEG format, the EINVAL error code will be returned. When I/O is in progress, the EBUSY error code will be returned. Fields in struct go7007_mpeg_params: enum go7007_mpeg_video_standard mpeg_video_standard The MPEG video standard in which to compress the video. Choices are: GO7007_MPEG_VIDEO_MPEG1 GO7007_MPEG_VIDEO_MPEG2 GO7007_MPEG_VIDEO_MPEG4 __u32 Bit-wise OR of control flags (below) flags __u32 The profile and level indication to be pali stored in the sequence header. This is only used as an indicator to the decoder, and does not affect the MPEG features used in the video stream. Not valid for MPEG1. Choices for MPEG2 are: GO7007_MPEG2_PROFILE_MAIN_MAIN Choices for MPEG4 are: GO7007_MPEG4_PROFILE_S_L0 GO7007_MPEG4_PROFILE_S_L1 GO7007_MPEG4_PROFILE_S_L2 GO7007_MPEG4_PROFILE_S_L3 GO7007_MPEG4_PROFILE_ARTS_L1 GO7007_MPEG4_PROFILE_ARTS_L2 GO7007_MPEG4_PROFILE_ARTS_L3 GO7007_MPEG4_PROFILE_ARTS_L4 GO7007_MPEG4_PROFILE_AS_L0 GO7007_MPEG4_PROFILE_AS_L1 GO7007_MPEG4_PROFILE_AS_L2 GO7007_MPEG4_PROFILE_AS_L3 GO7007_MPEG4_PROFILE_AS_L4 GO7007_MPEG4_PROFILE_AS_L5 Flags in struct go7007_mpeg_params: GO7007_MPEG_FORCE_DVD_MODE Force all compression parameters and bitrate control settings to comply with DVD MPEG2 stream requirements. This overrides most compression and bitrate settings! GO7007_MPEG_OMIT_GOP_HEADER Omit the GOP header. GO7007_MPEG_REPEAT_SEQHEADER Repeat the MPEG sequence header at the start of each GOP. GO7007IOC_S_BITRATE, GO7007IOC_G_BITRATE These ioctls are used to set and query the target bitrate value for the compressed video stream. The bitrate may be selected by storing the target bits per second in an int and calling GO7007IOC_S_BITRATE with a pointer to the int. The bitrate may be queried by calling GO7007IOC_G_BITRATE with a pointer to an int where the current bitrate will be stored. Note that this is the primary means of controlling the video quality for all compression modes, including V4L2_PIX_FMT_MJPEG. The VIDIOC_S_JPEGCOMP ioctl is not supported. ---------------------------------------------------------------------------- Installing the WIS PCI Voyager Driver --------------------------------------------------------------------------- The WIS PCI Voyager driver requires several patches to the Linux 2.6.11.x kernel source tree before compiling the driver. These patches update the in-kernel SAA7134 driver to the newest development version and patch bugs in the TDA8290/TDA8275 tuner driver. The following patches must be downloaded from Gerd Knorr's website and applied in the order listed: http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner http://dl.bytesex.org/patches/2.6.11-2/i2c-tuner2 http://dl.bytesex.org/patches/2.6.11-2/v4l2-api-mpeg http://dl.bytesex.org/patches/2.6.11-2/saa7134-update The following patches are included with this SDK and can be applied in any order: patches/2.6.11/saa7134-voyager.diff patches/2.6.11/tda8275-newaddr.diff patches/2.6.11/tda8290-ntsc.diff Check to make sure the CONFIG_VIDEO_SAA7134 option is enabled in the kernel configuration, and build and install the kernel. After rebooting into the new kernel, the GO7007 driver can be compiled and installed: $ make SAA7134_BUILD=y $ make install $ modprobe saa7134-go7007 There will be two V4L video devices associated with the PCI Voyager. The first device (most likely /dev/video0) provides access to the raw video capture mode of the SAA7133 device and is used to configure the source video parameters and tune the TV tuner. This device can be used with xawtv or other V4L(2) video software as a standard uncompressed device. The second device (most likely /dev/video1) provides access to the compression functions of the GO7007. It can be tested using the gorecord application in the apps/ directory of this SDK: $ apps/gorecord -vdevice /dev/video1 -noaudio test.avi Currently the frame resolution is fixed at 720x480 (NTSC) or 720x576 (PAL), and the video standard must be specified to both the raw and the compressed video devices (xawtv and gorecord, for example). -------------------------------------------------------------------------- RELEASE NOTES FOR WIS GO7007SB LINUX DRIVER --------------------------------------------------------------------------- Last updated: 5 November 2005 - Release 0.9.7 includes new support for using udev to run fxload. The install script should automatically detect whether the old hotplug scripts or the new udev rules should be used. To force the use of hotplug, run "make install USE_UDEV=n". To force the use of udev, run "make install USE_UDEV=y". - Motion detection is supported but undocumented. Try the `modet` app for a demonstration of how to use the facility. - Using USB2.0 devices such as the TV402U with USB1.1 HCDs or hubs can cause buffer overruns and frame drops, even at low framerates, due to inconsistency in the bitrate control mechanism. - On devices with an SAA7115, including the Plextor ConvertX, video height values of 96, 128, 160, 192, 256, 320, and 384 do not work in NTSC mode. All valid heights up to 512 work correctly in PAL mode. - The WIS Star Trek and PCI Voyager boards have no support yet for audio or the TV tuner.