/* * This file is based on code from OCTEON SDK by Cavium Networks. * * Copyright (c) 2003-2007 Cavium Networks * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include "ethernet-defines.h" #include "octeon-ethernet.h" #include "ethernet-util.h" #include "ethernet-mdio.h" #include #include #include #include static DEFINE_SPINLOCK(global_register_lock); static int number_rgmii_ports; static void cvm_oct_set_hw_preamble(struct octeon_ethernet *priv, bool enable) { union cvmx_gmxx_rxx_frm_ctl gmxx_rxx_frm_ctl; union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs; union cvmx_gmxx_rxx_int_reg gmxx_rxx_int_reg; int interface = INTERFACE(priv->port); int index = INDEX(priv->port); /* Set preamble checking. */ gmxx_rxx_frm_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface)); gmxx_rxx_frm_ctl.s.pre_chk = enable; cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface), gmxx_rxx_frm_ctl.u64); /* Set FCS stripping. */ ipd_sub_port_fcs.u64 = cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS); if (enable) ipd_sub_port_fcs.s.port_bit |= 1ull << priv->port; else ipd_sub_port_fcs.s.port_bit &= 0xffffffffull ^ (1ull << priv->port); cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, ipd_sub_port_fcs.u64); /* Clear any error bits. */ gmxx_rxx_int_reg.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(index, interface)); cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmxx_rxx_int_reg.u64); } static void cvm_oct_rgmii_poll(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); unsigned long flags = 0; cvmx_helper_link_info_t link_info; int use_global_register_lock = (priv->phydev == NULL); BUG_ON(in_interrupt()); if (use_global_register_lock) { /* * Take the global register lock since we are going to * touch registers that affect more than one port. */ spin_lock_irqsave(&global_register_lock, flags); } else { mutex_lock(&priv->phydev->bus->mdio_lock); } link_info = cvmx_helper_link_get(priv->port); if (link_info.u64 == priv->link_info) { if (link_info.s.speed == 10) { /* * Read the GMXX_RXX_INT_REG[PCTERR] bit and * see if we are getting preamble errors. */ int interface = INTERFACE(priv->port); int index = INDEX(priv->port); union cvmx_gmxx_rxx_int_reg gmxx_rxx_int_reg; gmxx_rxx_int_reg.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_REG (index, interface)); if (gmxx_rxx_int_reg.s.pcterr) { /* * We are getting preamble errors at * 10Mbps. Most likely the PHY is * giving us packets with mis aligned * preambles. In order to get these * packets we need to disable preamble * checking and do it in software. */ cvm_oct_set_hw_preamble(priv, false); printk_ratelimited("%s: Using 10Mbps with software preamble removal\n", dev->name); } } if (use_global_register_lock) spin_unlock_irqrestore(&global_register_lock, flags); else mutex_unlock(&priv->phydev->bus->mdio_lock); return; } /* Since the 10Mbps preamble workaround is allowed we need to enable preamble checking, FCS stripping, and clear error bits on every speed change. If errors occur during 10Mbps operation the above code will change this stuff */ cvm_oct_set_hw_preamble(priv, true); if (priv->phydev == NULL) { link_info = cvmx_helper_link_autoconf(priv->port); priv->link_info = link_info.u64; } if (use_global_register_lock) spin_unlock_irqrestore(&global_register_lock, flags); else mutex_unlock(&priv->phydev->bus->mdio_lock); if (priv->phydev == NULL) { /* Tell core. */ if (link_info.s.link_up) { if (!netif_carrier_ok(dev)) netif_carrier_on(dev); } else if (netif_carrier_ok(dev)) { netif_carrier_off(dev); } cvm_oct_note_carrier(priv, link_info); } } static int cmv_oct_rgmii_gmx_interrupt(int interface) { int index; int count = 0; /* Loop through every port of this interface */ for (index = 0; index < cvmx_helper_ports_on_interface(interface); index++) { union cvmx_gmxx_rxx_int_reg gmx_rx_int_reg; /* Read the GMX interrupt status bits */ gmx_rx_int_reg.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_REG (index, interface)); gmx_rx_int_reg.u64 &= cvmx_read_csr(CVMX_GMXX_RXX_INT_EN (index, interface)); /* Poll the port if inband status changed */ if (gmx_rx_int_reg.s.phy_dupx || gmx_rx_int_reg.s.phy_link || gmx_rx_int_reg.s.phy_spd) { struct net_device *dev = cvm_oct_device[cvmx_helper_get_ipd_port (interface, index)]; struct octeon_ethernet *priv = netdev_priv(dev); if (dev && !atomic_read(&cvm_oct_poll_queue_stopping)) queue_work(cvm_oct_poll_queue, &priv->port_work); gmx_rx_int_reg.u64 = 0; gmx_rx_int_reg.s.phy_dupx = 1; gmx_rx_int_reg.s.phy_link = 1; gmx_rx_int_reg.s.phy_spd = 1; cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmx_rx_int_reg.u64); count++; } } return count; } static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id) { union cvmx_npi_rsl_int_blocks rsl_int_blocks; int count = 0; rsl_int_blocks.u64 = cvmx_read_csr(CVMX_NPI_RSL_INT_BLOCKS); /* Check and see if this interrupt was caused by the GMX0 block */ if (rsl_int_blocks.s.gmx0) count += cmv_oct_rgmii_gmx_interrupt(0); /* Check and see if this interrupt was caused by the GMX1 block */ if (rsl_int_blocks.s.gmx1) count += cmv_oct_rgmii_gmx_interrupt(1); return count ? IRQ_HANDLED : IRQ_NONE; } int cvm_oct_rgmii_open(struct net_device *dev) { return cvm_oct_common_open(dev, cvm_oct_rgmii_poll, false); } static void cvm_oct_rgmii_immediate_poll(struct work_struct *work) { struct octeon_ethernet *priv = container_of(work, struct octeon_ethernet, port_work); cvm_oct_rgmii_poll(cvm_oct_device[priv->port]); } int cvm_oct_rgmii_init(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); int r; cvm_oct_common_init(dev); INIT_WORK(&priv->port_work, cvm_oct_rgmii_immediate_poll); /* * Due to GMX errata in CN3XXX series chips, it is necessary * to take the link down immediately when the PHY changes * state. In order to do this we call the poll function every * time the RGMII inband status changes. This may cause * problems if the PHY doesn't implement inband status * properly. */ if (number_rgmii_ports == 0) { r = request_irq(OCTEON_IRQ_RML, cvm_oct_rgmii_rml_interrupt, IRQF_SHARED, "RGMII", &number_rgmii_ports); if (r != 0) return r; } number_rgmii_ports++; /* * Only true RGMII ports need to be polled. In GMII mode, port * 0 is really a RGMII port. */ if (((priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) && (priv->port == 0)) || (priv->imode == CVMX_HELPER_INTERFACE_MODE_RGMII)) { if (!octeon_is_simulation()) { union cvmx_gmxx_rxx_int_en gmx_rx_int_en; int interface = INTERFACE(priv->port); int index = INDEX(priv->port); /* * Enable interrupts on inband status changes * for this port. */ gmx_rx_int_en.u64 = 0; gmx_rx_int_en.s.phy_dupx = 1; gmx_rx_int_en.s.phy_link = 1; gmx_rx_int_en.s.phy_spd = 1; cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, interface), gmx_rx_int_en.u64); } } return 0; } void cvm_oct_rgmii_uninit(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); cvm_oct_common_uninit(dev); /* * Only true RGMII ports need to be polled. In GMII mode, port * 0 is really a RGMII port. */ if (((priv->imode == CVMX_HELPER_INTERFACE_MODE_GMII) && (priv->port == 0)) || (priv->imode == CVMX_HELPER_INTERFACE_MODE_RGMII)) { if (!octeon_is_simulation()) { union cvmx_gmxx_rxx_int_en gmx_rx_int_en; int interface = INTERFACE(priv->port); int index = INDEX(priv->port); /* * Disable interrupts on inband status changes * for this port. */ gmx_rx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_EN (index, interface)); gmx_rx_int_en.s.phy_dupx = 0; gmx_rx_int_en.s.phy_link = 0; gmx_rx_int_en.s.phy_spd = 0; cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, interface), gmx_rx_int_en.u64); } } /* Remove the interrupt handler when the last port is removed. */ number_rgmii_ports--; if (number_rgmii_ports == 0) free_irq(OCTEON_IRQ_RML, &number_rgmii_ports); cancel_work_sync(&priv->port_work); }