/* * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved. * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * OpenIB.org BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef _IPATH_COMMON_H #define _IPATH_COMMON_H /* * This file contains defines, structures, etc. that are used * to communicate between kernel and user code. */ /* This is the IEEE-assigned OUI for QLogic Inc. InfiniPath */ #define IPATH_SRC_OUI_1 0x00 #define IPATH_SRC_OUI_2 0x11 #define IPATH_SRC_OUI_3 0x75 /* version of protocol header (known to chip also). In the long run, * we should be able to generate and accept a range of version numbers; * for now we only accept one, and it's compiled in. */ #define IPS_PROTO_VERSION 2 /* * These are compile time constants that you may want to enable or disable * if you are trying to debug problems with code or performance. * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in * fastpath code * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be * traced in faspath code * _IPATH_TRACING define as 0 if you want to remove all tracing in a * compilation unit * _IPATH_DEBUGGING define as 0 if you want to remove debug prints */ /* * The value in the BTH QP field that InfiniPath uses to differentiate * an infinipath protocol IB packet vs standard IB transport */ #define IPATH_KD_QP 0x656b79 /* * valid states passed to ipath_set_linkstate() user call */ #define IPATH_IB_LINKDOWN 0 #define IPATH_IB_LINKARM 1 #define IPATH_IB_LINKACTIVE 2 #define IPATH_IB_LINKDOWN_ONLY 3 #define IPATH_IB_LINKDOWN_SLEEP 4 #define IPATH_IB_LINKDOWN_DISABLE 5 #define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */ #define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */ #define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */ #define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */ /* * These 3 values (SDR and DDR may be ORed for auto-speed * negotiation) are used for the 3rd argument to path_f_set_ib_cfg * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They * are also the the possible values for ipath_link_speed_enabled and active * The values were chosen to match values used within the IB spec. */ #define IPATH_IB_SDR 1 #define IPATH_IB_DDR 2 /* * stats maintained by the driver. For now, at least, this is global * to all minor devices. */ struct infinipath_stats { /* number of interrupts taken */ __u64 sps_ints; /* number of interrupts for errors */ __u64 sps_errints; /* number of errors from chip (not incl. packet errors or CRC) */ __u64 sps_errs; /* number of packet errors from chip other than CRC */ __u64 sps_pkterrs; /* number of packets with CRC errors (ICRC and VCRC) */ __u64 sps_crcerrs; /* number of hardware errors reported (parity, etc.) */ __u64 sps_hwerrs; /* number of times IB link changed state unexpectedly */ __u64 sps_iblink; __u64 sps_unused; /* was fastrcvint, no longer implemented */ /* number of kernel (port0) packets received */ __u64 sps_port0pkts; /* number of "ethernet" packets sent by driver */ __u64 sps_ether_spkts; /* number of "ethernet" packets received by driver */ __u64 sps_ether_rpkts; /* number of SMA packets sent by driver. Obsolete. */ __u64 sps_sma_spkts; /* number of SMA packets received by driver. Obsolete. */ __u64 sps_sma_rpkts; /* number of times all ports rcvhdrq was full and packet dropped */ __u64 sps_hdrqfull; /* number of times all ports egrtid was full and packet dropped */ __u64 sps_etidfull; /* * number of times we tried to send from driver, but no pio buffers * avail */ __u64 sps_nopiobufs; /* number of ports currently open */ __u64 sps_ports; /* list of pkeys (other than default) accepted (0 means not set) */ __u16 sps_pkeys[4]; __u16 sps_unused16[4]; /* available; maintaining compatible layout */ /* number of user ports per chip (not IB ports) */ __u32 sps_nports; /* not our interrupt, or already handled */ __u32 sps_nullintr; /* max number of packets handled per receive call */ __u32 sps_maxpkts_call; /* avg number of packets handled per receive call */ __u32 sps_avgpkts_call; /* total number of pages locked */ __u64 sps_pagelocks; /* total number of pages unlocked */ __u64 sps_pageunlocks; /* * Number of packets dropped in kernel other than errors (ether * packets if ipath not configured, etc.) */ __u64 sps_krdrops; __u64 sps_txeparity; /* PIO buffer parity error, recovered */ /* pad for future growth */ __u64 __sps_pad[45]; }; /* * These are the status bits readable (in ascii form, 64bit value) * from the "status" sysfs file. */ #define IPATH_STATUS_INITTED 0x1 /* basic initialization done */ #define IPATH_STATUS_DISABLED 0x2 /* hardware disabled */ /* Device has been disabled via admin request */ #define IPATH_STATUS_ADMIN_DISABLED 0x4 /* Chip has been found and initted */ #define IPATH_STATUS_CHIP_PRESENT 0x20 /* IB link is at ACTIVE, usable for data traffic */ #define IPATH_STATUS_IB_READY 0x40 /* link is configured, LID, MTU, etc. have been set */ #define IPATH_STATUS_IB_CONF 0x80 /* no link established, probably no cable */ #define IPATH_STATUS_IB_NOCABLE 0x100 /* A Fatal hardware error has occurred. */ #define IPATH_STATUS_HWERROR 0x200 /* * The list of usermode accessible registers. Also see Reg_* later in file. */ typedef enum _ipath_ureg { /* (RO) DMA RcvHdr to be used next. */ ur_rcvhdrtail = 0, /* (RW) RcvHdr entry to be processed next by host. */ ur_rcvhdrhead = 1, /* (RO) Index of next Eager index to use. */ ur_rcvegrindextail = 2, /* (RW) Eager TID to be processed next */ ur_rcvegrindexhead = 3, /* For internal use only; max register number. */ _IPATH_UregMax } ipath_ureg; /* bit values for spi_runtime_flags */ #define IPATH_RUNTIME_HT 0x1 #define IPATH_RUNTIME_PCIE 0x2 #define IPATH_RUNTIME_FORCE_WC_ORDER 0x4 #define IPATH_RUNTIME_RCVHDR_COPY 0x8 #define IPATH_RUNTIME_MASTER 0x10 #define IPATH_RUNTIME_NODMA_RTAIL 0x80 #define IPATH_RUNTIME_SDMA 0x200 #define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400 #define IPATH_RUNTIME_PIO_REGSWAPPED 0x800 /* * This structure is returned by ipath_userinit() immediately after * open to get implementation-specific info, and info specific to this * instance. * * This struct must have explict pad fields where type sizes * may result in different alignments between 32 and 64 bit * programs, since the 64 bit * bit kernel requires the user code * to have matching offsets */ struct ipath_base_info { /* version of hardware, for feature checking. */ __u32 spi_hw_version; /* version of software, for feature checking. */ __u32 spi_sw_version; /* InfiniPath port assigned, goes into sent packets */ __u16 spi_port; __u16 spi_subport; /* * IB MTU, packets IB data must be less than this. * The MTU is in bytes, and will be a multiple of 4 bytes. */ __u32 spi_mtu; /* * Size of a PIO buffer. Any given packet's total size must be less * than this (in words). Included is the starting control word, so * if 513 is returned, then total pkt size is 512 words or less. */ __u32 spi_piosize; /* size of the TID cache in infinipath, in entries */ __u32 spi_tidcnt; /* size of the TID Eager list in infinipath, in entries */ __u32 spi_tidegrcnt; /* size of a single receive header queue entry in words. */ __u32 spi_rcvhdrent_size; /* * Count of receive header queue entries allocated. * This may be less than the spu_rcvhdrcnt passed in!. */ __u32 spi_rcvhdr_cnt; /* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */ __u32 spi_runtime_flags; /* address where receive buffer queue is mapped into */ __u64 spi_rcvhdr_base; /* user program. */ /* base address of eager TID receive buffers. */ __u64 spi_rcv_egrbufs; /* Allocated by initialization code, not by protocol. */ /* * Size of each TID buffer in host memory, starting at * spi_rcv_egrbufs. The buffers are virtually contiguous. */ __u32 spi_rcv_egrbufsize; /* * The special QP (queue pair) value that identifies an infinipath * protocol packet from standard IB packets. More, probably much * more, to be added. */ __u32 spi_qpair; /* * User register base for init code, not to be used directly by * protocol or applications. */ __u64 __spi_uregbase; /* * Maximum buffer size in bytes that can be used in a single TID * entry (assuming the buffer is aligned to this boundary). This is * the minimum of what the hardware and software support Guaranteed * to be a power of 2. */ __u32 spi_tid_maxsize; /* * alignment of each pio send buffer (byte count * to add to spi_piobufbase to get to second buffer) */ __u32 spi_pioalign; /* * The index of the first pio buffer available to this process; * needed to do lookup in spi_pioavailaddr; not added to * spi_piobufbase. */ __u32 spi_pioindex; /* number of buffers mapped for this process */ __u32 spi_piocnt; /* * Base address of writeonly pio buffers for this process. * Each buffer has spi_piosize words, and is aligned on spi_pioalign * boundaries. spi_piocnt buffers are mapped from this address */ __u64 spi_piobufbase; /* * Base address of readonly memory copy of the pioavail registers. * There are 2 bits for each buffer. */ __u64 spi_pioavailaddr; /* * Address where driver updates a copy of the interface and driver * status (IPATH_STATUS_*) as a 64 bit value. It's followed by a * string indicating hardware error, if there was one. */ __u64 spi_status; /* number of chip ports available to user processes */ __u32 spi_nports; /* unit number of chip we are using */ __u32 spi_unit; /* num bufs in each contiguous set */ __u32 spi_rcv_egrperchunk; /* size in bytes of each contiguous set */ __u32 spi_rcv_egrchunksize; /* total size of mmap to cover full rcvegrbuffers */ __u32 spi_rcv_egrbuftotlen; __u32 spi_filler_for_align; /* address of readonly memory copy of the rcvhdrq tail register. */ __u64 spi_rcvhdr_tailaddr; /* shared memory pages for subports if port is shared */ __u64 spi_subport_uregbase; __u64 spi_subport_rcvegrbuf; __u64 spi_subport_rcvhdr_base; /* shared memory page for hardware port if it is shared */ __u64 spi_port_uregbase; __u64 spi_port_rcvegrbuf; __u64 spi_port_rcvhdr_base; __u64 spi_port_rcvhdr_tailaddr; } __attribute__ ((aligned(8))); /* * This version number is given to the driver by the user code during * initialization in the spu_userversion field of ipath_user_info, so * the driver can check for compatibility with user code. * * The major version changes when data structures * change in an incompatible way. The driver must be the same or higher * for initialization to succeed. In some cases, a higher version * driver will not interoperate with older software, and initialization * will return an error. */ #define IPATH_USER_SWMAJOR 1 /* * Minor version differences are always compatible * a within a major version, however if user software is larger * than driver software, some new features and/or structure fields * may not be implemented; the user code must deal with this if it * cares, or it must abort after initialization reports the difference. */ #define IPATH_USER_SWMINOR 6 #define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR) #define IPATH_KERN_TYPE 0 /* * Similarly, this is the kernel version going back to the user. It's * slightly different, in that we want to tell if the driver was built as * part of a QLogic release, or from the driver from openfabrics.org, * kernel.org, or a standard distribution, for support reasons. * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied. * * It's returned by the driver to the user code during initialization in the * spi_sw_version field of ipath_base_info, so the user code can in turn * check for compatibility with the kernel. */ #define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION) /* * This structure is passed to ipath_userinit() to tell the driver where * user code buffers are, sizes, etc. The offsets and sizes of the * fields must remain unchanged, for binary compatibility. It can * be extended, if userversion is changed so user code can tell, if needed */ struct ipath_user_info { /* * version of user software, to detect compatibility issues. * Should be set to IPATH_USER_SWVERSION. */ __u32 spu_userversion; /* desired number of receive header queue entries */ __u32 spu_rcvhdrcnt; /* size of struct base_info to write to */ __u32 spu_base_info_size; /* * number of words in KD protocol header * This tells InfiniPath how many words to copy to rcvhdrq. If 0, * kernel uses a default. Once set, attempts to set any other value * are an error (EAGAIN) until driver is reloaded. */ __u32 spu_rcvhdrsize; /* * If two or more processes wish to share a port, each process * must set the spu_subport_cnt and spu_subport_id to the same * values. The only restriction on the spu_subport_id is that * it be unique for a given node. */ __u16 spu_subport_cnt; __u16 spu_subport_id; __u32 spu_unused; /* kept for compatible layout */ /* * address of struct base_info to write to */ __u64 spu_base_info; } __attribute__ ((aligned(8))); /* User commands. */ #define IPATH_CMD_MIN 16 #define __IPATH_CMD_USER_INIT 16 /* old set up userspace (for old user code) */ #define IPATH_CMD_PORT_INFO 17 /* find out what resources we got */ #define IPATH_CMD_RECV_CTRL 18 /* control receipt of packets */ #define IPATH_CMD_TID_UPDATE 19 /* update expected TID entries */ #define IPATH_CMD_TID_FREE 20 /* free expected TID entries */ #define IPATH_CMD_SET_PART_KEY 21 /* add partition key */ #define __IPATH_CMD_SLAVE_INFO 22 /* return info on slave processes (for old user code) */ #define IPATH_CMD_ASSIGN_PORT 23 /* allocate HCA and port */ #define IPATH_CMD_USER_INIT 24 /* set up userspace */ #define IPATH_CMD_UNUSED_1 25 #define IPATH_CMD_UNUSED_2 26 #define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */ #define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */ #define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */ /* 30 is unused */ #define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */ #define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */ /* * Poll types */ #define IPATH_POLL_TYPE_URGENT 0x01 #define IPATH_POLL_TYPE_OVERFLOW 0x02 struct ipath_port_info { __u32 num_active; /* number of active units */ __u32 unit; /* unit (chip) assigned to caller */ __u16 port; /* port on unit assigned to caller */ __u16 subport; /* subport on unit assigned to caller */ __u16 num_ports; /* number of ports available on unit */ __u16 num_subports; /* number of subports opened on port */ }; struct ipath_tid_info { __u32 tidcnt; /* make structure same size in 32 and 64 bit */ __u32 tid__unused; /* virtual address of first page in transfer */ __u64 tidvaddr; /* pointer (same size 32/64 bit) to __u16 tid array */ __u64 tidlist; /* * pointer (same size 32/64 bit) to bitmap of TIDs used * for this call; checked for being large enough at open */ __u64 tidmap; }; struct ipath_cmd { __u32 type; /* command type */ union { struct ipath_tid_info tid_info; struct ipath_user_info user_info; /* * address in userspace where we should put the sdma * inflight counter */ __u64 sdma_inflight; /* * address in userspace where we should put the sdma * completion counter */ __u64 sdma_complete; /* address in userspace of struct ipath_port_info to write result to */ __u64 port_info; /* enable/disable receipt of packets */ __u32 recv_ctrl; /* enable/disable armlaunch errors (non-zero to enable) */ __u32 armlaunch_ctrl; /* partition key to set */ __u16 part_key; /* user address of __u32 bitmask of active slaves */ __u64 slave_mask_addr; /* type of polling we want */ __u16 poll_type; } cmd; }; struct ipath_iovec { /* Pointer to data, but same size 32 and 64 bit */ __u64 iov_base; /* * Length of data; don't need 64 bits, but want * ipath_sendpkt to remain same size as before 32 bit changes, so... */ __u64 iov_len; }; /* * Describes a single packet for send. Each packet can have one or more * buffers, but the total length (exclusive of IB headers) must be less * than the MTU, and if using the PIO method, entire packet length, * including IB headers, must be less than the ipath_piosize value (words). * Use of this necessitates including sys/uio.h */ struct __ipath_sendpkt { __u32 sps_flags; /* flags for packet (TBD) */ __u32 sps_cnt; /* number of entries to use in sps_iov */ /* array of iov's describing packet. TEMPORARY */ struct ipath_iovec sps_iov[4]; }; /* * diagnostics can send a packet by "writing" one of the following * two structs to diag data special file * The first is the legacy version for backward compatibility */ struct ipath_diag_pkt { __u32 unit; __u64 data; __u32 len; }; /* The second diag_pkt struct is the expanded version that allows * more control over the packet, specifically, by allowing a custom * pbc (+ static rate) qword, so that special modes and deliberate * changes to CRCs can be used. The elements were also re-ordered * for better alignment and to avoid padding issues. */ struct ipath_diag_xpkt { __u64 data; __u64 pbc_wd; __u32 unit; __u32 len; }; /* * Data layout in I2C flash (for GUID, etc.) * All fields are little-endian binary unless otherwise stated */ #define IPATH_FLASH_VERSION 2 struct ipath_flash { /* flash layout version (IPATH_FLASH_VERSION) */ __u8 if_fversion; /* checksum protecting if_length bytes */ __u8 if_csum; /* * valid length (in use, protected by if_csum), including * if_fversion and if_csum themselves) */ __u8 if_length; /* the GUID, in network order */ __u8 if_guid[8]; /* number of GUIDs to use, starting from if_guid */ __u8 if_numguid; /* the (last 10 characters of) board serial number, in ASCII */ char if_serial[12]; /* board mfg date (YYYYMMDD ASCII) */ char if_mfgdate[8]; /* last board rework/test date (YYYYMMDD ASCII) */ char if_testdate[8]; /* logging of error counts, TBD */ __u8 if_errcntp[4]; /* powered on hours, updated at driver unload */ __u8 if_powerhour[2]; /* ASCII free-form comment field */ char if_comment[32]; /* Backwards compatible prefix for longer QLogic Serial Numbers */ char if_sprefix[4]; /* 82 bytes used, min flash size is 128 bytes */ __u8 if_future[46]; }; /* * These are the counters implemented in the chip, and are listed in order. * The InterCaps naming is taken straight from the chip spec. */ struct infinipath_counters { __u64 LBIntCnt; __u64 LBFlowStallCnt; __u64 TxSDmaDescCnt; /* was Reserved1 */ __u64 TxUnsupVLErrCnt; __u64 TxDataPktCnt; __u64 TxFlowPktCnt; __u64 TxDwordCnt; __u64 TxLenErrCnt; __u64 TxMaxMinLenErrCnt; __u64 TxUnderrunCnt; __u64 TxFlowStallCnt; __u64 TxDroppedPktCnt; __u64 RxDroppedPktCnt; __u64 RxDataPktCnt; __u64 RxFlowPktCnt; __u64 RxDwordCnt; __u64 RxLenErrCnt; __u64 RxMaxMinLenErrCnt; __u64 RxICRCErrCnt; __u64 RxVCRCErrCnt; __u64 RxFlowCtrlErrCnt; __u64 RxBadFormatCnt; __u64 RxLinkProblemCnt; __u64 RxEBPCnt; __u64 RxLPCRCErrCnt; __u64 RxBufOvflCnt; __u64 RxTIDFullErrCnt; __u64 RxTIDValidErrCnt; __u64 RxPKeyMismatchCnt; __u64 RxP0HdrEgrOvflCnt; __u64 RxP1HdrEgrOvflCnt; __u64 RxP2HdrEgrOvflCnt; __u64 RxP3HdrEgrOvflCnt; __u64 RxP4HdrEgrOvflCnt; __u64 RxP5HdrEgrOvflCnt; __u64 RxP6HdrEgrOvflCnt; __u64 RxP7HdrEgrOvflCnt; __u64 RxP8HdrEgrOvflCnt; __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */ __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */ __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */ __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */ __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */ __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */ __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */ __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */ __u64 IBStatusChangeCnt; __u64 IBLinkErrRecoveryCnt; __u64 IBLinkDownedCnt; __u64 IBSymbolErrCnt; /* The following are new for IBA7220 */ __u64 RxVL15DroppedPktCnt; __u64 RxOtherLocalPhyErrCnt; __u64 PcieRetryBufDiagQwordCnt; __u64 ExcessBufferOvflCnt; __u64 LocalLinkIntegrityErrCnt; __u64 RxVlErrCnt; __u64 RxDlidFltrCnt; }; /* * The next set of defines are for packet headers, and chip register * and memory bits that are visible to and/or used by user-mode software * The other bits that are used only by the driver or diags are in * ipath_registers.h */ /* RcvHdrFlags bits */ #define INFINIPATH_RHF_LENGTH_MASK 0x7FF #define INFINIPATH_RHF_LENGTH_SHIFT 0 #define INFINIPATH_RHF_RCVTYPE_MASK 0x7 #define INFINIPATH_RHF_RCVTYPE_SHIFT 11 #define INFINIPATH_RHF_EGRINDEX_MASK 0xFFF #define INFINIPATH_RHF_EGRINDEX_SHIFT 16 #define INFINIPATH_RHF_SEQ_MASK 0xF #define INFINIPATH_RHF_SEQ_SHIFT 0 #define INFINIPATH_RHF_HDRQ_OFFSET_MASK 0x7FF #define INFINIPATH_RHF_HDRQ_OFFSET_SHIFT 4 #define INFINIPATH_RHF_H_ICRCERR 0x80000000 #define INFINIPATH_RHF_H_VCRCERR 0x40000000 #define INFINIPATH_RHF_H_PARITYERR 0x20000000 #define INFINIPATH_RHF_H_LENERR 0x10000000 #define INFINIPATH_RHF_H_MTUERR 0x08000000 #define INFINIPATH_RHF_H_IHDRERR 0x04000000 #define INFINIPATH_RHF_H_TIDERR 0x02000000 #define INFINIPATH_RHF_H_MKERR 0x01000000 #define INFINIPATH_RHF_H_IBERR 0x00800000 #define INFINIPATH_RHF_H_ERR_MASK 0xFF800000 #define INFINIPATH_RHF_L_USE_EGR 0x80000000 #define INFINIPATH_RHF_L_SWA 0x00008000 #define INFINIPATH_RHF_L_SWB 0x00004000 /* infinipath header fields */ #define INFINIPATH_I_VERS_MASK 0xF #define INFINIPATH_I_VERS_SHIFT 28 #define INFINIPATH_I_PORT_MASK 0xF #define INFINIPATH_I_PORT_SHIFT 24 #define INFINIPATH_I_TID_MASK 0x7FF #define INFINIPATH_I_TID_SHIFT 13 #define INFINIPATH_I_OFFSET_MASK 0x1FFF #define INFINIPATH_I_OFFSET_SHIFT 0 /* K_PktFlags bits */ #define INFINIPATH_KPF_INTR 0x1 #define INFINIPATH_KPF_SUBPORT_MASK 0x3 #define INFINIPATH_KPF_SUBPORT_SHIFT 1 #define INFINIPATH_MAX_SUBPORT 4 /* SendPIO per-buffer control */ #define INFINIPATH_SP_TEST 0x40 #define INFINIPATH_SP_TESTEBP 0x20 #define INFINIPATH_SP_TRIGGER_SHIFT 15 /* SendPIOAvail bits */ #define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1 #define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0 /* infinipath header format */ struct ipath_header { /* * Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset - * 14 bits before ECO change ~28 Dec 03. After that, Vers 4, * Port 4, TID 11, offset 13. */ __le32 ver_port_tid_offset; __le16 chksum; __le16 pkt_flags; }; /* infinipath user message header format. * This structure contains the first 4 fields common to all protocols * that employ infinipath. */ struct ipath_message_header { __be16 lrh[4]; __be32 bth[3]; /* fields below this point are in host byte order */ struct ipath_header iph; __u8 sub_opcode; }; /* infinipath ethernet header format */ struct ether_header { __be16 lrh[4]; __be32 bth[3]; struct ipath_header iph; __u8 sub_opcode; __u8 cmd; __be16 lid; __u16 mac[3]; __u8 frag_num; __u8 seq_num; __le32 len; /* MUST be of word size due to PIO write requirements */ __le32 csum; __le16 csum_offset; __le16 flags; __u16 first_2_bytes; __u8 unused[2]; /* currently unused */ }; /* IB - LRH header consts */ #define IPATH_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */ #define IPATH_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */ /* misc. */ #define SIZE_OF_CRC 1 #define IPATH_DEFAULT_P_KEY 0xFFFF #define IPATH_PERMISSIVE_LID 0xFFFF #define IPATH_AETH_CREDIT_SHIFT 24 #define IPATH_AETH_CREDIT_MASK 0x1F #define IPATH_AETH_CREDIT_INVAL 0x1F #define IPATH_PSN_MASK 0xFFFFFF #define IPATH_MSN_MASK 0xFFFFFF #define IPATH_QPN_MASK 0xFFFFFF #define IPATH_MULTICAST_LID_BASE 0xC000 #define IPATH_EAGER_TID_ID INFINIPATH_I_TID_MASK #define IPATH_MULTICAST_QPN 0xFFFFFF /* Receive Header Queue: receive type (from infinipath) */ #define RCVHQ_RCV_TYPE_EXPECTED 0 #define RCVHQ_RCV_TYPE_EAGER 1 #define RCVHQ_RCV_TYPE_NON_KD 2 #define RCVHQ_RCV_TYPE_ERROR 3 /* sub OpCodes - ith4x */ #define IPATH_ITH4X_OPCODE_ENCAP 0x81 #define IPATH_ITH4X_OPCODE_LID_ARP 0x82 #define IPATH_HEADER_QUEUE_WORDS 9 /* functions for extracting fields from rcvhdrq entries for the driver. */ static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf) { return __le32_to_cpu(rbuf[1]) & INFINIPATH_RHF_H_ERR_MASK; } static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf) { return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT) & INFINIPATH_RHF_RCVTYPE_MASK; } static inline __u32 ipath_hdrget_length_in_bytes(const __le32 * rbuf) { return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT) & INFINIPATH_RHF_LENGTH_MASK) << 2; } static inline __u32 ipath_hdrget_index(const __le32 * rbuf) { return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT) & INFINIPATH_RHF_EGRINDEX_MASK; } static inline __u32 ipath_hdrget_seq(const __le32 *rbuf) { return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_SEQ_SHIFT) & INFINIPATH_RHF_SEQ_MASK; } static inline __u32 ipath_hdrget_offset(const __le32 *rbuf) { return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_HDRQ_OFFSET_SHIFT) & INFINIPATH_RHF_HDRQ_OFFSET_MASK; } static inline __u32 ipath_hdrget_use_egr_buf(const __le32 *rbuf) { return __le32_to_cpu(rbuf[0]) & INFINIPATH_RHF_L_USE_EGR; } static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword) { return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT) & INFINIPATH_I_VERS_MASK; } #endif /* _IPATH_COMMON_H */