/* SPDX-License-Identifier: GPL-2.0 */ /* * This is part of rtl8187 OpenSource driver. * Copyright (C) Andrea Merello 2004-2005 * * Parts of this driver are based on the GPL part of the * official Realtek driver. * Parts of this driver are based on the rtl8180 driver skeleton * from Patric Schenke & Andres Salomon. * Parts of this driver are based on the Intel Pro Wireless * 2100 GPL driver. * * We want to thank the Authors of those projects * and the Ndiswrapper project Authors. */ /* Mariusz Matuszek added full registers definition with Realtek's name */ /* this file contains register definitions for the rtl8187 MAC controller */ #ifndef R8192_HW #define R8192_HW #define RTL8187_REQT_READ 0xc0 #define RTL8187_REQT_WRITE 0x40 #define RTL8187_REQ_GET_REGS 0x05 #define RTL8187_REQ_SET_REGS 0x05 #define MAX_TX_URB 5 #define MAX_RX_URB 16 #define R8180_MAX_RETRY 255 #define RX_URB_SIZE 9100 #define RTL8190_EEPROM_ID 0x8129 #define EEPROM_VID 0x02 #define EEPROM_PID 0x04 #define EEPROM_NODE_ADDRESS_BYTE_0 0x0C #define EEPROM_TX_POWER_DIFF 0x1F #define EEPROM_THERMAL_METER 0x20 #define EEPROM_PW_DIFF 0x21 //0x21 #define EEPROM_CRYSTAL_CAP 0x22 //0x22 #define EEPROM_TX_PW_INDEX_CCK 0x23 //0x23 #define EEPROM_TX_PW_INDEX_OFDM_24G 0x24 //0x24~0x26 #define EEPROM_TX_PW_INDEX_CCK_V1 0x29 //0x29~0x2B #define EEPROM_TX_PW_INDEX_OFDM_24G_V1 0x2C //0x2C~0x2E #define EEPROM_TX_PW_INDEX_VER 0x27 //0x27 #define EEPROM_DEFAULT_THERNAL_METER 0x7 #define EEPROM_DEFAULT_PW_DIFF 0x4 #define EEPROM_DEFAULT_CRYSTAL_CAP 0x5 #define EEPROM_DEFAULT_TX_POWER 0x1010 #define EEPROM_CUSTOMER_ID 0x7B //0x7B:CustomerID #define EEPROM_CHANNEL_PLAN 0x16 //0x7C #define EEPROM_CID_RUNTOP 0x2 #define EEPROM_CID_DLINK 0x8 #define AC_PARAM_TXOP_LIMIT_OFFSET 16 #define AC_PARAM_ECW_MAX_OFFSET 12 #define AC_PARAM_ECW_MIN_OFFSET 8 #define AC_PARAM_AIFS_OFFSET 0 //#endif enum _RTL8192Usb_HW { MAC0 = 0x000, MAC4 = 0x004, #define BB_GLOBAL_RESET_BIT 0x1 BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register BSSIDR = 0x02E, // BSSID Register CMDR = 0x037, // Command register #define CR_RE 0x08 #define CR_TE 0x04 SIFS = 0x03E, // SIFS register #define TCR_MXDMA_2048 7 #define TCR_LRL_OFFSET 0 #define TCR_SRL_OFFSET 8 #define TCR_MXDMA_OFFSET 21 #define TCR_SAT BIT(24) // Enable Rate depedent ack timeout timer RCR = 0x044, // Receive Configuration Register #define MAC_FILTER_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(5) | \ BIT(12) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | \ BIT(22) | BIT(23)) #define RX_FIFO_THRESHOLD_MASK (BIT(13) | BIT(14) | BIT(15)) #define RX_FIFO_THRESHOLD_SHIFT 13 #define RX_FIFO_THRESHOLD_NONE 7 #define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10)) #define RCR_MXDMA_OFFSET 8 #define RCR_FIFO_OFFSET 13 #define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size. #define RCR_CBSSID BIT(23) // Accept BSSID match packet #define RCR_APWRMGT BIT(22) // Accept power management packet #define RCR_AMF BIT(20) // Accept management type frame #define RCR_ACF BIT(19) // Accept control type frame #define RCR_ADF BIT(18) // Accept data type frame #define RCR_AICV BIT(12) // Accept ICV error packet #define RCR_ACRC32 BIT(5) // Accept CRC32 error packet #define RCR_AB BIT(3) // Accept broadcast packet #define RCR_AM BIT(2) // Accept multicast packet #define RCR_APM BIT(1) // Accept physical match packet #define RCR_AAP BIT(0) // Accept all unicast packet SLOT_TIME = 0x049, // Slot Time Register ACK_TIMEOUT = 0x04c, // Ack Timeout Register EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI BCN_TCFG = 0x062, // Beacon Time Configuration #define BCN_TCFG_CW_SHIFT 8 #define BCN_TCFG_IFS 0 BCN_INTERVAL = 0x070, // Beacon Interval (TU) ATIMWND = 0x072, // ATIM Window Size (TU) BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA BCN_ERR_THRESH = 0x078, // Beacon Error Threshold RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd WCAMI = 0x0A4, // Software write CAM input content SECR = 0x0B0, //Security Configuration Register #define SCR_TxUseDK BIT(0) //Force Tx Use Default Key #define SCR_RxUseDK BIT(1) //Force Rx Use Default Key #define SCR_TxEncEnable BIT(2) //Enable Tx Encryption #define SCR_RxDecEnable BIT(3) //Enable Rx Decryption #define SCR_SKByA2 BIT(4) //Search kEY BY A2 #define SCR_NoSKMC BIT(5) //No Key Search for Multicast //---------------------------------------------------------------------------- // 8190 CPU General Register (offset 0x100, 4 byte) //---------------------------------------------------------------------------- #define CPU_CCK_LOOPBACK 0x00030000 #define CPU_GEN_SYSTEM_RESET 0x00000001 #define CPU_GEN_FIRMWARE_RESET 0x00000008 #define CPU_GEN_BOOT_RDY 0x00000010 #define CPU_GEN_FIRM_RDY 0x00000020 #define CPU_GEN_PUT_CODE_OK 0x00000080 #define CPU_GEN_BB_RST 0x00000100 #define CPU_GEN_PWR_STB_CPU 0x00000004 #define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 #define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 CPU_GEN = 0x100, // CPU Reset Register AcmHwCtrl = 0x171, // ACM Hardware Control Register //---------------------------------------------------------------------------- //// //// 8190 AcmHwCtrl bits (offset 0x171, 1 byte) ////---------------------------------------------------------------------------- // #define AcmHw_BeqEn BIT(1) RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public, QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID #define BW_OPMODE_5G BIT(1) #define BW_OPMODE_20MHZ BIT(2) BW_OPMODE = 0x300, // Bandwidth operation mode MSR = 0x303, // Media Status register #define MSR_LINK_MASK (BIT(0)|BIT(1)) #define MSR_LINK_MANAGED 2 #define MSR_LINK_NONE 0 #define MSR_LINK_SHIFT 0 #define MSR_LINK_ADHOC 1 #define MSR_LINK_MASTER 3 RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long #define RETRY_LIMIT_SHORT_SHIFT 8 #define RETRY_LIMIT_LONG_SHIFT 0 RRSR = 0x310, // Response Rate Set #define RRSR_1M BIT(0) #define RRSR_2M BIT(1) #define RRSR_5_5M BIT(2) #define RRSR_11M BIT(3) #define RRSR_6M BIT(4) #define RRSR_9M BIT(5) #define RRSR_12M BIT(6) #define RRSR_18M BIT(7) #define RRSR_24M BIT(8) #define RRSR_36M BIT(9) #define RRSR_48M BIT(10) #define RRSR_54M BIT(11) #define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not. UFWP = 0x318, RATR0 = 0x320, // Rate Adaptive Table register1 DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI //---------------------------------------------------------------------------- // 8190 Rate Adaptive Table Register (offset 0x320, 4 byte) //---------------------------------------------------------------------------- //CCK #define RATR_1M 0x00000001 #define RATR_2M 0x00000002 #define RATR_55M 0x00000004 #define RATR_11M 0x00000008 //OFDM #define RATR_6M 0x00000010 #define RATR_9M 0x00000020 #define RATR_12M 0x00000040 #define RATR_18M 0x00000080 #define RATR_24M 0x00000100 #define RATR_36M 0x00000200 #define RATR_48M 0x00000400 #define RATR_54M 0x00000800 //MCS 1 Spatial Stream #define RATR_MCS0 0x00001000 #define RATR_MCS1 0x00002000 #define RATR_MCS2 0x00004000 #define RATR_MCS3 0x00008000 #define RATR_MCS4 0x00010000 #define RATR_MCS5 0x00020000 #define RATR_MCS6 0x00040000 #define RATR_MCS7 0x00080000 //MCS 2 Spatial Stream #define RATR_MCS8 0x00100000 #define RATR_MCS9 0x00200000 #define RATR_MCS10 0x00400000 #define RATR_MCS11 0x00800000 #define RATR_MCS12 0x01000000 #define RATR_MCS13 0x02000000 #define RATR_MCS14 0x04000000 #define RATR_MCS15 0x08000000 // ALL CCK Rate #define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M #define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\ |RATR_36M|RATR_48M|RATR_54M #define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \ RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7 #define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \ RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15 EPROM_CMD = 0xfe58, #define Cmd9346CR_9356SEL BIT(4) #define EPROM_CMD_OPERATING_MODE_SHIFT 6 #define EPROM_CMD_NORMAL 0 #define EPROM_CMD_PROGRAM 2 #define EPROM_CS_BIT BIT(3) #define EPROM_CK_BIT BIT(2) #define EPROM_W_BIT BIT(1) #define EPROM_R_BIT BIT(0) }; //---------------------------------------------------------------------------- // 818xB AnaParm & AnaParm2 Register //---------------------------------------------------------------------------- #define GPI 0x108 #endif