/* ///////////////////////////////////////////////////////////////////////// */ /* */ /* Copyright (c) Atmel Corporation. All rights reserved. */ /* */ /* Module Name: wilc_wlan_if.h */ /* */ /* */ /* ///////////////////////////////////////////////////////////////////////// */ #ifndef WILC_WLAN_IF_H #define WILC_WLAN_IF_H #include #include "linux_wlan_common.h" /******************************************** * * Debug Flags * ********************************************/ #define N_INIT 0x00000001 #define N_ERR 0x00000002 #define N_TXQ 0x00000004 #define N_INTR 0x00000008 #define N_RXQ 0x00000010 /******************************************** * * Host Interface Defines * ********************************************/ #define HIF_SDIO (0) #define HIF_SPI BIT(0) #define HIF_SDIO_GPIO_IRQ BIT(2) /******************************************** * * Tx/Rx Buffer Size Defines * ********************************************/ #define CE_TX_BUFFER_SIZE (64 * 1024) #define CE_RX_BUFFER_SIZE (384 * 1024) /******************************************** * * Wlan Interface Defines * ********************************************/ typedef struct { u32 read_write: 1; u32 function: 3; u32 raw: 1; u32 address: 17; u32 data: 8; } sdio_cmd52_t; typedef struct { /* struct { */ u32 read_write: 1; u32 function: 3; u32 block_mode: 1; u32 increment: 1; u32 address: 17; u32 count: 9; /* } bit; */ u8 *buffer; u32 block_size; } sdio_cmd53_t; typedef struct { int io_type; int (*io_init)(void *); void (*io_deinit)(void *); union { struct { int (*sdio_cmd52)(sdio_cmd52_t *); int (*sdio_cmd53)(sdio_cmd53_t *); int (*sdio_set_max_speed)(void); int (*sdio_set_default_speed)(void); } sdio; struct { int (*spi_max_speed)(void); int (*spi_tx)(u8 *, u32); int (*spi_rx)(u8 *, u32); int (*spi_trx)(u8 *, u8 *, u32); } spi; } u; } wilc_wlan_io_func_t; #define WILC_MAC_INDICATE_STATUS 0x1 #define WILC_MAC_STATUS_INIT -1 #define WILC_MAC_STATUS_READY 0 #define WILC_MAC_STATUS_CONNECT 1 #define WILC_MAC_INDICATE_SCAN 0x2 typedef struct { void *os_private; } wilc_wlan_os_context_t; typedef struct { wilc_wlan_os_context_t os_context; wilc_wlan_io_func_t io_func; } wilc_wlan_inp_t; struct tx_complete_data { int size; void *buff; u8 *pBssid; struct sk_buff *skb; }; typedef void (*wilc_tx_complete_func_t)(void *, int); #define WILC_TX_ERR_NO_BUF (-2) /******************************************** * * Wlan Configuration ID * ********************************************/ #define MAX_SSID_LEN 33 #define MAX_RATES_SUPPORTED 12 #define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF) typedef enum { SUPP_RATES_IE = 1, EXT_SUPP_RATES_IE = 50, HT_CAPABILITY_IE = 45, RSN_IE = 48, WPA_IE = 221, WMM_IE = 221, P2P_IE = 221, } BEACON_IE; typedef enum { INFRASTRUCTURE = 0, INDEPENDENT, AP, } BSSTYPE_T; typedef enum { RATE_AUTO = 0, RATE_1MB = 1, RATE_2MB = 2, RATE_5MB = 5, RATE_6MB = 6, RATE_9MB = 9, RATE_11MB = 11, RATE_12MB = 12, RATE_18MB = 18, RATE_24MB = 24, RATE_26MB = 36, RATE_48MB = 48, RATE_54MB = 54 } TX_RATE_T; typedef enum { B_ONLY_MODE = 0, /* 1, 2 M, otherwise 5, 11 M */ G_ONLY_MODE, /* 6,12,24 otherwise 9,18,36,48,54 */ G_MIXED_11B_1_MODE, /* 1,2,5.5,11 otherwise all on */ G_MIXED_11B_2_MODE, /* 1,2,5,11,6,12,24 otherwise all on */ } G_OPERATING_MODE_T; typedef enum { G_SHORT_PREAMBLE = 0, /* Short Preamble */ G_LONG_PREAMBLE = 1, /* Long Preamble */ G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */ } G_PREAMBLE_T; #define MAC_CONNECTED 1 #define MAC_DISCONNECTED 0 #define SCAN_DONE TRUE typedef enum { PASSIVE_SCAN = 0, ACTIVE_SCAN = 1, } SCANTYPE_T; typedef enum { NO_POWERSAVE = 0, MIN_FAST_PS = 1, MAX_FAST_PS = 2, MIN_PSPOLL_PS = 3, MAX_PSPOLL_PS = 4 } USER_PS_MODE_T; typedef enum { CHIP_WAKEDUP = 0, CHIP_SLEEPING_AUTO = 1, CHIP_SLEEPING_MANUAL = 2 } CHIP_PS_STATE_T; typedef enum { ACQUIRE_ONLY = 0, ACQUIRE_AND_WAKEUP = 1, } BUS_ACQUIRE_T; typedef enum { RELEASE_ONLY = 0, RELEASE_ALLOW_SLEEP = 1, } BUS_RELEASE_T; typedef enum { NO_SECURITY = 0, WEP_40 = 0x3, WEP_104 = 0x7, WPA_AES = 0x29, WPA_TKIP = 0x49, WPA_AES_TKIP = 0x69, /* Aes or Tkip */ WPA2_AES = 0x31, WPA2_TKIP = 0x51, WPA2_AES_TKIP = 0x71, /* Aes or Tkip */ } SECURITY_T; enum AUTHTYPE { OPEN_SYSTEM = 1, SHARED_KEY = 2, ANY = 3, IEEE8021 = 5 }; enum SITESURVEY { SITE_SURVEY_1CH = 0, SITE_SURVEY_ALL_CH = 1, SITE_SURVEY_OFF = 2 }; typedef enum { NORMAL_ACK = 0, NO_ACK, } ACK_POLICY_T; typedef enum { DONT_RESET = 0, DO_RESET = 1, NO_REQUEST = 2, } RESET_REQ_T; typedef enum { REKEY_DISABLE = 1, REKEY_TIME_BASE, REKEY_PKT_BASE, REKEY_TIME_PKT_BASE } RSNA_REKEY_POLICY_T; typedef enum { FILTER_NO = 0x00, FILTER_AP_ONLY = 0x01, FILTER_STA_ONLY = 0x02 } SCAN_CLASS_FITLER_T; typedef enum { PRI_HIGH_RSSI = 0x00, PRI_LOW_RSSI = 0x04, PRI_DETECT = 0x08 } SCAN_PRI_T; typedef enum { CH_FILTER_OFF = 0x00, CH_FILTER_ON = 0x10 } CH_FILTER_T; typedef enum { AUTO_PROT = 0, /* Auto */ NO_PROT, /* Do not use any protection */ ERP_PROT, /* Protect all ERP frame exchanges */ HT_PROT, /* Protect all HT frame exchanges */ GF_PROT, /* Protect all GF frame exchanges */ } N_PROTECTION_MODE_T; typedef enum { G_SELF_CTS_PROT, G_RTS_CTS_PROT, } G_PROTECTION_MODE_T; typedef enum { HT_MIXED_MODE = 1, HT_ONLY_20MHZ_MODE, HT_ONLY_20_40MHZ_MODE, } N_OPERATING_MODE_T; typedef enum { NO_DETECT = 0, DETECT_ONLY = 1, DETECT_PROTECT = 2, DETECT_PROTECT_REPORT = 3, } N_OBSS_DETECTION_T; typedef enum { RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */ FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */ LSIG_TXOP_PROT, /* LSIG TXOP Protection */ FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */ } N_PROTECTION_TYPE_T; typedef enum { STATIC_MODE = 1, DYNAMIC_MODE = 2, MIMO_MODE = 3, /* power save disable */ } N_SMPS_MODE_T; typedef enum { DISABLE_SELF_CTS, ENABLE_SELF_CTS, DISABLE_TX_ABORT, ENABLE_TX_ABORT, HW_TRIGGER_ABORT, SW_TRIGGER_ABORT, } TX_ABORT_OPTION_T; enum WID_TYPE { WID_CHAR = 0, WID_SHORT = 1, WID_INT = 2, WID_STR = 3, WID_BIN_DATA = 4, WID_BIN = 5, WID_IP = 6, WID_ADR = 7, WID_UNDEF = 8, WID_TYPE_FORCE_32BIT = 0xFFFFFFFF }; typedef enum { WID_NIL = 0xffff, /* * BSS Type * ----------------------------------------------------------- * Configuration : Infrastructure Independent Access Point * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_BSS_TYPE = 0x0000, /* * Transmit Rate * ----------------------------------------------------------- * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 * ----------------------------------------------------------- */ WID_CURRENT_TX_RATE = 0x0001, /* * Channel * ----------------------------------------------------------- * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 * ----------------------------------------------------------- */ WID_CURRENT_CHANNEL = 0x0002, /* * Preamble * ----------------------------------------------------------- * Configuration : short long Auto * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_PREAMBLE = 0x0003, /* * 11g operating mode (ignored if 11g not present) * ----------------------------------------------------------- * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) * Values to set : 1 2 3 * ----------------------------------------------------------- */ WID_11G_OPERATING_MODE = 0x0004, /* * Mac status (response only) * ----------------------------------------------------------- * Configuration : disconnect connect * Values to get : 0 1 * ----------------------------------------------------------- */ WID_STATUS = 0x0005, /* * Scan type * ----------------------------------------------------------- * Configuration : Passive Scanning Active Scanning * Values to set : 0 1 * ----------------------------------------------------------- */ WID_SCAN_TYPE = 0x0007, /* * Key Id (WEP default key Id) * ----------------------------------------------------------- * Configuration : Any value between 0 to 3 * Values to set : Same value. Default is 0 * ----------------------------------------------------------- */ WID_KEY_ID = 0x0009, /* * QoS Enable * ----------------------------------------------------------- * Configuration : QoS Disable WMM Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_QOS_ENABLE = 0x000A, /* * Power Management * ----------------------------------------------------------- * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_POWER_MANAGEMENT = 0x000B, /* * WEP/802 11I Configuration * ----------------------------------------------------------- * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP * Values (0x) : 00 03 07 29 49 31 51 * Configuration:WPA-AES+TKIP RSN-AES+TKIP * Values (0x) : 69 71 * ----------------------------------------------------------- */ WID_11I_MODE = 0x000C, /* * WEP Configuration: Used in BSS STA mode only when WEP is enabled * ----------------------------------------------------------- * Configuration : Open System Shared Key Any Type | 802.1x Auth * Values (0x) : 01 02 03 | BIT2 * ----------------------------------------------------------- */ WID_AUTH_TYPE = 0x000D, /* * Site Survey Type * ----------------------------------------------------------- * Configuration : Values to set * Survey 1 Channel : 0 * survey all Channels : 1 * Disable Site Survey : 2 * ----------------------------------------------------------- */ WID_SITE_SURVEY = 0x000E, /* * Listen Interval * ----------------------------------------------------------- * Configuration : Any value between 1 to 255 * Values to set : Same value. Default is 3 * ----------------------------------------------------------- */ WID_LISTEN_INTERVAL = 0x000F, /* * DTIM Period * ----------------------------------------------------------- * Configuration : Any value between 1 to 255 * Values to set : Same value. Default is 3 * ----------------------------------------------------------- */ WID_DTIM_PERIOD = 0x0010, /* * ACK Policy * ----------------------------------------------------------- * Configuration : Normal Ack No Ack * Values to set : 0 1 * ----------------------------------------------------------- */ WID_ACK_POLICY = 0x0011, /* * Reset MAC (Set only) * ----------------------------------------------------------- * Configuration : Don't Reset Reset No Request * Values to set : 0 1 2 * ----------------------------------------------------------- */ WID_RESET = 0x0012, /* * Broadcast SSID Option: Setting this will adhere to "" SSID element * ----------------------------------------------------------- * Configuration : Enable Disable * Values to set : 1 0 * ----------------------------------------------------------- */ WID_BCAST_SSID = 0x0015, /* * Disconnect (Station) * ----------------------------------------------------------- * Configuration : Association ID * Values to set : Association ID * ----------------------------------------------------------- */ WID_DISCONNECT = 0x0016, /* * 11a Tx Power Level * ----------------------------------------------------------- * Configuration : Sets TX Power (Higher the value greater the power) * Values to set : Any value between 0 and 63 (inclusive Default 48) * ----------------------------------------------------------- */ WID_TX_POWER_LEVEL_11A = 0x0018, /* * Group Key Update Policy Selection * ----------------------------------------------------------- * Configuration : Disabled timeBased packetBased timePacketBased * Values to set : 1 2 3 4 * ----------------------------------------------------------- */ WID_REKEY_POLICY = 0x0019, /* * Allow Short Slot * ----------------------------------------------------------- * Configuration : Disallow Short Slot Allow Short Slot * (Enable Only Long Slot) (Enable Short Slot if applicable) * Values to set : 0 1 * ----------------------------------------------------------- */ WID_SHORT_SLOT_ALLOWED = 0x001A, WID_PHY_ACTIVE_REG = 0x001B, /* * 11b Tx Power Level * ----------------------------------------------------------- * Configuration : Sets TX Power (Higher the value greater the power) * Values to set : Any value between 0 and 63 (inclusive Default 48) * ----------------------------------------------------------- */ WID_TX_POWER_LEVEL_11B = 0x001D, /* * Scan Request * ----------------------------------------------------------- * Configuration : Request default scan * Values to set : 0 * ----------------------------------------------------------- */ WID_START_SCAN_REQ = 0x001E, /* * Rssi (get only) * ----------------------------------------------------------- * Configuration : * Values to get : Rssi value * ----------------------------------------------------------- */ WID_RSSI = 0x001F, /* * Join Request * ----------------------------------------------------------- * Configuration : Request to join * Values to set : index of scan result * ----------------------------------------------------------- */ WID_JOIN_REQ = 0x0020, WID_LINKSPEED = 0x0026, /* * Enable User Control of TX Power * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_USER_CONTROL_ON_TX_POWER = 0x0027, WID_MEMORY_ACCESS_8BIT = 0x0029, /* * Enable Auto RX Sensitivity feature * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_AUTO_RX_SENSITIVITY = 0x0032, /* * Receive Buffer Based Ack * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_DATAFLOW_CONTROL = 0x0033, /* * Scan Filter * ----------------------------------------------------------- * Configuration : Class No filter AP only Station Only * Values to set : 0 1 2 * Configuration : Priority High Rssi Low Rssi Detect * Values to set : 0 0x4 0x0 * Configuration : Channel filter off filter on * Values to set : 0 0x10 * ----------------------------------------------------------- */ WID_SCAN_FILTER = 0x0036, /* * Link Loss Threshold (measure in the beacon period) * ----------------------------------------------------------- * Configuration : Any value between 10 and 254(Set to 255 disable) * Values to set : Same value. Default is 10 * ----------------------------------------------------------- */ WID_LINK_LOSS_THRESHOLD = 0x0037, WID_ABORT_RUNNING_SCAN = 0x003E, /* NMAC Character WID list */ WID_WPS_START = 0x0043, /* * Protection mode for MAC * ----------------------------------------------------------- * Configuration : Auto No protection ERP HT GF * Values to set : 0 1 2 3 4 * ----------------------------------------------------------- */ WID_11N_PROT_MECH = 0x0080, /* * ERP Protection type for MAC * ----------------------------------------------------------- * Configuration : Self-CTS RTS-CTS * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_ERP_PROT_TYPE = 0x0081, /* * HT Option Enable * ----------------------------------------------------------- * Configuration : HT Enable HT Disable * Values to set : 1 0 * ----------------------------------------------------------- */ WID_11N_ENABLE = 0x0082, /* * 11n Operating mode (Note that 11g operating mode will also be * used in addition to this, if this is set to HT Mixed mode) * ----------------------------------------------------------- * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz * Values to set : 1 2 3 * ----------------------------------------------------------- */ WID_11N_OPERATING_MODE = 0x0083, /* * 11n OBSS non-HT STA Detection flag * ----------------------------------------------------------- * Configuration : Do not detect * Values to set : 0 * Configuration : Detect, do not protect or report * Values to set : 1 * Configuration : Detect, protect and do not report * Values to set : 2 * Configuration : Detect, protect and report to other BSS * Values to set : 3 * ----------------------------------------------------------- */ WID_11N_OBSS_NONHT_DETECTION = 0x0084, /* * 11n HT Protection Type * ----------------------------------------------------------- * Configuration : RTS-CTS First Frame Exchange at non-HT-rate * Values to set : 0 1 * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt * Values to set : 2 3 * ----------------------------------------------------------- */ WID_11N_HT_PROT_TYPE = 0x0085, /* * 11n RIFS Protection Enable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_RIFS_PROT_ENABLE = 0x0086, /* * SMPS Mode * ----------------------------------------------------------- * Configuration : Static Dynamic MIMO (Power Save Disabled) * Values to set : 1 2 3 * ----------------------------------------------------------- */ WID_11N_SMPS_MODE = 0x0087, /* * Current transmit MCS * ----------------------------------------------------------- * Configuration : MCS Index for data rate * Values to set : 0 to 7 * ----------------------------------------------------------- */ WID_11N_CURRENT_TX_MCS = 0x0088, WID_11N_PRINT_STATS = 0x0089, /* * 11n Short GI Enable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_SHORT_GI_ENABLE = 0x008D, /* * 11n RIFS Enable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_RIFS_MODE = 0x0094, /* * TX Abort Feature * ----------------------------------------------------------- * Configuration : Disable Self CTS Enable Self CTS * Values to set : 0 1 * Configuration : Disable TX Abort Enable TX Abort * Values to set : 2 3 * Configuration : Enable HW TX Abort Enable SW TX Abort * Values to set : 4 5 * ----------------------------------------------------------- */ WID_TX_ABORT_CONFIG = 0x00A1, WID_REG_TSSI_11B_VALUE = 0x00A6, WID_REG_TSSI_11G_VALUE = 0x00A7, WID_REG_TSSI_11N_VALUE = 0x00A8, WID_TX_CALIBRATION = 0x00A9, WID_DSCR_TSSI_11B_VALUE = 0x00AA, WID_DSCR_TSSI_11G_VALUE = 0x00AB, WID_DSCR_TSSI_11N_VALUE = 0x00AC, /* * Immediate Block-Ack Support * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 0 1 * ----------------------------------------------------------- */ WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, /* * TXOP Disable Flag * ----------------------------------------------------------- * Configuration : Disable Enable * Values to set : 1 0 * ----------------------------------------------------------- */ WID_11N_TXOP_PROT_DISABLE = 0x00B0, WID_TX_POWER_LEVEL_11N = 0x00B1, /* Custom Character WID list */ WID_PC_TEST_MODE = 0x00C8, /* SCAN Complete notification WID*/ WID_SCAN_COMPLETE = 0x00C9, WID_DEL_BEACON = 0x00CA, WID_LOGTerminal_Switch = 0x00CD, /* EMAC Short WID list */ /* RTS Threshold */ /* * ----------------------------------------------------------- * Configuration : Any value between 256 to 2347 * Values to set : Same value. Default is 2347 * ----------------------------------------------------------- */ WID_RTS_THRESHOLD = 0x1000, /* * Fragmentation Threshold * ----------------------------------------------------------- * Configuration : Any value between 256 to 2346 * Values to set : Same value. Default is 2346 * ----------------------------------------------------------- */ WID_FRAG_THRESHOLD = 0x1001, WID_SHORT_RETRY_LIMIT = 0x1002, WID_LONG_RETRY_LIMIT = 0x1003, WID_BEACON_INTERVAL = 0x1006, WID_MEMORY_ACCESS_16BIT = 0x1008, WID_RX_SENSE = 0x100B, WID_ACTIVE_SCAN_TIME = 0x100C, WID_PASSIVE_SCAN_TIME = 0x100D, WID_SITE_SURVEY_SCAN_TIME = 0x100E, WID_JOIN_START_TIMEOUT = 0x100F, WID_AUTH_TIMEOUT = 0x1010, WID_ASOC_TIMEOUT = 0x1011, WID_11I_PROTOCOL_TIMEOUT = 0x1012, WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, /* NMAC Short WID list */ WID_11N_SIG_QUAL_VAL = 0x1085, WID_CCA_THRESHOLD = 0x1087, /* Custom Short WID list */ /* EMAC Integer WID list */ WID_FAILED_COUNT = 0x2000, WID_RETRY_COUNT = 0x2001, WID_MULTIPLE_RETRY_COUNT = 0x2002, WID_FRAME_DUPLICATE_COUNT = 0x2003, WID_ACK_FAILURE_COUNT = 0x2004, WID_RECEIVED_FRAGMENT_COUNT = 0x2005, WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, WID_FCS_ERROR_COUNT = 0x2007, WID_SUCCESS_FRAME_COUNT = 0x2008, WID_HUT_TX_COUNT = 0x200A, WID_TX_FRAGMENT_COUNT = 0x200B, WID_TX_MULTICAST_FRAME_COUNT = 0x200C, WID_RTS_SUCCESS_COUNT = 0x200D, WID_RTS_FAILURE_COUNT = 0x200E, WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, WID_REKEY_PERIOD = 0x2010, WID_REKEY_PACKET_COUNT = 0x2011, WID_1X_SERV_ADDR = 0x2012, WID_STACK_IP_ADDR = 0x2013, WID_STACK_NETMASK_ADDR = 0x2014, WID_HW_RX_COUNT = 0x2015, WID_MEMORY_ADDRESS = 0x201E, WID_MEMORY_ACCESS_32BIT = 0x201F, WID_RF_REG_VAL = 0x2021, /* NMAC Integer WID list */ WID_11N_PHY_ACTIVE_REG_VAL = 0x2080, /* Custom Integer WID list */ WID_GET_INACTIVE_TIME = 0x2084, WID_SET_DRV_HANDLER = 0X2085, WID_SET_OPERATION_MODE = 0X2086, /* EMAC String WID list */ WID_SSID = 0x3000, WID_FIRMWARE_VERSION = 0x3001, WID_OPERATIONAL_RATE_SET = 0x3002, WID_BSSID = 0x3003, WID_WEP_KEY_VALUE = 0x3004, WID_11I_PSK = 0x3008, WID_11E_P_ACTION_REQ = 0x3009, WID_1X_KEY = 0x300A, WID_HARDWARE_VERSION = 0x300B, WID_MAC_ADDR = 0x300C, WID_HUT_DEST_ADDR = 0x300D, WID_PHY_VERSION = 0x300F, WID_SUPP_USERNAME = 0x3010, WID_SUPP_PASSWORD = 0x3011, WID_SITE_SURVEY_RESULTS = 0x3012, WID_RX_POWER_LEVEL = 0x3013, WID_DEL_ALL_RX_BA = 0x3014, WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, WID_ADD_WEP_KEY = 0x3019, WID_REMOVE_WEP_KEY = 0x301A, WID_ADD_PTK = 0x301B, WID_ADD_RX_GTK = 0x301C, WID_ADD_TX_GTK = 0x301D, WID_REMOVE_KEY = 0x301E, WID_ASSOC_REQ_INFO = 0x301F, WID_ASSOC_RES_INFO = 0x3020, WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ /* NMAC String WID list */ WID_11N_P_ACTION_REQ = 0x3080, WID_HUT_TEST_ID = 0x3081, WID_PMKID_INFO = 0x3082, WID_FIRMWARE_INFO = 0x3083, WID_REGISTER_FRAME = 0x3084, WID_DEL_ALL_STA = 0x3085, WID_REMAIN_ON_CHAN = 0x3996, WID_SSID_PROBE_REQ = 0x3997, WID_JOIN_REQ_EXTENDED = 0x3998, WID_IP_ADDRESS = 0x3999, /* Custom String WID list */ /* EMAC Binary WID list */ WID_UAPSD_CONFIG = 0x4001, WID_UAPSD_STATUS = 0x4002, WID_WMM_AP_AC_PARAMS = 0x4003, WID_WMM_STA_AC_PARAMS = 0x4004, WID_NETWORK_INFO = 0x4005, WID_STA_JOIN_INFO = 0x4006, WID_CONNECTED_STA_LIST = 0x4007, /* NMAC Binary WID list */ WID_11N_AUTORATE_TABLE = 0x4080, WID_SCAN_CHANNEL_LIST = 0x4084, WID_INFO_ELEMENT_PROBE = 0x4085, WID_INFO_ELEMENT_ASSOCIATE = 0x4086, WID_ADD_STA = 0X4087, WID_REMOVE_STA = 0X4088, WID_EDIT_STA = 0X4089, WID_ADD_BEACON = 0x408a, WID_SETUP_MULTICAST_FILTER = 0x408b, /* Miscellaneous WIDs */ WID_ALL = 0x7FFE, WID_MAX = 0xFFFF } WID_T; int wilc_wlan_init(wilc_wlan_inp_t *inp); void wilc_bus_set_max_speed(void); void wilc_bus_set_default_speed(void); u32 wilc_get_chipid(u8 update); #endif